Steel framed paraffin lamp with steel base. Glass bulbous chimney with embossed writing and makers mark. Thin steel wire for protecting glass, and as handle on top with hook indent, attached to frame. Mechanism for raising and lowering glass casing by small handle attached to frame for facilitating lighting. Wick trimming device on side of base, and cap covering hole in base for filling.On glass - 'Feuerhand, Made in Germany' embossed. On opposite side, company logo of hand holding flames. On base - 'Made in Germany', embossed. Company logo. '*Nr. 327' Company logo on oil cap, wick trimming knob and on top of framelighting, kerosene and oil, hurricane, lamp, paraffin, feuerhand, lighting. dora buckley

TROVE : The Argus (Melbourne, Vic. : 1848 - 1957) Saturday 17 November 1877 p 11 Advertising PATENT ZELTZOGENE CHARGES, D. FEVRE. In boxes of ten charges, price 6s. per box. Wholesale agents, Rocke, Tompsitt, and Co., 3 Flinders street east. TROVE : ''Rocke Tompsitt Pharmaceutical wholesaler Rocke Tompsitt and Co Ltd has returned to the profit list after recording a $20,381 loss during 1976-77. However, annual dividend has been reduced from 3.5c last year to 2.5c. The group announced yesterday an after-tax profit of $312,000 after sales of $27.09 million, up 26.8 per cent. Directors said the improvement in the profit had come from the return to profitability by the Victorian wholesaling company, and the inclusion of the profit from the T. G. Cullum group for a full 12-month period. They said the company's other subsidiaries had continued to trade profitably. The group had continued to operate profitably despite excessive government price control over drugs in pharmaceutical-benefit scheme. However, the directors were optimistic that a satisfactory result would be achieved in the present year.Hexagonal in section, clear amber glass bottle with black bakelite screw top and white paper label with red text on one side. Half full with original contents. Embossed text between two panels of 'x' stipple pattern, numeral on plain side near base, numerals monogram, and letters embossed on base. Paper label in red printed text 'SOL. MERCUROCHROME', 'POISONOUS', 'NOT TO BE TAKEN'. 'Rocke, Tompsitt & Co. Pty. Ltd., Flinders-st., Melbourne'. On side of bottle between two panels of 'x' stipple pattern the embossed text 'NOT TO BE TAKEN'. On plain side near base of bottle, '2'. On base of bottle '338' over AGM monogram, with 'M' to one side, over 'F1071'.rocke, tompsitt, mercurochrome, poison, amber glass, bakelite, pharmacy

This green glass bottle has been handmade from about the 1840s to 1870s. The bottle, possibly used to store or soda or mineral water, was found in the coastal waters of Victoria. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe into the molten glass blob at the end of the pipe. The glass was blown out to fit into the shape of the cylindrical dip mould. Once it hardened, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck while carefully using a tool to hold the base. A 'ponty' tool would have been used to form the shallow base. The mouth of the bottle was cut off from the blowpipe and a piece of soft glass would be added to the mouth to then form the lip. Bottles like this would usually be sealed with a cork.Although this bottle is not linked to a particular shipwreck, it is recognised as a historically significant example of handmade, 1840s to 1870s beverage bottles imported for use in Colonial Victoria. The bottle is also significant for its association with John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several shipwrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, green glass. Applied blob lip with glass blister. Shoulder seam, body tapers inwards towards base. Thick heel, shallow base. Blow creases and bubbles in glass. Sediment along inside of bottle.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, collectable, bottle, dip mould, soda bottle, beverage bottle, green glass

This prototype was made by Cobus Vissar in the early 2010's. His design was well-received, and he was asked to make the ceremonial cross for Luther College chapel services. The cross, based on this prototype, is now used for all formal and religious services in Luther's chapel.Chestnut brown wooden cross on smaller pole for carrying, which sits in a wooden base of the same colourchapel

Framed print of a sepia photograph showing the camp at 'Bukit Knuckle', an operational base of the 3RAR in Borneo. Images shows an aerial view of the camp and surrounding landscape. Underneath the print is added 'BUKIT KNUCKLE' B COV 3RAR OPERATIONAL BASE, BORNEO 1965 On reverse is marked 'Donated by Keith Matthews 1995'bukit knuckle, sungei koemba, 3 rar, indonesia malaysia confrontation

