Between 1992 and 1998 Snuff Puppets was housed on the third floor directly above the Melbourne Museum of Printing at the old Bradmill Cotton Mills building on Moreland St in Footscray. Museum proprietor Michael Isaacson was keen to share his resources and gave Snuff Puppets carte blanche to use his Museum. Nearly all the promotional posters and materials from this time were printed in limited edition runs at the Museum using scrounged paper, odds and ends of ink, lead type, wooden type, lino cuts and an old press.A4 hand printed linocut on thin cream card in 3 colours; blue black, yellow, red. Depicts a pensive skeleton sitting on a small hill with a lowered flag with the initials SP, partly concealed by a giant yellow worm. The print also features the iconic fish skeleton logo. lino cut prints, skeletons, snuff puppets, puppetry, andy freer, melbourne museum of printing, footscray, michael isaacson

Between 1992 and 1998 Snuff Puppets was housed on the third floor directly above the Melbourne Museum of Printing at the old Bradmill Cotton Mills building on Moreland St in Footscray. Museum proprietor Michael Isaacsen was keen to share his resources and gave Snuff Puppets carte blanche to use his Museum. Nearly all the promotional posters and materials from this time were printed in limited edition runs at the Museum using scrounged paper, odds and ends of ink, lead type, wooden type, lino cuts and an old press. A4 linocut print in two colours. Black background. Right side of page has a skeleton walking on hill waving his left hand and holding a red flag with letters "SP". The iconic fish skeleton logo in top right corner. art, flag, print, snuff puppets, lino cut, puppetry, andy freer, melbourne museum of printing, puppets, footscray, theatre, performing arts, promotional book, skeleton

Index, bibliography, ill, maps, p.335.non-fictionn 1900, Germany was one of modernity's great success stories: The most progressive and dynamic nation in Europe, it was the only country whose rapid economic growth and innovation rivaled that of the United States. Its political culture was far less authoritarian than Russia's and less anti-Semitic than France's. Representative institutions thrived, and competing political parties and elections were a central part of life. How, then, could it be that in little more than a generation this stable modern country would fall into the hands of Adolf Hitler and the violent, racist, extremist political movement he led, a movement that would lead Germany and then all of Europe into utter moral, physical, and cultural ruin?" "There is no story in twentieth-century history more important to understand, and Richard Evans has written the definitive account for our time. A masterful synthesis of a vast body of scholarly work integrated with important new research and interpretations, Evans's history restores drama and contingency to the rise to power of Hitler and the Nazis, even as he shows how ready Germany was by the early 1930s for such a takeover to occur. Its citizens were angry and embittered by military defeat and economic ruin, and its young democracy undermined by a civil service, an army, and a law enforcement system deeply alienated from the new order. The electorate was beset by growing extremism and panic about communism; and the small but successful Jewish community was subject to wide-spread suspicion and resentment. In the end, though nothing about what happened was preordained, Germany proved to be fertile ground for Nazism's ideology of hatred.germany - politics and government 1933-1939, germany - nazi party

Joseph Bell - documentation on life of 'The Late Joseph Bell' - part of page from 'Bendigo and Vicinity (Watson and Bell - Garden Gully line of reef, Bendigo). Bad copy - right-hand column incomplete, no page number)Bendigo and Vicinityperson, individual, joseph bell, garden gully reef. mr watson, white hills, huntly lead claim, niagara mine, annabel mine, crushing plant "ajax"

In 1940 doctors started experimenting with curare for use with electric shock therapy. Electric shock therapy regularly caused broken bones, including vertebrae, and all sorts of dislocations. The intensity of convulsions was high and couldn’t be controlled. During the 19th Century curare was unsuccessfully used to treat rabies, tetanus and epilepsy. By 1935, Harold King had isolated tubocurarine, curare’s active ingredient. In 1942, Harold Griffith successfully used standardised curare (Intocostrin) with cyclopropane. Within five years synthesised muscle relaxants were available. Intocostrin, combined with an anaesthetic agent, was a break-through for this treatment.Solid wooden box with three separate sections inside box. First section contains electrical lead for attaching unit to mains power. Second section contains ECT unit and controls. Third sections contains electrical lead ending in plugs for holding in hands. Sections cannot be separated out, they form one unit.Etched on to the face of the internal unit: PROPERTY OF / THE ROYAL WOMEN'S HOSPITAL Label tape affixed to top of the lid: E.C.T. UNIT OP. THEATRES R.W.H.anaesthesia, muscle relaxants, electroconvulsive shock therapy, women

