This Elector's Right Certificate, No. 206179, is for Samuel Richardson, a sawyer, who lived at Bullarook in the Ballarat East Division. It has been signed by W. Cantwell, the registrar and by Samuel Richardson. As a resident and a male he was entitled to vote in the Ballarat East Division at Victorian State elections. Samuel Richardson was a sawmiller and farmer in Orbost. He built The Curlip, a wooden paddle-steamer of 9 tons gross and dimensions of 43 feet long, 10 feet wide and a depth of 3 feet, on the slipway at their Tabarra sawmill in 1890. This item is associated with the Richardson family, early Orbost pioneers,A white paper certificate with black print and hand-written details. at the top is the British coat-of-arms. It is an elector's right certificate made out to Samuel richardson.suffrage richardson-samuel elector's-right-certificate

From the THE LAND ACT 1884.-REGULATIONS: "Any person duly licensed under section 93 of The Land Act 1884 to cut and take away any live or dead timber on Crown lands, and any person specially licensed in that behalf by the Governor in Council, may at all times enter upon the said land and therefrom cut and take away live or dead timber. "The Richardson family was one of the very early settler families to establish themselves in the Orbost district. Samuel Richardson was builder of the Paddle Steamer Curlip.A white paper licence certificate No. 182 made out to Samuel Richardson & Son for the purpose of a Saw Mill. It was to cost ten pounds per annum. Print is black and details are hand-written.richardson-samuel certificate-lands-sawmill

Donated by Mrs Catherine Ah Chow. A roughly improvised metal knuckle duster which is made of iron with cord wound around a metal shaft. A "U" shaped piece fits onto either end of the shaft. Presumably, a person's hand clasps the cord wound shaft and the metal "U" piece is for inflicting damage to the opponent in a fight.

Children used slates to practise writing letters and numbers. They sometimes used their slates to play games when not learning their lessons Early models of small, hand-held chalkboards were slates encased in a wood frame to keep the slate from breaking. Pencil and paper were available but paper was very expensive. Using a small, hand-held slate meant that a child could practise writing, erase and write again without having to consume expensive paper.This item is an example of early educational equipment and can be compared to modern school equipment.A double-sided rectangular-shaped school slate with a wooden frame.Chalk markings - number sentences. On frame-Made in Portugalschool-slate education writing educational-equipment

Sunshine biscuits were made in Ballarat from 1921. During WW11 Sunshine biscuits devoted 80 percent of its output to army services. The company was twice devastated by fire. In 1923 the factory was completely destroyed and was rebuilt as a more modern factory on the same site. In 1939, a deliberately lit fire demolished the workshop. Sunshine biscuits continued to be sold until 1991. Biscuits were sold by weight from a large tin in the grocer's shop.This tin seems to be a commercial tin used in a grocery shop. It would have been used in an Orbost grocery store e.g. Dicken's, Baughhaust's or Herbert's.Biscuits were once sold by weight from a large tin in the grocer's shop.This tin seems to be a commercial tin used in a grocery shop. It would have been used in an Orbost grocery store e.g. Dicken's, Baughhaust's or Herbert's.Large rectangular commercial biscuit tin, made from pressed metal, with a lid. There is a paper label on the front which details the contents, and manufacturer details. It has a colourful label which is in poor condition. On label - in a dark blue banner SUNSHINE. Left hand side vertically BALLARAT PRODUCTS LIMITED. Below the SUNSHINE banner - Sweet Assorted, Superior biscuitssunshine-biscuits food biscuits container tin

Phonograph cylinders are the earliest commercial medium for recording and reproducing sound. Commonly known simply as "records" , these hollow cylindrical objects have an audio recording engraved on the outside surface, which can be reproduced when they are played on a mechanical cylinder phonograph. The "Gold-Moulded" process was developed in 1902 and involved creating a metal mould from a wax master; a brown wax blank would be placed inside and heated . as the blank expanded, the grooves would be pressed into the blank which would then be cooled. The "gold" is derived from the traces of that metal used as a conductive agent in the initial mould. "Whistler and his Dog" was performed by the Edison Military Band.Edison Records was one of the earliest record labels which pioneered sound recording and reproduction and was important in the early recording industry. Gold Moulded records used a process that Edison had developed, that allowed a mould to be made from a master cylinder which then permitted the production of several hundred cylinders to be made from the mould. Previously cylinders were recorded live or by hooking two machine together to copy from one cylinder to another, and they used softer brown wax which wore out in as few as twenty playings. Gold Moulded Records were discontinued in 1912.A cardboard cylindrical record container. It is an Edison Gold Moulded Record container. The label has red and gold print and a photo Thomas A. Edison.Hand-written on lid - Whistler & His Dogedison-gold-moulded-cylinders sound-recording records

