Showing 1213 items
matching fuel
-
Stawell Historical Society Inc
Archive - Book, Motor Spirit Ration Book 1938-1951, 1938
A Recent donation received by the Historical Society was an emergency Petrol sales book that was rescued from the demolition of the old RJ McClure Garage in Main Street. The Garage was located next door to the Town Hall and the book was rescued by a member of council Staff at the time of demolition. The book records; "the Sales of petrol, benzine or other motor spirits or of motor oil or motor accessories to travellers outside the hours prescribed by the factories and shop acts." The First Entry in the book is 14.12.1938, and the final one being 03.03.1951. A Motorist requiring to purchase fuel or motor accessories ha to record their name, address, vehicle registration number, make of vehicle, owner of vehicle, driver of vehicle, number of gallons purchased, the reason for the purcqahse and destination, Some of the reasons stated for the purchase of fuel outside hours were, Funeral arrangements, urgent Sickness, insufficent tank capacity, floodwaters, mechanical breakdown, return of soldier to camp and Urgent Military call. It is interesting to note the registration numbers. early on in the late 1930's, the rego. Numbers were all Numbers like 177301, 43973, 10790, 154900 and 49817. By the early 1040's Letters were being now being used. GC 733, HK 273, BW 450, FJ 668, and LC 612. Some of the vehicle names were recorded were: Willys, Essex, Buik, Morris, Singer, Hudoson, Whippet, Packard, Studbaker, Oldsmobile, La Fayette and Riley.Found at R.J. McClure Garage Main Street Stawell, by John Kindred and Given to SocietyFactories and Shops Act Emergency Bookautomotive, rationing, transport, vehicles, ww2 -
Parks Victoria - Gabo Island Lightstation
Tanks, kerosene vaporiser
The heavy twin tanks formerly contained vaporised kerosene which was used as a fuel to light the lantern. Kerosene became available in the 1860s as the oil industry in the United States developed, and vaporised kerosene soon became the most common system of illumination. The kerosene vapour lamp was perfected by Chance Bros. for burning the light in their renowned lenses. The system involved vaporising kerosene under pressure and mixing it with air and then burning the vapour to heat an incandescent mantle. The lamp had to be watched throughout the night in case a mantle broke, and the tanks needed to be maintained by hand-pumping each hour or so. Kerosene tanks like these were developed in the early twentieth century, and kerosene as a fuel was phased out by electricity, with the last kerosene system in Australia eventually replaced in 1985. The wick lamp in Gabo Island’s light was altered to a vaporised incandescent kerosene mantle burner in 1909. They would have been in use until 1935, when the light was electrified and the original first-order lens was replaced by a fourth-order lens. The Gabo Island tanks, which are presumed to be those used in the lighthouse between 1909 and 1935, are not attached to the optical apparatus and are no longer in the lighthouse. They are also missing the pressure gauges that were formerly attached to the top of each cylinder. Cape Schanck has a pair of unattached tanks, which are not historically associated with the lighthouse. Point Hicks has an iron stand that formerly supported its lighthouse oil tanks. Despite their lack of intactness, the Gabo Island tanks have first level contributory significance for their provenance to the lightstation and historic association with the lantern’s original Chance Brothers first order lens, which was removed in 1935Two large green cylinders standing in a metal frame. There is also a pumping mechanism attached to the stand with a wooden handle. -
Southern Sherbrooke Historical Society Inc.
