Showing 898 items
matching blacksmith,
-
Orbost & District Historical Society
black and white photograph, August 1897
This photograph shows Nicholson Street, Orbost with horse teams in front Of Borland's Blacksmith shop and Royce's Bakery net door in August 1897.This is a pictorial record of the main street of Orbost in the late 19th century.A black / white photograph of the main street of Orbost. The road is unsealed. There are several wooden buildings facing the road and a cart with a team of horses is standing outside the blacksmith's building. A small child is standing behind the cart and several men are outside the bakery.on front - Orbostnicholson-street-orbost orbost-township borlands-blacksmith royces-bakery main-street-orbost -
Tarnagulla History Archive
Photograph of blacksmith's shop, Tarnagulla, Blacksmith's shop, Tarnagulla, c. 1960
Murray Comrie Collection. This photograph shows the blacksmiths premises on the north end of Commercial Road, Tarnagulla. Information collated by Murray Comrie: This building was demolished in the 1970s. The first use of the site was as the George Hotel licensed to an A.B. Clay in 1858, then Waller and Robinson. Charles Waller operated his Excelsior Line of coaches from the George Hotel stables. John Ousley took over the stables for use as a blacksmith's shop. He sold out to Stafford & Sons in 1908. Staffords found the existing premises at the George Hotel too small and built this building. Frank McNamee later took over the premises and operated it for many years. This photograph is a reasonable copy created from an older original. Copy probably made by Murray Comrie in the 1970s. Monochrome photograph depicting a large run-down weatherboard building at the north end of Commercial Road, Tarnagulla. Written in a sign on right side of building: 'Blacksmiths'. Same as image THA-2019.0053tarnagulla, commerce, industry, blacksmithing, smithing, coachbuilding, businesses, stafford & sons, norwood, mcnamee, buildings, hotels, horses, stables, commercial road, main street -
Flagstaff Hill Maritime Museum and Village
Vice, 1800s
A wheelwright’s spoke vice was used to hold the wheel hub firmly while the spokes were hammered into the wheel hub, then the spokes would be joined to the wooden wheel felloe before finally the metal flat tyre, or later the rubber tyre, would be attached to the felloe. A wheelwright’s spoke vice would have been very necessary for blacksmiths circa 1800s-1920s as it would have been used in the manufacture and repair of carts, wagons, coaches and other horse-drawn vehicles. This wheelwright’s spoke vice was once used by Harry Goodall of H. Goodall & Sons Pty. Ltd. corner of McKinnon and High Streets, Terang. Victoria. Henry Goodall & Sons Henry Goodall (1870-1936) was proprietor of garages as H. Goodall & Sons Pty. Ltd., at both Terang (McKinnon and High Streets) and Mortlake (Dunlop Street). His business was in operation in at least in 1916 and perhaps well before, considering the date of the tyre bender and its use for wagons with wooden wheels. It was still in operation in 1953, chasing up debtors in Mount Gambier Court. Amongst the employees of H. Goodall & Sons Pty. Ltd. was Ernie Entwistle, a blacksmith (a soldier who died in 1916) and Alfred Hodgetts, radio expert (killed in a fatal accident in 1943, when he was in his early 30s). Henry Goodall was involved in the community as a Justice of Peace, a deputy coroner, President of the Mortlake Hospital, trustee of the Soldiers’ Memorial Hall, and as a prominent Freemason. He and his wife had two sons (Charles and John) and one daughter (Mrs. Chas. Newton, of Skipton). The wheelwright’s spoke vice is significant as it demonstrates how blacksmiths or wheelwrights could make new metal rims for wagon wheels for carts, wagons, stage coaches and carriages over a 135 years ago. The machine is a part of our social history as it demonstrates part of the process of making wagon wheels, which played an important part in aiding the continuation of daily transport needs that people had at the time, such as farming, personal transport and commercial activities. The tool is locally significant as it was used by a local company in Terang and Mortlake in their blacksmith, wheelwright and garage business. Vice; wheelwright’s wheel spoke vice. Manufactured in 1800s. This was once belonged to Harry Goodall & Sons, blacksmith's of Terang. Victoria.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, machinery, wagon wheel, steel rim wheels, henry goodall (1870-1936), terang, wheelwright tool, blacksmith trade, blacksmithing equipment and supplies, h. goodall & sons of terang, terang blacksmith, h. goodall & sons pty ltd, mortlake, ernie entwistle blacksmith, alfred hodgetts radio expert, charles goodall, john goodall, wheel hub, wheel spoke, wheel felloe, wheel tyre, wheel tire -
Whitehorse Historical Society Inc.
