EIG School - Ralph Birrell Collection. - Construction of Latrobe Uni. C1966. Bendigo Institute of Technology, Engineering School, Applied Science. Workman with site plans and surveyors tripod.Kodakeducation, tertiary, latrobe university bendigo, eig school - ralph birrell collection. - construction of latrobe uni. c1966. bendigo institute of technology, engineering school, applied science. workman site plans surveyors tripod.

Jackie Kerin's (donor's) story. In 1973, I was in my late teens and while I’d moved to Sydney from Melbourne, to begin my first year of drama studies at the National Institute of Dramatic Art. My parents had moved to Lake Bunga, a few kilometers north of Lakes Entrance (Victoria). On my first holiday visit to Bunga, I called into the Jolly Jumbuck Country Craft Centre in Bairnsdale http://jumbukwool.com.au/history. I was entranced by the place and spent the following weeks learning to spin lumpy wool on an Ashford Wheel. By the end of the holidays, I had my own Ashford and it travelled with me back to Sydney. After graduation, I returned to Melbourne and the hippy “back to nature” movement was in full swing; there were many shops and galleries selling handmade woollen items and pottery etc. So I found an outlet for my pieces. Sometime in 1976-77, I met a spinner and weaver of Swiss origin (I think) – her name was Ingeborg Guber (not sure of the spelling). She had a small gallery/shop at Brighton Beach where she worked, with her pet duck for company. Ingeborg had an upright Philip Elford wheel; an Australian wheel crafted from Acacia melanoxylon (blackwood). I was smitten and ordered one. I have a memory of Philip driving to Hampton from Ballarat to make the delivery. I used this wheel for years but as time and enthusiasm for spinning waned, the wheel became a decorative item in the house. Then in the 90s, and with my drama training, I set myself up travelling to schools and festivals, museums and galleries as a storyteller. The spinning wheel had a new life accompanying me on my adventures. For many children, familiar with references to spinning in fairy tales, seeing the little Philip Elford upright was magical. The wheel was donated to the National Wool Museum in 2021.Vertical tripod leg spinning wheel. 6 spoke wheel with three bobbins. Inscription “Philip Elford Ballart” can be read in gold text stamped to the base of the wheel. Wording, stamped, gold. Philip / Elford / Ballartspinning wheel, textile production, hobby textiles, aciacia melanoxylon (blackwood)

This was the carrying case for the Cirkut Panoramic camera and tripod used by William Anderson who worked in Lorne in the late 1890’s to 1945A black leather rectangular case with purple velvet lining. It has three metal fasteners and a metal handle. Inside it is divided into three compartments.camera, carrying case, lorne, william anderson

Laminated photo of a M-29 81mm Mortar. Coloured photo with detailed weapon placed on concrete apron.. Black metal pipe on round base supported by tripod in copper metal.photograph, m29 81 mm mortar

Camera: Black & Silver, Metal & Plastic. Lens protruding from the front / Shutter button, counter & flash connection on top / Tripod connection on the bottom Brown leather case in the shape of the cameraBraun Nornberg / Paxette Electeamatic

Trig Point Big HillBlack & white copy of a photograph of an iron frame, which is shaped like a tripod. Known as a Trig Point - it marks the highest point on the hill. It has a metal disc on the top. Car in the foregroundnonestawell, triangulation pillar