Photograph - Photo - A truck owned by Bill Hermon is apparently being refuelled
B&W photo of an open tray truck parked in front of a fuel pump on rough open ground with trees in the background. There is a tall pole beside the pump. The truck has 'MILL ENDS Phone EMERALD 61' painted on the side of the tray, and 'W. J. Hermon/EMERALD/61' painted on the door. There is a manually operated turning indicator – a large white hand shape on a pivoting rod – attached to the door. It appears that the signal is operated through the open driver's window. An unidentified man is in the driver's seat and he is smiling at the camera. Dated 1948. -
Moorabbin Air Museum
Document (item) - Various aircraft photos and drawings see description, CAC Misc documents and design drawings of various aircraft
xyz -
Melbourne Tram Museum
Magazine, Brisbane Tramway Museum Society, "Dreadnought - May 1972", May. 1972
Magazine - 20 pages, centre stapled with yellow cover, duplicated sheets titled "Dreadnought - May 1972", Vol. 4 No. 7, published by the Brisbane Tramway Museum Society. Contains items on the Society, Tramcars built by the Brisbane tramway Trust (notes that the bogies of trucks were built by Sewell of Melbourne, early 1920's), Bendigo Tramway Closure, an item on Melbourne and new trams "Trams can be Trendy", impressions of NZ Museums, public transport in Port Moresby and recent developments in Adelaide. Has a Advert for Shell fuels at Grange.trams, tramways, melbourne, mmtb, adelaide, brisbane, bendigo, nz, closure, new tramcars -
Federation University Historical Collection
Artwork, other - Artwork - Decals, ZILLES COLLECTION: Car Dash Decals for Darryl James Rowe; Qualified Instrument Repairs, 1984-1986
Zilles Printers was begun by Lewis Zilles in the early 1930s. It was in McKenzie Street Ballarat. His son Jeffrey also became a printer - letterpress, offset and screen printer. The business became Zilles Printers/Graphics and was in Armstrong Street and later Bell Street Ballarat. Darryl James Rowe was a qualified instrument repairer. He specialized in Vintage car instruments on dash boards. These would include speedometers, car clocks, ammeters, oil gauges, ignition switches, temperature gauges, glass tube fuel gauges and dials repaired. He was located in Vickers Street Sebastopol. Documents relate to the years 1984 to 1986.Decal designs various sizes for car dash boards. Ledger showing orders from 1984Car makers, guages zilles printers, darryl james rowe, instrument repairer, ballarat, vintage cars, dash boards, decals, speedometers, car clocks, ammeters, oil gauges, ignition switches, temperature gauges, fuel gauges -
Vision Australia
Administrative record - Text, 87th annual report 1894-1981 Braille and Talking Book Library, 1981
Annual report of the Braille & Talking Book Library including Minutes of the AGM, Board of Director's Report, President's report and financial statements. Items also included are: the launch of 'In charge of the mess' cookbook with the Gas & Fuel Corporation of Victoria, fundraising cocktail party at 'Onions' restaurant (opposite the Library), Life Governor's Certificate to Edward Webb, production of Braille VFL and Cricket fixtures, subsidy of 33.33% on production of Braille and audio books, doubling of qualified librarians, continued increase in loans, retirement of staff members Elsa Wiltshire and Charlotte Riley, and committee members Norma Brumley and Dr John Foster, and appointment of Barbara Johnson and John Cockayne.1 volume of text and illustrationsbraille and talking book library, annual report -
Trafalgar Holden Museum
Vehicle - VS model commodore, April 1995
The extent of exterior changes veered not much further than a redesigned Holden logo and wheel trims. An updated Ecotec (Emissions and Consumption Optimisation through TEChnology) version of the Buick V6 engine coincided with the changes to the engine in the United States. The Ecotec engine packed 13 percent more power, an increase of 17 kilowatts (23 hp) over the VR, cut fuel consumption by 5 percent, and increased the compression ratio from 9.0:1 to 9.4:1. Holden mated the new engine with a modified version of the GM 4L60-E automatic transmission, bringing improved throttle response and smoother changes between gearsThe VS Commodore was the last of which to be sold as Toyota Lexcens, as Holden and Toyota ended their model-sharing scheme The last Lexcens were built during 1997This model was also sold between 1995 and 1997 in small numbers to Malaysia and Singapore as the Opel Calais.4 door sedan VS Commodore sedanLion and stone badge on Bonnet and on Boot centre, Commore on both mudguards Holden badge on Rear under tail lightsvehicle, vs commodore, car -
Parks Victoria - Point Hicks Lightstation
Weights
A small number of heavy cast iron weights and two rods remain at the Point Hicks Lightstation. These weights comprise one rod with a forked top and four circular weights attached to the bottom of the shaft. The weights and rods were part of the original clockwork mechanism that was fitted beneath the lens to keep the kerosene‐fuelled light turning. They were attached to a cable or chains and moved vertically in similar fashion to the way weights move on grandfather clocks. As the weight fell, the optic clock was driven and the lens was turned. To keep the clock turning, the weight needed to be wound back up to the top of its travel. The cables and weights in this lighthouse were visible as they moved through the length of the tower up to the lantern room. It was usual for systems to move inside a tube extending up to the top, but in this case the tower’s cast iron spiral staircase, which is supported on cantilever cast iron brackets set into the concrete wall, spiralled around the space in which they moved. Lighthouse keepers had the arduous job of having to constantly wind the clock to keep the light active, and at least two keepers needed to observe a strict roster of hours. When electric motors were invented, all of this