standard for all services in the 1950's and 1960's mass produced moulded tin.ear protection as issued to all personalKhaki painted tin, hinged lid written instructions in lid, diagrammatic instructions in base in black lettering.Protectors ear drum (aust.) MK1 M Large on outside of lid. For inscription of internal markings refer to photo's of inside of tin.ear plugs, ear protectors

This type of ration tin was issued during the latter part of the Second World War. These rations were issued to every soldier involved in operations and were only to be opened if no other source of food was available.An unopened olive drab Australian Military Forces (AMF) Emergency Ration Tin. There are instructions printed in black ink on the inside surface of the lid. This should read 'INSTRUCTIONS FOR USE / To be consumed as found. / 1. HOT CHOCOLATE (if preferred) / Break up chocolate block and dissolve in hot water. / 2. TEA TABLETS: / Use one per pannikin, adding boiling water and sugar if required. / 3. SALT TABLETS : / To reduce fatigue and cure muscle cramp, take either in water or as desired. Normally stamped in the inside of an opened ration tin would be date, such as '10-44' indicating that it was produced in October 1944. The outside of the tin has printed in black ink 'A.M.F. / EMERGENCY RATION / D (Government broad arrow) D / . The bottom surface of the ration tin has printed in black ink " To be consumed only when no other rations of any kind are procurable. Consumption of this ration must be reported at first opportunity. Instructions for use are printed under cover of container and also on paper slip within can". ration, emergency ration, world war 1 ration

Part of the collection relating to the brothers Evan and Edward Jones. Both enlisted in 1915 in 29 Infantry Battalion. See The Jones Boys booklet for further information.The brothers Evan and Edward Jones were both from Kyneton. There is a collection of items held by Kyneton RSL relating to their war service.Damaged bullet case, held in lidded tin. There is a fragment of bullet case in the tin. Inscription on lid of tin, Yanke Doodle.pte evan edward jones

