George Zoltan Lefton, a Hungarian immigrant who came to the United States in 1939, was the driving force behind Lefton China. Although he began his career in clothing and sportswear, his porcelain collecting interest led to the formation of the Lefton Company in 1940. Headquartered in Chicago, the company was a wholesale and marketer of ceramic goods. After the bombing of Pearl Harbor on December 7, 1941, Lefton helped his friend Nunome, a Japanese American, board up his business to avoid looting. When the war ended, Nunome introduced Lefton to Japanese ceramic manufacturers during the Japanese occupation. Lefton was one of the first American businessmen to work with these manufacturers. (WorthPoint)Porcelain figurine of a doctor holding a baby. The doctor has black hair, is of male appearance, and is dressed in surgical attire, consisting of a short sleeved white surgical gown and cap, brown trousers and black and white shoes. There is a glove protruding from the pocket of the gown at the left hip. The doctor is holding a baby by its ankles in his left hand, and is holding his right hand against the baby's bottom. The baby is crying. The figure is seated on the edge of a stool, and standing on a brown coloured base. There is a copyright symbol (a c inside a circle) printed on the underside of the base of the statue, along with the text 'geo.z.Lefton/THE O.B.' Sticker attached to underside of base reads 'Lefton/TRADE MARK/EXCLUSIVES/JAPAN'.obstetrics

George Tibbits, University of Melbourne. Faculty of Architecture, Building and Town & Regional PlanningIndex system that support the research for Beechworth : historical reconstruction / [by] George Tibbits ... [et al]Arranged by street names of BeechworthEach index card includes: street name and number of property, image of property, allotment and section number, property owners and dates of ownership, description of the property according to rate records, property floor plan with dimensions.beechworth, george tibbitsbeechworth, george tibbits

The photograph is of dignitaries attending the opening of the 1st International Domiciliary Nursing Congress hosted by RDNS. Mrs. Hallenstein is President of RDNS and Dame Ivy Wedgwood and Lady MacKenzie, M.B., B.S., are on the RDNS Committee. Lady MacKenzie agreed to be the Congress Convener. The 1st International Domiciliary Nursing Congress was hosted by Royal District Nursing Service (RDNS). Mrs. D.(Elsa) Hallenstein, President of RDNS, presided over the opening ceremony with the Prime Minister of Australia, the Hon John Gorton opening the Congress. It was held in Melbourne and ran from the 1st to the 8th of February 1970. The theme of the Congress was "Domiciliary Nursing in a Changing World". Many delegates came from around Australia and overseas; from the World Health Organisation; from the North American continent; from Europe, from Asia and from the Pacific. .Black and white photograph of Australia's Prime Minister, the Hon John Gorton, with Royal District Nursing Service (RDNS) dignitaries, all are standing. On the far left of the photograph is Dame ivy Wedgwood, who is wearing glasses, and has a light coloured close fitting hat covering most of her short dark hair; she is wearing a black frock with a white badge on its upper left. A black bag hangs from her left arm and her hands are clasped in front of her. She is looking to the left. Mrs. D. Hallenstein is to her right. She has a dark close fitting hat covering most of her light coloured hair; is wearing a dark coloured patterned frock with a badge attached to its upper left and is wearing a necklace. Her white gloved hands holding her glasses are at the level of her waist. To her right, partially seen, is Mrs. Gorton, who has wavy blonde hair and is wearing a white checked frock. Next to her, partially seen, is the Hon John Gorton who has dark hair and is wearing a dark suit. Next to him, and to the far right, is Lady MacKenzie who is wearing glasses and has a grey hat over her light coloured hair. She is wearing a light coloured jacket and skirt and is holding a white handbag in her gloved left hand. The group are standing by glass doors and trees can be seen in the background. Photographers stamp. Quote No. JD 64royal district nursing service, rdns, 1st international congress on domiciliary nursing, mrs d. (elsa) hallenstein, mrs gorton, hon john gorton, dame ivy evelyn annie wedgwood, lady mackenzie

