Showing 349 items
matching wood and steel
-
Mont De Lancey
Tool - Saw, Simond Steel and saw Co, Crosscut Saw, Unknown
Used in the 19th century.A forged steel narrow bladed double Peg and Rake toothed crosscut saw with no handles. It was used to saw rough wood or cross cut wood against the grain in the late 19th Century.Stamped on the saw: made of Simond Steel, Trade mark Reg. Warranted The Simond Saw Est 1832, Simond Steel & Saw co USA. Crescent Ground Steel Mill, Lockport New York. Factories Fitchburg Mass, Montreal Quebec No 325hand tools, woodworking tools, carpentry tools, steel, hand saws, saws, cutting tools, crosscut saws -
Flagstaff Hill Maritime Museum and Village
Gouge
John Heath tool boxGouge with cast steel marked on blade. Handle is wood tapered octagonal. Blade is a regular sweep.104mmL x 14mmW flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Bendigo Historical Society Inc.
Negative - TOM PATULLO COLLECTION: MINING SITE
Negative print.Mining Site. Steel poppet legs, man on walk platform, wood stack,boiler house, large shed.cottage, miners, mining site., mining site. -
Kiewa Valley Historical Society
Plane Wood, 1890 -1900
J.E. Bleckmann were German Blade makers, registry shows Bleckmann (1899, No. 37190):J.E.Bleckmann, Solingen, registry class 9b). As well as blades for wood working tools they were also sword makers (used in American Civil War), Bayonet makers 1871-1918 and also pocket cutlery (pocket knives) as per advertisement 1907.This wood plane holds historical importance as carpentry tools such as this would have been used in the construction of local homes, outbuildings, furniture. It represents an era before power tools. Investigation is ongoing as to ownership and specific use in the area. Hand made wooden hand plane with metal blade. Carpentry tool from 19th century1/38 / 34 mm stamped into wood on front edge of plane. Metal Blade inscribed "J.E. BLECKMANN/ WARRANTED / CAST STEEL / SOLINGEN/GERMANY"tool, blade makers, hand plane, woodworking. -
Kiewa Valley Historical Society
Woodworking Tool - Shaping Planes - Set of 5
Very old. Beech is the best wood for moulding planes since the early 1700s when other woods were passed over in preference for the straight-grained non-problematic beech wood. The blades are made of steel.Used by carpenters and / or cabinet makers in the Kiewa Valley.Shaping wooden (possibly beech or maple wood) planes bundled up. Each makes a different shape eg. nose, tail, concave. Ref. Pages 20 and 21 Tools For All Trades Catalogue.wooden planes, woodworking, shaping plane -
Kiewa Valley Historical Society
Adze
Axes and Adze are hand-held tool used for shaping and carving wood. Axes are designed for chopping and cutting, while adzes are designed for smoothing and shaping. Both tools have a similar shape and consist of a head attached to a handle. An adze is an ancient and versatile cutting tool similar to an axe but with the cutting edge perpendicular to the handle rather than parallel.Used by woodworkers in the Kiewa ValleyA cast steel tool similar to an axe, with an arched blade at right angles to the handle, used for cutting or shaping large pieces of wood.adze, hand tool for woodwork, axe -
Flagstaff Hill Maritime Museum and Village
Gouge
John Heath tool boxGouge with cast steel marked on blade. Handle is wood octagonal and badly damaged. Blade is a middle sweep.114mmL x 23mmWflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Flagstaff Hill Maritime Museum and Village
Gouge
John Heath tool boxGouge with cast steel marked on blade. Handle is wood tapered octagonal. Blade is a regular sweep. John Heath tool box flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, gouge -
Tennis Australia
Racquet, Circa 1965
A Dayton badminton racquet, with steel frame and strings, and fine grooved wooden handle. Materials: Metal, Paint, String, Wood, Lacquertennis -
Hume City Civic Collection
Paper Roll Holder
