Showing 123 items
matching launceston tasmania
-
Ballarat Heritage Services
Map, Australian Colonies (States), c1918
Copy of a map from 'A Short History of Australia' by Ernest Scott published in 1918. map, australia, indian ocean, van dieman's land, tasmania, new south wales, sydney, western australia, perth, albany, launceston, hobart, south australia, melbourne, townsville, rockhampton, brisbane, northern territory, queensland -
Flagstaff Hill Maritime Museum and Village
Plaque - Nameplate, ca. 1970s
This nameplate is a reproduction of the Ross & Duncan nameplate and was displayed on the Rowitta vessel activation at Flagstaff Hill. Ross & Duncan of Glasgow manufactured marine engines and boilers from the time it was established in 1860 and growing to employ 450-500 workers by 1911. SS ROWITTA: - The 1909 steam ferry, SS Rowitta, was installed as an exhibit at Flagstaff Hill in 1975 and was enjoyed by many visitors for 40 years. Rowitta was a timber steam ferry built in Hobart in 1909 using planks of Huon and Karri wood. It was a favourite of sightseeing passengers along Tasmania’s Tamar and Derwent rivers for 30 years. Rowitta was also known as Tarkarri and Sorrento and had worked as a coastal trading vessel between Devonport and Melbourne, and Melbourne Queenscliff and Sorrento. In 1974 Rowitta was purchased by Flagstaff Hilt to convert into a representation of the Speculant, a historic and locally significant sailing ship listed on the Victorian Heritage Database. (The Speculant was built in Scotland in 1895 and traded timber between the United Kingdom and Russia. Warrnambool’s P J McGennan & Co. then bought the vessel to trade pine timber from New Zealand to Victorian ports and cargo to Melbourne. It was the largest ship registered with Warrnambool as her home port, playing a key role in the early 1900s in the Port of Warrnambool. In 1911, on her way to Melbourne, it was wrecked near Cape Otway. None of the nine crew lost their lives.) The promised funds for converting Rowitta into the Speculant were no longer available, so it was restored back to its original configuration. The vessel represented the importance of coastal traders to transport, trade and communication in Australia times before rail and motor vehicles. Sadly, in 2015 the time had come to demolish the Rowitta due to her excessive deterioration and the high cost of ongoing repairs. The vessel had given over 100 years of service and pleasure to those who knew her. The nameplate was reproduced to represent the Glasow marine engineers and boilermakers, Ross & Duncan, that were the makers of the engine for the exhibition steam ferry Rowitta. The Tasmanian-built vessel had a long career in Tasmania and Victoria. The nameplate is significant for its connection with the Rowitta, representing the importance of coastal traders to transport, trade and communication in Australia in conjunction with the new rail and motor vehicles. The nameplate is a record of an exhibit at Flagstaff Hill Maritime Village from its early beginnings. Maker's brass nameplate; brass, with embossed text and a hole in each corner. The background is painted red. There are five rows of text; the top row is arranged in an arc. On the bottom row is a number. The nameplate is a replica that was once displayed on the Rowitta vessel at Flagstaff Hill. The reproduction nameplate is for the company Ross & Duncan of Glasgow."ROSS & DUNCAN / ENGINEERS / WHITEFIELD WORKS GLASGOW / NO. 779" flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, steamer, steam ferry, ross & duncan, marine engineers, marine boilers, glasgow engineers, whitefield works, reproduction, scotland, steamer engine, rowitta, sorrento, ss rowitta, navigation, marine technology, steam power, hobart, tasmania, devonport, tasmanian-built, ferry, 1909, early 20th century vessel, passenger vessel, tamar trading company, tamar river, launceston, george town, tarkarri, speculant, peter mcgennan, p j mcgennan & co. port phillip ferries pty ltd, melbourne, coastal trader, timber steamer, huon, karri, freighter, supply ship, charter ferry, floating restaurant, prawn boat, lakes entrance -
Flagstaff Hill Maritime Museum and Village
Equipment - Ship's Telegraph section, Chadburn & Sons, 1875-1898
