Beer came in bottles sold at licensed premises either locally or in larger cities visited during shopping expeditions.The shape of the bottles changed. The bottles were re cycled remaining the property of the manufacturer who paid for them. History of the Richmond Brewery, Richmond.Historical: Change of bottles - shape, glass, embossing. Collected by bottle collectors. Aesthetic: Display showing embossing & shape especially if in good condition.Clear glass bottle used for beer. Bottom half has straight sides. The top half tapers to the opening where a metal crimp fits. It has a crown seal. The glass is joined on two sides longitudinally. It is heavily embossed, in capital letters, around the base of the side around its circumference and at the base.Bottom sides: 'The property of Richmond N.S. Brewing Co. Pty. Ltd.' Base: 'R.B.' and underneath these letters 'R.'. and in between and much smaller S.3.bottle, beer, richmond brewery, drink, richmond

Beer came in bottles sold at licensed premises either locally or in larger cities visited during shopping expeditions. The shape of bottles were recycled remaining the property of the manufacturer who paid for their return.History of the company - Pick Ax, AdelaideHistorical: Change of bottles - shape, glass, embossing. Collected by bottle collectors. Aesthetic: Display showing embossing & shape especially if in good condition.Clear brown glass bottle used for Beer. Long straight sides before sharp taper to neck which has a slight bulb shape. Glass joined longitudinally on 2 opposite sides. Cork is stuck inside the bottle. Along the bottom of the sides there are 3 rows of heavily embossed print (capital letters), beginning with a circle. Embossed on base: 634. At bottom: circle (can't read). 3 lines: This is the Property of / ....Bottle Co-Operative / Company Limited South Walk.bottle, brown glass, beer, adelaide brewery, pick ax brewery

Beer came in bottles sold at licensed premises either locally or in larger cities visited during shopping expeditions. The shape of bottles were recycled remaining the property of the manufacturer who paid for their return. History of Manufacturers Bottle Co. of VictoriaHistorical: Change of bottles - shape, glass, embossing. Collected by bottle collectors. Aesthetic: Display showing embossing & shape especially if in good condition.Clear brown glass beer bottle. Straight sides 190 mm from base. Sharp taper to neck which tapers for 90 mm to opening. At top of straight side is a heavily embossed spade (as in cards) shape with M.B. at top and C.V. beneath - both inside spade shape. Bottle made with 2 longitudinal halves. At the bottom near the base is heavily embossed print (in capital letters) around the circumference. At the base is embossed a horseshoe shape.Inside spade shape: M. B. above C. V.. Along the circumference at the bottom "The Property of Manufacturers Bottle Co. of Victoria Pty. Ltd.'. At the base; A horse shoe shape with a pointed curve.bottle, beer, munufacturers bottle co. of victoria, horse shoe shape on bottle, spade shape on bottle

Green Champagne Style Bottle. A broken cork is in the mouth. The bottle is unbroken and has a circular paper label that contains the words ''Tonic Beer manufactured by D. Oswald Eaglehawk.'' The background of he label is dark blue with white lettering. The bottle at the base is 9 cm in diameter and 30 cm high.''Tonic Beer manufactured by D. Oswald Eaglehawk.''food technology, bottling, soft drink bottle

Large Green Champagne Style Bottle. A Cork With Silver Foil Attached Is In The Mouth. The Bottle Is Unbroken and has A Circular Paper Label That Contains The Words ''Tonic Beer Manufactured By D. Oswald Eaglehawk.'' The Background Of The Label Is Dark Blue With White Lettering. The Bottle At The Base Is 12 cm in Diameter and 38 cm High.''Tonic Beer Manuafactured By D. Oswald Eaglehawk.''food technology, bottling, soft drink bottle

