William Smellie’s straight forceps are one of the most significant pairs of forceps in the Museum collection. William Smellie (1697– 1763), designed these forceps, which were an improvement on the forceps of that time. These forceps were easier to use being shorter and lighter, particularly in the handles, with pelvic curve shaped blades. He invented a locking device for the two blades. The blades were lined with leather and greased with hog’s lard for the ease of delivery and the greater comfort of the patient, this being in the era prior to an understanding of sepsis and the need for surgical hygiene.Smellie was groundbreaking in his understanding of Childbirth and became an influential teacher of Obstetrics. He diligently studied the birthing process, particularly the descent of the baby’s head down the birth canal. His observations lead to him noting that many deaths occurred because of a lack of understanding of this process and the inappropriate handling of forceps. Smellie is generally given the credit for improving the forceps to make them easier to use and less likely to damage the baby. Smellie’s "Treatise on the Theory and Practice of Midwifery" was published In 1751 and became a widely influential teaching resource. Copies of this birth atlas are held in the Frank Forster Library, RANZCOG. Smellie's obstetric forceps. Iron forceps with traces of leather on the two blades. The blades touch at the tips when the blades are fully closed. The handles have a metal sheet coating and would also have been covered in leather originally. There is a notch at the centre to lock the blades in place. Noneobstetric delivery, william smellie

This medical / hospital instrument was used in the Tawonga District General Hospital which was built in the 1950s specifically for the increase in population due to the Kiewa Hydro Scheme.Historically Significant: Shows the development of scientific hospital equipment. Provenance: Used in the Tawonga District General Hospital which was remote and therefore required good equipment. Good condition and good interpretation capacity.Steel instrument - handle wide with gentle curve. Blade short, thin, flat and sharp with some rust.H.A.T.MELB. on handle Some rust on blade.medical equipment. hospital equipment. tawonga. mt beauty. hospital. medical. knife. nurse. doctor.

German bayonet commonly brought back by returning servicemen as a souvenir and passed to a regimental collection in later years.Part of a collection of edged weapons gathered by the regimental collection.German bayonet with wooden handgrip in metal scabbard; 365mm blade with saw-toothed back .On scabbard and blade - " WAFFENFABRIK MAUSER AG OBERMDORF "military, weapon, german

Only known one is in the Museum of New Zealand, Te Papa, Tongarew. Flensing Iron, also called a “Cutting Spade”, used in the whaling industry to cut the blubber. Has Scorrar London etched into blade"Scorrar London" etched into bladeflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, flensing, flensing iron, whaling, blubber, scorrar, cutting spade

Curved laryngoscope blade with light bulb only. Etched on the base of blade is engraved the word 'Whittam'. It has visible and deep scratches on top of its blade and back side. Also has on the edge of the blade a spot of oxidation and some green paint stains under the blade surface. Visible oxidation is present in the blade base back side over the small lamina attached by a screw. Engraved the presumably owner's name, Whittamlaryngoscope, blade, light bulb, curved laryngoscope, glass, whittam

Saw used in the RVIB workshop. It has wide teeth on one edge and narrower teeth on the opposite side of the blade. The handle is made of resin with three rivets holding the handle to the blade.1 metal saw with wooden handle and dual bladesroyal victorian institute for the blind, employment

Owned by Captain J. Pardew and brought out from England by his son, Mr E.J. Pardew in about 1893.A silver dress sword and scabbard. It has a large metal handle and hand guard. The blade is engraved with a crown and other decorations.On blade- Proo Rifle Volunteers Molesword weapon arms dress-sword

A weapon issued to Ghurka servicement. Often purchased as a souvenir by returning servicemen from Southeast Asia and later donated as a Mess decoration.Representative of souvenirs from WWII.Large knife with inward turned blade traditionally carried by Gurkha soldiers. Sheath is wood covered by leather. Includes two much smaller knives which fit into the top of the sheath.Blade is engraved with decoration.kukri, gurkha

A stainless steel table knife with a bone handle used for main meals by early settlers in Moorabbin Shire c1900. Most early settlers brought their cutlery with them when they traveled from England and Europe.A typical table knife used by settlers in Moorabbin Shire c1900A kitchen table knife with stainless steel blade and bone handle on blade; FL..........& CO. LTD. SHEFFIELD / TRADE 'SHREWSBURY' MARK / STAINLESS / ............cutlery, stainless steel, sheffield, england, early settlers, market gardeners, moorabbin, cheltenham, bentleigh, moorabbin shire,

Metal razor with ornate metal handle and blade.On razor : Gem. Made in England. Gem British Made. On blade : Made in England. Duridium.

