Used at Sunbury Asylum where two red buckets were placed in each ward, one filled with sand and one filled with sawdust, this was thought to have been encase of a fire breaking out. Sunbury Asylum closed in 1992 and became Victoria University of Technology.Red painted metal buckets with wire handles, one has wooden hand support. White writing stencilled on sides."Carpenter"sunbury asylum, george evans collection

Pleasant Creek Hospital Time Capsule. Glass Time Capsule bottles with wire seal. Later Stawell District Hospitalstawell

Colour Photgraph showing a large group of people looking at Magdala Mine Shaft, which is surrounded by a tall wire fence.heritage week, magdala mine

Circular net sugar bowl cover. Wire frame. Blue crocheted netting holding crystal, blue and white beadsdomestic items, crockery

Metal wire strainer. Round cylinder with hole in centre attached to a long shaft. Three sided metal piece attached.rural industry, fencing

The Lowen family home at East Burwood, shown in about 1925, was removed and the property sold to allow Blackburn Road to continue through to meet up with Burwood Road. (Now Burwood Highway)Black and white photograph of a weatherboard house with a post and wire fence along the drive, and woman standing near the side of the houselowen family houses east burwood

The stone wall is part of the terraces that were built into the hillside at the winery at Goonawarra. They were constructed in the early days when the vineyard was established to terrace the hillside for growing vines. The winery was originally established by Joh Goodall Francis, a former member of the Victorian Legislative Assembly. He acquired a parcel of crown land and proceeded to develop it as a vineyard. The terraces were built by vignerons, who were employed to work on the property. Goonawarra Winery was one of a number of vineyards that were established in the Sunbury area in the 1800s. The volcanic soil and temperate climate were ideal for grape growing.A coloured photograph of a stone wall with a notice to the left of the wall and long dried grassland in the front. A barbed wire fence is in the foreground.terraces, vineyards, goonawarra, james goodall francis

Photo and caption of the 1st of 30 trolley buses for Launceston built in Adelaide being driven to wharf for loading under the wires."Mail 4-3-50"trams, tramways, launceston, trolley buses, adelaide

This has been a home/surgery for a number of general practitioners. Dr Hedley Francis Summons is listed on the 1931 and 1936 electoral roll as resident / practising here. He was born in Kew in 1899 (died in 1967) and married Elsie Florence Finlayson in 1925. They had a son and daughter. In 1937 the family returned to Melbourne from Edinburgh. He became Lt Colonel of the 2nd 9th Field Ambulance, 2nd AIF in WW2. He was taken POW on the fall of Singapore and there is a portrait of him by Murray Griffin done in Changi. Dr Lorimer Grant Morton (1904-1989) graduated in 1931 and was registered at 627 Whitehorse Road in that year until c1937. Dr Alan Herbert McNaughton graduated in 1932 and was the general practitioner during the WW2. He is listed at the address in the 1942 and 1943 electoral roll. He married Nancy Winifred Bottomley in 1940. Dr Jack Ramsay Collie (1914-1990) was a general practitioner at 627 Whitehorse Road from c1954-1980. He served in RAN in WW2; married Mary Sewell Graham in 1945 and had a son and a daughter. 627 Whitehorse Road probably ceased as a medical practice after his retirement. Sale history: Sold in November 2007 by Marshall White Real Estate for $1.455M Sold in September 2011 by Jellis Craig real Estate for $1.75MThe house is significant as an example of past practice of general practitioners having their surgeries as part of their home. This example is from a later date than the Surrey Hills Medical Centre (SHMC) at 174 Union Road, which was purpose-built for Dr James Landells Blakie in c1911. In this case the building has reverted to domestic use, whereas in the case of SHMC its use became solely medical.A coloured photograph of a house with an established garden and a wire fence along the front. A tall gum tree stands in front of the house.surrey hills, whitehorse road, doctors, dr hedley francis summons, dr jack ramsay collie, (miss) mary sewell graham, (mrs) mary sewell collie, dr donald malcolm collie, (miss) elsie florence finlayson, (mrs) elsie florence summons, dr alan herbert mcnaughton, (mrs) nancy winifred mcnaughton, dr lorimer grant morton

A framed certificate that acknowledges that Melbourne Legacy was a member of The Australian National Flag Association (ANFA) in 1984. The ANFA is an association that promotes and defends the use of the flag of Australia.A record that the ANFA recognised Legacy's work as a positive contribution to preserving the Australian Flag.Glass, black wooden frame, mottled off white paper, picture wire, white tape and compressed timber backing. Top centre:- The Australian Flag. Centre:- The Australian National Flag Association, Victorian Division This is to certify that The Legacy Club of Melbourne is a Corporate member of The Australian National Flag Association, Victorian Division Bottom:- Date 6th June 1984. signed Bruce Ruxton Chairman. A. Harnel.Hon Secretary australian flag, membership

Brown Bakelite and metal hearing aid for church pews. Fabric covered wires with metal plug at end to plug into pew.

