The Northern District School of Nursing opened in 1950 in to address the issues around nurse recruitment, training and education that had previously been hospital based. The residential school was to provide theoretical and in-house education and practical training over three years. The students would also receive practical hands-on training in the wards of associated hospitals. The Northern District School of Nursing operated from Lister House, Rowan Street, Bendigo. It was the first independent school of nursing in Victoria and continued until it closed in 1989.NDSN School 97 PTS 2.2 97 1981 Nurse checking a thermometer Debra Hyatt (Echuca student).8593.12 NDSN PTS 97 2.2 1981 Debra Hyatt (Echuca Student)ndsn, nursing

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. Box of accessories for the carbon monoxide monitor manufactured by Dragerwerk Lubeck Germany. Instructions enclosed are in English German and French Clear perspex container - divided into three sections. Thermometers, plastic bag, rubber tubes. Instruction sheet in German, English and Frenchviosh, victorian institute of occupational safety and health, carbon monoxide monitor, dragerwerk lubeck

This vaporiser is enclosed in a portable black cylindrical bakelite carry case with moulded handle, woven fabric strap and single steel latch. The item comprises a three-chambered vaporiser, an assortment of attachments including black ribbed rubber tubing, light brown rubber rebreather bag, facemask, black rubber mask harness, Connell pharyngeal airway with connector, an attachment for an endotracheal or nasal tube, as well as spare thermometer and other parts.Stencilled in white paint on the outside top lid is 'THIS SIDE UP / WITH CARE / SEE INSTRUCTIONS / INSIDE LID'. Serial number is inscribed on metal plate inside the lid and printed in white on the inside lid is 'IMPORTANT / The Oxford Vaporiser is a scientific apparatus'vaporiser, oxford, anaesthetic, portable, bakelite, connell pharyngeal airway, heated vapor, endotracheal, nasal, rebreather bag, thermometer, facemask

Mercury Thermometer (previously #95 from Mechanics Institute Eaglehawk). Mercury Fahrenheit Thermometer. Copper surrounds 'Made in England for DOBBIE Bros.' Melbourne. Approx 42cm long. Small Container surrounding mercury bulb at base. 'Freeze' written on the scale at 32 degrees. Maximum temperature 135 degrees. Minimum temp. 5 degreescottage, miners

Wooden rectangular base painted black with two display pieces. One a black oval frame with a three dimensional bird scene with tree's and other foliage. The other a red piece of rectangular paper with gold Korean or Japanese writing surrounded by a gold bird and dragon design. The paper is held between two sheets of plastic which is held up by a small wooden mount that has a thermometer, reading in both Celsius and Fahrenheit. There is also a small label with "ASTRONOMY" written on it and with Korean or Japanese pictograms writing underneath. There is also two mystery screw bolts just above the label. small label with "ASTRONOMY" written on it and with Korean? writing underneathkorean, bird scene, thermometer, gift, seamen, sailors, seafarers, lacker, peacock

In metal case & box.thermometer, oral

This temperature gauge would have been used in the past to take the temperature of water in a pot or bath. Water temperature gauges are still in use today. Although this item has no known local provenance it is retained as an example of a household item of the past – a water temperature gauge. This is a glass temperature gauge set into a metal holder with markings on each side of the thermometer. The holder has a metal clip at the top for hanging the object on a wall or cupboard. The holder is much rusted.‘Cold, Cool, Temp, Tepid, Warm, Hot’ ‘351’ bath thermometers, warrnambool, history of warrnambool

Bushfire behaviour is influenced by many factors including temperature, relative humidity (RH), forest type, fuel quantity and fuel dryness, topography and even slope. Wind has a dominant effect on the Rate of Spread (ROS), as well as fire size, shape and direction. Temperature and relative humidity have major impacts on fuel dryness and therefore upon the availability of fuel for combustion. The amount of fine fuel available can increase rapidly from nearly zero when fuel moisture content is more than 16% after rain or a heavy morning dew, to many tonnes per hectare as fuel dries out later in the day and the moisture content drops below 9%. This explosive escalation in the amount of available fuel can happen over a few hours on hot and windy days. A sling psychrometer is a simple device for determining air temperature and relative humidity. It contains two thermometers, one of which is covered with a wick saturated with ambient temperature liquid water. These two thermometers are called dry bulb and wet bulb. When the sling psychrometer is spun rapidly in the air, the evaporation of the water from the wick causes the wet bulb thermometer to read lower than the dry bulb thermometer. After the psychrometer has been spun long enough for the thermometers to reach equilibrium temperatures, the unit is stopped, and the two thermometers are quickly read. A psychrometric scale on the side of the instrument is then used to convert the dry bulb temperature TDB and the wet bulb temperature TWB into humidity information. The wet bulb temperature is approximately equal to the adiabatic saturation temperature. The thermometers fold back into the plastic handle when not in use. Used to measure temperature and relative humiditySling PsychrometerBACHARACH INSTRUMENTS - Pittsburg PAbushfire, forests commission victoria (fcv)

