Equipment issued to all Army Soldiers as part of original kit. Kit belong to CAPTAIN Brian CLEREHAN VX91862. Enlisted 29 March 1943 age 26 years, discharged 17 July 1946 with the rank of Captain in 2nd New Guinea Infantry Battalion..1) One litre water bottle with cork lid, insulating felt cover. Cork attaches by string to the felt cover. And also in a cotton webbing carrier. Made up of vertical and horizontal straps wth a brass studs, 2 brass buckles to attach to shoulder straps .2) One litre blue enamelled bottle with attached cork lid and insulating felt cover. No webbing included .infantry, water bottle, 2nd new guinea infantry battalion

This copper and tin container was used for the storage and transport of cordite that replaced black powder in 1889 as a military propellant. The stamped of a government broad arrow and date 1903 show the item was made for the war department and not for commercial use. The container once empty of explosives was used for many years as a flour bin on board the crayfish ketch "Lady Brassey" by Mr Charlie Washbourne, Crib Point, Australia (on the Mornington Peninsula in Victoria). The ketch Lady Brassey was probably named after Anna or "Annie" Brassey (née Allnutt), Baroness Brassey (7 October 1839 – 14 September 1887) who was an English traveller and writer. Her bestselling book A Voyage in the Sunbeam, Our Home on the Ocean for Eleven Months (1878) describes a voyage around the world including a visit to Australia.The explosives container is an example of how explosive compounds were stored and transported at the turn of the 20th century. It is significate as it is in very good condition and an artefact from Australia's colonial history around the Federation, just as the country was gaining independence from Britain.Metal box with tin sides, copper top and base and round, double layered lid that has a folding, D shaped handle. Referred to as a cordite container or copper drum. Inscriptions are stamped onto the drum and are on a sticker under the lid.Handle stamped "S & Co. 1900" on lid. Base is stamped "R.G.D. 1903" (meaning the container seals are resistant to Rapid Gas Decompression (RGD)") Logo: triangular "(vertical arrow) / A T " between letters and date. Base also has blue plastic label "N.T. 55" Sticker: "B55". flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, copper container, gunpowder container, government issue container, r.g.d. 1903, lady brassey, charlie washbourne, crib point, baroness brassey, cordite container, copper drum, gun powder container, gun powder, black powder, black powder container, explosives storage, crayfish ketch

This postcard is part of an album of postcards which date from late 19th century to mid 20th century.This postcard is in an album of postcards dating from the late 19th century to mid 20th century and, as such, indicate the popularity of collecting postcards in Australia which reached a height in the early 1900s until around 1920.This postcard depicts a man and a woman leaning together for a kiss. It is a print of the painting 'Undue Haste' by Harrison Fisher.On front, under image: 'UNDUE HASTE' On front, bottom right corner: '© REINTHAL & NEWMAN, PUBS., N.Y.' On back, left vertical: 'No. 193 / Entered Stationers Hall, London' On back, left top: 'THIS SPACE MAY BE USED FOR CORRESPONDENCE' On back, right corner: 'STAMP HERE / PRINTED IN AMERICA' postcard, 1900s, "green postcard album"

