Showing 877 items
matching metalcraft-aluminium
-
Bendigo Military Museum
Badge - BADGE RAS, post WWI
The badge belonged to brothers, either Thomas Robert Jones No 1982 AIF or Edwin James Jones No 3511 AIF. Refer 1367.5 and 1377 for their service history.Brass badge, round with crown above. Centre has a Rising Sun with "AIF" underneath. Around the outside is "Issued by Dept of Defence-Returned from Active Service." Reverse has 2 lugs for attaching to clothing."18819 Amor Sydney"numismatics-badges, military history-army, metalcraft-brassware, ras, jones -
Bendigo Military Museum
Badge - BADGE SASC, 1914-18
Item souvenired by Edwin James Jones No 3511 AIF. Refer 1367.5 for his service history.BADGE, Brass with the letters " SASC”, Lugs on rear with one pinnumismatics - badges, military history - army, metalcraft - brassware, jones -
Bendigo Military Museum
Badge - ASSOCIATION BADGES, post WWI
The top Association badge is 46th Batt AIF. The bottom badge appears to be 14th Batt AIF. When the AIF was doubled in Egypt in 1916 the 14th Batt was split to form the 46th Batt. Badges were in the collection of Edwin James Jones No 3511 AIF. refer 1367.5 for his service history..1) Brass civilian badge with yellow and blue enamelled face and pin attachment on rear. 46th Batt AIF. .2) Brass civilian wishbone shaped badge with yellow and blue enamelled rectangular section and attachment pin on rear.societies-service clubs, metalcraft-brassware, unit association, jones -
Bendigo Military Museum
Badge - BADGE 46TH BN, 1916-1918
The badge belonged to Edwin James Jones No 3511, 46th Batt AIF. Refer 1367.5 for his service history.Brass badge, number 46. Clips and pins on rear for attaching to clothing.military history, numismatics-badges, metalcraft-brassware, 46 bn, jones -
Bendigo Military Museum
Weapon - CARTRIDGES, 1914-1918
Items souvenired by Edwin James Jones No 3511 AIF. Refer 1367.5 for his service history.Collection of cartridges. .1) Cartridge and projectile, brass case, rimless. .2) Cartridge and projectile, brass case, rimmed, 7mm .3) Cartridge and projectile, brass case, rimmed, lead bullet, 6mm .4) Cartridge and projectile, brass case, rimmed, lead bullet, .32 cal. .5) Cartridge and projectile, brass case, rimless, .320 cal..1) “12.15, 567, S" .2) “V15, VII" .3) "RACO, WCF, 25.20" .4) “WRACO, .32 S&W" .5) "11,16,5"arms-ammunition, metalcraft-brassware, cartridge, projectile, jones -
Bendigo Military Museum
Uniform - BUTTON & COLOUR PATCH, 1914 -18
The colour patch is 2nd Battalion Canterbury Infantry Regiment New Zealand Military Forces. They belonged to Harry Thompson who came from Sebastion near Bendigo and enlisted in New Zealand. Refer 323.3, 1258, 2027..1) Button, metal, round with 4 stars in the centre with "New Zealand Forces" around the outside. .2) Canterbury Regiment colour patch, felt material, square shaped black backing with central diamond shape, dark blue over red.uniforms-military-accessories, metalcraft-brassware, manchester-trimmings -
Bendigo Military Museum
weapon - SHRAPNEL WW1, C, WW1
Item souvenired by H. B. FIELD No. 7596, 13th Batt. A.I.F. Refer Cat No 890P for his service records.Rough shaped piece of metal shrapnel with slightly grooved surface.military history - army, metalcraft - iron, shrapnel -
Bendigo Military Museum
Award - MEDAL SET
B.G Cooper, refer 1722P Medal set, court mounted, set of (2) re B.G Cooper. 1. Australian Active Service Medal 1945-75, has 2 bars with text "Thai-Malay" and "Malaya". 2. General Service Medal 1918-1962 with bar "Malaya""3/410591 B.G Cooper"numismatics-medals, military, metalcraft -
Bendigo Military Museum
Award - MEDAL SET, post WWI