This bottle was made in Scotland and recovered decades later from a shipwreck along the coast of Victoria. It may have been amongst the ship's cargo, its provisions or amongst a passenger's personal luggage. It is now part of the John Chance collection. Stoneware bottles similar to this one were in common use during the mid-to-late 19th century. They were used to store and transport. The bottles were handmade using either a potter's wheel or in moulds such as a plaster mould, which gave the bottles uniformity in size and shape. The bottle would then be fired and glazed in a hot kiln. Makers often identified their bottles with the impression of a small symbol or adding a colour to the mouth. The manufacturer usually stamped their bottles with their name and logo, and sometimes a message that the bottle remained their property and should be returned to them. The bottles could then be cleaned and refilled. DUNDAS POTTERY WORKS - The Dundas Pottery works were established in 1828 by William Johnstone in partnership with John Forsyth and John Mc Coll. Located where the Forth and Clyde Canal joined the Monkland Canal, North of Glasgow. Johnstone sold the pottery in 1835 to Robert Cochran and James Couper. Mc Coll was retained as manager until 1837when in 1839 Cochran & Couper sold the pottery and purchased the St Rollex Glass Works. George Duncan took over briefly but died in 1841, with the pottery possibly being run by his widow Helen and a potter named Alexander Paul. James Miller was the manager at the time and he bought the pottery in 1856, in partnership with John Moody. Miller's long and careful stewardship of the pottery saw success from the export market which allowed him to purchase the North British pottery in 1867 until 1874 when it was sold. In 1875, Miller, in partnership with John Young, leased part of Caledonian Pottery, naming it Crown Pottery, however, it burned down in 1879. In the early 1880s, Young extended the pottery and named it Milton Pottery. Miller’s son, James W., became a partner in Milton pottery in 1905. James Miller Snr died in 1905 and the company continued as a limited liability company, being sold to the Borax Consolidation Ltd in 1929, but it was unsuccessful and Possil pottery purchased some of the company's equipment before it finally closed in 1932. From 1828 until the James Miller period of circa 1856, the pottery produced salt-glazed stoneware for the local industrial trade; mainly bottles and drain pipes. James Miller produced various bottles, whisky and acid jars, casks, butter crocks, jam jars and domestic wares in Bristol glaze. He streamlined the water filter manufacturing, which had become a speciality of the pottery, and a dedicated section of the pottery was created solely for their production, which was exported worldwide.This stoneware bottle is historically significant for its manufacture and use in the late 19th to the early 20th century. This bottle is historically significant for its connection with the well-known stoneware manufacturers, Dundas Pottery of Glasgow, Scotland. The bottle is also significant as it was recovered by John Chance, a diver, from a wreck on the coast of Victoria in the 1960s-70s. Items that come from several wrecks along Victoria's coast have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, salt glazed stoneware, beige, part sealed with wax and cork, very little discolouration. Inscriptions stamped near base.Stamp: [symbol of concentric ovals], text within the symbol "PORT DUNDAS POTTERY COY." and "GLASGOW". Stamp:[Symbol - square with short vertical line in centre of base line]flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, john chance, shipwreck artefact, stoneware, ironstone, pottery, bottle, port dundas pottery, glasgow, antique bottle, william johnstone

Beer came in bottles sold at licensed premises either locally or in larger cities visited during shopping expeditions. The shape of bottles were recycled remaining the property of the manufacturer who paid for their return. History of Manufacturers Bottle Co. of VictoriaHistorical: Change of bottles - shape, glass, embossing. Collected by bottle collectors. Aesthetic: Display showing embossing & shape especially if in good condition.Clear brown glass beer bottle. Straight sides 190 mm from base. Sharp taper to neck which tapers for 90 mm to opening. At top of straight side is a heavily embossed spade (as in cards) shape with M.B. at top and C.V. beneath - both inside spade shape. Bottle made with 2 longitudinal halves. At the bottom near the base is heavily embossed print (in capital letters) around the circumference. At the base is embossed a horseshoe shape.Inside spade shape: M. B. above C. V.. Along the circumference at the bottom "The Property of Manufacturers Bottle Co. of Victoria Pty. Ltd.'. At the base; A horse shoe shape with a pointed curve.bottle, beer, munufacturers bottle co. of victoria, horse shoe shape on bottle, spade shape on bottle

