Metal sign (one of two- the other is missing) that previously hung on one side of the main entrance door at Dalgety Wool Store on Gheringhap St (now Deakin University waterfront campus). Sign was polished daily by Percy Johnson, a janitor at the building in the 1960's. Donor worked at the building as a clerk between 1958 - 1982. Sign was found by a metal collector by the side of the road c.2018. Metal sign with pressed text. Possibly brass. May have originally been gold colour but now a dull brown. Text is cracked and shows losses in some places. Four screw holes, one at each corner.AGENT FOR DALGETY AND COMPANY LIMITED (INCORPORATED IN ENGLAND) WOOLBROKERS

Used to cancel or punch paper tickets when purchased. Placed lear shaped hole in the ticket. Based on the stamped number, used from South Melbourne Depot. This type of punch was phased out by the 1990s when conductors were removed from trams.Demonstrates an item used by the MMTB to cancel tickets. Would have been issued to a conductor at South Melbourne Depot.Brass cast, machined, ticket punch, spring loaded, consists of two main parts with a pin & spring from coiled wire and fitted with formed wire retaining hole fitted to one of the arms. Item stamped "A259"stamped "A259" on one armtramways, ticket punch, tickets, fares, conductors, south melbourne depot

Timetable board, giving first and last trams to City for weekdays, Sat. and Sun. With mounting holes, lettered on one side only. Reverse side painted black. Located at Depot or Haddon St. loop. On lower half, writing of times apparent. See SECV TimetablesDemonstrates a SECV timetable signs that were located at various points on the tram system,Sheet metal sign, black background, white letters, painted.transport equipment, timetable boards, secv street furniture

This was retrieved in 1982 by Geoff Stevenson. It was a part of the original jetty at Tabbara on the Brodribb River used by Samuel Richardson who established his mill in .1882. The first saw mill plant at Orbost was set up early in 1876, There was a constant demand for timber to supply the growing townships of Orbost , Marlo and surrounds. It was at this mill that the original paddle steamer Curlip was built. More information in "Curlip" by May Leatch.The Richardson family was one of the very early settler families to establish themselves in the Orbost district. Before the Richardson's mill was established, settlers in the Snowy region either rough cut their own timber or had to bring it in from mills some distance away.A portion of a post from the old Tabbara jetty on the Brodribb River - Samuel Richardson's mill . There is still some original preserving tar on it. It has two holes, one with a bolt attached. It is possibly made from mahogany cut on the site.richardson-samuel tabbara-jetty brodribb-river

Bone plastic conical shaped salt shaker with one hole in the top and a screw-in base7350-66-028-3979 E.F.M. 79salt shaker

Identification disc of Paul Konig KreigsmarineOval metal identification disc. 2 holes at top of oval and one hole at bottomPaul Konig N3943/40Tuniforms, merchant, marine, paul konig, identification discs

Leather belt worn by soldiers either around waist or diagonally across body to carry ammunition pouchesManufactured and sold by Holden and FrostTan leather strap with holes midway and each end . One brass buckle midwayHOLDEN AND FROST 1916military, belt

