"Herbert Rex Wills" Reg. No.342872. Service details. Refer Cat No. 5231.3.1. Jacket, Khaki colour wool/ polyester fabric, service dress style, no buttons. Collar, shoulder epaulettes, four front pockets, top with concealed buttonhole and two metal press studs on flap, lower button hole on flap. Sleeve Insignia Australian Coat of Arms embroidered on khaki patch, gold green, blue, red, black and white thread for Warrant Officer First Class. grey colour polyester fabric lining with manufactureres white cotton label inside left. 2. Belt, Khaki colour, wool/polyester fabric with holes and gold colour plastic buckle. Leather strap and button belt keeper. 3. Trousers, khaki colour wool/ polyester fabric, service dress style with fob pocket, two side pockets and one back pocket. Green colour polyester fabric waist and pocket lining with manufacturers white cotto label inside, on back pocket.1,&,3. All print illegible.uniform, army, service dress, rex willis

This razor strop is called a paddle strop. ABOUT STROPS Straight razors and cut throat razors were the major tools for shaving before the safety razor was invented in the 1880’s and even today specialty shaving shops still sell the straight razors. Along with the razor, the process of shaving would commonly involve lathering up shaving soap using a shaving brush with boar bristles. Men could own several razors and rotate them through the week and some shops sold the razors in a set, a razor for each day of the week. Straight razors could require stropping more than once during the shaving of a heavy beard, and stropping would also be performed at the end of each shave. Honing would only be performed two or three times a year, preserving the blade’s edge. A lot of skill was needed to hone and strop the blades of these early razors and the methods to do so were a large part of the curriculum in Barber colleges. The razor would be sharpened on a grinding wheel then honed on sharpening stone and finally finished using a strop. Straight edge razors would usually be sold unfinished and that process would be completed by the customer. A razor strop, usually made from leather, thick canvas or light timber, would be used to straighten and polish the straight razor for shaving. Strops could also be used to polish other blades such as knives, small metal tools and chisels. Sometimes an abrasive polishing compound is also used to give a mirror finish. Some strops, such as this one in our Collection, are designed to be used while hanging from a nail or peg, while others are hand held. To use the strop draw the spine of the blade down along the strop with the blade following, without putting any pressure on the blade. At the end of the stroke, rotate the blade over its spine then draw the spine along the strop again so that the edge moves away from the top. The finer grade of leather strap is used to give the final finish. Wooden paddle strop, (or raxor strop or cushion strop). Strop has two leather sides, numbered 1 and 2, on a slotted paddle. Marked on handle “Hamon”. Sides are numbered 1 and 2. Has two slits in body of strop. "Hamon" stamped on handle. "Hamon" stamped on handle. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wooden strop, paddle strop, strop, razor strop, shaving accessory, barber's equipment, personal grooming

This razor strop is called a paddle strop. ABOUT STROPS Straight razors and cut throat razors were the major tools for shaving before the safety razor was invented in the 1880’s and even today specialty shaving shops still sell the straight razors. Along with the razor, the process of shaving would commonly involve lathering up shaving soap using a shaving brush with boar bristles. Men could own several razors and rotate them through the week and some shops sold the razors in a set, a razor for each day of the week. Straight razors could require stropping more than once during the shaving of a heavy beard, and stropping would also be performed at the end of each shave. Honing would only be performed two or three times a year, preserving the blade’s edge. A lot of skill was needed to hone and strop the blades of these early razors and the methods to do so were a large part of the curriculum in Barber colleges. The razor would be sharpened on a grinding wheel then honed on sharpening stone and finally finished using a strop. Straight edge razors would usually be sold unfinished and that process would be completed by the customer. A razor strop, usually made from leather, thick canvas or light timber, would be used to straighten and polish the straight razor for shaving. Strops could also be used to polish other blades such as knives, small metal tools and chisels. Sometimes an abrasive polishing compound is also used to give a mirror finish. Some strops, such as this one in our Collection, are designed to be used while hanging from a nail or peg, while others are hand held. To use the strop draw the spine of the blade down along the strop with the blade following, without putting any pressure on the blade. At the end of the stroke, rotate the blade over its spine then draw the spine along the strop again so that the edge moves away from the top. The finer grade of leather strap is used to give the final finish. Wooden strop, paddle strop design (sometimes called razor strop). Has leather attached to one side. Has two slits in body of strop. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, strop, paddle strop, personal effects, shaving equipment, razor strop, barber's equipment