Negretti and Zambra 1850-1980s were optical instrument makers and mathematical instrument makers based in London, England. The firm of Negretti and Zambra was established in 1850 by Henry Negretti and Joseph Zambra who had formed a partnership. Their skill was immediately apparent when exhibiting at the 1851 Great Exhibition at Hyde Park, they were the only English instrument makers to receive a prize medal for meteorological instruments, resulting in their appointment as instrument makers to the queen, Greenwich observatory, and the British Meteorological Society. In 1853, when the Crystal Palace was re-erected in Sydenham, Negretti and Zambra became the official photographers of the Crystal Palace Company, which allowed them to photograph the interior and grounds of the new building. The firm made use of this access to produce a number of stereographs. Between 1855 and 1857 Negretti and Zambra commissioned photographer Pierre Rossier to travel to China to document the Second Opium War. Although Rossier subsequently was unable to accompany to Anglo-French forces in that campaign, he nevertheless produced a number of stereographs and other photographs of China, Japan, the Philippines and Siam (now Thailand), which Negretti and Zambra published and that represented the first commercial photographs of those countries. In 1856 Negretti and Zambra sponsored a photographic expedition to Egypt, Nubia and Ethiopia conducted by Francis Firth. In 1864 Negretti and Zambra (themselves) photographed Shakespeare's House at Stratford on Avon. A sepia photograph was then pasted onto card 4" × 2.5". This was then presented to visitors to the Crystal Palace to enable them to compare it with the model erected by Mr E. T. Parr in the Centre Transept. The card itself is headed "Crystal Palace April 23rd 1864." That year they also published a book, titled A Treatise on Meteorological Instruments, (which was reprinted in 1995). Throughout World War One Negretti and Zambra were entirely engaged in the production of various instruments for the Ministry of Munitions. They developed many instruments for the Air Ministry including a mercury-in-steel distance thermometer for taking the oil and air temperatures in aircraft which was patented in 1920. In 1946 the company went private and in 1948 the company was made public, and by 1950 Negretti and Zambra had 821 employees in Britain. In order to increase production and to safeguard future development in 1964, they purchased a modern factory at Aylesbury for all their production. In 1981 Negretti and Zambra were taken over by a group of financial institutions in the form of Western Scientific Instruments and in 1985 the company was acquired by Meggitt Holdings.The subject compass is just one type of the many marine and scientific, optical items this company produced over it’s life time. Negretti and Zambra were prolific manufactures of types of items as well as being very prominent in photography pioneering new innervation's and sponsoring expeditions to little known countries to document peoples daily lives and culture through photography.Azimuth compass on tripod in a fitted wooden box with a round spirit level included, lid of box has three indented circles where the legs of the compass fit when it is set up for use. Stamped "C.M.O. 9" on with Maker Negretti & Zambra London.flagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, azimuth compass, nautical instrument, negretti & zambra london, navigational instrument, compass

Used for survery at the Ballarat School of Mines for Civil and Mining classes.A surveying level. Longitude and transverse bubbles, magnet, compass. External focussing. Twin vertical inclined hair lines. Four levelling screws. Objectove lens with dust shield. Fits tripod cat. no. 04132thodolite, surveying, ballarat school of mines, w.m. drummond, civil engineering, mining engineering, scientific instruments

Copper cylinder 330cm high,2 handles at base contains copper cone shape attached upside down Copper cup attached to cylinder top by a tripod. Heated by wood or gas fire underneath.no markings obvious

This plaque stand has been used for the opening of new buildings or newly established plaques, and was most recently used in the opening service of the Wellbeing Centre in 2024.Large stand used for revealing new plaques. Designed like a tripod, with three legs to stabilise the backboard. Deep red curtains attached via a rod, which can be moved to reveal the plaque with a drawstring.plaque stand, ceremony

This item belonged to Dr Horace Iles Holmes (1877-1959). He was born and educated in Tasmania and completed a medical degree at Melbourne University. He commenced a medical practice in Warrnambool in 1906 and was the Honorary Medical Officer at the Warrnambool Hospital and Warrnambool’s Health Officer. His practice was at ‘Ierne’ at the corner of Spence and Kepler Streets. Dr Holmes was an early member of the Royal Australian College of Surgeons and was prominent in Warrnambool community affairs (foundation President of the Warrnambool Rotary Club, a member of the local Masonic Lodge for over 50 years, a Warrnambool Hospital Committee member, a long-term Trustee of the Warrnambool Methodist Church and President of the Lyndoch Hostel for the Aged Committee). Dr Holmes also had many recreational interests, including fishing, bowls and golf. This item is of considerable interest as one coming from the collection of Horace Iles Holmes, a doctor who was prominently associated with the professional and community life of Warrnambool for well over 50 years..1 This is a cylindrical-shaped brown leather case with white stitching along the sides and at the ends. The top end has a leather lid attached to the body of the case with a metal pin. The leather attachment here is broken away. On the side of the case is a leather handle. The case is much scuffed. .2 This is a metal tripod with three legs and pointed ends for embedding into the ground area. The three legs sit on a rounded metal top with a screw for attachment to a camera. The metal top has white printing. The top part of the tripod is slightly rusted. ‘Normal Marque Deposee’warrnambool, dr horace holmes, photographic accessories, history of warrnambool

