Triangular shaped mask with hinged arm at point of triangle that connected to upper wire section via a hook. Known as Murray's Mask and used for the administration of chloroform. Mask is covered with linen (gauze) cloth onto which chloroform would be dropped.mask, murray, chloroform

Hurley, Sir Thomas Ernest Victor (1888-1958) was gifted this Probyn Williams inhaler in 1914. After studying at Melbourne University, Victorian-born Hurley was a Medical Officer at the Royal Melbourne Hospital until he commenced private practice in Collins Street. He was appointed Captain Australian Army Medical Corps, AIF and served in Gallipoli with the 2nd Field Ambulance. He served in Enypt, London, and the Western Front during World War 1. He gained a Companion of the Order of St George and St Michael in 1917. Upon return to Melbourne he held positions such as surgeon to Victoria Police (1928-1956), elected to Council of the Victorian branch of the British Medical Association, member of the Charities Board of Victoria and foundation member of the Royal Australasian College of Surgeons and chaired the Flying Personnel Research Committee m a consulting surgeon at the Royal Melbourne Hospital. This apparatus is transitional between Clover's and Hewitt's having Clover's narrow "ways" and compact size, but using Hewitt's ether-control lever.Black round topped box with brass hooks [missing] at front and brass hinges at rear. The initials T.E.V.H. are printed in gold leaf on the front. There is a black fabric handle on the top. Inside the box is black padding with the manufacturer's logo printed in gold leaf. There is a square section in the base of the box for holding the square clear glass bottle for ether. The pear-shaped mask is made of metal. There is also a metal ether measure for pouring the ether. The metal inhaler is ovoid shaped. The rotating gauge has a series of numbers engraved onto the inhaler for measurement. There is an elbow joint attaching a re-breather bag, with a small amount of waxy paper remaining attached with a thin ribbon. There is a small glass bulb encased in a metal housing. Printed in gold leaf on front of box: T.E.V.H. •Printed in gold leaf on inside lid of box: MAYER & MELTZER / LONDON / MELBOURNE & CAPE TOWN •Engraved on side of inhaler: PRESENTED / TO / T.E.V. Hurley Esq.,M.D.M.S. / by / THE M.S.S. / 15.6.14. •Engraved on reverse side of inhaler: PROBYN WILLIAMS / ETHER INHALER •Moulded into connector on elbow joint: MAYER & MELTZER •Stamped into base of metal pourer: MAYER & MELTZER / LONDON •Blue sticker with white printed text on front of inhaler: O.2.21.hurley, thomas ernest victor, probyn williams, university of melbourne, world war 1, wwi, gallipoli, australian army medical corps, medical student society, mayer & meltzer, clover, joseph, hewitt, fredrick william

Dr. Joseph Clover (1825-1882), an English physician, first described his Portable Regulating Ether Inhaler on Jan. 20, 1877. Clover was an especially sought after anesthesiologist and early pioneer in the specialty. This was the best-known of many inhalers that Clover designed. The dome-shaped reservoir was turned to points on a control dial to gradually increase or decrease the percentage of the air that passed over the ether. Several inventors based new inhalers on this, while the original continued to be manufactured as late as the beginning of WWII. (Source: Wood Library Museum)Black round topped box with brass hooks at front and brass hinges at rear. There is a black fabric handle on the top. Inside the box is black padding with the manufacturer's logo printed in gold leaf. There is a square section in the base of the box for holding the square clear glass bottle for ether. There is also a dome-shaped metal inhaler with a "whistle tip" type connection to the mask. The mask is made of tan leather. There is also a metal ether measure for pouring the ether.Printed in gold leaf inside lid of box: MAYER & MELTZER [?] PORTLAND ST. / MAKERS •Engraved on side of inhaler: Mayer & Meltzer / London •Stamped on connector of inhaler: MAYER & MELTZER RN NO 212327 •Engraved on rear of inhaler: Clover's Inhaler •Printed in white on blue sticker: O.2.5A •Measurements have been stamped on the bottom of the inhaler. •Printed in black ink on mask: MADE IN ENGLAND •Stamped on metal connector inside mask: 6 •Printed in black ink on white manufacturer's label on glass bottle: ETHER PURUS '720 / H. Francis & Co., Melbourne.clover, joseph, mollison, crawford henry, george bankin, mccaul, kevin, royal women's hospital, coroner, freemason, surgeon, gynaecologist, obstetrician, mayer & meltzer, francis & co, melbourne, ether purus