A paper bank cheque from the Commercial Bank of Australia. It is made out to Shell Co. of Australia for the sum of £1-14-9. It has a purple ½d sta½mp duty in the top left hand corner and an embossed 1½d on the right hand side. The cheque is unsigned.13 April 1933cheque commercial-bank

In the first half of the 20th century knitting needles were much easier and cheaper to come by than sewing machines. This is possibly why hand knitting was so popular. This pair of knitting needles are part of a time when women often made the family clothing. A pair of No. 7 pink plastic knitting needles.knitting-needles handcraft knitting leisure

This was owned and used by J.G. Ralston of Orbost. John Gavin Ralston was born 26 July 1914 at Eden, N.S.W. and came to Orbost in the early 1920's, with his parents and siblings. They lived at the corner of Tennyson and Salisbury Streets. Jack was educated at Orbost Higher Elementary School before being apprenticed to William Ross at the Snowy River Mail as a lino-type operator. He married Jean Cameron. After WW11 when he served overseas in the islands) He resumed his trade at the Snowy River Mail until 1949 when began J.G.& J.M. Ralston, Seed & Produce Merchants. Jack Ralston was very involved in the Orbost sporting community, the Presbyterian Church and the Orbost Municipal Band. He also served in the Orbost sub-branch of the R.S.L. He died on April 15 1967. (ref. Margaret Smith O.D.H.S. Newsletter) Collecting match box holders / grips was a popular hobby. They were made to fit over a box of matches for protection. Some were especially produced for significant occasions. This item is an example of a very common personal item rarely used today.A painted metal matchbox cover with a thin wooden matchbox inside. It is cream coloured with a picture of a cricketer being bowled out. In the top right hand corner is "OWZAT". The matches are Bryant & May's Crown Safety Matches. it is a rectangular cardboard box with a sliding cardboard drawer. The box has a paper label with text reading, "BRYANT & MAY'S CROWN SAFETY MATCHES" and an image of a crown. The top and bottom side has a purple striking paper, to light match. Bottom and sides of sliding drawer are a green color.J.G.Ralstonmatchbox-holder smoking-accessories ralston-j.g.

Scythes were used to manually mow wheat or grass. Scythes were used with a long sweeping movement which made them much less tiring for labourers to use than reaping hooks or sickles though they still involved great physical labour and considerable skill to perfect. Both hands were in use and the operator did not have to bend his back to reach down to the crop. On farms scythes were sharpened on a sandstone wheel mounted on an axle with a crank handle on one side. This was hand powered and used with water. Scythes were not used as often on farms after the mechanisation of harvesting. They were still used for cutting awkward shaped small plots and for opening a path for the tractors. This item is an example of a tool used by the early settlers of the Orbost district. An iron scythe blade, curved and tapered. There is no handle and the blade is rusted and pitted."ROSE"scythe tool agriculture rural

Scythes were used with a long sweeping movement which made them much less tiring for labourers to use than reaping hooks or sickles though they still involved great physical labour and considerable skill to perfect. Both hands were in use and the operator did not have to bend his back to reach down to the crop. Scythes were not used as often on farms after the mechanisation of harvesting. They were still used for cutting awkward shaped small plots and for opening a path for the tractors. This item is an example of a tool used by the early settlers of the Orbost district.A curved iron blade with one sharp edge. It is attached to a curved hollow handle with two extensions on one side where the scythe can be held by two hands.scythe agriculture tool

Hand operated water pumps were used to supply water prior to the widespread use of windmill pumps, electric pumps and city water systems. Usually an old pump was made from cast iron, wood or tin. Pumps were very important to people up through the 19th century as farm houses seldom had indoor plumbing with running water. These pumps were also used for outdoor irrigation or laundry purposes.Hand operated water pumps were important before indoor plumbing was adequate. An iron water pump - hand-operated by a lever to the side. A plunger moves up and down (missing). It has a spout and has been painted brown.pump-water irrigation rural