This razor strop is called a paddle strop. ABOUT STROPS Straight razors and cut throat razors were the major tools for shaving before the safety razor was invented in the 1880’s and even today specialty shaving shops still sell the straight razors. Along with the razor, the process of shaving would commonly involve lathering up shaving soap using a shaving brush with boar bristles. Men could own several razors and rotate them through the week and some shops sold the razors in a set, a razor for each day of the week. Straight razors could require stropping more than once during the shaving of a heavy beard, and stropping would also be performed at the end of each shave. Honing would only be performed two or three times a year, preserving the blade’s edge. A lot of skill was needed to hone and strop the blades of these early razors and the methods to do so were a large part of the curriculum in Barber colleges. The razor would be sharpened on a grinding wheel then honed on sharpening stone and finally finished using a strop. Straight edge razors would usually be sold unfinished and that process would be completed by the customer. A razor strop, usually made from leather, thick canvas or light timber, would be used to straighten and polish the straight razor for shaving. Strops could also be used to polish other blades such as knives, small metal tools and chisels. Sometimes an abrasive polishing compound is also used to give a mirror finish. Some strops, such as this one in our Collection, are designed to be used while hanging from a nail or peg, while others are hand held. To use the strop draw the spine of the blade down along the strop with the blade following, without putting any pressure on the blade. At the end of the stroke, rotate the blade over its spine then draw the spine along the strop again so that the edge moves away from the top. The finer grade of leather strap is used to give the final finish. Wooden strop, paddle strop design (sometimes called razor strop). Has leather attached to one side. Sides are numbered 1 and 2. Has two slits in body of strop. Stamped Hamon Paris France. "Hamon Paris France. "flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, paddle strop, strop, shaving equipment, personal effects, barber's equipment, personal grooming accessory

Typical British and Commonwealth full dress cap for 1950sBlack peaked cap with black wool crown and red piping and hat band. Royal Australian Artillery gilt cap badge. Black patent leather chin strap with 13mm dia. brass AMF buttons. Black patent letter peak with 20mm gold wire edging and green undersides. Tan leather sweat band. Tan cloth lining with green printed manufacturer's name and purple stamped details Green printed. "Hobson & Sons (London) Ltd. Purple stamp. "1952 6 7/8 Made in England" Note - no personal markingsheadgear, cap

17th Light Horse Regiment, Bendigo.Round leather carry case with strap & metal window, metal buckles attaching strap to case, metal studs fastening straps to case, gold coloured disc attached to strap.On carry case: “M.1” On gold coloured disc: “1”containers - military, trades-leatherworking, passchendaele barracks trust

Excellent example of first aid 'in the field' in WW2Canvas bag with strap and leather trim; press stud fasteners. Interior has 5 small pockets and large front pocket (contents described separately-359-2 etc)labelled 'Sanax' First Aid