This item wasused before diesel, electric and battery drilling apparatus were used by farmers, and other trades requiring a portable yet reliable method of drilling holes. As this item is a 3/4 inch hole drill it would be suitable for fencing and providing holes for structural studs. As with all outdoor farm equipment, man power was required (be it the farmer or farm hands). Fitness of the operator was at a high standard but protective gloves were not highly thought of as it was before occupational, health and safety regulations became mandatory over all manual handling activities, be they on rural properties or town/city factories. This period was one where the male ego was at its pinnacle i.e. the harder the tasks the more of a man was required. Hard manual work was not only the "way to go" but also a necessity. Evolution of cheap portable electric/battery powered tools opened up a more efficient method available, especially to those with less muscle strength. This item personifies the rugged environment of the rural workplace. The Kiewa Valley with its main emphasis on farming and grazing provided ample opportunity to use this construction implement. The manufacturer being a Scottish tool company is very significant in the era when this hole maker was in high demand. British steel products were of high grade and had a good record of reliability. The reliability of any tool was a solid factor for farmers and tradesmen in this semi-isolated region (Circa early 1900s) within the Kiewa Valley and its regional area. This factor,although not as crucial, post 1960s, when Asian manufacturers entered the market place and produced cheaper tools and transportation and supplies was more frequent and reliable, the need for the more expensive British made tools diminished considerably. After the influx of tradesmen from war torn Europe (post 1945) and the increased availability of tradesmen in the Kiewa Valley and its region the price of tools was and still is not as crucial and the cost of all required tools has become a minimal part of the equation. It is only with the emerging younger trades person, farmer and grazier, who have more, "one eye on production costs" and no "old ties to the motherland" inert mind set that quality tools such as this auger and other hand tools "must be made to last a life time" is no longer part of the modern work environment.This cast iron, hand operated Auger has a short barrel shaped cylinder at one end (known as the "Eye") and at the other end a Helical screw blade (screws the cutting edge into wooden material, thereby creating a hole 3/4 inch diameter in the wood) . The barrel section at the top permits a metal or wooden leverage plank to be inserted. The main rod has a 180mm long cutting/screw blade running from the bottom up towards the "eye" end. From the end of the screw blade to the handle is 380mm and cylindrical, but this changes at 550mm from the "eye" end to a 14mm x 10mm rectangular shape shaft.This shaft end is welded to the "Eye".On the shaft below the "eye" is stamped " MATHESON GLASGOW" on the front side and a spade (cards) symbol on the back.auger, hand drill, fencing, tool, rural trades, brace & bit

This item was before diesel, electric and battery drilling apparatus were used by farmers, and other trades requiring a portable yet reliable method of drilling holes. As this item is a 3/4 inch hole drill it would be suitable for fencing and providing holes for structural studs. As with all outdoor farm equipment, man power was required (be it the farmer or farm hands). Fitness of the operator was at a high standard but protective gloves were not highly thought of as it was before occupational, health and safety regulations became mandatory over all manual handling activities, be they on rural properties or town/city factories. This period was one where the male ego was at its pinnacle i.e. the harder the tasks the more of a man was required. Hard manual work was not only the "way to go" but also a necessity. Evolution of cheap portable electric/battery powered tools opened up a more efficient method available, especially to those with less muscle strength.This item personifies the rugged environment of the rural workplace. The Kiewa Valley with its main emphasis on farming and grazing provided ample opportunity to use this construction implement. The manufacturer being a Scottish tool company is very significant in the era when this hole maker was in high demand. British steel products were of high grade and had a good record of reliability. The reliability of any tool was a solid factor for farmers and tradesmen in this semi-isolated region (Circa early 1900s) of the Kiewa Valley and its regional area. This factor,although not as crucial, post 1960s, when Asian manufacturers entered the market place and produced cheaper tools and transportation and supplies was more frequent and reliable, the need for the more expensive British made tools diminished considerably. After the influx of tradesmen from war torn Europe (post 1945) and the increased availability of tradesmen in the Kiewa Valley and its region the price of tools is not as crucial and the cost of all required tools has become a minimal part of the equation. It is only with the emerging younger trades person, farmer and grazier, who have more, "one eye on production costs" and no "old ties to the motherland" inert mind set that quality tools such as this auger and other hand tools "must be made to last a life time" is no longer part of the modern work environment.This cast iron hand operated drill, has a short barrel-shaped cylinder, known as "the eye" welded across the main rod and is 30mm in circumference. It also has a hole drilled to allow a screw to be fastened onto the hand stock ( not available).The main rod is solid for 400mm and then has been flattened and coiled (Helical screw blade) for another 200mm. At the end of the larger screw blade there is a smaller gauged starter blade with a pointer thread 15mm long. This Auger produces a 1/8th inch hole (metric measurement not used at time of manufacture) See KVHS 0469 for 3/4 inch hole and KVHS 0471 for another 1/8th inch hole.A number 5 stamped on the flat sideauger, hand drill, fencing, tool, rural trades, brace & bit