This paper roll holder would have been used in a retail premises. Large brown paper rolls were able to be cut to any length for wrapping goods.Two wooden bevelled pieces, narrow piece on top wider piece on bottom with steel support ends and moveable centre piece screwed to wood pieces. Steel ends have "U" shaped holder in inside at centre.Steel ends have two raised diamond patterns. "24in CLARENCE 24in"shops, george evans collection -
Lara RSL Sub Branch
French Gras Bayonet, 1879
French Gras Bayonet 1879 Length 66cm in Scabbard Width Hilt 10cm Materials Steel Blade and scabbard, handle wood and brassSerial No .41550 on Blade and Scabbard Inscription on Blade Mre d Armes de Etienne aout 1879 (Maufactured at St Etienne August 1879)bayonet gras french -
Australian Gliding Museum
Machine - Glider – Sailplane, 1953
The Schneider ES50 Club was built in 1953 and is the only one of its type. It was designed by Schneider to comply with specifications laid down by the Gliding Federation of Australia for a basic two seat training glider*. It was first flown on 10 May 1953 and delivered to the Renmark Gliding Club. The log book shows that it later passed to other gliding clubs, namely Millicent Gliding Club, Corangamite Soaring Club, Sydney Technical College Gliding Club. Overall, as at September 1967, the glider had logged over 5000 flights and a total airtime of 388 hours. The Museum volunteers have partly refurbished the ES50 to static display standard. [*Plans were also prepared for a single seat version which never eventuated] This glider is one of Edmund Schneider Pty Ltd earliest Australian designs. However, it was a later Schneider design, the ES 52 Kookaburra, which was accepted by many Australian gliding clubs for filling their need for a basic two seat training glider in the 1950s and 1960s. This is a two seat high wing aircraft of mainly wood and fabric construction. The cockpit area of the fuselage is fabric over tubular steel framing. Given serial number 3 by manufacturer and registered as VH-GHPaustralian gliding, glider, sailplane, schneider, es50, renmark gliding club, millicent gliding club, corangamite soaring club, sydney technical college gliding club -
8th/13th Victorian Mounted Rifles Regimental Collection
Weapon - Bayonet 1907 pattern
This pattern bayonet, which affixed to a .303 Lee Enfield rifle was standard issue to Australian forces in World War 1 ( 1914 - 1918 ), World War 2 ( 1939 - 1945 ) and the Korean War ( 1950 - 1953 ).Part of a collection of edged weapons relevant to Victorian Colonial and Australian Military forces.British pattern 1907 bayonet, with wood hand grips blade 430mm long, with leather scabbard with steel fittings and leather bayonet frog.ON handle " A- 93061 " On blade " 1 - 1922 Lithgow "wwi, wwii, korea, world war one, world war two, lee enfield -
Mont De Lancey
Tool - Hoe, Unknown
Used in the 19th Century A forged steel curved and straight blade headed hoe with a long handmade handle. It was used for chopping into the ground in the late 19th century.agricultural tools, hoes, gardening tools, gardening hoes, steel, wood -
Australian Gliding Museum
Machine - Glider – Sailplane, 1952-1953
This aircraft, the first glider built by Schneiders after they immigrated to Australia, was test flown on 3 January 1953 by Dave Darbyshire and Owen Lewis. It is the only machine of its type. It is essentially a Grunau Baby 2B with a Perspex enclosed cockpit, wing airbrakes and a landing wheel. However, the wing design came from an existing Grunau 3 type that was being built in Germany. The glider has given extensive service for a number of owners – including the Gliding Club of Victoria, Sunraysia Gliding Club, Millicent Gliding Club, Max Bugler of Morwell and Garth Hudson of Brighton in Victoria. Prior to being donated to the Australian Gliding Museum in January 2001 the glider had logged over 2200 hours flying time from over 9000 flights. The glider is an improved Grunau Baby design that Edmund Schneider built after coming to Australia.Single seat glider of wood and fabric construction, with steel wing struts. Currently painted crème with yellow details. Underside of fuselage is painted orange.australian gliding, grunau, grunau baby, schneider, gliding club of victoria, sunraysia gliding club, millicent gliding club, darbyshire, lewis, bugler, hudson -