This glass ginger beer bottle was manufactured and used early to late 1900's, until the time that cheaper containers were invented(plastic bottles). This bottle was so constructed to be easily moved within the ginger beer processing plants from the brewing vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1990s the bottle slowly became phased out of production however boutique suppliers still preferred thick glass to contain any explosive action. Two major glass bottle works companies, e.g. Australian Glass Manufacturers and the Melbourne Glass Bottle Works Co. were the main suppliers for the Victorian State.In the period when this bottle was manufactured and used the major ginger beer brewing plants for the whole of Victoria were located in Melbourne because this was where its greatest consumer base was there and most rural areas were supplied by domestic sources (mother brewing ginger beer for the children). The Kiewa Valley and its region was one rural area which until road invrastructure was enhance covered the ginger beer thirst by local family production. As the population expanded considerably in the late 1940's (SECV Hydro Scheme) with a greater demand for "soft" drinks" being established supplies from larger towns and cities were call for. Each bottle was "branded" during manufacturing to show the contents were from a reputable supplier (PHIBBS Bros) and where it originated from. These bottles were recycled by the manufacturer as a way to cut production costs. This method of recycling the bottles back to the specific manufacturer has (except for South Australia)been overtaken by a no cost recycling collection by councils (funded by their communities). This method by passes the user cost principle as the bottles are processed as non generic. The uneconomical "on cost" which was replaced by the "throw away" less costly plastic containers however did not provide the keen domestic brewer of the "beer" with a reusable bottle.This heavy gauged glass bottle (Ginger Beer) has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottled along the production line. The method of pouring ginger beer into the bottle has been part of the "production line" process of automation. This bottle has a capacity to hold 250ml of ginger beer and is made from "clear" glass. The marority of ginger beer bottles produced in this time frame where made with a "green" tint in them.This tinting helped reduce the sunlight effecting the contentsAround the bottom side of the bottle and blown into the glass is "THIS BOTTLE IS THE PROPERTY OF PHIBBS BROS, ALBURY" above this, in "running script" and sloping up from left to right is "Phibbs Bros" and underneath parallel to it "ALBURY". On the base of the bottle is molded a big "L 289" underneath this "M" and below this "AGM".ginger beer bottle, soft drink bottles, cordial bottles

Oswald-Eaglehawk Very large Green Champagne Style Bottle With Champagne Cork In The Mouth And A Remanant Of Silver Foil Remaining. The Bottle Is Broken Below The Neck, But Held Together Via Cellotape. Diameter 14 cm x Height 44 cm. The Bottle Has Three Circular Paper Labels. Each Label Contains The Words ''Tonic Beer Manufactured By D. Oswald Eaglehawk.'' The Label Background Is Dark Blue With White Lettering.''Tonic Beer Manufactured by D. Osewald Eaglehawk''food technology, bottling, ginger beer bottle

A small colourless bottle with cork and silver foil still in the mouth. The bottle is unbroken and has a circular paper label that contains the words ''Tonic Beer manufactured by D.Oswald Eaglehawk.'' The background of the label is dark blue with white lettering. The bottle at the base is 4.1 cm in diameter and 14 cm high. The base of the bottle has a stamp on it with the letters and numbers as follows: ''M 766 GM''''Tonic Beer manufactured by D.Oswald Eaglehawk.'' ''M 766 GM'food technology, bottling, soft drink bottle