Complete Macintosh laryngoscope piece with a curved large sized attached blade with light bulb and a textured handle with serrated grip for easy of use and a screw in the blade connector. The handle is also a battery deposit to supply the led light bulb. The blade has general scratches on its surface because its use. At the back of the blade is still attached the curved lamina as holder of the base with the blade in its regular use position. Several engraved and stamped inscriptions are present all over the handle and blade (see inscriptions for details). Stamped on the base of the blade, BOC Stamped on the edge of the back side blade, STAINLESS Stamped on the back side blade base, MADE IN ENGLAND Engraved at the base of the blade attachment place, MAINLAND Engraved at the edge of the serrated grip of the handle, Alfred Anaes Stamped at the base of the handle, REGD TRADE MARK / P E N L O N / MADE IN ENGLAND Stamped at the bottom of the handle base, REGD TRADE MARK / P E N L O N / MADE IN ENGLAND Engraved at the bottom of the handle base, AnaeA / ALFREDlaryngoscope, complete laryngoscope, boc, penlon, handle, alfred hospital, anaesthesia

Traditionally, a bow saw is a woodworking tool used for straight or curved cuts. A bow saw is a type of frame saw. Its thin blade is held in tension by a frame. In English and American vocabulary it denotes a toothed blade suspended between two long narrow handles called "cheeks" that are supported and separated by a thin stretcher in the centre of the handles, making a wide H shape (the cheeks form the uprights of the H, the stretcher the crossbar of the H). The blade is kept in tension with a turnbuckle or a twisted cord that runs parallel to the blade between the two cheeks but on the opposite side of the stretcher. If a cord is used, the cord is twisted with a toggle attached to one loop of the cord, adding tension. The toggle hits the stretcher, which keeps the cord from untwisting. A finer version of the saw uses a narrow blade (1/4" or less) with handles that allow the user to hold the saw and turn the blade. In this context it is also known as a turning saw[2] which is larger than a coping saw.Early settlers in Moorabbin Shire had to be self reliant and made their own clothes, tools and equipment as they established their market gardens and farms. A wooden Bow saw with tensioning string, toggle and bladetools, woodwork, metalwork, carpentry, pioneers, market gardeners, early settlers, moorabbin, cheltenham, bentleigh, ormond

A coopers turning or bow saw is a woodworking tool used for straight or curved cuts. A bow saw is a type of frame saw with a thin toothed blade that is held in tension by a frame with two long narrow handles called "cheeks" that are supported and separated by a thin stretcher in the center of the handles, making a wide H shape (the cheeks form the uprights of the H, the stretcher the crossbar of the H). The blade is kept in tension with a turnbuckle that runs parallel to the blade between the two cheeks but on the opposite side of the stretcher.An age old tool used for cutting timber for hundreds of years before the modern cross cut saws were invented. This design of saw was part of a Coopers tool kit and used in the production of making barrels. However this item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Bow saw wooden handle with metal bladeNonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bow saw, turning saw, coopers tools, cutting wood, sawing timber, coopering

The M7 bayonet was introduced in 1964 for use with the M16 rifle. It was issued to Australian troops during the Vietnam conflict 1962 - 1972.Part of a collection of edged weapons relevant to Victorian Colonial and Australian military forcesUS M7 bayonet , blade 170mm length, Plastic handle. Scabbard Green Plastic.On blade " US M7 Cometta " On scabbard " US M8 A1 "bayonet, vietnam war, m16

Item souvenired by Peter Dodd. Refer Cat No 2436.2P for his service details.Replica bayonet letter opener. Chrome with wooden handle. On blade under crossguard is plaque with large red number "1".Engraved on blade "1st Infantry Division in Vietnam".domestic items-writing equipment, military history-army, red

Bread knife with rising sun motif engraved/stamped on blade, below which is an inscription. Rounded handle.On blade of knife: "AUSTRALIAN MILITARY/FORCES" and "STAINLESS/STEEL"cutlery, dining, mess, australian military forces

Historic - Industrial - Timber Mill Saw BladesHistoric - Industrial - Timber Mill Saw BladesTimber Mill - Packet of Round Saw Blades made of steelHandle with Care A MSS Product 551 771 MI Melbourne Saw Manufacturing Co. PTY 107 Northern Rd West Heidelberg Vic. Ph 45-4133 puffing billy, timber mill saw blades, melbourne saw manufacturing co.

