These are milk bottles from the Warrnambool firm of Antarctic Ice. In the 1930s a pasteurising plant was set up in Warrnambool in conjunction with an ice works in Kepler Street, Warrnambool, known as Antarctic Ice (Good and Stevenson). This firm secured a milk supply from several dairy farmers in the Warrnambool district. Antarctic Ice at the Kepler Street site was eventually bought by the Warrnambool Cheese and Butter Company and Kraft Foods as equal partners and the milk was marketed as the Sungold brand. A farmer, Kaye Ryan, had set up a pasteurization plant in East Warrnambool (Raglan Parade/Verdon Street) to treat his own milk in opposition to Antarctic Ice and later Sungold. Kraft and Warrnambool Cheese and Butter purchased the Ryan business and the Sungold operations moved to the Ryan site. Kraft sold its share of Sungold and in 1989 the Sungold plant was moved to the Warrnambool Cheese and Butter Factory at Allansford where it operates today. These bottles are of great interest, firstly as examples of the pint bottles in which we used to receive bottled milk in the mid 20th century and secondly as examples of the bottles used by an important local Warrnambool firm, Antarctic Ice. These are six clear glass one pint milk bottles. They have round bases and bodies tapering through to the neck with a round moulded glass top. These bottles were originally sealed with a circle of waxed cardboard pressed into a recess at the top but there are no seals with these bottles. .1 bottle has a slight chip on the base and on the top opening.‘This bottle contains milk bottled for sale by Antarctic Ice Products Pty Ltd Warrnambool’ ‘Bottle is the property of the above. It is loaned and cannot be legally used by others.’ ‘497’ milk supply in warrnambool district, history of warrnambool

Every Anzac soldier who served on the Gallipoli Peninsula, or in direct support of operations there - or his family if he did not survive until into the late 1960s - was entitled to be issued with the Anzac Commemorative Medallion. The Medallion was issued in 1967. The medallion was sent by registered post and comes in a presentation case with a moulded velvet base to receive the medallion, with a silk lined hinged lid.Medallion presented to all army personnel serving at GallipoliANZAC Medallion Badge issued in memory of W.H. MathewsThe obverse of the medallion depicts Simpson and his donkey carrying a wounded soldier to safety. It is bordered on the lower half by a laurel wreath above the word ANZAC and the date 1915 above the donkey. The reverse shows a map in relief of Australia and New Zealand superimposed by the Southern Cross. The lower half is bordered by New Zealand fern leaves and the name W.M. Mathewsmedallion, army, anzacs, australian army, world war 1, ww1, gallipoli

There is a slight ridge ridge along the side where the wet clay has been pushed up between the bricks as they have been stacked. Wooden press moulds were used to form the brick and lead shaped markers were used to brand a frog in the brick. The frog is the hollow in the centre of the face of the brick. This centre helps the bricks to adhere in construction.A hand-made brick. There is a slight ridge along the top side where it has been pushed up between the bricks as they dried. The frog (hollow in the centre) is an unusual elliptical shape. brick building construction

a) 1 common, clear glass ink bottle with 'burst-off' straight finished neck and a groove on two sides upon which a pen would rest. There are variations of this largely English-made style glass inkwell made in cup base moulds. Cursory grinding smoothed out the sharpness of the rim. b) 2 cylindrical, plain, pottery inkwells These three inkwells were commonly used in homes, schools and Churches by pioneer settlers in Moorabbin Shire c1880 -1900 2 cylindrical pottery inkwells and 1 square, clear glass inkwell with a distinctive groove on 2 sides to rest a pen c 1800 - 1900education, inkwells, pottery, glasswork, craftwork, moorabbin, brighton, early settlers, pioneers

In 2017 members of the Vision Australia Heritage group visited the Black and White Committee to assist them in preparing papers for collection by the State Library of New South Wales. This photo was taken in the B&W offices in Double Bay. L-R: Deborah Mould (VA), Pam Scharrer, Michaelene Graves, Susan Diver, Anne Mountstephens, Gael Vincent (VA)Digital image of six women black and white committee, vision australia

