The Ballarat Save TAFE campaign ran from 2012 to 2014. It was a Trades Hall and community campaign in partnership with the Australian Education Union and National Tertiary Education Union. The campaign was in response to significant financial cuts and closure of many TAFE courses by the Baillieu/Napthine governments. Availability of TAFE in Ballarat is particularly important in training future tradespersons and future provision of many services. Campaign President: Athan McCaw Campaign Vice-President: Brigid O'Carroll Walsh Campaign Secretary and Treasurer: Brett Edgington During the campaign, Premier Ted Baillieu visited Ballarat on several occasions only to be met by angry groups of citizens who were opposed to his government's decimation of Victorian TAFE. The picture shows one of the early rallies convened by the Ballarat Save TAFE Group and features union and community members who protested. As above (see historical information).jpeg filebtlc, ballarat trades and labour council, ballarat trades hall, tafe, union campaigns, baillieu, edward (ted), napthine, denis, education and training, nteu - national tertiary education union, aeu - australian education union, federation university, smb campus (formerly known as school of mines ballarat) - federation university

The Ballarat Save TAFE campaign ran from 2012 to 2014. It was a Trades Hall and community campaign in partnership with the Australian Education Union and National Tertiary Education Union. The campaign was in response to significant financial cuts and closure of many TAFE courses by the Baillieu/Napthine governments. Availability of TAFE in Ballarat is particularly important in training future tradespersons and future provision of many services. Campaign President: Athan McCaw Campaign Vice-President: Brigid O'Carroll Walsh Campaign Secretary and Treasurer: Brett Edgington During the campaign, Premier Ted Baillieu visited Ballarat on several occasions only to be met by angry groups of citizens who were opposed to his government's decimation of Victorian TAFE. The picture shows one of the early rallies convened by the Ballarat Save TAFE Group and features union and community members who protested. As above (see historical information).jpeg filebtlc, ballarat trades and labour council, ballarat trades hall, tafe, union campaigns, baillieu, edward (ted), napthine, denis, education and training, nteu - national tertiary education union, aeu - australian education union, federation university, smb campus (formerly known as school of mines ballarat) - federation university

The Ballarat Save TAFE campaign ran from 2012 to 2014. It was a Trades Hall and community campaign in partnership with the Australian Education Union and National Tertiary Education Union. The campaign was in response to significant financial cuts and closure of many TAFE courses by the Baillieu/Napthine governments. Availability of TAFE in Ballarat is particularly important in training future tradespersons and future provision of many services. Campaign President: Athan McCaw Campaign Vice-President: Brigid O'Carroll Walsh Campaign Secretary and Treasurer: Brett Edgington During the campaign, Premier Ted Baillieu visited Ballarat on several occasions only to be met by angry groups of citizens who were opposed to his government's decimation of Victorian TAFE. The picture shows one of the early rallies convened by the Ballarat Save TAFE Group and features union and community members who protested. As above (see historical information).jpeg filebtlc, ballarat trades and labour council, ballarat trades hall, tafe, union campaigns, baillieu, edward (ted), napthine, denis, education and training, nteu - national tertiary education union, aeu - australian education union, federation university, smb campus (formerly known as school of mines ballarat) - federation university

The Ballarat Save TAFE campaign ran from 2012 to 2014. It was a Trades Hall and community campaign in partnership with the Australian Education Union and National Tertiary Education Union. The campaign was in response to significant financial cuts and closure of many courses by the Baillieu/Napthine governments. Availability of TAFE in Ballarat is particularly important in training future tradespersons and future provision of many services. Campaign President: Athan McCaw Campaign Vice-President: Brigid O'Carroll Walsh Campaign Secretary and Treasurer: Brett Edgington During the campaign, Premier Ted Baillieu visited Ballarat on several occasions only to be met by angry groups of citizens who were opposed to his government's decimation of Victorian TAFE. The picture shows one of the early rallies convened by the Ballarat Save TAFE Group in Lydiard Street, television reporters and a very noisy large group of protesters. As above (see historical information).jpeg filebtlc, ballarat trades and labour council, ballarat trades hall, tafe, union campaigns, baillieu, edward (ted), napthine, denis, education and training, nteu - national tertiary education union, aeu - australian education union