The steam engine indicator, or dynamometer, is an instrument used on a steam engine (such as that of a vessel or train) to measure and record the change in the pressures of the engine’s cylinders during their operating cycle. The engineer would use it to identify problems or defects such as bad valve settings or constricted steam pipes. It could indicate the difference in efficiency caused by adjustments made to the engine, being able to instantly measure the variation of pressure from the engine stroke at any given time. This force of power would be registered by a pencil, fitted to the adjustable arm, which would trace a line on paper wound around the cylinder. The recorded information could be used in conjunction with mathematical tables. This particular instrument was made by T.S. Mc Innes, one of the better manufacturers of engine indicators. Mc Innes engine indicators were still being used in the mid 1900’s. This specific instrument was used by Mark Forsythe of North Berwial, Scotland and late of Ararat, Victoria when he was chief engineer on the “SS Talawena” in 1892. The Port of Warrnambool, in Victoria, harboured steam ships that carried both passengers and cargo along the south west coast in the late 1800’s and into the 1900’s. The engineer of a steam ship was responsible for reaching and maintaining the optimum level of steam energy to serve the locomotion and efficiency of the steam ship. The engineer would use a steam engine indicator to measure and record information to achieve this purpose. Engine Dynamometer or Steam Engine Indicator in square, fitted oak case. This brass instrument is used to measure and record steam pressure for setting up and adjusting valves on a steam engine. It has an oscillating recording drum with vertical, silver clip attached for holding paper in place around the drum. The drum oscillates left to right. There is a pulley attached to a length of cord, which is attached to the drum. Beside the drum is a fine metal arm, vertically adjustable, small hole in the end to hold a pencil. Inscription stamped into bracket of the arm. The engine indicator is mounted on a hinged side of the case that swings out ready for use. Attached chains prevent the side from opening past vertical. There is storage for other accessories and an empty compartment in the base (where a scale or ruler may have been located). The case has a collapsible wooden handle, brass hinges and two brass, hook-shaped catches. There is a code stamped inside the lid. It contains a brass, ‘T’ shaped steam-cock (or stop cock) with two open ends made of metal pipe with different sized threads. (Turning the handle on top opens and closes the space in the pipe and would close off the flow of steam from one end to the other.) Also inside the case are three different spiral springs, each with a threaded nut on the end that has a threaded hole inside it. Used by Mr Mark Forsythe when chief engineer on the SS Talawena in 1892 “T.S. MC INNES PATENT” and “522 _ _” (last 2 digits are unreadable) pressed into the arm of the brass indicator. “[ ] X ’ stamped inside the lid of the case. The 3 springs all have a number stamped into them: (1) “32” and “12” (2) “12” and “16” [above] “12” (3) “64” and “150” Card that came with instrument “This instrument was used by Mark Forsythe of North Berwial Scotland and late of Ararat, Victoria when chief engineer on the SS Talawena in 1892" dynamometer, steam engine indicator, t.s. mcinnes, glasgow, dobbie mcinnes, port of warrnambool, warrnambool, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, maritime museum, shipwreck coast, great ocean road

A hacksaw is a fine-toothed saw, originally and principally for cutting metal. They can also cut various other materials, such as plastic and wood; for example, plumbers and electricians often cut plastic pipe and plastic conduit with them. On hacksaws, as with most frame saws, the blade can be mounted with the teeth facing toward or away from the handle, resulting in cutting action on either the push or pull stroke. In normal use, cutting vertically downwards with work held in a bench vice, hacksaw blades should be set to be facing forwards. A steel hacksaw with a wooden handle but without blade