Colour photograph of hat making equipment,for Heritage Week display at the Local History Centre (former Courthouse), 728 Main Rod Eltham. (Home of Eltham District Historical Society) The equipment was used at the Hat Factory in Eltham which started in the 1940s. The equipment shown includes a mould for making felt hats, stud press, looping machine for berets and hand sewing machine for straw hats. Sign accompanying the display is hand written and reads: "Eltham has not generally been known for manufacturing industry. One factory which started in the 1940s was "the hat factory" in Sherbourne Rd. The equipment displayed here includes moulds for making felt hats, stud press, looping machines for berets, hand sewing machine for straw hats."heritage week, eltham, courthouse, hat factory, hat mould, activities

This bottle comes from the Warrnambool aerated waters factory of Ralph Reeves. This business was established in Koroit Street, Warrnambool in the 1860s as the Union Cordial Factory by John Davis and then bought by John Fletcher in 1885. Fletcher’s business continued until 1930 when it was bought by Ralph Reeves. Coming to Warrnambool about 1900 Reeves had managed a Banyan Street, Warrnambool factory which had been established by John Rowley. Reeves was joined by his son Reg in Warrnambool and Reg operated the business from 1946 to 1972. The trade name of Reeves was still used after Reg Reeves died in the early 1970s and continued on for some years. This bottle is of interest as an example of an early Reeves bottle. We have few Reeves bottles with the original paper labels. Cordial manufacturing in Warrnambool was an important industry for over 100 years.This is a clear glass bottle with a rounded base and rounded body tapering to a short round neck with a moulded glass top at the opening. The screw stopper is black and made of composite material. The inside of the bottle is discoloured. The details of the manufacturer of the contents are impressed into the glass on the side and there is a paper label pasted on the side of the bottle (black, red, yellow tonings) ‘R.V. Reeves’ (x2) 34’ ‘Lemonade Warrnambool Cordials Pty Ltd’ ‘Bottle not complete without stopper’ ‘This bottle is the property of Warrnambool Cordials Pty Ltd Warrnambool’ ‘Please replace stopper, Reeves lemonade, sparkling & refreshing, R.J. Reeves Warrnambool, bottle 2d. deposit’ ralph reeves, warrnambool, cordial manufacturers in warrnambool, history of warrnambool

Prize awarded to George G Morrison (birthdate 3/2/1862) for excellence in Algebra and Geometry in the first form; George entered the school 23/8/1877 and left less than a year later on 1/7/1878.Very early example of an academic prize awarded by Principal John Garbutt (1877 - 1909). no date of publication but c1866, xxiv + 502 pages, bound in elaborate embossed maroon cloth binding, with lacquered illustration and college crest in gilt on front cover, decorated spine; in very poor condition through mould and wear; illustrated with steel engravings, each page of text with red lines at margins, all edges giltBook plate inside front cover: Ballarat College crest / Algebra and geometry / First form / First PRIZE / Awarded to / G Morrison / CHRISTMAS 1877 / JOHN GARBUTT, M A PRINCIPALgeorge-g-morrison, ballarat-college, john-garbutt, 1877, book-prize

Part of Graham Collection, donated by the Family of Misses Mary and Edith Maude Graham, of 4 Blair Street, PortlandPorcelain sugar bowl with stamped relief pattern. Transfer image of violets and leaves. Gold highlights. Glazed with green glaze around base, white elsewhere. Made from two-piece mould. Sugar bowl: Base: 9.5 x 6 Height: 5.3 Lid: Base: 4.5 x 3.5 Height: 4.3

Horse drawn one way plough with one share - mould board; two discs, one fluted. Two off set adjustable wheels. Hand steered. adjustable. Suited for dry soil and hillside. Possibly made by Thomas H Corbett of Perseverance Ironworks in Shrewsbury Shropshire who developed a similar plough in 1870s.'V13R and A8178' on the main frame. 'DH53' on rotary blade.|'V5' on handle attachment to frame.rural industry, orcharding