Albert Ernest Boase enlisted in C Coy 22nd Batt AIF on 15.5.15 as Quarter Master Sergeant age 25 years. He embarked for Suez. He was hospitalised on 12.7.15 and diagnosed with Valvular Disease of the heart. He was discharged from the AIF on 21.10.15 medically unfit. Medal set, court mounted. Set of (3) re A.E Boase. 1. 1914-15 Star. 2. War Medal 1914-19. Replica not engraved. 3. Victory Medal. Replica not engraved..1 "559 Pte A.E. Boase 22/BN A.I.F"metalcraft, medals, military -
Federation University Historical Collection
Photograph - Metalcraft, Jessie Muir, Pierced Copper Bowl
The Ballarat Technical Art School was a division of the Ballarat School of Mines. Jessie Muir attended the Ballarat Technical Art School in <1927>. Her father ran Greenfields and she married Will Coates.jessie muir, jessie coates, metalcraft, ballarat technical art school -
Bendigo Military Museum
Award - MEDAL SET AND NAME BADGE, Post WW2
.1) The first medal on the left is the BEM. There are 9 clasps denoting overseas service and 3 clasps denoting Long Service. Francis William (Dinky) Dean enlisted in the 2nd AIF No VX93960 on 16.12.43 age 18 years. He went on to serve with the 2nd/2nd Pioneers in the islands ending up on Morotai at wars end. At the end of 1945 while still overseas 3 new Battalions were formed for service wth BCOF in Japan. They were the 65th, 66th and 67th Bn’s made up from 3 Aust Divisions 6th, 7th and 9th. Frank was one of the first to sign up in the 65th Bn with same Regt No. They moved to Japan in early 1946. While still in Japan in 1947 there was a period called the Interim Army while the 65th, 66th and 67th Bn’s were designated 1st, 2nd and 3rd Bn’s R.A.R, Aust Regular Army. His Regt No changed to 3742 and the 65th became the 1st Batt of the R.A.R. He then served with 1 RAR in Korea 7.4.52 to 28.2.53, 3.3.54 to 24.3.56. Malaya during the Emergency/ Confrontation Oct 1959 to Oct 1961. Vietnam 1.6.65 to 7.6. 66, 18.3.68 to 11.2.69. Malaya 1969-70. Frank was discharged from the Army on 19.12.1975 with the rank of Quarter Master Sergeant with a total of 32 years service. He was the longest serving member of 1 RAR, he had a final posting to RMC prior to discharge. BEM (British Empire Medal) For service in Korea. BCOF (British Commonwealth Occupation Force Japan) RAR ( Royal Australian Regiment) RMC (Royal Military College Duntroon) In 2004 Frank was the guest of honour at the new Coral Lines Lavarack Barracks Townsville, a street was named “Dean drive” after him. Frank passed away on 11.2.2005 age 79 years. .1) Medal set, miniatures, brass plate mounted, set of (16) re F.W Dean BEM. .2) Name badge - battalion badge for unit associations. Black plastic backing with pin, black name on gold background. .2) "Frank Dean 1RAR"numismatics, medals, military, badges, metalcraft -
Bendigo Military Museum
Accessory - BROOCH, c.1945
Brooch sent home by Roy Hilton Taylor NX94268, enlisted 2.4.1942, age 29 years. On discharge from the 2nd AIF on 17.1.1946 he was a Gunner in 2/1st Field Regt. Blue heart shaped brooch with pin clasp. Island scene in black.On front of brooch in gold: Edna & below a shining sun On rear of brooch: Love from Roy On pin clasp: New Guinea 1945metalcraft, costume accessories - jewellery -
Bendigo Military Museum
Accessory - LOCKET, Handley, c.WWII
Gold locket with grapes & vines on front, containing photograph of man in an Air Force uniform with helmet in hand.Stamped on the back: “HANDLEY 1-109CT, GOLD FILLED”costume accessories - jewellery, photography-photographs, metalcraft-gold -
Bendigo Military Museum
Accessory - CIGARETTE LIGHTER, C. 1939 - 45
Items given out to service personal by the Society.Cigarette lighter, brass, cylinder shape, two piece, has stamped details onOn the top section, “Australian Red Cross Society”metalcraft, cigarette lighters, red cross -
Bendigo Military Museum
Container - CASHBOX, Post 1950
Metal cashbox, hinged on one side, green colour with key lock.containers, metalcraft, security, commerce -
Bendigo Military Museum
Weapon - AERIAL BOMB, C.1939 - 45
