Document titled "Tramway Maintenance Minutes of Conference - April 26 and 27 1951", attended by SEC Head Office Officers, representatives from Bendigo and Geelong. Opening note on page 2 - that the discussions should be based on the SEC operating the tramways indefinitely. Topics covered - tyres and wheel centres, truck maintenance, suspension bearings, bearing metal (white metal), motor armatures, carbon brushes, air receivers, overhead equipment, tracks, car renovation - painting, gold lining, roof, floor treatment and covering, trolley wheels, purchase requisitions, spare parts, supplies, brake shoes, timber, castings, tramway drawings, patterns and a summary of action. Has a list of attendees.Yields information and demonstrates SEC Meeting minutes about discussions between the three Provincial operators about tramcars and operations.Minutes - 26 duplicated foolscap sheets pinned (was stapled poorly) in the left hand corner.trams, tramways, minutes, sec, geelong, ballarat, bendigo, tramcar equipment, maintenance, trackwork, overhead, painting, trolley wheels, brakes, motors

Climax geared locomotive No. 1694 in active service on special occasions - stored at Emerald Station A Miraculous Survivor Climax locomotive No.1694 is a miraculous survivor of a rare breed of steam locomotive. For about 100 years from the mid-1850s sawn timber was carted from Victorian sawmills to the nearest railway station by timber tramway. These tramways were generally very rough, steeply graded, sharply curved, and of narrow gauge. Many had wooden rails, and horses provided haulage. The better ones used steam locomotives. In all about fifty steam locomotives are known to have worked on Victorian timber tramways. These locomotives were usually somewhat peculiar - made to cope with arduous, rough conditions, rather than speed. Climax locomotive No.1694 is the only one of these locomotives to survive intact. It was built in 1928 by the Climax Manufacturing Company, Corry, Pennsylvania, USA, for the Forests Commission of Victoria. The distinctive feature of the Climax locomotive is that the cylinders do not directly connect to the driving wheels. Instead they drive a cross shaft near the centre of the locomotive. From there the drive is transmitted to the small driving wheels through rotating shafts, universal joints, and bevel gears. The driving wheels are mounted in two four-wheel bogies so that they can easily follow sharp curves in the track. None of these features are found in normal steam locomotives. The result is a locomotive that is extremely powerful for its size, and that will cope with sharp curves and steep grades with ease. But this is at the cost of speed, Climax locomotive No.1694 is just about flat-out at 13 km/h (8 mph). Climax Locomotive Built in 1928 for the Forests Commission of Victoria and painted all-over black with the name CLIMAX painted on the sides of the cab in white block letters, this locomotive was issued to the Tyers Valley tramway which branched off the Moe to Walhalla line at Collins Siding. This locomotive was withdrawn from service in 1949 following the closure of the tramway and in 1950 it travelled from Tyers Junction to Collins Siding to Erica where it remained stored until 1965. Loaned to the Puffing Billy Preservation Society for its Steam Museum, it was taken to Menzies Creek in 1965 where it remained until 1982 when the Emerald Tourist Railway Board bought it and transferred it to Belgrave for restoration. It was returned to service for special use on the Belgrave to Gembrook line in 1988 painted in its original all-over black livery, except that the word “Climax” on the sides of the cab was now painted in the style of the Climax Manufacturing Co., a style that this locomotive had never carried.Historical - Industrial railway - Forests Commission of Victoria, Timber Logging Climax Locomotive Climax geared Steam locomotive made of steel and wrought iron Climax 1694climax locomotive works, climax, geared steam locomotive, puffing billy, climax locomotive no. 1694, steam locomotive

James Reid was born in Scotland near Glasgow and came to Victoria as a young man in 1854. Shortly after arriving he came to Bacchus Marsh where he lived until his death in 1902 at the age of 74 years. For most of these years he conducted a wheelwrights and coach builders business in Bacchus Marsh. In the nineteenth and early twentieth centuries, wheelwrights and blacksmiths played an essential role in the functioning of the whole community. Before the industrialisation of manufacturing, wheels and other components of vehicles for transport, all metal objects, including farm implements, building requirements and domestic utensils were made by hand. As mechanisation of industry increased, the smith commonly performed the role of farrier in the times when horse power was pivotal to all aspects of society. Small sepia unframed photograph on card with gold border framing photograph. Housed in the album, 'Photographs of Bacchus Marsh and District in 1883 by Stevenson and McNicoll' The photo shows a plain brick house with a central front door with a window on either side. There are a further two windows along the side of the house. On the left-hand side of the building there is a smaller room with its own entry door. The main roof is tiled with shingles or slate and features two substantial chimneys. At the front of the house stands a young woman with her hands clasped. A horse can be seen at the rear of the house. From the photo of the James Reid Wheelwright and Blacksmith Shop, Victorian Collections No.VC 618, we know that this house stood to the rear of the workshop. The wheel tracks which can be seen lead out to Main Street. On the front: Stevenson & McNicoll. Photo. 108 Elizabeth St. Melbourne. COPIES CAN BE OBTAINED AT ANY TIME. On the back: LIGHT & TRUTH inscribed on a banner surmounted by a representation of the rising sun. Copies of this Portrait can be had at any time by sending the Name and Post Office Money Order or Stamps for the amount of order to STEVENSON & McNICOLL LATE BENSON & STEVENSON, Photographers. 108 Elizabeth Street, MELBOURNE houses bacchus marsh, stevenson and mcnicoll 1883 photographs of bacchus marsh and district, james reid 1828?-1902, wheelrights bacchus marsh

