Certificate of Discharge issued to Noel Louis Blundell by the 9th Australian Division Signals, Australian Military Forces. Dated 27th November, 1943. Certificate number 11495. N L Blundell served as a GP1 Wireless Mechanic, he enlisted on the 18th June, 1940 and was on Active Service in Australia for 309 days and Overseas for 689 days.

1937 British Pattern web equipment was commonly on issue to Commonwealth forces including Australia up to the 1970's. Australian military forces changed colour from green blanco to black paint in the early 1960's.1937 pattern webbing belt with natural brass buckles and keepers. Outer surface stained black.Single engraved arrow on each inside surface of the belt fastening buckles. Printed owner's name "G. Boland" Printed identifier of former owner -3/773536(?) and initials "KFH" (?)

Standard issue United States M1 pattern steel helmet, olive drab in colou, stretch cotton cargo type net, with fibreglass liner. On the inside of a strap in the liner '8415-153-6671' is printed in black ink. This number would appear to be the "Federal Stock Number (FSN)" which was used 1949 to 1975 when ti was replaced by "National Stock Number (NSN)' by additional of 00 after the first 4 numbers. this would indicate that it was made in USA. The chin strap and liner are both complete and fully operable. These helmets were first issued in 1941 to the United States Armed Forces. They were adopted after the Korean War by the Australian Defence Force. In the 1990s they were replaced by the Kevlar based Personnel Armour System-Ground Troop (PASGT) type helmet. However, as evidenced by this helmet, some M1 Steel helmets were not replaced in-service by the PASGT helmet and survived into the early 21st Century. Used by Royal Australian Army in Vietnam in areas where mines were significnat, such as Long Hai's mountains (together with US flak jackets), and also by Royal Australain Navy.An example of an Australian Army issue M1 steel battle helmet complete with fibreglass liner. This helmet type was issued to Australian defence personnel during the Vietnam conflict. The inner line has a transfer on the front " Australian Military Forces" with rising sun badge. The steel outer has an olive green elastic cover (similiar to cargo net) to hold camouflage material. The M1 is two "one-size-fits-all" helmets: an outer shell made of metal and a hard hat-type liner that is nestled inside the shell and contains the suspension system that would be adjusted to fit the wearer's head. Helmet covers and netting would be applied by covering the steel shell with the extra material tucked inside the shell and secured by inserting the liner. The helmet is 7 inches in height, width is 9.5 inches and length is 11 inches. The weight of a World War II era M1 is approximately 2.85 pounds including the liner and chinstrap. (From Wikipepedia) the inner line has a transfer on the front " Australian Military Forces" with rising sun badge.steel helmet

Used with dress uniform for ceremonious purposes.An example of the standard issue webbing belt used by Australian service personnel. The name "Bretterecker" and the number 360053, (possibly a post World War 2 service number) is written in black ink on the inside surface of the belt. The belt has been "blackened" for ceremonial use and has brass fittings, the 2 angled buckles normally located on the rear of the belt have been removed. The 1937 pattern equipment (also known as '37 webbing') was an item of military load-carrying equipment. Pattern 37 replaced the 1908 Pattern and 1925 Pattern—on which it was based—and was standard issue for British and Commonwealth troops from its introduction in 1937, throughout World War II, and in the post-war period until it was superseded by 58 pattern webbing. The design was confirmed on 8 June 1938 and wide-scale issue began in 1939. Towards the end of World War II, some 37 Webbing was produced in jungle green for troops fighting in the Pacific Theatre, although purpose-made 44 Pattern Webbing was then introduced for the humid jungle conditions, being lighter in weight, quicker drying, and rot-proofed.[ Although 44 Pattern continued in use with the British Army for jungle warfare in its various post-World War II colonial conflicts, it did not replace 37 Pattern in general service, which was in use up until the introduction of 58 Pattern. However, 37 Pattern was used for ceremonial purposes and still issued to Cadets in the 1990s. 1937 Pattern Webbing was made from cotton webbing, which was waterproofed and dyed before being woven. The fittings were made of stamped brass and it was produced by various manufacturers.Written in black ink on the inside "Bretterecker" and the number 360053, possibly a post World War 2 service number.webbing belt, dress webbing

Pocket book size with mid brown linen cover imprinted with red lettering. Example of the New Testament that was issued to service personnel. The inside front cover has a message written by Lord Roberts dated 25th August, 1914. Book published by the Scripture Gift Mission and Naval and Military Bible Society, 15 Strand, London, W.C. The front cover has a red border and has the following inscription in red print, "ACTIVE SERVICE" TESTAMENT 1914. The spine is imprinted and has SGM symbol.world war 1, ww1, 1914-1919

Standard WW2 era Australian Army issue, pattern 1937 equipment pack made of heavy weight cotton webbing material in the standard khaki colour. This pack was carried on the wearer's back, supported by two straps worn over the shoulder. These packs were used by military personnel to carry personal equipment items whilst in the field. This pack type is square in shape and has additional straps for attaching to webbing. The front of the pack has 'NX 83432 G Siddaway' written in black. The top flap of the pack is secured by two straps which attach to brass buckles secured by canvas loops to the front of the pack.This pack is stamped with the standard Australian Dept of Defence mark and has the serviceman's name "NX 83432 G. Sidaway"

provenance unknownSmall, soft cover, pocketbook presumably souvenired from a German soldier during the latter stages of World War 2. The pocketbook is of the type originally issued by the German military and was printed in August 1941, edited by Georg Westermann, Braunschweig. The book has a red coloured cover with black printing and contains 48 pages. Pages are printed in black, the maps are printed in colour. The pocketbook is in good condition, some pages have tears and the cover is scuffed. The pocket book title translates as "Paperback Greater Germany, History Chart, Germany's Wehrmacht, World Atlas" and is a collection of information about the German Reich, German military units and insignia and world maps, 1942 calendar, etc. The original owner has made markings on some maps and has made notes.The front cover is printed in black ink with the following "Taschenbuch Groß-Deutschland, Geschichtstafel, Deutschlands Wehrmacht, Weltatlas"

A portable, three legged stand in the form of a tripod, used by Australian and British Commonwealth military forces for mounting the standard issue signaling lamp and heliograph. The three collapsible, metal tipped, wooden legs are joined by hinge fittings to a brass collar with a threaded mount at one end (the head). The mounting thread is approximately 38mm diameter and fitted with a protective cap which can be removed for use, the cap being retained by a length of light chain. The stand is complete with a leather and webbing carrying strap attached to the head fitting of the stand with a leather sleeve at the other end which fits over the free end of the legs when folded.The brass collar and mount is stamped : "STAND LAMP OR HELIO A MKlll" and has the manufacturer "PUDDEFOOT, BOWERS & SIMONETT LTD, LONDON, 1940". Serial number 47064. Each of the wooden legs are stamped with the Australian Department of Defence "DɅD" symbol.military, tripod, ww2, world war 2, signalling, heliograph, stand

Collection of documents and other service related items issued to VX117810 Frederick Charles Perry by the Australian Military Forces. F C Perry served as a Driver and was with the 2/47th Australian Transport Platoon at the time of discharge. Perry enlisted in the Citizen Military Forces from the 5th November, 1941 to the 10 August, 1942 and then transferred to the Australian Military Forces from 11th August, 1942 to the 3rd April, 1946.