Magill's laryngoscope with open straight blade and flat round speculum and a detachable light bulb connector, the bulb is missing. This laryngoscope is a previous version of the battery use ones conceived around 1920 therefore circa 1900. The design of the handle is similar to the Shipway laryngoscopes with a curved and pointed end and anatomical handle grip. The blade attachment place seems to be an adaptation to this kind of blade which differs from original models. The piece has several scratches and deep hit marks, as well as oxidation spots mostly around the internal canal of the blade. There is presence of resin residues on some surfaces. A visible different kind of metal was used at the blade base attachment place and for the light bulb connector. Engraved on handle its model type and in the arm of the handle a possible manufacturer name (illegible) and the place where it was made.Engraved at the handle, MAGILL'S LARYNGOSCOPE. Stamped at the arm of the handle back side, STAINLESS STEEL Stamped at the arm of the handle front side, A[not understandable text might be Allen & Hanburys Ltd.] / LONDON / JZmagill, ivan, laryngoscope, 1900, resin, shipway, light bulb, magill laryngoscope

Army green, two pocket narrow case for a rifle bipod. The main pocket is for the bipod, the top pocket has a zip closure and is used for rifle accessories. There is a metal slide web belt attachment on the back of the case, there is also an additional webbing attachment with a push clip closure. The top closure flap is secured with two push clip closure.CASE CARRYING BIPOD XM3 DSA 100-38-C-1457 1005-899-2430 US Inside top flap closure: 3 Outside top flap: USpasschendaele barracks trust, carrier, bipod usa

Steel box holding syringe parts. There are four hollow metal rods resting in metal clasps attached to a baseboard inside the tin. Some of the rods appear to have metal wire threaded through (purpose unknown). There are a number of clasps attached to the baseboard and top-plate which indicate syringes would have been housed there.Maker's mark stamped into tin: THACKRAY / LEEDShospital, medicine, anaesthesia

"Y" shaped hollow metal tubing with a red rubber stopper at the intersection of the "Y".ether, anaesthetic, hospital, surgery, medicine

Stainless steel box containing a baseboard with clips to hold objects in place, a glass syringe with metal tip and glass plunger, along with two stainless steel syringe points.medicine, hospital, anaesthesia

Glass syringe with metal plunger and a three finger grip. There is red printed text on the barrel, including measurement lines for drawing up to 10cc of liquid. The nozzle is offset, not in the centre.anaesthesia, medicine

This is a large metal framework covered in gauze, the whole mask completely enclosing the patient's face excluding any possibility of carbon dioxide being excreted. This object was found in the possession of the Italian Army in Libya in 1940, and donated to the museum by Dr Geoffrey Kaye. Gustave Julliard, of Geneva, after a death from chloroform had occurred in his practice, abandoned the use of that anaesthetic and adopted ether. He administered it from a large, wire frame, the outside of which was covered with waxed cloth to make it impermeable to air, the inside with surgical gauze on to which the ether was poured. Large metal wire frame mask, covered in waxed paper, with gauze wrapped around the rim to prevent ether leaking out, effectively forming a rebreathing apparatus.ether, carbon dioxide, italian army, libya, 1940

Dr. Allen De Vilbiss (1841-1917) of Toledo, Ohio, developed his first atomiser around 1887. This device was designed to allow for dissolving cocaine, as a local anaesthetic agent, in oil, and spraying into the nose and throat. In the early to mid 20th Century, The DeVilbiss Company began making perfume atomisers instead of medical ones. Red, heavy cardboard box with manufacturer's label at one end, containing a glass bottle with metal spray attachment, and a khaki rubber bulb for pumping liquid through the atomiser.Stamped into top of metal atomiser: DE VILBISS TOLEDO USAatomiser, local anaesthetic

A funnel, held above the patient's face, was almost the standard of giving oxygen until c.1930. It was quite useless, enriching the inhaled atmosphere by only about 3% of oxygen.Clear dimpled glass in the shape of a funnel, with red strong running through the centre, and tied to one side.oxygen, oxygen therapy, funnel, cig, commonwealth industrial gases

The Sydney Homeopathic Dispensary was established in July 1858. At a time when medicine was become more scientific and evidence based, homeopathy relied on the Galenic tradition to treat patients.Wooden box with two drawers secured by a brass pin inside top lid, containing a variety of homeopathic substances. Some of the cork tops are missing, others are broken but sealed. Some of the cork tops have the abbreviated name of the contents on them.Printed in gold leaf on the inside of the lid: JOHN BELL. / HOMEOPATHIC CHEMIST. / GEORGE STREET / SYDNEY.homeopathy, galen, homeopathic, galenic