Document, Burwood East Primary School
History of the school, from its start in 1861 to its recent upgrade of 1996.History of the school, from its start in 1861 to its recent upgrade of 1996. With brief description of Tally Ho Inn and nearby blacksmith; Photocopied 'Certificate of Sufficient Education' 1875; Photocopied Note of Admission 1887; 1909 Department of Education Curriculum advice letterHistory of the school, from its start in 1861 to its recent upgrade of 1996.tainton, william richard, burwood east primary school no. 454, burt, william, tweedie, james marshall, narmara primary school burwood east, parsons, william, mcclelland, thomas robert -
Stawell Historical Society Inc
Memorabilia - Realia
Large Blacksmithing Filestawell -
Hand Tool Preservation Association of Australia Inc
Brace bit
This item is part of the Thomas Caine Tool Collection, owned by The National Trust of Australia (Victoria) and curated by the Hand Tools Preservation Association of Australia.brace bit, blacksmiths -
Hand Tool Preservation Association of Australia Inc
Drill
This item is part of the Thomas Caine Tool Collection, owned by The National Trust of Australia (Victoria) and curated by the Hand Tools Preservation Association of Australia.drill, blacksmiths post -
Churchill Island Heritage Farm
Photograph - Photograph of two men
Churchill Island Heritage Farm has a large photographic collection dating from the nineteenth century to the modern day.Colour photograph of two men standing against a white clapboard building, leaning on a large wooden wagon wheel. They are wearing matching hats, white shirts, and vests.SALTY + HANK/(BLACKSMITHS) [written on reverse in pen]churchill island, photograph -
Glenelg Shire Council Cultural Collection
Tool - Blacksmith's Tongs, n.d
Port of Portland CollectionBlacksmith's tongs, forged steelport of portland archives -
Glenelg Shire Council Cultural Collection
Tool - Blacksmith Tongs, n.d
PORT OF PORTLAND COLLECTIONBlacksmith's tongs - hand forgedport of portland, trade, industry, blacksmith -
Glenelg Shire Council Cultural Collection
Tool - Blacksmith's Tongs, n.d
Port of Portland CollectionBlacksmith's tongs - forged, steel -
Glenelg Shire Council Cultural Collection
Tool - Blacksmith Tongs, n.d
PORT OF PORTLAND COLLECTIONBlacksmith's tongs, hand forgedport of portland, blacksmith, tongs, trade, industry, metalwork -
Glenelg Shire Council Cultural Collection
Tool - Blacksmith's Tongs, n.d
PORT OF PORTLAND COLLECTIONBlacksmith's tongs, forged steelport of portland, blacksmith, tongs, tool, industry, trade -
Coal Creek Community Park & Museum
Narrow Iron
Narrow iron, made by blacksmith -
Hand Tool Preservation Association of Australia Inc
Vice
This item is part of the Thomas Caine Tool Collection, owned by The National Trust of Australia (Victoria) and curated by the Hand Tools Preservation Association of Australia.vice, blacksmiths leg , 4" -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Tool - Gold-miner's Pick, Ballarat c 1920, c1920
This gold miner's pick from the Ballarat Goldfields c 1920 was donated by Mr David Hopcraft, a dealer at the Arkuna Market Berwick, Victoria in December 2010. When Gold was discovered in Victoria c1853 most of the labourers and some landowners left the market gardens and farms to try their luck on the goldfields. Local Blacksmiths made picks similar to this one for them. There was a great shortage of labour in Melbourne and at the same time, due to the huge influx of people lured by the Gold, there was an increased demand for food. The market gardeners were getting very good prices for their produce and many increased their wealth considerably and many of these tenant farmers were able to purchase their blocks of land and live a profitable life. There was such a shortage of labour that J.B.Were applied for Irish immigrants to work the farms. This pick is an example of the hand made tools many pioneers took with them when they abandoned their farms and market gardens in the District of Brighton to try their luck at prospecting when gold was discovered in Ballarat and Bendigo c1853. Some were successful , most were not and retuned again to the hard life of farming. A forged steel pick with a wooden handle. The steel pick-head was hand-forged by a blacksmith. This miner's pick was used on the Ballarat gold-fields c1920gold mining, ballarat, bendigo, early settlers, market gardeners, moorabbin, bentleigh, mining equipment, gold rush, immigrants, blacksmiths, forges, tools -