http://en.wikipedia.org/wiki/File:Tilley-storm-lantern-X246-May- Tilley storm lantern, this model has been in production since 1964 The Tilley Lamp derives from John Tilley’s invention of the hydro-pneumatic blowpipe in 1813 in England. http://en.wikipedia.org/wiki/Kerosene_lamp#Pressure_lamp Pressure lamps are far more sophisticated than wick lamps and produce a much brighter light, although they can be quite complicated and fiddly to use. This type of lamp is commonly known in the UK as a "Tilley lamp", after a manufacturer of the same name, and in North America as a "Coleman lantern" for similar reasons. A kerosene blowtorch displaying the various aspects of the kerosene burnerA pressure lamp has a fuel tank at the bottom with a small pump to pressurise the kerosene. There is a narrow gap up to the top of the lamp, called a flue, and at the top of the lamp there is a burner (gas outlet). Directly underneath the burner is the mantle, a fabric bag coated with chemicals that incandesce when heated by the gas flame. The burner lamp is known for its brightness. It is so bright because of the amount of pressure that is placed onto the wick. This pressure allows a steady flow of the gasoline and a constant light Tilley Storm Pressure Lantern, model no x246 has a stainless steel base which is filled with kerosene, with a pump used to pressurize the kerosene vapor. Under the base is a sticker.On top is a black hood with vents which sits on the glass heat resistant shade. The glass shade has an etched label. It has a white and pink mantle on the central rod with a long shaped stainless steel handle, this folds down when not in use.Base - Sticker Tilley Lamp Model X246 Etched on glass shade Tilley, Durosil, ITI, Heat Resistant. Made in Englandlantern tilley pump pressure mantle kerosene methylated spirits stainless steel lamp kerosene lamp round glass cylinder

Cohn Bros Bendigo soda water bottle with marble. Thick glass container to withstand pressure of carbonated liquid. Codd Patent design. "M" on base indicates date 1900-1910.Green tinted glass soda water bottle, with marble. Text moulded in glassThis bottle is the property of Cohn Bros Ltd, Bendigo. Soda Water. M on base (date indicator)bottles, soda water bottles, cohn bros bendigo, codd patent

Bottled milk was bought at the local store. The bottles were re cycled and remained the property of the manufacturer. to encourage their return a deposit was usually paid on them. Pre 1966 liquids were measured in pints.Historical: Dairy farmers lived in the Kiewa Valley and sent their milk to be pasteurised and bottled by a local Dairy Company. The bottles changed shape, size and embossing. Aesthetic: Display showing variations of shape, embossing and size Clear glass small bottle with straight sides nearly two thirds up from the base tapering gently to the opening which has a thick long lip before the opening. Heavy embossing around the circumference on each side where tapering begins. Light embossing on the base.Half Pint Milk This Bottle Belongs to Milk Bottles Recovery Ltd. And Cannot be Used With Out Written Permission Base: '2' Common Seal 'A' with 'G' and 'M' inside the A / '8' / '11' / 'M163'milk, dairy, farmers, kiewa, milk bottles recovery ltd

An early black and white photograph which shows a man and a woman standing on the bridge that crosses the Steavenson River at the base of the Steavenson Falls in Marysville in Victoria.An early black and white photograph which shows a man and a woman standing on the bridge that crosses the Steavenson River at the base of the Steavenson Falls in Marysville in Victoria. The Steavenson Falls are named after the Victorian Assistant Commissioner of Roads and Bridges, John Steavenson who arrived in Victoria in the early 1860s.steavenson river, steavenson falls, marysville, victoria, waterfalls, john steavenson

