Large kukri knife, thought to be issued to the Ghurka troops by the British Army. Comes with two smaller sharpening knives. All contained in a leather scabbard.

Kukri knife probably ceremonial chrome blade with etchings with two small sharpening knives lion head on pummelINIDA etchings on blade

An item from an outstanding and diverse collection of photographs, artefacts and publications, assembled by members of the Christian and Washfold families of Kew.Small brown cardboard box containing folding metal scissors, metal and bone pen knife and cylindrical metal container. Minor corrosion on knife and cylinder.functional accessories, scissors, christian-washfold collection

Khukuri is Nepalese knife - Also known as Kukri - Ghurka blade or Ghurka knife similar to machete. The smaller blade is used for sharpening and maintaining the kukri -

Used by RAAF personell in accommodation quarters 1942 -1946. WWII wartime objects – living in the RAAF camp . They provide evidence of the contents of the RAAF barracks and recreation hut erected in 1942 and occupied until 1945. Some of the items such as cutlery, a wood heater/stove, domestic radio (remnants) were used in daily life by servicemen. Spoons x 3 (WPLS 0101.3; likely provenance); spoon and knife (0148.2 likely provenance)The two metal small spoons, two large spoons and knife without its handle are known to have been used by WWII RAAF or navy personnel in their accommodation quarters 1942-1945. The items, if original to the site, have second level contributory significance for the evidence they provide of the WWII buildings and their use between 1942 and 1945. Metal spoon and a serrated edged knife without a handle. Both items have some corrosion.

Wandin Thomas Sebire JP (1867-1960) learnt boot-making as a young man. In a small workshop on his property in Sebire Avenue, Wandin he made boots for family, friends & neighbours. He also repaired boots & made other small leather articles. Bootmaking is a complex process requiring a variety of tools. The leather is cut to shape, glazed & burnished (polished) with heated irons. The pieces are stretched onto, & nailed to, a wooden last to form the boot. Once attached to the insole, the boot is finished on a metal last. Uppers are stitched with waxed thread through holes made with an awl. Heels comprise pieces nailed together & neatened with a heel shave. Metal plates, short nails or hob nails driven into the sole & heel, often in a pattern, improved durability.Cast iron handmade knife with a wooden handle, attached by a nail.bootmaking tools, cutting tools

Cast iron and wood static knife cleaner. Folding wooden lid with small knob screws, holding the cleaner together.

Page turners were used in churches and synagogues to read Holy books, to turn pages in huge manuscripts and books (and later newspapers) as well as open double pages without a sharp knife (letter openers). This was from the home of W.J. Sebire in Wandin.A highly polished cream coloured long vintage celluloid page turner used for reading. It has a curved round ended long smooth blade which is paler than the darker short round pointed handle. Both sections have small dark brown fine floral designs on one side. There is a 3mm crack all round near where the handle meets the blade. On one side only are small dark brown floral patterns on the handle and one on the blade.page turners, holy books, celluloid

A meat grinder or mincer was used for mincing or fine chopping of raw or cooked meat, fish, vegetables or similar food. It replaced tools like a mincing knife.A small vintage cast iron mincer with a wooden handle attached to the long cast iron handle. It can be screwed to a table or bench, secured tightly by a two pronged claws. It has a white enamel coated funnel at the top for the meat to be pushed into the mechanism which when the handle is turned operates the inner mechanism which forces the minced meat out through a side opening. The cast iron handle is curved.'Loveload London 1'domestic objects, kitchen equipment, cooking equipment, meat grinders, meat mincers

Manufactured by Holden and Frost for military useManufactured by Holden and Frost Ca 1907Small leather pouch belt mounted all leather brass stud on front for fastening fold over coverHolden and Frost Adelaide CMF - NSW 07military, leather, knife pouch

Small black tin made by Nobel. Holds 100 detonators. Painted black with white printing.On front side of tin "6 6" On rear side of tin "6 6" On lid of tin "NOBEL No.6 100 detonators for high explosives Alfred Nobel (Picture of thistle flower) THISTLE BRAND Manufactured in Australia GLASGOW" On left hand side and right hand side of tin "Must be handled with great care and kept dry. The composition must not be scratched or pricked with a pin, nail, knife or other hard substance. as any act of this kind may cause explosion."

