Cpl. Ronald Warren Ellis, EM (VX502517) was born in Brunswick in 1927. His family moved to Lara when he was young, and his schooling took place at the Lara State School. After finishing his education, Ron took up employment at Sims Coopers in Corio. Ron was enlisted in the second AIF at Melbourne, and posted to the 3rd Recruit Training Battalion at Greta west of Newcastle, NSW. After 3 months training, he was sent to the Service Corps Training Centre for driver and maintenance training in Ingleburn, south of Sydney. When this course was completed, Ron was posted to the Australian Army Service Corps as a driver motor vehicle with the 2nd AIF. Rons service with the AIF lasted 425 days, when he was then transferred to the Interim Army for a further 309 days. The duration of his service was in NSW. Ron was discharged from the Army in Melbourne on the 4th of May 1948. In 1957, Ron enlisted in the CMF and served with 22nd Construction Squadron for 17 years with the last 5 as a Corporal, and was awarded the Efficiency Medal for long service and good conduct.Brown canvas booklet that is folded into three. Licence gives details of Army number, name, rank and type of vehicle that is able to be driven. Licence has been issued to Private Ronald Warren Ellis on 24/01/1948. No. 258778 Army No. V?SOL517 Rank: Private Name in full: Ellis, Ronald Warren Unit: Transferred to (unit): Having passed the prescribed tests ... authorised to drive... types of ... vehicles within the Commonwealth of Australia and Territories. Signature of Driver: drivers licence, australian military forces, army, private, ellis, ww2, wwii, world war two, second world war

This photo is from 1917 and is of Private Harry Groves (standing) with his cousin Arthur Whitter (seated). Private Groves was the Uncle of Ron Ellis, who was a Lara Sub-Branch member. Cpl. Ronald Warren Ellis, EM (VX502517) was born in Brunswick in 1927. His family moved to Lara when he was young, and his schooling took place at the Lara State School. After finishing his education, Ron took up employment at Sims Coopers in Corio. Ron was enlisted in the second AIF at Melbourne, and posted to the 3rd Recruit Training Battalion at Greta west of Newcastle, NSW. After 3 months training, he was sent to the Service Corps Training Centre for driver and maintenance training in Ingleburn, south of Sydney. When this course was completed, Ron was posted to the Australian Army Service Corps as a driver motor vehicle with the 2nd AIF. Rons service with the AIF lasted 425 days, when he was then transferred to the Interim Army for a further 309 days. The duration of his service was in NSW. Ron was discharged from the Army in Melbourne on the 4th of May 1948. In 1957, Ron enlisted in the CMF and served with 22nd Construction Squadron for 17 years with the last 5 as a Corporal, and was awarded the Efficiency Medal for long service and good conduct. This photo represents the connection that Lara RSL members and their family members have to the conflicts that Australia has been involved in over time. Photograph of Harry Grove (standing) with his cousin Arthur Witter (seated) - France 1917. The black and white photo is framed within a wooden frame, and above it is a piece of paper with details about the photo written in red texta. The photo is black and white, and in the bottom right corner in pencil is written: Sincerely Yours, Arthur. The remainder of the text extends under the frame, but looks as though it says: Arthur, France. world war 1, ww1, wwi, photo, family, private, corporal

Item re R T PHILLIPS VX113093, refer Cat No 3239P for his service details.Australian Army Driving Licence for Cpl R T PHILLIPS VX113093. Folds three ways. Left column shows vehicle types that PHILLIPS was authorised to drive. Column three shows authorised dates 10 Aug 1942 - 14 Oct 1943. Column six shows signature of CO. Brown buckram exterior."Licence No 29575"documents - licences/military, drivers

Black & white photo in brown wooden frame with gold inner edge & glass front, white backing with wire hanging strap. Photo of 300th Co Army Service Corps (late 9th Australian Company). All personnel in full uniform with vehicles in background, Australian flag in centre.Bottom of photo: “300th Army Service Corps (late 9th Australian ASC). DSCM Mobilized for European War. June 1915”photography-photographs, frame accessories, 300th, passchendaele barracks trust

Benjamin Thomas Roy Chadd No's 10594, VX20311, 1st and 2nd AIF. Refer 2039 for complete service history also 2034P. Photo taken possibly between WW1 and WW2. Photograph, framed. Re Lt. Col. B. T. R. CHADD. Timber frame mid brown colour. Black and white photograph of eight lighthorse officers, some have medal ribbons on left of chest. One vehicle and row of trees in background. Group full length portrait. Dark green cardboard surround to photograph.On white label with frame "Lt Col B.T.R. CHADD/donated by Mrs B. CAHILL"photography- photographs, frame accessories, military history- army

