It was the first Holden to incorporate the new "Red" engine, with a 7 main bearing crankshaft instead of the 4 main bearing crankshaft used in the "Grey" engine. The larger capacity 149 ci (2400cc) engine was first only sold attached to a three-speed manual gear box or the "Hydramatic" three-speed automatic transmission with a (column shift). Although the Controlled Coupling Hydramatic used in the EH was actually a four speed, it effectively worked as a three speed unit except at full throttle. The 179 ci (2900cc) engine was initially only sold with the "Hydramatic" three-speed. The first EH with a 179 ci engine and a manual gear box was called the "EH-S4", fitted with an up-graded manual gear box, with stronger gears than the 149ci gear box and an up-graded clutch. The three-speed manual (column shift) gear boxes had no synchromesh on first only second and third 'top gear'It was the first Holden to incorporate the new "Red" engine, with a 7 main bearing crankshaft instead of the 4 main bearing crankshaft used in the "Grey" engine. The larger capacity 149 ci (2400cc) engine was first only sold attached to a three-speed manual gear box or the "Hydramatic" three-speed automatic transmission with a (column shift). Although the Controlled Coupling Hydramatic used in the EH was actually a four speed, it effectively worked as a three speed unit except at full throttle. The 179 ci (2900cc) engine was initially only sold with the "Hydramatic" three-speed. The first EH with a 179 ci engine and a manual gear box was called the "EH-S4", fitted with an up-graded manual gear box, with stronger gears than the 149ci gear box and an up-graded clutch. The three-speed manual (column shift) gear boxes had no synchromesh on first only second and third 'top gear'Two tone, blue body and white roofon the boot of this car there is a 179 badge stating that this car was powered by the larger motor available. There was also a "Hydra-matic" badge showing this vehicle was fitted with an automatic transmission. Registered number 63454-Hholden, 1963 - 1965, car

Gas and Fuel Fashion,Food,Fitness. 3 females and 2 males on stage in gym gears dancing. Date and location unknown.event, social, gas & fuel fashion, food, fitness

black and white photo: winding gear in demolished engine house. On Back . ' Monument Hill Mine ' Roberts and Son winding engine'organization, business, monument hill mine

Date estimated from Ref. No. Note by T.H. Kneen 4 March 1992, "Ferguson tractor drawing modern (Auto) mist spraying plant. Operator wearing protective clothing. The prominent tree on the left is Cupressus macrocarpa planted 1857. Note also emergent Araucaria spp."Black and white photograph. Student driving a tractor in the Orchard in Spring. Automatic spraying machine on a trailor. Student wearing protective gear.On reverse, "Photograph by Information Branch Victorian Department Of Agriculture Ref. No. D1101 F."ferguson tractor, mist spraying plant, machine operator, protective clothing, cupressus macrocarpa, araucaria spp., student working outside, orchard, auto mist spraying plant, tractor, publicity

James Henry Steward (1817–1896) were opticians and scientific instrument makers and became established as J.H. Steward in London in 1852. He advertised himself as a “Head Optician” and on the 1st of February, 1913 became incorporated as J.H. Steward Limited. The company produced a large range of items for military use and advertised in their catalogs that they produced instruments for ‘reconnoitering, sketching, night Marching, signaling and gun Laying’. They were well thought of with their work to such a standard that they were made opticians to 'British & Foreign Governments, the National Rifle Associations of England, India, Canada & the Colonies and the National Artillery Association. An item that was produced in large quality by a well known maker who supplied the British military during the late 19th and early 20th century.Binoculars solid brass black covered with Green fabric around cylinders binoculars are complete with geared focusing and pull out lens hoods.Inscribed "The Duke Binocular"flagstaff hill, warrnambool, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, binoculars, the duke binocular, james henry steward, military maker, signaling, gun laying, optician

Plastic scale model of a WWII Spitfire aeroplane. Khaki in colour with random black markings. Coloured details. Moving propeller & landing gear.models, aeroplanes, spitfire, leisure

