Two sheets or four pages from The Herald Sun, 19/4/1995 about the Parade of historic trams in Swanston St that day, titled ”Tram Day - A Celebration of Trams” , with event details, some history of the tramcars and an item “Our Landmark on wheels” written by Keith Dunstan - about his thoughts on Melbourne and its trams, cable trams and that they are a Landmark (see also reg Item 1873). Photos of V214, HTT 8, S 164, B1 2001, L 104, W2 510, W 380, X2 676. Has advertisements from ABB and Gonanin. see Reg Item 3639 for some photos of the event.trams, tramways, melbourne, tourism, w class, parades, swanston st, tram 214, tram 8, tram 2001, tram 104, tram 510, tram 380, tram 676

The P. S. Edwards was built in May 1875 by J. M. Webb, Echuca. Official number 73287, made of wood, with paddle wheels at the side. 78 gross tons, 27 nett tons. It was altered in 1916 , after cabin removed 48 gross ton. It had 7 different owners before being purchased by R. J. Evans, of Evans Bros. Saw Mill, Echuca, in 1919. The P. S. Edwards was sunk at Echuca in the spring of 1958 and then raised in January 1981 and then was being restored by Geoff Evans in 1985 (Parsons, Ronald. Ships of the Island Rivers. 3rd ed. 1996. p.67) The barge Ada was built in 1899 at Echuca by the Permewan Wright Company. The Ada hull was built of part wood and part steel, to protect the wool from becoming wet on the voyage down the Darling River to the Echuca Wharf. The Ada was used as a logging insider barge as well as a wool barge with the Pevensey on the Darling River.The P. S. Edwards has historical and social significance being a paddle boat built in Echuca. The P. S. Edwards was built in May 1875 by J. M. Webb, Echuca. It had 7 different owners before being purchased by R. J. Evans, of Evans Bros. Saw Mill, Echuca, in 1919. The P. S. Edwards was sunk at Echuca in the spring of 1958 "and as the mill was burnt in 1959 salvage was not attempted. She was raised in January 1981 and in 1985 was restored by Geoff Evans. While owned by Evans Bros, was used to bring red gum from the Barmah Forest to the sawmill in the barge Clyde." (Parsons, Ronald. Ships of the Island Rivers. 3rd ed. 1996. p.67) The barge Ada was significant because of the construction of the hull, being part wood and part steel. The Ada was used as an inside looking barge as well as a wool barge with the P.S Pevensey on the Darling River. The barge Ada is still on display at the slipway at the Port of Echuca. A black & white photograph of the P. S. Edwards towing the barge "Ada". A large tree is in the foreground and frames the boats. The boats are on a bend in the river. The barge appears to be laden with timber.In blue pen on reverse of photograph are written the words ? Adelaide (crossed out) Edwards & Ada barge ID4. Geoff Evans ? ( also crossed out). port of echuca, p. s. edwards, evans bros saw mills, ada barge, wool industry, p.s pevensey, darling river

Ken Peeler (at head of horse), Ken's father, Ern Peeler and brother Don Peeler (sitting on load) with dray-load of 'five-foot wood'. Peeler's Road, Barkers Creek. Photographed by Alice 'Girlie' Adams, approx. 1942. Families living at Barkers Creek and Woodbrook obtained contracts to supply 'five foot wood' to Thompson's Foundry and Castlemaine Woollen Co. Rows of wood, neatly stacked, 10’ high X 5’ wide covered many acres at each factory, ready for use in firing the boilers. Much bushland was thus cleared for orchard or pasture. The horse depicted is fully harnessed with bridle, eye-winkers and reins, dray collar, hames, shaft saddle with girth & pole straps and breeching straps. Neatly stowed under the dray shafts can be seen the props, used to keep the dray horizontal when the horse was to be taken out of the shafts. The dray was almost entirely constructed of wood, with steel tyres on the wheelsA reminder of the significance of local sources of fuel to some of Victoria’s biggest manufacturing concerns as well as depicting a major source of employment involving minimal capital. A B&W photograph depicting 2 men and a boy with a horse-drawn dray filled with wood. Photograph taken by Alice 'Girlie' Adams in 1942. Ken Peeler, Ern Peeler and Don Peeler appear in the picture along with a horse with no known name.

