Part of the "Kevin John Herdman", No. 397661 Collection. See cat No. 5942P or details of his service.Green plastic waterproof coat with belt. Belt has a buckle for adjustment. Mesh vent across back covered with a flap. Two vents at shoulder level on front. Metal vent holes under arms. Front closed with buttons. Two side pockets. Sizing label on inside neck. Manufacturers label on inside left.On sizing label: 40L, CLASS 8405, 66-018-1274, 8305-66-018-0450'. Stamped on sizing label: 'BRK, 70, 70". Handwritten on sizing label: 'K. HERDMAN'. On Manufacturer's label: 'M.PENNISI, CLOTHNG CO. PTY LTD, VICTORIA, 1970 (upwards arrow ^).accessory, waterproof coat, australian army, kevin john herdman

Envelopes used by the Department of Transport when located at 589 Collins St Melbourne. Has the logo and return address details printed on it. The large one would have been used for A3 size documents. The medium size for specially printed document as it does not match a standard size envelope and the DL for sending out invoices and of letters.A stationery that is associated with a now-evolved department body which existed in the 1990s. Set of 2 brown paper envelopes - medium and large - pre-printed for the Department of Transport with a flap that required to be moistened for sealing and one DL size window envelope with return address.public transport, letters, stationery, transport, department of transport

Gloves - part of issue to all personnel in the field.Black leather gloves with some padding on the front and back. Back made of Army Green knitted material and adhesive straps on the wrists to tighten. Material hooks on each wrist. Label on right glove with description, size and cleaning instructions.Label says "Gloves, Combat Army Type 11, Capacitive then cleaning instructions. Size - medium.accessories, gloves

Item from donor's mother (1926-2015) and father (1923-1962)who lived in Camberwell and then from the 1950s in Box Hill.The Boys' Brigade (BB) is an international, interdenominational christian youth organization conceived in Glasgow in1883 which spread quickly across the UK and worldwide. It was founded in Australia in 1890.Black wool felt beret with black ribbon edging and ribbon hanging down back. On the front a metal badge "The Boys' Brigade" with an anchor in the centre with the words "Sure", B B "Steadfast" inside. Size 6 5/8. "The Boys' Brigade", anchor, "Sure", B B "Steadfast" inside. Size 6 5/8.the boys' brigade, beret

Worn by an Australian Navy Warrant OfficerJacket Double Breasted Service Dress Navy Blue with rank insignia, [ Warrant Officer] on lower arms; on the upper arms; shoulder flashes with gold embroided word, "Australia" on both shoulders. 8 gold button with embossed Australian Navy Emblem and the word "Australia" in parallel columns of 4. Size 109R. Manufacturer's identification label on inside right breast.Inscriptions inside pocket 8405.66.132.2318 size.109R match. ADI logo. 5114147 Baumgarton. Trouser size.99R 70% 30% Wool/Poly. Dry clean onlywarrant officer navy australian senior service

Australian Army Issued Slouch Hat.Brown woollen fur felt hat. Pale brown material wrapped around outside of rim. Gold clip attaching left side of hat to crown. Gold colour Rising Sun Emblem on left side but not official Army Emblem. Inside size 61, makers label, cleaning instructions. Black leather rim sewn on the inside of crown.Inside "100% fine wool felt" "Made in Australia" "Size 61" .uniform, slouch hat, army

Pair of black flying boots,lambswool lining, size 8 fitting 6, made by Bedggood, Melbourne, Australia, leather sole with rubber Dunlop heel. Style known as "1936 Pattern" used by Royal Australian Air Force.Internal pull tags, with size 8, fitting 6 on one & "Made by Bedggood, Melbourne, Australia" on the other.flying, boots, bedggood

The drawing provides details of the two sets of springs that fit on either side of the axle box of a Brill 21E four-wheel truck. Gives load, sizes, and material dimensions. Revision E dated 7-11-1958. Prepared by the MTTB for use on four-wheel trams. Original drawing dated 30/9/1927Yields information about Brill 21E truck axle box springs.Drawing Foolscap size with two punched holes on the left hand side.tramcars, 21e trucks, brill 21e, springs, mmtb