The boards each have instructions adhered to each side, printed in four languages (English, French, Dutch and German). At the beginning of a shore-to-ship rescue the instructions are sent to the distressed vessel after the first rocket line was received by them. The stranded people on the vessel follow the instructions to assist the life saving rescue crew in saving their lives. Saving lives in Warrnambool – The coastline of South West Victoria is the site of over 600 shipwrecks and many lost lives; even in Warrnambool’s Lady Bay there were around 16 known shipwrecks between 1850 and 1905, with eight lives lost. Victoria’s Government responded to the need for lifesaving equipment and, in 1858, the provision of rocket and mortar apparatus was approved for the lifeboat stations. In 1859 the first Government-built lifeboat arrived at Warrnambool Harbour and a shed was soon built for it on the Tramway Jetty, followed by a rocket house in 1864 to safely store the rocket rescue equipment. In 1878 the buildings were moved to the Breakwater (constructed from 1874-1890), and in 1910 the new Lifeboat Warrnambool arrived with its ‘self-righting’ design. For almost a hundred years the lifesaving and rescue crews, mostly local volunteers, trained regularly to rehearse and maintain their rescue skills. They were summoned when needed by alarms, gunshots, ringing bells and foghorns. In July 1873 a brass bell was erected at Flagstaff Hill specifically to call the rescue crew upon news of a shipwreck. Some crew members became local heroes but all served an important role. Rocket apparatus was used as recently as the 1950s. Rocket Rescue Method - Rocket rescue became the preferred lifesaving method of the rescue crews, being much safer that using a lifeboat in rough seas and poor conditions. The Government of Victoria adopted lifesaving methods based on Her Majesty’s Coast Guard in Great Britain. It authorised the first line-throwing rescue system in 1858. Captain Manby’s mortar powered a projectile connected to rope, invented in 1808. The equipment was updated to John Dennett’s 8-foot shaft and rocket method that had a longer range of about 250 yards. From the 1860s the breeches buoy and traveller block rocket rescue apparatus was in use. It was suspended on a hawser line and manually pulled to and from the distressed vessel carrying passengers and items. In the early 1870s Colonel Boxer’s rocket rescue method became the standard in Victoria. His two-stage rockets, charged by a gunpowder composition, could fire the line up to 500-600 yards, although 1000 yards range was possible. Boxer’s rocket carried the light line, which was faked, or coiled, in a particular way between pegs in a faking box to prevent twists and tangles when fired. The angle of firing the rocket to the vessel in distress was measured by a quadrant-type instrument on the side of the rocket machine. Decades later, in 1920, Schermuly invented the line-throwing pistol that used a small cartridge to fire the rocket. . The British Board of Trade regularly published instructions for both the beach rescue crew and ship’s crew. It involved setting up the rocket launcher on shore at a particular angle, determined by the Head of the crew and measured by the quadrant, inserting a rocket that had a light-weight line threaded through its shaft, and then firing it across the stranded vessel, the line issuing freely from the faking board. A continuous whip line was then sent out to the ship’s crew, who hauled it in then followed the instructions – in four languages - on the attached tally board. The survivors would haul on the line to bring out the heavier, continuous whip line with a tail block connected to it. They then secured the block to the mast or other strong part the ship. The rescue crew on shore then hauled out a stronger hawser line, which the survivors fixed above the whip’s tail block. The hawser was then tightened by the crew pulling on it, or by using the hooked block on the shore end of the whip and attaching it to a sand anchor. The breeches buoy was attached to the traveller block on the hawser, and the shore crew then used the whip line to haul the breeches buoy to and from the vessel, rescuing the stranded crew one at a time. The rescue crew wore scarlet, numbered armbands and worked on a numerical rotation system, swapping members out to rest themThis pair of tally board is significant for its connection with local history, maritime history and marine technology. Lifesaving has been an important part of the services performed from Warrnambool's very early days, supported by State and Local Government, and based on the methods and experience of Great Britain. Hundreds of shipwrecks along the coast are evidence of the rough weather and rugged coastline. Ordinary citizens, the Harbour employees, and the volunteer boat and rescue crew, saved lives in adverse circumstances. Some were recognised as heroes, others went unrecognised. In Lady Bay, Warrnambool, there were around 16 known shipwrecks between 1850 and 1905. Many lives were saved but tragically, eight lives were lost.Tally boards, two, rectangular wooden boards, both with a hole drilled into one short end. Instructions are glued onto the boards. They were printed in light letters onto dark canvas in four languages (English, French, Dutch and German). Text (English) "MAKE THIS HAWSER FAST ABOUT 2 FEET ABOVE THE TAIL BLOCK. CAST OFF WHIP FROM HAWSER. SEE ALL CLEAR AND THAT THE ROPE IN THE BLOCK RUNS FREE, AND SHOW SIGNAL TO THE SHORE."flagstaff hill maritime museum and village, flagstaff hill, maritime museum, maritime village, warrnambool, great ocean road, lady bay, warrnambool harbour, port of warrnambool, tramway jetty, breakwater, shipwreck, life-saving, lifesaving, rescue crew, rescue, rocket rescue, rocket crew, lifeboat men, beach rescue, line rescue, rescue equipment, rocket firing equipment, rocket rescue equipment, maritime accidents, shipwreck victim, rocket equipment, marine technology, rescue boat, lifeboat, volunteer lifesavers, volunteer crew, life saving rescue crew, lifesaving rescue crew, rocket apparatus, rocket rescue method, shore to ship, rocket apparatus rescue, stranded vessel, line throwing mortar, mortar, rocket rescue apparatus, line thrower, line throwing, lifeboat warrnambool, beach apparatus, rocket machine, rocket head, rocket launcher, rocket line, beach rescue set, rocket set, tally board, rescue instructions