Bacchus Marsh & District Historical Society
Photograph, Timmons. Clothier and Draper. Victoria House. 1883
This building was part of a range of shops known as Victoria House, built by Vere Quaile, blacksmith, in 1857. It consisted of a shop, a blacksmith's forge and wheelwright, and was located to the east of the blacksmith's forge in Main Street. Between 1874 and 1892 Francis Timmons operated a clothier and drapers business in this building.Small sepia unframed photograph on card with gold border framing photograph. The name of the business can be clearly seen above the awning. Less clear is the name "Victoria House', also above the awning. Housed in the album, 'Photographs of Bacchus Marsh and District in 1883 by Stevenson and McNicoll'.On the front: Stevenson & McNicoll. Photo. 108 Elizabeth St. Melbourne. COPIES CAN BE OBTAINED AT ANY TIME. On the back: LIGHT & TRUTH inscribed on a banner surmounted by a representation of the rising sun. Copies of this Portrait can be had at any time by sending the Name and Post Office Money Order or Stamps for the amount of order to STEVENSON & McNICOLL LATE BENSON & STEVENSON, Photographers. 108 Elizabeth Street, MELBOURNE. In handwriting: 'Victoria House'. Clothier + Draper. Main St. c.1857. Next to Blacksmith Cottage. Courtesy Mrs. Jeremeas. Photo 1883.stevenson and mcnicoll 1883 photographs of bacchus marsh and district, shops bacchus marsh vic., clothing shops, drapers bacchus marsh vic -
Glenelg Shire Council Cultural Collection
Tool - Blacksmith Tongs, n.d
Port of Portland CollectionBlacksmith's tongs - hand forged, steel.port of portland -
Glenelg Shire Council Cultural Collection
Tool - Blacksmith Tongs, n.d
Port of Portland CollectionBlacksmith's tongs, hand forged, steel.port of portland -
Glenelg Shire Council Cultural Collection
Tool - Tongs, blacksmith, n.d
PORT OF PORTLAND COLLECTIONBlacksmith's tongs, hand forged, steelport of portland collection, trades, blacksmith, tools, tongs -
Glenelg Shire Council Cultural Collection
Tool - Blacksmith's Tongs, n.d
PORT OF PORTLAND COLLECTIONBlacksmith's tongs, hand forged, steelport of portland, blacksmith, trade, industry -
Glenelg Shire Council Cultural Collection
Tool - Blacksmith's Tongs, 1900s
Port of Portland Collectionport of portland archives -
Churchill Island Heritage Farm
Functional object - Paling/shingle cutting blade
The cutting blade was used to cleave timber apart into shingles or palings. A haft (handle) would have been attached through the socket giving the tool an L shape. The base of the blade is driven into the timber with a mallet forcing timber into two parts along the grain. Twisting the haft then levers apart the two pieces. This can be repeated until several long strips of timber have been cut from a log. Also called a frow or froe. This tool allowed more accurate and controlled splitting over an ordinary axe and required less force.well used blacksmith made. No handlepaling, shingle, cutting, blade, tool, tools, churchill island, farm -
Arapiles Historical Society
Tongs
Farm equipment, metal tongs for blacksmithingtongs, blacksmith, blacksmithing -
Hand Tool Preservation Association of Australia Inc
Plastic envelope
This item is part of the Thomas Caine Tool Collection, owned by The National Trust of Australia (Victoria) and curated by the Hand Tools Preservation Association of Australia.plastic envelope, bits, blacksmith, 11 -
Flagstaff Hill Maritime Museum and Village
Craft - Ship Model, S.S. Rowitta, after 1975