This glass ginger beer bottle was manufactured and used early to late 1900's, until the time that cheaper containers were invented(plastic bottles). This bottle was so constructed to be easily moved within the ginger beer processing plants from the brewing vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1990s the bottle slowly became phased out of production however boutique suppliers still preferred thick glass to contain any explosive action. Two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co. were the main suppliers for the Victorian State. In the period when this bottle was manufactured and used the major ginger beer brewing plants for the whole of Victoria were located in Melbourne because this was where its greatest consumer base was there and most rural areas were supplied by domestic sources (mother brewing ginger beer for the children). The Kiewa Valley and its region was one rural area which until road invrastructure was enhance covered the ginger beer thirst by local family production. As the population expanded considerably in the late 1940's (SECV Hydro Scheme) with a greater demand for "soft" drinks" being established supplies from larger towns and cities were call for. Each bottle was "branded" during manufacturing to show the contents were from a reputable supplier (H Taylor) and where it originated from. These bottles were recyled by the manufacturer as a way to cut production costs. This method of recycling the bottles back to the specific manufacturer has (except for South Australia)been overtaken by a no cost recycling collection by councils (funded by their communities). This method by passes the user cost principle as the bottles are processed as non generic. The uneconomical "on cost" which was replaced by the "throw away" less costly plastic containers however did not provide the keen domestic brewer of the "beer" with a reusable bottle. This heavy gauged glass ginger beer bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottled along the filling production line. The method of pouring ginger beer into the bottle has been part of the "production line". This bottle has a one and a half pint capacity and is made from "light green" coloured glass(a protection against light penetration). This thick glass bottle, to contain ginger beer, required its thickness because of the extensive handling (man and machine) before final consumption. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck. Ginger beer was a "soft drink" of great demand. On the middle portion of this bottle is a large elongated circle within it and following the spherical line is "H. TAYLOR" ans a star separates this from "MELBOURNE" rounding out the bottom curviture. Within these words are the large initials "T H" . The "T" superimposed onto the "H". On the base and covering the whole bottom is the letter "T". At the opposite side to the manufacturers logo is "THIS BOTTLE CANNOT BE SOLD OR USED BY ANY OTHER PERSON & IS NOT COMPLETE WITHOUT STOPPER" glass bottle, non alcoholic drink, taylor ginger beer bottle, reuseable bottles

WAR Chiselett PTY LTD produces ginger beer in its Merbein's factory.small bottle with two colours brown and dark creamy colour at bottomGINGER BEER Heart shape insignia with bunch of grapes in the center: MERBEIN CORDIAL WORKS written around the heart and TRADE MARK near grapes W.A.R. CHISELETT PTY LTD written under heart ginger beer, cordial, war chiselett, merbein

No 1 Camp Garrison beer garden. The sergeant is from the Canteen Sgt's MessBlack and white photograph of the No 1 Camp Garrison Beer garden. Two hunts on the left of picture and and a partial glimpse of huts on the right. The huts are surrounded by gardens. In the centre of the garden is a table with two bench seats on either side. A man is standing off to the right of photo. A large tree behind him.camp 1, garrison, beer garden, sergeant, sergeants mess, canteen, tatura, danson

2-litre beer tankard decorated with Bayern coat of arms. Tankard a dark grey colour, and coat of arms in full colour with a lion on each side of the emblem.Bayern' underneath coat of arms, '2 L, gertz' imprinted on side. 'Original Gerzit. Gerz' stamped on base.domestic items, food and drink consumption, bayern, beer, tankard, coat of arms, stein

In an era when drinking beer was considered safer than drinking water, pubs were prolific and the centre of social and commercial life in Bendigo. (Bridgfoot,J. Taverns to Temperance: Pubs in Bendigo). While the Cohn Brothers and their 'tied hotels' and were one of the most successful brewers in the district, many smaller brewers also existed and the industry was a major source of employment. C.J. Glover or Charles Runting appear to have been in one of those.Oval beer bottle label. Multi coloured print featuring images of hops, a glass of ail, the Bendigo Coat of Arms and various font styles.Glover & Runting / Tonic Ale / Manufacturers / Chapel St / Bendigo / Vic Australiamaking a nation, city of bendigo commerce

