Showing 946 items
matching angles
-
Sunbury Family History and Heritage Society Inc.
Photograph, Rosa McCall, St. Andrews Uniting Church, April 2017
In the foreground of this photograph are the original wrought iron gates which served as the entrance to St. Andrews Uniting Church, formerly St.Andrews Presbyterian Church. They were erected there in 1922 and were made at H.V.McKay's Sunshine Harvester foundry, at Sunshine. H.V McKay was a member of the Presbyterian Church in Sunbury. Originally the gates opened onto Stawell Street, which ran at an angle between O'Shanassy and Barkly Streets. Apart from a small area leading to the Memorial Hall the rest of Stawell Street has been incorporated in the Village Green in Sunbury.The gates fell into disrepair but in 2000 they were restored and erected on their original site. A coloured photograph of white painted wrought iron double gates with two smaller gates on either side and supported by stone pillars. A red brick church is in the background beyond a grassed area. st. andrews uniting church, h.v.mckay, stawell street, churches, st.andrews presbyterian church, sunbury -
Warrnambool and District Historical Society Inc.
Wood Plane, Late 19th century
This tool is part of a large collection of vintage tools and they are believed to have belonged to a Warrnambool businessman, Henry Phillips. English-born carpenter, Henry Phillips (1821-1896), with his wife, Elizabeth, came to Australia in 1849 and lived in Port Fairy for some time. In 1865 he formed a partnership with Christopher Beattie and established the undertaking firm of Beattie and Phillips. The funeral business continued on after the deaths of the two founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved with the management of the Mechanics’ Institute.This tool is of interest as an example of a vintage tool and also as a memento of the 19th century Warrnambool businessman, Henry Phillips.This is a large rectangular-shaped wooden plane tool. It has a curved wooden handle with a flattened top and this is inserted into the top of the body of the tool. The middle section of the top of the tool had been gouged out and a metal blade inserted at an angle and this blade partly protrudes at the base to make a planing tool. The metal blade is held in place by a covering piece of wood and a metal screw holds both the inserted wood and the blade in place.vintage tools, henry phillips,, history of warrnambool -
Frankston RSL Sub Branch
Locker, Kit
Locker of wooden construction that has apparently been made to store and carry a serviceman's kit. The locker is stained and polished, has a hinging lid and has two handles for carrying. The lid is attached by three metal hinges and the lid has a hasp for padlocking. The locker has an internal removable shelf for additional storage space (for small items). The locker has external steel strips at the top surface and steel angles at the corners for protection.The name "J. KITT V50015" is stamped into the wood at the inside of the locker. -
Flagstaff Hill Maritime Museum and Village
Instrument - Set Square, 1930-1955's
This set square was used in the planning and making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. James Bernard Williams was known as Jim Williams, born 1888 at The Forth and died 1959 in Warrnambool. He was a passionate ship model builder. Jim left school at the age of 14 years to work at the Don Store in Ulverstone, Tasmania. He played piano at the silent pictures. He enlisted and fought in France along with his two brothers and was wounded there. On return to Tasmania he found it difficult to get employment. He moved to Warrnambool and worked in the menswear department at Cramond & Dickson clothing store, corner of Timor and Liebig streets, until the Depression, when he lost his job. After some time unemployed and working part time until 1932, Jim was employed at Fletcher Jones Menswear in Warrnambool. In 1957 Fletcher Jones invited Jim to write out a list of the most interesting details of the ship model Sovereign of the Seas, with the view of displaying the model and the information for a short time in the factory and then move it to the display window of the Fletcher Jones shop in Warrnambool. Jim worked there for 27 years until just before he died in 1959. His Retirement Speech letter and a Staff Photo from Fletcher Jones are included with the donation. ABOUT JIM’S MODEL MAKING For many years Jim worked on his model ships, including The Endeavour and The Sovereign of the Seas. He had a table set up in a bay window and worked on them on and off using a jeweller's eye glass on the finer pieces. He was a real perfectionist and would re-carve pieces many times until he was happy with the results. This set square is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This set square was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Set square; thin, flat metal blade with rounded corners set at a right-angle into timber stock using three rivets, each with a diamond shaped surround. There is a remnant of red paint on the timber and signs that the set square has been well used. This set square is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ship model sovereign of the seas, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, measuring instrument, technical drawing instrument, set square, carpenter’s square, drawing instrument, drawing tool, technical drawing tool, sovereign of the sea, ship model, hobby, ship model tool, english war ship -
Flagstaff Hill Maritime Museum and Village
Tool - Knife, 1930-1955's
This Screw brand knife, made by Charles Taylors (Sheffield Tools) Ltd in England, was used in the making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This knife is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This knife was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Modelling knife; metal blade set into a turned wooden handle. The blade has been deliberately shaped to a 45 degree angle. Label on the handle, ‘Screw’ brand, made by Charles Taylors (Sheffield Tools) Ltd. of England. It has a logo of a screw within an oval. This knife is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. label “SCREW brand”, logo of a screw within an oval, “SUPERIOR QUALITY”, CHARLES TAYLORS” (“SHEFFIELD TOOLS LTD.)”, “ENGLAND”flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, modelling knife, charles taylors (sheffield tools) ltd of england, screw brand knife, sovereign of the sea, ship model, hobby, ship model tool, tool -
Warrnambool and District Historical Society Inc.