This is a WW1 stand for mounting a .303 rifle, to train soldiers in shooting.This device consists of two parts; 1. Top part has an adjustable 'arm' . At the end of each arm is a leather covered 'U' section. Under the arm is a large threaded rod and knurled knob, this is to adjust elevation. At the center of the arm is a pivot that can lock into position. This top section is mounted on a tripod, it can be removed. 2. This is a steel tripod made out of 'T' section steel. There are fixed cross braces about 40 cm fom bottom. The top has a tube section within which the upper arm mounts.Marked on one leg is "XXI". Believed to be from 21st Bn. AIF. on the top of that leg is a very small arrow head.ww1, training, .303 rifles

The Heliograph MkV is a fascinating piece of historical surveying and communications equipment. It was primarily used for visual signaling by reflecting sunlight with a mirror to send coded messages over long distances. This method was primarily useful in remote areas where other forms of communication were not available. The MkV model, specifically, was widely used by the British Army and other military forces from around 1906 until the mid 1960s. It remained in use with the Australian Army Survey Corps until the mid 1980s. The device typically included a 5 - inch mirror and was often mounted on a tripod for stability. Initially the instrument was used to communicate between survey stations using Morse code to coordinate their activities. Later when better forms of communication were available, they were used for precise angle alignment where the sunlight reflection from the mirror was targeted between the survey stations to give very accurate results. The MkV was relatively light weight and portable, making it ideal for use in the field. It could be setup and adjusted quickly. The heliograph had an adjustable mirror that could be tilted to reflect sunlight towards a distant receiver. Surveyors could align the mirror using a sighting device. Whilst it was primarily used by the Military it was also used in civil surveying particularly in the remote areas of Australia. The British Army Mark V version uses a flat round mirror with a small unsilvered spot in the centre. The sender aligned the heliograph to the target by looking at the reflected target in the mirror and moving their head until the target was hidden by the unsilvered spot. Keeping their head still, they then adjusted the aiming rod so its cross wires bisected the target, they then turned up the sighting vane, which covered the cross wires with a diagram of a cross, and aligned the mirror with the tangent and elevation screws, so the small shadow that was a reflection of the unsilvered spot hole was on the cross target. This indicated that the sunbeam was pointing at the target. If the sun was in front of the sender, its rays were reflected directly from this mirror to the receiving station. If the sun was behind the sender, the sighting rod was replaced by a second mirror, to capture the sunlight and direct it onto the main mirror to reflect it to the receiving station.. 1 Brish Army "Mance" Mk V A253 Heliograph has two 125mm diameter mirrors on a brass arm with targeting attachments. The Instrument is mounted on a three-legged tripod of brass and mahogany with spiked feet, approximately 1.2 metres high. The instrument was made by LUCO Art Metal Co Ltd, London in 1940. .2 A military green metal carrying safety storage case with khaki shoulder strap.A253 stamped on instrumentroyal australian survey corps, rasvy, fortuna, army survey regiment, army svy regt, asr

Black & white photo of two Australian soldiers wearing slouch hats behind a Vickers M6 gun on a large tripod with water container & ammunition boxes beside it. The small photo has been printed on larger photo paper.photography-photographs, military history-army, arms-ordnance, vickers

Theodolite with internal focussing. One plate bubble level. Three levelling screws. Engraved. "Crosshair" and stodia lines. Aladide levelling bubble with top mirror. Fully rotatable telescope with gunsight. Fits tripod Catalogue Number 4107.scientific instruments, theodolite, e.r. watts & son ltd

Surveying level - long bubble level on top. Magnet, compass under telescope. No crosshairs. External focussing. Four levelling screws. No transverse level. Housed in a polished timber storage box. Fits tripod Catalogue Number 429.scientific instruments, level, dumpy

The Sunbury War Memorial is sited in a grassed reserve at the intersection of Stawell and Macedon Streets in Sunbury. At its initial installation, the names of Sunbury ex-servicemen who had seen battle in World Wars 1 and 2 were listed on the four plaques. In later years the names of other servicemen who have fought in recent battles have been added to the memorial. On Anzac Day a service takes place at the memorial and is attended by many of the townspeople.The war memorial in Stawell Street is one of Sunbury's important heritage structures and commands an important position in the town.A black and white photograph with a cream border of a memorial set in an open area. The memorial has been set on a pedestal of three steps. a lamp supported by a metal tripod with four smaller lamps below the main one is on top of the memorial.