Item in the collection re William Anthony (Bill) Theodore DSM. The Sailor is Willam Anthony Theodore DSM, enlisted on 2.9.1940 in the RAN No PM2981. He served in the Seige of Tobruk, Greece, Crete, Matapan, Singapore, Pacific Islands, New Guinea to the Phillipine's. The HMAS Vendetta he was sailing on made 39 trips into Tobruk Harbour during the siege. In October 1941 so many bombs were dropped around the Vendetta that her Boilers and Engines shifted on their mountings and was ordered to Singapore for repairs. After Bill served on HMAS Arunta and was awarded the Distinguished Service Medal for "Gallantry, Skill and Devotion to Duty" during the Assault Operations at Lingayen Gulf. Bill was discharged from the RAN on 21.11.1945. From 1956 - 1995 over specific years Bill held the positions of President, Vice President, Treasurer & Welfare Officer of the "Bendigo Rats of Tobruk Association". He was awarded a Life Membership & a Certificate of Appreciation for his services.Photograph, B&W portrait of an RAN Sailor on photographic paper, noted on Sailors Cap "HMAS Cerberus". Frame , metal backing with stand, front shallow convex shape with light brown colour paper mount, heavy plastic cover moulded to shape over photo and mount, owners white adhesive label on the back.Information on label, "THEODORE William Anthony", in black ink print, "Preferred name: Bill/19.03.1917"framed accessories, ran, theodore dsm, photograph, portrait

This coat would have been part of a St Johns Brigade ambulance uniform. The buttons were made by A J Parkes, who manufactured buttons for the Australian Defence force. A J Parkes began manufacturing plastic injection moulded buttons from the early 1980's which suggests that the coat would have been made and worn during the late 20th century.This item is representative of a particular piece of uniform that would have been worn by a member of the St Johns Ambulance Brigade. It has historic significance as an item dating to the late 20th century which may have been used in the service of wounded military personnel. It also has some areas of staining which could have been coused by contact with blood. This could potentially be useful for scientific research purposes.Off white knee length coat with long sleeves. There is an epoulette on each shoulder and pointed collars. There is a deep waist pocket on either side of the coat. There is one silver plastic button at the top of each pocket. These have the St John Ambulance symbol on the front, which consists of an eight pointed cross, with two very small lions and two very small unicorns nestled in the corners of the cross. These motifs are surrounded by the words "THE ST JOHN AMBULANCE BRIGADE". The epoulettes are fastened with one identical button each. Underneath each epoulette there is also a clear plastic button attached the shoulder seam. Each sleeve has a 36mm long cuff which is fastened with one St John Ambulance Brigade button each. There are 10 clear plastic buttons that fasten the entire front of the coat. The back has two pleats commencing near the nape of the neck. The back of the collar on the interior seam has a label which has been cut and shows only a small amount of detail. Printed in faded blue on the label is: "E.R. TIMMINS".military, coat, st johns brigade, uniform, ambulance, st johns brigade ambulance, st johns

A tray is a shallow platform designed for the carrying of items. It can be fashioned from numerous materials, including silver, brass, tin, sheet iron, paperboard, wood, melamine, and moulded pulp. Trays range in cost from inexpensive moulded pulp trays which are disposable and inexpensive melamine trays used in cafeterias, to mid-priced wooden trays used in a home, to expensive silver trays used in luxury hotels. Some examples have raised galleries, handles, and short feet for support. Trays are flat, but with raised edges to stop things from sliding off them. They are made in a range of shapes but are commonly found in oval or rectangular forms, sometimes with cutout or attached handles with which to carry them. A more elaborate device is the tray table, which is designed to accommodate a tray, or to serve as a tray itself. There are two primary kinds of tray tables. https://en.wikipedia.org/wiki/TrayThe use of the tray, and the various types.Metal rectangular tray with rounded edges and abstract design. Rusty.The design now looks abstract, but there are signs that it may have been a floral design originally.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, tray, kitchenware, food