Certificate - Certificate, 1897, Warrnambool Industrial & Art Exhibition Order of Merit, pre December 1896
The following is an extract from Warrnambool and District Historical Society Website which explains briefly the Great Exhibition of 1896-97 The Great Industrial and Art Exhibition in Warrnambool in 1896-97 was an exciting affair for the town and the surrounding area. People came from far and wide to be enlightened, educated and entertained, with 70,000 visitors passing through the doors during the three months of the exhibition. Not bad for a town with a population of only 6,500 and a further 9,200 living in the surrounding shire! Planning began at a public meeting attended by 60 people in May 1896 and the exhibition opened in December the same year on the site of the current Light House Theatre. The architects submitted plans for four annexes, complete with turrets, a fernery and a giant flagpole. The site covered 1 acre and included a Marine court, industrial exhibits, an education court, defense and agriculture court, stalls, coach builders, dairy show, an art court and provision for a smorgasbord of various entertainment. (The Story of the Warrnambool Industrial & Art Exhibition 1896-97- E O’Callaghan) This certificate was one of many awards for competency and /or excellence in a wide range of activities and skills. Warrnambool Industrial & Art Exhibition 1896-1897 Competitions-Piano forte solo Gertrude Lewin- prizewinner W J Hickford- Mayor E Lyle Rossiter As a link to one of the biggest events ever held in Warrnambool this item has significant value to the history of Warrnambool. It has social significance also linking a number of names related to the event. Rectangular cardboard. pale cream and aqua background, multi linear gold and deeper aqua border with rounded and right angled corners. An interior border has a swag, linear vertical ribbons with four emblems related to science, labour, arts and industry. Four local black and white photographs, the town council crest and town officials, patron and councillors. An inscription of the prizewinner, event and signatures is written in a cream square in the middle of the certificate.Warrnambool/Industrial & Art Exhibition Opened Dec 21st 1896/ By the Chief Justice of Victoria/ Sir John Madden, K.C.M.G. upper L corner. Closed March 19th 1897/ By the Mayoress of Warrnambool/ Mrs WJ Hickford 'First Order of Merit/ Awarded to Gertrude Lewin/ of Parkville/ for Piano forte Solo (under 15) Signatures of WJ Hickford, President and E Lyle Rossiter, Secretary gertrude lewin, wj hickford, e lyle rossiter, the great warrnambool exhibitiion, warrnambool, pianoforte -
Flagstaff Hill Maritime Museum and Village
Functional object - Water standpipe, Langlands Bros. & Co, 1880-1893
This water standpipe is believed to be the only one of its kind in working order. It was originally located in Warrnambool, on the hillside at the corner of Mickle Crescent and Banyan Street, providing water for the Chinese Market Gardens below, on the flats. It was removed from this location on May 2nd, 1979, with the intention to relocate it at the new Flagstaff Hill Maritime Museum & Village. The standpipe lay in storage for years until the Warrnambool Company, Chemblast, offered to restore it for use as a working display. The display was officially opened on March 31, 2014. The water from the adjacent lake is drawn out with a hand operated water pump, and goes up into the standpipe, where flows through the canvas hose and into the top of the Furphy Farm Water Cart. The display is a visual acknowledgement of the years served by Flagstaff Hill volunteer and Friends of Flagstaff Hill Chairperson, Bob Crossman. Warrnambool’s early settlers had no water supply prior to the mid-1850s. They relied on rain water tanks, domestic wells and springs. The town experienced a huge, destructive fire in William Bateman Jnr. & Co.’s large produce store in November 1856, which highlighted the need for both a fire brigade and a good supply of water. In 1863 a volunteer fire brigade was established. In August 1880 the town celebrated the installation of its first water standpipe on the corner of Liebig and Timor streets. The water was pumped from springs at Cannon Hill through the connected pipeline to the standpipe, then distributed to households via horse and cart. Each of the licenced cart drivers were compelled by Council regulations to keep their carts full from sunset to sunrise, ready to cart water to outbreaks of fire. They received a fee for this service. In 1893 the town installed a water supply, sourced from the Merri River, stored in a reservoir basin and tower in north Liebig Street, and distributed throughout the town in a system of pipes. By late 1939 a reticulated supply was installed, with the water piped in under the Otway Scheme. Standpipes are still used in modern times in rural and remote areas for homes, farms, stock, agriculture and firefighting. Many commercial or government owned standpipes are metered, charging a fee for the quantities of water supplied. This water standpipe was made by Langlands Foundry Co. Limited, Melbourne, which was establish