Prepared to advise pedestrians and motorists of tramway track work being undertaken in Ballarat.Demonstrates the methods the SEC used to advise of track works.Metal sign, steel, yellow background with black letters stating "Caution Tram Track Under Repair". Has four holes top and one centrally along the bottom edge. Shows on the rear that a stand was once fixed to the rear of the sign.tramways, secv, ballarat, signs, track work

Used by the MMTB to indicate to conductors and inspectors, the tramcar number. Placed on the driver's bulkhead, facing into the tram with one at either end of the tram. The tram was built by Holden's Bodyworks in Adelaide, entered service in April 1926 and was disposed of in Oct. 1967.Demonstrates the method of advising crews the tramcar number internally.Set of 2 signs - galvanised rectangular sheet steel - provided with four screw holes, one in each corner painted with the numerals 3, 3, and 0. Both have small pins - one on the lower edge and one on the right side.signs, trams, tramcars, tram 330, w2 class

Timetable board giving first and last trams, weekdays, Sat and Sun. To 'City' with mounting holes, lettered on one side only, reverse side painted black, located at Gardens Loop, via Sturt St. sign. Some over painting on sign of former service times. See SECV Timetables. Demonstrates a SECV timetable signs that were located at various points on the tram system,Sheet metal sign, black background, white letters, painted.ballarat trams, timetable boards, secv street furniture

A.C. Voltmeter, 150-600 volts non liner, semicircular scale ventilation holes. One termnal post on each side panel. Maker's name plate on top face below scale windo. Adjacent: spring-loaded contact button. Model 155. Serial Number 42339scientific instrument, ballarat school of mines, weston electrical instrument co

These old spools or bobbins were used in textile mills and on looms in factories. The wooden one is a piece of the Industrial Revolution. Two vintage or antique wooden and thick cardboard industrial large sewing spools. The wooden one is an example from the Industrial Revolution. It has a round wooden top and base, with metal bands around both ends. There are two holes in one end at the side of the bigger hole in the middle which the spool would be attached to a machine. It has thick twisted discoloured cream string like thread wound around it. The cardboard wide open ended spool is smaller with thick cream coloured silk thread wound onto it.They were probably used in mills or factories.cotton reels, thread holders, threads

This example of a sailing ship’s ‘dead-eye’ is from the wreck of the LOCH ARD, which sank near Port Campbell in 1878. The vessel was an iron hulled clipper ship constructed for the Loch Line in 1873. It was part of a fleet of similar merchant ships owned by that company, which specialised in bringing passengers and goods from London via the Great Circle route to Melbourne, and returning to Britain via Cape Horn with the colony’s wool clip. Deadeyes were a common feature of sailing ship technology in the nineteenth century. They were a simple, cheap, and hard-wearing device that, in conjunction with another deadeye, provided an effective means of levering, or tightening, attached ropes and stays. Lower deadeyes were fixed to the sides of the ship by an encircling metal collar (inset in a flattish groove chiselled around the outer circumference of the disc), which was bolted to iron bars attached to the hull (called chain-plates). Upper deadeyes were looped by a strong hemp or wire rope (inset in a rounded groove carved around the outer circumference of the disc), which was joined to the bottom ends of the rigging which reached up to secure the masts into position (called shrouds or stays). Connecting a Lower deadeye to its corresponding Upper deadeye was a rope (called a lanyard) which looped up and down through the three “eyes” of each disc, to form a pulley system. The hitching of the two deadeyes with a looped lanyard provided the means of tightening, or loosening, the tension on the mast rigging ― essentially by pulling against the chain-plates bolted to the outside of the hull. It was a procedure that could be performed by sailors at sea and in emergencies. For example, after a gale the stays may have stretched and the masts worked loose, requiring retightening. Or, in the extreme circumstance of shipwreck, the lanyards might need to be released on the weather side, so that the masts fall away from the stricken vessel. The shipwreck of the LOCH ARD is of State significance. Victorian Heritage Register S417.A well-preserved ship’s deadeye with wire loop rope still attached. The original tar coating for water-proofing still remains, colouring the entire artefact black. It is wrapped in hessian cloth and hemp cord and is currently in storage under secure and stable conditions. This deadeye was recovered from the wreck of the LOCH ARD. The artefact is a typical deadeye, comprising a thick round wooden disc, pierced by 3 similarly sized and shaped holes from one flat side through to the other, in a triangle formation. The survival of the wire cable loop-rope suggests it was an Upper Deadeye, connected to the shrouds (mast rigging). Previous number PWO 2388.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, deadeye, loch ard, rigging