Part of the Uebergang Collection. Made by the firm of Triaca & Picchi. Camilo Triaca (1887-1972) was a sculptor born Tuscany, Italy. He arrived in Melbourne in 1909 and practised his craft in Richmond, Melbourne, before returning to Italy in 1914 to serve in the Italian Army. He returned to Melbourne in 1923 and continued to sculpt at his Richmond home before relocating to Fitzroy. A 1927 image of workers at his studio workshop taking a lunch break is in the Italian Historical Society collection (http://trove.nla.au/version172106091). The workshop was situated at 76-78 King William St, Fitzroy.Plaster figurine depicting a boat with a girl sitting in the front holding the rope of an anchor and a boy holding the back of the boat which is up on the sand. The girl wears a short sleeved frock with green edged neck and sleeves, and a matching scarf. The boy wears a V-neck shirt with sleeves rolled up.Triaci & Picchi/1773triaca camilo, triaca & picchi, italian immigrants, families, businesses, trades, sculptures, sculptors, melbourne, allansford, uebergang

The Ballarat Junior Technical School was a division of the Ballarat School of Mines.Twelve carboardd posters relating to the resumption of classes for 1912 at the Ballarat School of Mines. ballarat school of mines, sloyd, manual training, trades, blacksmithing, dressmaking, turning and fitting, fitting and turning, plumbing, engineering drawing, ballarat junior technical school

Blue hard covered book with green tape, including some receipts for students. The instructor was Ross Morgan.ballarat school of mines, trades, joinery, r. morgan, receipts, donald rodger, stephen elford, darren jenkin, ronald matthews, bernard ryan, rodney matthews

Blue hard covered book with red tape. Instructor was John Tobin. Iballarat school of mines, trades, carpentry, john tobin, allan page, sebastian steenhuis, geoff white, anthony lindkvist, anthony lockett, tony lockett, dvid penington

This item wasused before diesel, electric and battery drilling apparatus were used by farmers, and other trades requiring a portable yet reliable method of drilling holes. As this item is a 3/4 inch hole drill it would be suitable for fencing and providing holes for structural studs. As with all outdoor farm equipment, man power was required (be it the farmer or farm hands). Fitness of the operator was at a high standard but protective gloves were not highly thought of as it was before occupational, health and safety regulations became mandatory over all manual handling activities, be they on rural properties or town/city factories. This period was one where the male ego was at its pinnacle i.e. the harder the tasks the more of a man was required. Hard manual work was not only the "way to go" but also a necessity. Evolution of cheap portable electric/battery powered tools opened up a more efficient method available, especially to those with less muscle strength. This item personifies the rugged environment of the rural workplace. The Kiewa Valley with its main emphasis on farming and grazing provided ample opportunity to use this construction implement. The manufacturer being a Scottish tool company is very significant in the era when this hole maker was in high demand. British steel products were of high grade and had a good record of reliability. The reliability of any tool was a solid factor for farmers and tradesmen in this semi-isolated region (Circa early 1900s) within the Kiewa Valley and its regional area. This factor,although not as crucial, post 1960s, when Asian manufacturers entered the market place and produced cheaper tools and transportation and supplies was more frequent and reliable, the need for the more expensive British made tools diminished considerably. After the influx of tradesmen from war torn Europe (post 1945) and the increased availability of tradesmen in the Kiewa Valley and its region the price of tools was and still is not as crucial and the cost of all required tools has become a minimal part of the equation. It is only with the emerging younger trades person, farmer and grazier, who have more, "one eye on production costs" and no "old ties to the motherland" inert mind set that quality tools such as this auger and other hand tools "must be made to last a life time" is no longer part of the modern work environment.This cast iron, hand operated Auger has a short barrel shaped cylinder at one end (known as the "Eye") and at the other end a Helical screw blade (screws the cutting edge into wooden material, thereby creating a hole 3/4 inch diameter in the wood) . The barrel section at the top permits a metal or wooden leverage plank to be inserted. The main rod has a 180mm long cutting/screw blade running from the bottom up towards the "eye" end. From the end of the screw blade to the handle is 380mm and cylindrical, but this changes at 550mm from the "eye" end to a 14mm x 10mm rectangular shape shaft.This shaft end is welded to the "Eye".On the shaft below the "eye" is stamped " MATHESON GLASGOW" on the front side and a spade (cards) symbol on the back.auger, hand drill, fencing, tool, rural trades, brace & bit