in 1842. It was Melbourne’s first foundry and iron shipbuilder, and one of the largest employers in Victoria at the time. Langlands was known for its high quality workmanship and wide range of goods for mining, engineering, marine, railway and other industrial uses. The company made the first cast bell, the first lamp posts in the colony, and the boiler for the first Australian train. In the 1860s it produced cast iron pipes for the Board of Works, which laid the pipes for Melbourne’s first reticulated water supply. The firm was bought by Austral Otis Co. in 1897.This water standpipe is significant historically as it is believed to be the only one of its type in working condition. The standpipe is significant for being manufactured by early colonial firm Langlands Foundry of Melbourne, which was known for high quality, cast iron products. The firm made the boiler for the first Australian train, assembled the first Australian paddle steamer and made the first Australian cast bell and lamp posts. Langlands was one of the largest employers in Victoria at the time. The standpipe is significant historically as it represents the evolution of water supply services in Australia. Standpipe; vertical cast iron water pipe, painted crimson, fixed in position, tapering inward from the round base to the rectangular joint near the finial on top. A hexagonal pipe extends at right angles from the joint, with an outlet fitting and flow-controlling wheel on the end. A length of canvas hose hangs from the outlet fitting. Inscriptions are on one face of the joint. The standpipe was made by Langlands Foundry Company of Melbourne. Embossed “LANGLANDS FOUNDRY CO. / LIMITED / ENGINEERS / MELBOURNE”warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, flagstaff hill, standpipe, stand-pipe, water standpipe, fire standpipe, firefighting equipment, water supply equipment, chinese market gardens, banyan street, liebig street, water tower, bateman’s fire, working display, water supply, town water, rural water, reticulated water, cannon hill spring, merri river, otway water, water carters, horse and cart water supply, volunteer fire brigade, langlands foundry, early melbourne, iron works, bob crossman, late 19th century water supply -
Bendigo Historical Society Inc.
Clothing - GENTS BOATING SUIT - JACKET
Clothing. Cream cotton with fine black/grey pin stripe. Single breasted - three buttons, possibly tortoise shell, half glazed, half natural. Three pockets. Breast pocket angled on chest. Two rectangular pockets with rounded corners, at hemline. Pockets attached by hand stitching. Seams all enclosed, except for inside sleeves.Handmade buttonholes. Label stitches inside collar: A.M.Poole, Bendigo.Some discoloration of collar.Label inside collar - A.M.Poolecostume, male suit, men's boating suit (jacket) -
Bacchus Marsh & District Historical Society
Photograph, The Prince's Show May 1920 Bacchus Marsh District Exhibit
During May through to July 1920 Prince Edward, later to become King Edward VIII of England toured Australia to thank the country for its support during World War One and to strengthen ties between Australia and the United Kingdom. He arrived in Victoria on the 26 May 1920 and on the 29 May attended a special agricultural show at the Royal Agricultural Showgrounds at Flemington. Bacchus Marsh district was invited to contribute to a display of agricultural produce and products which was displayed in the Government Pavilion at the Showgrounds. The display according to a newspaper report in the Bacchus Marsh Express on 5 June 1920 included 33 trays of fresh fruit, preserved fruit, pickles, sauces, bacon and other small goods, vegetables, hay grasses, grain, turned wood, wines and other drinks', &c., aided by pot plants, flags, draping of maroon and gold (official Exhibit colors) made up a color scheme and general effect worthy of the occasion. The Prince inspected the exhibit and expressed his admiration of it, his only regret was that he could not give more time to its examination. There was also 'an improvised "pheasant" nestling in one corner, and what "amazing" eyes it had!'. The organiser of the display was F. C. Minns, and the decorator was T. Stewart. This photograph is notable for its size and high quality framing. This signifies the importance the local community placed upon being chosen to participate in a major royal event and the desire to record this in a grand and elaborate way for posterity. Very large framed photograph of the agricultural produce and products from the Bacchus Marsh district displayed as part of a special exhibition for Prince Edward, the heir to the British throne when he visited Melbourne in May 1920. The display comprised a wide variety of produce such as fresh and preserved fruit, meats, vegetables, hay, grasses, grain, turned wood, wines and other drinks. The image is divided in the middle into two different angles of the display.A caption in gold lettering at the foot of the image reads 'The Prince's Show May 1920 Bacchus Marsh District Exhibit Royal Agricultural Society Showgrounds'royal visits, shows and exhibitions -
Whitehorse Historical Society Inc.