Sewing Machine, Medium C S. (item has 10 parts), treadle operated, in wooden cabinet. Machine body is black with floral decals in gold, cream and red. Cabinet has wheels, 4 drawers containing cylinder shuttle, 2x bobbins, handle from a drawer and a bundle of horse hair. Drive belt is missing, cabinet has evidence of borer. Ironwork on right upright has 2 splits, name on plate of treadle is worn off. Decals include English Made and Approved to Her Majesty Queen Victoria. Machine has Serial Number.Pencilled inside machine support " 11/11/10 H M X" Serial Number "66389" Decals include "MEDIUM C.S / APPOINTED TO HER MAJESTY / QUEEN VICTORIA", "ENGLISH MADE".flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, sewing machine, cylinder shuttle sewing machine, dressmaker's equipment, taylor, jones sewing machine, medium c.s. machine, medium cylinder shuttle machine

The photograph was taken on Easter Monday 1916 at the Easter Carnival. It is showing one of the exhibits at the Australian Natives Association's Fruit and Vegetable Exhibit, at the Mentone Recreation Ground. The Easter Carnival was a fund-raising event to assist and repatriate wounded WW1 soldiers returning home. The photographer is unknown.Black and white photograph. The photograph is showing two men, a horse and a carriage. One of the men is holding on to the horses' harness and the other man in standing on a platform on the carriage holding the horses' reign. The horse is harnessed to the carriage containing various fruits and vegetables elaborately displayed. Much of the fruit and vegetables are seen in boxes along the carriage and others are hanging along the edge of the carriage. Some of the fruit and vegetable clearly able to be seen are pumpkin, parsnip, carrots, cabbage, cauliflower, turnip, grapes, various types of apples, oranges and lemons. There are also flowers meticulously arranged around the frame of the carriage and wheels. Front; A.N.A Exhibit / Easter Carnival - 1916 Back; Donated by / W.A.Follett / Heatherton ( written in ink ) Easter Monday CCarnival / at Mentone Recreation Ground / 1916 A.N.A ( written in pencil)easter carnival, 1916, photograph, australian natives association, fund-raising, world war i, ww1, mr w.a follett - heatherton, fruit, vegetable, mentone, mentone recreation ground

This doll's pram was owned by the daughter of Dr William Roy Angus and his wife Gladys when the family came to Warrnambool in the late 1930s. It is part of the W.R. Angus collection, donated by the family of Dr W R Angus, surgeon and oculist. The W R Angus Collection spans the years 1885 to the mid-1900s and includes historical medical and surgical equipment and instruments from the doctors Edward and Thomas Ryan of Nhill, Victoria. Dr Angus married Gladys in 1927 at Ballarat, the nearest big city to Nhill where he began as a Medical Assistant. He was also Acting House surgeon at the Nhill hospital where their two daughters were born. Dr Angus and his family moved to Warrnambool in 1939, where Dr Angus operated his own medical practice. He later added the responsibility of part-time Port Medical Officer and was the last person appointed to that position. Both Dr Angus and his wife were very involved in the local community, including the planning stages of the new Flagstaff Hill and the layout of the gardens there. Dr Angus passed away in March 1970.This doll's pram is connected to the history of Warrnambool, as it was owned by the daughter of Dr W. R. Angus and his wife Gladys, and is part of the W.R. Angus Collection, which is important for still being located at the site connected to Doctor Angus, Warrnambool’s last Port Medical Officer. Dr Angus and his wife brought their young family to Warrnambool in 1939 and he remained a resident until his death in 1970. Early in his profession in the town of Nhill, Dr Angus assisted Dr Tom Ryan in his pioneering use of X-rays and in ocular surgery, and Dr Angus later inherited these items. The W.R. Angus Collection includes these medical instruments and other related equipment and is culturally and historically significant as an example of the medical practice of the late 19th to the mid-20th century. Other items in the collection relate to Dr Angus’ service in the Flying Doctor Service and the Army.Pram has a folding blue vinyl hood and a rectangular, white wicker base with curved corners at the bottom. The base and hood are lined with white vinyl. The wheels have eight spokes and black rubber tyres. The curved handle has a metal bard the width of the pram, which is covered in a white rubber tube. The handle sides are joined to two curved flat bars that extend in an outwards curve away from the pram. The Hood is hinged to flip from the back to the front of the pram and is designed to can fold. The undercarriage has suspension springs. The pram is part of the W.R. Angus Collection.flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, dr w r angus, dr roy angus, dr ryan, warrnambool oculist, port medical officer, nhill base hospital, mira hospital nhill, doll's pram', toy pram, child's pram, toy, w.r. angus collection