This brown glass bottle has been handmade from about the 1870s-1910s. The bottle, possibly used to store ale or soda or mineral water, was found in the coastal waters of Victoria. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe into the molten glass blob at the end of the pipe. The glass was blown out to fit into the shape of the cylindrical dip mould. Once it hardened, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck while carefully using a tool to hold the base. A 'ponty' (pontil) tool would been used to complete the shape, pushing up the base. A tool would have been used to cut off the bottle from the blowpipe and apply and form the ring band on the neck. Bottles like this would usually be sealed with a cork, which may have been held in place with wax or wire and tape. Although this bottle is not linked to a particular shipwreck, it is recognised as a historically significant example of handmade, late 19th to early 20th century beverage bottles imported for use in Colonial Victoria. The bottle is also significant for its association with John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several shipwrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, brown glass, tall and slim, cork-top style. Tooled finish on mouth with applied ring, shoulder seam, body tapers inwards towards base. Concave base has pontil mark. Sediment inside bottle. Glass has shiny surface and diagonal rings from shoulder to mouth, then is less shiny and has an slightly undulating surface from shoulder to base. The surface is markedly raised where base and shoulder meet. Glass has many scratches.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, collectable, bottle, dip mould, soda bottle, brown glass, ale bottle, beverage bottle

This olive green glass bottle has been handmade from about the 1840s to 1870s. The bottle, possibly used to store or soda or mineral water, was found in the coastal waters of Victoria. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe into the molten glass blob at the end of the pipe. The glass was blown out to fit into the shape of the cylindrical dip mould. Once it hardened, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck while carefully using a tool to hold the base. A 'ponty' tool would have been used to form the push-up base. The mouth of the bottle was cut off from the blowpipe and a piece of soft glass would be added to the mouth to then form the double collar. Bottles like this would usually be sealed with a cork, perhaps with tape or and anchored wired over it to keep it in place. Although this bottle is not linked to a particular shipwreck, it is recognised as a historically significant example of handmade, 1840s to 1870s beverage bottles imported for use in Colonial Victoria. The bottle is also significant for its association with John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several shipwrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, olive green glass. Applied double lip; deep upper, ring lower. Slightly bulbous neck with crease lines n glass. Shoulder seam. Body tapers inwards towards base. Concave base, inward pontil mark, uneven base. Sediment inside bottle.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, collectable, bottle, dip mould, soda bottle, beverage bottle, green glass, olive glass, double collar