Object belonged to and was used by Dr Lennard Travers 1950-1970.Complete Macintosh laryngoscope piece with a curved medium sized attached blade with light bulb and a textured handle with serrated grip for easy of use and a screw in the blade connector. The handle is also a battery deposit to supply the led light bulb. The blade has general deep scratches on its surface and a slight metal deformation on top back of the blade. At the back of the blade is still attached the hinge that keeps in regular position the base and the blade, is also present a worn surface in this area. Green spots of dust and oxidation processes are present over the blade and the handle areas. A handle manufacturer stamp is located at the base of handle (see inscriptions for details).Stamped into base of handle: LONGWORTH INST. CO. / OXFORD / ENGLANDmacintosh, laryngoscope, blade, handle, longworth inst. co., england

A coopers turning or bow saw is a woodworking tool used for straight or curved cuts. A bow saw is a type of frame saw with a thin toothed blade that is held in tension by a frame with two long narrow handles called "cheeks" that are supported and separated by a thin stretcher in the center of the handles, making a wide H shape (the cheeks form the uprights of the H, the stretcher the crossbar of the H). The blade is kept in tension with a turnbuckle that runs parallel to the blade between the two cheeks but on the opposite side of the stretcher.An age old tool used for cutting timber for hundreds of years before the modern cross cut saws were invented. This design of saw was part of a Coopers tool kit and used in the production of making barrels. However this item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Bow saw wooden handle with metal blade missingNonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bow saw, turning saw, coopers tools, cutting wood, sawing timber, coopering

Straight razor in case. (00955/1). Blade of razor made by Cadman & Sons, Sheffield. Blade folds away into plastic handle. Case carries Crown & Sword branding [note: this is a different company altogeher] (00955/2).[on case] Crown & Sword Razor / Guaranteed [on blade] Made in England expressly foir G Peart / Tobacconist / Mildura [on blade handle] Cadman & Sons, Sheffield, England / logo BENGALL. crown & sword - g peart, mildura, cadman & sons, sheffield

Rare VMR SwordBritish pattern 1908 cavalry sword with blade 845mm long and engraved blade. Steel handguard engraved VMR with composition handle. Leather scabbard with brass fittingsBlade. Scroll work with VMR in centre " Henry Wilkinson, Pall Mall, London. Handguard " VMR"weapon, sword, vmr, british, wwi, world war one

A two sided pruning saw blade has a top cutting edge used for making an undercut of a limb while the bottom cutting edge is used for regular pruning. One side of the blade has very coarse, irregularly sized teeth for cutting quickly through large branches. The other side of the blade has fine teeth for making clean cuts on small branches and dead wood.This tool is an example of an early pruning saw commonly used in Orbost.Pruning saw with wooden handle and double sided toothed blade. The wooden handle is attached with three screws. The steel blade has teeth on both edges - small on one side and longer on the other.tool pruning-saw horticulture

The '24' inscribed on the handle is a theatre number for instrument identification. Invented by British obstetrician Robert Barnes (1817-1907), these forceps were designed to "enable delivery from the superior strait and from above the brim in cephalo-pelvic disproportion." One of Barnes' aims with this design "was to reduce the incidence of craniotomy, because the Caesarean operation was at this time a desperate last resort." (Source: Forster, F M C. (1971), Robert Barnes and His Obstetric Forceps. Australian and New Zealand Journal of Obstetrics and Gynaecology, 11: 139-147.) With the addition of William Neville's axis-traction handle (invented in 1886), a variation of these forceps known as the Neville-Barnes forceps gained widespread popularity.Set of metal forceps, consisting of two nickel plated blades with bakelite handles. Inscribed 'EVANS & CO./LONDON'.Theatre mark "24" inscribed on handle of both blades.obstetric delivery

A saw is a tool consisting of a tough blade, wire, or chain with a hard-toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power sources. An abrasive saw has a powered circular blade designed to cut through metal or ceramic. In ancient Egypt, open (unframed) saws made of copper are documented as early as the Early Dynastic Period, circa 3,100–2,686 BC. Many copper saws were found in tombs dating to the 31st century BC. Models of saws have been found in many contexts throughout Egyptian history. As the saw developed, teeth were raked to cut only on the pull stroke and set with the teeth projecting only on one side, rather than in the modern fashion with an alternating set. Saws were also made of bronze and later iron. In the Iron Age, frame saws were developed holding the thin blades in tension. The earliest known sawmill is the Roman Hierapolis sawmill from the third century AD used for cutting stone.The subject item is believed to date from around the mid to late 20th century and is regarded as a modern item. The maker is unknown but the pattern or design and type of wood used indicate it is a tool of modern manufacture. Compass saw blade with wooden with open handle blade attached with wingnut lever at side to adjust long narrow blade Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wood cutting, wood saw, cross cut saw, cabinet makers tools, wood working tools, tool