This is the Bridge Section of a ship’s telegraph and is a Duplex Gong model, made by Chadburn & Son of Liverpool. This duplex gong model would sound two signals whenever the navigational commands were given by the ship’s pilot to change the speed or direction. The ship’s telegraph was installed on Flagstaff Hill’s exhibit of the 1909 Hobart, Tasmania, ferry “SS Rowitta” installed in 1975 and enjoyed for more than 40 years. Communication between the ship’s pilot and the engine room in the late 19th century to the mid-20th-century was made with a system called an Engine Order Telegraph (E.O.T.) or ship’s telegraph. The equipment has two parts, the Bridge Section and the Engine Room Section. The Bridge Section is usually mounted onto a pedestal, and the Engine Room Section is attached to a vertical surface. The standard marine commands are printed or stamped around the face of the dial and indicated by a pointer or arrow that is usually moved by a rotating brass section or handle. The ship’s pilot stationed on the Bridge of a vessel sends his Orders for speed and direction to the Engine Room with the E.O.T. He moves the lever or levers, depending on the number of engines the ship has, to change the indicator on the Bridge Section’s dial to point in the new direction and speed of travel. This change causes the Orders to be duplicated on the Engine Room Section’s dial and a bell or bells to signal the change at the same time. The engineer then adjusts the ship’s engines and steering equipment to follow the pilot’s Order. CHADBURN & SON, Liverpool- Chadburn Brothers, William and C.H., were joint inventors and well-established makers of optical and scientific instruments and marine gauges. The firm was granted the Prince Albert Royal Warrant in the late 19th century. In 1870 William Chadburn applied for a patent for his navigational communication device for use on ships. By 1875 Chadburn & Son was producing the brass Engine Order Telegraph in its plant at 71 Lord Street, Liverpool. In 1911 the ship RMS Titanic was launched, fitted with Chadburn & Sons E.O.T. The Chadburn Ship Telegraph Company Limited was registered in 1898 to take over Chadburn & Sons. In 1903 a large factory at Bootle, near Liverpool, and their products were being sold overseas. In 1920 electric-powered telegraphs were developed. In 1944 the name changed to Chadburn’s (Liverpool) Limited. In 1968 the company became Chadburn Bloctube Ltd. In 2000 the company, now Bloctube Marine Limited, was still manufacturing ship telegraphs. SS ROWITTA: - The 1909 steam ferry, SS Rowitta, was installed as an exhibit at Flagstaff Hill in 1975 and was enjoyed by many visitors for 40 years. Rowitta was a timber steam ferry built in Hobart in 1909 using planks of Huon and Karri wood. It was a favourite of sightseeing passengers along Tasmania’s Tamar and Derwent rivers for 30 years. Rowitta was also known as Tarkarri and Sorrento and had worked as a coastal trading vessel between Devonport and Melbourne, and Melbourne Queenscliff and Sorrento. In 1974 Rowitta was purchased by Flagstaff Hilt to convert into a representation of the Speculant, a historic and locally significant sailing ship listed on the Victorian Heritage Database. (The Speculant was built in Scotland in 1895 and traded timber between the United Kingdom and Russia. Warrnambool’s P J McGennan & Co. then bought the vessel to trade pine timber from New Zealand to Victorian ports and cargo to Melbourne. It was the largest ship registered with Warrnambool as her home port, playing a key role in the early 1900s in the Port of Warrnambool. In 1911, on her way to Melbourne, it was wrecked near Cape Otway. None of the nine crew lost their lives.) The promised funds for converting Rowitta into the Speculant were no longer available, so it was restored back to its original configuration. The vessel represented the importance of coastal traders to transport, trade and communication in Australia times before rail and motor vehicles. Sadly, in 2015 the time had come to demolish the Rowitta due to her excessive deterioration and the high cost of ongoing repairs. The vessel had given over 100 years of service and pleasure to those who knew her. This Bridge section of a ship’s Engine Order Telegraph, used with an Engine Room section, represents late-19th century change and progress in communication