This item was before diesel, electric and battery drilling apparatus were used by farmers, and other trades requiring a portable yet reliable method of drilling holes. As this item is a 3/4 inch hole drill it would be suitable for fencing and providing holes for structural studs. As with all outdoor farm equipment, man power was required (be it the farmer or farm hands). Fitness of the operator was at a high standard but protective gloves were not highly thought of as it was before occupational, health and safety regulations became mandatory over all manual handling activities, be they on rural properties or town/city factories. This period was one where the male ego was at its pinnacle i.e. the harder the tasks the more of a man was required. Hard manual work was not only the "way to go" but also a necessity. Evolution of cheap portable electric/battery powered tools opened up a more efficient method available, especially to those with less muscle strength.This item personifies the rugged environment of the rural workplace. The Kiewa Valley with its main emphasis on farming and grazing provided ample opportunity to use this construction implement. The manufacturer being a Scottish tool company is very significant in the era when this hole maker was in high demand. British steel products were of high grade and had a good record of reliability. The reliability of any tool was a solid factor for farmers and tradesmen in this semi-isolated region (Circa early 1900s) of the Kiewa Valley and its regional area. This factor,although not as crucial, post 1960s, when Asian manufacturers entered the market place and produced cheaper tools and transportation and supplies was more frequent and reliable, the need for the more expensive British made tools diminished considerably. After the influx of tradesmen from war torn Europe (post 1945) and the increased availability of tradesmen in the Kiewa Valley and its region the price of tools is not as crucial and the cost of all required tools has become a minimal part of the equation. It is only with the emerging younger trades person, farmer and grazier, who have more, "one eye on production costs" and no "old ties to the motherland" inert mind set that quality tools such as this auger and other hand tools "must be made to last a life time" is no longer part of the modern work environment.This cast iron hand operated drill, has a short barrel-shaped cylinder, known as "the eye" welded across the main rod and is 30mm in circumference. It also has a hole drilled to allow a screw to be fastened onto the hand stock ( not available).The main rod is solid for 400mm and then has been flattened and coiled (Helical screw blade) for another 200mm. At the end of the larger screw blade there is a smaller gauged starter blade with a pointer thread 15mm long. This Auger produces a 1/8th inch hole (metric measurement not used at time of manufacture) See KVHS 0469 for 3/4 inch hole and KVHS 0471 for another 1/8th inch hole.A number 5 stamped on the flat sideauger, hand drill, fencing, tool, rural trades, brace & bit