This sword was collected by Norman Ladner in New Britain during WW11. It was returned to Australia in 1946. Lorraine Joiner (Norman Ladner's daughter) gave the sword to Orbost Police in 2010.Katana were one of the traditionally made Japanese swords that were worn by the samurai class of feudal Japan, also commonly referred to as a "samurai sword.A Japanese Army Samurai sword from WW11. It has a Katana style blade - a curved, slender, single-edged blade with a circular or squared guard and long grip to accommodate two hands.sword ww11 katana samurai japanesse-army weapon

This instrument was given to Allan White on 24.8.1935 by his grandfather. Allan White came to Orbost in 1946. He was firstly a share fvarmer on 3 farms then in business - saddler and bike shop with his brother Eric. Then withG.P. Motors as the RACV man. Allan was a "ham radio" operator and involved with Rotary, Rifle and Bowling clubs, also with the Presbyterian Church.A Mezon button accordion with a tan coloured canite carrying case. it has 3 bass valves and 10 treble valves.On front of case : MEZON Superior Manufacturer On accordion : MEZON accordion Made in Germany On end : steel reeds Hand engraved : 24.8.35 Corner pieces : MEZON Trade mark Made in Saxony musical-instrument button-accordion white-allan

These medallions were issued after the First World war to the next-of-kin of all British and Commonwealth(Empire) service personnel who were killed as a result of the war. The plaques were made of bronze aand hence popularly known as the "Dead Man's Penny". James Pullar Cameron was killed at Lone Pine during WW1. James Pullar Cameron (Service No 605) enlisted in the 8th Light Horse at Orbost on September 11, 1914 aged 23 years 5 months. His medical was done by Dr James Kerr. He was 6 ft 1 in tall, 11 st 6 lbs, of dark complexion with dark eyes and hair and a chest measurement of 34 ½ / 38 inches. After training, he embarked the Armadale on February 12, 1915. He was shot in the chest at the Dardanelles on May 29, 1915 and taken aboard the HT Neuralia for transfer to Malta. He was admitted to the military hospital ‘Cootenara’ and after 10 days treatment, he re-embarked for Gallipoli aboard the HMT Southland on June 14, 1915. He returned to duty at Gallipoli on June 20, 1915. On August 7, 1915 he was killed in action. His body was not recovered. His name is on the memorial at Lone Pine. His memorial plaque has a wide H and a number behind the back paw of the lion, indicating that this plaque was made at the Acton Factory, one of the later ones cast there.James Pullar Cameron was the son of Robert Cameron one of the earliest settlers on the Orbost flats. He was a trooper in the 8 Light Horse Regiment and died at Gallipoli on 7 August 1915.A bronze commemorative medallion in a wooden frame. The token has an image of Britannia holding trident and standing with a lion. The designer's initials E.Cr.P appear above the front paw. In her left outstretched hand she holds an oak wreath with the name James Pullar Cameron in a rectangle. His memorial plaque has a wide H and a number behind the back paw of the lion, indicating that this plaque was made at the Acton Factory, one of the later ones cast there.Around the picture- He died for freedom and honour.ww1 gallipoli cameron medallion military

Possibly used in the Orbost district. Railway lamps of this kind were hand signalling lamps used by train guards, shunters and sometimes signalmen and station staff. They could signal the locomotive crew at night to let them know what to do (move forward/move backward/right-of-way) when leaving a station, goods yard or siding. Railway lamps of this kind were significant railway items in their period of use as essential tools to the safe-working operations of the railway. Two railway signal lamps. These are kerosene burning lamps made of metal and painted red. Both lamps have carrying handles at the top. .1 has a green glass lens and .2 has a red glass lens. signals lamps communication railway transport kerosene-burning

This flag was used at the Slab Hut, the Visitor Information Centre in Orbost for various celebrations - possibly 20th birthday in 2007, and for Australia and Anzac Days.An Australian flag. It is made of polyester material. It has a blue field with the Union Jack in the upper left quarter and a large white seven-pointed star known as the Commonwealth Star in the lower left quarter. The right hand side contains a representation of the Southern Cross constellation, made up of five white stars – one small five-pointed star and four, larger, seven-pointed stars.Made in Taiwan 100% polyesterflag australian-flag