This nameplate was attached to the steel steamer Matthew Flinders I, a Suction Hopper Dredge used for pumping up sit and sanding from seabeds. It was donated by the Marine Engineer, Neville Dodds, from Ports and Harbours, from the Matthew Flinders I. The Matthew Flinders was constructed by Morts Dock & Engineering Coy. Ltd in Sydney, New South Wales. Identified as Ship No. 40, the dredge had twin screw engines that were made in Sydney. Its gross tonnage was 1180. It was launched on July 15th, 1916, and registered in 1917 at the Port of Melbourne by the owner, the Department of Public Works in Victoria. Unlike bucket dredges, the Matthew Flinders did not use permanent moorings but instead had bow and stern anchors. It travelled forward on the bow anchor, taking up a strip of even-depth wilt from the bed below. A local newspaper noted that the Matthew Flinders has many advantages that were especially useful for its work at Warrnambool. Warrnambool Harbour had been experiencing silting and sanding for many years. The problem continued even after the construction of the Breakwater in 1890, which was overseen by New Zealand engineer Arthur Dudley Dobson. Melbourne’s Department of Ports and Harbours sent the new Matthew Flinders to dredge the heavy silting in the Warrnambool Harbour in May 1919. This work was previously done by the smaller dredge, the Pioneer. However, after a month of work, the Matthew Flinders was returned to Melbourne for alterations to make it suitable for work in the heavy seas it experienced at Warrnambool. Both dredges were sent up from Melbourne when required over the years to periodically attend to the silting in the Harbour, but the Matthew Flinders was preferred because of its efficiency. It was still dredging the Harbour even in July 1938. The ship’s original master was J G Rosney. In February 1922 Percy Taylor from Ports and Harbours joined the Matthew Flinders as a Mate. 1923 the master in charge was Captain Dunbar. In August 1926 Percy Taylor was appointed as her Master and was later transferred to the Pioneer as Master in 1933. 1930 the dredges were no longer required as the Harbour was no longer suitable as a port. However, one source notes that the Matthew Flinders was still dredging the Harbour in 1938.This nameplate is significant for its association with the suction hopper dredge Matthew Flinders I, which was used to remove the build-up of silt and sand from the Warrnambool Harbour, allowing shipping activities to continue to operate in the Port of Warrnambool. The nameplate identifies the vessel and shows that it was built in Australia in the early 20th century for use within Australia. The need for dredging in the Warrnambool Harbour was a serious and ongoing problem, as silting continued to happen after a series of measures were taken to try and resolve the issue. Eventually, the Harbour could no longer function successfully as a port.Brass nameplate, rectangular with cut-away corners and moulded text, mounted with screws on timber. The plate is from a vessel, the dredge Matthew Flinders I, ship no. 40, built by Morts Dock & Engineering Coy Ltd in Sydney, and registered in 1917. A small rectangular engraved plaque below the nameplate gives further details of the ship and the donor.On nameplate: "MORTS DOCK / & / ENGINEERING COY. LTD. / SHIP BUILDERS / SYDNEY 1917 / SHIP NO 40" On small plaque: "Donated by / NEVILLE DODDS / PORTS & HARBOURS / MARINE ENGINEER / EX "MATTHEW FLINDERS I"flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, dredge, mathew flinders i, steel steam ship, twin screw engines, nsw, state of victoria, suction hopper, public works melbourne, warrnambool harbour, lady bay, sanding, silting, breakwater, morts dock & engineering co ltd, captain dunbar, ship no. 40, niville dodds, ports & harbours, marine engineer, marine technology, ship relic, percy taylor, matthew flinders, pioneer

This bottle was made by Whitall Tatum and Co. of U.S.A. It was used in the pharmacy business of R. F. Kennedy and Co. of Warrnambool and it has the well-known Kennedy symbol of a lighthouse on a rocky face on a coastline with ships in the distance. Richard Frank Kennedy (1826-1903) was born in England and came to Warrnambool in the early 1880s where he quickly established a large pharmacy business in Timor Street. In 1891 he built new premises with the shop described as one of the most elegant and best-stocked chemist’s shops in Victoria. He was a retail, wholesale and manufacturing chemist. Kennedy was active in community affairs in Warrnambool and was a foundation member of the Warrnambool Bowls Club, being the first Vice-President and an early President. The pharmacy business continued after Kennedy’s death, trading as ‘R.F. Kennedy and Co’. Richard Frank Kennedy was one of the most significant businessmen in Warrnambool in the late 19th century. The products of his chemist shop and factory were distributed all over Victoria and beyond. This bottle is a very good example of a Kennedy chemist bottle. This is a clear glass bottle used in the pharmacy of R. F. Kennedy and Co of Warrnambool. The bottle has a rectangular-shaped body with rounded edges, a circular shaped neck and a moulded top that extends over the neck. The top has a piece missing and there is no stopper. The chemist’s logo and name are embossed on the side of the bottle and the maker’s name is on the base of the bottle. ‘R.F.Kennedy & Co, Chemists Warrnambool’ ‘W.T. & Co, U.S.A.’ ‘Pat. Dec 11 1894’ r.f.kennedy,, chemists in warrnambool