Pencils handed in from 3 business houses who had them endorsed with their name, type of business and phone number for advertising purposes - garage, pharmacy and draper.6 black lead pencils with rubber on end, with business house names on. Used as give away for advertising. Some unused. 3 as new unsharpened, 1 sharpened slightly used; 1 with rubber end used; 1 with rubber unsharpened.With compliments of: Vic and Nita Gross Men's and Boys Wear Tatura 241581; Ladeyres Pharmacy Tatura; Wilson's (Tatura) Garage Tatura Phone 31.vic and nita gross, ladeyres pharmacy, wilson's garage, advertising pencils

Booklet of buff coloured card cover and 18 pages, small black lead pencil with metal housing, attached to booklet by red string. The booklet is the official programme of the Metroplitan High Schools' Sports Assoc. It was held at the Williamstown Cricket Ground, Wed. Oct. 15, 1919.On the front cover: Mr Brett. See PDF above for complete booklet. Note the hand written list of names inside the back cover.williamstown high school, 1919, sports events, programme, metropolitan high schools' sports association, mr brett

1. The moral lexicon of the Warlpiri people of central Australia LR Hiatt This paper discusses words that match ?Good? and ?Bad?; examples of ?Good? and ?Bad? behaviour; morality and law; and egalitarianism and dominance. It also presents a comparison with Gidjingarli (Burarra). 2. Mobs and bosses: Structures of Aboriginal sociality Patrick Mullins (Mount Druitt, NSW) A commonality of Aboriginal social organisation exists across the continent in communities as different as those from the Western Desert across to Cape York, from the towns of New South Wales and Western Australia to cities like Adelaide. This is found in the colloquial expressions ?mob? and ?boss?, which are used in widely differing contexts. Mobbing is the activity where relatedness, in the sense of social alliances, is established and affirmed by virtue of a common affiliation with place, common experience and common descent, as well as by the exchange of cash and commodities. Bossing is the activity of commanding respect by virtue of one?s capacity to bestow items of value such as ritual knowledge, nurturance, care, cash and commodities. Mobbing and bossing are best understood as structures in Giddens? sense of sets of rules and resources involved in the production of social systems, in this case social alliances. Mobbing and bossing imply a concept of a person as a being in a relationship. Attention needs to be given to the way these structures interact with institutions in the wider Australian society. 3. Recognising victims without blaming them: A moral contest? About Peter Sutton?s ?The Politics of Suffering: Indigenous Policy in Australia since the 1970s? and Gillian Cowlishaw?s replies Ma�a Ponsonnet (Universit� Paris- 8-Saint-Denis) Peter Sutton?s texts on Aboriginal violence, health and their politicisation are replied to using his methodology, and acknowledging his convincing points. Sutton rightly denounces a lack of lucidity and scientific objectivity in anthropological debates. These inadequacies impede identification of what Aboriginal groups can do to improve their situations for fear that this identification would lead to blame the victims. At the other end of the ethical spectrum, those who advocate a broader use of what I will call a ?resistance interpretation? of violence fail to recognise victims as such, on the implicit grounds that seeing victims as victims would deprive them of any agency, on the one hand, and entail blame, on the other hand. I aim to define a middle road between those views: the idea that victims should be acknowledged as such without being denied their agency and without being blamed for their own condition. This middle road allows identification of the colonisers? responsibilities in the contemporary situation of Indigenous communities in Australia, and to determine who can do what. Secondly, I show that Sutton?s texts convey, through subtle but recurrent remarks, an ideology of blame rather than a mere will to identify practical solutions. As a consequence, some of his proposals do not stand on a solid and objective causal analysis. 4. 'You would have loved her for her lore?: The letters of Daisy Bates Bob Reece (Murdoch University) Daisy Bates was once an iconic figure in Australia but her popular and academic reputation became tarnished by her retrograde views. Her credibility was also put in doubt through the exposure of her fictionalised Irish background. In more recent times, however, her ethnographic data on the Aborigines of Western Australia has been an invaluable source for Native Title claims, while her views on Aboriginal extinction, cannibalism and ?castes? are being seen as typical of her time. This article briefly reviews what has been the orthodox academic opinion of her scientific achievement before summarising what is reliably known of her early history and indicating what kind of person is revealed in the 3000 or more letters that she left behind. 