Legatee Donovan Joynt at the opening of the Puckapunyal Sportsman's club that was named after him. The notes, dated March 1983, could have been for a newspaper article. "IT'S A HELPING HAND... for one of Australia's most distinguished soldiers outside his own memorial at Puckapunyal. Sapper Mark Drummond of Seymour, a member of 21st Construction Squadron, which built the Memorial, holds an umbrella and commander 3rd Military District, Brigadier Geoff Cohen of Canterbury, wheels Lieutenant Colonel Donovan Joynt VC to lunch. Lt Col Joynt, 94, donated more than half the cost of the $130,000 Donovan Joynt VC Memorial Sportsman's Club in the background. The building had just been officially opened by the Chief of the General Staff, Lieutenant General Sir Phillip Bennett of Canberra." See also Cat Nos. 01303, 01349-51 and 01588 which is an album that contained lots of details about his life.Part of the collection of material held by Melbourne Legacy on Legatee Donovan Joynt, a prominent Australian and VC winner.Black and white photo of L/- Donovan Joynt in Puckapunyal with paper notes taped to the backBack of the photograph has grid lines ruled in blue biro together with annotations 'B/C Pic.3' and '55 x 56' Notes are annotated M1306 in blue biro.donovan joynt, memorial

Book - 10 pages + 13 drawings sheets of rail cross sections contained within separate printed covers (colour fleck), titled "British Standard - Tramway Rails and Fish Plates - Standard Sections and Specification - July 1903". Side stapled and then bound with a green tape on left hand side. Gives details of the standards of the materials, rolling, payment, conformity, testing, marking holes for both rails and fishplates. Drawings for 13 different weight rails, straight and curves, 90lb/yard to 116 and a drawing of the BS tyre profile for tram car wheels and how it interfaces with a rail. On rear cover, both sides gives a list of standards and foreign translations up to March 1919.On top of first sheet in black ink "Ballarat Tramway Preservation Society Catalogue No 8."trams, tramways, british standards, standards, rails, fishplates

Set of 8 colour prints of a tram cavalcade in Swanston St Melbourne - 19/4/1995 about the Parade of historic trams in Swanston St that day, titled ”Tram Day - A Celebration of Trams” , See Reg Item 1876 for event details, some history of the tramcars and an item “Our Landmark on wheels” written by Keith Dunstan - about his thoughts on Melbourne and its trams, cable trams and that they are a Landmark (see also Reg Item 1873).. .1 - HTT 8 with the Melbourne Town Hall in the background. .2 - 104 ditto .3 - horse tram 256 with No. 8 behind .4 - 774 .5 - 862 .6 - 217 .7 - 431 .8 - 380trams, tramways, melbourne, tourism, w class, parades, swanston st, events, horse trams, tram 8, tram 104, tram 774, tram 862, tram 217, tram 431, tram 380, tram 256