Stawell Historical Society Inc
Photograph - Family Home, "Burnside" Stawell West
Huttley - MartinB/W: Landscape: Steel roof, 2 chimneys, weatherboard. Fence wood uprights, wire - wooden pailing gate. Garden front to back"Burnside" Stawell West Family Homehuttley, martin -
Tennis Australia
Racquet, Circa 1965
A Dayton badminton racquet, with steel frame and nylon strings, and fine grooved wooden handle. Materials: Metal, Paint, Wood, Lacquer, Nylon, Inktennis -
Kiewa Valley Historical Society
Skis, Boots, Stocks
Hickory wood is hard and heavy. Owned and used by Wally Deans.Used by SECV employee, Wally Deans who worked on the Kiewa Hydro Electric Scheme.Wooden skis made of hickory wood with metal binding and leather straps. Cane stocks with wide baskets. Ski boots are black, lace up with a steel plate screwed onto the front of the sole. The boots are in a steel hanging device for storage and transportation. Skis: "S.E.C. -3" inscribed on side. "66 / Hickory / 1742" on front of ski. Binding: 'Northland'. "Kanadar". Steel Carrier: "Tyrol / Can.Pat.1962 / U.S.Pat. 3074085 / Made in Canada"wally deans, ski equipment, skis, ski boots, ski stocks -
4th/19th Prince of Wales's Light Horse Regiment Unit History Room
Weapon - Bayonet, Wilkinson, Bayonet, Lee-Metford MK I Type 2, October 1897
Issued to 2nd Battallion Scottish Rifles "Cameronians" for Rifle no 823Steel bayonet, 28 cm blade, 11 cm handle, wood hand grips secured by brass fasteners, fitted for fixing to Lee-Metford rifle 10-97, Wilkinson London, Govt broad arrows, inspectors' stamps, bayonet, edged weapons, lee-metford rifle, wilkinson -
Federation University Art Collection
Sculpture, John Abery, 'Titanic' by John Abery, 2010
John ABERY Australian Artist and Sculptor John Abery works in a range of mediums including metal (bronze and steel), fiberglass, stone and wood.Laminated Pinus radiata and steelsculpture, john abery -
Mont De Lancey
Tool - Saw, Crosscut Saw, Unknown
A forged steel fine tooth crosscut saw with no handles. There are four rivet bolts and two round handle holders at each end of the saw. It was used to saw rough wood or cross cut wood against the grain in the late 19th Century.hand tools, woodworking tools, carpentry tools, steel, hand saws, saws, cutting tools, crosscut saws -
Clunes Museum
Plant specimen - WOODEN BLOCK
Block of wood (hemlock), the top half is "dressed" to show how timber is prepared. Typically, the flitch beam is made up of a vertical steel plate sandwiched between two wood beams, the three layers being held together with bolts. Typed onto cardboard pinned onto wooden block; Hemlock Bought in flitches Milled Clunes Sawmills Used for building finisheshemlock, clunes sawmills, flitch, sample -
Ballarat Tramway Museum
Functional object - Trolley Pole Signal Skate or contactor, The Forest City Electric Co. Limited England, 1930s
Used by the Forrest City Signal system to initiate or cancel a signal indication. The trolley wheel would make contact with the steel strips which would send an electrical impulse to the control box that either would enable the signal to be shown or cancelled. There was one on the trolley wire at either end of the section. See reference for further details.Demonstrates part of the Forest City Signal system.Signal contactor mechanism comprising two brass ears, a section of copper trolley wire, two steel strips assembled onto a section of wood fitted with steel covers where the ears are fitted through. Item refurbished for display purposes by Depot staff 2023.forest city signals, tramways, overhead -
Kiewa Valley Historical Society
Dray Brake Band, Horse Equipment
Drays were used to transport heavy materials such as farm products, building supplies, food. They were pulled by horses or bullocks. Drays were important for transportation in the Kiewa Valley.Made of timber and steel. The piece of wood contacts the axle hub to brake the dray. Part of a brake for a dray. It is missing the actuator that is needed for tightening the band to operate as a brake.drays, horses, bullocks -
Whitehorse Historical Society Inc.