This item was before diesel, electric and battery drilling apparatus were used by farmers, and other trades requiring a portable yet reliable method of drilling holes. As this item is a 3/4 inch hole drill it would be suitable for fencing and providing holes for structural studs. As with all outdoor farm equipment, man power was required (be it the farmer or farm hands). Fitness of the operator was at a high standard but protective gloves were not highly thought of as it was before occupational, health and safety regulations became mandatory over all manual handling activities, be they on rural properties or town/city factories. This period was one where the male ego was at its pinnacle i.e. the harder the tasks the more of a man was required. Hard manual work was not only the "way to go" but also a necessity. Evolution of cheap portable electric/battery powered tools opened up a more efficient method available, especially to those with less muscle strength.This item personifies the rugged environment of the rural workplace. The Kiewa Valley with its main emphasis on farming and grazing provided ample opportunity to use this construction implement. The manufacturer being a Scottish tool company is very significant in the era when this hole maker was in high demand. British steel products were of high grade and had a good record of reliability. The reliability of any tool was a solid factor for farmers and tradesmen in this semi-isolated region (Circa early 1900s) of the Kiewa Valley and its regional area. This factor,although not as crucial, post 1960s, when Asian manufacturers entered the market place and produced cheaper tools and transportation and supplies was more frequent and reliable, the need for the more expensive British made tools diminished considerably. After the influx of tradesmen from war torn Europe (post 1945) and the increased availability of tradesmen in the Kiewa Valley and its region the price of tools is not as crucial and the cost of all required tools has become a minimal part of the equation. It is only with the emerging younger trades person, farmer and grazier, who have more, "one eye on production costs" and no "old ties to the motherland" inert mind set that quality tools such as this auger and other hand tools "must be made to last a life time" is no longer part of the modern work environment.This cast iron hand operated drill, has a short barrel-shaped cylinder, known as "the eye" welded across the main rod and is 30mm in circumference. It also has a hole drilled to allow a screw to be fastened onto the hand stock ( not available).The main rod is solid for 400mm and then has been flattened and coiled (Helical screw blade) for another 200mm. At the end of the larger screw blade there is a smaller gauged starter blade with a pointer thread 15mm long. This Auger produces a 1/8th inch hole (metric measurement not used at time of manufacture) See KVHS 0469 for 3/4 inch hole and KVHS 0470 for another 1/8th inch hole.auger, hand drill, fencing, tool, rural trades, brace & bit

Sad-irons or "solid" irons were made by blacksmiths and used to smooth out material by pressing the hot iron over it. A piece of sheet -iron was placed over the kitchen fire and the irons placed on it could be heated whilst remaining clean of ash.. The women used 2 irons - one heating while the other was used. Thick cloth or gloves protected their hands from the hot irons. The handle was removed from the cool iron and re- attached to remove the hot iron from the fire. The cool iron was replaced on the fire or stove to heat again. These irons were cleaned with steel wool to prevent them marking the material. If the iron was too hot the material would scorch. Most homes set aside one day for ironing and some large households had an ironing room with a special stove designed to heat irons. However, most women had to work with a heavy, hot iron close to the fireplace even in summer.The Curtis family were early settlers in Moorabbin Shire c1880 and used sad ironsA small, curved, flat iron, with attached handle, used for cuffs, collars and frillsSILVESTER'S/ PATENT/ SALTERS / No 3 with the pretzel & a arrow going through the centresad iron, kitchen equipment, pioneers, early settlers, market gardeners, sewing, craftwork, clothing, moorabbin, brighton, bentleigh, fireplaces, stoves

Sad-irons or "solid" irons were made by blacksmiths and used to smooth out material by pressing the hot iron over it. A piece of sheet -iron was placed over the kitchen fire and the irons placed on it could be heated whilst remaining clean of ash.. The women used 2 irons - one heating while the other was used. Thick cloth or gloves protected their hands from the hot irons. The handle was removed from the cool iron and re- attached to remove the hot iron from the fire. The cool iron was replaced on the fire or stove to heat again. These irons were cleaned with steel wool to prevent them marking the material. If the iron was too hot the material would scorch. Most homes set aside one day for ironing and some large households had an ironing room with a special stove designed to heat irons. However, most women had to work with a heavy, hot iron close to the fireplace even in summer.These sad irons remind us of the difficult circumstances experienced in their daily routines by the pioneers and early settlers of Moorabbin Shire. The family of Miss M Curtis were early settlers in Moorabbin Shire. Sad-iron, domestic, flat, cast iron, Silvester's Patent, No 6, Salter, England, c. 1890-1900s A sad iron made from cast iron was heated over a fire or on a stove and used for pressing clothing and table wareSILVESTER'S/ PATENT/ SALTERS / No 6 with the pretzel & a arrow going through the centresad iron, kitchen equipment, pioneers, early settlers, market gardeners, sewing, craftwork, clothing, moorabbin, brighton, bentleigh, fireplaces, stoves

Sad-irons or "solid" irons were made by blacksmiths and used to smooth out material by pressing the hot iron over it. A piece of sheet -iron was placed over the kitchen fire and the irons placed on it could be heated whilst remaining clean of ash.. The women used 2 irons - one heating while the other was used. Thick cloth or gloves protected their hands from the hot irons. The handle was removed from the cool iron and re- attached to remove the hot iron from the fire. The cool iron was replaced on the fire or stove to heat again. These irons were cleaned with steel wool to prevent them marking the material. If the iron was too hot the material would scorch. Most homes set aside one day for ironing and some large households had an ironing room with a special stove designed to heat irons. However, most women had to work with a heavy, hot iron close to the fireplace even in summer. These sad irons remind us of the difficult circumstances experienced in their daily routines by the pioneers and early settlers of Moorabbin Shire The family of Miss M Curtis were early settlers in Moorabbin Shire. A) A heavy cast iron, flat iron with B) horseshoe shaped trivet stand c1880 The trivet can be attached to a table by an adjustable clamp.A) 5 on tip of ironsad iron, kitchen equipment, pioneers, early settlers, market gardeners, sewing, craftwork, clothing, moorabbin, brighton, bentleigh, fireplaces, stoves

