Showing 1078 items
matching leisure
-
Numurkah & District Historical Society
Pair of roller skates
2 x roller skates. Metal base (rusty) with leather straps to tie around shoes. Metal base can be adjusted (made shorter or longer by wing-nut underneath. Hard plastic wheels (4)children, toys, presents, roller skates, leisure -
Numurkah & District Historical Society
Nursery Rhyme Picture Blocks
Cardboard box containing 16 wooden blocks with part-pictures on them of nursery rhymes. Blocks join together like jigsaw pieces to make nursery rhymes pictures See photochildren, leisure, games, puzzle, nursery rhymes -
Numurkah & District Historical Society
Sportsland (Baby Animals) Puzzle (cover only)
Cardboard cover for a box - jigsaw puzzle See photofamily, children, leisure, jigsaw puzzle -
Moorabbin Air Museum
Leisure object (Item) - Leather Card Box Complete With Two Sets Of Playing Cards And Six Dice
-
Ballarat Tramway Museum
Leisure object - Jigsaw, Resort Puzzles Pty Ltd, c1988
BTPS Postcard, featuring No. 27 and 38 in Wendouree Parade (Reg. Item 1781) that has been manufactured or stamped into a 24 piece jigsaw by Resort Puzzles Pty Ltd. of Lithgow, c1988. Card after stamping has been mounted onto a sheet of brown cardboard then enveloped with a sheet of clear light weight plastic and onto the rear, a printed white sheet of paper has been glued or fixed onto it. The pre-printed sheet of paper acts as the rear of the postcard for mailing purposes, providing a stamp location, address and writing area. The printed details give information about the manufacturer, phone number and on the top left hand corner has the words "Greetings from Australia" and has been translated under that into oriental characters.trams, tramways, btps, jigsaw, postcard, wendouree parade -
Ballarat Tramway Museum
Leisure object - Jigsaw, Resort Puzzles Pty Ltd, c1988
BTPS Postcard, featuring trams No. 26, 27 and 33 over three separate images Wendouree Parade (Reg. Item 1657) that has been manufactured or stamped into a 24 piece jigsaw by Resort Puzzles Pty Ltd. of Lithgow, c1990 Card after stamping has been mounted onto a sheet of brown cardboard then enveloped with a sheet of clear light weight plastic and onto the rear, a printed white sheet of paper has been glued or fixed onto it. The pre-printed sheet of paper acts as the rear of the postcard for mailing purposes, providing a stamp location, address and writing area. The printed details give information about the manufacturer, phone number and on the top left hand corner has the words "Greetings from Australia" and has been translated under that into oriental characters.trams, tramways, btps, jigsaw, postcard, wendouree parade -
Ballarat Tramway Museum
Leisure object - Balloons - 40 years, Balloons Wow, Sep. 2011
Two green rubber balloons with the BTM logo printed on them along with the name "Ballarat Vintage Tramway" and "Forty Years" underneath. Produced for the Family Fun Day on the 18th September 2011 to celebrate the 40 years since the closure of the SEC's Ballarat Tramway. Made by "Balloons Wow" Ballarat and filled with helium on the day - advice of Gabriele Boehle in an email to Warren Doubleday of 19/9/2011. Balloons arranged by Andrew Mitchell.Niltramways, trams, btm, 40th anniversary, family fun day, events -
Queenscliffe Maritime Museum
Leisure object - Model Boat Pioneer
SS Pioneer was a steam dredging ship which was in service with the Department of Ports & Harbours, Melbourne, Australia, from 1905 to 1950. The Pioneer (aka SS Pioneer) was a steel steam driven pump driven sand dredge. She was built in Glasgow, Scotland for the Victorian Dept of Board of Works in 1905. The Pioneer was scuttled on 9 March 1950.Half model of suction dredge Pioneer in glass display casemodel, sand dredger, ss pioneer, port of melbourne -
Queenscliffe Maritime Museum
Leisure object - Model SS Time, Jim Sutherland
10.00AM - Received call to prepare and proceed to S. S. Time aground on Corsair Rock with other members of salvage party. Took taxi home to pick up warm clothing and gear returning at once to Fleet Forge works. Arrangements made to board tug Eagle at 5 North Wharf at 1.30PM with diving gear and salvage pumps.Scale model of SS timess time, wrecks, port phillip, corsair rock, model ship -
Queenscliffe Maritime Museum
Leisure object - Model MV Duntroon
The MV Duntroon was a 10,346 ton passenger liner built for the Melbourne Steam Ship Co. by Swan, Hunter & Wigham Richardson's yard, Newcastle-upon-Tyne, in 1935. One of the last purpose-built passenger & general cargo ships for the Australian coastal trade, the Duntroon was also known for its role as a troopship (1942-1949) and for the tragic incident on 20 November 1940 when she hit and sank the small auxiliary minesweeper HMAS Goorangai off Queenscliff with the loss of all 24 of Goorangai crew. This was the first RAN ship to be lost during the Second World War.Scale model of MV Duntroon Scale 1:48model mv duntroon -
Queenscliffe Maritime Museum
Leisure object - Model- PS Hygeia