A wall phone used in the early 20th Century in Australia, this one in the Orbost district.A wall-mounted telephone with a handpiece connected by a cord to the left hand side of the main box. On the right hand side is a winder. Near the top of the box are two round silver gongs which make the ringing sound of the phone call. The box is mostly made of wood, with the front-bottom section with a metal facing which is able to be opened to reveal the mechanism behind (including the battery). The phone has a wooden writing slope attached to the front. On the front of the metal section of the box are the words L M ERICSSON & CO trade mark STOCKHOLM. L M ERICSSON & CO TRADE MARK STOCKHOLMtelephone-communication wall-phone

This was probably used by the Powell family. Selena Powell came from Eden to Orbost at the age of 18. She met and married Henry James Powell in Orbost.This item is an excellent local example of the type of hand made tea cosies which were used in an Australian domestic setting during the 1920's through to the 1960's. Fawn coloured hand-knitted tea cosy. The wool has been brushed to resemble the fur. It has brown button eyes and the nose and mouth are sewn in black yarn. The feet are embroidered in black and it has a narrow green velvet ribbon around the neck.tea-cosy domestic-item tableware handcraft knitting powell-selena

This uniform was worn by Barbara Varney in the 1960's.A yellow, short-sleeved, collared dress uniform worn by staff working at the Shire of Orbost. It has a zip front, two pockets and pleating detail on the sleeves and pocket. On the left hand side just below the collar the "Shire of Orbost" is embroidered in green. The dress is made of polyester/viscose.Tag at back of neck - Career Wear Neat 'n' Trim Neatoronuniform orbost-shire-council varney-barbara

The Batman Deed is sometimes called the Batman Treaty, the Dutigullar Deed, the Dutigullar Treaty or the Melbourne Deed. The deeds had been drafted by JT Gellibrand, a leading lawyer in the colony. Batman's Treaty was a document signed on 6 June 1835 by John Batman, an Australian grazier, businessman and explorer, and a group of Wurundjeri elders, for the purchase of land around Port Phillip, near the present site of the city of Melbourne. The document came to be known as Batman's Treaty and is considered significant as it was the first and only documented time when Europeans negotiated their presence and occupation of Aboriginal lands directly with the traditional owners. The so-called treaty was implicitly declared void on 26 August 1835 by the Governor of New South Wales, Richard Bourke. The original Batman Deed is of enormous significance to the history of the European settlement of Victoria. Framed print of the Batman Deed, dated 1835. This is a printed copy of the Batman Deed, made in 1966 from the 'original' by the State Library of Victoria. The frame is wood. The document consists of handwritten text in black ink with eight signatures in the lower right hand side and three signatures in the lower left hand corner. It has been signed by John Batman beneath the eight signatures.document batman-deed melbourne

Parrying shields have long been used within Aboriginal communities not only for protection, but as a symbolic implement used in rituals. Aboriginal men using very basic tools made them. They were designed to be mainly used in battle but were also used in ceremonies. Many shields have traditional designs or fluting on them whilst others are just smooth. The necessary tools and equipment for hunting, fishing and warfare were one of the very few items that Aboriginals carried with them from place to place. Most were used for a multiplicity of purposes. Because many were made from raw natural materials, such as wood, generally only partial remains are found today. This is a good example of a wooden Indigenous artefact from Eastern Australia.An Aboriginal shield of roughly carved wood. Has a square shaped hollowed out hand grip.

Inspected by Joanna Freslov, archaeologist 2/6/2008. Hunting boomerangs were used by the Australian Aboriginals, mainly for injuring or killing animals or enemies. Hunting boomerangs fly at high speed close to the ground and can easily kill a small animal or knock down a larger one. As well these boomerangs were used as hand-held weapons, as musical instruments and for sport. Some of the other uses were, religious ceremonies, digging, clearing fire sites, unearthing ants and lizards. Hunting boomerangs are normally made from the curving roots of trees. (ref. boomerangshack)The necessary tools and equipment for hunting, fishing and warfare were one of the very few items that Aboriginals carried with them from place to place. Most were used for a multiplicity of purposes. Because many were made from raw natural materials, such as wood, generally only partial remains are found today. this item is an example of a hunting boomerang used by early Indigenous people in the Northern Territory.A hand carved hooked boomerang of a deep red wood. Possibly used for fighting.boomerang aboriginal hunting weapon