Foresters usually measure the diameter of trees at Breast Height – traditionally 4 foot, 6 inches – now 1.3 m – which is termed Diameter Breast Height Over Bark (DBHOB). Basal Area is the cross section of the tree trunk at breast height, and the sum for the stand or group of trees is expressed square feet per acre (after 1973 it was expressed in square metres per hectare). Lots of skinny trees, or a few fat ones, can have the same Basal Area, but when combined with the number of stems, Basal Area is a good indicator of stand density. Two common methods are used to measure of Basal Area – fixed area plots and angle count sampling. 1. Fixed area plots require setting out a small area, commonly 50 m x 20 m, and measuring all the trees at breast height, and doing some quick sums. 2. Angle count sampling involves a simple sweep of the forest from a fixed sampling point using a relascope, dendrometer sight, angle gauge, or glass wedge prism. This wooden builders ruler has been shaped at one end to create a shallow angle (usually less than 3 degrees). Standing in one spot, a sweep is made with the wedge held to the eye, and trees are counted as either “in” or “out”. The number of trees is multiplied by conversion factor of the wedge (10 in this case) to estimate basal area. It’s very quick and effective.Basal Area Angle Gauge The two ends fold up and one end (on the right) has been reduced in width to create a shallow angle for the viewer Home made by cutting down a wooden builder's ruler Many forestry students made their own Basal Area Angle Gauges and its thought this may be oneforest measurement, forests commission victoria (fcv)

This bottle was used in the Tawonga District General Hospital which was built in the 1950's specifically for the increase i population due to the Kiewa Hydro Scheme.Hypothecary bottle of clear green glass with screw top. Front and base are heavily embossed.Front: Gauge with horizontal lines equal distance apart - at the top 'CC' and going down on every second line - 100, 200, 300, 400, On each side 10 vertical lines. Base:'PGC' '5' in middle '1FG-L'hypothecary bottle, medical, hospital

Wedding gift to Mr Riseborough's grandmother Mrs W Henderson 1884.Silver and glass butter dish - base is a silver round plate with ferns engraved around the top edge. The round cut glass bowl has two silver handles There is a silver fern pattern engraved on the lid with a silver horse shaped knob.Diamond shaped engraving on base of glass dish with various markings. Underside of lid is TD engraved.butter dishes

This olive green glass bottle has been handmade from about the 1840s to 1870s. The bottle, possibly used to store or soda or mineral water, was found in the coastal waters of Victoria. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe into the molten glass blob at the end of the pipe. The glass was blown out to fit into the shape of the cylindrical dip mould. Once it hardened, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck while carefully using a tool to hold the base. A 'ponty' tool would have been used to form the push-up base. The mouth of the bottle was cut off from the blowpipe and a piece of soft glass would be added to the mouth to then form the collar. Bottles like this would usually be sealed with a cork.Although this bottle is not linked to a particular shipwreck, it is recognised as a historically significant example of handmade, 1840s to 1870s beverage bottles imported for use in Colonial Victoria. The bottle is also significant for its association with John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several shipwrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, olive glass. Applied straight lip with bumps and bubbles. Shoulder seam. Body tapers inwards towards base. Heel has uneven thickness. Concave push--up base. Some imperfections, blow lines and scratches in glass. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, collectable, bottle, dip mould, soda bottle, beverage bottle, green glass, olive glass

This broken black glass bottle has been handmade from about the 1840s to 1870s. The bottle, possibly used to store ale or soda or mineral water, was found in the coastal waters of Victoria. It is part of the John Chance Collection. Black glass is one of the oldest bottle colours and dates back to the early 17th century. In the 1840s to late 1870s black glass bottles were mainly used for liquor and ale. All glass is made from silica, which is found in quartz sand. The naturally occurring sand has impurities, such as iron, that determine the colour of the glass. Residual iron leads to green or amber coloured glass, and carbon in the sand makes that glass appear as ‘black’. A strong light behind the glass will show its colour as dark green or dark amber. This handmade bottle appears to have been made in a three piece dip mould with a cylindrical base and two removable neck pieces. The molten glass was blown into the mould to give the body a uniform symmetrical shape and size. After the bottle was blown, the glassblower removed it from the mould then the base was pushed up with a pontil tool that gave it the concave shape. The finish for the mouth was added by hand or with another tool to form the ring collar. The mould gives the body a slightly textured surface. There is usually a line around the shoulder and on the sides of the neck where the mould meet, and a lump or mark in the centre of the base, called a pontil mark, where the push-up tool was removed. Although this bottle is not linked to a particular shipwreck, it is recognised as a historically significant example of handmade, 1840s to 1870s beverage bottles imported for use in Colonial Victoria. The bottle is also significant for its association with John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several shipwrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, black glass, 'gallon' style. Applied broken lip, wide collar. Shoulder seam, two side seams, body tapers inwards towards base. Concave base. Glass has bumps, creases and imperfections.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, collectable, bottle, dip mould, soda bottle, ale bottle, beverage bottle, black bottle, three pece mould