This brass cow bell was recovered from the wreck of the sailing ship ‘Loch Ard’ at Mutton Bird Island, near Port Campbell, Victoria, from late 1960s to early 1970s. Cow bells were listed as part of the cargo on board the Loch Ard. This bell is now part of the John Chance collection. Flagstaff Hill Maritime Village’s divers also recovered similar bells from the Loch Ard wreck in 1973. One of them was found in a sandy hole in the centre of the wreck site. All of the recovered cow bells are without their hangers. A bell of this size could have been used by horse or cattle teams. Cow bells were a common Colonial item. They were hung around the necks of grazing domestic cows and goats, bullock and horse teams, even camel teams so that they could be found again. Sheep and cattle drovers used them as a warning for night time disturbances such as wild animals. The maker of the cow bell, James Barwell, was a bell founder established in Birmingham, England, from 1784. In 1842 he acquired Fiddian’s firm of ‘Steam and Water’, keeping its name and stamping it on some of his products. According to his advertisement in the Exhibitors guide for the Church Congress of 1887, he made bells and fittings for churches and schools. He also made bells for cloches and chimes, and made tuned musical handbells. He repaired and reproduced bells, and he had a team of experienced ringers to “inspect towers and report upon the tone and condition of bells and fittings.” In 1903 he became incorporated as a Limited Company, ‘engineers’ and plumbers’ brasswork, and bell founders.’ In 1914 he advertised as ‘Cock and Bell Founders’, specialising in plumbing and engineering fittings, church bells, and “every description of hanging and hand bells.” Some of Barwell’s products were stamped with his maker’s mark (his initials J. B. either side of a cross entwined with a ‘B’ in an oval of oak leaves (for Birmingham)). James Barwell bells were no longer made after 1920. James Barwell was among makers who exported bells to the Australian colony from the 1860s. Early Australian iron animal bells were also made from the 1860s by blacksmiths such as Anthony Morgan from 1861, August Menneke from 1867, and Samuel Jones from 1868. Few brass bells were produced here in those times. This bell is historically significant as typical of a cow bell used by farmers and herdsmen in Colonial Victoria. Its significance is increased by being an artefact recovered by John Chance, a diver from the wreck of the Loch Ard and other wrecks in the late 1960s to early 1970s. Items that come from several wrecks along Victoria's coast have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. The cow bell is also significant for being part of Flagstaff Hill’s collection of artefacts from LOCH ARD, which is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. It is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417). The collection is significant because of the relationship between the objects, as together they have a high potential to interpret the story of the LOCH ARD. The LOCH ARD collection is archaeologically significant as the remains of a large international passenger and cargo ship. The LOCH ARD collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The collection is also historically significant for its association with the LOCH ARD, which was one of the worst and best known shipwrecks in Victoria’s history. Cow bell; heavy brass, flat top, pyramid shape, rectangular head, shoulders flare out to rectangular mouth. The head has two same-sized tooled holes for adding the hanging yoke. Inscription on top and one side. Encrustations are on the metal in places. The hanger and clapper are missing. Made by James Barwell of Birmingham.Stamped on the head "BARWELL / - - - / - - -- ING" [Perhaps BARWELL - - - BIRMING. Could size be in centre? 3 3/4 IN?] Stamped on side [motif] (undecipherable) flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, john chance, loch ard, mutton bird island, glenample, eva carmichael, tom pearce, james barwell, cow bell, horse bell, bell founder, bell smith, vintage bell, birmingham bell foundry, farmer, shepherd, drover, stock bell

Item issued to Robert George Bennetts. Refer 560.3 for service history.Peaked cap, blue with RAAF brass cap badge. Size 6 7/8. Black outer headband, narrow black plastic front strap secured with small brass buttons at either end. Tan inner headband with clear plastic top lining.Marked inside:"MTX size 6 7/8 A↑F Made in Australia 36088 RAAF Bennetts"raaf, headwear, peak caps

This preserving jar was used in the first half of the 20th century to preserve cooked food - pickles. Preserving home produce in bottles is a method that applies heat to food in a closed glass home canning jar to stop the natural spoilage that would otherwise take place. It removes air from the jar to create a seal. he bottling process forms an air tight seal between the bottle and the lid. Residents of Orbost have long been self sufficient growing their own fruit and vegetables with earlier market gardeners They preserved their produce for use all year. Fowlers Vacola preserving kits were common in most kitchens.A brown glass Fowler's Vacola preserving jar filled with pickles. It is a No. 27 bottle with a size 3 metal clip. It has an 850ml capacity. The lid has metal tension clips which are secured during the canning process and are removed once a vacuum seal has formed. The lid is tin-plated with a lacquer coating, double-coated on the underside.On lid Fowlers Vacola Size 3 Top of jar- embossed with the words Fowlers Vacola food-preservation fowlers-vacola container-glass

Standard Issue Australian Army Winter JumperminorKhaki V-neck Woollen army jumper. Re-enforced elbows Size ??