The beginning of standardised weights and measures began In Victoria when the Melbourne Observatory received sets of standard weights and measures, which had been tested in Britain against the then British Imperial standards. These included the primary standard yard and pound for the Colony of Victoria. Other standards of weights and measure held by shires and the administrative body's within the colony could then be compared to these primary standards. A Weights and Measures Act was passed in Victoria in 1862, establishing local inspectors throughout the colony. By the 1870s each local council and shire in Victoria held a set of standards that were used to test scales, weights and dry measures used by wholesalers, factories and shops. Every ten years the councils’ standards would themselves need to be rechecked against the Victorian Standards. The checking was done by the Victorian Customs Department in the 19th century, but with the transfer of responsibility for customs to the Federal Government in 1901, weights and measures function was retained by the Victorian Government and was shifted to the Melbourne Observatory. In 1904, a new building was erected at the south end of the Great Melbourne Telescope House, where the standard weights and measures and testing equipment was installed. This room had a large whirling apparatus for testing air meters and became known as the Whirling Room. When the Melbourne Observatory closed in 1944, the Weights and Measures Branch was formed to continue and this branch remained at the Observatory site unit until 1995. J & M Ewan History: J&M Ewan was a Melbourne firm that began by selling retail furniture and wholesale ironmongery. They had substantial warehouses situated at the intersection of 81-83 Elizabeth and Little Collins Streets, the business was established by James M Ewan in 1852. Shortly afterwards he went into partnership with William Kerr Thomson and Samuel Renwick. When Ewan died in 1868 his partners carried on and expanded the business under his name J & M Ewan. The business was expanded to provide a retail shop, counting-house and private offices. Wholesale warehouses adjoined these premises at 4, 6 and 10 Little Collins Street, West. This company provided and sold a large and varied amount of imported goods into the colony that consisted of agriculture equipment, building materials, mining items as well as steam engines, tools of all types and marble fireplaces. They also supplied the Bronze measuring containers in the Flagstaff Hill collection and the probability is that these containers were obtained by the local Melbourne authority that monitored weights and measures in the mid to late 19th century. The company grew to employ over 150 people in Melbourne and opened offices at 27 Lombard St London as well as in New Zealand and Fiji. The company also serviced the Mauritius islands and the pacific area with their steamship the Suva and a brig the Shannon, the company ceased trading in 1993. Robert Bate History: Robert Brettell Bate (1782-1847) was born in Stourbridge, England, one of four sons of Overs Bate, a mercer (a dealer in textile fabrics, especially silks, velvet's, and other fine materials)and banker. Bate moved to London, and in 1813 was noticed for his scientific instrument making ability through the authority of the “Clockmakers Company”. Sometime in the year 1813 it was discovered that one Robert Brettell Bate, regarded as a foreigner in London had opened a premises in the Poultry selling area of London. He was a Mathematical Instrument maker selling sundials and other various instruments of the clock making. In 1824, Bate, in preparation for his work on standards and weights, leased larger premises at 20 and 21 Poultry, London, at a rental of four hundred pounds per annum. It was there that Bate produced quality metrological instruments, which afforded him the recognition as one of one of the finest and principal English metrological instrument-makers of the nineteenth century. English standards at this time were generally in a muddle, with local standards varying from shire to shire. On 17 June 1824, an Act of Parliament was passed making a universal range of weights, measures, and lengths for the United Kingdom, and Bate was given the job of crafting many of the metrological artifacts. He was under instruction from the renown physicist Henry Kater F.R.S. (1777-1835) to make standards and to have them deposited in the principal cities throughout the United Kingdom and colonies. Bate experimented with tin-copper alloys to find the best combination for these items and by October 1824, he had provided Kater with prototypes to test troy and avoirdupois pounds, and samples with which to divide the troy into grams. Bate also cast the standard for the bushel, and by February 1825, had provided all the standards required of him by the Exchequer, Guildhalls of Edinburgh, and Dublin. In 1824, he also made a troy pound standard weight for the United States, which was certified for its accuracy by Kater and deposited with the US Mint in 1827. Kater, in his address to the Royal Society of London, acknowledged Bate's outstanding experimentation and craftsmanship in producing standards of weights, measures, and lengths. An example of a dry Bronze measuring container made specifically for J & M Ewan by possibly the most important makers of measurement artefacts that gives us today a snapshot of how imperial weights and measures were used and how a standard of measurement for merchants was developed in the Australian colonies based on the Imperial British measurement system. The container has social significance as an item retailed by J & M Ewan and used in Victoria by the authorities who were given legal responsibility to ensure that wholesalers and retailers of dry goods sold in Victoria were correct. The container was a legal standard measure so was also used to test merchants containers to ensure that their distribution of dry goods to a customer was correct.Maker Possibly Robert Brettell Blake or De Grave, Short & Co Ltd both of LondonContainer bronze round shape for measuring dry quantities has brass handles & is a 'half-bushel' measurement"IMPERIAL STANDARD HALF BUSHEL" engraved around the top of the container. VICTORIA engraved under "J & M Ewan & Co London and Melbourne" engraved around the bottom of the container.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, standard measure, bronze, peck measurement, j & m ewan, victorian standard dry measurement, bronze container, victorian standards, melbourne observatory, robert brettell bate

6 round metal tins, some with film inside."The Australian Religious Film Society" on 3 of the tins. "A Tartan Filmstrip" on 1 tin. "Joseph Part 11" on 1 tin. film strips, photographic equipment containers

Displayed in History House.Three glass containers (glass and silverplate) in a novelty carrier in shape of three tennis rackets. 390.1 - Base - metal, three round balls for feet. 390.2 - Mustard container - glass, silverplate lid, spoon (390.3) 390.4 - Salt cellar - glass, silverplate lid with holes in it. 390.5- - Mustard container (not part of original set), silverplate top and spoon (390.6)Front: NPNS (side, container top)

Tea was one of the first goods to be packaged in metal containers. Early import/export companies shipped it in metal-lined wooden crates. Pewter (widely used in England) was used one of the earliest metals used to fashion oriental style tea containers. Tin plated iron was made into tea canisters as early as 1790, often hand painted with places of the tea's origin. This tin has been adapted for use as a money box.In the mid-nineteenth century custom branded tins developed as a tasteful form of advertising. They were often cheap and decorative and found their way into households as gifts, often being kept as ornaments and storage boxes.They have survived well in many homes. A cylindrical metal Lipton's tin. The lid has a slot cut into it. The front panel has "LIPTON'S" above a red drawing of a tea factory and plantation with" TEA" below it. The print is white. There are panels framed in bamboo around the tin."Lipton tea, coffee and cocoa planter: Tea merchant by special appointment to his majesty King George V"tea-caddy lipton's container