Machine - Film Strip Projector, late 1030s
Projector was used at Christ Church Anglican Church Mitcham (now All Saints Mitcham) for showing film strips to the congregation, Sunday School and youth groups.Early 'Shelton' film strip projector in a steel grey painted and hinged metal case with carrying handle. Projector has been finished in a 'hammered' meta paint with a large transformer as its base. It is a 240 volt projector. The film strip is manually rolled through the slots of the projector to show each frame separately. Project lens is adjustable for focus and it has a small angle of adjustment foe aligning the image on the screen.Shelton Projector Made in Australiaphotography, projectors -
Whitehorse Historical Society Inc.
Artwork, other - Ink Line Drawing, 26 Highview Gve., Burwood E, 1994
A property illustration by Margaret Picken Commissioned by the real estate agency Fletchers Real Estate for the purpose of advertising 26 Highview Gve., Burwood in 1994 Made by using Rotring ‘Rapidigraph’ drafting pens with Rotring ink on Rapidigraph polyester drafting film, double matte. This property is listed as having sold for $160,250 in 1994 Since being sold the land has been redeveloped, with nothing remaining of the house depicted in this drawing. Trained as a cartographic draftsman within the mining industry, Margaret Picken is an artist who worked producing property illustrations for real estate agencies in eastern suburbs of Victoria from 1983-2005. Retiring from the industry as technological changes favored coloured photography over illustrations, and commissioning companies over sole contractors.This artwork is of Historical Significance as a record of local domestic architecture.A black ink line drawing on drafters film by Margaret Picken, of 26 Highview Gve., Burwood East. An angled birds eye view from the street of a weatherboard house and carport. Extending to the backyards with pool, pagoda, and shed in the background. There are two hole punch holes on near the left edge. There are some crinkles in the paper near the top centre of the work. There is a two centimetre long mark along the centre top edge.26 Highview Gve., Burwood E Margaret Picken -94 Woodards B/Burnwhitehorse historical society, schwerkolt cottage, housing, architecture, margaret picken, burwood, house, garden -
Glenelg Shire Council Cultural Collection
Container - Cigarette dispenser, c. 1907-1930
At the turn of the 20th century cigarette smoking was widely adopted, and elegant smoking accessories became a necessity and items such as this desk dispenser became a popular trend for fashionable men and women. Evidence of trends in the early 1900s.Rectangle metal cigarette dispenser mounted offset on a dark green painted timber base. The tin slides up on an inlay wall rail allowing the tin to slide up and down but not come of the wall. Tin lid is removable to allow the container to be filled The inside internal walls of the tin are angled so that when the tin is lifted it pushes a cigarette into the inset holder to dispense a cigarette. Bottom of the base is lined with green felt.On the top of the lid: 'Cigarettes' in script font.cigarettes, smoking, tabacco, trends -
Whitehorse Historical Society Inc.