became redundant and the motors were able to turn the optic for as long as there was power to drive them. In December 1964, the original 1890 Chance Bros kerosene‐fuelled light and clockwork mechanism were replaced by small electric motor, and the number of keepers reduced to two. The six circular weights and rods originate from the obsolete system and may have been part of a larger set. Wilsons Promontory retains seven of its original set of ten weights, all of which are detached from the tower’s weight tube. Cape Schanck has a set of fourteen weights remaining in situ as well as another four detached weights, which have inscriptions. One weight is displayed in the lantern room at Cape Otway. The image shows four of the clockwork weights attached to a rod with a forked top. They were part of the original clockwork mechanism that was fitted beneath the lens to keep the kerosene‐fuelled light turning. The Aldis lamp in its case sits on the floor next to the weights. Source: Parks Victoria.The Point Hicks weights have first level contributory significance for the insights they provide into the superseded technology and operations of a late nineteenth century lighthouse. They are well provenanced and are significant for their historic value as part of the lightstation’s Chance Brothers optical system installed in 1890. Four circular metal weights are stored on a metal rod with a forked section at the top. The weights have a cut out section which allows the weights to be removed easily. -
Ballarat Tramway Museum
Newspaper, "Ballarat to Scrap Trams ...?", c1970
Newspaper clipping from The Sun (?), undated, late 1970? about Parliament (Victorian) being told by the Minister for Fuel and Power (Mr. Balfour) that the City of Ballarat wanted to scrap its trams, following a question from Mr. Trezise (ALP Geelong North) in the Legislative Assembly. No decision had yet been made. Also quotes the Secretary of the Ballarat Trades and Labor Council, Mr. A.C. Williams saying that Ballarat people would protest this decision. On rear of cutting has an item about the Noongah Enquiry, an inquiry into the sinking of the Noongah. Appears to be from a Melbourne Paper, different typeface to that of the Courier.trams, tramways, closure, parliament, ballarat -
Bendigo Historical Society Inc.
Document - MCCOLL, RANKIN AND STANISTREET COLLECTION: SOUTH DEBORAH GOLD MINES JOURNAL
a. Hard cover book green cover, red spine. Written on front 'South Deborah Gold Mines No Liability Journal' Contained handwritten journal entries for years 1941 to 1952 Inserted loose pages (2) with handwritten profit and loss account 1952. Contains entries relating to expenditure in mine including timber, printing, stores, air, mine charges, fuel, lighting, cartage, crushing charges. Salaries to Gl Kingsley, W. Edwards, and wages for workers. b. Two-page typed summary of information contained in journal, prepared by Phyllis Toy (approx. 2015).business, mining, south deborah gold mines -
Melbourne Tram Museum
Manual, MAN, "MAN Buses - Driver's Handbook" and, "Gearbox flaw cripples bus fleet", mid 1980's
.1 - Manual - 116 pages centred stapled - titled "MAN Buses - Driver's Handbook". Has a table of contents, item reference list and electric circuit diagrams. Covers the operation, equipment, driving, cold weather operation, maintenance, lubrication, fuels, general car and maintenance. .2 - newspaper clipping from The Age ""Gearbox flaw cripples bus fleet", dated 26/3/1987, by Tony Harrington, Transport Reporter reporting on the withdrawal of 20 buses from North Fitzroy - replacement parts no longer being manufactured. Also has a loose note about the radiator capacity.trams, tramways, buses, maintenance, man, manual, gears -
Warrnambool and District Historical Society Inc.
Plaque, Warrnambool Co-op Rural Store, 1997
The Warrnambool Co-operative had its beginnings as the Allansford Artificial Breeders Co-operative in the 1960's. In the 1970s they opened a retail store in Timor Street which had a strong rural and farming base which gradually expanded to become the largest trading department store in the district. By the late 1990's they had 8000 members and employed 84 full time and 120 casual staff. It met a sorry end in the 2000's.This plaque commemorates the opening of the Rural store which consolidated the large rural aspect of the business. It opened up the site from Merri Street at the back of the Timor Street building trading in all agricultural products, , chemicals and fuels.A link to one of Warrnambool's largest stores of the latter part of the 20th century and as such it has historical and social significance. Rectangular brass plaque with stamped black text with eight screws around the edge attaching it to a piece of heavy particle board , painted black.Warrnambool Co-Op rural Store officially opened by the Mayor of Warrnambool Cr. Gerald Shanley on Wednesday, 8th October 1997.warrnambool co-operative society limited, warrnambool co-operative rural store, warrnambool -
Melbourne Legacy
Photograph, Legacy Appeal 1986, 1986
A photo of two young ladies with metal Legacy Appeal tins and a badge tray. The slogan says "We ask so little for those who gave so much. Legacy cares for families of deceased ex-servicemen". Promoting badge day in September 1986. See also 00435. The yellow label with 00435 says that the young ladies are: "Su Davies and Carol Shaw / Staff members sold badges in the city on Badge Day, 1986". They may have been professionally taken to publicise Legacy Week in the newspapers. Carol Shaw was a staff member who participated in several events to publicise Legacy. Such as abseiling down the Gas and Fuel Buildings.A record of fundraising in 1986.Black and white photo of two young ladies collecting for the Legacy Appeal.fundraising, legacy appeal, badge week -
Department of Energy, Environment and Climate Action
Bedford M Series fire tanker