A display at the Wildflower Show.The photo shows a stage display with a tent, fireplace with billy hanging on a tripod and a dummy dressed as a camper. There is a man wearing jeans, a jumper, gum-boots and a beanie posing with the dummy. A large painting of rock banded peaks forms the backdrop of the stage. "85 9 27" photo date on lower right side of photo.events, wildflower show

A spherometer is an instrument for the precise measurement of the radius of curvature of a sphere or a curved surface. Originally, these instruments were primarily used by opticians to measure the curvature of the surface of a lens. A fixed-frame tripod with adjustable central contact screw, equipped with micrometer scale. Brass construction with steel contact points. Designed for measuring curvature of lenses. Stored in a polished timber box. Made specially for Silberberg and Co. Ltd. Melbournescientific instrument, spherometer, h.b. silberberg & co ltd

Filmosound GB Bell & Howell film projector c1950, wood and masonite, two tone grey casing, metal projector inside, 16mm, 110v, 10amp, 2 reels. Tripod stand, metal grey with wing nut and screw adjustment.7 rar, projector, filmosound, nui dat, infantry

Photographs of a Bren gun mounted on a tripod for anti aircraft use. The location is unknown. The first photograph shows an Australian Army Sergeant standing beside the Bren gun. The second photograph shows a group of seven Australian Army soldiers beside the Bren gun.

Used for surveying classes at the Ballarat School of Mines.Telescope with cross hairs and stoidia wites. Internal focussing. Vertical tilt adjusted with vernier mocrometer screw mirror lid longitudinal bubble level. Pea bubble level on plate. Housed in wooden storage carry box. Fits tripod cat. no. 4118Serial number 67543 On box lid in white paing "L 6". In yellow paing "59". Inside box lid - Manufacturers label; grades table label, calibration label reading "instrument No 67 543, date 13.5.50" (ink faded) constant: +0.19 ft"dumpy, level, surveying, scientific instrument, e.r. watts & son ltd, ballarat school of mines

Rocket equipment which has been used in various lifeboat and rocket stations on the Victorian Coast. It is unclear if this is the original rocket equipment from Port Campbell. This equipment, if not original has been used in rescue operations and is identical to the equipment that has been in use at Port Campbell from C.1890 onwards.Metal, brass and timber tripod structure with a channel or trough to support the rocket. It has a pendulum and dial to measure the height trajectory. Very long wooden box with hinged lid painted a green-grey colour with four brass hinges and two rusted metal hooks.

The Plane Table Alidade was used as the sighting Instrument in the production of historical manual hand drawn maps. A Plane Table Board mounted on a tripod is levelled and the Alidade is placed on the table with the vanes perpendicular to the it. Each sighting vane has a central thread lined up on the target and the angle to that target point is then drawn on the map sheet using the beveled fiducial edge. Plane Table Surveying is used as a quick method where less accuracy is required or needed. Plane table Surveying is a relatively portable and inexpensive method and was used extensively before the advent of sophisticated surveying instruments. The photo at 6489.2 is an Australian Army Survey Corps Party using a Plane Table Alidade in Syria during WWII. See also item 6580 which is the Plane Table with tripod legs that was used with the Alidade.Two Plane Table sighting instruments (Alidade) used for historical manual map making housed in wooden transit boxes. A brass instrument with folding sights at each end and a beveled fiducial edge in one edge. The front sight is the object vane and the rear sight is the sight vane. There is a sliding arm attached to the base to draw parallel lines to the fiducial edge. Very slight differences in model between these two instruments.First Instrument, "ER Watts and Son, London, 1938, MkII, Box Label 423. Second Instrument - R. E-Co, Mk.II, stamped E686, Box Label 686.royal australian survey corps, rasvy, fortuna, army survey regiment, army svy regt, asr