The barometer was either made or sold by T. Gaunt & Co. of Melbourne, a manufacturer, importer and retailer of a wide variety of goods including jewellery, clocks and watches, navigational and measuring instruments, dinnerware, glassware and ornaments. Thomas Gaunt photograph was included in an album of security identity portraits of members of the Victorian Court, Centennial International Exhibition, Melbourne, 1888. (See below for further details.) Admiral Fitzroy Pattern Barometer History: The stick mercury barometer was named after Admiral Robert Fitzroy of the Royal Navy (1805-1865) for his detailed instructions on how to interpret the weather, which were included with the instrument. Fitzroy was the captain of the HMS Beagle, also a weather forecaster to Charles Darwin and the second Governor of New Zealand. He developed many different types of barometers and was the first person to introduce the science of weather forecasting to the British Isles. A local manufacturer of scientific instruments, Thomas Gaunt, produced the barometer that was adapted for the southern hemisphere by Robert Ellery, the State Astronomer based at the Melbourne Observatory. In the original sale catalogue for Gaunt's, the item is described as "Gaunt's Fitzroy Barometers" and it was priced from 25/- to ₤9.9s. History of Thomas Gaunt: Thomas Gaunt established Melbourne's leading watchmaking, optical and jewellery business during the second half of the 19th century. Gaunt arrived in Melbourne in 1852, and by 1858 had established his own business at 14 Little Bourke Street. Around 1869 he moved to new premises in Bourke Street on the corner of Royal Arcade. Gaunt's shop quickly became a Melbourne institution. Gaunt proudly advertised that he was 'The only watch manufacturer in the Australian colonies'. While many watches and clocks may have had Gaunt's name on the dial, few would have been made locally. Gaunt did make some watches for exhibitions, and perhaps a few expensive watches for wealthy individuals. Gaunt's received a telegraph signal from Melbourne Observatory each day to correct his main clock and used this signal to rate and repair ship's chronometers and good quality watches. His main horological manufacturing was directed at turret clocks for town halls, churches and post offices. These tended to be specific commissions requiring individualised design and construction. He made the clock for the Melbourne Post Office lobby, to a design by Government Astronomer Robert Ellery, and won an award at the 1880-81 Melbourne International Exhibition for his turret clock for the Emerald Hill Town Hall. He became well known for his installation of a chronograph at Flemington Racecourse in 1876, which showed the time for the race, accurate to a quarter of a second. The firm also installed the clockwork and figures for Gog and Magog in the Royal Arcade. Thomas Gaunt also developed a department that focused on scientific instrumentation, making thermometers and barometers (from imported glass tubes), telescopes, surveying instruments and microscopes. Another department specialised in electroplating for trophies, awards and silverware, and the firm manufactured large amounts of ecclesiastical gold ware and silverware, for the church including St Patrick's Cathedral. There are no records that disclose the number of employees in the firm, but it was large enough for Gaunt to hold an annual picnic for the watchmakers and apprentices at Mordialloc from 1876; two years previously they had successfully lobbied Gaunt to win the eight hour day. Gaunt's workforce was reportedly very stable, with many workers remaining in the business for 15 to 30 years. Gaunt's wife Jane died on September 1894, aged 64. They had one son and six daughters, but only three daughters survived to adulthood. Two became nuns at the Abbotsford Convent and one daughter, Cecelia Mary Gaunt (died 28 July 1941), married William Stanislaus Spillane on 22 September 1886 and had a large family. Gaunt died at his home in Coburg, Victoria, leaving an estate valued at ₤41,453. The business continued as T. Gaunt & Co. after his death. The barometer is historically significant as an example of the work of Melbourne’s leading scientific instrument maker, Thomas Gaunt. The barometer has social significance as an example of the type of scientific equipment that Thomas Gaunt expanded his horology business into producing. Further social significance lies in the fact that Robert Ellery, the Government Astronomer who designed the local version of the barometer, had a direct connection with the Melbourne Athenaeum founded in 1839 as the Melbourne Mechanics' Institution. Its purpose was "the diffusion of literary, scientific and other useful information". There are also records of a T Gaunt as a subscription and committee member of this the Athenaeum organisation during the 1870s and 1880s which may be Thomas Gaunt, unfortunately still unverified.Stick mercury barometer known as the Admiral Fitzroy Barometer. It comprises an oblong wooden case with glass front panel, ornate pediment, barometer with bulb cistern (empty of fluid), cleaning brush with printed instructions for interpreting information given by the gauge affixed to left and right face of instrument. Includes a thermometer. The barometer appears to be intact. Adapted to the Southern Hemisphere. Special remarks by Admiral Fitzroy. Made by Thomas Gaunt, Melbourne. Manufacturer's details are on back of wooden casing. Rear has upper and lower brass screw plates for securing to vertical surface."Manufactured by Thomas Gaunt, 14 Little Bourke Street, Melbourne. "flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, barometer, admiral fitzroy, thomas gaunt, thomas gaunt of melbourne, clockmaker, admiral fitzroy barometer, barometer instructions, gaunt’s fitzroy barometer, gaunt’s of melbourne, gog and magog designer, horological manufacturer, meteorological instrument, melbourne athenaeum, melbourne mechanics' institution, melbourne observatory time signal, robert ellery government astronomer, scientific instrument, stick mercury barometer, thermometer, weather forecast, t gaunt & co

Wooden frame with glass insert.Dr Forbes specifications.bath, thermometer, forbes