Possibly Japanese, brass, screw on section with 4 fins on one end, Japanese figures and English numerical numbers stamped on. (see attached sheet with cataloguing worksheet).Numbers stamped on, “804”arms - ammunition - weapons - japan, metalcraft - brassware -
Bendigo Military Museum
Headwear - HELMET
Helmet, khaki colour, steel, black plastic head insert with black adjustable cord. Black rubber cushioning attached inside top of helmet, khaki webbing chin strap with elastic adjustable sides.uniforms - headwear, metalcraft - steel, costume accessories -
Bendigo Military Museum
Accessory - NAVAL ITEMS, JAPANESE, pre 1939
.1) Band, black ribbon, Japanese characters on woven gold mid section and gold anchor each end .2) brass coloured metal badge with flower centered on anchor surrounded by twisted metal oval. .3) Gold coloured metal alloy badge, leves with flower at top, possibly laurel .4) Japanese torpedo spanner. From Rabual, New Britain.military history - navy - japan, numismatics - badges - navy, tools, metalcraft -
Phillip Island and District Historical Society Inc.
Cheese Dish, 1900's approximate
Silver Cheese Dish belonging to Mrs Jack Jansson of Rhyll.Silver Cheese Dishlocal history, metalcraft, sterling silver, silver cheese dish, mrs jack jansson, rhyll, phillip island -
Phillip Island and District Historical Society Inc.
Coffee Pot, ?
Pewter Coffee Potlocal history, metalcraft, pewterware, domestic items, food & drink consumption, pewter coffee pot, coffee pot -
Glenelg Shire Council Cultural Collection
Accessory - Cloth Badge, n.d
Two cloth badges, white, rectangular, blue Alcoa logo, 'ALCOA' in blue, beneath logo.aluminium smelter, alcoa, portland, advertising -
Kiewa Valley Historical Society
Book - Reference Printing, Charles W. Hackleman, Commercial Engraving and Printing, Circa 1921
This item relates to methods of reproducing photos on all forms of material in an era of physical offset printing.The offset method is being replaced by digital transfer direct to the final product,(paper or other porous and non porous surfaces). Newspapers and other "paper" information publications are still producing "hard copies" but these are slowly being phased out. This item was used Circa 1920s in the peek period of paper based media. From the 1940s radio and then television stepped into the mass media revolution.This book was produced when all printing, Government and private enterprise, was using the "off set" method. This method was used to a great degree in all schools within the Kiewa Valley. It was in an era before "photo-copying machines" were available. This was a period when printing inks for larger printing machines had to be purchased from specialised outlets and printing presses required to be washed after each "run" of printing before the next plate(aluminium) could be fastened onto the "off sett" machinery. Heat infusion now used in large machines and domestic printers has superseded this task. Faded green cloth covered book with green papered front and back sleeve pages.Photos and sketches are throughout the book. Gloss paper used from page 1 one to page 400. Pages 401 to page 432 are not gloss paper. The type of paper varies throughout the book until final advertisement and index pages, from page 833 to page 846, are on gloss paperThe spine cover is badly worn and wording is faded. Front cover has"Commercial Engraving And Printing" Author and publisher details written by Charles W. Hackleman. Published by Commercial Engraving Publishing Company, "A Manual of Practical Instruction and Reference Covering" Commercial Illustrating and Printing by all Processes.technical book, reference for engraving and printing -
Federation University Historical Collection
Newspaper, The Machinery Market, 02/12/1889