The box contains two tins of survival biscuits, all packets unopened in both..1) & .2) Two large tins of survival biscuits. The tins have a round lid on top. .3) Cardboard box for storing and transporting tins..1) & .2) (Front of tin) SURVIVAL BISCUITS PEEK FREAN (AUST) PTY. LTD. 48 Pkts. X 6 oz. 18lb net. .3) (Front of box) SURVIVAL BISCUITS DSN 8920-66-025-8940 96 x 60oz PACKETS B.C. 320 PEEK FREAN (AUST) PTY. LTD. WE 11/71 (Side of box) St 43LBGW Kangaroo insignia ARMY biscuits, tin, army, rations

A small collection of draftsman's nibs used by Cliff Lowerson (dec.).Collection of miscellaneous draftsman's pen nibs, in "Strepsils" tin.Feb 86 (tin)pen nibs

2 Biscuit tins:- 1 round tin with Olympic motif of Melbourne 1956 Games, Made in Australia by Phoenix Biscuits P/L, Melbourne. Tin made by Willow Aust. and 1 oblong tin from Griffiths Sweets P/L Melbourne, with picture of Melbourne Olympic rings and logos on lid and side."XVIth Olympiad Melbourne 1956" - Round tin "Melbourne Home of Olympic Games 1956" - Oblong tintins

Tin Hat Day was established in 1922 after the end of WWI. It raised funds to benefit returned soldiers who had fallen on hard times after the war and during the Great Depression. It continued on during WW2 and into the 1950s. This badge is c1940. The tin hat badge was modelled on the British steel combat helmet known as the Brodie helmet, designed and patented in London in 1915 by John Leopold Brodie. Colloquially, it had many names including the shrapnel helmet, battle bowler, Tommy helmet, tin hat, dishpan hat, tin pan hat, washbasin, and in the United States the doughboy helmet. The German Army called it the Salatschüssel (salad bowl).Tin Hat Day was a significant annual event over several decades. Badges such as are not rare; they were sold in large numbers but as ephemeral items relatively few of those sold were retained.A round metal badge with a domed centre, mimicking a stylised tin hat. Red with black inscription. It has a tab on the upper centre edge. This would have enabled it to be pinned through a buttonhole or similar.Centre: MY / TRIBUTE / TO THE/ FIGHTING / FORCES Around the rim: TIN HAT APPEAL / RSL WAR SERVICE FUNDworld war 2, fundraising, commemorative badge, badge, tin hat badge