A group of items including an identification tag on a leather wrist strap, flask and boot hook. Also a circular ID tag possibly made to be worn around the neck. Also a Ypres souvenir that seems incomplete. These were with other World War 1 memorabilia that has come from Private John Basil McLean, 2nd Reinforcements, 37th Battalion, A.I.F. Possibly these were with him during his time in the First World War and he kept them as a mementos. J.B. McLean (Service No. 13824) was from near Maffra, Victoria and enlisted on 22 January 1916. He embarked on 16 December 1916 for Europe. He spent time with the Australian Field Artillery (Pack Section). At the end of the war he worked for a year at the A.I.F. Headquarters in London before returning to Australia on the 'Ceramic', arriving in Portsea in 1920. His full war record is available from the National Archives of Australia (B2455, MCLEAN JBM).Mementos brought back with a soldier after serving in Europe in World War One.A metal flask, an identification tag, a boot hook, a circular identification tag, a souvenir from Ypres all from the collection of JB McLean.01126.1 Flask has monogram 'JBMCL' engraved on it. 01126.2 Identification tag has 'No. 13824 JB M McLean, ASC, AIF, RC' engraved on it. 01126.3 The boot hook has 'BAILLEUL' engraved on it. 00126.4 The circular tag with a central star has 'PTE J B M McLean A Coy 37 Bat' pressed into the metal. 00126.5 A metal tube with the letters 'Ypres' adhered to the outside. world war one, souvenir

Hard fawn coloured cover with dotted cross lines dispersed overall. There is a blue leather binding strap & 2 eyelets on spine. Pages are black cardboard with 2 photos per page. The pages have worked loose due to no binding cord. There is white handwriting adjacent to each photo. Subjects include Jerusalem religious buildings, Tel Aviv, beach scenes, Australian soldiers on leave, Palestine farm labourers, Tiberias local people.album, photograph, religious

These goggles and helmets were issued to flying recruits for learning to fly biplanes.Leather helmet with suede lining, under chin strap, earphone inlets with snap locked flaps. Metal framed goggles with leather surrounds, adjustable rubber strap and split glass lenses.Made in England Patent. R51067 scratched into metal.

wORN BY MEMBERS OF THE 6TH Battalion Royal Melbourne Regiment Worn by an anticedent unit of the battalion Black bearskin hat made from the skin of American Black Bears,with brown leather and metal chin strap, and black leather inside cap with drawstring. 12cm tear to top of bearskin. no inscriptions or markings, white sticker with 'swan club'. bearskin hat

Part of the Reverend Chaplain Major Thomas Bruce Williams, No 556101, Collection.Australian Army felt slouch hat with seven fold khaki puggaree. A brass clip is on the left side to allow for the brim to be pinned up. No chin strap. Brown leather sweat band on the inside.Stamped on the leather sweat band in gold lettering: 'Bardsley hats, 1991 (upwards arrow), FURFELT, 57'slouch hat, headwear, major thomas b. williams

Made of leather and placed on either side of a horse's eyes and attached either to a bridle or an independent hood. Used by farmers, carters, bullock drivers etc specially when the horse is in a team of horses.Used by farmers in the Kiewa Valley.Drag Blinkers, also known as binders or winkers. Used beside the horse's eyes so that the horse can only look forward and not be distracted by other horses in the team. Straps are leather with steel buckles.horse blinkers, horse equipment

Collar box and collar. Leather circular box with strap around body and plated buckle. Lid is attached to box. Contains 1 starched white detachable collar. Collar has markings inside.Printed inside the collar " Rexbilt" and "16½" x1¾""flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, collar, collar box, starched collar, gentleman s collar, detachable collar

Leather and steel bridle, with leather blinkers and nose strap. Blinkers are domed for extra space against head. Two leather belts to go over horses head and neck, steel chain at bottom.No visible markingsrural industry, agriculture, bridle, blinker, horse, farm, plough, leather, steel

A prismatic compass is a common navigation and surveying instrument which was used extensively by the Forests Commission The compass most commonly used to run a traverse line. The compass calculates bearings of lines with respect to magnetic needle. A magnetic deviation correction was needed to convert the reading to a true bearing The compass could also determine angles between the traverse and waypoints (such as hilltop features). Commonly used for navigation. Largely replaced by modern GPS technology.Ex Army WW2 prismatic compass with leather case and strap. Rugged design and made of metal the internal compass plate floats on oil to help it stabilise The user lines up the direction of travel with the hair sightline in the fliptop cover and readings are taken through the viewfinder prism (hence the name).forest measurement, surveying, forests commission victoria (fcv)