These bottles were used in the pharmacy of R.F.Kennedy and Co. of Warrnambool. Richard Frank Kennedy (1826-1903) was born in England and came to Warrnambool in the early 1880s. He established a pharmacy in Timor Street. This was a retail, wholesale and manufacturing business. In 1891 Kennedy erected a new building and his business there was described as one of the most elegant and best-stocked chemist’s shops in Victoria. Kennedy was active in Warrnambool community affairs and was a foundation member of the Warrnambool Bowls Club, being its first Vice-President and an early President. After his death the pharmacy business continued, trading as ‘R.F.Kennedy & Co.’ Richard Frank Kennedy was one of the most significant businessmen in Warrnambool in the late 19th century. The products of his pharmacy wee distributed all over Victoria and beyond. His lighthouse logo was well-known. These bottles are good examples of those used in the Kennedy business. These two identical bottles are made of clear glass. They have rectangular-shaped bodies with rounded edges, circular-shaped necks and moulded circular tops with openings. One has a glass stopper. The sides of the bottles have the Kennedy logo of a lighthouse on a rocky cliff on the coastline with ships in the distance and the name of the chemist. There is some discoloration inside one of the bottles. ‘2/3 vi’ ‘R.F.Kennedy & Co. Chemists Warrnambool’ ‘M’ r.f. kennedy, warrnambool chemist, chemists in warrnambool, history of warrnambool

These bottles are known as marble stopper bottles. This type of bottle was filled upside down so that as soon as the filling stopped the stopper was forced down to seal the bottle against the rubber ring. Pressure inside the bottle would keep the marble pressed against the top of the bottle. To open the bottle the marble was pressed down where it would fall into the neck chamber below. The marble would stay inside the chamber when the bottle was tilted up for drinking. These bottles have come from the aerated waters factory of John Fletcher of Warrnambool. This factory in Koroit Street was established in the mid 19th century by John Davis. As a young boy John Fletcher worked at the cordial factory of John Rowley in Banyan Street, Warrnambool and then worked for a number of years for John Davis at his Union Cordial Factory. In 1885 John Fletcher succeeded John Davis and continued in this business until 1930.. The business was then taken over by Ralph Reeves. John Fletcher manufactured aerated waters, soda, tonic waters, lemonade, ginger ale, hop beer, hop bitters, sarsaparilla and cordials. These bottles are of interest firstly because they are good examples of marble stopper bottles, no longer in use today. They are also important because they are John Fletcher bottles and he was a prominent soft drinks manufacturer in Warrnambool for over 40 years. These four bottles are made of green coloured glass. They have a round body with deep indentations at the top, narrowing the entrance to the neck which is short and thick. The top opening is made of thick moulded glass. A glass marble is loose in the neck section. The rubber ring inside the neck is missing. The manufacturer’s details are embedded into the glass on both sides of the bottle.‘Lemonade’ ‘J.Fletcher’s Aerated Waters Koroit Street Warrnambool’ ‘This bottle is the property of John Fletcher Warrnambool and cannot be legally used by others’ fletcher's cordial, marble stopper bottle, warrnambool cordial

Safety razors were fist produced in the late 1800s by the Star Razor Company in U.S.A. and it was a former employee of this company that produced the Gem Safety Razor in 1898. The Gem razor, to be produced in later years by the American Safety Razor Company, became one of the world’s most popular razors and in the 20th century it was the major competitor to the Gillette razor produced in the U.S.A. The safety razor has been largely superseded by the disposable razor blade and the electric razor. This safety razor has no known local provenance but it is retained as an example of the type of safety razor used in households for the most part of the 20th century.This is a silver-coloured Gem safety razor in a rectangular green Bakelite box. The box lid has metal pins acting as hinges and inside the box there are moulded sections to ensure the razor fits snugly into the box. The razor handle has an etched decorative pattern and the top part opens so that a blade can be inserted. There is a blade in this section. On box: ‘Gem’ Blade: ‘Gem Double Life, Gem Blade, British Made’ Inside the razor: ‘Gem Brooklyn New York Made in U.S.A.’ gem safety razor, history of warrnambool