The beginning of standardised weights and measures began In Victoria when the Melbourne Observatory received sets of standard weights and measures, which had been tested in Britain against the then British Imperial standards. These included the primary standard yard and pound for the Colony of Victoria. Other standards of weights and measure held by shires and the administrative body's within the colony could then be compared to these primary standards. A Weights and Measures Act was passed in Victoria in 1862, establishing local inspectors throughout the colony. By the 1870s each local council and shire in Victoria held a set of standards that were used to test scales, weights and dry measures used by wholesalers, factories and shops. Every ten years the councils’ standards would themselves need to be rechecked against the Victorian Standards. The checking was done by the Victorian Customs Department in the 19th century, but with the transfer of responsibility for customs to the Federal Government in 1901, weights and measures function was retained by the Victorian Government and was shifted to the Melbourne Observatory. In 1904, a new building was erected at the south end of the Great Melbourne Telescope House, where the standard weights and measures and testing equipment was installed. This room had a large whirling apparatus for testing air meters and became known as the Whirling Room. When the Melbourne Observatory closed in 1944, the Weights and Measures Branch was formed to continue and this branch remained at the Observatory site unit until 1995. J & M Ewan History: J&M Ewan was a Melbourne firm that began by selling retail furniture and wholesale ironmongery. They had substantial warehouses situated at the intersection of 81-83 Elizabeth and Little Collins Streets, the business was established by James M Ewan in 1852. Shortly afterwards he went into partnership with William Kerr Thomson and Samuel Renwick. When Ewan died in 1868 his partners carried on and expanded the business under his name J & M Ewan. The business was expanded to provide a retail shop, counting-house and private offices. Wholesale warehouses adjoined these premises at 4, 6 and 10 Little Collins Street, West. This company provided and sold a large and varied amount of imported goods into the colony that consisted of agriculture equipment, building materials, mining items as well as steam engines, tools of all types and marble fireplaces. They also supplied the Bronze measuring containers in the Flagstaff Hill collection and the probability is that these containers were obtained by the local Melbourne authority that monitored weights and measures in the mid to late 19th century. The company grew to employ over 150 people in Melbourne and opened offices at 27 Lombard St London as well as in New Zealand and Fiji. The company also serviced the Mauritius islands and the pacific area with their steamship the Suva and a brig the Shannon. Robert Bate History: Robert Brettell Bate (1782-1847) was born in Stourbridge, England, one of four sons of Overs Bate, a mercer (a dealer in textile fabrics, especially silks, velvet's, and other fine materials)and banker. Bate moved to London, and in 1813 was noticed for his scientific instrument making ability through the authority of the “Clockmakers Company”. Sometime in the year 1813 it was discovered that one Robert Brettell Bate, regarded as a foreigner in London had opened a premises in the Poultry selling area of London. He was a Mathematical Instrument maker selling sundials and other various instruments of the clock making. In 1824, Bate, in preparation for his work on standards and weights, leased larger premises at 20 and 21 Poultry, London, at a rental of four hundred pounds per annum. It was there that Bate produced quality metrological instruments, which afforded him the recognition as one of one of the finest and principal English metrological instrument-makers of the nineteenth century. English standards at this time were generally in a muddle, with local standards varying from shire to shire. On 17 June 1824, an Act of Parliament was passed making a universal range of weights, measures, and lengths for the United Kingdom, and Bate was given the job of crafting many of the metrological artifacts. He was under instruction from the renown physicist Henry Kater F.R.S. (1777-1835) to make standards and to have them deposited in the principal cities throughout the United Kingdom and colonies. Bate experimented with tin-copper alloys to find the best combination for these items and by October 1824, he had provided Kater with prototypes to test troy and avoirdupois pounds, and samples with which to divide the troy into grams. Bate also cast the standard for the bushel, and by February 1825, had provided all the standards required of him by the Exchequer, Guildhalls of Edinburgh, and Dublin. In 1824, he also made a troy pound standard weight for the United States, which was certified for its accuracy by Kater and deposited with the US Mint in 1827. Kater, in his address to the Royal Society of London, acknowledged Bate's outstanding experimentation and craftsmanship in producing standards of weights, measures, and lengths. An example of a dry Bronze measuring container made specifically for J & M Ewan by possibly the most important makers of measurement artifacts that gives us today a snapshot of how imperial weights and measures were used and how a standard of measurement for merchants was developed in the Australian colonies based on the Imperial British measurement system. The container has social significance as an item retailed by J & M Ewan and used in Victoria by the authorities who were given legal responsibility to ensure that wholesalers and retailers of dry goods sold in Victoria were correct. The container was a legal standard measure so was also used to test merchants containers to ensure that their distribution of dry goods to a customer was correct. Bronze round container with brass two handles used as a legal standard for measuring dry quantities & is a 'peck' measurement. "IMPERIAL STANDARD PECK" engraved around top of container with " VICTORIA" engraved under.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, standard measure, bronze, peck measurement, j & m ewan, victorian standard dry measurement, bronze container, victorian standards, melbourne observatory, robert bettell bate

Bristle shaving brush with red handle. Brush fits into a bakelite container with lid.CM A Y6 6o on container|Imperial on Brushpersonal effects-toilet requisites, shaving

Two metal tins of which one fits into the other. Larger tin has two handles, smaller tin has only one handle as the other has broken off.Smaller tin - D(arrow)D, IDtin, mess tin

The tablets are in a collection relating to Arthur Richard GROAT Known as Dave. Enlisted No VX74724 in the 2nd AIF on 7.2.1942 age 23 years. On discharge 30.1.1946 he was a Pte in 108th GeneralTransport Coy. Metal tin containing Atebrin tablets.On bottom of tin "Atebrin, (0.1 GRAMME)”containers - commerical, medicine - pharmacy, atebrin

These little tins were available for soldiers to buy before embarking to the first world war. As the candles and matches are contained within the tin , it would have been a ideal way to keep both dry. The lid of the tin could also have been useful as a windshield. The tin was donated in memory of Les Lawlor. James Leslie Lawlor was born in Mepunga and lived in Warrnambool and enlisted in October 1916. He was discharged as medically unfit as he had broken his wrist three years previously and the break had failed to heal well. The tin was donated in his memory by his sister Vera Maguire This item with its link to World War 1 soldiers has historical significance to Australians in general but is also a link to a local family. It is a complete object still with the candles and matches. Small rectangular tin box with image of three soldiers and tents in the background. Brown and yellow check pattern on sides and bottom. Small round hole in bottom with metal rim inside the tin , in which a candle would be placed. There are two small candles and a rectangular section in which a box of matches in sitting. Hinged lid.On lid," Camp pocket Candlestick. A soldier's friend. On base " Patented 19/7-15 No 16856." On tape on the bottom of tin, " Would like this to go to the historical society in memory of Les Lawlor, Vera Maguire.warrnambool, james leslie lawlor, vera maguire, camp pocket candlestick, world war 1