Use to identify a tramway employee, involved in signalling duties and available for all lines on the Tramway Board and MMTB systems. Demonstrates the method of identifying MMTB employees involved in signalling duties.Round pressed brass badge with the words "Signalman" pressed into the centre of the badge, and around the top part "17 - All lines" and the Tramway Board logo on the bottom. A leather button hole strap has been fitted to the rear of the badge. The words have been infilled with a black enamel paint.badges, mmtb, cable trams, tramway board, signalmen

Use to identify a tramway employee, involved in equipment testing duties and available for all lines on the Tramway Board and MMTB systems. Demonstrates the method of identifying MMTB employees involved in equipment testing duties.Round pressed brass badge with the words "Tester" pressed into the centre of the badge, and around the top part "4 - All lines" and the Tramway Board logo on the bottom. A leather button hole strap has been fitted to the rear of the badge. The words have been infilled with a black enamel paint.badges, mmtb, tramway board

This is an original policeman’s helmet, known as a ‘Wolsley’. The design was in use by Victoria Police from 1877 to 1947 then replaced by more suitable caps. The helmets were made in Ballarat by the Victoria Police's official supplier, A W Sudweeks. Some of these helmets were re-sold at Stokes and Sons in Melbourne and would carry that company’s name. This Victoria Police helmet represents an early era in its uniforms, from 1877 to 1947, when the design was based on the English versions. The design was later replaced by head wear that better suited the local climate and conditions. Helmets of a similar shape to this one were worn by the local Volunteer Corps.Policeman’s helmet, Victoria Police. The black, stiffened canvas hat has a high crown and a leather chin strap. The five panels of stiffened canvas are stitched together. The helmet has a metal ventilation dome at the top. The two small holes at the front are for the officer’s identification badge. The helmet has a leather sweatband, and the brim and sweatband are lined with beige fabric. The helmet’s brim is wider at the front. A maker’s label in the shape of a shield is attached inside the helmet, which is made by A.W. Sudweeks of Ballarat. "A. W. SUDWEEKS / MANUFACTURER / BALLARAT"flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, police, victoria police, police uniform, policeman's hat, helmet, policeman's helmet, wolsley, law and order, victorian government, bobby, stokes and sons, official supplier, government supplier, a w sudweeks, ballarat

This parasol belonged to Clara Johnstone Miller (nee Bell, 1866-1910). Clara was the only daughter of Mr James Bell, a councillor of the Shire of Leigh (today a part of Golden Plains Shire) and owner of Woolbrook Homestead in Teesdale, near Geelong. In 1888, Clara married prominent businessman, racehorse owner, racing identity and pastoralist Septimus Miller (1854-1925). Septimus was the sixth of seven children born to Henry 'Money' Miller and Eliza Miller (nee Mattinson). 'Money' Miller was a well known financier and politician and reputedly one of Australia's wealthiest people in his time. In 1889, Clara and Septimus moved into the house 'Cantala' in Dandenong Road, Caulfield. They had one child, Gwendoline Stewart Miller, who died in 1902 at the age of thirteen of diabetes - a largely untreatable condition at the time (insulin would not be discovered until 1921). Clara died in 1910, aged only 44. Septimus subsequently married Helen (nee Henderson), with whom he had a son, Ronald (1915-1990). The Millers were buried in the Brighton General Cemetery in a large Gothic-style vault. Upon Clara's death, Septimus sent much of her clothing and Gwendoline's to her mother Mary Bell. Some of these items were passed down to two of Clara's nieces, Miss Mary Bell and Mrs Lois Lillies, who donated them to BHS around 1973.A black silk, wood and ivory handled parasol from circa 1900. The black silk of the parasol body has been treated with a decorative hemstitch towards the lower edge. The handle and frame are made of wood, metal and either ivory or an early plastic designed to mimic ivory. The ivory section is carved with a design reminiscent of a palm tree trunk and finished with a ball. The handle also features a leather looped strap that the hand would pass through to aid holding the parasol.The handle bears an engraved inscription that appears to be 'VML' in a highly florid script. The frame bears the name 'Hartnells'.clara miller, woolbrook, septimus miller, henry 'money' miller, gwendoline miller, cantala, parasols, caulfield, brighton general cemetery