Items belonging to Thomas Henry ISER. He enlisted initialy on 24.7.1939 in the CMF No V34933 with the 17th MG Regt age 21 years. Promoted to Lieut 20.12.1940, transfers to ARMD Corp 1.5.1941. He begins full time CMF on 29.7.1941, promoted T/Capt 25.9.1941, transfers to the 2nd AIF 15.8.1942 as No VX102660, transfers to the 2/10th ARMD Regt 20.7.1943, promoted Capt 6.2.1944, transfers to the 24th Inf Batt on 29.9.1944, embarks for Bougainville 5.1.1945 and returns home on 26.10.1945, appointment terminated in the AIF on 12.11.1945..1) Army Driver' s Licence, Brown buckram cover, No 128377 issued to ISER, Thomas Henry Army No VX102660. .2) Instructions about accidents involving military vehicles..2) Signed "N E BACON Lieut" licence, drivers military

In November 2001 Australian SAS troops joined the war in Afghanistan under the operation name "Operation Slipper." Australia's military contribution to the International Security Assistance Force mission in Afghanistan ended in 2014, making Operation Slipper Australia's longest running operation. According to the Department of Defence, "the ribbon is khaki representing the dominant ground colour of the terrain, edged with light blue and white stripes representing the sky above the mountains and the snow on the mountain peaks with central stripes of purple and red representing the ADF and the conflict in Afghanistan." This commemorative medallion features the Afghanistan Medal ribbon colours encircling the figure of an ADF member holding a weapon. The image is in relief. The reverse features a number of service personnel pictured in front of a vehicle, encircled by the motif of the Australian national flag.commemoration, operation slipper, afghanistan, australian army, middle east, international security assistance force

Identification plate is for the Royal Australian Mechanical and Electrical engineers (RAME), 3rd Military District, vehicle number 743.Vehicle identification plate used by the Australian Army.Small square shaped steel metal plate. Khaki coloured paint on rear face. Blue, yelow and red horizontal painted stripes on the front face. White coloured numbers with a narrow horizontal white line painted on front face. Small hole drilled through the plate on the top.Horizontal blue, yelow and red horizontal stripes. Number 3 on top of a narrow horizontal white line with the numbers 743 underneath.vehicle, identification, plate, rame, 3rd military district

Vehicle identification plate used by Australian Army HQ post WWIIAuatralian Army vehicle identification plate used post WWIISmall square shaped painted steel vehicicle identification plate. Painted khaki on the rear and front edges. Red, blue and red horizontal painted stripes on front face decal. Crossed swords, khaki painted kangaroo and Queens crown painted on front face decal.Red, blue and red horizontal painted stripes on front face. Crossed swords, khaki painted kangaroo and Queens crown painted on front face decal.vehicle, identification, plate, australian army, army headquarters

The Pay Book and the Driving Licence belong to NX 200845 A E Beale who served during WW2 with the AIF 101 and 114 Australia General Hospitals.The document are the originals belonging to NX 200845 A E Beale.Soldier's Pay Book Form WF 5(a) Revised July, 1944 - Oblong yellow covered book with grey pages, Pay Book Number C523278. AMF Army Driving Licence AAF G11, Revised March,1943 - Oblong brown covered book, folds into three, a white page pasted to the inside cover with Pte Beal's authority to drive military vehicles.Pay Book and Driving Licence - NX 200845 Pte Alan Edgar Beale.aif, ww2 nx 200845 pte a e beale, driving licence, paybook, 101 agh, 114 agh

Hard cover. A compact directory of major battle tanks and combat vehicles used by the world's armies. Includes photographs and specifications.ISBN 0 7018 1439 Xmilitary history, tanks, armour, armoured fighting vehicles, ray bonds, combat vehicles, military history, tanks, armour, armoured fighting vehicles, ray bonds, combat vehicles

An illustrated directory of major battle tanks used by the world's armies in World War II. Included photographs, illustrations and specifications.ISBN 0 7018 1488 8world war 2, military history, tanks, armoured vehicles, christopher f foss, world war 2, military history, tanks, armoured vehicles, christopher f foss

History of the AFV School, Editors - Major John E, Baines, RFD Major Peter G. Branagan, OAM Mr David A. Finlayson army, history, training, tanks, armoured fighting vehicles, afv school, school of armour, puckapunyal, baines, branagan, finlayson, army, history, training, tanks, armoured fighting vehicles, afv school, school of armour, puckapunyal, baines, branagan, finlayson