A tyre bender is used to bend and shape metal rims for wooden wagon wheels. This tyre bender’s model first appeared in the Day Bros catalogue in 1884 as the “Giant” model. The catalogue of 1883 only showed a lighter duty model called the “Lion”. It can be assumed that this later “Giant” model was a heavy duty improvement over the 1883 "Lion" and other smaller models which were still being advertised for sale in 1884. The Day Bros foundry, makers of this tyre bender, was operating as the manufacture of wheel right and blacksmith tools and general machinery in the 19th century in the USA and successfully exported their goods all over the world. Wagon tyre benders would have been very common circa 1850-1920, so there were probably many makers over the years. Early on, it would have become clear to the blacksmiths about which designs worked best so, eventually, the various makers would have made similar products to each other. This tyre bender was once used by Harry Goodall of H. Goodall & Sons Pty. Ltd. corner of McKinnon and High Streets, Terang. Victoria. Henry Goodall & Sons Henry Goodall (1870-1936) was proprietor of garages as H. Goodall & Sons Pty. Ltd., at both Terang (McKinnon and High Streets) and Mortlake (Dunlop Street). His business was in operation in at least in 1916 and perhaps well before, considering the date of the tyre bender and its use for wagons with wooden wheels. It was still in operation in 1953, chasing up debtors in Mount Gambier Court. Amongst the employees of H. Goodall & Sons Pty. Ltd. was Ernie Entwistle, a blacksmith (a soldier who died in 1916 ) and Alfred Hodgetts, radio expert (killed in a fatal accident in 1943, when he was in his early 30s ). Henry Goodall was involved in the community as a Justice of Peace, a deputy coroner, President of the Mortlake Hospital, trustee of the Soldiers’ Memorial Hall, and as a prominent Freemason. He and his wife had two sons (Charles and John) and one daughter (Mrs. Chas. Newton, of Skipton). The tyre bender is significant as it demonstrates how blacksmiths or wheelwrights could make new metal rims for wagon wheels for carts, wagons, stage coaches and carriages over a 135 years ago. The machine is a part of our social history as it demonstrates part of the process of making wagon wheels, which played an important part in aiding the continuation of daily transport needs that people had at the time, such as farming, personal transport and commercial activities. The machine or tool is locally significant as it was used by a local company in Terang and Mortlake in their blacksmith, wheelwright and garage business. Steel tyre bender mounted on timber base, used for wagon wheel steel rims. Made from cast iron and steel, double geared with four cogs to unite the upper and lower steel rollers. There are adjustable guide collars to keep the iron in line while it is being bent. It can also be used with two cranks for heavy duty work utilising the use to two operators. It is the Giant model, made in 1884 by Day Bros. of Philadelphia. This tyre bender once belonged to Harry Goodall & Sons, blacksmith's of Terang. Victoria. “DAY BROS. PHILAP. PA” cast into the side of machineflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, machinery, wagon wheel, wheelwrights, blacksmith, steel rim wheels, tyre bender, tire bender, the giant tyre bender, henry goodall (1870-1936), terang, wheelwright tool, blacksmith trade, blacksmithing equipment and supplies, wagon tyre bender, day bros. philadelphia pennsylvania, h. goodall & sons of terang, terang blacksmith, h. goodall & sons pty ltd, mortlake, ernie entwistle blacksmith, alfred hodgetts radio expert, charles goodall, john goodall, mrs. chas. newton nee goodall

X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballan, train of knowledge, x48, x-class diesel locomotive

X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballan, train of knowledge, x48, x-class diesel locomotive

X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballan, train of knowledge, x48, x-class diesel locomotive

X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballan, train of knowledge, x48, x-class diesel locomotive

X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballan, train of knowledge, x48, x-class diesel locomotive

X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballarat railway station, train of knowledge, x48, x-class diesel locomotive

X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballarat railway station, train of knowledge, x48, x-class diesel locomotive

X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballarat railway station, train of knowledge, x48, x-class diesel locomotive

X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballarat railway station, train of knowledge, x48, x-class diesel locomotive

X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballarat railway station, train of knowledge, x48, x-class diesel locomotive

X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballarat railway station, train of knowledge, x48, x-class diesel locomotive

X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballarat railway station, train of knowledge, x48, x-class diesel locomotive