Inspected by Joanna Freslov, archaeologist 2.6.2008. Ground-edged axes first appeared in south-eastern Australia about 4,000 years ago and were used either with handles or hand-held. Stone tools were used for a variety of purposes, in ways similar to those of steel knives, axes, hammers and chisels. Ground-edge tools are made from fracture-resistant stone, such as basalt. This is able to withstand repeated impact making it suitable for use in objects such as stone axes. The stone was quarried, and then roughly shaped into a tool blank with blows from a hammerstone. The edges were then sharpened and refined by grinding the tool against a coarse, gritty rock. The necessary tools and equipment for hunting, fishing and warfare were one of the very few items that Aboriginals carried with them from place to place. Most were used for a multiplicity of purposes. Because many were made from raw natural materials, such as wood, generally only partial remains are found today. This item is an example of a stone tool used by the early Indigenous people of Eastern australia.A handmade stone Aboriginal axe head.axe-head aboriginal tool stone-artefact

Inspected by Joanna Freslov, archaeologist 2.6.2008. -unusual axe head. Ground-edge tools are made from fracture-resistant stone, such as basalt. This axe would able to withstand repeated impact. The stone would have been dug or found and then roughly shaped into a tool blank with blows from a hammerstone. The edges were then sharpened and refined by grinding the tool against a coarse, gritty rock. Ground-edge tools could be held in the hand, or fashioned to be fixed onto a haft or handle.The necessary tools and equipment for hunting, fishing and warfare were one of the very few items that Aboriginals carried with them from place to place. Most were used for a multiplicity of purposes. Because many were made from raw natural materials, such as wood, generally only partial remains are found today. This stone axe head is an example of a ground-edge tool used by the early Indigenous people in Eastern Australia.A handmade stone Aboriginal axe head.aboriginal tool aboriginal stone-artefact

Inspected by Joanna Freslov, archaeologist 2.6.2008 Ground-edged axes first appeared in south-eastern Australia about 4,000 years ago and were used either with handles or hand-held. Stone tools were used for a variety of purposes, in ways similar to those of steel knives, axes, hammers and chisels. Ground-edge tools are made from fracture-resistant stone, such as basalt which is able to withstand repeated impact, and so is suitable for use in objects such as stone axes. The stone was quarried, and then roughly shaped into a tool blank with blows from a hammerstone. The edges were then sharpened and refined by grinding the tool against a coarse, gritty rockThe necessary tools and equipment for hunting, fishing and warfare were one of the very few items that Aboriginals carried with them from place to place. Most were used for a multiplicity of purposes. Because many were made from raw natural materials, such as wood, generally only partial remains are found today. This item is an example of an early axe head used by the Indigenous people of East Gippsland.A handmade stone Aboriginal axe head.aboriginal tool stone-artefact axe-head

Used for shaving before safety razors became popular in the 1950s. Made in Sheffield, England. Sharpened with a leather strop.Two cut-throat razors and their cases. One razor has a black handle, and the other has a white handle. The cases are made of cardboard.One razor has the words HAND FORGED BENGALL RAZOR MADE IN SHEFFIELD ENGLAND marked on the box. cut-throat-razor shaving-razor

This photograph depicts the third battle of Ypres (Battle of Passchendaele). Depicted is a trench battlefield that has been turned to mud. Two army tank vehicles have been buried in the mud of the trenches. A single soldier stands in the background surveying the battlefield.After mid-1917, and following mutinies in the over-strained French Army, the British Forces had to assume an even greater role in the war on the Western Front. For Field Marshal Sir Douglas Haig, the British commander-in-chief, this provided an opportunity to launch an offensive that he had long wanted. Attacking from Ypres in Belgium, he planned to drive the Germans from the surrounding dominant ridges and even hoped to reach the Belgian coast. Following on the success at Messines in June, he unleashed his great attack on 31 July 1917. Fighting went on, often in appalling weather and despite crippling losses, until November. Finally, with the army stuck in muddy fields churned up by the artillery fire, the bloody offensive came to an untidy close. Many would afterwards call this offensive, actually a series of battles, after the name of the village that had become the last objective – 'Passchendaele'. In the Battle off Passchendaele, the 1st, 2nd and 3rd Australian Divisions captured Broodseinde Ridge on 4 October 1917. It was a vital victory. But, then it began to rain. Five days later the 2nd Australian Division suffered heavily in a further attack in the mud. Finally, on 12 October, another attack, involving the 3rd Division assisted by the 4th, was made against the village of Passchendaele atop the main ridge. In the face of heavy fire, the men fought in the mire while struggling to keep up with their artillery barrages. Ground was taken but it could not be held. In wretched conditions, with casualties mounting at an appalling rate, the Australians had to fall back. The troops were finally exhausted and could do no more; by 15 November they handed over to the Canadians.Black and white rectangular reproduced photograph printed on mate photographic paperReverse: 6523/ (A copyright and reproduction notice from the Australian War Museum, printed upside-down in blue ink)/military album, burke museum, beechworth, military vehicle, trenches, trench warfare, wwi, world war one, world war 1, ypres, belgium