Newspaper article titled History just keeps motoring on. Bendigo Advertiser 21/7/97. Photo shows Greg Smith, his son Brenton and friend Doug Clarkson making their way in an International Motor Buggy to a Bendigo Veteran and Vintage Car Club meeting which was held at the Bendigo Chinese Gardens Museum. The motor buggy has large buggy type wheels and has no cabin. The number plate is 246. Written below the photo is: There was the same Motor Buggy in St Just Point owned by Tyson Family. Written on the back is: Red Plate 246.bendigo, history, long gully history group, the long gully history group - greg and brenton smith, doug clarkson, bendigo advertiser 21/7/97, peter hyett, bendigo veteran and vintage car club, bendigo chinese gardens and museum

As built - Single truck, straight sill closed cross bench tramcar. As recovered - frame, roof, sides (some damage), and some internal parts. Placed on a fabricated truck - made from wheels ex Preston transfer dolly and steel crane beams ex Johns Valves. Moved from Tait St Sebastopol to Depot Friday 22 May 2009 - see other files etc. For photographs of preparing the tram for the move see Reg Item 4311 and the move itself 4312 and April and June 2009 Fares Please, supplementary files for associated emails etc.trams, tram 22, esco, ballarat

The MDNS Trained nurses (Sisters) are about to board two motor vehicles outside their Nurses home, at 39 Victoria Parade, Collingwood, to be driven to give nursing care to their patients who lived a distance away. The lady Chauffeur is probably Miss Sword who was employed by MDNS in 1922-23; she was also in charge of the garage. This enabled the Sisters to do more visits in a day than when using Public transport all the time. This image also shows the style of cars driven in that era. The Sisters uniforms are grey and their hats have a red Maltese cross attached to the centre front of the hatband. Royal District Nursing Service (RDNS) has had various modes of transport over the last 130 plus years. At first, from 1885 as Melbourne District Nursing Society (MDNS), their Trained nurses (Nurses) walked the streets and lane ways amid the slums of central Melbourne. As the Society expanded public transport was used, and bicycles were bought by the Society in 1903 and used in inner areas until 1945. During the Spanish flu epidemic, in 1919, MDNS appealed for assistance to procure Motor vehicles so the Nurses could visit an influx of cases. Through trusts, grants and donations four 'Ford T Model' cars were procured which enabled the Nurses to triple their visits. Through constant use the cars were in such a poor state two were sold in 1922 and the others later. In 1922-23 three Peugeot cars were purchased and a female Chauffeur, 'Miss Sword', was employed who lived in the Home and was also in charge of the garage. MDNS was expanding, and In 1929 Melbourne District Nursing Society (MDNS) formed a volunteer Motor Auxiliary to transport their Trained Nurses (Sisters) to make visits more patients who lived a distance away. At first wealthy people offered their car and chauffeur, but then the general public supplied their own vehicles. They operated on week days when able and could take up to three Sisters at a time, collecting them from the Nurses Home, 39 Victoria Parade, Collingwood, at 9 a.m; dropping each Sister at a patient then picking them up and taking them to the next patient before completing the morning round and returning to the Nurses Home at 1 p.m.. The Sisters were able to double the number of visits they did each morning and did their afternoon visits on public transport. At its peak there were 60 volunteers but this fell off during World War 11. In 1944 the Red Cross were assisting, and by 1953 were taking out 16 MDNS Sisters. Appeals for volunteers occurred over the years, particularly during the Tram and Tramway Bus strike in the 1950s, and when the Royal Women's Hospital had an influx of births and wanted to send the mothers and babies home on day four but could not do so if M.D.N.S. could not visit. During 1962 the Motor Auxiliary transported 34 Sisters who preferred not to drive themselves, but as the MDNS fleet of cars grew there was less need for their service and the Auxiliary was disbanded in 1971. Some Sisters used their own cars; even a motorcycle was used by one Sister in 1933. All these forms of transport were intermingled and in the early 1950s, and now as Melbourne District Nursing Service, seven Ford Prefect cars were bought followed by twelve Ford Anglia cars 1955. Having received Royal patronage; the now Royal