Stevenson screens were first introduced in Australia in the 1880s and were widely installed by 1910. The screens have been used to shelter and protect thermometers and other meteorological instruments from rain and direct heat while the holes and double-louvre walls allowed air to flow around them. Sometimes other meteorological instruments were included in the weather stations, so there were different Stevenson Screen sizes. This authentic, original Stevenson screen was previously owned by the Australian Bureau of Meteorology and was used for many years for weather readings at the Cape Otway Light Station in southwest Victoria. The Lighthouse Keepers recorded the readings for minimum and maximum temperatures at 9 a.m. every day from January 1865 until April 1994. The equipment was sheltered in a Stevenson Screen from 1902 until April 15 1994, when the mercury thermometer was replaced by a platinum resistance probe within an Automatic Weather Station (AWS). This Stevenson screen is one of the two screens that then became redundant. The other Stevenson screen was kept to display to visitors. Lightkeepers were no longer required at the Cape Otway Light station either, due to the automated system. The meteorological instruments donated with the screen were used for measuring temperature and humidity. They are mounted on a metal bracket that fits across the screw holes on the screen’s internal frame. The glass-covered Relative Humidity (RH) sensor was made by the renowned precision instrument maker, Rotronic AG of Switzerland, which was founded in 1965. The firm made its first electronic temperature and humidity instrument in 1967. Meteorological records have been collected in Australia from the 1800s. The records were collated, published and used as a basis for weather forecasts. Many sectors, such as maritime and agriculture industries, have relied on these figures for making important decisions. The quality and placement of the meteorological instruments used to measure temperature and humidity are of utmost importance for accuracy. In early colonial times, there were no national standards for meteorological instruments that would allow for accurate figures and comparisons. Once the Bureau of Meteorology was established (around 1908 to 1910) the department installed Stevenson screens throughout Australia, many at lighthouses and light stations, and the measuring instruments were standardised. The Stevenson Screen was named after its inventor, Scottish Civil Engineer Thomas Stevenson (1818-1887) who was also the father of Robert Louis Stevenson, author. Stevenson developed the small thermometer screen around 1867. It had double-louvred walls around the sides and a top of two asbestos sheets with an air space between them and was thickly painted with a white coating that reflected the sun’s rays. This design was modified in 1884 by Edward Mawley of the Royal Meteorological Society. Standards were set for the locations of the screens and instruments, including their distance above ground level and the direction the door faced.Stevenson screens played a significant part in providing a standardised shelter for all meteorological instruments used by the Australian Bureau of Meteorology from about 1910 until 1994. The readings from the instruments gave the meteorological statistics on which weather forecasts throughout Australia were based. This Stevenson screen was used locally at Cape Otway, along the Great Ocean Road in southwest Victoria, so contributed towards our local forecasts and weather warnings.Stevenson screen, original, from the Australian Bureau of Meteorology’s weather station at the Cape Otway Lighthouse. The screen is a white wooden cupboard with a slanted cover raised above the top. The top has ten drilled ventilation holes, and the sides and door are made of downward-slanting double louvres. Two brass hinges join the door to the lower edge of the screen and a metal fitting at the top edge allows for a padlock closure. The screen is supported on four short legs, each with a hole drilled from side to side for fitting to a frame. Inside the screen are two wooden frames fitted with hooks and screws. The floor has three boards; one across the back and one across the front at the same level, and a board wider than the space between these boards is fitted higher, overlapping them slightly. Inside the screen, a pair of electronic instruments with short electric cables is mounted on a metal bracket with drilled holes in it. One of the instruments is a Relative Humidity (RH) probe. It is 26 cm long and is a glass tube with a filter on one end and an electrical connection on the other. It has inscriptions on its label, showing that was made by Rotronic AG, Switzerland. The other instrument is a Resistance Temperature Device (RTD) thermometer. It is 22.5 cm long and has a narrow metal probe joined to a hexagonal metal fitting. A brass plate on the front of the screen has impressed inscriptions. The screen is Serial Number 01/C0032, Catalogue Number 235862.Stamped into brass plate "CAT. NO. / 253862 / SERIAL NO. 01/C0032" On instrument’s electrical fitting; “CD2” [within oval ‘+’ above S] “Serie693 op65 / 220/380V~16A” On instrument’s glass; “rotronic ag” “SWISS MADE” “CE / CH-8303 / Bassersdorf” Symbol for [BARCODE] “ART NO MP 101A_T4-W4W” “POWER 4.8.30VDC“ “OP. RANGE: 0-100%RH/-40+60° C” “OUT H 0-100% 0-1V” “OUT T -40+60°C -0.4..+0.6V” “SERIE NO 19522 009”flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, cotton region shelter, instrument shelter, thermometer shelter, thermoscreen, thermometer screen, measuring instruments, meteorological instrument, weather recording, weather station, lighthouse equipment, light station equipment, stevenson screen, marine instruments, mercury thermometer, platinum resistance probe, aws, automatic weather station, rotronic ag, swiss made, meteorological device, weather forecast, weather prediction, weather records, meteorological forecast, meteorological record, australian bureau of meteorology, bureau of meteorology, bureau, bom, relative humidity, rh, relative humidity probe, resistance temperature device, rtd, thermometer, temperature, humidity, cape otway, cape otway lighthouse, cape otway light station, rotronic, switzerland, swiss instrument, thomas stevenson, double-louvered walls, edward mawley, royal meteorological society, 01/c0032, serial number, cat. no. 235862, serial no. 01/c00323