Hygeia Built in 1890 by Napier, Shanks & Bell of Yoker, Scotland (yard no 49). At 300 ft (92 m) long, she was an enormous paddler, outclassing the luxurious Ozone and surviving in service until 1930. In 1932 her stripped shell was scuttled off Barwon Head. The PS ‘Hygeia’ was a paddle steamer, built by Napier, Shanks & Bell, in Glasgow, Scotland, in 1890. When the paddle steamer PS ‘Hygeia’ was built, in 1890, she was considered the largest and fastest bay steamer afloat. She was capable of carrying up to 2,000 passengers and crew and was finished to the highest of standards. The state rooms were lavishly adorned in polished Oak, Hungarian Ash, Walnut and Sycamore – decorated with gilded pilasters. She would carry some 3,000,000 passengers around Port Phillip Bay in Victoria, during her career of 41 years. The PS ‘Hygeia’ was considered far too young to be scuttled and sent to an early grave – just outside Port Phillip Heads . . .Scale model of PS Hygeia -
Queenscliffe Maritime Museum
Leisure object - Model PS Weeroona
Built in 1910 by A & J Inglis, of Glasgow, Scotland (yard no 290). 1412 t. Her length of 310 ft (95 m) made her the largest paddler on the bay, serving until 1942. It was initially owned by Huddart Parker Ltd, Melbourne. She then embarked on a new adventure having been bought by the US Navy for use as an accommodation ship. She sailed to Sydney and then onwards via Brisbane and new Guinea under tow. She ended up in the Philippines sailing as part of the towed convoy of assorted vessels backing up the US invasion. She came back to Australia owned by the Federal Government and sold for scrap. In 1951, her remains were scuttled off Berry Bay in New South Wales. Scale model of PS Weeroonapaddle steamers, bay steamer, ps weeroona, port phillip -
Queenscliffe Maritime Museum
Leisure object - Model Blue Nose I, Clive Barnard, 1982
Bluenose I was a fishing and racing gaff rig schooner built in 1921 in Nova Scotia, Canada. A celebrated racing ship and fishing vessel, Bluenose under the command of Angus Walters, became a provincial icon for Nova Scotia and an important Canadian symbol in the 1930s, serving as a working vessel until she was wrecked in 1946. Nicknamed the "Queen of the North Atlantic", she was later commemorated by a replica, Bluenose II, built in 1963. The name Bluenose originated as a nickname for Nova Scotians from as early as the late 18th century.Scale model of Bluenose Imodel, schooner, blue nose i, nova scotia, canada -
Queenscliffe Maritime Museum
Leisure object - Model SS Edina, Les Hess
The SS ‘Edina’ is one of the most remembered vessels that plied the waters of Victoria’s Port Phillip Bay. Often referred to as the ‘Old Lady of Port Phillip’. Her active service included the North Sea trade, ‘Crimean War’, ‘American Civil War’, Victoria’s west coast run, New Zealand to Melbourne trade, Queensland coastal trade, and of course, the Port Phillip Bay runs between the years 1880 to 1938. ‘SS’ being an abbreviation for ‘Screw Steamer’ signifying that she was propelled by a steam engine rotating a single propeller, or ‘screw’ as it was know at the time.Model of a well known bay steamer operating in Port Phillip between 1880 and 1938.Model of SS Edinamodel, ss edina, screw steamers, port phillip, bay steamers -
Queenscliffe Maritime Museum
Leisure object - Model Yacht
Hand made by Henry A Zanoni around 1936 - 38The Fisherman's Shed, which is now situated behind the Queenscliff Maritime Museum originally sat on Fisherman's Pier. Fisherman's Pier was constructed in 1856, but it is not known when the shed was constructed on the pier. Registered fishermen used to shelter in this shed and it was used as a clubhouse and later as a meeting place for the Fishermen's Union. Between 1895 and 1946 fisherman Henry Zanoni painted a mural featuring the ships and ferries that were coming into Queenscliff, on the interior walls of the shed. Fisherman's Pier was demolished around 1960 and the Fisherman's Shed was relocated twice, most recently to behind the Queenscliffe Maritime Museum.Model Yacht with blue hull and white superstructuremodel, yacht, henry a zanoni -
Queenscliffe Maritime Museum
Leisure object - Model Ship 'SS Kent'
Kent was used to carry migrants from the UK at the time of the Victorian Gold Rush Model of Sailing Ship 'Kent' - British Registry kent, clipper ships, malcolm pascoe's family, immigration, gold rush -
Queenscliffe Maritime Museum
Leisure object - Model of Pilot Vessel 'Alvina', 1959 -1962
The Australian pilot vessel and steam yacht Alvina had a long and varied career. It was built in the UK as a private yacht, 1891 and in 1903 came to Australia to commence in the pilot service at Port Phillip Heads. This model of the pilot ship is held by the nearby Queenscliff Maritime Museum in Victoria. In 1923 the larger Akuna took over from the Alvina, which then served as an excursion steamer and ferry in Westernport Bay for another 10 years when in 1933 it was replaced by an ex-Sydney vehicular ferry displaced by the new Harbour Bridge. Alvina was not scrapped until 1961. DSC_0046In 1901 the pilots took delivery of their first steam-powered pilot cutter, “Victoria”, 46 metres in length, built at Williamstown. “Victoria” was followed by “Alvina”, “Akuna”, “Akuna II” and in 1953, “Wyuna”, a twin-screw diesel electric pilot cutter 63 metres in length. “Wyuna” served until November 1979 and was then sold to the new Australian Maritime College at Launceston, Tasmania for use as a training ship.Model of the Pilot vessel 'Alvina in glass casepilot service, pilot vessel 'alvina', mr a g woodley -