This photograph records the making and placing of the concrete blocks for the construction of the Warrnambool Breakwater in the Warrnambool Harbour, completed in 1890. Each block weighed 20 to 30-plus tons. The huge Titan steam powered crane in the photograph played a massive role in the construction. It was able to lift the concrete blocks with its overhanging, counterbalanced arm and roll on its wheels along the rails to the required position. It then lowered the blocks into position on the concrete foundation already laid on the seabed. There are many details in the photograph that help to tell other aspects of Warrnambool's history. It appears that the photograph was once owned by B. Fisher. The photograph is part of the Western Victoria collection produced in 1891 by Brookes' Photographic Union in Victoria. Brookes' Photographic Union was a collaboration of two brothers, Frederick Augustus Brookes and his brother Albert Edward Brookes. Frederick arrived in Victoria in the early 1880's. He and Albert formed the organisation to produce collections of photographs including the districts of Geelong, Gippsland and the Western Victoria.This photograph was taken during the construction of the Warrnambool Breakwater and published the year after it was completed. The project began with the Government of 1874 approving the plan, and was completed in 1890. The image records a snapshot of the construction of the Warrnambool Breakwater, a construction that changed the history of the Port of Warrnambool, Photograph, sepia coloured rectangular shape, mounted between two sheets of cream card. Border of photograph is decorated with pen lines and design in corners. Subject is the Warrnambool Breakwater construction with the Titan steam crane on rail lines, concrete blocks, a windmill and tanks, sheds, and a multi-storey building in the background. Produced by the Brookes' Photographic Union, Western Victoria. Inscriptions are on the reverse, on two stickers, a printed white label and a handwritten name.Stickers: "137" "F.Pn 61/2-74" Label: "WESTERN VICTORIA / BROOKES' PHOTOGRAPHIC UNION / HARBOUR WORKS, / WARRNAMBOOL." "The subject of this picture is the making of concrete blocks for the Breakwater. These blocks weigh from 20 to 30 tons each, and are lifted about by the large piece of machinery seen in the picture." Hand written: "B. Fisher"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, western district, western victoria, brookes' photographic union, frederick brookes, albert brookes, photograph, warrnambool harbour, harbour works, concrete bolcks, breakwater, warrnambool history, breakwater history, 1891, lady bay, port of warrnambool, b. fisher, titan crane, steam crane, concrete blocks

'Test Cricket' was one of the most popular board games in the pre television era. John Sands Pty Ltd, the publisher, was an Australian bookseller and stationer founded in 1837 and produced board games from 1929-78.Board game consisting of a rectangular cardboard piece illustrated with a cricket ground, players and a scoreboard. Two semi-circles have been cut away from the background and are used to control the progress of the game. The right hand game control is moved to 'ball' position (1-8) and back to start which indicates the type of delivery shown in the window. The left hand control is moved to 'type of delivery bowled' and back to the start which reveals the number of runs scored or method of dismissal which is shown in the window. The scoreboard is operated by three circular wheels that show the result of runs and wickets. An oval handle is at the upper centre. The packaging includes a green cardboard box with lid, which has an image of a batsman and a red cricket ball.board games, john sands pty ltd, cricket