5. What potential might Narrative Therapy have to assist Indigenous Australians reduce substance misuse? Violet Bacon (Curtin University of Technology) Substance misuse is associated with adverse consequences for many Australians including Aboriginal and Torres Strait Islander peoples. Extensive research has been conducted into various intervention, treatment and prevention programs to ascertain their potential in reducing substance misuse within Aboriginal and non-Aboriginal communities. I explore the potential of Narrative Therapy as a counselling intervention for assisting Indigenous Australians reduce the harm associated with substance misuse. 6. Bone points from the Adelaide River, Northern Territory Sally Brockwell (University of Canberra) and Kim Akerman (Moonah) Large earth mounds located next to the vast floodplains of the lower Adelaide River, one of the major tropical rivers draining the flat coastal plains of northern Australia, contain cultural material, including bone points. The floodplains of the north underwent dynamic environmental change from extensive mangrove swamps in the mid-Holocene, through a transition phase of variable estuarine and freshwater mosaic environments, to the freshwater environment that exists today. This geomorphological framework provides a background for the interpretation of the archaeology, which spans some 4000 years. 7. A different look: Comparative rock-art recording from the Torres Strait using computer enhancement techniques Liam M Brady (Monash University) In 1888 and 1898, Cambridge University?s Alfred C Haddon made the first recording of rock-art from the Torres Strait islands using photography and sketches. Systematic recording of these same paintings and sites was carried out from 2000 to 2004 by archaeologists and Indigenous Torres Strait Islander and Aboriginal communities as part of community-based rock-art recording projects. Computer enhancement techniques were used to identify differences between both sets of recordings, to reveal design elements that Haddon missed in his recordings, and to recover images recorded by Haddon that are today no longer visible to the naked eye. Using this data, preliminary observations into the antiquity of Torres Strait rock-art are noted along with recommendations for future Torres Strait region rock-art research and baseline monitoring projects. 8. Sources of bias in the Murray Black Collection: Implications for palaeopathological analysis Sarah Robertson (National Museum of Australia) The Murray Black collection of Aboriginal skeletal remains has been a mainstay of bio-anthropological research in Australia, but relatively little thought has been given to how and why this collection may differ from archaeologically obtained collections. The context in which remains were located and recovered has created bias within the sample, which was further skewed within the component of the collection sent to the Australian Institute of Anatomy, resulting in limitations for the research potential of the collection. This does not render all research on the collection unviable, but it demonstrates the importance of understanding the context of a skeletal collection when assessing its suitability for addressing specific research questions.maps, b&w photographs, colour photographs, illustrations, graphs, chartswarlpiri, sociology, daisy bates, substance abuse, narrative therapy, rock art, technology and art, murray black collection, pleistocene sites, watarrka plateau

Keith Boyd - Head teacher April 1950 to December 1955B/W Portrait of a male standing, with hands folded behind his back. Trees in backgrounddeep lead school, education

This Journal written by Georgina Mc Crae Melbourne 1841 - 1865. The Painting on the cover is a self Portrait. A very Interesting account of Victoria's early History.A white coverd paperback - Top in white print in black background Imprint Classics. Georgina's Journal in Pink Print. In Central cover In an oval inset a Colored Portrait of Georgina Mc Crae. Below Portrait Melbourne 1841 - 1865. Edited By Hugh Mc Crae.Inscription on Fly Leaf: Hand written. To The Stawell Historical Society - To Honor the memory of John McClure. REfer Pages 87 - 154. 178. 192. 198.234. Note John Mc Clure is Intered Deep Lead Cemetery 1859.stawell education