Ash Wednesday Veteran This Bedford M Series tanker spent its working days at the Forests Commission depot at Gembrook, and among its many forays, fought the deadly Ash Wednesday bushfires at nearby Upper Beaconsfield and Cockatoo on 16 February 1983. Earlier in 1975, the M Series tankers underwent a design change at the Altona North workshops, replacing the cylindrical water tank with a “V” bottom 4090 litre water tank that sat low between the chassis rails to reduce its centre of gravity. Aluminium heat shields were also added to protect the pump operators on the back. While generally considered "bulletproof" the petrol fuel lines on this particular model were very prone to vaporise in the heat causing the motor to stall, often at the most dangerous moment.... in this case frightening the hell out of its driver, affable knockabout bloke, and firefighting legend Lex Wade. Some jokingly said this design quirk was an inbuilt safety feature to stop crews getting too close to the fire in the first place. The Gembrook tanker was later sent into the workshop and all its brake and fuel lines fitted with heat resistant lagging. Fortunately, this remarkable bushfire survivor was rescued from the scrap heap by Lex and fire equipment wizard Barry Marsden upon its retirement from a loyal and lengthy service. After a lick of fresh paint and most of its battle scars "buffed out", this time-honoured veteran now takes pride of place at the Altona North workshop.Bedford M series fire tankerMZF 347fire pump, fire tanker, forests commission victoria (fcv) -
Flagstaff Hill Maritime Museum and Village
Functional object - Kerosene Lamp Burner, Bradley and Hubbard Manufacturing Company, Late 19th to early 20th century
Bradley and Hubbard established their company in 1852 in Meriden, Connecticut when Nathaniel and William Bradley, Orson and Chitten Hatch, and Walter Hubbard, formed Bradley, Hatch & Company. This incarnation of the company only manufactured clocks. The Hatch brothers sold their interest in the company in 1854 and it was renamed, Bradley & Hubbard. Clocks remained the firm's primary product into the 1860s. In addition to their line of clocks, Bradley & Hubbard also produced a wide range of household items including match safes, call bells, andirons, urns, bookends, frames, desk accessories and vases. Technological advances in drilling and refining crude oil in the late 1850s and early 1860s paved the way for the demise of whale oil as lamp fuel. Soon after Colonel Edwin Drake struck oil in Titusville, Pennsylvania on August 27, 1859, Nathaniel Bradley saw an opportunity to capitalize on the future of this new fuel. Nathaniel decided to produce an extensive line of kerosene burning lamps this proved to be a wise business decision. Kerosene was soon to become a widely used, safe and relatively inexpensive lamp fuel. Between April 7, 1868, and December 23, 1913, the company was listed as the assignee for at least 89 lighting patents. Many of these patents were for lamp and chandelier designs and various improvements in lamp burners. In 1875 the company reorganized to form the Bradley and Hubbard Manufacturing Company. Walter Hubbard served as President and Nathaniel Bradley as Treasurer. The firm enjoyed rapid growth throughout the 1880s. By 1888, the company employed over one thousand workers and had showrooms in major cities including New York, Philadelphia, Boston and Chicago. One of the most prolific of the B&H products was the Rayo lamp it produced under contract for Standard Oil. In keeping with the changing times, Bradley & Hubbard produced a variety of electric lamps as well. Walter Hubbard passed away in 1911 and Nathaniel Bradley in 1915. The company continued through the 1930s and was purchased by the Charles Parker Company, also of Meriden, Connecticut, in 1940. The Parker Company was quite diversified in its product line, also producing an extensive line of lamps and high-end chandeliers. Parker operated its acquisition as the "Bradley & Hubbard Division." Parker ceased production of the Rayo lamp in the early 1950s. In 1973, the Bradley and Hubbard buildings were demolished, effectively ending that chapter in American lighting manufacture.Early innovation in kerosene lamp burner design by Bradley and Hubbard lamp manufacturers who at the turn of the 20th century were the biggest lamp producers in the world. The item is significant due to its historic connection with a major innovator of lamp design.Lamp Burner, metal container with turning screw for wick and mesh walls. Is made in 2 parts. Raised embossing on wick adjustment screw " PAT APPLIED FOR" on top of burner "B & H Patented.July.1.90.Nov.20.94"flagstaff hill, warrnambool, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bradley & hubbard manufacturing company, kerosene lamp burner, early lighting -
Ballarat Tramway Museum
Document - Abandonment SEC tramways, the Hon J C M Balfour MLA, 9/1970
Document regarding the abandonment of tramways in Ballarat and Bendigo. Presented to State Parliament Sept. 1970 by the MInister for Fuel and Power, the Hon J C M Balfour MLA. Outlines the losses incurred by the SEC, replacement public transport system, the worn out nature of the system, the gifting of one Bendigo tramcar to the AETM, costs of track repairs and new trramcars, tenders for replacement bus services, retrenchment payments to staff, reconstruction of existing roads following removal of the tracks, and town planning and traffic aspects. Includes a photo of a bus and interior seating. A graph from 1934 to 1970 shows the service miles, passengers carried, average fare, expenditure, revenue and loss, along with dates of major fare revisions.Yields information about the 1970 proposal to close Ballarat and Bendigo tramway systems which was successful despite previous attempts when the Bolte Governments did not have the numbers in the upper house.Document 16 Quarto sheets, duplicated and one sheet with a folded colour graph.In ink on front sheet "D/T/S"tramways, ballarat, bendigo, abandonment, closure, parliament -
Bendigo Historical Society Inc.