This guillotine is a hand operated machine specifically designed to cut through multiple sheets of paper or card. It has a very heavy and sharp single blade knife mounted between vertical guides or runners. The main users of a machine like this is in by the printing and publication binding industry. Book binding companies use a guillotine to evenly trim the pages of a book after it has been bound. The way the guillotine is used is - paper or card is stacked squarely on the flat table and pushed firmly against the back guide - the handle below the table at the front of the machine is wound around, which brings the back guide forward, pushing the paper stack forward and positioning the centre of the stack below the vertical frame - the upper wheel is wound around, which brings the clamp and firmly in position on top of the paper, to hold it very firmly - the large wheel on the side of the machine is turned around to lower the long sharp blade down onto the pages and cut them through. The sharp edge of the blade is protected somewhat from becoming blunt; a block of wood sits in the table under the stack of paper An early model of a guillotine was patented in 1837 by Thirault, who built a model with a fixed blade. Guillotines similar in principal to this one were patented by Guillaume Massiquot in 1844 and 1852. Over the years many improvements have been made and operation has moved from man power to electricity. Oscar Friedheim Ltd. was the importer and wholesaler of a large range of machinery and equipment for the printing and bookbinding industry. He sold most of his equipment under his own name. On this guillotine or paper cutter he refers to the origin of the guillotine’s manufacture only as “German Manufacrure”. A reference book “Commercial Bookbinding: a description of the processes and the various machines used" by Geo. Stephen, 1910, recommends Oscar Friedheim, amongst others, for the supply of “reliable cutting machines for hand or power”. It also recommends Oscar Friedheim’s for a wide range of other printing machinery and processes. OSCAR FRIEDHEIM LIMITED, LONDON Oscar Friedheim Ltd. was established in 1884 and operated from Ludgate in London. The company was an importer and wholesale supplier in the 1880’s, offering machinery and equipment for the printing and packaging industry for the UK and Ireland. The company became incorporated in 1913. An advertisement of 1913 includes a telegraphic code plus two telephone numbers for Oscar Friedheim Ltd and invites readers to call at the Ludgate, London, showrooms to see the machines working. The company later became Friedheim International Ltd. The book titled “Friedheim, A Century of Service 1884-1984 by Roy Brewer, celebrates Oscar Friedheim’s achievements. Friedheim International currently operates from Hemel Hempstead, on the northern outskirts of London UK. It promotes itself as “… the leading supplier of finishing, converting and packaging machinery to the printing, graphic arts, and highly varied packaging industries in the UK and Ireland. The company’s policy is simple – “employ the best people, work with the best equipment manufacturers in the world, and treat our customers as partners!” The company still sells guillotines. The guillotine is significant for its ability to represent aspects of the printing trade in Warrnambool and in a typical port town circa 1850 to 1910. It represents communication methods and processes used in the time before electrically powered equipment became common in industry.Guillotine (or paper cutter), hand operated. Metal framework with vertical guides, stand and metal mechanical parts including wheels and gears. Table with back guide; handle below front of table winds to move the back guide. A wheel at top of machine winds to adjust pressure of the clamp on the work on the table below it. The cutting blade fits between vertical guides; a timber insert in the table below the blade helps minimise the loss of sharpness of the blade. A handle on the side of the machine turns a large spoked wheel, which rotates a large gear, causing the blade to move up and down. Makers details are on a small oval plaque with embossed maker’s details is screwed onto main body. Maker is O Friedheim, London, and the machine is of German manufacture, circa late 1880’s.Maker’s plaque inscribed "O. FRIEDHEIM / London / German Manufacture"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, printing machinery, printer’s guillotine, paper guillotine, paper cutter machine, oscar friedheim ltd london, friedheim international ltd, bookbinding industry, printing industry

Yields information about the instructions issued to Motormen in Ballarat by the Electric Supply Co. for driving and operating tramcars.Instruction - 6 quarto sheets stapled in top left hand corner - retyped from an original Electric Supply Co. of Victoria (ESCo) document with a black hand written heading Motormen! Take No Risks", detailing motormen's behaviours, operations, braking, tram car lights, steps, ticketing, recruit motormen, shunting, speed, trolley wheels, changing cars, trailers, controllers, testing magnetic brakes, switches, timetables, fares, tram stops, section staffs, holidays, uniforms, breakdowns, smoking, lost property, headways, gong signals, conductors, whistle signals, instructions to recruit motormen. 7th page - details motors and how to get your car ready for service and how to apply power. (see btm8096i1.pdf) page 8 missing. trams, tramways, esco, training, instructions, motormen, operations

Set of sheets with small newspaper clippings and a circular advertising the Ballarat Tourist Tramway operational details and fares collected by Paul Nicholson on behalf of the BTPS. 3725.1 - series of four number A4 BTPS letterhead with cuttings from The Age and other sources - dated Jan. 1978 to May 1980 pasted onto the A4 sheets with handwritten notes about date and source. 3725.1 - RACV Touring Bulletin - Volume 19, Number 4 - foolscap, double side duplicated sheets, with a blue banner on the front. Dated Wed. 7/3/1979, with items about 25 Years of Moomba, Tourist Tramway - Ballarat, giving dates, time and fares, Highland Gathering, Melbourne Tattoo and the Pioneer Country Sound and Wheels Festival - Swan Hill.tram, trams, btps, advertisements, publicity, racv