The Porton resuscitator was devised in 1951 at the British Chemical Defence Experimental Establishment in Porton, Sailsbury, as a bellows-valve-mask resuscitator. Extensive testing was undertaken over eight years, with the device being successfully used for air transport of polio patients, for emergency resuscitation in hospital wards, and by hospital orderlies.Black rubber mask attached to a black concentina bag with a round metal filter at the end. Sits in its original wooden box with perspex lid. Instructions of use displayed on each side of the box. [white print on black rubber concertina bellows] PR 504 / P.B.C. 22 / - SEPT 1962resuscitator, porton

Green case with lock at the front and plastic green handle on top with a manufacturer's label stuck on top. Inside the case is divided into three separate section, one containing a clear plastic mask with latex cushioning, the second containing a grey resuscitation bulb and the third containing a smaller clear plastic mask with latex cushioning, still in original packaging.Green manufacturer's label on top of case: THE CIG AIR-VIVA RESUSCITATOR Inside case: Original label 'Operating Instructions'ambu, resuscitator, cig air-viva

Prior to the first antivenom development in Australia, many of the snake men had a vast array of snakebite remedies they either used for themselves in the case of bites or pedaled to the public. Treatments such as ammonia, strychnine, chlorinated lime, potassium permanganate, suction caps, alcohol, gunpowder, petrol, toad urine, iodide swabs and pig face plant juice were some that were used and sold. The first antivenom produced in Australia was in 1930 for tiger snake bites. Subsequently, in response to public pressure, other antivenoms were produced. Taipan, 1955; Brown snake, 1956; Death Adder, 1958; Papuan black snake, 1959; Sea snake, 1961; and the polyvalent, 1962.Black box with hinged opening and gold leaf printed text on the top. Inside the box is lined with blue satin and velvet, and contains one (1) syringe with glass chamber and metal plunger and black rubber stopper, one (1) glass bottle with a label stating it contains chloride of lime, one (1) glass bottle with a label stating it contains pure alcohol and two (2) needles with metal connectors, one of which is broken. There is also a small wooden block with a groove in the top of it.Gold lettering on top of box: CHLORIDE OF LIME ANTIDOTE / FOR / SNAKE BITE / FELTON GRIMWADE & CO. / MELBOURNE.hydrochloride lime, alcohol, antidote, venom, snake bite

Two ammunition 30 rounds magazines for an Armalite rifle. Made of metal and constructed with a slight curved shape. The magazines are spring loaded to force the rounds into the rifle breech. Both 1. & 2. are exactly the same qualities.passchendaele barracks trust, rifle, magazine, armalite

Long narrow khaki holdall carry bag, most likely used to carry maps or documents.N. TUPPERpasschendaele barracks trust, holdall, carry bag

The Dräeger Pulmotor was developed in 1907. It addressed previous concerns about lung injury, by limiting both the inspiratory and expiratory pressures. Although still controversial, the Pulmotor was widely distributed and commercially successful. Oxygen from cylinders provided both the inspiratory gas flow and the driving mechanism. Expiration was an active process and gases were sucked from the lungs by negative pressure created by a Venturi effect. This device came with a facemask and harness, with a caution that the operator should take care to prevent air entering the stomach.Draeger resuscitation kit, inside wooden case with handle. Case contains small heavy gas cylinder with large beige handwritten 'S. M E' inscription on one side. Due to water damage case missing pieces of plywood in corner and floor of case bubbled and swollen.|Rubber decomposed rigidinspiratory, expiratory, pulmotor, negative pressure

1. Multi purpose carry pouch, khaki with over the shoulder carry strap. 2. Small metal oil bottle. 3. Multi purpose repair tool, with hammer, spanner and slide-out adjusting tools. 4. Metal container, with firing pins, springs and keys. 5. Rope barrel pull though. Each item has its own sewn-in storage pouch fitted with individual closures. On oil container; F & S LTD On metal container; TD On repair tool; NIC -passchendaele barracks trust, kit, armour's tool kit, bren gun

WW21. Army green wooden carry box LAWRENCE & HANSEN 1943. 2. Aiming light and cable for power. 3. Chain link and clip. 4. Nylon cord wrapped around winder and clip.LAMP AIMING M GMk III LAWREENCE & HANSON 1943passchendaele barracks trust, lamp, aiming, machine gun

1. Four pouch magazine and ammunition carrier, each compartment has its own closure flap and closure point. There are 3 magazine compartments and one compartment for 9 mm ammunition. 2. Slightly curved metal ammunition magazine, this magazine has been damaged and made inoperable.4051 - 66 - 021 - 1997 CGCF ^ 1986 (Both markings are open to interpretation).passchendaele barracks trust, holder, magazine, f1 sub machine gun

Khaki cleaning rod carrier with secure two position closure attachment. The carrier has reinforced outer edge stitching. On the back of the carrier there is a metal attachment to slide onto a webbing belt. The carrier has five sewn-in pockets to secure cleaning attachments.CASE CLEANING ROD. M1-C6573A.passchendaele barracks trust, carrier, rod, cleaning