Artwork, other - Ink Line Drawing, Margaret Picken, 15 Arcady Gve., Vermont, 1993
A property illustration by Margaret Picken Commissioned by a real estate agency for the purpose of advertising 15 Arcady Gve., Vermont This property is listed as having sold for $178,000 in 1995 Made by using Rotring ‘Rapidigraph’ drafting pens with Rotring ink on Rapidigraph polyester drafting film, double matte. Trained as a cartographic draftsman within the mining industry, Margaret Picken is an artist who worked producing property illustrations for real estate agencies in eastern suburbs of Victoria from 1983-2005. Retiring from the industry as technological changes favored coloured photography over illustrations, and commissioning companies over sole contractors.This artwork is of Historical Significance as a record of local domestic architecture.A black ink line drawing on drafters film by Margaret Picken, of a black and white line drawing of a single story brick house from a angled birdseye view, on a left to right diagonal. On the left, a horizontal driveway leads to a connected carport, with the main of the house of the left. Wrapping around a central decked courtyard. There is a backyard in the background in the upper right corner. There are two hole punch holes just below centre of the upper edge15 Arcady Gve., Vermont Margaret Picken -93 Woodards - B/Burnwhitehorse historical society, schwerkolt cottage, housing, architecture, margaret picken, house, garden, real estate, vermont -
Stawell Historical Society Inc
Photograph, Stawell Town Hall Renovations 1995-1996 -- 38 Photos -- Coloured
Series of colour photographs of Town Hall Renovations 1995/96 TOWN HALL RENOVATIONS 1491: STAIRS TO THE UPSTAIRS SUPPER ROOM & A TABLE WITH SWEETS. 1491A: UPSTAIRS HALLWAY. 1491B: MAIN HALLWAY LOOKING TOWARD MAIN ENTRANCE. 1491C: UPSTAIRS WAITING AREA WITH ENTRANCE TO CINEMA. 1491D ANOTHER ANGLE OF PREVIOUS PHOTO. 1491E: LOOKING INTO THE HALL FROM THE BALCONY. 1491F: STAIRWELL TO THE GROUND FLOOR FROM 1491C. 1491G: STAIRS INTO THE CINEMA OTHER SIDE OF 1491C. 1491H: STAIRS TO UPSTAIRS CINEMA ENTRANCE. 1491I: GROUND FLOOR CINEMA ENTRANCE.stawell, town hall renovations -
Mission to Seafarers Victoria
Photograph - Photograph, Black and white, Argus newspaper, 24 February 1945
Photograph was taken at the Mission to Seafarers Melbourne. It is historically significant as it marks a royal visit made by the Duke and Duchess of Gloucester during the Duke of Gloucester's term as 11th Governor General of Australia (1945 - 1947). Princess Alice, Duchess of Gloucester, GCB, CI, GCVO, GCStJ, GBE (born Lady Alice Christabel Montagu Douglas Scott; 25 December 1901 – 29 October 2004) was the wife of Prince Henry, Duke of Gloucester, the third son of King George V and Queen Mary. Frank Oliver was MTS chaplain during this period. The Gloucesters did not return to Australia on any official visit until 1965. (see ADB entry for Duke of Gloucester) According to the list of engagements from the Argus, on Saturday the Duke and Duchess left Governor House to visit the Central Institute at 11am where they were received by the Governor and Lady Dugan, the chaplain (Padre Oliver) and members of the committee. They left at 11.15am : the legend of the picture "AS THE DUCHESS LEFT THE MISSION TO SEAMEN Central Institute on Saturday morning, Padre Frank Oliver, chaplain, called for three cheers, which were given heartily."This photograph reveals the contemporaneous relationship between Australians and the British Royal family and connection through the International organisation that is the Mission to Seafarers. Current President is HRH the Princess Royal.Black and white photograph of Princess Alice the Duchess of Gloucester. The Duchess at middle left with Chaplain Frank Oliver at middle right. The Chaplain is waving and possibly leading a cheer. He is wearing a naval uniform. The Duchess is wearing a black hat and white short-sleeved dress holding a bunch of flowers. In the left of the photograph is a man holding his right arm up hiding his face from view. In the background there is a crowd of onlookers behind a railing.Front: "Duchess of Gloucester 1969" in blue pen in the bottom right corner. (see also notes re this date) There is also what appears to be a watermark on the middle left side. Back: "H.R.H. Duchess of Gloucester visiting Missions to Seamen, Melbourne." in the top left corner on an angle. "Copyright The Argus, Melbourne. Photograph Neg. No. U-646 Ref. No." in purple ink in the middle. The Neg. No. is in pencil.uniform, flowers, chaplain, princess alice, mission to seafarers, mission to seamen, duke of gloucester, duchess of gloucester, governor general, frank leslie oliver, padre oliver, royal visit, flinders street, melbourne -
Mission to Seafarers Victoria
Letter - Correspondence, 28/04/1951
In this letter Allan refers to Mr Jim Hayes' forth-coming visit to MelbourneQuinn CollectionA self-folding letter written in green ink (0868.a) headed Oslo and dated 28/04/51. It is addressed to Mrs K Hayes, 14 Victoria, this has been crossed out and replaced by 'Fitzroy' Street, St Kilda, Victoria. The return address is Allan Quinn, C/- G.P.O.,Oslo, Norway. Written at right angles to the return address Allan has written "Made a mess of the address but my thoughts were wondering".letters-from-abroad, allan quinn, norway, oslo, alette andersen -
Glenelg Shire Council Cultural Collection
Photograph - Photograph - Portland, Victoria, n.d
Black and white photo. Same location and people as 7775, 7776. Similar to 7776, photo taken from different angle, men in different positions. 7775 - Black and white photo. Rural setting, hills in background. Several men sitting on benches or standing near an easel with a board on it, all with backs to camera. Old ute and motorbike on right, several firearms leaning against benches, flag flying. Possible at the Portland rifle range. -
Halls Gap & Grampians Historical Society
Photograph - Coloured, C 1980s
This is a photo of one of the trestle bridges on the Heatherlie Quarry train line. It is located near the current site of "the Pines" campground.Photo is of a derelict trestle bridge over a shallow creek, taken on an angle. There are many sleepers missing and the bridge is surrounded by thick bush and trees. There is bracken in the foreground. A woman wearing a blouse made of material with a white background with a colourful pattern, blue jeans, a white "golf shade" and a red jumper ot jacket tied around her waist is walking on the near side of the bridge. Two men and two women are standing at the opposite end.structures, bridges, quarrying, heatherlie -
Warrnambool and District Historical Society Inc.