Comb bound (white plastic) specification document, approx. 70 pages, with glossy card covers, titled "Tender Schedule for All-Electric Trams", published by the Melbourne and Metropolitan Tramways Board, closing 2 Oct. 1972. Details the conditions of tender, conditions of contract, notes, specification, gives background information about Melbourne, dimensions, performance, drivers and conductors, trucks, wheels, brakes, electrical equipment, control panels and drawings. The drawings give a map of the system, typical city route, Glenferrie Road route (grade diagram), concrete track construction, min. radius curves, loading gauge, all-electric tram and mounting details for the trolley base, schedule of prices, tender form, form of contract, schedule of information to be provided by the tenderer.trams, tramways, specification, tenders, z class trams, mmtb, melbourne

The collection of thirteen model horse drawn vehicles were carefully handmade by Mr Chas W Davis 1925 - 2002. He was a talented artist and saw doctor. This model of a horse drawn Rosa Buggy replicates the vehicle that enjoyed respect from the public during the 1880's. There were four horse drawn models as well.A model of a Rosa Buggy which is a lightweight two wheeled two passenger open horse drawn carriage where the driver sits behind. It has two large gold painted spoked wheels with black rims, brown padded seating and silver painted armrests. There are two long brown wooden shafts on each side to surround the horse. It has a model of a cream coloured horse with a white tail and mane, which has the necessary horse tack for carriage use to help the driver communicate with the horse. It was designed by Duncan & Fraser of Adelaide initiated by the wife of one of the company's directors who gave it her name. It was a hybrid of the Dog Cart and Ralli Trap, a fair weather vehicle favoured by ladies of refinement. It was mounted on Brewster Gear and was inclined to bounce, so was driven gently.replicas, models, scale models, vehicles, carriages, horse drawn vehicles, toy horses

The collection of thirteen model horse drawn vehicles were carefully handmade by Mr Chas W Davis 1925 - 2002. He was a talented artist and saw doctor. This model of a horse drawn Dairy Cart replicates the vehicle that enjoyed respect from the public during the 1880 and early 1900's. A model of a horse drawn black open Davis Dairy Buggy or Cart which is a lightweight two wheeled one passenger open horse drawn carriage where the driver sits behind. It has two large gold painted spoked wheels with black rims and mudguards, blue painted seating and gold painted armrests, two gold coach lamps and gold patterned footrest in front of the driver. At the rear are three silver milk cans with two taps to dispense the milk. There are two long brown wooden shafts on each side to surround the horse. It has a model of a brown coloured horse with a black tail and mane, which has the necessary horse tack for carriage use to help the driver communicate with the horse. These carrier carts or vans were two wheeled medium weight Commercial Vehicles.DAVIS DAIRY painted in white lettering on each side of the cart.replicas, models, scale models, vehicles, carriages, horse drawn vehicles, toy horses, early commercial vehicles, milk cart

Agfa Colour slide, cardboard mount, by Keith Caldwell dated 12 March 1960, of W5 818 running in Mount Alexander Road, North Essendon, crossing the street access for Marco Polo Street. The tram showing route 59, Essendon Aerodrome, has trolley wheels and has a second person in the cab, possibly a trainer. Unusually the tram number is placed above the headlight, In the background are the palm trees in the centre median plantation. The house with the red guttering is one that dates back to the gold mining era. See http://www.esshissoc.org.au/1070%20Mount%20Alexander%20Road.pdf It was relocated to Woodland Park during 2017? Note the Centre poles, overhead construction and street light. Also in the background is a Mobil Service station that later became a garden centre. Now a block of apartments.hand stamped "12 Mar '60"trams, tramways, mount alexander rd, north essendon, essendon airport, essendon aerodrome, route 59, w5 class, tram 818