and navigation at sea. This type of equipment was still in use in the mid-20th century. The object is significant for its association with its maker, Chadburn & Son, of Liverpool, a well-known marine instrument maker whose work was recognised by English Royalty, and whose products were selected to supply similar equipment for use on the RMS Titanic. This ship’s telegraph is connected to the history of the Rowitta, which was a large exhibit on display at Flagstaff Hill Maritime Village from the museum’s early beginnings until the vessel’s end of life 40 years later. The display was used as an aid to maritime education. The Rowitta represents the importance of coastal traders to transport, trade and communication along the coast of Victoria, between states, and in Australia before rail and motor vehicles. The vessel was an example of a ferry built in the early 20th century that served many different roles over its lifetime of over 100 years. Bridge section of a Ship’s Telegraph or Engine Order Telegraph (E.O.T.). The round double-sided, painted glass dial is contained within a brass case behind glass. It is fitted onto an outward tapering brass pedestal with a round base. The brass indicator arrows between the handles point simultaneously to both sides of the dial when moved. An oval brass maker’s plate is attached to the top of the case. The dial’s faces have inscriptions that indicate speed and direction, and the front face and plate include the maker’s details. A serial number is stamped on the collar where the dial is fitted to the pedestal. The ship’s telegraph is a Duplex Gong model, made by Chadburn & Son of Liverpool. Dial, maker’s details: “PATENT “DUPLEX GONG” TELEGRAPH / CHADBURN & SON / TELEGRAPH WORKS / PATENTEES & MANUFACTURERS / 11 WATERLOO ROAD / LIVERPOOL” LONDON / 105 FENCHURCH STREET” “NEWCASTLE / 85 QUAY + SIDE” “GLASGOW / 69 ANDERSON QUAY” “PATENT” Dial instructions: “FULL / HALF/ SLOW / FINISHED WITH ENGINES / STOP STAND BY / SLOW / HALF / FULL / ASTERN / AHEAD” Maker’s plate: “CHADBURN / & SON / PATENT / LIVERPOOL” Serial number: “22073”flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, engine order telegraph, e.o.t., navigational instrument, communication device, ship’s telegraph, engine room section, bridge section, rms titanic, chadburn & son, chadburn brothers, william chadburn, chadburn ship telegraph company, chadburns, duplex gong, liverpool, ss rowitta, navigation, marine technology, pilot’s orders, steam power, hobart, tasmania, devonport, tasmanian-built, ferry, steam ferry, steamer, 1909, early 20th century vessel, passenger vessel, tamar trading company, launceston, george town, sorrento, tarkarri, speculant, peter mcgennan, p j mcgennan & co. port phillip ferries pty ltd, melbourne, coastal trader, timber steamer, huon, karri, freighter, supply ship, charter ferry, floating restaurant, prawn boat, lakes entrance -
Flagstaff Hill Maritime Museum and Village
Photograph - Vessel, S.S. Rowitta, Early 20th century
The subject of this photograph is the S.S.Rowilla, a passenger steam ferry built in Hobart for use in Tasmania's rivers, the Derwent and the Tamar. The photograph shows her docked at the Charles Street Wharf in Launceston. The S.S. Rowitta was built by Purdon & Featherstone, at Battery Point, Hobart (Tasmania) in 1909 from Huon Pine and Kauri planking. Her final configuration included three masts and a ship rig. S.S. Rowitta took its first voyage from Hobart to Launceston in 1909 and operated for 30 years as a passenger ferry on the Tamar and Derwent Rivers. She also served as a freighter, an army supply ship, a luxury charter ferry and a floating restaurant as well as a prawn boat at Lakes Entrance. (She has also been named “Sorrento” and “Tarkarri”.). In the very early days of Flagstaff Hill ‘Rowitta’ was purchased from Lakes Entrance by Warrnambool City Council and the Victorian State Government for $20,000. The Rowitta had a hull configuration very similar to a local boat named the SPECULANT, which played a key role in the Port of Warrnambool in the early 1900s. The Speculant was the largest ship ever registered with Warrnambool as her home port. Local owner and trader P J McGennan & Co, (Peter McGennan) used her as a freight carrier to Melbourne and timber trader between New Zealand