Leaf from a photo album containing 2 black and white photographs pasted onto sheet of brown/grey cardboard with two punch holes at one end. Photos taken early 1920's? Photo 1 - "Kalgoorlie Western Australia" in pencil on top of photo, and "Hannan Street" on bottom. Photo shows a tram traveling along Hannan Street with buildings on either side of photograph. Has poles down the centre of the street to support the bracket arms for the tramway and other power lines. Tram has "Nestles Milk" advertisement on dash panel. Photo 2 - "Breakneck Gorge Hepburn" in pencil at base of photograph.trams, tramways, hepburn springs, kalgoorlie, hannan st

The Hotel Warrnambool, the second in Warrnambool to have that name, was built on the site of the old Hotel Mansions (Ozone Coffee Palace / Ozone Hotel) which was destroyed by fire in 1929. The Hotel Warrnambool was opened in 1931 using the licence transferred from the Hotel Mansions. It has played a major role in the social and economic life of the city since this time.This luggage label from the Hotel Warrnambool is of some historical significance as the hotel is a prominent one in Warrnambool today built on the site of the Hotel Mansions regarded as the finest building ever to be erected in Warrnambool. Buff coloured rectangular label with maroon text. Two corners of the card are mitred. The label features a open ended wreath with the letters WH entwined in its centre. There are three punched holes , one with a reinforce sticker. Two pieces of adhesive tape are attached on the top and the bottom. HOTEL WARRNAMBOOL WARRNAMBOOL( In smaller font). Mr. ..... 1960 (in pencil) hotel warrnambool, ozone coffee palace, ozone hotel, warrnambool

Part of Honybun collectionSample of W W I camoflague fabricSample of doped canvas fabric from W W I German aircraft. Rectangular shape of Fabric in green, purple and yellow with hole for tag in one cornermilitary history, army, air force

Ophthalmoscopy, also called funduscopy, is a test that allows a health professional to see inside the fundus of the eye and other structures using an ophthalmoscope (or funduscope). It is done as part of an eye examination and may be done as part of a routine physical examination. It is crucial in determining the health of the retina, optic disc, and vitreous humor. The pupil is a hole through which the eye's interior can be viewed. For better viewing, the pupil can be opened wider (dilated; mydriasis) before ophthalmoscopy using medicated eye drops (dilated fundus examination). However, undilated examination is more convenient (albeit not as comprehensive), and is the most common type in primary care. The Photoscope, or Mirror. Many varieties of the photoscope are in use. .... Some prefer a mirror with a small, folding, protecting handle, or two mirrors, so made that one may serve for the handle while the other is in use. These are easily carried in the pocket, ... If the mirror is perforated in the center, the light rays pass freely to the examiner's eye, but the edge of the perforation, unless perfectly blackened and free from chipping, causes very annoying reflections.Round circular black compact hinged - When opened has mirror with hole in it on one side and black lid/cover on the other - Small lip on top cover. ophthalmoscope, fundoscope, eye testing

Used by the Estoppey family, Swiss emigrants, at Briagolong. Three and four-legged milking stools were standard equipment in early dairies, where cows were milked by hand. Similar stools were used in the home for informal seating. Wooden milking stool with a square top of axe-dressed hardwood and four wooden legs that fit through holes in the seat. One leg is made from a branch of a tree.dairying, furniture

Two large pieces of wood with a wide holed metal piece at one end. Large corkscrew metal pipe attached to metal tuning piece which is screwed into the wood.trades, carpentry

Porthole, painted blue, with hinged locking bolts welded to base plate. Base plate has six bolt holes, one till with bolt and nut. Base plate has glass plate as does hinged porthole. Corrosion and paint peeling. Both plates of glass have cracks. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, porthole, ship fitting

Silver-coloured metal bell-shaped pin gauge with holes of various sizes, each one with a different number. Reverse is blank.