Donated August 25, 1956 by Edward Lumley and Sons (Vic) Pty Ltd, for Annual Competition between all yachts on the Club register. It was first raced January 16 1957, and won by Graham Drane skippering Commodore Otto Meik’s, Paula. Trophy when later provided for by New Zealand Insurance Company donation, was reallocated for a combined divisions result using V.Y.C. handicaps over three races:- ‘W.T. Crosbie Memorial’, ‘Cactus Cup’ and ‘Service Shield’.A Trophy which includes a Chronometer, Barometer and Thermometer mounted in a 155mm diameter Brass Semi Spherical gimbled setting and mounted on 110mm high, six sided tapered brown base with oblong winners inscription plaques attached to faces.PRESENTED TO ROYAL ST KILDA YACHT CLUB FOR ANNUAL COMPETITION 1956edward lumley, trophy, perpetual

Kodak home developing and printing kit with booklet; black and yellow plastic carry case; 2 x developers; printing masks; photo-flo (liquid); Acid fixing powder; wood and glass frame; glass measuring cup; photographic thermometer; 'dark' light in a metal case."Kodak (Australasia) Pty Ltd Melbourne, Australia"photographic processing equipment, photographic chemicals, darkroom lamps

Probably used in the Ballarat School of Mines Chemisry Laboratories, at that time led by Professor Alfred Mica Smith, with lecturer Daniel Walker. From W. Watson & Sons, Block Arcade, MelbourneAn early model of a flashpoint apparatus, of mainly brass construction, heated by a spirit lamp. Complete with two mercury-in-glass tfermometers (50 degree to 70 degrees celcius x 1 degree, 10 degrees to 50 degrees celcius c 1 degree), and lamp-stand. Serial Number 1786.scientific instruments, chemistry, alfred mica smith, daniel walker, ballarat school of mines, w. watson & sons ltd, thermometer

Stick mercury barometer, named after Admiral Robert Fitzroy of the Royal Navy (1805 - 1865) for his detailed instructions on interpreting the weather that are included with the instrument. Fitzroy was the captain of the Beagle, a weather forecaster to Charles Darwin and the second Governor of New Zealand. He developed many different types of barometers and was the first person to introduce the science of weather forecasting to the British Isles. A local manufacturer of scientific instruments, Thomas Gaunt, produced the barometer and it was adapted for the southern hemisphere by Robert Ellery, the State Astronomer based at the Melbourne Observatory. Described as "Gaunt's Fitzroy Barometers" in the original sale catalogue, it was priced from 25/- to ₤9.9s. [See Miller, M., Gaunt’s Time, 2014]. Thomas Gaunt's business was originally located at 14 Bourke Street East from 1858. In 1869-1870 he moved to new premises in the Royal Arcade, Collins Street. Gaunt's business became an institution in Victorian Melbourne and Gaunt its leading clock maker. PROVENANCE According to official minutes the barometer was purchased by the Melbourne Athenaeum in 1874. In particular, at the March meeting of the General Committee the House Subcommittee was instructed to "obtain a Fitzroy or other reliable barometer" to be "fixed in the Reading Room". The 1874 Annual Report records the purchase at ₤3.10.0. The barometer is historically significant as an example of the work of Melbourne’s leading scientific instrument maker, Thomas Gaunt. The barometer has social significance as an example of the type of accoutrements provided by the committee of the Melbourne Athenaeum for the comfort of its members. Further social significance lies in the fact that Robert Ellery, the Government Astronomer, who designed the local version of the barometer, has a direct connection with the Athenaeum being a subscription member and committee member of the Athenaeum during the 1870s. There are also records of a T Gaunt as a subscription member of the Athenaeum during the 1870s and 1880s which may be Thomas Gaunt, however, this is yet to be verified. Stick mercury barometer known as the Admiral Fitzroy Barometer. It comprises an oblong wooden case with glass front panel, ornate pediment, barometer with bulb cistern (empty of fluid),printed instructions for interpreting information given by the gauge affixed to left and right face of instrument. Includes a thermometer. The barometer appears to be intact except for the turning knobs which are missing and the mercury in the tube which is not present. Whether the instrument could be restored to working order is unknown. Front right panel, metal plaque: "Thos Gaunt, Barometer Maker, Royal Arcade, Melbourne"melbourne athenaeum, barometer, thermometer, admiral fitzroy, thomas gaunt of melbourne, robert ellery