and Victoria. She sunk at Cape Otway in 1911 on a voyage to Melbourne. In 1974 Rowitta was delivered to Port Fairy and then later sailed to Warrnambool’s Breakwater where she was lifted out of Lady Bay and loaded onto the back of a long transport truck and slowly and carefully driven along Pertobe Road, through the Surfside Caravan Park and over the railway line, into Flagstaff Hill’s Maritime Village. Transfer arrangements were coordinated by Jack Morse, of Morse Engineering, a member of the Flagstaff Hill Planning Board, and Ken Goyen, a local crane operator. The ‘Rowitta’ was originally acquired to be rebuilt to match the original SPECULANT. When finances became tight in 1976 a review of all plans ended in the decision to restore the “Rowitta” to her original configuration. She was then restored, renamed the original name of “Rowitta” and installed in the Village’s Harbour Lake to become one of the popular vessels on display for visitors to enjoy. It was the decision of the Advisory Committee to Flagstaff Hill to have Rowitta demolished in April 2015 due to extensive deterioration. Items associated with the Rowitta continue to be held in Flagstaff Hill Maritime Village’s Collection.The photograph of the passenger ferry S.S. Rowitta.is significant for its association with Tasmanian history from the early to mid-1900s. It is also connected to the history of the Rowitta, which was a large exhibit on display at Flagstaff Hill Maritime Village from the museum’s early beginnings until the vessel’s end of life 40 years later. The Rowitta represents the importance of coastal traders to transport, trade and communication along the coast of Victoria, between states, and in Australia before rail and motor vehicles. The vessel was an example of a ferry built in the early 20th century that served many different roles over its lifetime of over 100 years. Black and white photograph of the steamship S.S. Rowitta at Charles Street Wharf, Launceston. It shows the vessel docked at the Charles Street Wharf in Launceston. Smoke is coming from its funnel and there are people on board. There is a handwritten inscription on the top edge of the photograph. The vessel was built in 1909 by Purdon & Featherstone, Hobart. Blue-green handwriting on top left margin "ROWITTA AT LAUNCESTON"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, photograph, s.s. rowitta, charles street wharf,, launceston., purdon & featherstone, rowitta, tarkarri, speculant, purdon & featherstone of hobart, passenger ferry 1909, sorrento -
Ballarat Tramway Museum
Album - Photo Album, Wal Jack, Tasmania, New Zealand and other locations, 1950's
Has some 142 black and white photographs and some colour photographs. Some of the photographs are loose. Sheets have been cut out at the front of the album. Has photos of various locations and lines within Launceston, Hobart, Zeehan, Queenstown, Hiroshima, Kure Japan, Tokyo, Singapore, Bombay, Karachi, Takapuna, Wanganui, Auckland, New Plymouth Wellington, Christchurch, Kelburn, Dunedin, Invercargill, Gisborne and Napier. For details of each photograph and layouts see - /Archive Document files/Reg Item 5011 for letters and details of the album scan sent and images of the negatives. Letters in each sub-directory.Has proven association with Wal Jack and tramway developments within Australasia until 1964 and given their extent particular significance. Features Tasmanian, New Zealand and some foreign country tramcars.Grey covered photograph album with word "Photographs on front cover, with large blue band binding, light brown paper (including one blue sheet of paper) inside covers holding some 21 sheets of card on which photos have been mounted using photo corners of various types, captions in white, blue or black ink. trams, tramways, launceston, hobart, new zealand, japan -
Ballarat Tramway Museum
Photograph, J J N Barnett, "ATEA Conference Tasmania March 1929", March 1929
