Ordinary candle holders and candles.

No specific information is available on this item but it was a common object in the past when candles were an important source of light in a house. Candle snuffers are also used in churches but these are usually larger in size. This item has no provenance and is in a poor condition but will be useful for display.This is a metal candle snuffer in a very rusted condition. It may have originally been silver. It has two scissor-like handles which open a lid which has a sharp edge which cuts off the top of the wick and extinguishes the flame. The pointed end of the item was also used to trim the candle and the snmall container behind the lid stored the wick pieces cut off. There is an embossed flower decoration on the handle and more decoration on the box area. There are three rests to allow the snuffer to sit on a surface.candle snuffer, warrnambool

Portable candleholders were commonly in use in Australian homes in the 1800s. Candles were very expensive in Australia and often were not available in stores. However, after 1850 the price of candles was reduced and they became readily available throughout Australia. Candleholders were popular as they protected furniture from hot wax. The dish around the candle stem collected the hot wax that could be reused later. When carrying the candleholder, the dish also protected the hand from the hot wax. This one was used by Helena Warren of Newmerella.The candle-holder is an example of an item commonly used before electric light came to the area.A white enameled candleholder which is a hollowed round, white, saucer shape edged in dark blue. In the centre there is a candle-holder on a short stem. It has a dark blue finger-grip ring on the side.lighting candle-holder

Spring loaded Candle Lamp candle stop, brass. Candle-stop has the words Wm. Blews & Sons Makers London for Palmers Patent Candles. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Enamel candle holder with candle used for light prior to gas and electricity. The candles were held in a circular holder to catch the drips of candle wax. Attached finger holder for carrying.candle holder

This printed tinplate candle holder appears to have been made in Australia from the middle of 1915 and was available for private purchase to Australian troops (including Light Horse) prior to their departure overseas in WWI. The purpose of the tin was to ensure the contents were kept dry and readily available. The lid also aided in shielding the direct flame of the candle.Used by Australian troops in WWIRectangular tin with hinged lid. The lid is illustrated with a coloured image of three Australian soldiers at camp (WWI era) with the words 'Camp Pocket Candlestick - A Soldier's Friend'. The border of the lid is decorated in a daisy pattern. The body of the tin is decorated in a monotone green tartan, with the base displaying a small panel entitled 'Patented 19-7-15 No 16856'. Inside the tin is coloured olive green, with a fitted pressed tin circular candle holder, located over a hole in the base, and a folded tin match holder. A half used white wax candle is contained within.Camp Pocket Candlestick - A Soldiers Friend Patented 19-7-15 No 16856candlestick, soldier's friend, camp pocket, wwi

For multiple candles

This is a high-quality item and would have been used in a household in affluent circumstances. The firm of James Dixon and Sons of Sheffield, England, was established in 1806 and ceased to operate in 1992. Candles were widely used for household lighting until the advent and availability of electric lighting from the 1920s onwards. This item has no known local provenance but is retained because it is fine example of a household item of the past.This is an electro-plated silver candlestick holder. The base is roughly circular (more hexagonal) with an embossed edge and a handle attached by welding. The candlestick holder is vase-shaped with a circular open top for inserting the candle. The circular top also has an embossed edge. Attached to the handle by a clip is a cone-shaped snuffer. The candle holder and snuffer have been used. On the bottom of the base are the name and symbol of the maker and five hallmarks. ‘Jas Dixon & Sons Sheffield’ ‘866 P W/B’ household lighting, history of warrnambool, silver candlestick, candlestick with snuffer

8715.1 - White moulded candle. 8715.2 - Metal candle holder with small ring to hold.

Gold bronze candle stick with opening spot for candle. Square bottom with circle design in middle.

Artie Dibbin, local Freeburgh identity, cattle grazier, horseman, miner and larrikin, had an alluvial claim, next to the Great Alpine Road at Freeburgh, called the "Goat's Arse". This candle holder or "spider" was used by Artie in this and other mines, including the Mount Orient.Relevant to the gold mining history of the area. Miner's spider made of bent metal.mining, candle, lamp, spider

Narrow cardboard box holding thin, long, white candles. Candles have a spiral shape on them. (See photo for details)candles, wax, denmark

Candle stick manufacturing moulds were extensively used throughout the Kiewa Valley and its regions to provide rural homes and businesses with illumination during times of limited light e.g. night time. These candles were used before the Kiewa Valley was placed of the electrical grid. The candles were made from parrafin wax. Before the 1920"s electricity was in limited supply due to the inability of the private electricity suppliers to service isolated rural regions. It was not until the Victorian State Government passed legislation (1920) to improve electricity supplies by forming the State Electricity Commission of Victoria (S.E.C.V.) Isolated rural communities could not meet the higher costs to have electricity supplies connected and therefore it was not until the 1950's that adequate domestic electrical power could be supplied.The isolation that the Kiewa Valley provided was of a greater hindrance to any utility (power,roads & telephone) where the cost per instillation was beyond the rural population's ability to pay either directly or indirectly. One of the benefits that the "closed" community of Mount Beauty had, when it was administered by the SECV was that some utility costs were a lot lower than that of the other settlements in the Kiewa Valley. This disparity led to a conference in 1928 of the rural and regional councils to demand from the Government an equality of electricity tariffs. This equality did not take place until 1965. The demand and usage of cheaper and affordable lighting that wax candles provided was for some rural families a way of life until the mid 1900's.This candle making mould is made from mild rolled sheet steel(tin). The top basin is rectangular in shape with beveled edges(facing in on all sides. There are six holes in the top basin for vertical hollow tubes to feed off. The six tapered cyclindrical tubes running from the top basin to the bottom raised platform base. All connections are welded together. The bottom of each cylinder has an opening for the candle wick. The wick is positioned in place before the molten wax is poured into the cylinders. A positioning ring has been welded to one bottom ring for stability.parrafin wax, candles, domestic household ighting

Blackout lantern used in WW11. This type of lantern was used during both World War. It is an artillery siege lamp and was originally used by artillery units. The lamps were powered by a single candle, the light being magnified by a lens. A shutter closes over the lens to give an illuminated vertical line. They were used originally in fortified siege artillery positions as a general purpose lamp. They were also used as aiming lamps when they were placed in front of artillery positions and used as a guide in aiming at night. These lamps were often used on the front of bicycles to guide at night. Donated by Clem Heather. Forestry Commision, carved faces on trees with axe., builder of tall. spliced single pole fire towers. This item is considered rare and important. It is historically and technically siginficant at a national level.Small black metal blackout lantern with handle. Front of lantern has round shield with small slit - small door at side for easy lighting of candle. It is hand held or placed on flat area, open base so candle can be inserted and 'screwed' in. Front is a magnifying glass and it has metal lens cover with vertical slit. lantern blackout ww11 military candle-power lamp

Candle Mould. Each with previous label from Mechanics Institute Eaglehawk #132. Tin mould for 12 candlescottage, miners, candle making

8480.1 - Squat wax candle.

Metal, Wax Candle Mouldstawell

Metal candle holder, cylindrical, open top and bottom, with metal spike attached. Used by underground miners. Candle holder was stuck into timbers or rock to provide light. Small stub of candle in holder. Wick fraying.gold mines, mining equipment, candle holder

Candle holder, white enamel, round with aperture at centre to hold candle dish catches wax. Object has handle on side.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Six slightly used wax candles Submarine inscription. maker Polly & Son 35 Septimus st, Erskineville, Sydney, NSW

Two wax candles, well usedcandles

Candle Holder (Enamel) with some chippingstawell

Cast iron candle wick trimmer.wick trimmers