The inhaler can be used in hospitals in the labour ward for the patient to absorb trichloroethylene. The inhaler can be mounted on the bracket which can be secured to the leg of a labour bed. The inhaler contains a wick which absorbs trichloroethylene and will function for several hours.This inhaler was used in the Tawonga District Hospital.Wooden box with corners strengthened with steel plate and lid on 2 hinges. Lid has 3 rectangular lengths of wood attached to enhance packing and a yellow piece of paper with red writing stapled on. Box contains 2 metal clamps, a light metal stand/bracket with screw and holder and a hard black plastic mask. In the other side: 2 sheets including Instructions, a small paper bag with spare washers, a light brown extendable hose with metal attachment at one end and a light brown oval rubber bladder with a hole at one end to fit over the hose. Light metal Inhaler - 3 cylinders of different diameters attached to a plate. Red markings / writing and plate incl. serial no. Yellow paper on lid explains "...packing box is supplied free with the Tecota mark 6 Inhaler..." Mask: Cyprene Ltd / Keighley /Made in England Instructions / for the preparation of / Tecota / Mark 6 / Trichloroethylene B.P. / Inhaler Bladder: A Cig Product / 4 litre / Made in England to Inhaler: Cyprane Ltd. / Max Min / Pat No 646680 / Patents Pending / Tecota Mark 6 / Charge with / Trichloroethylene B.P. / Cyprane Ltd. / Serial No. / Keighley / Yorks.medical. hospital. inhaler. trichloroethylene. childbirth.tawonga district hospital

Clothing. Women's cream coloured cotton nightgown with elbow length sleeves. High round neckline with 3 cm broderie lace frill. Bib section below neckline (34 cms X 27 cms) has pattern of vertical lace strips, pin tucks and dark pink and cream ribbon. Front skirt section gathered into bib section. Back skirt pleated at centre back into yoke across shoulders. Long straight sleeves finished at hem with pin tucks and broderie lace edging. "A'' shaped garment widening to hem. Front opening left of centre below neckline (21 cm) fastened with two 1 cm plastic buttons - one button hole and one cotton loop.costume, female, women's cream cotton nightgown.

