Manufactured for the Hawthorn Tramways Trust for use on Uniform Jackets and Great Coats. Demonstrates a button made for the HTT Set of four Coat buttons for the Hawthorn Tramways Trust - HTT - made by Stokes and Sons Melbourne. The badge backing piece is brass. It is fitted with a lug for sewing onto a jacket and has the name of the manufacturer stamped on the rear part. See item 581 for another example, smaller in diameter. tramways, trams, badges, uniforms, hawthorn, htt, buttons

Pressed metal uniform badge for the Melbourne Tramways Board, workshop staff, available all lines. Round pressed steel badge with the words "All Lines" pressed into the badge around the top portion of the badge, the word "Car Works" and number "25" pressed into the lower half of the badge -with small horizontal lines within the individual letters. Has a brass finish with the Melbourne Tramways Board logo in the lower part of the badge. On rear badge two metal lugs have been soldered onto the badge and a leather strap with a button hole cut into to enable it to be worn on a uniform. Leather strap secured with wire. Used possibly from mid 1910's when the Board was formed until it was replaced by the MMTB in 1921. Similar badges made for ESCo Ballarat by Stokes and Sons.trams, tramways, badges, employees pass, tb, workshops, tramway board

Set of three coat buttons: 1 - Small Prahran and Malvern Tramways Trust - PMTT - made by Stokes and Sons Melbourne - approx. 20mm dia. The badge backing piece is brass. 2 - Large PMTT - heavily worn - made by Stokes and Sons Melbourne - approx. 26mm dia - missing lug. 3 - MMTB button or Badge - damaged - made by Buttons of Birmingham UK - approx. 25mm dia. Each button has a backing piece on rear with a lug (except for 2) for sewing onto a jacket and have name of manufacturer stamped on rear part. "Buttons Ltd" of Birmingham, England has their trade mark, a pair of fully opened scissors.trams, tramways, mmtb, melbourne tramways, uniforms, buttons, pmtt

Pressed metal uniform badge for the Melbourne Tramways Board, Employees, available all lines. Round pressed steel badge with the words "All Lines" pressed into the badge around the top portion of the badge, the word "TRAMWAY EMPLOYEE" and number "10" pressed into the lower half of the badge -with small horizontal lines within the individual letters. Has a brass finish with the Melbourne Tramways Board logo in the lower part of the badge. On rear badge two metal lugs have been soldered onto the badge and a leather strap with a button hole cut into to enable it to be worn on a uniform. Leather strap secured with a brass rivet. Used possibly from mid 1910's when the Board was formed until it was replaced by the MMTB in 1921. Similar badges made for ESCo Ballarat by Stokes and Sons, see all Reg Items 394 and 579.trams, tramways, badges, employees, tb, mmtb, passes

Small Hawthorn Tramways Trust - HTT - made by Stokes and Sons Melbourne - approx. 20mm dia. The badge backing piece is brass. It is fitted with a lug for sewing onto a jacket and have name of manufacturer stamped on rear part.trams, tramways, melbourne tramways, uniforms, buttons, htt

Set of five nickel silver MMTB Coat buttons. Three of the buttons (approx. 22mm dia) are made by Stokes and Sons Melbourne and the two (approx. 25mm dia) are made by K. G. Luke Australasia. The badge backing piece is brass. It is fitted with a lug for sewing onto a jacket and have name of manufacturer stamped on rear part. The Stokes and Sons badges are two small holes in the rear, while the Luke's badges do not.trams, tramways, melbourne tramways, uniforms, buttons, mmtb

White baseball style cap, with a "Love your trams" symbol on the front and "Yarra Trams" logo on the rear. Velcro strap on rear. Sew with white cotton, button on top, stiff card peak to the cap.trams, tramways, cap, yarra trams

Four page, stapled A4 sized photocopied document titled "AVM Control Head", revised July 1989. Gives a drawing of the layout of the control head for the Automatic Vehicle Monitoring communications system fitted to Melbourne trams and buses. Has the details for each button, a sheet on the "Tactical Message" and the details of each message, and a sheet on the AVM Control Centre and the staffing arrangements, including pay scales. See also other associated instruction documents - search subjects for AVM. 54.1 - three page stapled A$ - ditto - dated July 1991 - does not include information on the AVM Control centre.trams, tramways, avm, automatic vehicle monitoring, instructions, computers, communications, control centre