Book - BOUND ACCOUNTS BOOK: GAS AND FUEL ?, 11/08/1958
Bound Accounts Book. First pages are headed ''Accounts for Payment as per Vouchers. Various Bendigo Businesses listed on each page. Pages list dates of entry from August 11, 1958 to January 5th 1970 with details of amount beside name or business. These are Bendigo businesses generally so this indicates a local operation - on the back page (page 141) is a stamp ''Gas & Fuel Corp. Of Vic. - Internal Audit'' with signature indicating start of a new book. Printed page pinned to page 15 of this accounts book gives no further information as to name of business - so potentially G&F?? First page only scanned.business, retail, gas and fuel -
National Vietnam Veterans Museum (NVVM)
Photograph, C.1968
CITATION TO ACCOMPANY THE AWARD OF THE DISTINGUISHED FLYING CROSS (First Oak Leaf Cluster) Squadron leader Alan R Reed distinguished himself by extraordinary achievement while participating in aerial flight as and RD-4C Aircraft Commander in Southeast Asia on 24 August 1968. On that date, he flew his aircraft repeatedly through intense hostile ground fire to obtain complete photographic coverage of the target. In addition, he voluntarily remained in that hostile environment for as long as fuel would allow, to act as a spotter and to pass firing corrections to friendly artillery. The professional competence, aerial skill, and devotion to duty displayed by Squadron Leader Reed reflect great credit upon himself and the United States Air Force.Black and White photo in black and white frame of SQN LDR Alan Reed receiving a citation to accompany Distinguished Flying Cross 21 /08 /1968. with supporting info.flying cross, alan reed -
4th/19th Prince of Wales's Light Horse Regiment Unit History Room
Photograph - Framed Photograph, WW1 1st Australian Light Car Patrol
See InscriptionFramed B&W photo of 7 patrol cars with crews at Aleppo Railway Station, Syria. Two motor cycles are in shotAWM logo. Caption: WW1 1st Australian Light Car Patrol. Operated in the Middle East and Palestine. The seven cars (Model "T" Fords) comprised four fighting vehicles equipped with Lewis machine guns. Each had a tender vehicle to carry spares, water, fuel, ammunition etc. It was here at Aleppo Railway Station where the final battle took place to end the war. The unit was commanded by Cap't Ernest H James MC & Barww1 1st australian light car patrol, 7 ford model t vehicles fitted with lewis machine guns -
Ballarat Tramway Museum
Document - Letter/s, State Electricity Commission of Victoria (SECV), "SECV - Statement regarding proposal to Abandon tramways in City of Ballarat and Borough of Sebastopol and City of Bendigo and Borough of Eaglehawk", 10/09/1970 12:00:00 AM
Demonstrates the methodology of the abandonment of the SEC systems in Ballarat and Bendigo by the SEC and the process that had to be undertaken..1 - Letter - 2 page quarto duplicated - dated 10/9/1970 addressed to the Minister for Fuelled and Power J. Balfour, signed by the SEC Secretary F. Chipperfield, submitting a notice of abandonment in accordance with the SECV Act, with reference to the TRB Enquiry of 1968, the need to lay the motion on the houses of Parliament for 24 days. .2 - Statement - 25 pages duplicated titled "SECV - Statement regarding proposal to Abandon tramways in City of Ballarat and Borough of Sebastopol and City of Bendigo and Borough of Eaglehawk", giving details of the tramways to be abandoned, history, reasons, financial, SEC Obligations following abandonment, future of Tramway's Employees, road reconstruction and future (disposal) of tramway assets."D1775" in ink on top sheet right hand corner.trams, tramways, sec, closure, ballarat, bendigo, parliament, notices and information, borough of sebastopol, borough of eaglehawk, city of ballaarat, city of bendigo -
Orbost & District Historical Society
account, March 31st 1911
Lancelot Herbert came to Orbost in 1886, taking up a partnership with local store-owner George Temple. After Mr Temple’s death in 1891, Lancelot took over the store and progressively developed Herberts Snowy River Stores which grew into a department store of several shops along Nicholson St. He also had small shops at Cann River, Noorinbee and Genoa which were run by members of his family, as well as a carrying business and fuel outlets. Lancelot died on 2/6/1911 and his wife Martha [died 1945] are buried in a joint grave in Orbost Cemetery. (info. Noreen and Lindsay Thomson) Robert Pullar Cameron was a Shire Councillor for many years. He married Penuel Hossack and had a family of James, Flora, Penuel and Alex.This item is associated with a well-known Orbost business which started in 1888 and finally closed in c.1970. it is an example of book-keeping in the early 20th century and is a useful research tool.A white paper account with black print and red lines. Hand-written from Lancelot Herbert of Snowy River Stores to R.P. Cameron.herbert-lancelot snowy-river-stores cameron-robert-pullar -