This remote-controlled ship model was made by the blacksmith at Flagstaff Hill Maritime Village in the likeness of the Village's display passenger ferry, the S.S. Rowitta. SS ROWITTA: - The 1909 steam ferry, SS Rowitta, was installed as an exhibit at Flagstaff Hill in 1975 and was enjoyed by many visitors for 40 years. Rowitta was a timber steam ferry built in Hobart in 1909 using planks of Huon and Karri wood. She was a favourite of sightseeing passengers along Tasmania’s Tamar and Derwent rivers for 30 years. Rowitta was also known as Tarkarri and Sorrento and had worked as a coastal trading vessel between Devonport and Melbourne, and Melbourne Queenscliff and Sorrento. In 1974 Rowitta was purchased by Flagstaff Hilt to convert into a representation of the Speculant, a historic and locally significant sailing ship listed on the Victorian Heritage Database. (The Speculant was built in Scotland in 1895 and traded timber between the United Kingdom and Russia. Warrnambool’s P J McGennan & Co. then bought the vessel to trade pine timber from New Zealand to Victorian ports and cargo to Melbourne. She was the largest ship registered with Warrnambool as her home port, playing a key role in the early 1900s in the Port of Warrnambool. In 1911, on her way to Melbourne, she was wrecked near Cape Otway. None of the nine crew lost their lives.) The promised funds for converting Rowitta into the Speculant were no longer available, so she was restored back to her original configuration. She represented the importance of coastal traders to transport, trade and communication in Australian times before rail and motor vehicles. Sadly, in 2015 the time had come to demolish the Rowitta due to her excessive deterioration and the high cost of ongoing repairs. She had given over 100 years of service and pleasure to those who knew her. The remote-controlled model of the S.S. Rowitta is significant for its association with the Tasmanian early to mid-1900s passenger ferry, the wooden screw steamer Rowitta. It is is connected to the history of the Rowitta, that was a large exhibit on display at Flagstaff Hill Maritime Village from the museum’s early beginnings until the vessel’s end of life 40 years later. The display was used as an aid to maritime education. The Rowitta represents the importance of coastal traders to transport, trade and communication along the coast of Victoria, between states, and in Australia before rail and motor vehicles. The vessel was an example of a ferry built in the early 20th century that served many different roles over its lifetime of over 100 years. Model of the wooden steam ferry "S.S. Rowitta". This is a radio-controlled model built by the Flagstaff Hill blacksmith.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ship model, remote controlled steam ship model, s.s. rowitta, tarkarri, speculant, purdon & featherstone of hobart, passenger ferry 1909, tasmanian passenger ferry, vessel, charles street wharf launceston, sorrento, remote control boat, rowitta model, remote-controlled model -
Tarnagulla History Archive
Photograph of the north end of Commercial Road, Tarnagulla, North end of Commercial Road, Tarnagulla, c. 1909
Murray Comrie Collection. This photograph shows business on the north end of Commercial Road, Tarnagulla. From right: the brick Baptist Church (now private residence), Stafford's Blacksmith Coachbuilders and funeral/undertakers (since demolished), & Norwood's Tarnagulla Hotel. Information collated by Murray Comrie: Stafford's premises were built on land previously occupied by the stables of the George Hotel. The Stafford's building was later taken over and run by Frank McNamee. This photograph is a dark copy created from an older original. Copy probably made by Murray Comrie in the 1970s. Monochrome photograph depicting the north end of Commercial Road, Tarnagulla. A large wagon with team of horses is standing in the road. Three girls are walking down footpath at left side of image.Written on the original: 'Specially produced for Renshaw & Co' and 'Commercial Road (North End) Tarnagulla'. Written on this copy: 'Baptist Church Staffords Blacksmith Coachbuilders and funeral/undertakers, & Norwood's Tarnagulla Hotel'.tarnagulla, commerce, industry, blacksmithing, smithing, coachbuilding, businesses, stafford, norwood, mcnamee, buildings, hotels, churches, commercial road, main street -
Glenelg Shire Council Cultural Collection
Tool - Blacksmith's Tongs, n.d
Port of Portland Collection -
Churchill Island Heritage Farm
Mortice axe
Modern handle. Blacksmith made. some pitting.Long V decoration along head. -
Whitehorse Historical Society Inc.
Photograph, Schwerkolt Cottage, 30/12/1993
Coloured photo of Schwerkolt's Cottage and Blacksmith's Shedjones, shirley, schwerkolt cottage