This receipt was donated with our collection's Wertheim sewing machine accessory box. The box contains twelve accessories, the instruction book and the receipt for the purchase of a Wertheim sewing machine. The receipt was written on July 23rd 1891 by the Wertheim distributor in Melbourne, Hugo Wertheim. His business was the Wertheim Sewing Machine and Hapsburg Piano Depot, trading at 173 Williams Street, Melbourne. The purchaser was Mrs Burrowes from Burrumbeet, Victoria, a district northwest of Ballarat. She paid £6-6 (six pounds and six shillings) in cash. The receipt was signed by H. Wertheim and the other signatory looks like John A. Cherry. Hugo Wertheim (1854-1919) was an agent for his father’s cousin Joseph Wertheim, a well-established sewing machine manufacturer in Germany. He was born in Lispenhausen, Germany, and migrated to Melbourne in October 1875, where he opened a merchandising business at 39 Flinders Lane East. He returned to Germany in 1885 to marry Joseph Wertheim's daughter Sophie Emilie. The couple came back to Melbourne, and Hugo quickly established a substantial business selling sewing machines, bicycles, pianos and other mechanical devices, under brands such as Wertheim, Electra, Planet, Griffin and Hapsburg. He exhibited at agricultural shows and in 1901 at the Pan American Exposition, Buffalo, United States of America. One of his staff was O. C. Beale, who later set up his own piano business in New South Wales. Hugo continued to own 25 per cent of one of Beale's companies, which became Wertheim's Queensland business. In 1908 Hugo Wertheim opened a piano factory in Richmond, Melbourne, aiming to produce 2000 pianos and player pianos a year, predominantly using Australian materials. In laying the foundation stone, Prime Minister Alfred Deakin observed that “few men with such opportunities for a life of ease would have embarked on such an enterprise” Hugo died of chronic hepatitis in 1919 at his home in South Yarra. His eldest son, Herbert Joseph (1886-1972), continued the business. The piano factory closed in 1935, becoming a Heinz food processing plant and in 1955, GTV Channel 9 studios and offices. The Wertheim Sewing Machine Company – Joseph Wertheim (1804–1899) founded the company in 1868 in Frankfurt, Germany. At this time Joseph was the Frankfurt city delegate for the Democratic Party. At its height, the Wertheim factory employed approximately 650 workers. The company used a trademark of a dwarf holding a hammer which is known to have been used until at least 1925, however in 1909 a Star of David was also registered. In 1870 a Wertheim subsidiary was formed in Barcelona, Spain. The business imported and sold complete machines, including the English Jones machine. Locals began calling the sewing machines “las rapidas”, and the business became known as “las casa de las rapidas”. In 1915 production began of a totally manufactured Spanish Wertheim machine. Wertheim in Germany continued manufacturing machines until 1932 when the Wertheim family fled to Spain. Despite converting to Christianity from Judaism, they feared the political unrest in Germany during that time. Wertheim Spain became Rapida SA and was then the sole manufacturer of the Wertheim machines. The factory was managed by Karl Wertheim under the alias Carlos Vallin.The receipt is significant for its connection with Victoria's northwestern district, the Melbourne distributor Hugo Wertheim, and the well-known German manufacturer of the early domestic sewing machines, Joseph Wertheim. The stamp with Queen Victoria's profile also connects the receipt to the Victorian era and connects Melbourne to Colonial Australia. The receipt also gives a fixed date to the machine accessories and instruction book in our Collection, connecting them all to domestic life in the Victorian era.Receipt on cream paper, rectangular, with red horizontal and vertical lines. Printed letterhead and heading text. Handwritten details of the seller, owner, the item purchased, method of payment, and cost. Signed by two signatories. A one-penny stamp is attached. Sold by Wertheim Sewing Machines and Hapsburg Pianos,.dated 23rd July 1891 for £6 6/- from Mrs Burrowes, Burrumbeet, Victoria, for the purchase of a Wertheim sewing machine.Printed "From the Wertheim Sewing Machine and Hapsburg Piano Depot" Handwritten "Mrs Burrowes, Burrumbeet" "July 23rd 1891" "Wertheim Sewing Machine" "£6 6" "Settled by Cash" Signatures "H. Wertheim" and (Looks Like) "John A Cherry" Ont the stamp, [image of Queen Victoria's profile] and "VICTORIA" "ONE PENNY" flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, wertheim, sewing machine, victorian era, sewing machine accessories, sewing machine instructions, wertheim sewing machine and hapsburg piano depot, 23-7-1891, £6 6/-, mrs burrowes, burrumbeet, h. wertheim, wertheim sewing machines, domestic machines, dress making, home industry, fashion, receipt, queen victoria stamp, one-penny stamp

Hat badge issued by Royal Corp Australian Army Ordnance. Queens crown at top of garter with motto "Honi Soit Qui Mal Y Pense". Ribbon at bottom with corp name in metallic gold. Shield shaped crest in garter shows 3 cannon balls in a row at top with 3 cannon displayed vertically beneath, in silver coloured metal. 2 pins mounted on back with clasps.badge, hat, australian army, royal corp of ordnance

Pre egg cartons.Home-made with reused 'crate' wooden panels. Higginson and Hollond families - farmers in the Kiewa Valley. Bogong was a property owned by Kiewa Valley farmers. Dave Gibson worked with the SEC in the early days and married Lois Hollond (Robert and Reg's sister). Lois lives in WodongaOld brown wooden handmade box with two panels joined together on each face (sides, bottom, top). The lid fits inside at the top and has 3 smaller panels nailed on, 2 of which have leather straps nailed on one side of the box and fastened (nailed) to 1 side as a hinge. Inside: the box has 2 wooden vertical panels dividing the box into 3 sectionsTop of the lid in yellow paint "Mr D. Gibson/Bogong" on 1 wooden panel and "Eggs with Care" on smaller panel between the side panelseggs, farming. chooks, kiewa valley, higginson family, hollond family