Functional object - Barrow
Hand Barrow. Appears to be handmade and it was used to transport products around the pottery.The wheels are made of cast iron; it has a steel frame with springs and the sides are made of wood.ceramics, terracotta -
Kiewa Valley Historical Society
Sewing Machine - Singer
This sewing machine was bought by Alex Craig's dad in 1942 for his wife whom he married in 1943. Alex's grandmother used it in 1942. It still works (2013).Historical: Type of sewing machine used by S.E.C.V. wives living in Mt Beauty during the 1940's, 1950's and 1960's. Ladies made the family's clothes and sewed for the Annual Church and School fetes. eg. children's clothes and dolls' clothes. They bought dozens of dolls and made 'fairy' dresses for them using coloured netting.Singer sewing machine - brown wood lid & base. Handle on top of inside of lid as is the wooden bench that clips on to the side of the machine and also the steel knee lever that fits into the front of the machine. Black steel machine with silver fittings. Brown and white electric cord plugged in. "Singer" on front centre of lid. On machine - "Singer" above light. "The Singer manufacturing Co. / Manufactured in Great Britain" top of machine. "Singer" on front side of machine. Front - Gold plate - "The Singer Manfg. Co. / Trade Mark." Decoration on machine base and silver end.singer manufacturing co.. sewing. fetes. clothes. domestic. -
Mission to Seafarers Victoria
Plaque - Memorial Plaque, 1981
The plaque accompanying the stained glass window by Gerry Cummins was dedicated in 1981 to the men who gave their lives during the World War II period in the merchant and navy services.The chapel originally designed as a Memorial to the Great War 1914-18 continues to be a place of commemoration for both merchant and naval services of WW2 and other conflicts.Small rectangular plaque made of steel mounted on wood. The plaque features helm representing Merchant seamen and an anchor with a crown on top representing the Navy. Both are gold plated. To the glory of God and In memory of those who went down to the sea in ships 1939-1945 24 Dec, 1981.second world war, world war two, navy, merchant, plaque, 1981, ww2, merchant navy -
Kiewa Valley Historical Society
Miners' Pick Axe Head
Miners used pickaxes to break up rock and ore, making it easier to extract valuable minerals. The pointed end of the pickaxe was used to chip away at rock. The flat end was used to strike the rock for breaking it apart.Used in the Kiewa Valley by miners searching for gold.Cast steel 14 inches long with a sharp pointed end and a small flat end. There is a space for the handle which is missing and may have been made from wood.mining, miners' pick axe -
Upper Yarra Museum
Mallet, Wooden
A wooden Mallet could be found in most homes, and nearly all tradesmans tool box or bag, its most common use was working with wooden handled wood Chisels, because they did not damage the end of the chisel like a steel headed hammer,also they were used to fit joints of wood together as they would not damage the timber like steel hammers......Wooden mallets were also used by stone masons back to the time of the pyramids, but they were usually shaped differentlyWooden Mallet A handmade wooden mallet with a handle with a rectangular head. Carved ET on sidewood, mallet, tradesman, carpenter, cabinet maker -
Geelong RSL Sub Branch
Machete, There are no makers names, Mid 20th Century
These machete's were issued to military personnel posted in jungle like conditions.The machete would have been used by military personnel during WW2 and during the 1950s.Steel blade machete with wooden double sided handle. The handle is attached to the wood with four steel rods. There is an olive green scabbard made of cotton material oil impregnated. The scabbard has a pocket on the front to hold a sharpening stone and has steel on the top opening to keep the opening firm, there is a steel catch for attachment to webbing and a cloth loop with press stud to hold the handle of the machete in place when in the scabbard. There is a cotton fabric loop through the handle.On the handle of the machete MA67. The item number on the scabbard is not readable.army, military, machete.