This bottle was made in Epsom, Bendigo at the Bendigo Pottery Works. The bottle contained ginger beer manufactured at the cordials factory of J.S. Rowley at the corner of Timor and Banyan Streets, Warrnambool. John Searle Rowley (1837-1893) opened a branch of the Geelong Corio Brewery in Timor Street and in 1868 established a cordial manufacturing plant on the site. The brewery section closed and the cordial manufacturing section, called the Warrnambool Steam Aerated Waters works, was expanded, By the 1880s there were 13 employees and 20 varieties of soft drinks were being produced. After Rowley died in 1893 the business continued under the same name with Ralph Reeves managing the plant from 1900 until he moved to Koroit Street and operated a cordial factory under his own name. This bottle is of interest as an example of the soft drinks manufactured by J.S.Rowley of Banyan Street Warrnambool. This business was an important one in Warrnambool in the second half of the 19th century and early in the 20th century. This is a ceramic bottle in brown and buff colouring. The top has two chips. There is no stopper. ‘J.S. Rowley Hamilton and Warrnambool Ginger Beer’ ‘The Bendigo Pottery Epsom Bendigo’ j.s. rowley cordial manufacturer, cordial manufacturers in warrnambool, history of warrnambool

This bottle was used as a form of advertising for the Wodonga Business of Samuel Mason. Samuel Mason was born at Bethnal Green, a suburb of London in 1824. He came to Australia via California, landing in Sydney in 1847. After a return to the California goldfields Samuel returned to Australia, arriving in Albury, NSW in 1855. He opened a bakery in Albury, and also commenced the manufacture of ginger beer for which he gained a reputation across Australia. Mr Mason continued in business in Albury for some time, but he established himself in Wodonga c1857, continuing a branch business in Albury. Twice a month in the early days Mr Mason walked to Beechworth for the purpose of transacting business. Occasionally he was summoned to attend the Beechworth courts as a juror. In 1901 Mr Mason retired from business, handing over the reins to his only son, Mr Samuel Mason Jr. who continued the aerated water business for some years. In about 1920 the business changed hands, being take over by E. Bartel. Samuel Mason Sr. died on 6 April 1908 and is buried in Wodonga. Mr. Mason Jr. was a prominent townsman. For some years he was a councillor of the Town Riding of the Wodonga Shire Council. He was also the first chairman of the Wodonga Water Trust in 1908. Samuel Mason Jr. moved to Melbourne in March 1920, primarily due to failing health. He died on 6 February 1929 and was interred in Melbourne.This bottle has strong local significance as it is representative of one of the earliest businesses established in Wodonga in the 1850s which operated until c1920. The business continued after 1920 under different ownership and names.2 earthenware pottery bottles manufactured by Bendigo Pottery and imprinted with the business brand of S. Mason, Wodonga. One bottle still contains a marble as part of the Codd sealing system to prevent gas from the ginger beer seeping out and the drink going flat. The bottles Within two elliptical circles are painted (in freehand) "S. MASON" in the top half and "WODONGA" in the bottom half. These are separated by an asterisk on both sides. A large "S" overlaid by a similarly large "M" is within the inner circle. 2nd bottle also includes "BREWED GINGER BEER" above the brand. At bottom of bottle 1 "PINNACLE BRAND" At bottom of bottle 2 in an oval shape: "THE BENDIGO POTTERY CO./ EPSOM/BENDIGO"s. mason wodonga, aerated drinks, bendigo pottery

Beer came in bottles sold at licensed premises either locally or in larger cities visited during shopping expeditions. The shape of the bottles changed. Bottles were recycled remaining the property of the manufacturer who paid for their return. History of the Richmond Brewery.Historical: Change of bottles - shape, glass, embossing. Collected by bottle collectors. Aesthetic: Display showing embossing & shape especially if in good condition.Clear brown bottle with heavy embossing. The bottom half has straight sides. The top tapers to the opening. Half way up the sides it is heavily embossed with R.B. and underneath these letters R. The face of a tiger features in heavy embossing on the side of the bottle. At the bottom around the circumference and on the base is embossing. There is a broken cork sealing the bottle. Sides: R.B. and underneath this R. with a head of a tiger. Bottom around the circumference: 'The property of Richmond N.S. Brewing Co. Pty. Ltd.' Base: '650'beer, drink, bottle, richmond brewery, richmond