This large, leather bound journal was made for the Public Library and Burke Museum in Beechworth by book manufacturer, William Detmold in 1875. It was commissioned by the President of the Library and Burke Museum committee, Dr Antoine Mousse, for the purpose of cataloguing all the items in the collection. The cataloguer was the curator at that time, William Morton, whose hand-writing appears in the journal today. When William Morton first started recording in this journal in 1875, there were already a number of existing items in the institution. The Public Library and Burke Museum in Beechworth had actually been operating since the 1850s; first as a Young Men’s Association in 1856, then as Beechworth Athenaeum in 1858, then as the Beechworth Public Library in 1860. Then in 1861 when news of the death of Beechworth’s former police superintended, Robert O’Hara Burke, reached the town, it was agreed that the Public Library would also become a museum to tribute his legacy, renaming it as the ‘Public Library and Robert O’Hara Burke Memorial Museum, Beechworth’. Many of the items from the early institutions would have been used to form the nucleus of this new organisation. Plus, the additional items that were either collected or donated to develop it into a museum. The catalogue is extensive. There are exactly 461 pages of recorded items, each page detailing the various collections the museum acquired in the late 19th century. Collections recorded in this catalogue include a large collection of geological specimens, that were given to the museum in 1868 by the Geological Survey Department of Victoria. A large collection of taxidermy mounts, that were given to the museum as skins by the Museum of Australia in 1865. An extensive collection of Aboriginal artefacts that were purchased from amateur anthropologist R. E . Johns in 1868. As well as artworks, charts, photographs, machinery, maps etc., all of which have been held in the museum since. This catalogue also details the governance and management of the organisation. There were originally 30 rules that governed the actions for the management committee and, while anyone could read in the free library, only subscribers could borrow two books and one periodical. At first, subscriptions rates were 7/6 a quarter. This was later changed to £1 per annum, paid quarterly in advance. This was a considerable amount; 7/6 per quarter meant that the annual fee was £1.10. This was equivalent to about £650.00 or about $1,182.00AUD today, while the reduced subscription fee of £1 a year was the equivalent to £450.00 or about $818.00AUD today. Membership of the athenaeum would have been the reserve of the town's notable citizens. The vale of the catalogue lies not only in its historical connect with the establishment of the Athenaeum and the current museum, but also in its record of the names and positions of all members of the institution's committees of management from 1875-1876. This is a unique object that contains important records for a notable country town. Large brown leather bound book made in 1875 for the Beechworth library and museum by William Detmond. Inside is a comprehensive and detailed itemised listing of the paintings, drawings, charts, photographs, specimens and books that entered the institution from 1850 -1882. non-fictionCover: RULES / CATALOGUE OF BOOKS / INVENTORY OF PICTURES, DRAWINGS, / MAPS, CHARTS, FURNITURE, SPECIMENS / OF THE / PUBLIC LIBRARY AND BURKE MUSEUM / BEECHWORTHburke museum, beechworth, catalogue, museum catalogue, 1875, william morton, william detmold, exposition universelle, ferdinand von mueller, public library, collection, book, leather bound, restored, digitised, robert o'hara burke, hand-written

Trowel was presented to Captain Spark by honourable secretary Mr Charles Dyte on 1/1/1864 to lay the foundation stone of the watchtower and belfrey of the Ballarat fire station. Trowel was made by Mr. Bennett of Bridge street and fashioned on the trowel used by Mr. Fraser M.L.C. when laying the foundation stone of the St. Kilda town hallhand engraved sterling silver ceremonial trowel. engraving is floral design on blade. handle is hollow, octaganol with leaf pattern and greek meander patternHallmarked on underside - emu, "WE" (letters), kangarooballarat fire brigade, captain, foundation stone, trowel, colonial silversmith, silver trowel, captain spark, honourable secretary, mr bennet, sterling silver, charles dyte, dyte, spark, 1864, watchtower and belfrey, tower, watchtower, belfrey