Tools, Phillips Collection 8 wood planes, Late 19th/early 20th centuries
These hand planes belonged to Ernest Brighton Phillips (1875-1924). Born in Warrnambool, Ernest Phillips learned cabinet-making at the Warrnambool Box Works. In the late 1890s he established his own furniture store at the corner of Liebig and Koroit Streets. By the early 20th century Phillips had the largest furniture warehouse and factory in Victoria outside of Melbourne. He sold his products all over Australia. He and his family lived at ‘Heatherlie’ in Koroit Street and the site of this home is now the complex of flats for senior citizens known as ‘Heatherlie’. These tools are of considerable interest as they belonged to Ernest Phillips, a prominent Warrnambool businessman in the late 19th and early 20th centuries. They are also a good example of the tools that were used 100 years ago. These are eight woodworking tools (hand planes) which belonged to Ernest Phillips of Warrnambool. They are rectangular pieces of smooth wood, some with an extra piece of wood at the lower edge and they all have a metal blade inserted through the wood at an angle. The blade protrudes at the base of the wood and when moved by hand along a surface it shapes the piece of wood being worked on by flattening and smoothing the rough surface and reducing the thickness. These planes have been well-used.‘E. Phillips’ernest phillips, history of warrnambool, warrnambool -
Bendigo Historical Society Inc.
Photograph - HUSBAND AND WIFE, early 1900's
black and white photograph, mounted on brown board. Young man seated, young woman standing. Young man wearing 3 piece suit, chain and albert. Young woman wearing mid calf length pale dress with dark belt and buckle, dark stockings and boots. Very large bow at back of hair. Printed at angle BL corner 'Edgar Evans/Royal Studio/Eaglehawk' On back in lead pencil 'Mr''Edgar Evans'person, family, husband and wife -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Tongue depressor with anaesthetic tube attachment used by Dr Lorna Lloyd-Green
This particular type of tongue blade comes in sizes 2,4,6, and 8 and can be easily fitted to the Boyle Davis mouth gag.Metal tongue depressor, metal with a metal tube and nozzle attachment. Consists of a shaft and two metal sections at right angles to the shaft. Distal section is turned inwards to act as a lever. Proximal section is shaped as a flange with multiple serrations on the underside. There is a small metal tube attached along the entire length of the flange. The tube is turned downwards at the junction of the flange and the shaft, with a small bulb at the end. A small piece of tubing can be attached to this bulb. -
Hume City Civic Collection
Photograph, c. 1980's
The original single storey hotel was built by the vigneron, F. F. Bubeck. The hotel was destroyed by fire in 1901 and the present red brick building was built by George Millett. The hotel provided meals and accommodation for rail travellers.A coloured photograph of the Royal Hotel which is situated on the sw corner of Brook and Evans Streets. A grey car is angle parked on the LHS of the photograph and there is a line of plane treet around the curbside. The 2 storey hotel has red brick walls with cream trim around the windows and blue shutters on the windows on the upper storey. The roof is clad with terracotta tiles. Facing Brook and Evans Streets on the roof line are the parapets with the words 'Royal Hotel' on them.ROYAL HOTELevans street, brook street, bubeck, f.f., millett, george, royal hotel, george evans collection -
Whitehorse Historical Society Inc.