Sad-irons or "solid" irons were made by blacksmiths and used to smooth out material by pressing the hot iron over it. A piece of sheet -iron was placed over the kitchen fire and the irons placed on it could be heated whilst remaining clean of ash.. The women used 2 irons - one heating while the other was used. Thick cloth or gloves protected their hands from the hot irons. The handle was removed from the cool iron and using the lifter the cool iron was replaced on the fire or stove to heat again. These irons were cleaned with steel wool to prevent them marking the material. If the iron was too hot the material would scorch. Most homes set aside one day for ironing and some large households had an ironing room with a special stove designed to heat irons. However, most women had to work with a heavy, hot iron close to the fireplace even in summer.These sad irons remind us of the difficult circumstances experienced in their daily routines by the pioneers and early settlers of Moorabbin Shire. The Curtis family were early settlers in Moorabbin ShireA) This heavy sad iron, made from cast iron, was heated over a fire or on a stove and used for pressing clothing and haberdashery. B) The separate tapered handle was used to lift the hot iron from the fire and when a "Potts" Handle was attached the ironing commenced. sad iron, kitchen equipment, fireplaces, stoves, pioneers, early settlers, market gardeners, sewing, craftwork, clothing, moorabbin, brighton, bentleigh

This photo dates from circa 1896. It depicts Mrs Sarah Ann Milford, then aged 65, in a buggy somewhere in Castlemaine. Mrs Milford is holding the reins in gloved hands, having driven five miles into town from her home on the Faraday Road, Harcourt. The journey would have taken about one hour. Mrs. Milford together with her farmer/orchardist husband, worked an extensive orchard/farm, Here she is depicted having delivered apples, butter and vegetables from her family orchard to Castlemaine market. Mrs Milford is wearing a strictly tailored 'must fit snug everywhere' jacket with shoulder cape, very full sleeves, closely buttoned bodice, high neckline and rather severe collar. The skirt was separate , of lined brown twill cotton, pocket at side back. A buggy rug is strapped across her knees. The buggy rug was lined with yellow and black figured damask. Despite the masculine-oriented property laws and society norms many Victorian women were active partners in their family business. The photo is a good record of the fashions, transport and capabilities of this pioneer.Sepia photograph of a woman dressed in Victorian fashion, seated in a covered four wheel buggy.The horse is equipped with light buggy harness and wearing a buggy bridle.

Black and white photo of 1937-38 Victorian Sub-District Cricket Association Premiers. Port Melbourne Cricket Club. 26 men shown, 12 in cricket clothing, named as follows: Back Row : B. ROWAN, J. TATE, J. HARVEY (Assistant Secretary), T. BOWMAN, H. CROMPTON, G. GLOVER, S. FINDLAY, W. WILSON Centre Row : F. STEVENSON (Hon. Treasurer), A. DOWNER, W. PAYNE, B. CULLEN, Cr. H. C. SOUTHWARD (President), J. WOODRUFF, E. LEE, W. J. PRICE (Hon. Secretary), A. NUGENT Front Row ; G. MOORE, B. DUNN, T. MARSHALL, T. LAHIFF (Captain), G. V. BEARD (Vice-Captain), W. JONES, A. YOUNG Seated : H. GAYsport - cricket, port melbourne cricket club, b rowan, j tate, j harvey, t bowman, h crompton, g glover, s findlay, w wilson, f stevenson, a downer, w payne, b cullen, henry carr southward, e lee, w j price, a nugent, g moore, b dunn, t marshall, tommy lahiff, g v beard, w jones, a young, h gay, jack woodruff