Small, orange and white tin box with hinged lid for one hundred detonators.On lid: "Nobel No. 6. 100 detonators for rich explosives. Alfred Nobel. Thistle Brand. Manufactured in Gt. Britain. Glasgow" "6 6" on front and back panels, "For use wherever safety fuse is allowed" on left side panel and "Must be handled with great care and kept dry. The composition must not be scratched or pricked with a pin, nail, knife blade or other hard substance, as any act of this kind may cause explosion" on the right side panel.explosives equipment

Small combination glove button hook, pocket knife and corkscrew with embossing.Embossed.buttonhooks, pocket-knives, corkscrews

In the early 1900's, E.B. Jones developed a small glass churn for home use. Nathan Dazey purchased Jones' business and relocated it to St. Louis, Missouri as the Dazey Churn and Manufacturing Co. Dazey churns were manufactured up until 1945. Although best known for its butter churns, the company also made can openers, knife sharpeners and other kitchen products. Thes churns were widely used throughout households in rural Australia during the first half of the 20th century.This item was typical of kitchenware used widely in the early twentieth century when households produced more basic food items. A round glass churn with metal lid and mechanism. The handle was turned to rotate the paddle at the base of the mechanism in the jar. The jar holds 2 quarts of milk.The embossed Jar lettering is as follows: DAZEY CHURN No. 20 Patented February 12,1922 DAZEY CHURN & MFG. CO. ST. LOUIS, MO. MADE IN U.S.A.domestic appliances, kitchen appliances

Black and white photograph of wooden building with people standing outside, boy on a horse and horse and cart. A sheep carcass hangs in the doorway of the shop. Man holding either a large knife or steel standing behind a small child. The image has been adhered to a piece of cream coloured backing board. butchers, horse drawn vehicles

BHS CollectionWaist length dark green cotton bodice. Fabric has alternating stripes of pulled thread pattern and wider stripes of small dot pattern. Front opening with deep V to waist with lined lace insert extending from throat to waist. LHS of bodice fastened to lace insert with five press studs. Stand up collar of lined black lace (%cm) fastened with two hook and eyes. The bodice is made from five pieces. The two front sections have three knife pleats facing out and falling from the shoulder. The pleats are stitched down for twenty cms from the shoulders. On either side of the front opening is decorative embroidered black lace that extends across the shoulders to the back of the collar. There are two side panels from under the arm. The back section has three box pleats falling from the collars and tapering to the waist. The hem of the bodice is fastened with black cotton tape. Leg of mutton sleeves are trimmed with black embroidered brais at elbow and wrist. Lower sleeves have pintucks from elbow to wrist. The sleeves are lined with black cotton fabric. The back of the bodice is lined with black cotton fabric almost to the hem. A three cm piece of white and blue cotton tape is attached across the lower back with cotton ties at either end. The underarm panels are lined with brown cotton fabric and green satin inserted sections. The front has a separate lining with front opening and shaped with darts. Fastened with six buttons and buttonholes. Two shoulder pads on each side- one white piece under the shoulder and a green satin piece under the gathered section of each sleeve. Dark green full length skirt. Cotton fabric with alternating stripes of pulled thread pattern and wider stripe of small dot pattern. Skirt is made of three sections. Centre front panel widens slightly to hemline. Side panels continue around to join at centre back. Darts at both hips to shape sides. Panels widen to hemline. Inverted pleats at either side of back opening create fullness. Back opening(30cm) has insert of black satin joined to LHS of opening to enlarge the opening. Insert attached to waist band with two press studs. Two other press studs attach skirt to RHS of insert. Brown cotton waistband hand stitched to skirt. Ties attached to waistband at back opening- one cotton tape, one satin ribbon. Front centre panel has a piece of black satin stitched as lining from eighteen cm below waist (57cm deep). Stitched across and attached to side seams. Lower edge trimmed with black lace. Second piece of satin lining stitched to centre seam and stitched around the hip to partway across back.(Looks like a nylon petticoat cut in two pieces and stitched inside skirt as a lining). Hemline has fifteen cm piece of cotton lining attached and lower edge of hem has fringed cotton binding attached.. Side seams of front panel have decorative trim of embroidered braid extending seventy-six cms from waist. Braid then turned ninety degrees and continued in a horizontal zig zag line around to centre back seam (both sides) twenty cms above hem. Hand and machine stitched.costume, female, ladies dress- bodice.