Joan O'Shea Collection. Central Deborah Gold Mine Bendigo. Promotional material. Chronological History, Poppet legs and shaft, Change Room, Caretakers or rag pickers room, Drying room, first aid room, carbide light room, Underground, carpenters shed, ore bins and loading bays, stamper battery, wilfley table, berdan pans, laboratory, display room, boiler, stroke hold, winding engine, boiler feed pump, electric driven compressor, steam driven compressor, blacksmith's shop.Photograph Courtesy Philip Beer.mining, marketing, central deborah mine.

Stephens Bros. of Wodonga were established c1938, having taken over the aerated water and drinks business previously operated by Messrs. E. Bartel and E. Clark. Bartel and Clark had purchased S. Mason Cordial Company from Samuel Mason Jr. in 1920. Samuel Mason Sr. began a bakery and aerated water company c1857. Stephens Brothers was operated by Lindsay, Donald and William Stephens. In 1947 they manufactured their own cement bricks to build a new factory in High Street, Wodonga. Over time they operated under various names including the Wodonga Cordial Company and Belvoir Wodonga Cordial Company. In 1938 their output of aerated waters was 100 dozen bottles a day but by 1948 that had doubled. In 1949 they also established a wood yard at their High Street premises to provide additional income during the slower winter months. In 1966 the company was purchased by the Tarax Ale Brewing Co. with Lindsay Stephens staying on as Company Manager.These artefacts has local significance as they are representative of a well-known Wodonga manufacturing business.2 bottles for beverages produced by Stephens Bros., Wodonga. One is a taller brown bottle bearing the label of Stephen Bros Old Style Hop Beer. The second clear glass bottle is smaller and has the brand name embossed into the bottle.Label on brown bottle : "STEPHENS BROS/ WODONGA :: PHONE 39 /OLD STYLE / HOP BEER/ PRESERVATIVE ADDED" Embossed on clear glass bottle : On side: STEPHENS BROS WODONGA Around base of clear bottle: "THIS BOTTLE ALWAYS REMAINS THE PROPERTY OF STEPHENS BROS. WODONGA"stephens bros wodonga, wodonga cordial company, cordial companies wodonga, belvoir drinks wodonga, aerated drinks, hop beer

Australian Soldiers Pocket Book Plus photos and 2 Japanese notes.Photographs of beer signs taken in WW2.

RAA (AACC) souvenir beer mugRAA Badge AACC Badgeraa, mug

.1) White beer tankard with 3 depictions of WW1 actions in brown. .2) White beer tankard with 3 depictions of action in Korea in brown.On the base of both, “ RSL Logo then Franklin mint PTY LTD 1983 FM Made in Australia”tankards, commemorative, military

Bendigo Bitter Beer Label. Oval shape, gree, red and yellow. Bendigo Bitter Beer on label. Brewed and bottled Bendigo, Victoria Australia.

Glasses are from Dixon's Hotel, now the Commonwealth Hotel in Orbost. Laura Dixon held the hotel licence from 04/04/10 until 05/02/17.The Commonwealth Hotel opened New Year's Day 1901. Mr Jasper Drew held the first licence. It still stands today.Three beer glasses - assorted shapes and sizes.Two glasses - Dixons Hotel One - ULVA New South Wales Glass regulation 5commonwealth-hotel dixon-laura glassware beer-glasses

Beer Bottle with top cut off and engraved.Around the bottom of bottle-THIS BOTTLE ALWAYS REMAINS THE PROPERTY OF THE MANUFACTURERS BOTTLE CO. VICTORIA PTY.LTD. Engraved on side of bottle-The "Lady Blamey" 9th Aust Div.- April 1940 - 80 7 Div Cav Regt 8 " " " 9 " " " 9 " " C'do