Photograph, Whitehorse Road looking South, 2000
Produced as one of a series of 24 prints commissioned by Nunawading & District Historical Society -|Theme: Intersections of Mitcham and Nunawading 2000/2001.|See also Series by P. Simmenauer on the same theme.Black and white photograph - print and negative of Whitehorse Road looking West wards towards corner of Mitcham Road - along service road in Whitehorse Road. From left - right - buildings: Fernwood Female Fitness Centre above offices of Phillip Baressi, Federal Member of Parliament; Hertz Car Rental Yard; Telstra Mobile Shop; Mr. Muffler; Pedders Suspension; Mitcham Hotel. Parallel and angle parking in service road.baressi, phillip, fernwood female fitness centre mitcham, hertz - car rental, telstra, mr muffler, pedders suspension, mitcham hotel -
Bendigo Historical Society Inc.
Functional object - Sign
A rectangular metal sign painted dark blue with white writing and a white line around the edge which has a quarter circle indentation on each corner. The writing is all in capital letters and states DO NOT SPIT ON FOOTPATHS PENALTY £5. the reverse of the sign is identical. The sign is 30.5 centimetres long and 15.5 centimetres wide. It has a four centimetre by 15,5 centimetre piece at right angles on the end which has three holes in it for mounting. signs, public health -
Bendigo Historical Society Inc.
Document - MARKS COLLECTION: PLAN OF UNDERGROUND WORKING IN BALLERSTEDT & SON MINE, 28th November, 1965
Buff coloured document, heavy parchment, printed in black. On top of plan 'plan showing underground workings in the claim of Ballerstedt & Son.' Plan shows underground workings in red, with distances and angles. On bottom of drawing 'Ballerstedt's South Boundary'. Signed on bottom in black ink (indecipherable signature) and dated 28.11.65. Document attached is related to the donor Phillipa Marks' family and contains the recollections of her great grandfather in regard to Bendigo's Jewish community and synagogues.bendigo, mining, ballerstedt & son mine -
Mont De Lancey
Domestic object - Mantel Clock
The mantel clock has a rich history that dates back to the 18th century. These smaller clocks were designed during an age when people wanted elegant timepieces that fit on mantels or shelves. Their compact size and decorative designs made them a popular choice for homes of the time. They graced the mantelpieces or tables in homes, serving as both functional timepieces and sophisticated decorations. These clocks often feature ornate wooden carvings and intricate designs, with their gentle ticking and chimes adding a cozy ambiance to living spaces. It was used by Harold and Jean Parker.An antique wooden mantel clock made in USA with an Australian made Duff brand oak case with a plain angled top with round shaped pillar styled sides. It has a white ceramic dial face with black digits and black metal hands. The dial is covered by a glass and gold trimmed covering that may be opened on the right side. Inside the case is a Waterbury Clock Co of USA key and the internal workings are visible. It is not in working order.'Duff' brand brass plaque on back of cover. The key has 'Waterbury Clock Co USA' stamped on it.clocks, timepieces, clock components, clock keys, mantel clocks -
Geoffrey Kaye Museum of Anaesthetic History
Tool - Laryngoscope, Chevalier Jackson, Circa 1913
Please refer to The Wood Library for further information about this piece. URL: https://www.woodlibrarymuseum.org/museum/item/664/jackson-laryngoscope Chevalier Jackson direct laryngoscope, with attached small light bulb inside the internal blade. Brass coated piece with a large size. This piece has a discoloured and beaten surface with visible hit marks, deformation at the back of the blade and green spots in handle area. The hand anatomic handle is faceted and designed with a thumb rest section at the angle. Welding sections are visible along the blade base external canal and handle attachment area. No inscriptions.Anychevalier jackson, laryngoscope, light bulb, brass -
Warrnambool and District Historical Society Inc.