District Nursing Service (RDNS) had its own fleet of Holden vehicles by the mid 1960s and the Motor Auxiliary ceased operating in 1971 as by then all staff employed were required to have a driving licence. Seat-belts had been introduced to Victoria in 1959 and District fitted them to their cars from 1962, even though they did not become compulsory until 1970. The Holden vehicles were replaced with grey Holden Torana vehicles. After several years the fleet was changed to white Toyota Corolla vehicles. The Melways Directory of maps was introduced in 1966, which was a boon to the Sisters, though it was a few years before it went beyond Seville, so a large paper map was used by the Sisters visiting patients in the areas passed Seville. By 2009 there were 598 cars in the fleet and the Sisters travelled 9 million 200,000 kilometres – this is equivalent to 12 trips to the moon and back. IA black and white digital image showing, in the left foreground, the frontal view of an early model, 1920s, soft hooded car parked on the road next to the gutter. Two front spoked wheels are seen, and headlights sit either side of the radiator at the front of the nose shaped bonnet.. '3758' is written in white on the black number plate below the radiator. The female Chauffeur is dressed in a dark coat and peaked hat and is standing by the partly open driver's door. The passenger door is open and a Melbourne District Nursing Society (MDNS) Sister is standing on the footpath behind the door. Another Sister stands behind her. There is another similar car parked behind the first one. It is partly obscured, its hood is down; it has spoked wheels and one of its headlights can be seen beside the partially obscured radiator. Part of the black number plate can be seen with two of its numbers, '69', written in white. A partly obscured Sister is standing by the driver's door and another behind the open passenger door. Another Sister is standing at the rear of this car..The five MDNS Sisters are wearing their uniform grey coats and felt brimmed grey hats with a Maltese cross applied to the centre hatband, Leafless trees and some buildings can be seen in the background.melbourne district nursing society, after-care home, rdns, royal district nursing service, mdns motor auxiliary, mdns uniforms, miss sword, female chauffeur

Photo of a display of hand made toys (wooden trains, doll cribs, children's chairs, soft balls and dolls made by Victorian school children). Above them is a sign "I'm a set of wheels for a lucky boy". Appears to be gifts at a Christmas party for Junior Legatees. For many years Melbourne Legacy held Christmas parties for junior legatees - the children of deceased servicemen, often hosted by the Governor at Government House. It came from a Legacy envelope marked P7, 1966. It was an early attempt at building an archive. The contents were described in red pen as: 1 Christmas Party / Govt House 2 Toy presentation Dept of Education 3 Residence Christmas party 3 HMAS Cerberus / Operation Float / Operation Firewood (added in blue pen). (these other items will be items 00411 to 00416)A record of the items and events provided to Junior Legatees.Black and white photo of handmade toys.Stored in an envelope marked P7, listing it's contents in red pen and 1966 in pencil.christmas gifts, junior legatee outing

Compiled and published by the Melbourne and Metropolitan Tramways Board, closing Monday 10 May 1977. Details the conditions of tender, conditions of contract, notes, specifications, gives background information about Melbourne, dimensions, performance, drivers and conductors, trucks, wheels, brakes, electrical equipment, control panels and drawings. The drawings give a map of the system, typical city route, Glenferrie Road route (grade diagram), concrete track construction, min. radius curves, loading gauge, all-electric tram and mounting details for the trolley base, schedule of prices, tender form, form of contract, and schedule of information to be provided by the tenderer. Includes an Alphabetical Index. Includes a drawing for a single-ended version of the tramcar. Became the Z3 class following the addition of a rear or 3rd door. Yields information about the 1977 tender for 100 electric tramcars that became the Melbourne Z3 class tram.Comb bound (white plastic) specification or tender document, approx 180 pages, with glossy card orange covers, titled "Tender Schedule for Electric Trams" and "Contract 3000". "1977" on front cover in ink.tramways, tramcars, z3 class, specification, tenders, mmtb, melbourne, single ended tramcars