This set of Victorian era wooden sand pegs was part of the equipment used by the Rocket Rescue Crew when attending a shipwreck. The broad pegs were designed to give a strong grip on soft sand and soil. The pegs could be used with the sand anchor as well as to give a stronger hold on the tripod holding the hawser. The same design is still available today and is used by the Army and by campers. The rocket rescue crews used a sand anchor at a beach rescue site to weigh down the rescue apparatus. The crew would connect the shackle to the other cable on the anchor and to the loose steel cable to form a triangle with the cable lengths. They would then bury the anchor in about a 0.75-meter trench, keeping the free end of the cable above the surface. This end of the cable was then connected to a block that was attached to the heavy hawser line. The block and a crotch pole were used to keep the hawser line high and taught as the survivors were hauled to shore on a line or in a breeches buoy. Saving lives in Warrnambool – The coastline of South West Victoria is the site of over 600 shipwrecks and many lost lives; even in Warrnambool’s Lady Bay there were around 16 known shipwrecks between 1850 and 1905, with eight lives lost. In 1859 the first Government-built lifeboat arrived at Warrnambool Harbour and a shed was soon built to house it. In 1858 the provision of rocket and mortar apparatus was approved for lifeboat stations in Victoria, and in 1864 a rocket house was built to safely store the rocket rescue equipment. In 1878 the buildings were moved to the Breakwater area, and in 1910 the new Lifeboat Warrnambool arrived with its ‘self-righting’ design. For almost a hundred years the lifeboat and rocket crews, mostly local volunteers, trained regularly to maintain their rescue skills. They were summoned when needed by alarms, gunshots, ringing bells and foghorns. Some became local heroes but all served an important role. By the end of the 1950s, the lifeboat and rescue equipment had become obsolete. Rocket Rescue Method - The Government of Victoria adopted lifesaving methods based on Her Majesty’s Coast Guard in Great Britain. It authorised the first line-throwing rescue system in 1858. Captain Manby’s mortar powered a projectile connected to a rope, invented in 1808. The equipment was updated to John Dennett’s 8-foot shaft and rocket method that had a longer range of about 250 yards. From the 1860s the breeches buoy apparatus was in use. The apparatus was suspended on a hawser line and manually pulled to and from the distressed vessel carrying passengers and items. In the early 1870s Colonel Boxer’s rocket rescue method became the standard in Victoria. His two-stage rockets, charged by a gunpowder composition, could fire the line up to 500-600 yards, although 1000 yards range was possible. Boxer’s rocket carried the light line, which was faked, or coiled, in a particular way between pegs in a faking box to prevent twists and tangles when fired. The angle of firing the rocket to the vessel in distress was measured by a quadrant-type instrument on the side of the rocket machine. Decades later, in about 1920, Schermuly invented the line-throwing pistol that used a small cartridge to fire the rocket. The British Board of Trade published instructions for both the beach rescue crew and ship’s crew. It involved setting up the rocket launcher on shore at a particular angle measured by the quadrant, inserting a rocket that had a lightweight line threaded through its shaft, and then firing it across the stranded vessel, the line issuing freely from the faking board. A tally board was then sent out to the ship with instructions in four languages. The ship’s crew would haul on the line to bring out the heavier, continuous whip line, then secure the attached whip block to the mast or other sturdy part of the ship. The rescue crew on shore then hauled out a stronger hawser line, which the ship’s crew fixed above the whip block. The hawser was then tightened using the block on the shore end of the whip. The breeches buoy and endless whip are then attached to the traveller block on the hawser, allowing the shore crew to haul the breeches buoy to and from the vessel, rescuing the stranded crew one at a time. This set of sand pegs would have been used with sand anchor that is part of the rocket rescue equipment . It is significant for its connection with local history, maritime history and marine technology. Lifesaving has been an important part of the services performed from Warrnambool's very early days, supported by State and Local Government, and based on the methods and experience of Great Britain. Hundreds of shipwrecks along the coast are evidence of the rough weather and rugged coastline. Ordinary citizens, the Harbour employees, and the volunteer boat and rescue crew, saved lives in adverse circumstances. Some were recognised as heroes, others went unrecognised. In Lady Bay, Warrnambool, there were around 16 known shipwrecks between 1850 and 1905. Many lives were saved but tragically, eight lives were lost.Peg or spike; set of twelve wooden pegs, painted red. Pages have a long, thick square shank with bevelled side edges, flat top with broad hook on one side of the top and a point at the other end. A small hole goes from one side to the other side near the centre of the shank, on the face without the hook. flagstaff hill maritime museum & village, flagstaff hill, maritime museum, maritime village, warrnambool, great ocean road, shipwreck, life-saving, lifesaving, rescue crew, rescue, rocket rescue, maritime accidents, shipwreck victim, rocket crew, beach rescue, line rescue, rescue equipment, rocket firing equipment, rocket rescue equipment, rocket apparatus, beach apparatus, breeches buoy, rocket house, rocket equipment, rocket launcher, rocket line, marine technology, beach rescue set, traveller, block, running block, pulley, hawser, faked line, lady bay, warrnambool harbour, port of warrnambool, volunteer lifesavers, volunteer crew, breakwater, rocket rescue method, rocket rescue apparatus, shore to ship, rocket apparatus rescue, stranded vessel, whip line, endless whip, harbour board, sand anchor, rocket set, anchor backer, beach anchor, backer, steel cable, wire cable, sand peg, wooden tent peg, army peg, military peg

Demonstrates the method of recording who built the tramcar body.Brass cast Builders' plate with raised letters on both sides - " J.M. JONES' SONS WEST TROY N.Y." Rounded on one corner. Has small lug on both sides on square end - window pull?? On lower edge, has two holes, countersunk on one side, See Tramways of North Sydney. - I. MacCowan 1990In pencil on non countersunk side "TRAM No. 15"tramways, trams, builders' plate, j.m. jones, ballarat??