Orbost & District Historical Society
book / souvenir, Lancelot Herbert, Snowy River Stores and Bakery and at Cann River, c. 1910-20
This is a small souvenir or promotional book for Herbert Stores in Orbost and Cann River. Lancelot Herbert came to Orbost in 1886, taking up a partnership with local store-owner George Temple. After Mr Temple’s death in 1891, Lancelot took over the store and progressively developed Herberts Snowy River Stores which grew into a department store of several shops along Nicholson St. He also had small shops at Cann River, Noorinbee and Genoa which were run by members of his family, as well as a carrying business and fuel outlets. Lancelot died on 2/6/1911 and his wife Martha [died 1945] are buried in a joint grave in Orbost Cemetery. (info. Noreen and Lindsay Thomson. More from "In Times Gone By' by Deborah Hall)Associated with a well-known Orbost business which started in 1888 and finally closed in c.1970. A small book with a white/cream cover and black printing. It has three cardboard pages inside which are blank. A pencil holder is attached to the back cover. On front cover: SNOWY RIVER STORES AND BAKERY. Established 1886, AND CANN RIVER. Lancelot Herbert, Wholesale and Retail DRAPER, OUTFITTER, Grocer & Ironmonger, MILLINERY A SPECIALTY. BAKERY, SMALLGOODS FRESH DAILY. Tobacco & Cigars of the Best Brands. AGENT FOR: Age, Leader, Every Saturday, Argus, Australasian, Melbourne Punch, and Sydney Morning Bulletin. WINES AND SPIRITS.souvenir herbert-stores -
B-24 Liberator Memorial Restoration Australia Inc
Pratt & Whitney R 1830 Radial Engine, 722
This engine was used by RAAF 21 Squadron personnel to manufacture and fit up exhaust systems and had been left standing for a long time without any preservation treatment. Much effort was put in to free up the motor and after it had been made to turn, checks by borescope showed some fretting had occurred in the cylinder bores. This was deemed not serious enough to warrant a strip down. It did need repairs to the ignition looms and various other adjustments but first started on the 16 July 2009. Various fuel problems were evident and repairs have been done and it now runs very well. All parts used in getting this motor to run successfully came from the fund's own stock or parts included in other purchases. The Pratt & Whitney R 1830 is a double row 14 cylinder air cooled radial engine with a capacity of 1830 cubic inches, (30 litres), developing some 1200 horsepower at a maximum 2700 rpm.Engine Number 722 -
Ballarat Tramway Museum
Booklet - Souvenir Programme, Alex King & Sons Pty Ltd, "Greyhound Racing - Broadway Park", July 1944
Booklet - for the Greyhound Racing event to raise funds for Sylvia Mitchell, held at Broadway Park on 15/7/1944. Has a photo of Sylvia on the front cover. Gives the programme for the 9 race event. Has a number of advertisements throughout, including Rowlands Table Waters on the back cover. Has pencil marks, including names of dogs for the final event. Advertisers are: G H Hauser Fruit and Vegetables, A F Witham auctioneer, Bucks Head Hotel, Gear's Pharmacies, George Hotel, Haymes Paints, Gold Top Taxis, Keith's Fruit store, Harry Davies, F M Thieseen business agents, The Regent Theatre, A H Joiner furniture, F C Heath fuel merchant, City Hall Pharmacy, Quayle cycles, Clarke's Cough mixture, and Bill Valpied Fruiter.Demonstrates work to support the Red Cross Prisoner of War fund raising.Sixteen page booklet, printed centre stapled with a red ribbon on the cover.most popular conductress, sylvia mitchell, tramways, red cross, events, broadway park, greyhound racing, advertisements -
Flagstaff Hill Maritime Museum and Village
Domestic object - Stove, Cox and Rizzetti Stove Works, ca. 1918-1930s
Cast iron stoves burn solid fuel such as wood or coal, and are used for cooking and warmth. The stoves have a firebox with a grate where the fuel is burned. The hot air flows through flues and baffles that heat the stove top and the oven. Before cast iron stoves were invented, cooking and heating were carried out in outdoor open fires, and later, in fireplaces inside the home. In 1642 the first cast iron stove was manufactured in Lynn, Massachusetts, where molten cast iron was poured into a sand mould to make rectangular plates that were then joined together to make a box. Benjamin Franklin invented the more efficient Pennsylvania stove in 1744, and this efficient design is still used today. After the mid-19th century cast iron stoves were produced with burners in different positions, giving varied temperatures, so a wide variety of foods could be cooked at the same time at the most suitable heat, from slow cooking to baking scones. In contemporary times people the new wood-burning stoves had to meet the anti-pollution standards now in place to protect our environment. By the 1920s gas cookers were being introduced for domestic