Part of the Kevin John Herman, No. 397661, Collection. See Cat No. 5942P for details of his service record.Barrel shaped silver coloured pewter tankard with handle. Engraved details on one side. Manufacturer's logo and details stamped on base.Engraved on side: “PRESENTED BY, RCSC, TO MAJ. K.J. HERDMAN RFD, ON RETIREMENT, 30 JUN 88.” Stamped on base; Logo (Fler de lis symbol), RENAISSANCE PEWTER, (in a circle).memorabilia, tankard, kevin john herdman

Earthenware, 2 teacups, 2 saucers, 2 side plates and 1 cereal bowl with side plate in 'Real Old Willow' pattern. Traditional dark blue Willow Pattern, with hand-painted gold rims. Small Willow Pattern cameo at the base inside each cup.Pattern Number 8025. Small Willow Pattern cameo at the base inside each cup.ornaments, earthenware, booths pty ltd, tunstall, england, early settlers, pioneers, moorabbin, bentleigh, cheltenham, ormond, market gardeners

W.D & H.O.Wills (Australia) Ltd began manufacturing tobacco products in 1913 at its Raleigh Park factory in Kensington, Sydney. In 1945 an estate of 16 acres was purchased at East Bentleigh, Melbourne, with a further 22 acres purchased later and the Virginia Park manufacturing branch was established. The 1950s were to be one of the most successful decades in the company’s history and it enjoyed a peak of 83 per cent market share in 1954. But this was also a period of increased competition as Phillip Morris and Rothmans entered the Australian tobacco market. By 1972, increased competition meant that the company’s market share had slipped to 39%. By the time tobacco advertising was banned on Australian radio and television in 1976, Wills' market share had fallen a further 6%. In 1985 Wills combined the separate factory operations in Sydney and in Melbourne into one site at Pagewood, Sydney which took on the name Virginia Park. In 1989 W.D & H.O.Wills (Australia) became a subsidiary of the British American Tobacco Industries group of companies. 1999 British American Tobacco merged with global competitor Rothmans International. Rothmans in Australia and Wills merged to form the wholly-owned subsidiary British American Tobacco Australia. The merger left British American Tobacco Australia, Phillip Morris and Imperial Tobacco Australia Virginia Tobacco, or Flue-cured tobacco, is named after the US state where it was first cultivated. It is also called ‘bright tobacco’ because of the yellow to orange colour it achieves during curing. It grows particularly well in subtropical regions with light rainfall, such as Georgia, Florida and the Carolinas in the USA, Southern Brazil and Zimbabwe. In Australia, blends are predominantly Virginia, for example, Dunhill and Winfield. Virginia blends contain only flue-cured Virginia tobacco W.D & H.O. Wills Pty Ltd - In 1945 an estate of 16 acres was purchased at East Boundary Road, East Bentleigh, Melbourne, with a further 22 acres purchased later and the Virginia Park manufacturing branch was established. The plant was closed 1985 when the firm moved to Pagewood, Sydney New South WalesA circular tin with a lid that is opened by twisting a coin in the rim and closed by screwing the lid down. Instructions written on base of tin. Contained ‘Log Cabin’ tobacco.lid :LOG CABIN / FLAKED GOLD LEAF / TOBACCO / base ; LOG CABIN / SKRU SEAL / To open twist coin / to reseal screw lid / TOBACCOtobacco, cigarettes, smoking pipes, cigarette papers, moorabbin, cheltenham, bentleigh, log cabin tobacco, w d & h o wills pty ltd , british american tobacco ltd, rothmans international ltd, east bentleigh