This item was before diesel, electric and battery drilling apparatus were used by farmers, and other trades requiring a portable yet reliable method of drilling holes. As this item is a 3/4 inch hole drill it would be suitable for fencing and providing holes for structural studs. As with all outdoor farm equipment, man power was required (be it the farmer or farm hands). Fitness of the operator was at a high standard but protective gloves were not highly thought of as it was before occupational, health and safety regulations became mandatory over all manual handling activities, be they on rural properties or town/city factories. This period was one where the male ego was at its pinnacle i.e. the harder the tasks the more of a man was required. Hard manual work was not only the "way to go" but also a necessity. Evolution of cheap portable electric/battery powered tools opened up a more efficient method available, especially to those with less muscle strength.This item personifies the rugged environment of the rural workplace. The Kiewa Valley with its main emphasis on farming and grazing provided ample opportunity to use this construction implement. The manufacturer being a Scottish tool company is very significant in the era when this hole maker was in high demand. British steel products were of high grade and had a good record of reliability. The reliability of any tool was a solid factor for farmers and tradesmen in this semi-isolated region (Circa early 1900s) of the Kiewa Valley and its regional area. This factor,although not as crucial, post 1960s, when Asian manufacturers entered the market place and produced cheaper tools and transportation and supplies was more frequent and reliable, the need for the more expensive British made tools diminished considerably. After the influx of tradesmen from war torn Europe (post 1945) and the increased availability of tradesmen in the Kiewa Valley and its region the price of tools is not as crucial and the cost of all required tools has become a minimal part of the equation. It is only with the emerging younger trades person, farmer and grazier, who have more, "one eye on production costs" and no "old ties to the motherland" inert mind set that quality tools such as this auger and other hand tools "must be made to last a life time" is no longer part of the modern work environment.This cast iron hand operated drill, has a short barrel-shaped cylinder, known as "the eye" welded across the main rod and is 30mm in circumference. It also has a hole drilled to allow a screw to be fastened onto the hand stock ( not available).The main rod is solid for 400mm and then has been flattened and coiled (Helical screw blade) for another 200mm. At the end of the larger screw blade there is a smaller gauged starter blade with a pointer thread 15mm long. This Auger produces a 1/8th inch hole (metric measurement not used at time of manufacture) See KVHS 0469 for 3/4 inch hole and KVHS 0470 for another 1/8th inch hole.auger, hand drill, fencing, tool, rural trades, brace & bit

The Cambridge Glass Company was chartered in 1873 by a group of Cambridge, Ohio businessmen. But it was not until 1899, when the site was purchased by the newly formed National Glass Company, that funds became available to start the construction of this new glass factory. n 1901, The Cambridge Glass Company was organized by the owners of the National Glass Company of Pennsylvania Arthur J. Bennett, a native of England, was hired to manage this new factory. Having experience in the china and glass trades. Many of the patterns were of Mr. Bennett's own design. Sometime around 1903-1904 the company's first trademark came into being, the words "Near Cut" pressed into the glass. Cambridge Glass soon became known worldwide for quality in both "crystal and colours, pressed and blown’. 1984. The National Cambridge Collectors purchased many of the moulds, all of the etching/decorating plates and other assets of Cambridge Glass from Imperial. The Cambridge Glass factory building was demolished in 1989A shallow factory made, frosted green glass vase. The central "frog" is a figurine in the shape of a draped lady, with ten holes at her base to hold flowers. The lady's shape is poorly moulded, indistinct and would have been cheaply made. No Makers Mark. Appears to be similar to vases made by Cambridge Glass Co, Ohio, America, (1901 - 1958), during the Depression. glassware, cambridge glass company, ohio, bennett arthur j., orme wilber l., national glass company, pennsylvania, imperial glass company, bellaire, pioneers, early settlers, herron john, bentleigh, market gardeners, moorabbin, cheltenham

The Ballarat Save TAFE campaign ran from 2012 to 2014. It was a Trades Hall and community campaign in partnership with the Australian Education Union and National Tertiary Education Union. The campaign was in response to significant financial cuts and closure of many courses by the Baillieu/Napthine governments. Availability of TAFE in Ballarat is particularly important in training future tradespersons and future provision of many services. Campaign President: Athan McCaw Campaign Vice-President: Brigid O'Carroll Walsh Campaign Secretary and Treasurer: Brett Edgington During the campaign, Premier Ted Baillieu visited Ballarat on several occasions only to be met by angry groups of citizens who were opposed to his government's decimation of Victorian TAFE. The picture shows one of the early rallies convened by the Ballarat Save TAFE Group and features Ted Baillieu entering a building in Lydiard Street, television reporters and a very noisy large group of protesters. As above (see historical information).jpeg filebtlc, ballarat trades and labour council, ballarat trades hall, tafe, union campaigns, baillieu, edward (ted), napthine, denis, education and training, nteu - national tertiary education union, aeu - australian education union