Professor Arthur Barrington (Barry) Baker was the first Australian anaesthetist to gain a DPhil in anaesthesia. He completed his DPhil at Oxford University at the Nuffield Department of Anesthesia in 1971, titled, Physiological Responses to Artificial Ventilation. The Waveform Ventilator is the machine developed to illustrate his DPhil. The waveform ventilator was used in several scientific studies on 'the effects of varying inspiratory flow waveforms and time in intermittent positive pressure ventilation (IPPV)', published in the 'British Journal of Anaesthesia'. Professor Arthur Barrington Baker had an extensive career in research and clinical practice including holding the position as the Nuffield Professor of Anaesthetics at Sydney university (1992 - 2005) and also as the Dean of the Australian and New Zealand College of Anaesthetists (ANZCA) (1987-1990).The variable waveform ventilator is of national significance, due to its association with Professor Arthur Barrington Baker (Prof. Baker) the first Australian academic anaesthetist, and the representation of historical social themes and research and design, in anaesthesia. Historic significance – It is a rare type of ventilator in good condition and well provenanced. It is a tangible record of the beginning of the long established and distinguished career of Prof. Baker, the first anaesthetist in Australia to gain a DPhil. Prof Baker has a strong involvement in the Australian and New Zealand College of Anaesthetists (ANZCA) organisation. The object is a product of Prof Baker’s Doctorate of Philosophy (DPhil) on respiratory physiology and is associated with the prestigious Oxford University and the well-known Nuffield Department of Anaesthetics. It also represents the social theme of migration to England from Australia in the 1960s and 1970s to access and experience academic and artistic opportunities limited in Australia at the time. Scientific Value – The object is of scientific value as it offers major potential for education and interpretation in anaesthesia. Although ventilators are common equipment, this specific design and construct prototype is one of a kind, designed and used specifically for research purposes. A rectangular shaped object on a trolley with four wheels. The top half of the object consists of two panels, one of cream coloured painted wood, the other black plastic, both containing several dials of different shapes and sizes. The wood surface also contains several gauges and a safety pressure clear plastic box. The plastic surface also contains a pin board. The bottom half of the object consists of two shelves. The whole object's perimeter is lined with perforated metals. The top wooden surface has several metal pieces of equipment and a long tube. The rear of the object contains numerous types of tubing and wire, a gas cylinder and two leather straps with buckles. The bottom half of one side of the objects has 3 electrical power outlets.Waveform Generator, Drs Colliss N Cowie, Dr Baker Dr Murray Willson, Dr Babbington, Safety Pressure, Error POS F/B, Position, Feedback, Set Balance, Reset, Full Stroke, Velocity, Converter Current, line Pressure, Low Pressure, Bias Pressure, Start, Stop, Stop, Reset Press, Max Press, W/G Output, A/CRO B/2.baker, arthur barrington, baker, barry, professor, academic anaesthetist, oxford university, nuffield department of anaesthesia

Yields information and demonstrates SEC Meeting minutes about discussions between the three Provincial operators about tramcars and operations.Minutes - 36 duplicated foolscap sheets pinned with a folding clip in top left hand corner - titled "Tramway Maintenance Minutes of 4th Annual Conference April 26, 1954 and May 1, 1954", in the Ballarat and the Melbourne offices Topics covered - cleaning of trams, tracks, track surface repairs, sleepers, car renovation, painting, flooring, notes on a Ballarat Field inspection, disinfecting blinds, electrical systems, truck maintenance, castings, maintenance costs, trolley wheels, oils and greases, alternation to Maximum Traction trams, spare part, fatigue of axles, accidents, track cleaners, shedmen, union claims,, amenities and a summary of actions. Each item where relevant looks back at the actions from the previous conference. Has a list of attendees. trams, tramways, minutes, sec, geelong, ballarat, bendigo, tramcar equipment, maintenance, trackwork, overhead, painting, trolley wheels, motors, one man trams, employees