Sister Beryl Hawker is a District Nurse working for the Melbourne District Nursing Service (MDNS) and is leaving their Headquarters at 452 St. Kilda Road, Melbourne to give nursing care to a patient in their home situated in a Melbourne suburb. She is wearing the MDNS winter uniform grey wool coat over her grey cotton dress with white collar. A red Maltese cross is attached to the centre of her grey wool beret. Her nursing case contains an apron, hand towel, thermometer, instruments, dressings and lotions.The Trained nurses of the Melbourne District Nursing Society (MDNS), later known as Royal District Nursing Service (RDNS), visited patients in their home and gave best practice care in many fields of nursing and to people of many cultures throughout its 130 years of expansion. Initial visits not only assessed the specific nursing situation but the situation as a whole. Their patients ranged in age from babes, children, adults to the elderly and referrals were taken from Hospitals, General Practitioners and allied Health facilities. Some of the care provided was: – Post-Natal care given to mother and babe, Wound Care following various types of surgery, accidents, burns, cancer, leg ulcers etc. Supervising and teaching Diabetic Care, including teaching and supervising people with Diabetes to administer their own Insulin, and administering Insulin to those unable to give their own injections. Administering other injections and setting up weekly medication boxes. The Sisters performed Catheterizations on adults suffering from conditions such as Quadriplegia, Paraplegia, Multiple Sclerosis (MS), Motor Neurone Disease (MND) and Guillan-Barre Syndrome, and when required at school on children for e.g. those with Spina Bifida. The Sisters visited those requiring Cystic Fibrosis support and care; those requiring Haemo-Oncology care, including visiting children at school; those requiring Home Enteral Feeding care, and those requiring IV therapy at home and home Dialysis. Palliative Care was given including pain relief with the use of syringe drivers, personal care as needed, and advice and support to both patient and family. RDNS provided Stoma management to those needing Urostomy, Ileostomy and Colostomy care and those requiring Continence care. HIV/AIDS nursing care was provided; visits to Homeless Persons were made. Personal care was given to patients ranging in age and with varying mobility problems, such as those with MS, MND, Guillan-Barre Syndrome, Quadriplegia, Paraplegia, Acquired Brain Injury, following a Cerebrovascular Accident (Stroke), those with severe Arthritis and those with a form of Dementia. When necessary the elderly were assisted with personal care and advice given on safety factors with the use of hand rails, bath or shower seats, and hand showers. Rehabilitation with an aim towards independence remained at the forefront of the Sister’s minds and when possible using aids and instruction on safe techniques enabled the person to become fully independent. All care included giving advice and support to the patient and their Carers. The Sisters liaised with the persons Doctor, Hospital and allied Health personal when necessary.Sister Beryl Hawker, who has short dark hair, is smiling as she is leaving Melbourne District Nursing Service (MDNS) Headquarters. She is wearing the MDNS uniform of an ankle length double breasted grey wool coat and wool beret with a central Maltese cross. Part of the MDNS insignia is seen at the top of her left sleeve. In her right hand she is carrying a rectangular nursing case and a light colour soft material bag. She is standing in front of the open metal spike gate between the two square grey concrete pillars of the gateway; the black numbers '452' are written on a white background on the top section of each pillar. A spiked metal fence is attached and running to the right of the right pillar; attached to this and close to the pillar, is a white plaque with black capital letters reading: 'Melbourne District Nursing Service Headquarters'. In the background is a paved path leading to part of a building with part of three arches seen and above this some concrete balustrade. A large pedestal concrete flower urn sits next to the partially seen steps leading up to the building. Some low bushes are seen behind the fence and in front of the building.59134-11melbourne district nursing service, mdns, mdns uniform, mdns headquarters, sister beryl hawker, royal district nursing service, rdns

This ashtray was given as a keepsake to customers of Gehrig Dairy in Wodonga. The dairy was located on the corner of Hovell Street and Wodonga Street in the late 1960s. It was owned and operated by Graham Charles Gehrig. It was customary for the dairy to give a Christmas gift each year. Other items included a thermometer and can or bottle openers. Mr. Gehrig passed away in 2019 and is buried in Wodonga. He served over 30 years as a member of the Wodonga Cemetery Trust, many of those as Chairman. He also lived for many years in Melbourne and was a member of the Lions Club of Beaumaris.This item is representative of a local business enterprise in Wodonga in the late 1960sA medium sized melamine ashtray inscribed with the name of business in gold letteringOn top section: "XMAS 1969 /GEHRIGS DAIRY/ PH. 24 2532" Underneath: "REG. DESIGN / A BLUE POINT PRODUCT/ TYPE. MO."gehrig dairy, businesses wodonga, dairy industry wodonga

This is style of nursing case and type of equipment used by the Sisters of the Royal District Nursing Service (RDNS) in the 1970s. The Sisters worked throughout the Melbourne inner and outer suburbs visiting patients to administer nursing care in their homes and other arranged venues. The Trained nurses of the Melbourne District Nursing Society (MDNS), later known as Royal District Nursing Service (RDNS), visited patients in their home and gave best practice care in many fields of nursing, and to people of many cultures, throughout its 130 years of expansion. Initial visits not only assessed the specific nursing situation but the situation as a whole. Their patients ranged in age from babes, children, adults to the elderly and referrals were taken from Hospitals, General Practitioners and allied Health facilities. Some of the care the Sisters provided is as follows: – Post-Natal care given to mother and babe, Wound Care following various types of surgery, accidents, burns, cancer, leg ulcers etc. Supervising and teaching Diabetic Care, including teaching and supervising people with Diabetes to administer their own Insulin, and administering Insulin to those unable to give their own injections. Administering other injections and setting up weekly medication boxes. The Sisters performed Catheterizations on adults suffering from conditions such as Quadriplegia, Paraplegia, Multiple Sclerosis (MS), Motor Neurone Disease (MND) and Guillan-Barre Syndrome, and when required at school on children for e.g. those with Spina Bifida. The Sisters visited those requiring Cystic Fibrosis support and care; those requiring Haemo-Oncology care, including visiting children at school; those requiring Home Enteral Feeding care, and those requiring IV therapy at home and home Dialysis. Palliative Care was given including pain relief with the use of syringe drivers, personal care as needed, and advice and support to both patient and family. The Sisters provided Stoma management to those needing Urostomy, Ileostomy and Colostomy care and those requiring Continence care. HIV/AIDS nursing care was provided; visits to Homeless Persons were made. Personal care was given to patients ranging in age and with varying mobility problems, such as those with MS, MND, Guillan-Barre Syndrome, Quadriplegia, Paraplegia, Acquired Brain Injury, to those following a Cerebrovascular Accident (Stroke), those with severe Arthritis and those with a form of Dementia. When necessary the elderly were assisted with personal care and advice given on safety factors with the use of hand rails, bath or shower seats, and hand showers. Rehabilitation with an aim towards independence remained at the forefront of the Sister’s minds and when possible using aids and instruction on safe techniques enabled the person to become fully independent. All care included giving advice and support to the patient and their Carers. The Sisters liaised with the persons Doctor, Hospital and allied Health personal as necessary.Black deep case made of man made material. it has a raised lid with attached handle. The metal section between the lid and body of the case has metal clasps attached to it which open and close within this section. The deep section contains a cotton bag sewn in sections which contain artery forceps, dissecting forceps, scissors, thermometer, wooden spatula. Shown are a packet of Band-Aids, plastic bottle containing chlorhexidine, jar containing soft-soap and jar containing Saf-sol which were carried within the body of the case.rdns, royal district nursing service, rdns equipment, melbourne district nursing society