Queenscliffe Maritime Museum
Photograph - Couta Boats under sail
A Couta boat is a type of sailing boat originally designed and built in Victoria, Australia, around Sorrento, Queenscliff and along Victoria's west coast as far west as Portland. It was originally used as a traditional fishing boat from around 1870 until the 1930s, although it survived as a commercial fishing vessel until the 1950s. From the 1970s onwards a community of enthusiasts started restoring old couta boats to use recreationally.The Couta Boat has been associated with the fishermen of Queenscliff from the first quarter of the 20th Century, and still is of significance due to the popularity of this boat as a leisure sailing vessel.2 Reproduced photographs of couta boat fishing fleet under full sail in Queenscliffcouta, couta boat, sailing, fishing, port phillip, queenscliff -
Queenscliffe Maritime Museum
Leisure object - Half Model Boat, Tony Lemerle [son in law of boat owner], 'Asturias
Half model of a clinker bay boat with white superstructure and green hullASTURIASasturias, half model boat -
Queenscliffe Maritime Museum
Leisure object - Half model 1890 couta boat
Half model of an 1890 couta boat made to plans of 'Ariel'1890's Couta Boat Victoria Aust.couta boat, 'ariel', half model -
Queenscliffe Maritime Museum
Leisure object - Half model of a 3 masted ship
This nameless three-masted sailing ship half model is typical of a piece produced by a first year apprentice. Nameless three-masted sailing ship half model, typical first year apprentice piece. Model acquired damaged and incomplete. Repaired and completed by Arthur Woodley Crib Point September - October 2008.boat building, boat half model -
Queenscliffe Maritime Museum
Leisure object - Half Model yacht
Before modern design aids, half boat models were made to scale to the boat's hull being built . In later times these scale models were also made by first year apprentices in timber boat building. Now they are mostly prized as a decorative object.Several timber boat builders operated in the Queenscliff area over time.Timber half model of an unknown yachtboat building, boat design, model boats -
Queenscliffe Maritime Museum
Equipment - Dip Net
Common home made example of a dip net used by fishermenRound shaped dip net used to hold caught fish.fishing, leisure activity -
Bendigo Historical Society Inc.
Leisure object - CHILDS BUILDING BLOCKS
Assorted terracotta building blocks of various shapes and colours, 18 in total with cardboard box & patterns.toys, general, blocks -
Bendigo Historical Society Inc.
Leisure object - DOLLS DAY BED
A small day bed for a doll, upholstered in floral tapestry fabric in tones of pink and black, single end with top which opens in both directions, inside lined with pink fabric.toys, dolls' furniture, day bed -
Bendigo Historical Society Inc.
Leisure object - DOLL
Doll with composition body, no manufacturers mark, dressed in very old lace bonnet and cloth nappie, moveable limbs, sleeping doll with opening blue eyes, has been a ma ma doll, no longer working.toys, dolls, composition -
Queenscliffe Maritime Museum
Leisure object - Doll, 1930-1960
Made from design by Norah WellingsFemale sailor doll in blue felt uniformAURELIA-FLAVIAdoll, norah wellings, sailor -
Queenscliffe Maritime Museum
Leisure object - Model Boat, Scale model of Couta Boat "Joyce", 2001-2002
1/10 size scale model of couta Boat Ariel. Built by Arthur Woodley Crib Point, April 2001- June 2002. Although later fitted with a motor, Ariel was one of the last couta boats designed principally for sailing, and still sails at Portland. The original "Ariel" was built in 1927 by J A Jones of Melbourne for Keiller Brothers of Portland, Victoria.Scale Model of the Couta Boat Arielcouta boats, ariel, boat models, arthur woodley -
Queenscliffe Maritime Museum
Leisure object - Model Ship, HMAS Goorangai
The H M A S Goorangai was struck by the M V 'Duntroon' on the night of 20/11/1940 in the South Channel of Port Phillip Bay. All 24 crew members of the Goorangai were lost.Model of 'Goorangai" G Rduntroon, port phillip bay, ship models -
Queenscliffe Maritime Museum
Leisure object - Model Boat
The Peninsula Princess is a single ended roll-on/roll-off vehicle ferry owned by Peninsula Searoad Transport of Victoria, Australia. It operated between the heads of Port Phillip Bay between the towns of Queenscliff and Sorrento from 1987 to 1993. It was replaced by the MV Queenscliff. Scale Model of Peninsula Princess, the first car ferry to operate between Queenscliff and Sorrento in wood and glass display casecar ferry, sorrento, queenscliff