This tin once contained Rayleigh's Nutmegs, a cooking ingredient. It was donated with other similar tins that were used by the donor’s mother who was married in 1932. It those times in Australia all manner of household items, including food and drink, were sold by hawkers (salesmen) who travelled from door to door in both suburban and rural areas. The donor remembered the tin on her mother’s pantry shelf. The Rawleigh Nutmegs label stated “Selected whole nutmegs not ground but granulated to preserve full strength and flavour.” The company had operated in Melbourne, Australia, and Wellington, New Zealand. W.T. Rawleigh & Co. was established by William Rawleigh in America in 1889 and later expanded into Australia. The company made a variety of household products in a factory in Collins Place, Melbourne, between 1930 and 1935. It specialised in medicines and remedies, food additives, cleaning products and toiletries. The company in Melbourne expanded into their factory in Dawson Street, Brunswick, in the mid-1930s. Independent salesmen, often referred to as ‘The Rawleigh’s man’, sold Rawleigh products door-to-door between the wars and after the Second World War in the Melbourne suburbs. Rayleigh’s products are still produced today. The tin is significant for its association with W.T Rawleigh, one of Melbourne’s strong growing manufacturers in period particularly between the World Wars. Rawleigh’s was, and still is, well known for its household and cleaning products, medicines, food additives and toiletries. The tin increases in significance for its use as a recognised object found in many Australian kitchens since early days. It gives a snapshot into domestic life and social norms of the pre and post war period in Melbourne The tin is significant for its association with a local family in the 1930s for the preparation of family meals. Rawleigh spice tin, rectangular, tall, used for storing Rawleigh's nutmeg. Tin has a flip-top lid, is coloured gold and comes with directions for use on front, back and sides of container.Text includes “W.T. RAWLEIGH Co. Ltd.”, “MELBOURNE / AUSTRALIA”, WELLINGTON / NEW ZEALAND” “Rawleigh’s / NUTMEGS” Motif: man’s portrait in a circle. Other text includes information about spices.tin container, flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, food container, tin, kitchen item, container, cooking ingredient, grocery, spice container, nutmeg, rawleigh co.

This veterinary equipment was found in an old walk-through dairy at Wombat Track. The instruments have been identified by Vet, Peter Honey,(9.1.2019) as instruments used to gain access to a teat cavity in a cow and to remove a blockage in the teat. They are possibly an improvised tool used c 1900-1950's.These items are representative of items used in Orbost on dairy farms in the first half of 20th century.A small set of instruments and container made of metal -possibly stainless steel. The instruments are a small spoon and two probes.On outside of container : D.C.L. SCOTCH WHISKYbistoury veterinary-equipment dairy farming

Salvation Army Donation Tin. Two photographs possible the front and back of one tin. Inscriptions reflect the role of the Salvation Army and their work during this period.Black & white photographs of Donation tin enlarged. Front of tin what is readable "The Salvation Army Society RESCUE AND PRISON GATE WORK broken hearts and blighted hopes slaves of Sin and Degradation. Blood and Fire. The Salvation Army. THE TOTAL number of Homes is now over Six--- Providing Daily Accommodation for 3,000 Persons AND COSTING over --1,200 PER WEEK for MAINTENANCE PLEASE HELP by placing a COIN in the box" On the back of the tin "THE ARMY PROVIDES work for the workless. Love for the Loveless. Cleanliness for the Unclean. Friendship for the Friendless. Food for the Hungry. Help for the Helpless. Beds for the Bedless. Hope for the Hopeless. Our Agencies Comprise the Following. Homes for Discharged Prisoners. Rescue Work for fallen Women. Industrial Homes for Boys. Industrial Homes for Girls. Maternity Bags. Women Shelters, Nursing Homes, Labour Tards. Samaritan Relief Work. Food Depots. Mens Shelters. Industrial Hospital Visitations. Gaol Visitation. Enquiries for Lost F" In Pencil written on the back "Larger than actual Size"stawell religion