use, and by the 1930s electric home cookers were being offered to householders. PLANET STOVES In August 1925 the firm Cox and Rizzetti, Stove Works, and also Sydney Road, South Melbourne, advertised in the Brunswick and Coburg Leader of November 11, 1925 as "formerly with Harnwell and Sons" and as "specialists in solid cast iron Planet stoves ... which merit an inspection from builders and householders". The firm continued in business and was mentioned as sponsors in the King Island News in 1971. Harnwell and Sons was listed in the Victorian Government Gazette of 1894. It is curious that the firm was mentioned in an article in the Sunrasia Daily of June 14, 1934 titled 'Planet Stoves' as a manufacturer of Planet Stoves. This Planet No 3 stove is an uncommon example of cooking equipment used in kitchens in the early 20th century, as the firebox is above the oven rather than beside it. The cast iron combustion stove is significant as part of the evolution of domestic cooking. Previously cooking was mostly carried out in outdoors in open fires, and later in fireplaces indoors. Cast iron stoves are still used today and have additional features such as thermostats to monitor and maintain temperature, water heating pipes connected, and environmentally approved anti-pollution fittings. Stove; a compact, blackened cast iron combustion cooker, installed within a fireplace and enclosed by bricks on both sides. The upright rectangular stove has a flat top with three round, removable cook plates and a flue connected at the back. The front has three doors with round knob handles; a swing-down firebox door above a sliding ashtray, and two side-hinged oven doors above a sliding opening. Inside on the side walls are two pairs of runners. Behind the pair of doors is an oven with two pairs of rails and two removable metal shelves. The stove has cast inscriptions on the chimney flue and on the front of the right hand side stove door. The model of the stove is The Planet No 3, made in Melbourne.Chimney flue, "[within rectangle] THE / PLANET" Stove door, "(within oval) PLANET / No 3"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, stove, cast iron stove, combustion stove, wood-burning stove, wood stove, wood oven, solid fuel stove, cooker, the planet, planet, planet no. 3, kitchen equipment, baking, domestic cooking, cooking equipment, food preparation, planet stove, planet cooker, cooking range, slow combustion stove, antique, range cooker, cox and rizzetti, harnwell and sons, melbourne manufacturer -
Trafalgar Holden Museum
Vehicle - VN Commodore, 1988
The VN Commodore was available in Executive, S, SS, Berlina and Calais specification levels, although a more basic SL model (opt. code A9K) was supposedly offered to government and fleet buyers, as it was not officially listed as part of the Commodore range. Changes in the relative values of the Australian dollar, the Japanese yen, and the US dollar made it impractical to continue with the well-regarded Nissan engine of the VL. Instead, Holden manufactured their own 90-degree V6 based on an old Buick design from the US, although initially it was imported. The 5.0-litre V8 remained optional and received a power boost to 165 kW (221 hp). Both these engines used multi point GM EFI and the V6 using 3 coil-packs for ignition. Holden and HSV developed this car as the basis for racing in Group A Confederation of Australian Motor Sport events. While the minimum number of cars built to qualify in Australian Touring car Championships, with modified body kit, brakes or engine is 500, only 302 VN were built but CAMS granted an exemption allowing them to compete.Holden and HSV had worked hard to develop this car to be a serious competitor to the Skyline, Ford Sierra and the BMW which had dominated in the previous years. This was to be the Holden’s answer and coincided with the return of Peter Brock back to the Holden team from 1987.Mechanically the cars were fitted with reworked version of Holden’s 4.9 litre V8. The engine block was cast for additional strength, modified cylinder heads roller rockers and high fuel flow fuel injection was applied. Output was 215 kw at 5200revs and, though at today’s standard, that is not that much it was very impressive at that time. The drive was through a six speed ZF gearbox with a heavy duty racing clutch and a limited slip differential.Under the Hawke government's Button car plan, which saw a reduction in the number of models manufactured locally, and the introduction of model sharing, the VN Commodore was rebadged as the Toyota Lexcen, named after the late America's Cup yacht designer, Ben Lexcen. Subsequently, the Toyota Corolla and Camry were, similarly, badged as the Holden Nova and Holden Apollo.Red executive 4 door sedanHolden Lion and stone emblem grille centre, Commodore boot LHS, Lion and stone emblem boot RHS.vehicle, vn commodore, holden, car -
Parks Victoria - Point Hicks Lightstation