The book has a dark green and brown leather hardback cover. There are also water stains and what appears to be mould growth. The cover has an Imprinted border around the edges of the title. The spine is torn at the top and bottom. A page is torn out between front cover and introduction page. The pages have stains from use and some foxing. On May 20 1812, a group of Church of England evangelical clergy & laity met in The Freemasons' Tavern in Great Queen Street, London, to form "The Prayer Book and Homily Society." The founders were also members of the Church Missionary Society (founded 1799) and the British and Foreign Bible Society (founded 1804). The purpose of this Society was to print and distribute the Book of Common Prayer (1662) in English and in other languages, as needed by missionaries; and also to publish "The Book of Homilies" which is referred to in "The Thirty-Nine Articles of Religion" as a source of the foundational doctrine of the Church of England by law established. The Society published the Prayer Book in at least 12 languages and seems to have been at the peak of its activity in 1828-1833. The Homilies were only published in English and in editions without the critical apparatus. http://pbs1928.blogspot.com/2003/01/prayer-book-homily-society.htmlreligion, religious text, sermons, homilies

This spool of surgical wire was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” that includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he would take time to further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . The organisation began in South Australia through the Presbyterian Church in that year, with its first station being in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill where he’d previously worked as Medical Assistant and purchased a share of the Nelson Street practice and Mira hospital from Dr Les Middleton one of the Middleton Brothers, the current owners of what was once Dr Tom Ryan’s practice. Dr L Middleton was House Surgeon to the Nhill Hospital 1926-1933, when he resigned. [Dr Tom Ryan’s practice had originally belonged to his older brother Dr Edward Ryan, who came to Nhill in 1885. Dr Edward saw patients at his rooms, firstly in Victoria Street and in 1886 in Nelson Street, until 1901. The Nelson Street practice also had a 2 bed ward, called Mira Private Hospital ). Dr Edward Ryan was House Surgeon at the Nhill Hospital 1884-1902 . He also had occasions where he successfully performed veterinary surgery for the local farmers too. Dr Tom Ryan then purchased the practice from his brother in 1901. Both Dr Edward and Dr Tom Ryan work as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He too was House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. Dr Tom Ryan moved from Nhill in 1926. He became a Fellow of the Royal Australasian College of Surgeons in 1927, soon after its formation, a rare accolade for a doctor outside any of the major cities. He remained a bachelor and died suddenly on 7th Dec 1955, aged 91, at his home in Ararat. Scholarships and prizes are still awarded to medical students in the honour of Dr T.F. Ryan and his father, Dr Michael Ryan, and brother, John Patrick Ryan. ] When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery states “HOURS Daily, except Tuesdays, Fridays and Saturday afternoons, 9-10am, 2-4pm, 7-8pm. Sundays by appointment”. This plate is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. Dr Edward Ryan and Dr Tom Ryan had an extensive collection of historical medical equipment and materials spanning 1884-1926 and when Dr Angus took up practice in their old premises he obtained this collection, a large part of which is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. During his time in Nhill Dr Angus was involved in the merging of the Mira Hospital and Nhill Public Hospital into one public hospital and the property titles passed on to Nhill Hospital in 1939. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. ). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (The duties of a Port Medical Officer were outlined by the Colonial Secretary on 21st June, 1839 under the terms of the Quarantine Act. Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served as a Surgeon Captain during WWII1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. Their interests included organisations such as Red Cross, Rostrum, Warrnambool and District Historical Society (founding members), Wine and Food Society, Steering Committee for Tertiary Education in Warrnambool, Local National Trust, Good Neighbour Council, Housing Commission Advisory Board, United Services Institute, Legion of Ex-Servicemen, Olympic Pool Committee, Food for Britain Organisation, Warrnambool Hospital, Anti-Cancer Council, Boys’ Club, Charitable Council, National Fitness Council and Air Raid Precautions Group. He was also a member of the Steam Preservation Society and derived much pleasure from a steam traction engine on his farm. He had an interest in people and the community He and his wife Gladys were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Spool containing fine, flexible lengths of surgical wire from the W.R. Angus Collection. The wire has no sign of corrosion. There is more than one length of wire wound around this bobbin and the wires are of different thicknesses. The spool is clear plastic with four holes moulded into each end. Once part of Dr T.F. Ryan's medical practice. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, surgical wire, spool of surgical wire, dr angus, dr ryan, medical equipment, warrnambool base hospital, nhill base hospital, mira hospital, flying doctor, medical history, medical treatment