Could this flag have flown at the 1956 Olympics on Lake Wendouree ??? Probably not because the current tricolour came into use in 1946. The flag would have been made during the reign of King Victor Emmanual III. If you are able to assist with any information on this flag, including why it would be held in a Ballarat collection, please email is via the link on the lower right . The State flag, and state and naval ensign. It is a vertical tricolour of green, white, and red, defaced with the arms of Savoy and crown. This was the first national flag after the unification of Italy. Proportion 2:3 Adopted 1861 (proclamation of the Kingdom of Italy) Relinquished 1946 (birth of the Italian Republic) The flag without the crown woul the the design adopted by the Kingdom of Piedmont-Sardinia in 1848 The flag has been stitched in 5 places. Stamped in ink on edge 'November [1930] Torino" A note with the flag states: "Old Italian Flag - (Before independence in 1946) his flag was made in 1930 in Torino- Italy? This flag Shows the royal insignia displayed in the white area and was designed around the time of Napoleon (by him) in 1840s Red "Flags" book V D'Angri"flag, italy, italian flag, italian army flag, turin, torino, house of savoy, savoia, crown

The man on the right is Thomas Tuckerman. His cousin is on the left.The photo is in a frame of different layout. Frame: Metal frame with decorative edges. At the top is a Rising Sun Army Badge. The badge is marked "Australian Commonwealth Military Forces" It has a vertical perspective. Photo: Black and White photo of the two men seated. One is holding a book, probably a marriage register. There is a small table between them. Their clothing appears to be 1910-1930 vintage, neither have a R.A.S. badge on. On the right side is printed the photographer's name: R. Dermer Smith, Bull Street, Bendigo photo, wedding party

Historically this item was before electricity lighting was available. There is no protection around the candle to prevent wind or air movement from extinguishing the candle flame therefore this means of night illumination was used within a house environment. It could be easily moved from room to room but would have insignificant "candle power" to lighten more than a few metres around it. This item was before kerosene lamps, gas lighting and electric/battery lamps This candle holder would have been used within the homes of Kiewa residences to illuminate the way from room to room where there were no other forms of lighting available. As it is relatively light in weight and with a finger/s grip it is highly portable and was in time replaced by battery powered torches. It was used in a period where home, or local made candles were a necessity of living. This Item was used before battery powered torches were invented. Although candles are still used in the late 20th and after, their fundamental use has changed and they function more as a mood enhancement item or as a back up for an electrical power failure and the alternative battery powered torch also runs out of power.1. This small basin shaped candle holder is formed of metal and sealed with a pale grey enamel skin. It has a black painted edge and finger holder. It has a raised vertical spout for the securing of the candle. The bottom of the basin is contoured from the candle base to the outer edge to allow for melted candle wax to be safely held within the basin. 2. As above. The handle is rusty but otherwise in good condition. candle-holder, portable light enamel household goods

Pipe smoking has been in vogue for centuries, and in Australia it was a symbol of the "discerning smoker" such as the landed gentry or men of professional status. This pipe, of the cherrywood style, would have suited the young professional of the mid and late 1900s. It is the type of pipe well suited to the rural backdrop. In the late 1900s, with the health related restrictions placed on public smoking these tobacco pipes were not immune from the legislation, and even though the pipe smoke was not as offensive as cigarette smoke it still came under the umbrella of smoking. Pipes were also used in the process of inhaling illicit drugs i.e. marijuana, but this use was limited to a very few. Smoking in the second millennium is being phased out as a social habit in Australia but may affect the few "private" smoker and has, as the United States prohibition era (alcoholic drinks) did, spawnThis type of pipe lends itself well to the rural setting of the Kiewa Valley and although it is a bit more bulky in shape its wooden barrel blends into the environment. The Kiewa Valley region was up until the late 1900s part of the Australian Tobacco Industry and the levels of men smoking pipes was enhanced by the ready supply, "off the fields" of tobacco leaves. It was used in a time when a good pipe was a precursor for a good relaxation activity. This method of smoking required at least one hand free to hold the pipe (especially the heavier ones) and therefore was used more by the "landed gentry, squire or academic) than by the labourer.This pipe (a ROPP brand) has a full bent vertical stem and its style is cherrywood. The pipe has a permanent filter and a orange coloured band at the stem /shank connection. The stem screws into the bowl and the shank 110mm is made from cherrywood (dark brown in colour). The bit (mouth piece) is 40mm long and in an 80 degree curviture. It has red and green coloured leather ties at the mortise/tenon location.tobacco, pipe smoking, smoking accessories