A Kew Patriotic Carnival was held in Victoria Park in 1941. The event was promoted in the Argus newspaper as: "KEW CARNIVAL - A carnival, at which more than 25 local organisations will co-operate in raising funds for Kew Patriotic Society, will be opened at Victoria Park. Kew this afternoon. The carnival will begin at 2 p.m. to-day and will continue to-morrow. There will be afternoon and evening sessions each day. Arrangements have been made for open-air dances, bicycle races, athletic events, tennis tournaments, folk dancing, miniature golf, and a shooting gallery. Flowers, sweets, cakes, and re-freshments will be sold at stalls conducted by auxiliaries, and lucky envelopes, darts competitions, spinning-wheels, and games will be among the attractions." The Argus (Melbourne) Friday 28 March 1941, Page 6.Rare example of Second World War local Kew memorabiliaPatriotic button. Kew Patriotic Carnival March 28-29 1941. Victoria Park. Numbered 2427. The design incorporates the British and Australian flags.Title: "Kew Patriotic Carnival, Victoria Park, March 28-29 1941". Number "2427"kew patriotic carnival, patriotic buttons, ww2

This machine was used by the State Electricity Commission of Victoria on the Kiewa Hydro Electric Scheme by office workers who worked in the payroll office.The State Electricity Commission of Victoria used the latest technology available for office equipment on the Kiewa Hydro Electric Scheme. This machine was used in the payroll office.Black metal table with machine on top. Electric motor with belt drive to machine which is situated under the rear left side of the table. Safety metal mesh protects the leather belt and is at the rear of the table. The operator faces the machine which has a tray on the left and is divided longitudinally into two and holds new shiny metal plates on each side. There is a brown bakelite wheel on the left and two printing wheels inside a myriad of moving parts that enable the metal plates to be embossed with payroll information i.e. "Gang No. etc. / Names / Pay No. / Rate type. This has to be checked out each time / Date"ULQ 11 10"state electricity commission of victoria. kiewa hydro electric scheme. payroll office. office work. payroll machine. office equipment

A green cloth hard cover book. Title and author's name are engraved in gold on spine. This is the 3rd edition, first series with black and white illustrations. It describes the engineering practices of the early days of British railroads. The book includes (series 1 to 4)and it contains, roads, tramroads and railroads, bridges, aqueducts, viaducts, wharfs, warehouses, roofs, and sheds, canals, locks, sluices, & the various works on rivers, streams, etc., harbours, docks, piers and jetties, tunnels, cuttings and embankments, the several works connected with the drainage of marshes, marine sands, and the irrigation of land, water-works, gas-works, water-wheels, mills, engines.civil engineering, railway practice, rail constructions, s c brees, western railway great britain, public works, railroads, canals, s.c. brees, samuel brees, samuel charles brees

Set of two instructions, both printed on foolscap duplicated paper in blue ink. .1 - "Notice to One-Man bus operators - Increase in Fares as from Sunday 27th September 1964", detailing both the ordinary and children's fares. Includes instructions regarding prepaid tickets and Gibson ticket machines that are pending the delivery of new printing wheels.. Dated 17/9/1964. .2 - "Notice to Conductors and Conductresses - - Increase in Fares as from Sunday 27th September 1964" - as above, except tickets issued in the city by the Ultimate ticket machines - how the values were to be made up. Dated 18/9/1974trams, tramways, tickets, ticket machines, ultimate, gibson ticket machines

The "Burroughs Calculator" was a non-printing key-driven machine introduced in 1912 in response to the success of the Felt & Tarrant "Comptometer". The first Burroughs key-driven machine was very similar to the Comptometer in its external appearance, but was quite different in its internal mechanism, with the register and carry mechanism based on a complex system of planetary gears. It was only about two-thirds of the weight of the Felt & Tarrant machine, and had none of the safety features. In particular, there was no protection against incomplete keystrokes in either direction. The register would simply advance in proportion to the depth of stroke, with no indication of error. However, the price was also about two-thirds of the Comptometer, which made it quite a popular (if dangerous) machine. (http://home.vicnet.net.au/~wolff/calculators/Burroughs/Burroughs.htm) The Burroughs Portable Adding Machine introduced in 1925 became the basic design for the adding machine for many years, until the ten key adder was introduced and started to replace it gradually. The key-driven type machine did not print, and while it was often used as an adding machine, it developed into a special purpose machine in later years. The machine was very fast . The efficient operation of these machines required an experienced operator who often received a high salary. The machine was produced over a very long period because of its unique capabilities and was often used to verify product delivery lists from delivery routes. Later models of the machine, called a duplex design, could hold a running total in a second set of dial wheels while the primary wheels continued to add and subtotal amounts that could be transferred at any time to the running total. A side note, Burroughs copied the Felt design for its first models and was sued for patent infringement by Felt and Tarrant who prevailed in the suit. As a result, Burroughs totally redesigned their machine and went on to compete with the Felt machine for decades. Info from (http://www.burroughsinfo.com/group_d.htm) Black metal low keyboard manual adding machine. The key-driven type machine did not print, and was exceedingly fast and experienced operators could easily outrun an operator on a full keyboard or 10-key adding machine. The adding machine has a brown leather carry case.calculator