Battle uniform jacket is for less formal circumstance. Belonging to "Peter Stoklahsa" enlisted 1966. Refer Cat 7674P.RAAF blue uniform jacket size 10 OR. Royal Australian Air Force shoulder patches.. Commonwealth emblem patch sewn onto lower arms. Two breast pockets with service ribbon attached above left pocket. Material epaulettes on each shoulder with a black button and gold RAAF Eagle and Crown Emblem. Zipped front with stretch bands on bottom sides. Inside cotton lining. Inside pocket - label of maker on inside.Label - "A.G.C.F. VIC. 1981. 8405.66.103.8063 Size 10 OR. Service No. Cleaning instructions. raaf, uniform, peter stoklahsa

Two CTC School blazers dating from 1970 onwards when Collingwood Technical School changed to Collingwood Technical College. Both have epaulettes on each shoulder with two gold stripes. The first also has two Band badges, one on each lapel, indicating it belonged to a School Band member. It is in very good condition. The second blazer has no badges, is made by 'waldron's SCHOOLWEAR' and has 'The Doctor FLANNEL ...' label and is a size 10.Black Pure Wool school blazer, with two gold stripes on epaulettes on each shoulder, and CTC logo on the pocket. A Band badge on each lapel. Dates from 1970 when Collingwood Technical School changed to Collingwood Technical College. Also a second CTC Black School blazer which was in the collection, also with the same epaulettes made by Waldron's Schoolwear, size 10.1st Blazer: CTC logo on pocket. And Manufacturer's labels inside. First reads 'PURE WOOL / Philip Joseph / TAILORED QUALITY'. Second label reads The FAMOUS / Doctor / FLANNEL / AUSTRALIAN WOOL BUREAU / GOLD MEDAL WINNER / ALL PURE WOOL / MOTHPROOFED' Second Blazer has label 'waldron's / SCHOOLWEAR' and 'The Doctor ...' label as the one above. This is a size 10.collingwood technical college, school blazer, uniforms, nmit.

Set of two Envelopes used by "Victoria Transport - Ministry of Transport". Has the logo and return address details printed on it in green ink. Would have been used for A3-size and folded A4 documents or publications. A stationery that is associated with a now-evolved ministerial department which existed in the 1990s. Set of two Brown paper envelopes - large and medium size - pre-printed for Victoria Transport - Ministry of Transport. with a flap that required to be moistened for sealing.public transport, letters, stationery, transport, ministry of transport

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. Lecturers and students at Ballarat College of Advanced Education.Four colour photographs - two sizesviosh, victorian institute of occupational safety and health, bcae, ballarat college of advanced education, jim thyer, steve cowley, dennis else

Khaki mesh and cloth pilot's vest five pockets on front fastened with domes - various sizes, Two pockets on front fastened with zips. Vest is fasted with zipper down front, three pockets astened with domes on side of back, one large pocket on back with velcro fastenerVest - Survival mesh net. Size medium - Rest of label too faint to read. "Barber" written in black textavest, clothing

This specimen was recovered from Sedgwick, VIC. Spotted slate is a fine-grained porphyroblastic metamorphic rock with a number of compounds including muscovite, quartz, graphite with cordierite poikiloblasts and more. The cordierite poikiloblasts are rounded crystals that size up to 2.5 mm. the growth of these crystals is in response to metamorphism of low to medium intensity. The town Sedgwick was named after British geologist Adam Sedgwick This specimen is part of a larger collection of geological and mineral specimens collected from around Australia (and some parts of the world) and donated to the Burke Museum between 1868-1880. A large percentage of these specimens were collected in Victoria as part of the Geological Survey of Victoria that begun in 1852 (in response to the Gold Rush) to study and map the geology of Victoria. Collecting geological specimens was an important part of mapping and understanding the scientific makeup of the earth. Many of these specimens were sent to research and collecting organisations across Australia, including the Burke Museum, to educate and encourage further study.A solid rectangular hand-sized spotted slate specimen in a shade of light grey with darker flecks throughout Spotted Slate / Locality: Sedgwick Victoria | This is an early specimen / from the Quarter sheet / map. See sample 62 / page 18. Described as 'Spotted Slate' but these / days we would call it spotted hornfels / C. William 15/4/21 slate, spotted slate, victoria, beechworth, burke museum, geological specimen, mineralogy, sedgwick, sedgwick victoria, spotted slate specimen

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. All we known about Richard Routledge is that he was a tool maker and retailer that operated a business at either 23 or 64 Bull St Birmingham between 1869 to sometime in the early 20th century. There are many of his tools including decorative moulding planes of all sizes and designs for sale around the world and that his tools in particular moulding planes are well sought after by collectors of vintage tools. A vintage tool made by a known maker, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use to produce a decorative moulding for a piece of furniture, door trims etc or other timber items that had to be accomplished by using hand tools and in particular one of these types of planes. Profiled planes came in various shapes and sizes to achieve the required decorative finish. A significant tool from the mid to late 19th century that today is sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Moulding plane size No 2Marked Routledge Birmingham. Stamped JAS Burden (Owner)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

CTC dates from 1970- when CTS changed its name.Sleeveless Football Jumper, Collingwood Technical College 1970-, with CTC logo on side, and number 3 in a square on the back. Label inside 'A / RIDER / PRODUCTION / 70% Acrylic / 30% Wool' with a size 36 smaller tagCTC logo on side, and number 3 in a square on the back. Label inside 'A / RIDER / PRODUCTION / 70% Acrylic / 30% Wool' with a size 36 smaller tagcollingwood technical college, football jumper, uniforms, teams, nmit.