History Of Deep Lead School701: Black Card with Blue Binding tape on spine. Faded Silver writing. hand written 701-1 Purple Card Cover with Blue binding tape on spine. Black writing. Hand WriitenDeep Lead School No 721 Underlined Vol.1. Deep Lead School No 721. Vol 2stawell education

With more and more woolsheds being connected to power lines, the need for electric shearing gear markedly increased from the 1960s onwards. The greater economy made electric gear an attractive proposition to many graziers. Requiring only an electric shearing motor, for small and medium scale operations, electric shearing motors were a more economical way of shearing a wool clip. The other option for graziers was Overhead shearing gear, which also required an Engine to provide shared power to a row of shearing stations. Still working, this Sunbeam Electric Shearing Motor – Heavy Duty Model, features a slow speed motor totally enclosed for protection against dust and insects. The full bearing down tube is easily removed and stored to be out of the way when not in use (not pictured). Providing 0.5 hp, which is twice the power ever needed for shearing sheep, this buffer allows for fluctuations in voltages that can occur in rural districts. Inventor Frederick Wolseley made the world's first commercially successful power-shearing system in Australia in 1888. US company Cooper, which had been founded in 1843 as a maker of sheep dip, began selling Wolseley equipment in the USA in 1895. The Chicago Flexible Shaft Company successfully entered the power-shearing market a few years later and entered into a joint venture with Cooper. It set up a branch in Sydney and sold shearing sets, and engines to power them, into the Australian market. In 1921 the US parent company, realising it needed to make products whose sales were not as seasonal as those of shearing equipment, made its first household appliances and branded them Sunbeam. In 1933, changes in exchange rates and taxes led the company to manufacture engines and shearing equipment in Australia via subsidiary Cooper Engineering, which changed its name to Sunbeam in 1946. Although most Australians know of this company as a major manufacturer of household appliances, its rural division flourished and retained the Sunbeam name for shearing equipment even after it was taken over by New Zealand company Tru-Test in 2001. This 0.5 horsepower vertical brushed motor air-cooled engine was designed to drive a single shearing plant. From the central cylinder which features a yellow “Sunbeam” sticker, a grey 240v power lead can be found on the left-hand side. A blue capacitor is located next to this power lead. Below, two legs extend and meet to form a foot which is fastened to a wall. On the right-hand side of the engine, a specification plate is located on the central cylinder. A yellow directional arrow sticker is located on the rotating section of the engine below the specification plate (location for photography, this section is designed to rotate and hence this sticker is not fixed in this location). At the rear of the cylinder, a plastic cap with small air cut outs protects the air-cooled engine from contaminants. At the front of the engine, the location for securing the bearing down tube is located. On the right-hand side of the lock for the bearing down tube is the handle, to which a string is often attached for switching the motor on and off by a shearer bent at the waist (not pictured). Sticker. Gold writing. Front of shearing motor “Sunbeam” Plate. Inscribed. Side of shearing motor. “Sunbeam / SHEARING MOTOR / MADE IN AUSTRALIA / 0.5 H.P. / 220/240 V / 1 PHASE A.C. / 4.0 AMPS / 50 C/S. / CONT. RTG. / 1425 R.P.M. / CLASS A INSUL / NO. J244560 / TYPE: NSB5C2/49." sheep sheering, shearing equipment, sunbeam, electric shearing motor

Reportedly these earrings were made from gold found on the Eureka Lead. They were made by a Ballarat jeweller.Photograph of earrings made from gold nuggets, hand made by Ballarat gold fields jeweller the earrrings comprise grapevines and grapes with handmade posts to go through ears.none.gold, earrings, jewellery, goldfields, eureka, jeweller, ballarat

Kor-I-Nor Gold Mining Co was registered on 28 July 1856.The framed hand coloured lithograph shows the exterior of the Kor-I-Nor Gold Mining Co Registered, Golden Point Lead, Ballarat, and a lost of shareholders. sebastopol, herman deutsch, kor-i-nor gold mining co, golden point lead