This Legacy donor's badge is one of a set of badges collected by Dr W R Angus from the organisations in which he was involved. The badge was made by A.J. Parkes, an Australia-wide firm that has been making badges for over a century. The $10', embossed on the back dates the badge after February 1966, when Australian money changed to decimal currency. A donation of $10 would be recognised by the gift of this badge. The set of badges is now part of Flagstaff Hill’s comprehensive W.R. Angus Collection, donated by the family of Dr W R Angus, surgeon and oculist. The W.R. Angus Collection: - The W.R. Angus Collection includes historical medical equipment, surgical instruments and material belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) and Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. It includes historical medical and surgical equipment and instruments from the doctors Edward and Thomas Ryan of Nhill, Victoria. Dr Angus married Gladys in 1927 at Ballarat, the nearest big city to Nhill where he began as a Medical Assistant. He was also Acting House surgeon at the Nhill hospital where their two daughters were born. During World War II He served as a Military Doctor in the Australian Defence Forces. Dr Angus and his family moved to Warrnambool in 1939, where Dr Angus operated his own medical practice. He later added the part-time Port Medical Officer responsibility and was the last person appointed to that position. Both Dr Angus and his wife were very involved in the local community, including the planning stages of the new Flagstaff Hill and the layout of the gardens there. Dr Angus passed away in March 1970.This badge is significant for connecting Doctor Angus with organisations that he supported. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The Collection includes historical medical objects that date back to the late 1800s.Legacy appeal badge; a rectangular, shield-shaped metal and enamel badge, blue enamel on gold, with the Legacy symbol of a flaming torch in the centre. It has a vertical stick pin and inscriptions on the back. Made by A.J. Parks, Australia. The badge was given to donors of $10. This badge is part of a set of badges collected by Dr W R Angus. the set represents organisations that he was involved in, and is part of the W.R. Angus Collection.Embossed:“$10”and “A.J. PARKES” “AUST. WIDE” flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, badge, legacy badge, organisation badge, a.j. parkes, $10, ten dollars, donor's badge, legacy appeal, w.r. angus collection

The badge represents the Victoria Division of the Australian Red Cross Society, which was formed on 21st August 1914 at the outbreak of the First World War. Stokes & Sons of Melbourne made the button. It was made by Stokes & Sons Pty. Ltd. in Melbourne. The maker, Thomas Stokes, migrated to Melbourne from Birmingham in 1854 and set up business in Mincer Lane as a die-sinker, producing medals, tokens, buttons and silverware, and offered an engraving service. He moved to Flinders Lane in 1856. After a time, in 1894, the business became Stokes & Sons Pty. Ltd, electroplates and badge makers at Post Office Place in Melbourne. The maker's mark 'Stokes & Sons' continued to be made on badges up until 1962. This badge is one of a set of badges collected by Dr W R Angus from the organisations in which he was involved. The set of badges is now part of Flagstaff Hill’s comprehensive W.R. Angus Collection, donated by the family of Dr W R Angus, surgeon and oculist. The W.R. Angus Collection: - The W.R. Angus Collection includes historical medical equipment, surgical instruments and material belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) and Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. It includes historical medical and surgical equipment and instruments from the doctors Edward and Thomas Ryan of Nhill, Victoria. Dr Angus married Gladys in 1927 at Ballarat, the nearest big city to Nhill where he began as a Medical Assistant. He was also Acting House surgeon at the Nhill hospital where their two daughters were born. During World War II He served as a Military Doctor in the Australian Defence Forces. Dr Angus and his family moved to Warrnambool in 1939, where Dr Angus operated his own medical practice. He later added the part-time Port Medical Officer responsibility and was the last person appointed to that position. Both Dr Angus and his wife were very involved in the local community, including the planning stages of the new Flagstaff Hill and the layout of the gardens there. Dr Angus passed away in March 1970.This badge is significant for connecting Doctor Angus with organisations that he supported. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The Collection includes historical medical objects that date back to the late 1800s.Badge; a round metal and enamel badge with a blue band around the perimeter and a silver-edged red cross on a white background in the centre. The badge has a vertical pin on the back. It is the badge of the Victorian Division of the Red Cross Society. the maker was Stokes & Sons of Melbourne. This badge is part of a set of badges collected by Dr W R Angus. the set represents organisations that he was involved in, and is part of the W.R. Angus Collection.Printed within the blue band; “RED CROSS SOCIETY” “VICTORIAN DIVISION” Embossed on the reverse; “STOKES & SONS / MELB” flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, w.r. angus, badge, organisation badge, flagstaff hill maritime museum and village, australian red cross, victorian division, charity, volunteer organisation, w.r. angus collection