This photograph is showing a procedure performed by an RDNS Sister in the home of an elderly lady.Education was an integral part of Melbourne District Nursing Society (MDNS) from its inception in 1885, later called Royal District Nursing Service, (RDNS). Only Trained Nurses were employed by the Society, and on visits to patients they taught the necessity of hygiene and cleanliness, as well as the need for a good diet, to bring about good health. Doctor’s lectures were later given at the MDNS home to instruct patients and their families on prevention of disease. Education to patients continued throughout the years regarding health care and the use of equipment in the home. In 1961 Education programs commenced at MDNS with Sisters receiving In-service education. Staff could also apply for scholarships to further their education outside of RDNS. At RDNS many programs were run, including: a Post Basic Course, Cardiac Rehabilitation Nursing, Haematology/Oncology Nursing, Palliative Care program, Diabetic Stabilization Program, Leg Ulcer Management Program, HIV/AIDS Nursing Care, Cystic Fibrosis Home Support, Veterans Home Care Program, Breast Cancer Support Program, Continence Management Program, Stomal Therapy Program, In-Home Lactation Support Program and a Community Nursing Education Program extended to student nurses from hospitals and to other nursing organizations. RDNS staff attended several hospitals to observe and learn special care needed to some clients, e.g. to the Austin Hospital to learn the care required for paraplegic and quadriplegic clients at home and to Mount Royal Hospital to observe the care of clients in the rehabilitation ward.This Black and white photograph is showing Sister Liddalow, of the Royal District Nursing Service (RDNS), linking up a home dialysis unit into the left arm of an elderly lady. The lady who wears glasses and has wavy hair, is wearing a white nightdress with lace at the neck and down the centre front. Her left arm is resting on top of a surgical cover and she is clenching her left fist and has a tourniquet above her elbow. She is sitting against a flower patterned pillow on her bed watching the procedure. Sister Liddalow has short dark hair and is wearing a white gown over her uniform. She has a glove on her right hand and a syringe in her hand. In the left rear IV apparatus, with two syringes and a trolley on which a machine can be seen.date of photographroyal district nursing service, rdns, patient care - home dialysis, sister liddalow,

Walsall in England was regarded as the world`s greatest centre of the saddlery trade. The town's craftsmen began to specialise in making bits, stirrups and spurs in the Middle Ages, developing into fully-fledged makers of saddlery and harness, by the end of the nineteenth century. As a result, over a hundred firms were exporting their products throughout the British Empire and beyond. The Walsall firms flourished as horses were so vital to everyday life in Victorian Britain and the colonies. The Walsall area emerged as a major supplier of military saddlery and harnesses, with one company supplying an astonishing 100,000 saddles for the British army in the First World War. The twentieth century saw the rise of light leather goods, such as handbags, cases and gloves. With the coming of the motor car, these products became the mainstay of the Walsall leather industry. Many companies supplied this trade and Dixon tools was one, as a commercial and industrial equipment supplier to the trade. The company started in 1843 and has continued to produce tools for the leather industries up and till August 2017 when the company was dissolved.A vintage item used in the leather working industries see additional notes at end of document for clarity on how the item was used and it's importance in making leather goods.Lap Skiver has a roller missing. Painted reddish brown J Dixonflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, lap skiver, leather industries, leather making tools, tools, j dixon

Polishing irons were used for ironing collars and frills. Historical information Sad-irons (the term comes from an old word sald for solid) were made by blacksmiths and used to smooth out material by pressing the hot iron over it. A piece of sheet -iron was placed over the kitchen fire and the irons placed on it could be heated whilst remaining clean of ash.. The women used 2 irons - one heating while the other was used. Thick cloth or gloves protected their hands from the hot irons. The cool iron was replaced on the fire or stove to heat again. These irons were cleaned with steel wool to prevent them marking the material. If the iron was too hot the material would scorch. Most homes set aside one day for ironing and some large households had an ironing room with a special stove designed to heat irons. However, most women had to work with a heavy, hot iron close to the fireplace even in summer. A solid piece of cast iron, the base is triangular a shape with an eight centimetre base with curved sides coming to a point 13 centimetres from the base and is three and a half centimetres Thick. The bottom of the iron is curved. Two curved pieces two and a half centimetres wide, half a centimetre thick and six centimetres apart rise from rise up seven centimetres, between them is a two centimetre diameter and nine centimetre long hollow handle. Embossed on the iron is - 4 SILVESTERS PATENT SALTER and an arrow with a knotted rope around it. K13polishing iron, silvesters patent, sad iron

Flat irons were used for general ironing. Historical information Sad Irons (the term comes from an old word sald for solid) were made by blacksmiths and used to smooth out material by pressing the hot iron over it. A piece of sheet -iron was placed over the kitchen fire and the irons placed on it could be heated whilst remaining clean of ash. The women used 2 irons - one heating while the other was used. Thick cloth or gloves protected their hands from the hot irons. The cool iron was replaced on the fire or stove to heat again. These irons were cleaned with steel wool to prevent them marking the material. If the iron was too hot the material would scorch. Most homes set aside one day for ironing and some large households had an ironing room with a special stove designed to heat irons. However, most women had to work with a heavy, hot iron close to the fireplace even in summer. A solid piece of cast iron, the base is triangular a shape with a ten centimetre base with curved sides coming to a point 15.5 centimetres from the base and is three centimteres thick. The bottom of the iron is flat. Two curved pieces three centimetres wide, half a centimetre thick and seven centimetres apart rise from rise up eight centimetres, between them is a two centimetre diameter and ten centimetre long hollow handle. Embossed on the iron is - 4 SILVESTERS PATENT SALTER and an arrow with a knotted rope around it. K5polishing iron, silvesters patent, sad iron

Black and white photographs - 2 copiesPrinted directly below photographs, "1. overturned engine and tender at the 'dead end' which was carried away. The X indicates position of fireman McKeone when rescued. 2. View from the road. Railway accident at Ringwood". Typed below photograph, "Ringwood derailment 1902 at Wantirna Rd. underpass looking north. Maroondah Highway near trees beyond underpass". Date incorrect, should be 11 Feb 1908 (as per item 2019) - refer to The Argus article published on Wednesday 12 February 1908, page 7. Thanks to railway enthusiast Neal Glover for pointing out the error.