Long and narrow khaki five pocket map bag. Strong reinforced outer stitching with leather closures and holding straps.BG- 56- A.passchendaele barracks trust, map bag

With the introduction of nitrous oxide for patients undergoing dental treatment, 100% nitrous oxide was usually administered as an anaesthetic. This caused the patient to lose consciousness quickly and could also cause severe hypoxia. In the late 1890s, dentist Samuel Stockton White introduced this two cylinder apparatus, which could administer oxygen with N2O.Early model apparatus with cast iron stand, and two gas bottles. Comes with two canvas gas bags and a detached metal mask and fabric connecting tube.samuel stockton white, nitrous oxide, oxygen, hypoxia

The advent of anaesthesia posed immediate problems for the oral surgeons and dentists who were used to operating on awake patients with intact airway reflexes. Early anaesthetics were very light and often created an uncooperative patient. Dentists were quick to complain they had trouble opening the mouth quickly enough and dental props soon made an appearance. Gags and tongue depressors proliferated, all initially devised to improve surgical and anaesthetic access, not to protect the airway. Other instruments for opening the jaws included the somewhat fearsome devices known as mouth openers. Heister's mouth opener was incorporated in anaesthetic practice but was not designed for this purpose. Lorenz Heister (1983 - 1758) used his device for mouth inspection and for operations on the palate, tonsils and teeth in the pre-anaesthesia era. He was not impressed with the way it was used by others in his life time and believed that it overstretched the jaw when used inappropriately. Despite its apparent brutality, the Heister mouth gag was still advertised for sale in 1983 and its useful mechanism has been incorporated into modern surgical retractors.Steel cork-screw shaped object with a twist top handle which will force the two arms apart. Each arm has ribbing toward the end to create friction when inserted in the mouth.Stamped into the twist top handle: MAYER & MELTZERheister, mouth gag, mouth opener

Sir Frederick William Hewitt was a great advocate of nitrous oxide anaesthesia, mainly for short procedures. In 1885, he reviewed the methods of administration and concluded that accurately fitting valves were essential at the commencement of the inhalation, in order to ensure the rapid washout of air from the lungs; and there was a distinct advantage in allowing some rebreathing of nitrous oxide towards the end of inhalation. He thus devised the stopcock. The stopcock consists of a cylinder with two rotating sleeves and two rubber flap valves. The arrangement allows air to be breathed either through the valves or rebreathed to and from the bag; nitrous oxide to be breathed either through the valves from the bag and out to the atmosphere or rebreathed to and from the bag. Soon after the introduction of this stopcock, there was an increased interest in administering oxygen in combination with nitrous oxide.Amber coloured ether inhaler, with leather mask, celluloid shield and inflatable cushion with attached Hewitt's stopcock.hewitt, stopcock, celluloid, ether, inhaler, mask, rebreathing

This is a simple metal mask with an ether chamber surmounting it. The patient breathes air down through the variable orifice over the surface of ether and in through the variable orifice over the surface of ether and in through the inspiratory valve. Exhalation was by means of the expiratory valve placed in the centre of the mask. All channels are extremely small and would offer considerable resistance to respiration.Metal inhaler with shaped rim edgeEngraved by hand into side of mask: DEWEE'S ETHER / INHALER.. 1901. Stamped into side of mask: J.E. LEECO / PATD. NOV. 12-1901 / 400ether, inhaler, ramsay, dewee, leeco

The Bellamy Gardner mask was in use by 1905 and was the first British mask for the open administration of ether. This mask combines the features of the Bellamy Gardner mask with a tower frame designed by Ogston. The Museum's "Penn catalogue", circa 1970, describes this mask: "this followed closely upon Ferguson's lead, but has an enormous amount of "dead-space" contained within the apparatus."Open wire ether mask with inner dome (Bellamy Gardner mask) and outer wire frame tower (Ogston frame).Moulded into connector clip: BRITISH MAKEbellamy gardner, ogston, open ether administration, henry peter penn

This is an early example of a cuffed pharyngeal tube. The cuffed airway was a significant development in pharyngeal tubes as it helped to protect the airway from blood and secretions. Black rubber tubing with spiral metal inner tube and red rubber pump mechanism attachedMoulded onto rubber bulb: Tycos Moulded onto rubber connector: MADE ONLY FOR PATENTEE / INDIA TYRE AND RUBBER CO / INCHINNAN / SCOTLAND Moulded into metal connection: Tycos / LONDONpharyngeal, ndia rubber & tyre company, airway, cuffed, scotland, tycos