Buff envelope addressed to Michael Kelly, Esq., Sharebroker, Bendigo, Victoria, Australia, post marked London, Sep 2, 1926 J. Envelope has an insignia in the top left corner. It has a shield with a cross, a sword makes up the vertical part of the cross. An eliptical shape wreath surrounds the shield. Envelope from The Rev. George L. Craven, 48, Compton Street, London, W.C. 1.business, stockbroker, kelly & allsop, kelly and allsop collection - envelope, michael kelly esq., the rev. george l craven

Two black and white photographs of a Scalebuoy Unit ready to be installed on the water supply. It is a long tubular shape with ends bolted onto it. At the top it has two vertical fittings with gate valves on each one. Above the gate valves are 2 T's and another gate valve in the centre. The name Scalebuoy is along the side of the barrel. Teal and white label on the back Reg. V. Brock of Bendigo and the photo number.sciences, instruments - general, scalebuoy, bill ashman collection - correspondence, scalebuoy unit

Sports Clubs in Kew in the final decades of the 19th century and in the early 20th century were often umbrella organisations with facilities for a number of sports. Typically in Kew, this included teams in lawn bowls, tennis and croquet. The Kew Bowling Club was formed in 1880 while the privately owned Auburn Heights Recreation Club was opened in 1904. By 1998, the two Clubs decided to amalgamate at the Auburn Heights site in Barkers Road, forming the Kew Heights Sports Club. The combined club was itself taken over by the Melbourne Cricket Club in 2012 becoming MCC Kew Sports Club. In 2017 MCC Kew closed and its landholding was subsequently sold to Carey Baptist Grammar School. Both the Kew and Auburn Heights Clubs assembled important collections. These historically significant and large collections were donated to the Society in 2020. The collections include manuscripts, pictures, trophies, plans, honour boards etc. The combined collections of the four sporting clubs making up the collection number hundreds of items that are historically significant locally. They are also significant to the sporting history of the greater Melbourne area and to the sports of lawn bowls and tennis in Australia in the 19th and 20th centuries. The collection illuminates two of the Victorian historic themes - 'Building community life' through forming community organisations and 'Shaping cultural and creative life' by participating in sport and recreation.Metal trophy on stand awarded to the Section 7 Eastern Region Tennis Runners-Up in 2011. The upper part of the small trophy includes a circular enamel disc featuring tennis racquets surrounded by a sunburst. The disc is held within a vertical laurel wreath. The lower section of the trophy is a plastic and metal cube standing on a flat plinth. Information about the award is attached to the cube in front and rear plaques.Front Plaque: EASTERN REGION TENNIS / RUNNERS-UP Rear Plaque: SECTION 7 2011 / JAMES DALBOSCO, DARCY O'SHANASSY, LOUGHLIN O'KANE, DOMINIC WEBER, BEN SCALAkew heights sports club - 397 barkers road - kew (vic), kew heights tennis club - competition trophies

Contextual or historic information One of a series of photographs, taken by Edgar James Dower in the second decade of the twentieth century. Born and raised in Olinda, his family later moved to Surrey Hills. He worked as an adult as a clerk in the city office of the Metropolitan Gas Company, and in his role as a 'collector', he was able to photograph scenes including the construction of tramlines and associated buildings in Kew, Hawthorn, Camberwell and Surrey Hills. Later he established a real estate agency with his brother - the E.J. Dower Real Estate Agency, Dandenong Office.The image is an historically significant record of the development of transport infrastructure which was used to connect Victorians in the first two decades of the twentieth century. This development resulted from increases in population and the consequent extension of Melbourne's suburbs. The photographs, both individually and collectively, richly detail the labour of workers and the tools and machinery used to create and extend Melbourne's tram network in the years preceding and during World War 1.Two faded original horizontal photographs, mounted on vertical card showing the original railway level crossing in Glenferrie Road, Hawthorn, before a railway overpass was constructed and the laying of the electric tramline. The two photos depict northern and southern views of the crossing. Dimensions: Photo 1 106 x 157 mm Photo 2 107 x 147 mm Mount 249 x 197 mmAnnotated recto: "Showing tramway gates at Glenferrie, taken 1912 by E.J. Dower, just prior to construction of electric tramline." Verso: "1912"theme --- travelling by tram, theme -- connecting victorians by transport and communications, trams -- boroondara (vic.), tramways -- hawthorn, trains -- hawthorn (vic.), glenferrie station