Yields information about the tramcars following the cessation of tram services in Ballarat - trams being sent to new homes and how this was done.Black and White copy photograph of a newspaper photograph taken by The Courier - photo taken 2/09/1971, published 3/09/1971 of No. 33 leaving the depot for Hamilton (first tram to depart depot). No. 33 has been separated from its truck or wheels and loaded onto a C. F. Tonissen of Hamilton truck. A sign on the tram reads "From Ballarat to Hamilton's Museum". Has the depot in the background. Collected by Alan Bradley from the Ballarat Courier early 1980's. See item 9520 for the newspaper cutting. See Excel file "Record of Ballarat Courier Photos SEC era" (Archive Documents) for source of details.tramways, trams, depot, hamilton, closure, transport, tram 33

Digital image from the Wal Jack Ballarat Album of the body after sale of ESCo 21, Sebastopol type car at Redan in 1936. the body is sitting on a set of rubber tyred jinker wheels. Indicates how the body was sold at the time by the SEC and then loaded onto a vehicle for transport. For rear of photograph - see image i2. For high res scan of original print see image btm5136i3 and for hi res scan of original negative (N733) see btm5136i4. .1 - Copy print by Dave Macartney added 15/10/2019. .2 - Negative 723 - similar image to above, taken from a slightly different view. See image btm5136i5.On the rear has "Taylors Super Snaps Ballarat" stamp on rear.trams, tramways, sebastopol type, esco, disposal, sale of trams, tram 21

Four wheel flat top track trolley- deck wood frame and sides on four fabricated/pressed wheels, with bearings, axles- Used to transport materials- hand pushed or towed. Metal tie rods in front over axles and metal has connecting tow/couplers. Relocated to Bungaree c2015 when 22 moved. Photographed at Bungaree 6-4-2020 by Neville Britton, see image btm18i1.jpg. Record updated 6-4-2020. See detailed information on back of sheet in folder for sketches, timber damaged, notes re a number plate and a note regarding work done 7/97 in replacing underside diagonal bracing supports.On underside in paint, "To Cargeeg, 50 Pasadena East Bentleigh, Melbourne"trams, tramways, commonwealth railways, maintenance equipment, railway trolley

Handwritten copy of mining accident. Wire Ropes in Mines. Accident at Gt. Northern - Bdg'n 8/6/1899 Page 14. Mining Accident at Windmill Hill. Geo. Watson of Cal. Gully was hauling a truck of dirt, and whilst engine was in motion, he started to wipe the crank with a piece of waste. His arm got caught between the conrod & crank and was badly crushed. He managed to free it and stop the engine before the cage got to the wheels. He was taken to hospital. Bones fractured in one or two places. Document from Albert Richardson Collection of mining history. Document from Albert Richardson Collection of mining history.document, gold, windmill hill, windmill hill, mining accident at windmill hill, gt northern, bdg'n 8/6/1899 page 14, geo watson, albert richardson

Two sheets or four pages from The Herald Sun, 19/4/1995 about the Parade of historic trams in Swanston St that day, titled ”Tram Day - A Celebration of Trams” , with event details, some history of the tramcars and an item “Our Landmark on wheels” written by Keith Dunstan - about his thoughts on Melbourne and its trams, cable trams and that they are a Landmark (see also reg Item 1873). Photos of V214, HTT 8, S 164, B1 2001, L 104, W2 510, W 380, X2 676. Has advertisements from ABB and Gonanin. see Reg Item 3639 for some photos of the event.trams, tramways, melbourne, tourism, w class, parades, swanston st, tram 214, tram 8, tram 2001, tram 104, tram 510, tram 380, tram 676