Rear of container - information. RAN SUBMARINE SQUADRON 25TH ANNIVERSARY. NUMBER NAME LAID DOWN LAUNCHED FIRST COM'D 57 OXLEY 2/7/64 24/9/65 27/3/67 59 OTWAY 29/6/65 29/11/66 22/4/68 70 OVENS 17/6/66 4/12/67 18/4/69 60 ONSLOW 26/5/67 3/12/67 22/12/69 61 ORION 6/10/72 16/9/74 15/6/77 62 OTAMA 28/5/73 3/12/75 27/4/781. & 2. Unusual shaped ceramic container to be used for Port. Black glossy glaze with illustration. 1. Front - 2 gold dolphins and decoration in gold, white and red with inscription in silver "ANNIVERSARY/ 25th" Back - list of RAN Submarine Squadron vessels. 2. Back - in shape of crown with - list of RAN Submarine Squadron vessels.Information print in white on container. See Context Historical.souvenirs, anniversary, ran, submarines

This tin once contained McKenzie’s baking powder, a cooking ingredient. It was donated with other similar tins that were used by the donor’s mother who was married in 1932. It those times in Australia all manner of household items, including food and drink, were sold by hawkers (salesmen) who travelled from door to door in both suburban and rural areas. The donor remembered the bicarb soda tin on her mother’s pantry shelf. The McKenzie’s Baking Powder label adds the information that the ingredients were “Prepared with Aerophos, Regd. Trade Mark, the finest raising ingredient. A product of Albright & Wilson, Australia Pty. Ltd.” It also says that it “Excels all others in use”. The company began in Melbourne in 1852 and continues today, now run be the fifth generation of descendants from the original owners. This tin originates in the early 1900s from an Australian company that is now managed by fifth generation descendants of the original family after its inception in 1852. The tin increases in significance for its use as a recognised object found in many Australian kitchens since early days. It gives a snapshot into domestic life and social norms of the pre and post war period in Melbourne The tin is significant for its association with a local family in the 1930s for the preparation of family meals. Tin container, cylindrical, with cream and green paper label with gold highlights, motif and text. Used for selling McKenzie’s Excelsior baking powder. Container has push-on lid. Quantity of 1LB. NET. Made in Australia by McKenzie Ltd.Text includes “CLIFFORD LOVE, McKENZIE PTY. LTD.” “McKENZIE’S EXCELSIOR / BAKING POWDER”. Motif: man’s portrait within oval frame with wheat sheaf border, placed below figures of sun, moon and stars. Information and instructions. flagstaff hill asset, baking powder tin, container, flagstaff hill museum, kitchen item, cooking ingredients, flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, tin, cooking ingredient, food container, grocery, cookery, rising agent, baking powder, mckenzie, mckenzie foods

Would have been used for eye protection by drivers of automobiles before they were completely enclosed, by airmen in open cockpit airplanes, by balloonists, or by motor cycle riders. Hinged goggles, metal framed glass lenses, stockingette & wool protective rims behind lenses. Elastic fastener for securing to head. Tin container, rectangular to hold goggles, coloured mainly yellow, hinged lidOn tin: Around lid: "Made in France". Around tin: "OTO" several times. Also several balloon-shaped trade marks. Black painted picture of goggles on top of box. Lettering in trade mark "Marque Deposé / Brevete SGDG"driving equipment, eye protection, cars, motor cycles, motor bikes, airplanes, pilots, dispatch riders

Perutz was the German firm of chemist Otto Perutz, and was established in 1870. It was the first company to produce a roll film for the Leitz camera.A clear film roll and silver metal film roll tin. On tin: "PERUTZ/6x9/620"photography, photograph, photo, camera, leitz camera, perutz, german, germany

Made at Camp 3 by Mr. Kaltenbach a tin smith formerly of Palsetine . See also C7962 toolsMade in Camp 3 at TaturaSmall Tin Soap Dish / Container, oval in shape, with hook on one side. Wider at top than base, three holes in base for draining, hook extends from base and is soldered to body of dish. Made from tin and painted silverSticker on back with H. Anderson written on it