Black and White photograph contained with Reg. Item 1902 - Photo Album from Keith Kings to Les Denmead 1970. Photograph of SEC Bendigo tram 17 on the depot lead, Easter Monday (?) April 1949. Keith Kings No. C(a)(1) Scanning: i - image file, p - presentation file, b - back of photograph.Stamp in top left hand corner and handwritten number with "K.S. Kings No. C(a)(1) Copyright reserved". In blue ink "Bendigo / No.17 / Open bench car / Depot / 4/49".trams, tramways, bendigo, open bench tramcars, depot, tram 17

Set of 8 black and white photographs of the SEC Ballarat track welding truck, Reg. No. 119 341. Truck is a British Bedford truck, model WHG, built by GMH Melbourne between 1932 and 1934. Has a fabric roof, chassis fitted with a tray top body, side tool box, metal frame and covered with canvas, fitted out with a motor generator set, welding equipment and oxy acetylene bottles. Also fitted with a spot light - 'Auto Reel Lite". - See Related Items sheet on truck notes provided by Kevin Oates, MFESB workshops, 4/2001. (Scan of this sheet of the Kodak folder added 15-8-2017 - see pdf file.) 1705.1 - side on view of truck with covers down, except for opening at back. Photographed in Wendouree Parade with two different boat sheds in the background. 1705.2 - view with drivers side cover opened, showing equipment arrangement. 1705.3 - close up view of motor generator set and controls and one of the oxy acetylene bottles. 1705.4 - view showing equipment laid out on the roadway, welding cover, seat, grinder, cables, shovels, welding mask etc. 1705.5 - close up view of motor generator control panel and associated cables. 1705.6 - view of side of truck showing all equipment. 1705.7 - vertical format photo from rear of truck showing equipment laid out and wandering lead connected to the overhead. Also shows high voltage wires on a power pole fitted with a bracket arm. 1705.8 - view of truck from the front, with SEC symbol on side, with a covers closed. Thought to be photographed at loop in Wendouree Parade on the View Point line, near Mill St. Prints when donated to the BTM were contained within a red and yellow "Kodak" folder. Folder stored with catalogue worksheet. On rear of folder in ink is number "53569" and stamped on the front is number "984" and written in front top left hand cover, "8 prints" and in top right hand corner word "Sarah". See Notes provided by Kevin Oates of the MFESB (Metro Fire Brigade Melbourne) Thornbury workshops on the truck, manufacture and engine. A survey of Wendouree Parade on 22/4/2001 did not show the boat sheds or power lines featured in the photographed. Thought to be in vicinity of Power station because of the high voltage lines on the power poles.Stamped on rear in black ink, "984" on photos 1705.3 to 1705.8.trams, tramways, welding truck, trackwork, secv, wendouree parade

Has a strong association with tram crews and the rosters crew workings, possibly D.J. Everett. Prepared by crews from sheets to enable them to know what service times to run, meal times, details of crew changes etc, based on their allocated shift or run from the roster.Thirty eight (38) page red metal spiral binding, notebook with card board covers. Each sheet faint ruled, both sides. Front cover had a drawing of a Scots lassie with a Scots terrier on a lead and a drawing of a street scene in the background with the words "Scotland" in script. Rear cover has a drawing of a castle on it. Each sheet, most left hand side only has the hand written details of each SEC Ballarat run - giving sign on times, notes, timetables, which run taken or taken by, meal times, notes with regard to special instructions, finish times and total hours worked. Image 1 shows covers and image 2, one of the sheets with the runs printed on both side of the page. On a scrap of paper, written on the back of a Ballarat Summary timesheet for a Thursday in 1968 is the run details for 22 run. Has been folded into 4. See also Reg item 4073 for a later book and 6876 for a typed versionOn rear cover - phone numbers for M. Morris, Tierney, Tram depot and tram office.trams, tramways, ballarat, rosters, employees, shifts, timetables