Abstract depiction of a bird in trees. Trees are picked out in strong vertical strokes of white, grey, black and russet. Background and foliage is depicted in swirling blues and greens; the sky is grey at top of image. At top centre is a bird in blue and white. The paper is very think - almost like tissue paper and there are parts of the image that have cutouts (tearouts) as part of the depiction. Mounted in a cream matt in aluminium frame.Front: Monoprint and montage (lower left) (pencil). Back: Nancy Malseed (top centre) (pencil). 1990 (top right) (pencil) 1996 (top left) (pencil).abstract, female artist, female artists, women, malseed

.1) A scarlet woollen jacket with blue collar. It has blue cuffs. On the collars are badges of the RAASC. On the epaulettes are a Captain's set of pips (3). .2) Vest. Blue woollen outer, polyester inner. Two small pockets on front with four small buttons. .3) Shirt, cream/white colour. 7 pearl buttons. It has lighter vertical stripes every 20mm. .4) Bow Tie - black,.1) Written in jacket is: “392063 Butterworth” .2) Written in the vest is: “392063 Butterworth” and .........”Jardine 11119”post ww2, officers mess dress, passchendaele barracks trust

Christmas Card - with a number of wrapped gifts and decorations around a pot belly stove on the front cover, a Christmas and happy new year message on the inside and a colour photograph of BTM tram No. 18 at the Gardens Loop with Graham Jordan and Warren Doubleday "testing the suspension" on 12/12/1982. Card sent by Earl Ewers, alias the "Canberra Kid". Card printed on heavy paper and folded in the middle vertically.Under photograph in blue ink "Messrs Jordan and Doubleday testing the suspension on No. 18 at Gardens Loop 12/12/1982!" and in message "To all the BTPS Ltd. members and workers from ye olde "Canberra Kidd"!"tramways, trams, christmas cards, gardens loop, btps

Silver War Badge (WW1) No. A.35027 belonging to "Herbert Charles Nott" No. 228. See also Cat No.S 7816.4 for H.C. Nott's service record. Part of the Cooper Collection.1. Circular metal badge with the words "For King and Empire" and "Services Rendered" around the rim. Voided cypher and Kings Crown (George V) in the centre. Reverse has a hinged vertical pin. Badge contained in dark grey coloured cardboard box. 2. Base of grey coloured box. Number of badge on white paper attached. Square in shape. 3. Lid of grey coloured box. Square in shape.1. Engraved on reverse side of badge 'A.35027'. 2. Printed in black ink on white paper on base: 'A35027'.herbert charles nott, cooper collection, badge, services rendered, ww1

The Stanley Works was founded by Frederick Trent Stanley in 1843 located in New Britain, Connecticut USA. The Stanley Rule and Level Company was founded by Frederick's cousin Henry Stanley in 1857. Stanley introduced the first steel tape, Stanley introduced utility knives in 1936. Stanely buildt the largest hand tool plant in the world in New Britain, CT (Connecticut). In 1920, the Rule and Level Co. merged with the Stanley Works, which in turn merged with Black and Decker in 2010.Owned by Kiewa valley resident, Lankey Higginson.Solid wooden plank with brass attached by screws. brass plates at each end, around the level 'window' and further along. Also with a 'badge'. This latter one is beside a ound hollow which has a level window to measure the vertical side. The horizontal level measure is in the centre on the narrower ledge of wood. On the centre wider edges is a groove to assist in hold in the spirit level steady. Above the glass levelAbove the glass level, inscribed on a brass plate is "Stanley / Rule and Level Co. / New Britain Conn. U.S.A. / Pat. 6 -2-91 and 6 -28 -96" Also, 2 small brass plaques / badges inscribed: "ADJ pat. Feb. 1890 / screw."stanley rule and level co., spirit level, higginson family