The Anti-moth crystals were sold with the Electrolux Vacuum, along with the many other attachments, including the vaporiser. The crystals were made of paradichlorobenzene which is used in mothballs. Electrolux, founded in Sweden, has been manufacturing vacuum cleaners since 1919. On the back of the tin - 'Poisonous - Not to be taken - Electrolux Pty. Ltd., Melbourne - When used in conjunction with the vaporiser supplied with the Electrolux cleaner in this tin, Electrolux anti-moth crystals will destroy moths and moth larvae and are also effective against silverfish and other similar pests. Crystals or vapour will not harm fabrics in any way. Keep tin in cool place. - Kills Moths'A small empty vintage red, white and blue round lidded tin, 'Electrolux Anti-Moth Crystals'. The brand is printed in blue text on the middle white and red bands of the tin, with a moth shape included. The manufacturer is printed inside a white star shape on the blue lid. Detailed instructions for use is printed on the back in blue and red lettering. 'Electrolux Anti-Moth Crystals'. On the back of the tin printed in red 'POISONOUS - Not to be taken Electrolux Pty. Ltd. Melbourne' Full details for use is also provided. vacuum cleaners, cleaning equipment, domestic equipment, electrolux

Coin collections have a long and varied history. Coins were often collected in churches in a box located near the entrance/exit, and later via a collection plate that was passed amongst the congregation Funds were used to repair the church or feed the poorest of the parish. The donation of coins is and was considered part of religious life and mentioned in Christian, Jewish and Islamic texts. With the need and expansion of charitable works occurring outside religious life, charity boxes began to spread into hospitals, orphanages and asylums. The need for non-fixed boxes grew with the rise in charities and their activities outside a fixed building. Collection boxes could be large (and therefore hard to move) or could be held by individuals acting as collection agents, working at a specific location, moving between dwellings or at events. In this example, the Vision Australia tin could be used gathering coins at events such as Carols by Candlelight or other special marketing days.1 metal coin collection tin with paper wrapPaper wrapper around tin: Help me to break down the barriers and achieve greater heights Vision Australia blindness and low vision services Paper on top of tin: Thank you for your support Vision Australia blindness and low vision servicesvision australia, fundraising

This early 1900's tin which contained loose leaf blended tea was imported into Australia by those tea merchants who wanted to provide the Australian tea drinkers with quality tea. It could well be early Lipton distributors to both city and rural clients and consumers. This was in a period when most rural families were heavy tea drinkers. It was well before the introduction of coffee as a drink (especially instant) for the early morning, after meals and general "drink any time" pick me up beverage.This relatively large tea tin marks a period in time when loose leaf tea was in great demand and large quantities were not only used by families but also restaurants, workers mess halls and remote large rural families. The ability to obtain a quick tea supply in semi remote rural areas such as the Kiewa Valley was not possible due to the factors of all weather road access and the economics of traders going out of their way. Stocking up with important beverages, such as tea, was a "one of those things" that early rural communities had to endure with. Bulk storage tins such as this item were not only a requirement but also offered storage for other household items. This usefulness was not overlooked by the "canny" rural family.This large metal tin container was specifically manufactured for the kitchens requiring a bulk storage "bin" type of loose leaf tea content. When emptied, it could also be used as a general kitchen storage container for other bulk consumables.On the front side and in the background, there are three sketches of Egyptian pyramids(increasing in size from left to right). At the forefront there is a camel "train" loaded with supplies and handlers, making their way over the sandy desert going towards a large sign(in a freehand script) "PYRAMIDS BLEND". The left side "Specially Selected" and underneath "PURE TEAS" below this and within a circle is the figure of a Geisha clad of Asian appearance (with a fan in a raised hand with boxes(of varying sizes) around her. All these are in (off white design and wording on a green background. On the back in green print on off white background "PYRAMIDS BLEND" and underneath "OF SPECIALLY SELECTED PURE TEAS". On either side are columns of similar print. To the left "THESE UNRIVALLED BLENDS ARE GUARANTEED TO CONTAIN ONLY PURE TEAS".To the right "SPECIALLY SELECTED FROM THE CHOICE GROWTHS OF CHINA INDIAN & CEYLON". Below both columns is "for delicacy & fragrance of flavor, combined with great strength, and are confidently recommended to the public as the best values in teas obtainable" On the last side is a sketch of an " Indian encircled, holding a staph with palm trees in the background and four tea containers on his left, with "PYRAMID BLEND" as a subject heading. There are two Oxen pulling a two wheeled cart with a load of six large boxes. On lid and barely readable "FIVE POUNDS NET"loose leaf tea containers, food storage tins, kitchen tidies