Mary Howlett (1840-1922) began practising as a country midwife in 1866 in the western district of Victoria. She qualified as a 'ladies monthly nurse' in 1887 and continued to practise as a nurse and midwife until 1920.She began her six months training at the Melbourne Lying-In Hospital. She was known by many as 'Auntie', and her career spanned more than 50 years. Mrs Howlett's midwifery box and contents were given to Dr Frank Forster, and he donated them to the museum collection in 1993. The contents of this box are consistent with use by a midwife, but such a box would have been cumbersome and heavy to carry around. It is possible that Mary Howlett would also have had a bag for her midwifery requirements.This midwifery box is highly significant as it includes close to the original contents of one midwife's 'professional kit' up to 1920. The contents reveal something of the professional practice of a midwife in country Victoria at that time.A wooden box with hinged lift-up lid, one drawer, and an inner wooden tray. Rests at each side inside box indicate another tray may have originally sat across the top. Pasted inside the lid is a product list from Robert McDonald (chemist and druggist). There are locks for both the main chest section and the drawer. A circular section is cut out of the bottom of the drawer. The contents of the box include, enema syringe, a red rubber douche, glass breast pump, nipple shields, a thermometer in travel case. Also includes cotton bandages, a tooth extractor, and fetal stethoscope.midwifery

Black and white photograph and negative of Ballarat No. 26 eastbound in Sturt St., Saturday 14 August 1971 at the corner of Doveton St. Has the George V statute adjacent. Tram has destination of Lydiard St. North. Has Walter Connell Chemist on left hand side of photo, with a BP display thermometer showing temperature - about 12 degrees and a finger board for the Mid City Motel on chemist building. Original print by David Endacott, duplicate print (1261A) by John Phillips 12/99. Second copy added 5/2001. Original neg scanned at hi res and updated 11/5/2020.On original print "Last week of full tram service before phasing out / from Cnr of Sturt and Doveton Sts. / Sat 14 August 1971" in pencil.trams, tramways, ballarat, sturt st., doveton st., tram 26

Set of three Kodak cardboard mounted slides - have handwritten captions and slide numbers - no date, post dash canopy lights but with the largely green front - early 1960's. From the Eldon Hogan collection. Scanned on the Canon scanner at the depot 15/12/1971 at the time of the installation of the scanner. .1 - No. 16 and a bogie car at Charing Cross, early 1960's with the City Club Hotel in the background. .2 - No. 18 at Charing Cross with the destination of Quarry Hill and with the City Club Hotel in the background .3 - No. 25 at the Eaglehawk terminus with two crewmen standing in front of the tram. Tram has the destination of Eaglehawk. The Town Hall in the background has a money raising thermometer for the Olympic Swimming Pool fund..1 - "Trams at Bendigo" .2 - "Trams at Fountain at Bendigo" .3 - "Tram at Eaglehawk" all in penciltramways, trams, bendigo, eaglehawk, charing cross, tram 16, tram 18, tram 25

Perpetual Calendar from LH Abbott & Co. Dark Brown Cardboard with stippled finish. Gold Lettering. Symmetrical vase shape with a stand of black cardboard attached on the back. it has a small brass eyelet at the top to hang the item On the left hand side is a thermometer attached by small rivetts (10cm by 3cm) To it's right is a gold coloured tin frame (7cm by 5.5cm) In the frame sits light blue cardboard cards with white and black lettering telling the month, day and date which can be replaced each day. All complete.Sits in a light brown cardboard box (20.5 by 19 cm ) with stappled corners and a label giving directions. " In the event of the spirit becoming divided through inversion, a few sharp jerks will make right." Wording on Calendar. " Merchants. J.H. Abbott & Co. Bendigo. Mining Supplies - Market Square Boots and Shoes - Pall Mall. Iron, Steel, Leather, Farmers' Supplies.- "