Photocopy of James Madden in uniform resting his right arm on a ledge and his right leg hooked behind his left leg. James is wearing a red shirt, with gold buttons and braid, dark navy pants with white sash from left to right, belt and gloves. James also has his sheathed sword being held in the crook of his left arm. His right boot indicates that he is wearing spurs.13 page typewritten letter written whilst aboard the SS. Orion on the Mediterranean Sea , 28 march 1938. The letter gives details of the sights and goods able to be purchased in the area. Small letter envelope with the name of Harcourt Granite Quarries J. Blight and Co., Proprietors, if not claimed within ten days to be returned to the Manager, printed in the bottom left corner.S. T. King Williamson Sandhurst.military, world war 2, james madden

This tunic and cap were worn by Major General H H (Tack) Hammer CBE DSO & Bar, ED when Honorary Colonel 8th/13th Victorian Mounted Rifles Regiment 1959-1960 Hammer had pre-WWII service with 8th Battalion and 17th Light Horse (Machine Gun) Regiment. He served with the 6th Division in North Africa and Greece before becoming Commanding Officer of 2nd/48th Battalion. On return from the Middle East, Hammer commanded the 15th Brigade throughout two years of fighting in New Guinea and Bougainville. After the war, Hammer became Commissioner for Repatriation in Victoria and continued his military career in the Citizens Military Forces, commanding the 2nd Armoured Brigade and later 3rd Division. Open-neck officer's 'Blues' tunic with gold braided general's epaulettes and Major General's embroidered badges of rank; gilt general's buttons; red and gold braided aiguillette and white gloves. Uniform worn by Major General H H (Tack) Hammer when appointed as Honorary colonel of 8th/13th Victorian Mounted Rifles. Medals awarded to Major General Hammer are Commander of the British Empire (CBE), Distinguished Service Order (DSO), Mentioned in Despatches (MID), 1939-45 Star, Africa Star, Pacific Star, Defence Medal 1939-45, British War Medal, Australian Service Medal 39-45, Queen Elizabeth Coronation Medal, Efficiency Decoration (ED). General's peak cap with gold bullion hat badge and double row of oak leaves on peak. Medals on display are replica.8/13 vmr, military, hammer, honorary, colonel, general, world war two, wwii, cmf

Portland Town Council. Opalotype or opaltype is an early technique of photography. Opalotypes were printed on sheets of opaque, translucent white glass; early opalotypes were sometimes hand-tinted with colors to enhance their effect. The effect of opalotype has been compared "to watercolor or even pastel in its softer coloring and tender mood."[1] "Opalotype portraits...for beauty and delicacy of detail, are equal to ivory miniatures."[2] The basic opalotype technique, involving wet collodion and silver gelatin, was patented in 1857 by Glover and Bold of Liverpool. Opalotypes exploited two basic techniques, using either the transfer of a carbon print onto glass, or the exposure of light-sensitive emulsion on the glass surface to the negative. Opalotype photography, never common, was practiced in various forms until it waned and disappeared in the 1930s. "Milk glass positive" is another alternative term for an opalotype. Opalotype is one of a number of early photographic techniques now generally consigned to historical status, including ambrotype, autochrome, cyanotype, daguerrotype, ivorytype, kallitype, orotone, and tintype. This and many other historical photographic methods are now considered alternative photographic techniques and are practised by a small number of dedicated artists.Monochrome portrait photograph of a man in a three piece suit. He has a patterned tie on and wears a medallion on his right lapel. He is clean shaven. Yellowish halo around the figure. Opalotype.Front: Br _______/Melb. (Signature, pencil, lower right)mr sutton, sutton, opalotype, portland town council

Coloured bas-relief photograph of Queen Alexandra. Dark background. She is wearing a formal gown, coloured pink with yellow off the shoulder neckline, white elbow length gloves and carrying a yellow closed fan. The pattern on her gown has been glittered in various colours, along with her snake head bracelet, tiara and choker jewellery. There is an 8mm border along the bottom and a 3mm border along the sides and top. On the bottom border on the left hand side is printed 667 A, in the middle the words H.M. Queen Alexandra and on the right hand side J Beagles & Co E.C. The postcard has been stuck to another piece of card of equal size. On the reverse at the top appears the printed words Portrait Bas-Relief Card The J.B. & Co Series. The card is addressed to Miss I Dean "Esmond" McKenzie Street Golden Square. One penny stamp.J Beagles & Co London E.C.postcard