King Camp Gillette observed in 1902 that as existing, relatively expensive, razor blades dulled quickly and needed continuous sharpening, a razor whose blade could be thrown away when it dulled would meet a real need and likely be profitable. Safety razors had been developed in the mid-19th century, but still used a forged blade that dulled and rusted. In the 1870s, the Kampfe Brothers ( Germany) introduced a type of safety razor Gillette improved these earlier safety-razor designs, and introduced the high-profit-margin stamped razor blade steel blade. Gillette's innovation was the thin, inexpensive, disposable blade of stamped steel. Gillette's safety razor retailed for a substantial $5 half the average working man's weekly pay — yet sold by the millions. The most difficult part of development was engineering the blades, as thin, cheap steel was difficult to work and sharpen. This accounts for the delay between the initial idea and the product's introduction. To sell the product, Gillette founded the American Safety Razor Company on September 28, 1901 (changing the company's name to Gillette Safety Razor Company in July 1902). Gillette obtained a trademark registration (0056921) for his portrait and signature on the packaging. Production began in 1903, when he sold a total of 51 razors and 168 blades. The following year, he sold 90,884 razors and 123,648 blades, thanks in part to Gillette's low prices, automated manufacturing techniques and good advertising. By 1908, the corporation had established manufacturing facilities in the United States, Canada, England, France and Germany. Razor sales reached 450,000 units and blade sales exceeded 70 million units in 1915. In 1918, when the U.S. entered World War I, the company provided all American soldiers with a field razor set, paid for by the government, and as they were allowed to take them at discharge they continued their use of this product thus ensuring future sales. The company continues in the present day as the Gillette brand of Procter & Gamble, USA. Throughout the 20thC most men used this type of safety razor with disposable stainless steel razor blades to shave their beards prior to the introduction of affordable electric razors in 1960'sA blue packet of unused 'King Gillette' safety razor blades.on top of packet; Press with thumb / and snap end open / GILLETTE QUALITY THE / SAME THE WORLD OVER / FACTORIES IN / USA / CANADA , GREAT BRITAIN / MEXICO , FRANCE / COLUMBIA, GERMANY / BRAZIL, SPAIN / ARGENTINA, AUSTRALIA / GILLETTE TRADE MARK / KING C GILLETTE / RED. TRADE MARKS / GILLETTE (AUST.) PTY. LIMITED / MELBOURNE / DE 2023 / MADE IN AUSTRALIA / shaving equipment, safety razors, gillette king, proctor & gamble, moorabbin, bentleigh, cheltenham,

This pattern bayonet, which affixed to a .303 Lee Enfield rifle was standard issue to Australian forces in World War 1 ( 1914 - 1918 ), World War 2 ( 1939 - 1945 ) and the Korean War ( 1950 - 1953 ).Part of a collection of edged weapons relevant to Victorian Colonial and Australian Military forces.British pattern 1907 bayonet, with wood hand grips blade 430mm long, with leather scabbard with steel fittings and leather bayonet frog.ON handle " A- 93061 " On blade " 1 - 1922 Lithgow "wwi, wwii, korea, world war one, world war two, lee enfield

Cast steel straight edged blade affixed to a walnut handle with brass rivets. NONPARIEL [on plaque] [elephant trade mark on handle and blade] W.T. JACKSON SHEFFIELDtennon saw; churchill island; amess barn

Used in the 19th centuryA bill hook or axe-handled slasher which is an axe-handled forged metal blade with a strong curved sharp axe like edge and a straight secondary edge on the back. It has a broken wooden handle with steel or a tang which passed through the handle if it were still attached. There is stamped on the blade near the handle join - '2'. The original finish of the blade would have been, 'Japanned' which is baked black enamel. It was used to cut back scrub, small trees and woody vegetation in the 19th century.'2' stamped on the blade near where it joins the handle.slashers, cutting tools, bill hook slasher, gardening tools, agricultural tools