Photograph of 17 representatives of the Australian Tramway Employees Association Conference in Hobart Tasmania 1929. Many have watch chains with their union badges. Back row - W B Randall SA, M J Stapleton Vic, J M Bergin Vic, A W Banks NSW, Middle row - J H Brown Hobart, E Christie, Vic, G H Bayliss Vic, R Lynch NSW, D Cameron WA, H J Holder Launceston Front row - W A Clementson NSW, A C Warton Vice President, C J Bray Treasurer, J I Abflater Gen President, T Jewell General Secretary, M A McDonald SA, T E Beckman NSW. Photo by J J N Barnett of Hobart. Has a close association with the men list and their union activities.Mounted photograph black and white onto cardboard with names and title printed. Has a coloured image of Madonna on the rear.aeta, union, conferences, hobart -
Moorabbin Air Museum
Document (Item) - Holyman's Airways Domestic Services in Victoria, New South Wales and Tasmania Timetable, Holyman's Airways Daily Air Services
Provides information on daily services provided by Holyman's Airways Pty. Ltd. From Sydney to Hobart via Canberra, Cootamundra, Melbourn, King Island, Flinders Island, Wynard and Launceston. -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Equipment - Gravigard IUD associated with Dr Lachlan Hardy-Wilson, Searle Laboratories
... Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania. Intrauterine ...Copper intrauterine devices (IUDs), first marketed in the early 1970s, represent an important contraceptive option for 150 million women worldwide. The method is safe, rapidly reversible, inexpensive, highly effective, long-acting (up to 20 years for some products [1]), and non-hormonal; these attributes make it unique and desirable for many users. However, increased bleeding and pain cause up to 15% of users to have the device removed within the first year [2]; still higher percentages tolerate some level of these side effects yet retain use of the method. In one study, 67% of women using the TCu380A complained about menstrual side effects within the first year of use [3]. (Hubacher et al, 'Side effects from the copper IUD: do they decrease over time?', 2009)This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Sealed Gravigard IUD in original box. IUD and inserter are sealed inside a sterile plastic pocket. The box is made of cardboard and has an orange top panel with white sides. Text printed on the front of the box reads '1 Sterile Pack/Gravigard*/contraceptive/copper/contraceptive/FRAGILE/Do not bend or crush/SEARLE'. Text printed on side of box reads 'Made in England Supplied by Searle Laboratories, Division of Searle Australia Pty. Ltd., Sydney, Australia'.intrauterine device -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Equipment - Multiload CU250 IUDs associated with Dr Lachlan Hardy-Wilson, Multilan S.A, 1984
... -Wilson, FRCOG, Launceston, Tasmania. Intrauterine device Two flat ...Multiload is an IUD, an intrauterine device used for contraception. The plastic used in this IUD is a mixture of high density polyethylene, ethylene vinyl acetate copolymer and barium sulphate in a weight ratio 44/36/20. (MIMS, October 2013)This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Two flat boxes containing Multiload CU250 intrauterine devices. Front of each box carries an image of a hand holding an IUD inserter, with the Multiload IUD at the top of the inserter, above a blue background on which an image of a vagina has been superimposed. Text printed on the front of the box reads 'MULTILOAD/CU250/intra-uterine/device/Attention:/the enclosed instructions should be followed carefully before insertion of the MULTILOAD-cu250'. Manufacturer's information is printed on the bottom section of the front of the box. Back of each box is printed with distributor information. One box is sealed, and one box is unsealed. Unsealed box contains one IUD, sealed inside a sterile plastic pocket. Back of sterile pocket is printed with an expiration date of 06-12-1984. The IUD is in the form of a small plastic rod, or stem, with two small flexible side-arms. Each side arm has five small protrusions. A copper wire is wound around the stem. A nylon thread with two ends is attached to the bottom end of the stem. Back of sealed box carries a sticker which reads 'Date of manufacture: /12-08-1984'.intrauterine device -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Equipment - Pathology packs for cervical cytology associated with Dr Lachlan Hardy-Wilson, Multilan S.A, 1984