The P. S. Edwards was built in May 1875 by J. M. Webb, Echuca. Official number 73287, made of wood, with paddle wheels at the side. 78 gross tons, 27 nett tons. It was altered in 1916 , after cabin removed 48 gross ton. It had 7 different owners before being purchased by R. J. Evans, of Evans Bros. Saw Mill, Echuca, in 1919. The P. S. Edwards was sunk at Echuca in the spring of 1958 and then raised in January 1981 and then was being restored by Geoff Evans in 1985 (Parsons, Ronald. Ships of the Island Rivers. 3rd ed. 1996. p.67) The barge Ada was built in 1899 at Echuca by the Permewan Wright Company. The Ada hull was built of part wood and part steel, to protect the wool from becoming wet on the voyage down the Darling River to the Echuca Wharf. The Ada was used as a logging insider barge as well as a wool barge with the Pevensey on the Darling River.The P. S. Edwards has historical and social significance being a paddle boat built in Echuca. The P. S. Edwards was built in May 1875 by J. M. Webb, Echuca. It had 7 different owners before being purchased by R. J. Evans, of Evans Bros. Saw Mill, Echuca, in 1919. The P. S. Edwards was sunk at Echuca in the spring of 1958 "and as the mill was burnt in 1959 salvage was not attempted. She was raised in January 1981 and in 1985 was restored by Geoff Evans. While owned by Evans Bros, was used to bring red gum from the Barmah Forest to the sawmill in the barge Clyde." (Parsons, Ronald. Ships of the Island Rivers. 3rd ed. 1996. p.67) The barge Ada was significant because of the construction of the hull, being part wood and part steel. The Ada was used as an inside looking barge as well as a wool barge with the P.S Pevensey on the Darling River. The barge Ada is still on display at the slipway at the Port of Echuca. A black & white photograph of the P. S. Edwards towing the barge "Ada". A large tree is in the foreground and frames the boats. The boats are on a bend in the river. The barge appears to be laden with timber.In blue pen on reverse of photograph are written the words ? Adelaide (crossed out) Edwards & Ada barge ID4. Geoff Evans ? ( also crossed out). port of echuca, p. s. edwards, evans bros saw mills, ada barge, wool industry, p.s pevensey, darling river

Ken Peeler (at head of horse), Ken's father, Ern Peeler and brother Don Peeler (sitting on load) with dray-load of 'five-foot wood'. Peeler's Road, Barkers Creek. Photographed by Alice 'Girlie' Adams, approx. 1942. Families living at Barkers Creek and Woodbrook obtained contracts to supply 'five foot wood' to Thompson's Foundry and Castlemaine Woollen Co. Rows of wood, neatly stacked, 10’ high X 5’ wide covered many acres at each factory, ready for use in firing the boilers. Much bushland was thus cleared for orchard or pasture. The horse depicted is fully harnessed with bridle, eye-winkers and reins, dray collar, hames, shaft saddle with girth & pole straps and breeching straps. Neatly stowed under the dray shafts can be seen the props, used to keep the dray horizontal when the horse was to be taken out of the shafts. The dray was almost entirely constructed of wood, with steel tyres on the wheelsA reminder of the significance of local sources of fuel to some of Victoria’s biggest manufacturing concerns as well as depicting a major source of employment involving minimal capital. A B&W photograph depicting 2 men and a boy with a horse-drawn dray filled with wood. Photograph taken by Alice 'Girlie' Adams in 1942. Ken Peeler, Ern Peeler and Don Peeler appear in the picture along with a horse with no known name.

Legatee Donovan Joynt at the opening of the Puckapunyal Sportsman's club that was named after him. The notes, dated March 1983, could have been for a newspaper article. "IT'S A HELPING HAND... for one of Australia's most distinguished soldiers outside his own memorial at Puckapunyal. Sapper Mark Drummond of Seymour, a member of 21st Construction Squadron, which built the Memorial, holds an umbrella and commander 3rd Military District, Brigadier Geoff Cohen of Canterbury, wheels Lieutenant Colonel Donovan Joynt VC to lunch. Lt Col Joynt, 94, donated more than half the cost of the $130,000 Donovan Joynt VC Memorial Sportsman's Club in the background. The building had just been officially opened by the Chief of the General Staff, Lieutenant General Sir Phillip Bennett of Canberra." See also Cat Nos. 01303, 01349-51 and 01588 which is an album that contained lots of details about his life.Part of the collection of material held by Melbourne Legacy on Legatee Donovan Joynt, a prominent Australian and VC winner.Black and white photo of L/- Donovan Joynt in Puckapunyal with paper notes taped to the backBack of the photograph has grid lines ruled in blue biro together with annotations 'B/C Pic.3' and '55 x 56' Notes are annotated M1306 in blue biro.donovan joynt, memorial

Book - 10 pages + 13 drawings sheets of rail cross sections contained within separate printed covers (colour fleck), titled "British Standard - Tramway Rails and Fish Plates - Standard Sections and Specification - July 1903". Side stapled and then bound with a green tape on left hand side. Gives details of the standards of the materials, rolling, payment, conformity, testing, marking holes for both rails and fishplates. Drawings for 13 different weight rails, straight and curves, 90lb/yard to 116 and a drawing of the BS tyre profile for tram car wheels and how it interfaces with a rail. On rear cover, both sides gives a list of standards and foreign translations up to March 1919.On top of first sheet in black ink "Ballarat Tramway Preservation Society Catalogue No 8."trams, tramways, british standards, standards, rails, fishplates