An early black and white photograph which shows a man and a women standing on the track that leads to the base of Steavenson Falls in Marysville in Victoria.An early black and white photograph which shows a man and a women standing on the track that leads to the base of Steavenson Falls in Marysville in Victoria. The Steavenson Falls are named after the Victorian Assistant Commissioner of Roads and Bridges, John Steavenson who arrived in Victoria in the early 1860s.steavenson falls, marysville, victoria, waterfalls, john steavenson

Dean collection, refer Cat No 4575PThis assembly is in the shape of a small cannon shell with projectile. 1. The base is shaped like a cannon shell. Inside is a ring to butt your ashes. It is made of a metal, the coating of which is pock marked. 2. The centre piece is tapered from 5 cm down to 3 cm. Underneath it is the fuel charging socket. On top is the flint button and fire hole. 3, The nose cone is shaped like an A.P. projectile. It tapers from 3 cm to a point.The base of the shell has "CHNA 1953.9. 1-7".war, smoking

The Art Directors Club Annual Awards began in 1921. They celebrate "the artistry and craftsmanship that is synonymous with beautiful advertising and design". At the 81st Awards in 2002, Ballarat University won gold. This is the first time an Australian University has been recognised. Student Leigh Scholten art directed the winning project labelled Promotional Use Only. It was created by 27 students under Project Instructor and University Graphic Design/Multimedia Lecturer Helmet Stenzel. The book "Art Directors Annual 81st" (10171) donated to the Geoffrey Blainey Research Centre by Helmet Stenzel http://adcglobal.org/awards/Brass cube - polished surface. Four cork pads on base."University of Ballarat" - presumably the recipient of award. Symbol on top - letters "A" and "D". Logo for Art Directors. "The Art Directors Club 81st Annual Awards" at bottom of side Manufacturer's label on base - "Simba Awards Ltd.46-44 11th St, Long Island City, NY 11101. Phone (718) 482-7822" art directors club, annual awards, advertising, design, 81st award, university of ballarat, gold, leigh scholten, helmet stenzel, 2002, art directors club annual awards

Sauce came in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape and size of the bottles changed as did the stopper used to seal it.Historical: Change of bottles - shape, size, stopper, embossing Aesthetic: Display showing shape and embossing.Medium sized clear glass sauce bottle with straight sides two thirds of the way up then tapering to the neck and opening. Sealed by cork which is loose inside the bottle. Embossed at the base. Base: Common Seal 'A' with 'G' at top and 'M' below inside the A. Underneath and across the middle 'M559' and beneath 'M' '211' on edgeglass bottle, sauce, household

The event was started by Michelle Ryan in memory of her mother "Tupps" Ryan, who was a long time resident of the town. Winners are: Women: 1996 L Bourke 84, 1997 I Younis 77, 1998 F Rundle 79, 1999 L Bourke 73, 2000 P Roberts 80, 2001 L Loader (9 holes) 42, 2002 I Younis 78, 2003 E Willox 81, 2004 F Rundle, 2005 F Rundell 72, 2006 M Hesketh 69, 2007 M Hesketh 84, 2008 F Rundle 83, 2009 F Rundle 79, 2010 F Rundell 81, 2011 M Hammond 89, 2012 M Hammond 82, 2013 K Robertson, 2014 K Burl, 2015 T Cartledge, 2016 J Walsh, 2017 T Cartledge 2018 K Hammond. Men 1996 W Couch 66, 1997 W Dumesny 66, 1998 A Klemn 73, 1999 W Couch 64, 2000 D Smith 69, 2001 D Bradshaw (9 holes) 30, 2002 D Bradshaw 68, 2003 D Bradshaw 65, 2004 P Plozza 63, 2005 D Bradshaw 78, 2006 W Dumesny 62, 2007 P Plozza 66, 2008 B Dumesny 68, 2009 L Smith 70, 2010 B Dumesny 73, 2011 B Norton 75, 2012 A Haberfield 73, 2013 W Dumesny, 2014 W Dumesney, 2015 J Mckenzie, 2016 B Dumesny, 2017 H Huffadine, 2018 B Hammond. Significant as it records the successive winners and their scores. It is an ongoing memorial to "Tupps" Ryan who was a stalwart of the town.Wooden base with sculpted central column with two side wings with a gold painted golfer on top. Glued to the front is a representative ball, flag and hole.Inscribed on the base " The Michelle Ryan Day Stroke Event sponsored by the Rylance Family. The winners and score are inscribed onto individual plates attached to the front and back of the "wings"peterborough, golf, peterborough golf club, michelle ryan day