Lamson was established in Australia in 1898 with the idea for a store security money handling system being patented in the latter part of the 19th century.The practise of taking money from the counter and customer to the cashier was time consuming and cumbersome.Some bright ideas were employed including tying the money and dockets in a hankerchief and throwing it to the cashier. The first attempt to improve this was the ball system where a ball containing the cash was rolled to the cashier on an elevated track. The rapid wire system superseded this in the early 1900's and for the next 50 years it became a popular part of money handling in stores around Australia. This particular Lamson's cash carrier was installed in Youngers department store which was situated in Liebig Street. The success of Youngers store was partly responsible for the shift to Liebig St as the main commercial district. The Warrnambool Standard reported in 1901 that Younger and Co would operate on a wholly cash basis replacing incidental trades of goods such as potatoes and other farm produce.This item has strong social and historical significance. Apart from having strong links to one of Warrnambool's largest and longest running businesses, the object itself is of considerable interest with thousands of the original ball systems and Rapid Wire cash carriers being in use around the world. Cylindrical brass top with central circular part with section either side which have two small pulleys. A wooden cylindrical section slots in below with a wire clip attached at the bottom.Lamson is cast into the brass on either side of therim of the top circular section. . AUS is on the side of this same section. warrnambool,, youngers, youngers warrnambool, lamson, lamson rapid wire cash carrier, wire cash carrier

Date is approximate. Donor is the widow of Thomas Hall. Biographical notes provided: Thomas was born in Melbourne on 14/9/1928 and lived at Olinda until c1932 when his family moved to 10 Pembroke Street, Surrey Hills. He attended Surrey Hills State School, then went on to Box Hill High School (and / or Technical School - both are mentioned). He bought a horse and cart in order to be able to make deliveries for trades people and hence pay his way through technical school. He attended technical school 3 evenings per week studying building, carpentry, plumbing, electrical work and bricklaying. He built many homes in the eastern suburbs. He played tennis and attended church at Church of Christ. Married Margaret on 2/4/1955. Retired to Dromana where he was a member of the garden club at Redhill. Died 24/7/2004.Black and white photo of a boy identified as Thomas William Hall of 10 Pembroke Street, Surrey Hills sitting on a delivery cart with Snowy the horse in harness. "T Hall / ....." is painted on to the side of the cart. Taken in the backyard of his home in readiness for making deliveries."THOMAS WILLIAM HALL / BORN 14.9.28 DIED 24-7-04" in blue biro on rear of photo at top.hall, thomas william (mr), horse drawn vehicles

In February 1913 the Ballarat Junior Technical School opened its doors to its 86 pupils. The old bluestone building in the grounds of the Dana Street Primary School became their temporary for eight years. In its early years the school offered only a two-year course. The first year was of a general nature giving a thorough grounding in Mathematics and Instrumental Drawing, and introducing students to the various branches of trade work. The second-year students studied for the Junior Technical Certificate and specialized in a course of their choice - either a trade (Woodwork or Fitting and Turning) or a course leading to higher studies at the School of Mines. This pamphlet was provided to parents whose boys wished to attend the new secondary school. Four page pamphlet outlining what the Junior Technical School aims to provide for boys who have reached a certain level of education and wish to study further. Areas covered are Day Courses, First Year Course, Second Year Course, Reduced Tram and Railway Fares, Free Tram and Railway Travelling and Compulsory Drill.ballarat junior technical school, dana street primary school, mathematics, instrumental drawing, trade work., junior technical certificate, woodwork, fitting and turning, school of mines, secondary school, trades, 104 doveton street

Sent from Germany by Elfriede & Paul Faig.Tools belonging to W. Hermann / G. Kaltenbach - 1. Small metal handle|2. Drilling device, made of metal and possibly made on lathe (no. 7955).|3. Metal thread cutting tool (originally Australian).tatura, camp 3, faig, p, kaltenbach, g, hermann, w, trades, metalworking, handcrafts, woodturning