Given to George Eckert by his friend Felix Gutmann who came to Australia on the Dunera and spent most of the war at Tatura and was on the Board of Lecturers of Collegium Taturense.Blue and white sketch of Waranga Basin. Inside a circle of barbed wire is an owl and a galah. In a light coloured wooden frame. 1942 Wishing You a Happy New Year Collegium Taturense No IV Internment campgeorge eckert, felix gutman

A book of maps of region 16 for use by the CFA in bushfires Clear Plastic cover with wire spiral binding, over pruple paper with CFA Logo and White Stripes in the lower halfRegion 16 Rural Directory Second Edition 1992 Published by The Country Fire Authority Mapping Association INc. Sold by Country Fore Authority Regio 16 Headquarters 390 Barkly Street Ararat 3377stawell map

Order of proceedings, with names of School Captains, Prefects, House Captains, and SRC representatives.Special Guests - Mayor and Mayoress of Ringwood, Cr. J. Caffyn and Mrs. Caffyn, General Manager, Eastern Metropolital Region, Mr. Peter Cutter, President of School Council, Mr. Max Williams.

Thompson and Co. were a large foundry and engineering works in Castlemaine, Victoria.Fifty six page, soft brown covered booklet including methods of dredging and a catalogue of various pumps. Illustrations include: Thompson's Head Office: Natual Head Method; Pontoon Plant method; floating pontoon suction cutter method and pontoon plant method.thompson's foundry, dredging, gold, tin, thompson and co, castlemaine, engineering, foundry, pontoon, pump

The ship was built in 1953 by Ferguson Shipbuilders of Port Glasgow, Scotland for the Port Phillip Sea Pilots organisation (Melbourne)as a pilot cutter. The ship was launched in 16th April 1953 and more information is required on the bell specifically. A large, heavy brass ships bell. This bell is missing it's rope and ringer. The bell is tarnished in keeping with it's age. A broad lip around the bottom. - Engraving on front face of bell. - T.S.M.V / WYUNA / 1953. - Post manufacture engraving on the bell hanger -PWC 2364

The ship was built in 1953 by Ferguson Shipbuilders of Port Glasgow, Scotland for the Port Phillip Sea Pilots organisation (Melbourne)as a pilot cutter. The ship was launched in 16th April 1953 and more information is required on the bell specifically.Brass bell with brass ringer and macrame plaited clapper. Smooth cast top and bottom and rough cast in between. The rough cast hanger is on the top.The inscription on the rough cast is "Brisbane Trader/Melbourne/1969. bell, ship

Photograph of official launch of 'City of Ballarat' tram, 671 by the BTM on 4-12-1995. Photo appeared on page 21 of Feb. 1996 issue of Trolley Wire. See Trolley Wire caption for details of people in photograph. See also Reg item 4065.1 > 4065.3 for other photos of the same event.On rear in blue and black in, '15 4.12.95' and 'Photo page 21, same size' and cropping markingsballarat, 671, city of ballarat, btm, tram 671