Swivel mirror mounted medium brown, wooden mantle stand with 2 drawers in base, Drawers are lined with green and yellow floral paper. Drawer fronts are rounded wood; one drawer has a front piece missing. Wooden uprights are a decorative, curved shape. Base has 4 round, turned wooded feet (5th foot now detached, was located in centre front between drawers). Mirror has lost its reflective coating around edges. It rests, at about 70 degree angle, on metal bracket. Marking on base in black crayon “6 2”, and pencil letters on 1 drawer “& &”, and “S S” (or “”S 8”). flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, mirror, dresser mirror, furniture, 19th century, bedroom furniture

This hospital equipment was used in the Tawonga District General Hospital which was built in the 1950s specifically for the increase in population due to the Kiewa Hydro Scheme.Historical: Shows the development of scientific hospital equipment. Provenance: Used in the Tawonga District General Hospital which was remote.White ceramic urinal bottle. Sits on a flat base with a hollow sphere above it reaching out to a hollow cylinder with a handle on top. Used by male patients who were unable to use the toilet facilities, following surgery or a severe illness.Under the base: R. FOWLER LIMITED / FOWLER WARE / AUSTRALIA and UKV 269 sticker Is chipped at the openinghospital equipment, tawonga district hospital, mt beauty hospital

A black and white photograph which shows a woman walking along the track that leads to the base of Steavenson Falls.A black and white photograph which shows a woman walking along the track that leads to the base of Steavenson Falls. The Steavenson Falls is named after the Victorian Assistant Commissioner of Roads and Bridges, John Steavenson who arrived in Victoria in the early 1860s.steavenson falls, marysville, victoria, waterfalls

This is a photo of a camps site at the base of Mackeys Peak. The Willoughby's are camped on the left, The Barnes in the centre and the Hines on the right (presumably the people in the photo are from these family groups).The photo shows tents in a clearing in bush.There is a large tent to the right with a man and a young child in front of it, another tent or structure can be seen on the left with a group of four adults and two children lined up in front of it. A buggy can be seen in the bush in the centre.Camp at base of Mackey's peak, Willoughby's camp, Barnes Camp Hines Camp, written in pen on back of mount.recreation, camping, scenery, grampians ranges

This bottle holds one imperial pint. The manufacturer John Sutherland & Sons began production in Melbourne in 1885 and ended production in the 1970s. This bottle was made with a 3 piece mould. 2 pieces for the bottle proper and a third for the base. The side mould seams extend right through the lip, so this was not applied separately. The type of A G M mark on the bottom indicates it was made during the 1929 to 1933 period. It displays some stretching in the glass on the neck as it was taken from the moulds whilst still somewhat plastic, not having cooled enough. Overall the bottle in excellent condition.Clear glass bottle, embossed inscription, AGM mark on base.Embossed inscription: "John Sutherland & Sons Pty Ltd Melbourne Pickles"glass bottles, john sutherland & sons, pickle bottles

With numbers increasing, the 3RPH began printing their own paper badges rather than relying on metal ones. The blank template could then be modified with a name, if desired. In this example, a laminted card is attached to a metal and plastic clip. The front of the badge has a person facing upwards to a microphone whilst sound waves radiate around them. To the right of this symbol are the words 'Association for the Blind', '3RPH 1629' and then 'Radio for the Print Handicapped' above the name of the badge holder. The wearer's name is then embossed in Braille at the base of the badge on a blue background. This badge was donated by Marjorie West.Large badge with white background and black writing and braille at the baseAssociation for the Blind 3RPH 1629 Radio for the Print Handicapped Marjorie West badges, association for the blind