A hammer is a tool with a heavy head and a handle, often made of shock-absorbent wood or fiberglass that is used to strike an object. The most common uses for hammers are to drive nails, fit parts, forge metal, and break apart objects. Hammers vary in shape, size, and structure, depending on their uses. Hammers are basic tools in many trades. A hammer is composed of a head most often made of steel and a handle also called a helve or haft. Most hammers are hand tools. A traditional hand-held hammer consists of a separate head and a handle, fastened together by means of a special wedge made for the purpose, or by glue, or both. This two-piece design is often used, to combine a dense metallic striking head with a non-metallic mechanical-shock-absorbing handle -to reduce user fatigue from repeated strikes. If wood is used for the handle, it is often hickory or ash, which are tough and long-lasting materials that can dissipate shock waves from the hammer head. A well used hammer with wooden handle and steel headpioneers, early settlers, market gardeners, moorabbin, brighton, cheltenham, tools, craftsman, carpenters, blacksmiths, builders, woodwork,

Ted Rowe was a delegate of the Amalgamated Engineering Union and was Ballarat Trades Hall President for two years - 1941-1942. He was also an activist in the Communist Party of Australia. The collection includes a memoir from one of Rowe's descendants. Original documents not held. Items are print-outs and photocopies. 1. Sydney Morning Herald (NSW), 18/5/1949, Communists Seek Control of Powerful A.E.U. 2. Tribune (NSW), 25/8/48, Party Life 3. Tribune (NSW), 5/10/60, Passing of "Ted" Rowe 4. Tribune (NSW), 12/10/60, FUNERAL ORATION FOR E.J. (TED) ROWE: "Outstanding son of working class, Party" 5. Tribune (NSW), 12/10/1960, TED ROWE'S FUNERAL 6. Tribune (NSW), 19/10/60, Ted Rowe: Last Respects 7. Olive, Doug (Communist Party of Australia, Queensland), n.d., "The Queensland Railway Strike" (excerpts) 8. Moloney, Gary (descendent/grandson), "Memories of E.J. Rowe"Trade union history and of particular significance to Ballarat Trades and Labour Council and the Amalgamated Engineering Union.Copies of press clippings and other documents.btlc, ballarat trades and labour council, ballarat trades hall, rowe, e.j. - ted, aeu, railway strike, queensland, communist party australia, obituaries - death notices - funeral notices, industrial action, memoir, amalgamated engineering union

Rodney SCHERER (24/02/1951 - ) Born Campbelltown, NSW Rodney Scherer studied at the National Art School, East Sydney Technical College (1968 -1972); the Canberra School of Art (1973-75) Dip, Art Gippsland Institute of Advanced Education (1978); and a Grad, Dip, Art (Painting) at Gippsland Institute of Advanced Educaton (1985). He curated a number of significant exhibitions for the Gippsland region of Victoria, including the first national travelling exhibition of regional artist "Contemporary Gippsland Artists 1990-92". Rodney Scherer is a painter, printmaker, sculptor, Curator, retired Public Gallery Director, and fine art consultant. He was the founding chair of the Art Resource Colelction, arcYinnar. He was an Artist in Residence at teh Gippsland TRades and Labour Council, Yallourn Power Startion in 1991, and site manager of the Fifth Sculpture Triennial at the 1992 Melbourne International Arts Festival. In 2021 he curated "The Happy Wanderer. Victoria Cobb 1876-1945" at the Gippsland Art Gallery, Sale, Victoria.This work was purchased by the donor from Rodney Scherer's solo exhibition 'Ubiquitous Orange' at Sparc Gallery, Yinnar.rodney scherer, alumni, sculpture, available

The illuminated signs in this photograph were erected over the main Lydiard Strert entrance to the Ballarat School of Mines somewhere around 1960. The signs were erected by Principal Harry Arblaster in an attempt to emphasis the Diploma Courses were of a tertiary level. Black and white photograph of Ballarat School of Mines building in Lydiard (south) Street, Ballarat. The photo features to signs. The first one includes the word 'The Ballarat School of Mines and Industries, and well as the Ballarat School of Mines shield. The other sign includes the word 'Professional courses, Geology, Chemistry, Civil Engineering, Mechanical Engineering, Electrical Engineering, Metallurgy, Art"ballarat school of mines, professional courses, gology, chemistry, civil engineering, mechanical engineering, electrical engineering, metallurgy, art, trades, arblaster, harry arblaster, illuminated sign