The pessary was originally regarded as an instrument and made from cork, ivory, hard rubber or gum-elastic. In later times, they were made from black vulcanite, flexible tin, soft copper wire covered with Indian rubber, and celluloid. The form of the pessary was and still is variable -either round, oval, or moulded in some cases combining three or four curves depending on the size of the pessary. In ancient times, medicated pessaries were made from emollient. astringent and aperient. Several of these are still used, but in more modem times are called vaginal suppositories. Anal suppositories are still used to suppress the pain of haemorrhoids.Moulded black vulcanite pessary. Pessary is irregular in shape. Size small.pessary, intrauterine device

Shirt, khaki cotton polyester, short sleeve with shoulder epaulettes. Plastic buttons. Cotton manufacturer's label back, below collar with black print information. Size stamp on inside collar. handwritten owner's label - bottom back of shirt.Cotton label information - black ink print. "ADI P/I /1989/^/size 40/R405.66.093.8019/Service No./Name/ DO NOT BOIL OR WRING./ MACHINE WASHABLE/ DRIP DRY, IRON LIGHTLY/ WITH WARM IRON" Black ink stamp on collar "SIZE 40". Bottom back shirt - black ink handwritten "320 4573 GREEN".uniform, army, shirt

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. All we known about Richard Routledge is that he was a tool maker and retailer that operated a business at either 23 or 64 Bull St Birmingham between 1869 to sometime in the early 20th century. There are many of his tools including decorative moulding planes of all sizes and designs for sale around the world and that his tools in particular moulding planes are well sought after by collectors of vintage tools. A vintage tool used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture was done by hand using one of these types of plane. A significant item from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture was made predominately by hand and with tools that were themselves hand made shows the craftsmanship used to make such a unique item. Plane, Moulding, Hollow Size No 18 Routledge Maker (Owner "J.A.S.Burden")flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

The uniform belonged to Wing Commander "Leonard Bacon", born 11 June 1906. He enlisted in the RAAF on 31 May 1926 No. 03305 with the rank AC.1. In 9 postings in Vic, QLD and WA he rose through 11 ranks to Sgt Maj Class 2 by 1940. He was commissioned as Flying Officer on 1.8.1940. He rose through the ranks to be Wing Commander on 1.7.1951. During WW2 from 1941 he was explosives Inspecting Officer at Northern Area 5 then to Explosive Inspecting Officer for the whole RAAF in the S/W Pacific. This role took him to some 21 places in the North from Townsville - Darwin to across the islands many several times. Leonard was awarded a "Mention in Despatches" on Morotai in 1945. Post WW2 in 1950 Leonard was appointed Chief Inspector of explosives in the RAAF, one of these roles was the supervision of the disposal of large quantities of War Stock. On 13.6.1958 he was recommended for an “OBE” which he received in the 1959 New Years Honors List. Leonard retired from the RAAF on 11.6.1960 after 34 years. This is a very brief record of his service documents.Dark Blue Service Dress Uniform comprising of jacket (.1) Pants (.2) gold buttons with RAAF emblems. Ribbons on the coat are as follows; Left to Right: OBE, 1939-45 Star, Pacific Star, British War Medal with clasp "MID". Australian Service medal, Long Service and Good Conduct medal. Jacket has black inside lining with belt connected to back. Three stripes of Wing Commander rank on the sleeves. Size "M".raaf, uniform, leonard bacon

Peaked German hat worn by Army NCO's during WW2.Green felt peaked cap. Emblem of silver eagle carrying a Swaztika on front. White edging. Middle portion dark green felt, 6 cm wide with silver laurel leaf emblem surrounding a silver button with a red centre. Hard plastic peak. Black on both sides. Inside lining orange in colour with soft brown leather lining around middle. Chin strap broken - is leather with metal buckles.Size " 55" .german uniform, peaked hat, wehrmacht

Items issued to Wayne Forbes 3176337 1 Field Sqd RAE. Refer Cat No 754 for service history also 2586.Pair of canvas sand-shoes, white with black toe caps and sides, part of kit issued to recruits."size 8"uniforms - army, footwear, sandshoes

Navy skirt blac coloursize 76A

Standard issue item as used by Australian servicemen during the conflict in Vietnam (1962-1972).Black leather gaiters, fastened by 3 straps with metal buckles, black stitching.ULC/1907/size 31R ULC/1907/size 31L