Yields information about the type and presentation of books or information folders that were sent to the Electric Supply Company of Victoria about tramway products available on the market and the company the produced them.Folder with 24 pages of advertising pamphlets bound into it with two metal clip binders advertising products available from the Railway Track-Work Company and titled ""Railway Track Equipment - Track Grinding Machines, Welding and Bonding Machines - Bonds, Welding Steel, Grinding Wheels and Blocks". Has brochures or pamphlets for: . The Universal Rotary Track Grinder . Reciprocating Track Grinder . The Atlas Rail Grinder . The Ajax Electric Arc welders .Vertical Rail Lifter . The Jackson Electric Tie Tamper. Generally the lead page of each pamphlet has been imaged. Provides a description of each item, along with method of operation and parts listing generally. The folder has on a number of pages and the back cover, a sticker from Frank R. Perrot (Now Perrot and Adams Ltd), Machinery Merchant of 394 Kent St Sydney. Railway Track-work Company , Clementine, Thompson and Mercer Sts, Philadelphia, Pennsylvania USA. For a full scan of the document see the hi res file.Numerous: Front cover sticky label "1620" in top left hand corner, "Mr Pringle" on front cover and stamp with words "Ballarat Tramway Preservation Society Catalogue No. 10" in ink on front cover. Inside front cover has a pencil note, behind the crease in the bottom right hand corner. On the first pamphlet "Ballarat Tramway Preservation Society Catalogue No. 10" in ink on top right hand corner. On parts page for the Reciprocating Track Grinder has the "Perrot and Adam Ltd" company stamp.trams, tramways, trackwork, equipment, rails

Colour printed postcard of five Birney trams lined up in Tramways Ave, lead by No. 11. Postcard has title "Bendigo Vic" in the bottom right hand corner. Other trams in sequence are 15, 30, 302 (ex 29) and 28. Produced by Color Offset Marketing Pty Ltd, has placed for Stamp and Address box. Photo by Earl Ewers Dec. 1986.Has label on front left hand bottom of card with "1" inked on it.trams, tramways, bendigo, birney

Colour printed postcard of five Birney trams north bound in Pall Mall, lead by No. 11. Postcard has title "Bendigo Vic" in the bottom left hand corner. Other trams in sequence are 15, 30, 302 (ex 29) and 28. Produced by Color Offset Marketing Pty Ltd, has placed for Stamp and Address box. Photo by Earl Ewers Dec. 1986.Has "47" in a circle in the top left hand corner and a "William F Scott" label in the bottom left hand corner.trams, tramways, bendigo, birney, pall mall, tram 19

.1 - Book - 8 pages + grey covers, side stapled, issued by the Australian Standards Association, "Electrical Voltages and electrical frequencies for new installations ", C1 (a&b) - 1926, December 1926. .2 - Book - 36 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Overhead Line wire material for telegraph and telephone purposes", C3-11-1925, November 1925. .3 - Book - 20 pages + brown covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Telephone cable, paper insulated lead covered", C12 - 1928, January 1928. .4 - Book - 24 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Marking for Switchboard bus-bars and connections" C13 - 1925, December 1925 - with a pasted green label noting that the "tentative standard is now endorsed as Australian Standard without amendment" - dated Oct. 1930. .5 - Book - 32 pages + grey covers, side stapled, issued by the Australian Standards Association, Tentative Australian Standard "Dimensions and Resistances of Bare Annealed Copper Wire for Electrical Machinery and Apparatus", C 18-1926, October 1926. .6 - Book - 12 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard "Slate Slabs for Electrical Purposes", C19 - 1926, July 1926. .7 - Book - 16 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Moulded Flat Top Insulation Bushes" C20-1926, October 1926. .8 - Book - 16 pages + brown covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Australian Standard "Insulation dimensions and resistance of enamelled plain copper wire for instruments and apparatus" C21-1928, January 1928. .9 Book - 20 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Watertight Glands for electric cables" C22-1926, September 1926. .10 - Book - 20 pages + grey covers, side stapled, issued by the Australian Commonwealth Engineering Standards Association, Tentative Australian Standard - "Air-break knife switches and laminated brush switches for voltages not exceeding 660Volts" - C23 - 1926, August 1926" On top right hand corner has the date stamp of the "The Electric Supply Co. of Victoria Ltd Ballarat" trams, tramways, power station, standards, materials, electrical systems