This chronometer was made around 1936 and has been on display at Flagstaff Hill for over 40 years as part of the exhibit of the ‘Reginald M’, an Australian-built, 19ss, coastal trader vessel. A chronometer is an accurate mechanical instrument used for measuring time. It is constructed carefully to remain stable even under the changing conditions of seafaring life such as temperature, humidity and air pressure. The Master or Navigator of a ship could use the chronometer and the positions of celestial bodies to calculate the ship’s latitude at sea. In 1905 the business Chronometerwerke GmbH was formed in Frankfurt, Germany, to supply the country with high-quality mechanical chronometers and ship clocks for their maritime trade, making the country independent of other international suppliers such as those in England. In 1938 the firm was renamed Wempe Chronometerwerke. The business continues today. Its products now include its well-known chronometers, battery-powered ship clocks, ship’s bell clocks, barometers, barographs, thermometers, hygrometers, comfort meters to measure temperature and humidity, and wristwatches. The company also performs chronometer testing facilities for the State’s Weights and Measures office. The article written by Givi in July 2022 “The Basics of Marine Meteorology – a Guide for Seafarers” refers to the weather’s signs and patterns being repeated over and over, and the recording of these observations helps forecasters predict changes in the weather. The chronometer is an example of a mechanical navigational marine instrument in use in the early to the mid-20th century. The maker is significant as part of a German government initiative to be self-sufficient in the production of good quality marine technology. This chronometer is significant as part of the exhibit, the Australian-built vessel, 1922 coastal trader ‘Reginald M’, listed on the Australian Register of Historic Vessels and on display for over 40 years.Marine chronometer or marine clock, brass case, glass cover, Roman numerals, 24-hour numbers beside them. Two black hands, a keyhole for winding and ventilation holes in the side. The base has a collar with four machined mounting holes. Inscriptions are on the clock’s face."Made in Germany"" and ""WEMPE / CHRONOMETERWERKE / HAMBURG"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, marine meteorology, horology, chronometer, marine technology, latitude, marine navigation, mechanical instrument, scientific instrument, ship clock, chromometerwerke gmbh, wempe chronometerwerke, marine clock

Otto Schott, a chemist and glass engineer, had the vision of uniform production ie making glass items that would resemble one another. At the end of the eighteenth century, with most glass items still created by hand, the quality of output was still a guessing game. Schott was the first to render this an industrial certainty. 1884 Otto Schott, Ernst Abbe and Carl and Roderich Zeiss found the Schott & Associates Glass Technology Laboratory in Jena, Germany. Glastechnisches Laboratorium Schott & Gen was born. Production started in 1886. Original products included optical and thermometer glasses. The following year, a crucial discovery was made: borosilicate, a heat and chemically resistant glass. By it’s 25th year anniversary, the company had grown from an experimental glass factory into an internationally renowned manufacturer of optical and industrial glasses. Soon to be added was fiolax, tube-shaped glass used for vials, ampoules and syringes thus allowing the company to play a significant role in supplying Europe's nascent pharmaceutical industry. Post WW2 USA Army opens new factory in Mainz, West Germany and factory in Jena , East Germany taken over by the DDR State both using same trade name. Legal action for 30 years resolved in 1980 - split name. Berlin Wall 1989, Factories reunited 1991A pharmaceutical clear glass beaker with graduation 100ml -300ml DURAN 50Front : DURAN 50 / SCHOTT & GEN / MAINZ / JENA (ER) GLAS 300 Back : PYREX 300pharmacy, medications, medicines, glass manufacturing, glass works, early settlers, moorabbin, bentleigh, cheltenham, jenaer glaswerk schott & gen company, west germany, east germany, berlin wall, ww2 1939-45, schott otto, zeiss roderich

This Sikes brass hydrometer was manufactured by the optical and scientific instrument makers Kasner & Moss of 17 Collins Street West, Melbourne, in the latter part of the nineteenth century. The firm adverted hydrometers, as well as optical instruments, as early as August 13th, 1864, in The Age, Melbourne. This hydrometer set was donated to Flagstaff Hill in 1979 by local wine and spirits merchants Lynch Bros of Fairy Street, Warrnambool. Giffen Russell had established the business in 1878, and Harry Lynch took it over in the 1930s, and after he passed away in 1953 Kevin Matthew Lynch became proprietor of K M Lynch Food and Liquor. The business closed in the 2010s. The hydrometer may date back to the establishment of the business in 1878, as Kasner & Moss were selling hydrometers in Melbourne from 1864. Hydrometers were used to measure the density, or relative density, of liquids from the late 1600s. In 1816 Bartholomew Sikes won the competition for the most useful accurate hydrometer. Hydrometers were commonly used by distillers, vintners, and brewers to establish accurate measures of alcohol concentration in their beverages. Following this manufacturing process, government inspectors and excise officers used them to check that the labelled indications of alcohol-proof were correct and that the right amounts of duty were being paid. This hydrometer and its fitted and hinged wooden container show signs of heavy and protracted use in a working environment. Although the instrument has some parts missing and has been recently repaired, the original quality of the inlaid box and the fine engraving on the instrument and the attachable weights, are indications of the hydrometer’s very real value when new. This Sikes hydrometer, bearing the maker's mark of “Kasner & Moss Melbourne” and the registered number “20373”, was presented to the purchasing public as a precision-made instrument designed for professional use. The Sikes hydrometer is of local significance because of its implied association with the alcohol trade in the southwest region of Victoria. It was donated by a family member of Lynch Bros, a local licensed outlet for wines and spirits in the period before the general relaxation of liquor licensing laws in the State of Victoria. It may have belonged to Griffin Russell who established the liquor store in 1878.Hydrometer; original Sikes brass hydrometer in a polished wooden case with an inlaid plaque on the lid. The brass float is a sphere with a thin flat upper stem and a short, lower stem with a bulb-shaped end. The upper stem is engraved scale on both sides with the numbers 1 to 10, and five divisions between each number. There are ten fixed pegs in the base to secure the thick brass horseshoe-shaped, numbered, various-sized weights (20, 30, 40, 80, 90); the free pegs would have originally stored another five weights (10, 50, 60, 70, and 100). The empty compartment in the box suggests another part in the initial set, probably a thermometer. The fitted, fabric-lined box has two brass closures and two brass hinges. The scientific instrument shows signs of heavy use and repairs. The Serial Number on the float matches the Serial Numbers on the weights. The plaque on the lid, the float and the weights have inscriptions. Made by Kasner & Moss, Melbourne. Plaque: “SIKES HYDROMETER / KASNER & MOSS / MELBOURNE” On float's lower stem: “SIKES 20373” On one thin edge of the float's scale, engraved in script “Kasner & Moss” and stamped “MELBOURNE”, and symbol“P” rotated 90 degrees. On the opposite thin edge of the float: “N20.373”, “SIKES”, “I P % II O” (in ornate capitals). Each weight has s unique number, and the same serial number “20373”.flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, sikes hydrometer, scientific instrument, pressure measurement, measuring instrument, ullage tool, customs, excise duty, tax, alcohol content, proof, calibrate, standard weights and measures, tariff, kasner & moss, scientific instrument makers, specific gravity, liquid density, alcohol testing, technology, alcohol measurement, proof spirit, wine and spirits merchants, local business, brass measuring instrument, k m lynch, giffen russell, harry lynch