Weights
A small number of heavy cast iron weights and two rods remain at the Point Hicks. The weights and rods were part of the original clockwork mechanism that was fitted beneath the lens to keep the kerosene-fuelled light turning. They were attached to a cable or chains and moved vertically in similar fashion to the way weights move on grandfather clocks. As the weight fell, the optic clock was driven and the lens was turned. To keep the clock turning, the weight needed to be wound back up to the top of its travel. The cables and weights in this lighthouse were visible as they moved through the length of the tower up to the lantern room. It was usual for systems to move inside a tube extending up to the top, but in this case the tower’s cast iron spiral staircase, which is supported on cantilever cast iron brackets set into the concrete wall, spiralled around the space in which they moved. Lighthouse keepers had the arduous job of having to constantly wind the clock to keep the light active, and at least two keepers needed to observe a strict roster of hours. When electric motors were invented, all of this became redundant and the motors were able to turn the optic for as long as there was power to drive them. In December 1964, the original 1890 Chance Bros kerosene-fuelled light and clockwork mechanism were replaced by small electric motor, and the number of keepers reduced to two. The six circular weights and rods originate from the obsolete system and may have been part of a larger set. Wilsons Promontory retains seven of its original set of ten weights, all of which are detached from the tower’s weight tube. Cape Schanck has a set of fourteen weights remaining in situ as well as another four detached weights, which have inscriptions . One weight is displayed in the lantern room at Cape Otway. The Point Hicks weights have first level contributory significance for the insights they provide into the superseded technology and operations of a late nineteenth century lighthouse. They are well provenanced and are significant for their historic value as part of the lightstation’s Chance Brothers optical system installed in 1890.PHLS0005.1 Round cast iron weight with flat base used for lens clock-work mechanism attached to a bent metal rod. PHLS0005.2 Removable round cast iron weight with flat base used for lens clock-work mechanism stored above the other weight. -
Orbost & District Historical Society
black and white photograph, late 19th - early 20th century?
This photograph shows men fishing in the Snowy River at Marlo - possibly at Bream Point. The man in the white coat is Lancelot Herbert. Lancelot Herbert came to Orbost in 1886, taking up a partnership with local store-owner George Temple. After Mr Temple’s death in 1891, Lancelot took over the store and progressively developed Herberts Snowy River Stores which grew into a department store of several shops along Nicholson St. He also had small shops at Cann River, Noorinbee and Genoa which were run by members of his family, as well as a carrying business and fuel outlets. Lancelot died on 2/6/1911 and his wife Martha [died 1945] are buried in a joint grave in Orbost Cemetery. (info. Noreen and Lindsay Thomson. More from "In Times Gone By' by Deborah Hall)This item is associated with the Herbert family very early settlers in the Orbost district. It is also associated with Marlo which has always been a popular fishing destinationA small black / white photograph of four men fishing from a river bank. Three are sitting and one is standing.on back - Lancelot Herbert in white coat fishingfishing-marlo herbert-lancelot -
Orbost & District Historical Society
book, The Gearchange, C 2015
The American Truck History Association is an international organization, with over 21,000 members in the United States, Australia, Canada, and 20 other countries worldwide. A.H. McMullen & Co P/L, established by Arthur McMillan in February, 1951, had a long history as transport operators in Orbost and Gippsland districts. The company became Gippsland's largest transport company. It carted timber from the Orbost/ Cann River district district sawmills to the railway station. Two trains a day left the sloaded with timber. Beans were carted from Fisher's Bean Factory to Melbourne and Sydney. Cream from the farms was transported to the butter factory and for almost twenty years Fuel was carted from Melbourne to the RAAF base at Sale by McMullens. In 1970 the company was sold to F.J. Stephens and then to Mayne Nickless Transport. (ref.Deborah Hall "In Times Gone By') A.H. McMullen was a significant business in the mid 20th century in Orbost. This book is a useful reference source.A 40pp book with a dark blue cover titled "The Gearchange". It is a "Classic Edition Issue No. 2" and features A.H. McMullan & C0 P/L. It has a cost of $20.00. It contains illustrations, photographs and text.transport mcmullen-transport-orbost trucking