The lathe-making business incorporated in 1902 as Drummond Bros Ltd originated in the fertile mind of Mr Arthur Drummond, said to have been living at that time at Pinks Hill, on the southern edge of Broad Street Common, west of Guildford. Mr Drummond, whose accomplishments included several pictures hung in the Royal Academy, was unable to find a lathe suitable for use in model engineering. In 1896 he designed for himself a ‘small centre lathe … which had a compound slide rest with feed-screws and adjustable slides’. He also designed and built ‘lathes of 4.5 inch and 5 inch centre height, which had beds of a special form whereby the use of a gap piece was eliminated but the advantages of a gap-bed lathe were retained’. Assisted by his brother, Mr Frank Drummond, who had served an apprenticeship to an engineering firm at Tunbridge Wells, the first lathes were made in a workshop adjoining Arthur Drummond’s house. The demand that speedily built up led to the decision to form a company and manufacture the lathes for sale commercially. Land was acquired nearby, at Rydes Hill, and the first factory built. The enterprise was a success, and the company quickly established ‘a high reputation in this country and abroad for multi-tool and copying lathes, and gear-cutting machines’. Other lathes were added to the range, including the first of the ’round bed’ machines for which the firm became widely known. A Drummond 3.5 inch lathe was among the equipment of Captain Scott’s 1912 expedition to the South Pole, and large numbers of 3.5 inch and 4 inch designs were exported to Australia, Canada and India. By the outbreak of war in 1914, 5 inch, 6 inch and 7 inch screw cutting lathes, arranged for power drive, were on sale. Large orders were received from the government for 3.5 inch lathes, for use in destroyers and submarines, and 5 inch lathes for the mechanised section of the Army Service Corps. The latter were used in mobile workshops. The factory worked night and day to supply the forces’ needs, until production was disrupted by a fire which destroyed a large part of the works in May 1915. As soon as rebuilding was complete work restarted. At the end of the war the entire production was being taken by the Government departments, a special feature being a precision screw lathe, bought by the Ministry of Munitions in 1918. Between the wars Drummond Bros Ltd introduced new machines for the motor vehicle, and later the aircraft industry, and the works were extended on many occasions to fulfill the increasing orders. The Maxicut multi-tool lathe (1925), designed for high-production turning operations, was one of the first machines of this type to be built in England. It was followed (1928) by an hydraulic version for turning gear blanks, and similar work. Further developments provided machines which, during the Second World War, turned all the crankshafts and propeller shafts for Bristol engines. Others, ordered by the Ministry of Supply were employed in turning shells, and many other specific needs of vehicle and aircraft manufacture were catered for by new types of Drummond lathes. Production of the small centre lathes ceased during the war when the company needed to concentrate on building multi-tool lathes and gear shapers. After the war a completely new Maxicut range was introduced, replacing the older versions, and fully automatic. The types were continually developed, and new versions manufactured until the end of the company’s life in 1980. The disappearance from the scene of Mr Arthur Drummond in 1946, and the end of the company’s autonomous existence in 1953 when the company was acquired by William Asquith Ltd, which was in turn bought by Staveley in 1966, meant that the factory at Rydes Hill became one – albeit very effective – part of a large national engineering company. Achievements at the Guildford works during its last years included the development of automated Maxicut gear-shapers in what was ‘probably the most fully automated gear shop in the country’, while a machine from Guildford was sent to the Osaka Fair in 1962. In 1963 an agreement was signed with Hindustan Machine Tools for the manufacture of Maxicut gear-shapers in state owned factories in Bangalore and Chandigarh. During 1963 the two largest multi-tool lathes ever made in the UK were installed in Ambrose Shardlow’s works in Sheffield for handling cranks up to 14 foot long. In 1976 Drummond lathes were included in Staveley’s £14,000,000 installation in Moscow of an automated production line for Zil motor cars. Up to the end invention continued at Guildford: a new Drummond Multi-turn memory-controlled machine was shown at the International Machine Tool Exhibition in 1977. This could not save the works from the pressures of the late 1970s, and Staveley Industries closed its Guildford site in 1980.An early example of a lathe that was designed primarily for the hobbyist model maker. It is in good condition and sought today by collectors as many of it's attributes were innovative at the time and lead to further development and incorporation of some of its features into more industrial models of production machinery. Lathe, round bed, treadle powered lathe, Drummond Type A, Serial number and maker's inscription. 1920-1923, Made by Drummond Brothers in Guildford, Surrey, England. Lathe is complete with Chuck, Tool post and Tail Stock in situ (30 extra parts)"MADE BY DRUMMOND BROTHERS LIMITED - PATENT TEES - RYDE'S HILL n GUILDFORD SURREY", "Serial Number 01470," "L44" or "L45 " flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, lathe 1920-1923, round bed lathe, treadle lathe, drummond type a, guildford surrey, drummond brothers guildford surrey england, tread'e