It's assumed that this journal was read at the Ballarat School of MinesA small illustrated journal with advertisements and pictures. pages 328-356 (and 26 pages of illustrated advertisements). Illustrations include machinery, corn crushers, condensers, chlorination plants. stea, hammers, steam engines, steam pumps, lamps, saw bench, leather belting, casks, barrels, machinery, boiler, cohran and co, birkenhead, stern, cowles syndicate company, electric smelting works, aluminium manufacturing, w t glover and co, rope machine, steam travelling crane, webster wood fibre machine, automatic govenor expansion gear, international exhibition edinburgh, beacon light, air propeller, well boring tools and pumps, cochran and co.'s launch, tug and boat building yard, s.s. jeanette, cochran boiler, cochran and co's boiler shop, stern wheel steamer, s.s. esperanca, cowles syndicate co, milton, w.t. glover & co.'s patent compound rope making machine, bendh drilling machine, steam launch, bicycle, well-boring tools -
Federation University Historical Collection
Metalcraft, Planished Copper Basket
This work was most probably made by Keith Rash at the Ballarat Junior Technical School.Keith became a well-known Ballarat signwriter and amateur historian. Planished copper basket (flat base) with double rivetted handleScratched into base 'K.E. Rash"keith rash, metalwork, basket, ballarat junior technical school -
Flagstaff Hill Maritime Museum and Village
Container - Tin, C. 1910 - 1930
This Kandy Koola Tea tin dates to the early 20th century and was made and sold in Melbourne, Victoria. It once belonged to the Giles family. About Kandy Koola Kandy Koola ran an advertisement in the West Gippsland Gazette on 2 May 1911 promoting its tea as perfect for a picnic. The text reads “Picnicing. All as hungry as hunters – made a fire of small twigs – put on our billy of fresh spring water – and waited. Soon bubble, bubble, bubble and the billy boiled. In goes the pure Kandy-Koola Tea. Tea! Tea is not the word – it tasted like nectar! One cup, two cups, three cups – then had to make a fresh billy full. Lazed away the rest of the day sipping our Kandy Koola and chatting. How good indeed! “All grocers sell Kandy Koola Tea. It is pure leaf, selected and blended with the greatest care and skill. Ask your grocer for Kandy Koola. Sold in three grades, i.e. red, blue and green packets” About the Giles Family There are many 19th century items of furniture, linen and crockery donated to Flagstaff Hill Maritime Village by Vera and Aurelin Giles. The items are associated with the Giles Family and are known as the “Giles Collection”. These items mostly came from the simple home of Vera’s parents-in-law, Henry Giles and his wife Mary Jane (nee Freckleton), whose photos are in the parlour. They married in 1880. Henry Giles was born at Tower Hill in 1858. He was a labourer on the construction of the Breakwater before leaving in 1895 to build bridges in N.S.W. for about seven years. Mary Jane was born in 1860 at Cooramook. She attended Mailor’s Flat State School where she was also a student teacher before, as family legend has it, she became a governess at “Injemiara” where her grandfather, Francis Freckleton, once owned land. Henry and Mary’s family of six, some of whom were born at Mailor’s Flat and later children at Wangoom, lived with their parents at Wangoom and Purnim west, where Henry died in 1933 and Mary Jane in 1940. The Giles family collection has social significance at a local level, because it illustrates the level of material support the Warrnambool community gave to Flagstaff Hill when the Museum was established. The tin and the tea that was in the container are significant for their association with the Australian and Victorian food industry, being blended and packed by John Connell and Co, Proprietary Limited Melbourne.Container; tin, for Kandy Koola Tea, part of the Giles Collection. Round tin, green background, gold band on top and bottom, printed on gold background. Ceylon flavoured