Yellow moulded rubber soft or flexile toy Rhino with words "Look Listen, be alert around trams / Yarra Trams" on one side and "A tram weighs as much as 30 Rhinos". On the underside has a grey button when pushed makes the sound of an "electronic tram" gong - twice. Two copies held.trams, tramways, yarra trams, safety, rhinos

Adhesive label or sign for use on the press for information button and speakers and CBD tram stops - has the letter I within a circle and the words "Press for Information" underneath. On the base has Yarra Trams contact call numbers. Two copies held.trams, tramways, yarra trams, timetables, melbourne, information

Button used by The Met on their uniform jackets with the first logo or symbol used by The Met.Demonstrates a The Met Uniform button.Button - brass - The MTA (Metropolitan Transit Authority) of The Met logo with a raised metal finish - made by Stokes Australia - approx. 23mm dia. The badge backing piece is brass. It is fitted with a lug for sewing onto a jacket and have name of manufacturer stamped on rear part. Two copies held. The second copy has a section of thread wound around the lug,"Stokes & Sons Australia" stamped on the rear.trams, tramways, melbourne tramways, uniforms, buttons, the met, mta

Use to identify a tramway employee, involved in signalling duties and available for all lines on the Tramway Board and MMTB systems. Demonstrates the method of identifying MMTB employees involved in signalling duties.Round pressed brass badge with the words "Signalman" pressed into the centre of the badge, and around the top part "17 - All lines" and the Tramway Board logo on the bottom. A leather button hole strap has been fitted to the rear of the badge. The words have been infilled with a black enamel paint.badges, mmtb, cable trams, tramway board, signalmen

Use to identify a tramway employee, that provided free travel on the tramway system. Made by Stokes and SonsDemonstrates the method of identifying MMTB employees.Round pressed brass badge with the words "Employee" pressed into the centre of the badge, around the bottom portion of the badge, the number "55". Has a nickel-plated finish with the M&MTB initials on the top part of the badge. On the rear of the badge, two metal lugs have been soldered onto the badge to enable it to be worn on a uniform with a leather strap on a button. Part of the leather strap remains and has been tucked in.badges, mmtb, employees pass

Use to identify a tramway employee, involved in equipment testing duties and available for all lines on the Tramway Board and MMTB systems. Demonstrates the method of identifying MMTB employees involved in equipment testing duties.Round pressed brass badge with the words "Tester" pressed into the centre of the badge, and around the top part "4 - All lines" and the Tramway Board logo on the bottom. A leather button hole strap has been fitted to the rear of the badge. The words have been infilled with a black enamel paint.badges, mmtb, tramway board

Use to identify a tramway employee, involved in delivery of messages, correspondence etc in the Eastern Suburbs system. Made by Stokes and SonsDemonstrates the method of identifying MMTB employees.Round pressed brass badge with the words "Messenger" pressed into the centre of the badge, around the bottom portion of the badge, the letters "ES". Has a nickel-plated finish with the MMTB initials on the top part of the badge. On the rear of the badge, two metal lugs have been soldered onto the badge to enable it to be worn on a uniform with a leather strap on a button.badges, mmtb, messenger

Use to identify a tramway employee, involved in track repairs for the Prahran and Malvern Tramways Trust - PMTT. Made by Stokes and SonsDemonstrates the method of identifying PMTT Employees involved in track maintenance.Round pressed brass badge with the words "TRACKMAN" pressed into the centre of the badge, around the bottom portion of the badge, the number "10", with the P&MTT initials on the top part of the badge. Has a nickel-plated finish with the letters have been infilled with a red enamel paint. On the rear of the badge, two metal lugs have been soldered onto the badge to enable it to be worn on a uniform. Two copies held - second one No. "34" fitted with a leather button hole strap.badges, controllers, pmtt, track maintenance