This spiky, pointy metal flower holder, often called a flower frog or kenzan, was made around the late 19th to the early 20th centuries by Stayput Products of Melbourne, Australia. The flat metal base has been made in layers with the head of the spikes between the layers. It is likely to be handmade. Heavy flower holders made of non-corrosive metals are designed to sit in the base of a vase, dish, bowl or other suitable holder so that cut flower stems can be pushed into the spikes and held firmly in the arrangement. Flower frogs can be made of glass, ceramics or, more recently, synthetic materials.The flower holder is an example of Victorian era domestic decoration aids that have carried through to the 21st century.Flower holder, rectangular block made from layers of metal, with spikes embedded into the metal. The block is heavy, likely to be lead, and the spikes are strong brass pints arranged evenly in rows. There are remnants of florist's putty between some spikes. An inscription within concentric oval rings is moulded in the flat base. Made by Stayput Products, Melbourne, Australia.Stamped into the metal: "STAYPUT / PRODUCTS / MELB. AUST."flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, flower frog, flower arrangements, flower holder, pin-holder, stayput, flower aid, ikebana flower arrangement, kenzan, moribana style, flower support, melbourne manufacturer, spiky pin frog, metal flower holder, stayput products, flower block, flower arranger, vintage, antique, late 19th to early 20th centuries, vase accessory, decorative item, floral arrangement support, florist accessory, floral art, needle aids, victorian era

Booklet of 24 pages containing the score of ' Donizetti's lyric Tragedy of Lucrezia Borgia, Prima Donna -- Miss Catherine Hayes. Rendered into English by J. Wrey Mould, and now produced at the Theatre Royal, Melbourne. Musical Director and Conductor -- M. L. Lavenu. Printed and published by Wilson Mackinnon & Fairfax 'Argus' Mercantile Printing Office.entertainment, opera, donizetti, lucrezia borgia, catherine hayes, j. wrey mould, theatre royal melbourne, wilson mackinnon and fairfax, argus mercantile printing office

The first all transistor hearing aids appeared in 1953. They were created to replace vacuum tubes; they were small, required less battery power and had less distortion and heat than their predecessor. The vacuum tubes were typically hot and fragile, so the transistor was the ideal replacement. The size of these transistors led to developments in miniature, carbon microphones. These microphones could be mounted on various items. There were body hearing aids where the earpiece was connected to the hearing aid and battery pack worn on the body. Ear level hearing aids consisted of eyeglass, behind the ear (BTE), in the ear (ITE), and in the canal (ITC, CIC) hearing aids. A Widex 25 hearing aid from the 1950's made in Denmark. Brown and gold metallic casing with a volume control dial and an on/off switch. The curly wire runs to a circular outer disc. Although not present the disc would normally connect to an ear mould which is individually fitted to the wearer. The item comes in a soft leather case."DENMARK" inscribed on gold front. "WIDEX 25" inscribed on back. "WIDEX" on inside cover of case. "W" on outside cover of case device, hearing aid, loss, hard of hearing, deaf children australia, victorian school for deaf children, vsdc, denmark, widex

4 matching object set. Object 1:Tea cup, object 2: saucer, object 3:plate, object 4: milk jug. Off white china tea set with moulded ribbed pattern. Floral painted design on all items in black and deep red. All items have gold leaf trim on edges.On object 4, milk jug: Rd64638 stamped on bottom and 2339 written in gold paint also on bottom.domestic items, food & drink consumption, tea set, milk jug, cup, saucer, plate, floral design, set, matching.