Instruments, Measuring tool, CLate 19th century
This instrument is a folding arm protractor. It is used for measuring angles on the vertical and horizontal planes. The two folding arms have small metal support springs where they are attached to provide support and the other ends have pins with which to mark particular points. A screw mechanism on the rim allows fine tuning of plotting. Chadburn, Brothers were fine instrument makers of Sheffield making optical and nautical instruments during the 19th century. This item was donated by a local resident whose grandfather Carl Spence was a bridge builder who worked on the Warrnambool Breakwater extension c 1919. This item has scientific significance which is possibly linked via the owner to one of Warrnambool's most well known landmarks.Brass, circular instrument with fold out sections which are hinged and a movable section. The circular part is marked in degrees around the circle. Notches on inner rim at 90 degrees intervals. Chadburn ,Brothers Sheffield. Graduated scale measuring 360 degrees.warrnambool, warrnambool breakwater -
City of Ballarat Libraries
35mm Slide, St Andrew's Kirk, Ballarat circa late 1950s
St Andrew's Kirk faces into Sturt St, but this photograph is taken at an unusual angle from Dawson St. Architecturally this church is of great importance being part of the group of churches in Dawson St which includes St Patrick Cathedral, and the former Congregational and Baptist churches. The cast iron fence was erected after 1900. Mrs Bon Strange and her husband Bert were well known Ballarat residents. When Mrs Strange died some years ago, her extensive slide collection was sorted through and those relevant to Ballarat were gifted to the Ballarat Library. -
Bendigo Military Museum
Photograph - Royal Australian Survey Corps Surveyors in the Field – Project Cutlass, New Guinea, 1956 – 1957
This is a set of 23 photographs of surveyors and support staff in the field undertaking tasks in New Guinea 1956 – 1957. The surveyors were employed in the establishment of mapping and geodetic control for Project Cutlass, the “Ship-Shore” survey of the New Ireland province. In this survey operation surveyors used theodolites to observe horizontal and vertical angles and chains to measure base line distances between survey stations. Bob Skitch shown in photo .7P was in the 2nd year of his career in the Australian Army. He achieved the rank of Lieutenant-Colonel, and his last appointment was the CO of the Army Survey Regiment from 1976 to 1980.This is a set of 23 photographs of surveyors and support staff in the field undertaking duties during Project Cutlass located in New Ireland, New Guinea 1956 – 1957. The photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 300 dpi. .1) - Photo, colour, 1956. Surveyors travelling main road from Kavieng to Namatanai, New Ireland. .2) - Photo, colour, 1956. Unidentified surveyors assessing recovery of their vehicle after bridge collapsed on west side of New Ireland. .3) - Photo, colour, 1956. Unidentified surveyors assessing recovery of their vehicle after bridge collapsed over flooded creek on west side of New Ireland. .4) - Photo, colour, 1956. Survey personnel L to R: Bev Uwins, John Lambie, Bob Thompson, New Ireland. .5) - Photo, colour, 1956. Survey base camp, New Ireland. .6) - Photo, black & white, 1956-1957. Geoff Helsham with possible human remains, New Ireland. .7) - Photo, black & white, 1956-1957. Bob Skitch undertaking survey observations using Wild T2 theodolite, New Ireland. .8) - Photo, black & white, 1956-1957. Chas Beach undertaking survey observations using Wild T2 theodolite, New Ireland. .9) & .10) - Photo, black & white, 1956-1957. Kev Parker (cook) New Ireland. .11) - Photo, colour, 1957. Brian Berkery taking a break, Top Manor Island, Lihir Island Group off New Ireland. Latitude -2° 46”, Longitude 152° 40”. .12) - Photo, colour, 1957. Survey base camp L to R: Chas Beach, Bev Uwins, Feni Islands, New Ireland. Latitude -4° 05”, Longitude 153° 45”. .13) - Photo, colour, 1957. A Hous Kiap. (Kiaps, known formally as district officers and patrol officers, were travelling representatives of the British and Australian governments), New Ireland. .14) & .15) - Photo, colour, 1957. L to R: Joe Farrington, Tom Royle Bob undertaking survey observations using theodolites from an improvised timber tower, New Ireland. .16) & .17) - Photo, colour, 1957. US Army ship FS216 used for ship-to-shore triangulation docked at Rabaul, New Britain. .18) - Photo, colour, 1957. US Army ship FS216 used for ship-to-shore triangulation docked at Kavieng, New Ireland. Sight target on top of mast. .19) - Photo, colour, 1957. Survey personnel onboard US Army ship FS392, L to R: Peter Frodsham, Bob Thompson, Doc Reid, John Underwood, remainder unidentified, New Ireland. .20) - Photo, colour, 1957. Survey base line party heading ashore, New Ireland. .21) - Photo, colour, 1957. Survey personnel rowing US Army assault boat L to R: Kev Parker, Chas Beach, folded up survey beacons overhanging stern, New Ireland. .22) - Photo, colour, 1957. Les Bailey onboard US Army ship departing Rabaul, New Britain for Brisbane. .23) - Photo, colour, 1957. Ron Newman onboard US Army ship departing Rabaul, New Britain for Brisbane. Active volcano in background..1P to .23P annotated on back – ‘Operation Cutlass’, personnel names, the year and the location. royal australian survey corps, rasvy, army survey regiment, fortuna, a, army svy regt, asr, surveying