This 10” (ten inch) spirit level was made from boxwood by Barringtons of London. It was used in the making of ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This spirit level is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This spirit level was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Wooden spirit level. Barringtons Spirit level No 650, Warranted boxwood. Made in London. Length 10" (10 inches). Bottom corners are reinforced with metal protection. It has two levels. The vertical level is within a round cut-out in one end. The horizontal level is on the top edge, surrounded by a metal plate with two cut-outs. One side of the spirit level has a ruler marked at 1/16 inch intervals, the other side is marked at 1/8 inch intervals. There is a large circle cut-out in the end that holds the vertical level. Both sides have the manufacturer’s name, the level’s model number and the material it is made of. One side also has the city of manufacture – England. This spirit level is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. 2x “WARRANTED BOXWOOD”, 2x “BARRINGTON’S No 650”, “LONDON”flagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, barringtons spirit level, barringtons london, 10” spirit level, sovereign of the sea, ship model, hobby, ship model tool, english war ship, measuring instrument

This sign was displayed at the 1st International Domiciliary Nursing Congress which was hosted by the Royal District Nursing Service (RDNS).The 1st International Domiciliary Nursing Congress was hosted by Royal District Nursing Service (RDNS). Mrs. D.(Elsa) Hallenstein, President of RDNS, presided over the opening ceremony with the Prime Minister of Australia, the Hon John Gorton opening the Congress. It was held in Melbourne and ran from the 1st to the 8th of February 1970. Many delegates came from around Australia and overseas; from the World Health Organisation; from the North American continent; from Europe, from Asia and from the Pacific. Black and white photograph showing the sign displayed at the 1st International Domiciliary Nursing Congress. Across the photograph is a long black metal stand, with eight legs, which holds a large board. On the upper quarter can be seen to the left a medium sized black circle which has the lettering '1st' outlined in white on it. To the right of this is the black lettering "International Domiciliary Nursing Congress" in capital letters on a white background. Below the black circle, on a white background, is a large round white globe outlined in black and with black spaced vertical and horizontal grids on it. In the lower centre of this is the black coloured land mass of Australia. Over the left hand top section, and above and to each side of the white globe are different land masses of the world displayed in grey. To the right of this there are two grey sections which are divided vertically with a black line,.and contain information on white sheets. To the right of that is a white section with round photographs in three pairs running down the board.Photographer stamp. Quote No. JE 4royal district nursing service, rdns, mrs d. (elsa) hallenstein, hon john gorton, 1st international domiciliary nursing congress

MIL-A-25892C(USAF) H.I.Garment Co. DSA 100-1734 U.S Large Regular Stature 67.07-71.24 Weight 191-220 S/N 8475-559-5347 Marking of W/C Knudsen inscribed on label.

A Neil Robinson stretcher is a lightweight carrying device modelled on Japanese bamboo litters, the Neil Robertson rescue stretcher was developed in the early 1900s by John Neil Robertson. Used for lifting an injured person vertically. The stretcher is made from stout canvas reinforced with bamboo slats. The stretcher is designed for removing an injured person from spaces wherein access, doors or hatches are too small to permit the use of regular stretchers. Spaces such as ship engine room spaces, cargo holds, pump rooms, boiler rooms etc. are a few examples of such compact spaces.An item designed to transport injured personnel from tight places, either at sea or on land.A rescue stretcher made from white canvas reinforced with bamboo slats and adjustable canvas straps. The canvas straps are secured with metal buckles and there is a metal ring attached to lengths of ropes at both ends. Noneflagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, stretcher, neil robertson, neil robertson rescue stretcher, rescue equipment

A large fabric flag of the Legacy logo. It would be used on many occasions to identify and promote Legacy. It has been stuck to a vertical surface using blutac as it is stained and there are remains of blutac on the fabric. The symbol of Legacy is the Torch and Wreath of Laurel. The Torch signifies the undying flame of service and sacrifice of those who gave their lives for their country. The Wreath of Laurel is the symbol of our remembrance of them. The flag was used in many events up to at least the late 1990s to promote Legacy. A similar flag is attached to a flagpole in the President's office. Maker was Evans Flags.A record of the former colour scheme used by Legacy.Commercially made Legacy Flag. Legacy symbol appliqued onto yellow background with blu tac stains. Flag rings attached.legacy promotion, logos