Bendigo Advertiser from Saturday, November 27, 1943. Two black and white photographs of women in uniform in an outdoor setting. The first is captioned: with Warrant officer Durack (third from left) are from left Cpl Nolte, Cpl Hands, Cpl P. Priest, Cpl H. Morton, Sergeant W. Sprott and Cpl G. Glover. The smiles are for the A.W.A.S. first birthday in Bendigo and for general satisfaction of barracks life. The second is captioned: Group of A.W.A.S. members taken in the garden of their barracks, where one year's residence in Bendigo was celebrated yesterday. From left: Spr. V. Edwards, Private M. Treloar, Private A. Geddes, Spr. A. Lewis, Spr. W. Hyatt. Standing from left: Spr. M. McPherson, Private M. Penton, Spr. G. Johns, Spr. M. Simonds, L/Cpl J. Murray, Pte. G. Simpson, Spr. N. Jeffrey and Spr. S. Pieydell.military, world war 2

Sad-irons or "solid" irons were made by blacksmiths and used to smooth out material by pressing the hot iron over it. A piece of sheet -iron was placed over the kitchen fire and the irons placed on it could be heated whilst remaining clean of ash.. The women used 2 irons - one heating while the other was used. Thick cloth or gloves protected their hands from the hot irons. The handle was removed from the cool iron and re- attached to remove the hot iron from the fire. The cool iron was replaced on the fire or stove to heat again. Mrs Florence Potts invented in 1871 a detachable handle made from walnut wood with a metal latch to release the handle. These wooden handles prevented burned hands and were sold to grateful women all over the world. These irons were cleaned with steel wool to prevent them marking the material. If the iron was too hot the material would scorch. Most homes set aside one day for ironing and some large households had an ironing room with a special stove designed to heat irons. However, most women had to work with a heavy, hot iron close to the fireplace even in summer.Mrs Florence Potts invented this type of detachable walnut wood handle with a meta release latch for sad irons in 1871 and it sold widely throughout the world to grateful women including those in Moorabbin Shire. The family of Ms May Curtis were early settlers in Moorabbin ShireA) A sad iron, made of cast iron , has a special handle invented in 1871 by Mrs Florence Potts of Iowa, USA. B) The detachable handle made of walnut wood to prevent burned hands, was attached to the iron by a metal latch.A) UNITED/ N0 / 50 / AUSTRALIApotts florence, iowa usa, melbourne, moorabbin, sad irons, kitchen equipmentn fireplaces, walnut wood, sewing, laundry, table ware, linen, pioneers, early settlers, washing days, craftwork

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. Book outlines the requirements to be considered - chemicals, conditions re ventilation, protective clothing such as respiratory devices, gloves and eye and face protectors. An understanding of the effects of various chemical solutions. A detailed Glossary of health and safety terms is included. Alternative options for solvents etc is also given. The importance of a safety hazard audit register for hazardous substances is detailed. Glued and cloth bound book of 161 pages. Cover light fawn with black print and binding.viosh, safety and health, victorian institute of occupational safety and health, art facilities, chemicals, ventilation, safety audits, hazardous chemicals and substances, protective clothing, bob hall

The Display Board of Konts was handmade in Kings Lynn, Devon, England, by Tom Long DSM, who is a member of the International Guild of Knot Tyers. This display board shows the knots and joins used in ropework performed by a sailmaker and other skilled ropeworkers. It demonstrates the uses of some of the knots, such as for knobs and handles, suspending lengths of wood, reinforcing spliced rope and even for decorative work. The sailmakers travelling as part of the ship’s crew stored their tool kit in a canvas ditty bag. It contained needles, awls, a sailmaker’s leather palmed glove with a heavily reinforced palm - a shuttle to mend and make nets, fids, knives, mallets, brushes, rulers, and rope gauges. Sailmakers used their ropework and knot-making skills for various purposes and chose the type of rope fibre for its particular properties. For example, Italian hemp rope was preferred for the light line used in shore-to-ship rescues because it was lightweight, not easily knotted, and absorbed less water. A supply of various types of rope was a commodity on board a ship and on land in the new colonies. It was flexible, easily stored, and could be worked to create an endless variety of objects on its own or with other materials like wood. An example is a simple rope ladder. Lengths could be combined to make various thicknesses and pieces could be skilfully joined together by splicing. The importance of knots in seafaring cannot be overestimated. When ships relied on only the wind for power and speed, there were a huge number of various ropes in use, particularly with regard to the sails and rigging. Seafarers would be judged on their ability to tie knots speedily and correctly. A mounted display of authentic seaman's knots is on a board covered in blue fabric. Various rope grades and fibres were used to work numerous knots and splices. Some of the uses are familiar, such as the toggle, the pineapple knot, and the Turk’s head. A selection of rope grades and fibres were used to work numerous knots and splices. Some of the uses are familiar, such as the toggle, the pineapple knot, and the Turk’s head. The name or purpose of the knot is on the label below it. Labels below each knot give its name or use.flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, knot display, knot making, ropework, marine technology, sailmaker's work, sailor's knots, ship's rigging, seamen's knots, handmade, rope craft, knots, splices