tea. Also five gold flowers of various sizes with scalloped band, large golden inscription “Kandy Koola Tea” and “Ceylon Flavoured” and “Blended and packed by John Connell & Co Pty Ltd Melbourne” “Kandy Koola Tea” and “Ceylon Flavoured”and and “Blended and packed by John Connell & Co Pty Ltd Melbourne”. Printed on lower band “MADE AND PRINTED BY WILSON BROS. NORTH MELB.” “1LBS NETT”flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, giles family, 19th century domestic items, tea, tea merchant, tea tin, food and beverages, giles collection, henry giles, tower hill, warrnambool breakwater, mailor’s flat, wangoom, 19th century household goods, metalcraft, tinware, kandy koola tea -
Federation University Historical Collection
Craft - Object, Planished Brass Bowl
Thought to be made at the Ballarat Junior Technical School.A planished brass bowl with a turned and planished base soldered together, then soldered onto the bowl.ballarat junior technical school, metalwork, bowl, metalcraft -
Federation University Historical Collection
Book, B.T. Batesford, Handcraft in Wood and Metal, c1913
Green/brown hard covered book of 240 pages.handcraft, woodcraft, metalcraft, models, ballarat technical art school library, library catalogue cards and date stamps, tools, metalwork, lettering, design -
Australian Gliding Museum
Machine - Glider - Sailplane, 1974
The Pilatus B4 is an all metal intermediate sailplane meeting Standard Class rules that was designed in 1966 by Ingo Herbst, Manfred Küppers and Rudolf Reinke. It did not immediately go into production. In 1972 Pilatus Aircraft of Switzerland acquired a licence to build the aircraft and began production. The PCII and PCIIA versions were semi-aerobatic. The PC11AF released in 1975 was rated as fully aerobatic. By 1980, when Pilatus sold the rights to manufacture of the aircraft to Nippi Aircraft of Japan, 322 of the Pilatus B4 had been produced. Nippi Aircraft built a further 13 and also one two seat version. The Pilatus B4 proved popular in Australia with 26 appearing on the Australian register. The Museum’s example is a basic semi-aerobatic type (Serial Number 092) that was built in 1974. It is registered as VH-GID on 8 July 1974 by H.G. Sutton of Mandura, Western Australia and flown out of the Narrogin Gliding Club in Western Australia until September 1986 when it was sold to the Albury – Corowa Gliding Club, New South Wales. In 1999 it was acquired by Michael Green and moved to Townsville, Queensland. The aircraft changed ownership again in 2004 and fell out of use for nearly 4 years. By then it had recorded 4377 hours in the air from 4304 flights. It returned to service briefly in January 2008 (5 flights totalling about 5 hours). It was donated to the Museum by David Millward of the Geelong Gliding Club, Victoria, on 10 April 2017. The aircraft is representative of a popular imported 1970s intermediate single seat sailplane design of aluminium alloy construction.Single seat sailplane of metal alloy constructionWhite colour scheme with yellow fuselage underside highlighted by blue stripe – “Pilatus B4” in black lettering on starboard side of cockpit – black anti-glare paint on the fuselage nose – Registration “GID” on the underside of port wing.australian gliding, glider, sailplane, pilatus b4, sutton, narrogin, albury, corowa, green, townsville, millward, geelong -
Moorabbin Air Museum
Manual (item) - Rotol Aluminium Alloy Propellor Blades Repair Manual Publication Number 830 Series .01 Reference 5796
-
Tatura Irrigation & Wartime Camps Museum
Functional object - Key, Reilly's Flour Mill Key
This key opened the door to Reilly's Flour Mill Tatura. 1880 - 1965. It was found in the home of Mr James Reilly (now this Museum) after his death.Very large key used at Reilly's Flour Mill, mounted on wooden block.reilly's flour mill, door key, metalcraft, antique key, james reilly