Joseph Fowler (1888-1972), was born 28 February 1888 at Bagworth, Leicestershire, England, With his brother Sydney, in the early 1900s Joseph worked in a fruit-preserving business run by an uncle at Maidstone, Kent, and continued with the firm after 1908 when it was relocated at Reading. He married in 1910 and emigrated in 1913 settling at Camberwell, Melbourne.The jars were first manufactured in 1915 in Melbourne, for a fruit-bottling business started at the rear of his small house and the company of J. Fowler & Co. had begun producing home-bottling kits containing a sterilizer, bottles, lids, rings and a thermometer. Initially Fowler travelled the district, selling his kits door-to-door from the back of a cart. In 1920 he bought a shop in Hawthorn, and registered his business as a private company.During the Depression Fowlers Kits became a household name. In 1934 Fowlers Vacola Manufacturing Co. Ltd was registered as a public company. Fowler retired in 1961, but remained chairman of directors; his son Ronald succeeded him as managing director. Joseph died 1972 and when Ronald died in 1978, the company was bought out by the Sydney firm, Hooper Baillie Industries Ltd; it in turn sold to Sabco Ltd of South Australia; in 1994, when Sabco went into receivership, Australian Resource Recovery Technologies re-established Fowlers Vacola Australia Pty Ltd's headquarters in Melbourne.The early settlers of Moorabbin Shire had to be self sufficient and grew their own fruit and vegetables even if not market gardeners They preserved their produce for use all year.A 1 pint, clear, glass, narrow neck bottle with original 'Fowlers Vacola' stopper.Top FOWLERS VACOLA Shoulder of bottle FOWLERS VACOLA ONE PINT FRUIT JUICE BOTTLE Base F452 / M / R trade mark Amarket gardeners, early settlers, moorabbin, bentleigh, cheltenham, fowler james, fowler ronald, fowler's vacola, food preservation

This photograph is taken in the Sterilizing room in the Royal District Nursing Service (RDNS) Footscray Centre. Sister Short is closing the door of the Autoclave to sterilize equipment and dressings which will then be used by a RDNS Sister when she is visiting a patient in the community. Sterilizing of equipment and dressings were carried out at each RDNS Centre. Royal District Nursing Service (RDNS) supplied sterilized equipment, such as ready set up catheter trays and dressing trays, as well as dressing packs for their trained staff (Sisters) to take to the home when attending to specific patient care. When the Sisters returned to the Centre they washed and set up the trays again ready for re-sterilization. Each RDNS Centre had an Autoclave room and equipment and dressings were sterilized each day.Black and white photograph showing Royal District Nursing Service (RDNS), Sister Margaret Short, who has short dark hair, and is wearing a white gown over her uniform, with the grey peaks seen. She is using the Autoclave in the Sterilizing room. The tall rectangular metal sterilizer stands in the centre of the photograph. There are several small dials and a larger square dial on its upper left, with a long encased thermometer in the centre and a large round dial to its right. Below this is the partly open large metal door of the sterilizing section. A thick horizontal metal piece runs from the left side of the sterilizer, across, and attached at the centre, of the door. Sister Short has her left hand on the turning bar attached to the centre section, and her right hand is on the locking section as she closes the door. Below the door are two switches and several small dials. To the left of the sterilizer is a cabinet, and to the right of Sister Short, eight small wrapped dressing packs are on a shelf. At the rear of the photograph the wall goes halfway up, with windows above.Photographer's Stamp. Quote No. GX 12 Handwritten informationroyal district nursing service, rdns, footscray centre, sterilizing, sister margaret short