Black & white wedding photograph. The wedding party consists of 4 males and 4 females. The men are wearing 3-piece suits. Three of them have flowers in their buttonholes and the 4th one is wearing a clergyman's collar. The bridegroom is sitting on a chair beside the bride who is wearing a long white dress with a long veil. She is holding a large bouquet. The bride and the lady standing on the other side of the groom are wearing a medallion and brooch. The lady to the right of the bride is wearing a plain, long white dress, a white hat, a cross and brooch and she is holding a large bouquet. The lady on the groom's left is wearing an embroidered dress, slightly shorter, a white hat and is holding a large bouquet. The 4th lady is wearing an embroidered dress, gloves, a wide brimmed, dark hat and a cross and brooch. She is sitting on a chair. Photo is mounted on brownish board. Stuck to the back of the board is a notice: Molony & Co., Photo Enlargers and Picture Framers, 44 Honeysuckle Street, Bendigo.W. Vincent Kelly Mitchell St. Bendigophoto, group, wedding, foster & wilson collection, photograph

Sad-irons or "solid" irons were made by blacksmiths and used to smooth out material by pressing the hot iron over it. A piece of sheet -iron was placed over the kitchen fire and the irons placed on it could be heated whilst remaining clean of ash.. The women used 2 irons - one heating while the other was used. Thick cloth or gloves protected their hands from the hot irons. The handle was removed from the cool iron and re- attached to remove the hot iron from the fire. The cool iron was replaced on the fire or stove to heat again. These irons were cleaned with steel wool to prevent them marking the material. If the iron was too hot the material would scorch. Most homes set aside one day for ironing and some large households had an ironing room with a special stove designed to heat irons. However, most women had to work with a heavy, hot iron close to the fireplace even in summer. Late in the 19thC designers experimented with heat retaining fillings for these irons. William Coleman began selling Kerosene lanterns in 1900 in Kingfisher, Oklahoma, USA. He moved to Wichita, Kansas in 1902 and the company became world wide. The company also produced a range of cooking stoves and domestic irons. This spirit- fuelled flat iron was very popular in 1920s - 30s These sad irons remind us of the difficult circumstances experienced in their daily routines by the pioneers and early settlers of Moorabbin Shire The family of Miss M Curtis were early settlers in Moorabbin ShireA) spirit- fuelled, sad iron with chrome plated sole c1920, and metal trivet The iron is blue enamel with a white speckled body, with a hemispherical tank for the Coleman 'Lighting Petrol' that provided the heat for smoothing the material B) Coleman Fuel measuring can and funnellMetal Trivet/stand " COLEMAN" ; Petrol can " COLEMAN" / MEASURING CAN / for INSTANT LIGHTING IRON/ with printed instructionssad iron, kitchen equipment, coleman william, kansas, oklahoma, pioneers, early settlers, market gardeners, sewing, craftwork, clothing, moorabbin, brighton, bentleigh, fireplaces, stoves, petrol fuelled irons, spirit flat irons, coleman lamp stove co. ltd.

The Lady Barbara Grimwade Costume Collection is comprised of Lady Barbara Grimwade's personal apparel and includes 145 pieces of clothing, 10 hats, 19 handbags, 66 pairs of shoes and assorted accessories of gloves, belts and scarves. In its breadth, this significant acquisition ranges from the mundane to the memorable, therefore giving a balanced representation of one person's taste. Following Lady Barbara Grimwade’s death in March 1990, Ararat Gallery formally accepted the generous gift of clothing and accessories donated by Lady Grimwade's son, Mr Angus K Grimwade, on 28 August 1991. Subsequent smaller donations in 1995 enhanced the collection. Lady Grimwade's Scottish forebears, the Gaerloch Campbells, first settled in Australia in 1861 in the Ararat-Beaufort district. Her great great grandfather, Mr Henry Campbell, died on the voyage to Australia. His widow, Jane, with 10 of her 13 children, farmed and grazed land, firstly at Stockyard Hill then at Fiery Creek, near Buangor, before leaving the shire in 1873. Lady Grimwade held a privileged position in Melbourne society. As the wife of Sir Andrew Grimwade, a prominent businessman, Chairman of several boards and a Trustee of various committees, Lady Grimwade met with royalty, heads of state, politicians, corporate directors, and horse and cattle breeders. Excerpt from 'Hot Pink Summers' catalogue essay, Helen Jackson, 1995.