This photograph of a deep sea diver on board a vessel is connected to T. Ward. It was possibly part of E.G. Ward's Collection of diving equipment. The photograph was produced in the local town of Timboon. This photograph of an early 1900s diving suit shows part of the history of diving. It is connected to local history through the inscriptions on the back of the photograph; the printer and the name. The south west coast has hundreds of shipwrecks that have been discovered and explored by many divers. Their discoveries have led to us interpreting and understanding more about our history; ship building, exports, immigration, navigation and much more.Black and white photograph, portrait orientation, of a diver dressed in full diving gear standing on board a sailing vessel at sea. Inscriptions on reverse.Handwritten in black pen "T. WARD" Stamped in black ink "REPRODUCED BY" above rectangular stamp. Text within stamp "[K. TREGEA / CALLOWAY ST / TIMBOON VIC"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, photograph, diving gear, diving suit, deep sea diving, deep sea diver, diver, south west victoria, diving photograph, t ward, k tregea, timboon, marine technology, life saving

used for the preservation of leather harness gearImported and sold by Holden and Frost Circa 1900Silver drum with screw lid and soldered handle on top. Paper front panel with product information printed onequine, harness preservative, dressing

This drill once belonged to Goodall and Sons, who were blacksmiths in Terang. The smith was called upon to do a variety of work. In the early 1900s he was often the nearest person to be able to perform an engineer’s services for many miles around. The Dawn Ball-bearing Post Drill no. 611 is described in McPherson’s Catalogue as a “drilling machine with adjustable automatic feed, with improved Dawn coupler and ball-bearing thrust’. The heavy design of the flywheel enables it to maintain momentum” and is “fitted with pulleys for belt drive if desired” The hand crank drives an automatic feed to work off a cam-follow system opposite a large wheel. Made by Dawn Manufacturing Co. Australia 1920-1950. DAWN MANUFACTURING CO. Dawn Manufacturing Co. was founded in Coburg, Melbourne, in 1917 by the four Blake brothers, who were all engineers. After World War I Dawn was supplying drills Australia wide and the company was growing at a healthy rate. During the depression they remained busy, with employees working 60-80 hour weeks. Dawn was contracted to supply vices and clamps to the Australian Defence Department and munitions factory during the World War II. In 1959 the company was taken over by G.N. Raymond Group, then in 1973 the Siddons Ramset Limited acquired Dawn. In December 1991, Dawn became a unit of the United States owned Stanley Works Pty. Ltd. In November 1998 Dawn became 100 per cent Australian owned. HENRY GOODALL & SONS Henry Goodall (1870-1936) was proprietor of garages as H. Goodall & Sons Pty. Ltd., at both Terang (McKinnon and High Streets) and Mortlake (Dunlop Street). His business was in operation in at least in 1916 and perhaps well before, considering the date of the tyre bender and its use for wagons with wooden wheels. It was still in operation in 1953, chasing up debtors in Mount Gambier Court. Amongst the employees of H. Goodall & Sons Pty. Ltd. was Ernie Entwistle, a blacksmith (a soldier who died in 1916 ) and Alfred Hodgetts, radio expert (killed in a fatal accident in 1943, when he was in his early 30s ). Henry Goodall was involved in the community as a Justice of Peace, a deputy coroner, President of the Mortlake Hospital, trustee of the Soldiers’ Memorial Hall, and as a prominent Freemason. He and his wife had two sons (Charles and John) and one daughter (Mrs. Chas. Newton, of Skipton). The drill is locally significant as it was used by a local company in Terang and Mortlake in their blacksmith, wheelwright and garage business. It is an example of the tools of the blacksmiths’ trade in Victoria in the 1920s-1950s.Dawn Ball-bearing Post Drill no. 611, made by Dawn of Melbourne, model no 611. Hand operated drill press. Self-feeding blacksmiths’ drill-press. This drill once belonged to Harry Goodall & Sons, blacksmiths of Terang. Dated 1920s-1950s. Gear ratio 2:1 main drive, 6" diam, 3:1 reduction gear. "Dawn", "Melbourne"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, h. goodall & sons of terang, terang blacksmith, h. goodall & sons pty ltd, mortlake, ernie entwistle blacksmith, alfred hodgetts radio expert, charles goodall, john goodall, mrs. chas. newton nee goodall, terang 1900s, warrnambool district 1900s, post drill, blacksmith’s drill, dawn post drill, dawn ball-bearing post drill no. 611, blacksmiths, dawn of melbourne

George McCulloch was an inspector of machinery for the Western Australia Department of Mines. Brown hard covered book of 452 pages including illustrations and index. Contents include Design; Tail ropes; Winding from Great Depths; Colliery Winding; Electric Winding; Steam engine details, Drims; brakes; Clutches; Safety Devices; Winding ropes; Cages; Skips; Cage Safety Gear, Safety Cages; Cage Guides; Head gearsmining, winding, engines, steam engines, safety devices, winding ropes, cages, safety cages

ink on paper student's technical drawings .1) 2-speed and reversing electric drive for Olsen Tension Testing Machine .2) Lifting geartechnical drawing, mechanical engineering, p. kempe