This example of a sailing ship’s ‘dead-eye’ is from the wreck of the LOCH ARD, which sank near Port Campbell in 1878. The vessel was an iron hulled clipper ship constructed for the Loch Line in 1873. It was part of a fleet of similar merchant ships owned by that company, which specialised in bringing passengers and goods from London via the Great Circle route to Melbourne, and returning to Britain via Cape Horn with the colony’s wool clip. Deadeyes were a common feature of sailing ship technology in the nineteenth century. They were a simple, cheap, and hard-wearing device that, in conjunction with another deadeye, provided an effective means of levering, or tightening, attached ropes and stays. Lower deadeyes were fixed to the sides of the ship by an encircling metal collar (inset in a flattish groove chiselled around the outer circumference of the disc), which was bolted to iron bars attached to the hull (called chain-plates). Upper deadeyes were looped by a strong hemp or wire rope (inset in a rounded groove carved around the outer circumference of the disc), which was joined to the bottom ends of the rigging which reached up to secure the masts into position (called shrouds or stays). Connecting a Lower deadeye to its corresponding Upper deadeye was a rope (called a lanyard) which looped up and down through the three “eyes” of each disc, to form a pulley system. The hitching of the two deadeyes with a looped lanyard provided the means of tightening, or loosening, the tension on the mast rigging ― essentially by pulling against the chain-plates bolted to the outside of the hull. It was a procedure that could be performed by sailors at sea and in emergencies. For example, after a gale the stays may have stretched and the masts worked loose, requiring retightening. Or, in the extreme circumstance of shipwreck, the lanyards might need to be released on the weather side, so that the masts fall away from the stricken vessel. The shipwreck of the LOCH ARD is of State significance. Victorian Heritage Register S417.A well-preserved ship’s deadeye with wire loop rope still attached. The original tar coating for water-proofing still remains, colouring the entire artefact black. It is wrapped in hessian cloth and hemp cord and is currently in storage under secure and stable conditions. This deadeye was recovered from the wreck of the LOCH ARD. The artefact is a typical deadeye, comprising a thick round wooden disc, pierced by 3 similarly sized and shaped holes from one flat side through to the other, in a triangle formation. The survival of the wire cable loop-rope suggests it was an Upper Deadeye, connected to the shrouds (mast rigging). Previous number PWO 2388.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, deadeye, loch ard, rigging

Radio Telephone was minuted during the war. it was approved in 1944 for the State Electricity Commission of Victoria's use only. it was completed by the end of 1946. used by the State Electricity Commission of Victoria at Bogong during the construction of the Kiewa Hydro Electric Scheme to connect with head office in Melbourne. It allows one conversation at a time using traffic controls in an unusual system of radio telephone providing communication. At the time it was unique in Australia and installed by the S.E.C.V. technicians. It provided unattended shortwave radio link between two ordinary telephone switchboards, connecting any of the S.E.C.V.'s internal lines with the telephone system at Bogong and the construction camps beyond. From Bogong, radio phones connected to the outpost stations on the High Plains far above the snow-line. In operation, the service was similar to a normal telephone system but dispensed with the physical connection of wires and poles between the main terminals.Historical: This headphone set superseded headphones with two earpieces and those without a microphone. This one may have been used by operators on the switchboard at Bogong or Mt Beauty or one of the construction camps on the Kiewa Hydro Electric Scheme. The S.E.C.V. installed this unique system of communication to operate their branches especially at Bogong and beyond where the distance was great and often limited by the terrain and weather.Radio Telephone for SECV switchboard. Black plastic earpiece with microphone. Ear side circular with inscription on outer side then formed into elongated shape narrowing to the curved speaker piece at the narrow end. On top of the narrow end a long rubber cord is attached to a thick brass pin. On top of the wider end a thin stiff wire is attached to curve around the head to a blank rubber earpiece. This head piece has a piece of rectangular rubber attached at the top for comfort.'4408A IW61 / 1'radio telephone, ear phones, head phones. head set. communications, state electricity commission of victoria. kiewa hydro electric scheme. bogong. switchboards

Wire Cable found underground when mine workings re-opened 1982-1983Colour Photograph of underground mine shaft containing relics used in miningstawell

Wire Cable found underground when mine workings re-opened 1982-1983Colour Photograph of underground mine shaft containing relics used in miningstawell

Wire Cable found underground when mine workings re-opened 1982-1983Colour Photograph of underground mine shaft containing relics used in miningstawell

Gives the design details of the device or fitting known as a trolley wire ears that holds a tramway copper trolley wire in position. Notes that the drawing was traced in 1924 from a MMTB drawing. Has details for a splicing ear, straight line ear. feeder ear and curve ear along with details for nuts and screws.Yields information about the design of four different types of trolley wire fittings and how they were fabricated for use on the two tram lines, or electric street railways operated by the Victorian Railways.Dyeline print of Victorian Railways drawing number 4057 - Ears for Tramway Overhead ConstructionHas number "7513 D.33" in black pen in bottom right hand corner.tramways, trams, overhead, victorian railways, trolley wire, engineering, electrical engineering