This case and its contents are believed to have been owned and used by a jockey who rode in the Orbost area. It contained a set of stirrups, two sets of spurs, and two leather jockey leggings.Horse racing as a sport and recreational activity were once part of Orbost's history.A brown leather case, rectangular in shape, a leather handle, with a metal plate on the lid, and leather loops through which straps could be threaded to surround the case. The leather has been tooled with a "crocodile" pattern.leather-case jockey's- case horse-racing

Camera Kodak No. 1A Autographic Junior. Last patent date 7/1/1913. Bellows type. Winged front door with track for lens. Leather covered body. In leather carry case with strap. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, camera kodak no. 1a, kodak camera

Leather, oval shaped hat box (in which is stored a men's silk top hat - 11400.834). Lined in blue velvet, and blue silk. Looped handle, 29cm long, attached with 2.5cm circular metal studs - possibly brass. An oval shaped insert, lined with blue velvet and silk, hold the inverted top hat. This hat was owned by John Sargood ( refer enclosed notes) whose initials are marked on trhe hat-box - J.S. - two cms high. An internal strap of black fabric, has a leather tab at one end with a metal key shaped fastener. Unfortunately the other end is broken off. This strap would hold the hat in the cavity. An outer leather strap, 4cm wide passes over the lid, and fastens at a 6.5cm diameter, circular metal disk with key lock. End of this strap is also broken - a piece of leather is inside the hat box. Strap is marked with a two cm high letter H which lines up with the owners initials when closed J.H.S..Sargood Family Notes in Clothing Box 157.costume accessories, male, leather hat box

This photograph depicts the style of MDNS uniform worn at that time, which was a grey cotton dress and red cardigan, over which was a woolen grey coat. The beret was of grey felt and had a red Maltese cross attached to the centre. Sister Wilson is about to enter her MDNS car, which was one of the early cars in the MDNS fleet, to drive to a patient to give nursing care.Royal District Nursing Service (RDNS) has had various modes of transport over the last 130 plus years. At first, from 1885 as Melbourne District Nursing Society (MDNS), their Trained nurses (Nurses) walked the streets and lane ways amid the slums of central Melbourne. As the Society expanded public transport was used, and bicycles were bought by the Society in 1903 and used in inner areas until 1945. During the Spanish flu epidemic, in 1919, MDNS appealed for assistance to procure Motor vehicles so the Nurses could visit an influx of cases. Through trusts, grants and donations four 'Ford T Model' cars were procured which enabled the Nurses to triple their visits. Through constant use the cars were in such a poor state they were sold in 1927. A Motor Auxiliary was formed in 1929 to take Sisters to patients, and some Sisters used their own cars; even a motorcycle was used by one Sister in 1933. All these forms of transport were intermingled and in the early 1950s, and now as Melbourne District Nursing Service, seven Ford Prefect cars were bought followed by twelve Ford Anglia cars 1955. Having received Royal patronage; the now Royal District Nursing Service (RDNS) had its own fleet of Holden vehicles by the mid 1960s and the Motor Auxiliary ceased operating in 1971 as by then all staff employed were required to have a driving licence. Seat-belts had been introduced to Victoria in 1959 and District fitted them to their cars from 1962, even though they did not become compulsory until 1970. The Holden vehicles were replaced with grey Holden Torana vehicles. After several years the fleet was changed to white Toyota Corolla vehicles. The Melways Directory of maps was introduced in 1966, which was a boon to the Sisters though it was a few years before it went beyond Seville, so a large paper map was used by the Sisters visiting patients in the areas passed Seville. By 2009 there were 598 cars in the fleet and the Sisters travelled 9 million 200,000 kilometres – this is equivalent to 12 trips to the moon and back. Black and white photograph of Sister Jill Wilson of the Melbourne District Nursing Society (MDNS) about to enter her work car. Sister Wilson is wearing her winter uniform, with a light grey beret over her short dark curled hair, and a long light grey coat which has lapels. She is standing side on, and to the left of the partially seen small white car. She is smiling and looking at the camera. Her right arm is extended with her hand on the handle of the partially opened car door and she is holding a white bag and cloth in her left hand. At her feet is her dark coloured, square shaped, nursing case which has a leather strap around the middle and two light coloured clasps each end, as well as a thick hard handle on the top. She is standing on the road and to her left, on the grass, are two lamp posts; small bushes can be seen as well as two trees in the distance. Two dark coloured buildings, one with a hip roof and one a flat roof, can be seen behind the car. rdns, motor vehicle, nurse, uniform, melbourne district nursing society, mdns, rdns transport, royal district nursing service, sister jill wilson