These leatherworking tools were widely used in the 19th and early 20th centuries by saddlers, cobblers, and leather artisans for making shoes, saddles, belts, and harnesses. The round knife (half-moon knife) was an essential tool for cutting and skiving leather. The hole marker or stitch marker ensured even stitching, improving durability and aesthetics. The clamp tool may have been used for holding pieces of leather together during stitching or gluing. Such tools were indispensable in handcrafted leather goods before industrialized mass production. From HODGES Saddlery at NatimukThe image features three distinct vintage leatherworking tools, each tagged with numbers for identification. Left Tool: Leatherworking or Saddler’s Clamp A small metal clamp with an adjustable screw mechanism, likely used in leather stitching or riveting. The rusted metal body suggests it was used extensively in leather crafting, possibly to hold pieces of leather together while being stitched or to secure a cutting guide. The adjustable components indicate it was a versatile tool. Middle Tool: Leather Round Knife (Half-Moon Knife) A wooden-handled cutting tool with a curved, semi-circular blade, commonly known as a round knife or half-moon knife. This tool is traditionally used by leatherworkers for cutting, skiving, and shaping leather. The blade is rusted, but the tool still retains its distinct shape. The wooden handle is rounded for a firm grip, essential for precise cutting. Right Tool: Leather Hole or Stitch Marker A small metal tool with multiple protruding points, likely used for marking stitch holes or perforating leather before sewing. The sharp points indicate it could have been used to create evenly spaced stitch lines or decorative impressions. This type of tool was commonly used by cobblers, saddlers, and leatherworkers to ensure even and consistent stitching.leather, cutting tools, commercial equipment, saddlery

Ink wells like this were commonly used from the 19th to early 20th century, before fountain pens and ballpoint pens became mainstream. They were placed on desks for convenient access to ink, often paired with dip pens or quills. The letter opener was used to carefully slice open envelopes without tearing the paper, an essential tool for offices and formal correspondence. This set appears to be handcrafted, possibly a souvenir or decorative desk piece, incorporating natural wood for an artistic touch.This is a wooden ink well and letter opener set, commonly used for writing and correspondence. The ink well base is crafted from a natural wood slab, maintaining its organic shape with visible grain and bark edges. A small circular ink well container is embedded into the wood, with a hinged wooden lid that can be lifted to access the ink reservoir. The ink well also features a metal pen holder rail, designed to hold a fountain pen or dip pen when not in use. There is a small metal fitting embedded into the wood, possibly for securing accessories or refilling ink. The letter opener is made of wood and a polished horn or resin blade, with a curved, elegant design for slicing open envelopes. Wooden Ink Well and Pen Holder engraved "Commonwealth Trades Writing Championship Vic 1948 Head Teacher J.C. CAMERSON Esq."Wooden Ink Well and Pen Holder engraved "Commonwealth Trades Writing Championship Vic 1948 Head Teacher J.C. CAMERSON Esq."ink well, letter opener, pen holder, stationary, office, school item, j c cameron, head teacher, writing, competition, championship

The M.V. Manunda is a ship owned by the Adelaide Steamship Company, that became a registered hospital ship in 1940, during World War 2. The Manunda serviced injured personnel in the Pacific and Middle East. This letter knife is highly significant to the Returned Nurses collection. Though there is a few recorded pieces of memorabilia from the M.V. Manunda, they are few and far between. This item could potentially draw attraction and attention to this collection. Silver, chrome-plated letter knife, with decorative kookaburra hilt handle. Due to age [and perhaps storage] the letter knife has turquoise and brown erosion, corrosion and rust spots, primarily upon the blade faces. One blade face includes a small, raised enamelled flag, with gilding around the flag boarder. The flag itself is white, with a blue cross and an eight-pointed red star in the centre, it is the logo of the Adelaide Steamship Company. On the same blade face as the flag, is the name of the vessel, 'M.V. Manunda'. On the opposing blade face is 'EP A1 NS', silver quality marking, and the maker's mark, 'Angus & Coote Lt.' Due to the metallic property of the letter knife, it often feels cool to the touch. Though this is true for the kookaburra hilt too, the kookaburra hilt has more texture and feels rough to the touch. 'EP A1 NS' (Silver quality marking) / 'Angus & Coote Lt.' (Markers mark) / 'M.V.MANUNDA' (Naval vessel identifier.) papua new guinea, middle east, pacific, aans, japan, world war ii, world war 2, world war two