Iron stand on which is fitted two wooden rollers which are rotated via gearing and a handle to squeeze water from clothes or to press them.24L on top of bowdomestic items, laundering

After scouring, the wool fibres are still tangled together. Carding untangles the fibres by brushing and straightening. The wool moves through a series of wire brush rollers that revolve at different speeds and in different directions to tease apart the wool. The fibres emerge from the machine as a continuous filmy web - called a sliver. The sliver must be thinned and divided into strands before the next process. Carding machines constantly require tuning. A highly skilled technician maintained and adjusted the speed of the rollers on the machine. This machine was developed by the CSIRO in the 1960s as a small-scale experimental machine. Industrial carding machines were four times the size of this one. Gold plaque on display with machine until 2018 read: G.H. Mitchell & Son, Adelaide have celebrated 125 Years of involvement with the Australian Wool Processing Industry by contributing the funds necessary to restore The Carding Machine, Noble Comb & The Gill Box. Also another gold plaque read: Experimental Carding Machine donated to The National Wool Museum by C.S.I.R.O Ryde has been rebuilt by Nick Sokolov of Comb Research & Development with the help of Bernard Tolan.Carder with small roller missing at coiling end. Driven by three horse power motor. Wooden slated feed table synchronised to overall gearing.carding machine, machines, wool industry, manufacturing, wool processing

Used to carry Cricket gear, circa 1900Cricket bag manufactured and sold by Holden and FrostLeather carry bag with straps and buckles, carry handles on top, canvas lining, metal key lockleather, cricket, bag

Blue A3 document (2 pages) with handwritten specifications attached (15 pages) On front, General Conditions of Contract for 'erection of a steam engine and winding gear for The Hercules & Energetic Co. Prepared by Wm Middleton, Engineer, Sandhurst. Handwritten document is specifications for carpenters work and erection &c of steam engine, boiling fittings and machinery for the Hercules & Energetic Goldmining Company Sandhurst. Specifications include details for boiler setup, engine bed, winding gear bed, soleplates, steam pipes, water elevator and piping, winding gear buildings, windows, rope rollers, flooring poppet heads.bendigo, mining, hercules & energetic mine

Photograph of Cooper sheaing machinery display at the Royal Melbourne Show, c1951.Photograph of Cooper sheaing machinery display at the Royal Melbourne Show, c1951.Classic Photos 64 Elizabeth Street Melbourne Display Cooper shearing gear and engines Royal Melbourne Show circa 1951 SA8shearing machinery, cooper engineering company pty ltd

Black and white photograph. Machinery consisting of large gear wheels, driving wheels with belts in wooden board lined room. Five males included. Rails along and across part of floor at waist height (safety?) Two sets of similar gear. Electric motors. Rubber belts driving machinery out of picture. Building clean - new? Electric lights and switches.topic, objects, machine, machinery, workers, males

D.Langshaw in turn out gear in front of a fire truck.black and white photographD.Langshawd. langshaw

black and white photo: winding gear in concrete base. RHSV Stamp/handwritten ' Nell Gwynne Reef' mine/winding engine/Walker & Coy. ' makers'Alan Doney (James Lerk, 10/2000 )organization, business, nnell gwynne reef mine

black and white photo, mine with A. Frame support, winding gear. Adult male at centre. On back, ' mine at Bendigo, 1920' ' 698' Little 180 mine ?organization, business, little 180 mine

Producer: Anira?Avira? Consultants Ltd.a. 24 numbered slides on the care and use of a tractor and chainsaw. b.20 numbered slides on the safety gear and use of chemical sprays. Prepared for VCAH Burnley.vcah, burnley, use of machinery, use of chemical sprays, tractor maintenance, chainsaw maintenance

This gear bag was issued to Sergent Harold Loraine Reed, who was born in 14 Aug 1889 in Portland, Victoria. Reed enlisted in the army in 1940 in Ballarat to serve in WWI, and was discharged from 8 Battalion in 1943. Gear bags such as this were standard issue to servicemen. Soldiers would fill their gear bags with essential equipment (mess tins, clothes, etc.) and carry them with them from post to post, or ship them to their destination ahead of time.Khaki coloured canvas bag that is cylindrical in shape with the owner's rank, name, and service number written on the front of the bag in white paint. The base of the bag is rounded, while the top is open with 11 eyelets (one missing) through which a cotton cord has been threaded. Each end of the cord has been wrapped with red tape.V58131 / S/Sgt. H.L. REEDmilitary equipment, duffle bag, barracks bag, kit bag, wwii, second world war (ww2)