Possibly used as plough winkers on farms in the 19th and 20th century.A pair of vintage leather horse winkers with metal rings and side leather buckles to strap it around the horse's head and eyes. The pole and neck straps are adjustable and can be lengthened and tightened without altering the blinds. The front strap goes around the horse's muzzle. They were possibly Plough Winkers. The bit is missing.horse accessories, horse tack, horses, agriculture

Used in the Kiewa Valley to measure the height of distant points relative to a known point used in surveying and construction. The older levels consist of a telescope fitted with a spirit level and, are generally, mounted on a tripod. Modern levels are automatic.This Cowley automatic level was used in the Kiewa Valley by a Mount Beauty resident."The Cowley" Automatic Level. Automatic Level made of metal with black leather carry strap. Metal plaque with black background fixed with four nails "Cowley Automatic Level. Made in Australia". Stamped under the plaque are numbers 80950. A sticker above the plaque in red print "Warning level will not operate unless placed on tripod." A silver sticker on top of the unit "It is unnecessary to see a complete circle when finding level" it includes three diagrams to assist. Comes in the original cardboard box with instruction booklet. cowley tripod; surveying; kiewa valley

This item(razor) was used by men, only before fashion dictated that women should shave their legs and underarms. There is information that this razor was first used circa 1922 and it lasted up until circa 1958. It permitted the user to have a compact shaving apparatus at hand in any environment. It provided a safe and easy way of sharpening the more permanent blade. This type of razor replaced the straight, open, or cut-throat razors. The mobility of this item was further enhanced by Gillette with their double bladed disposable razor. Time taken(shaving) and costs involved where crucial factors in the ever growing pace of domestic lifestyle in the post 1920s.This historical item presents that, even though the Kiewa Region was an inland rural settlement which in the 1920's was not as close to "modern" fashions and "gadgets", the basic living conditions where still maintained at city levels. This particular razor was in its heyday a sophisticated safety razor and brought down the demand for the services of the "professional" barber(shaver). One of the problems of the superseded straight razor was the high levels of cuts and nicks to the face. As this particular razor was fairly expensive it would have been used by men who were in the middle to upper socio-economical position in Kiewa Valley before the late 1950'sThis item is a Sheffield steel(stamped inside) metal box(Viscount model) containing a red leather fine shaving strap and in its lid a grey honing stone. Both bottom and top lids are removable to allow for replacements of strap and stone. On the bottom lid appears "The Whetter" trade mark, registered in the U.S.A. in 1950.Three bands of a Greek key pattern has been pressed on the lid. A circled identification inscription. " ROLLS RAZOR Ltd, MADE IN ENGLAND" and patented information appears within this inscription. "Patented in England and Abroad. English patents numbers 467383. 284428. 242718. 242717" On the outside of the base lid within a circle are "ROLLS RAZOR" and the sketch of a long haired naked man (side view), crouched, with both hands stretched forward operating the razor. On a slab underneath are the words "The Whetter"safety razor, non disposable, men's shaving implement

Ladies black leather sandal with wide strap across foot and supporting leather around ankle. Leather has reptile-skin type pattern. Shoes are joined together by elastic and still have Rubi label on them Rubi 39shoes, footwear, ladies, sandals, leather