Set of 8 colour prints of a tram cavalcade in Swanston St Melbourne - 19/4/1995 about the Parade of historic trams in Swanston St that day, titled ”Tram Day - A Celebration of Trams” , See Reg Item 1876 for event details, some history of the tramcars and an item “Our Landmark on wheels” written by Keith Dunstan - about his thoughts on Melbourne and its trams, cable trams and that they are a Landmark (see also Reg Item 1873).. .1 - HTT 8 with the Melbourne Town Hall in the background. .2 - 104 ditto .3 - horse tram 256 with No. 8 behind .4 - 774 .5 - 862 .6 - 217 .7 - 431 .8 - 380trams, tramways, melbourne, tourism, w class, parades, swanston st, events, horse trams, tram 8, tram 104, tram 774, tram 862, tram 217, tram 431, tram 380, tram 256

A tyre bender is used to bend and shape metal rims for wooden wagon wheels. This tyre bender’s model first appeared in the Day Bros catalogue in 1884 as the “Giant” model. The catalogue of 1883 only showed a lighter duty model called the “Lion”. It can be assumed that this later “Giant” model was a heavy duty improvement over the 1883 "Lion" and other smaller models which were still being advertised for sale in 1884. The Day Bros foundry, makers of this tyre bender, was operating as the manufacture of wheel right and blacksmith tools and general machinery in the 19th century in the USA and successfully exported their goods all over the world. Wagon tyre benders would have been very common circa 1850-1920, so there were probably many makers over the years. Early on, it would have become clear to the blacksmiths about which designs worked best so, eventually, the various makers would have made similar products to each other. This tyre bender was once used by Harry Goodall of H. Goodall & Sons Pty. Ltd. corner of McKinnon and High Streets, Terang. Victoria. Henry Goodall & Sons Henry Goodall (1870-1936) was proprietor of garages as H. Goodall & Sons Pty. Ltd., at both Terang (McKinnon and High Streets) and Mortlake (Dunlop Street). His business was in operation in at least in 1916 and perhaps well before, considering the date of the tyre bender and its use for wagons with wooden wheels. It was still in operation in 1953, chasing up debtors in Mount Gambier Court. Amongst the employees of H. Goodall & Sons Pty. Ltd. was Ernie Entwistle, a blacksmith (a soldier who died in 1916 ) and Alfred Hodgetts, radio expert (killed in a fatal accident in 1943, when he was in his early 30s ). Henry Goodall was involved in the community as a Justice of Peace, a deputy coroner, President of the Mortlake Hospital, trustee of the Soldiers’ Memorial Hall, and as a prominent Freemason. He and his wife had two sons (Charles and John) and one daughter (Mrs. Chas. Newton, of Skipton). The tyre bender is significant as it demonstrates how blacksmiths or wheelwrights could make new metal rims for wagon wheels for carts, wagons, stage coaches and carriages over a 135 years ago. The machine is a part of our social history as it demonstrates part of the process of making wagon wheels, which played an important part in aiding the continuation of daily transport needs that people had at the time, such as farming, personal transport and commercial activities. The machine or tool is locally significant as it was used by a local company in Terang and Mortlake in their blacksmith, wheelwright and garage business. Steel tyre bender mounted on timber base, used for wagon wheel steel rims. Made from cast iron and steel, double geared with four cogs to unite the upper and lower steel rollers. There are adjustable guide collars to keep the iron in line while it is being bent. It can also be used with two cranks for heavy duty work utilising the use to two operators. It is the Giant model, made in 1884 by Day Bros. of Philadelphia. This tyre bender once belonged to Harry Goodall & Sons, blacksmith's of Terang. Victoria. “DAY BROS. PHILAP. PA” cast into the side of machineflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, machinery, wagon wheel, wheelwrights, blacksmith, steel rim wheels, tyre bender, tire bender, the giant tyre bender, henry goodall (1870-1936), terang, wheelwright tool, blacksmith trade, blacksmithing equipment and supplies, wagon tyre bender, day bros. philadelphia pennsylvania, h. goodall & sons of terang, terang blacksmith, h. goodall & sons pty ltd, mortlake, ernie entwistle blacksmith, alfred hodgetts radio expert, charles goodall, john goodall, mrs. chas. newton nee goodall