The British Australasian Tobacco Co. was based in Melbourne and Sydney. The parent company was founded in England, circa 1902. This item "HAVELOCK" is one of many ready rubbed tobacco tins produced by the British Australasian Tobacco Company.The ready rubbed tobacco held within the tin was mainly used by those smokers who rolled their own cigarettes. These smokers would have mainly used their palm and formed a cup then placing their choice of the amount of tobacco to be rolled. This would then be placed on the fine cigarette paper and rolled and sealed (using saliva in the mouth) into the required shape. There were mechanical "roll your own" gadgets on the market but most rural users, especially males used their palms. (Ref Victorian Collections)Roll your own cigarettes were popularly used in rural areas, especially when "tailor made" cigarettes were more expensive. Tobacco consumption in Australia is decreasing and fewer smokers are "rolling their own" cigarettes.A dark green rectangular shaped metal Havelock tobacco tin with a weave pattern. It is made from tin plated thin rolled steel. The lid is attached by two hinges.Lid - top left in gold coloured letters "HAVELOCK". bottom -"READY RUBBED TOBACCO" "2oz NET WEIGHT WHEN PACKED". Rim - "THE BRITISH AUSTRALASIAN TOBACCO CO. PTY. LTD." Inside lid -black print on gold background - "Every tin of genuine HAVELOCK Ready Rubbed Tobacco has the mane Havelock printed on the paper lining, and also on the band or wrapping sealing the tin. On the hinge side of the lid is "HAVELOCK READY RUBBED"tobacco cigarettes tin

This is part of a collection donated by Mrs Margaret McKenzie that belonged to her husband and was issued to him during the Second World War, the mess tins were marked with names of places, ships and battle locations. Other items include a postcard sent home in August 1941 and a photo of Australian troops on parade at Wewak in August 1945Aluminium Mess tin set, 2 rectangular tins one smaller to fit into larger. Inscriptions engraved on 4 sides containing locations of training, ships and battle areas. Additional markings include year of manufacture and company along with Department of Defence broad arrow. Item is stamped metal with wire handle on the large tin. Wire carry handle missing on smaller tin. "Inscription on base of mess tin large. 'DARLEY ALBANY/ SYDNEY/ PERTH/ TRINCOMALEE:CEYLON/ PORT TUFIC/ SUEZ CANAL/ EL CANTARA/ GAZA/ JERUSALEM/ HIFA TELAVIV/ BETHALEM/ BAYROUTA/ JUDEDES FIAKE/darwin, world war two, pan set messing, mess tins, aluminium, 2nd aif, 8th battalion, vx52576, pte, mckenzie, c mckenzie, 1939, c b ltd, 1941 1945, 19th australian infantry training battalion, b company, 21st august 1941, finchaven, wandecla, cairns, brisbane

This mess tin belonged to MELIA JAMES HENRY : Service Number - VX18960 : Date of birth - 08 Oct 1900 : Place of birth - WARRINGTON ENGLAND : Place of enlistment - CAULFIELD VIC : Next of Kin - CHURTON MARGARET The mess tin was manufactured by Sellman & Hill (S&H) Ltd from Wolverhampton. British aluminum mess tins were used by most of the Empire early in the war. A new pattern of mess tin was developed for the Web Equipment 1937 Pattern, which was a nested, two-piece rectangular mess tin with long, folding handles. Mess tins were used to prepare or heat food but they were also used as a container from which to eat and drink. The tins were lightweight and sturdy but they became hot very quickly when heated. Mess kit consisting of two pieces: One rectangular aluminium mess tin from WWII with multiple hand-carved inscriptions on outside indicating owner and locations he was stationed in 1940 and 1941. Welded handle attachment, although handle itself is missing. There is also a small, flat bottomed aluminium cup.Multiple hand-carved inscriptions on three external sides of the mess tin: Side one: "1940 Palestine / Egypt / VX18960 / Dvr Melia. J / AASC / 1941 Libya" Side two: " BARDIA / GREECE / TOBRUK" Side three: " Gaza / Beit Jerga / Kfar Vitkin / jaff / TEL-AVIV / Jerusalem / Nazareth / Haifa" Manufacturer's hallmark stamped on side four: "S.&H. LTD / 1938" and below that a stamp of an arrow pointing upmess tin, aluminium mess tin, wwii, wwii mess tin, sellman & hill, british mess tin