... the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania ...This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Set of four pathology packs. Packs include a cytobrush, spatula, and a slide. The sets are addressed to be sent to Dr Neil Tresize Pathology for examination. intrauterine device -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Equipment - 3" needle attachment associated with Dr Lachlan Hardy-Wilson
... -Wilson, FRCOG, Launceston, Tasmania. Surgery Three-inch needle ...The packing of this needle is an example of an instrument sterilisation process that is no longer employed. This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Three-inch needle attachment wrapped in gauze, padding and cloth. Handwritten scrap of paper inside wrapping reads 'Sterile/22.3.89'. It originally reads as 'Unsterile' but the 'Un' has been crossed out.surgery -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Equipment - Collection of three needle attachments associated with Dr Lachlan Hardy-Wilson
... -Wilson, FRCOG, Launceston, Tasmania. Surgery Three needle ...The packing of these needles is an example of an instrument sterilisation process that is no longer employed. This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Three needle attachments wrapped in gauze, padding and cloth. surgery -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Equipment - 3" needle attachment associated with Dr Lachlan Hardy-Wilson
... -Wilson, FRCOG, Launceston, Tasmania. Surgery Needle wrapped ...The packing of this needle was an example of an instrument sterilisation process that is no longer employed. This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Needle wrapped in gauze, padding and cloth. surgery -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Document - 'Are Pap Smears necessary after a Hysterectomy?' information pad associated with Dr Lachlan Hardy-Wilson
... the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania ...This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.A4 sized paper pad containing a set of single page information sheets about the relevance and usefulness of a papsmear after a hysterectomy. Designed so that pages can be torn off to be given to patients one by one.surgery, women's health -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Equipment - Box of Astra Xylocaine 1% ampoules associated with Dr Lachlan Hardy-Wilson, Astra, c. 1985
... the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania ...Lidocaine (or lignocaine) is a local anaesthetic (numbing medication) that is used to numb an area of your body to help reduce pain or discomfort caused by invasive medical procedures such as surgery, needle punctures, or insertion of a catheter or breathing tube. It is also sometimes used to treat irregular heart rhythms that may signal a possible heart attack, and can be given in an epidural (spinal block) to reduce the discomfort of contractions during labour.This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Cardboard box containing 19 ampoules of Xylocaine 1%. The ampoules are in three strips of five, and one strip of four. Expiry date noted on the box for this medication is August 1985.surgery -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Equipment - Prolene Ethicon suture associated with Dr Lachlan Hardy-Wilson, Ethnor Pty Ltd
... the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania ...Used for surgery. The suture is dyed blue to enhance visibility and does not adhere to tissue, making it more easily removable when ready. It is considered to be relatively biologically inert.This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Sterile suture in packaging. Labelling on packaging reads 'PROLENE Metric 3.5 (0)/ETHICON/TRADE MARK/BLUE MONOFILAMENT POLYPROPYLENE SUTURE/TAPERCUT* V-34/Sterile 36mm Length 75 cm/8444 ETHNOR/PTY LTD SYDNEY'.surgery -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Equipment - 20ml Astra Marcain 0.25% theatre pack associated with Dr Lachlan Hardy-Wilson
... Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania. Surgery Bottle ...Bupivacaine is used as a local anaesthetic. It is given as an epidural injection into the spinal column to produce numbness during labour, surgery, and for certain other medical procedures. It is also sometimes used as an anaesthetic for dental procedures.This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Bottle of medication in sterile packaging. The bottle is 20ml and contains bupivacaine hydrochloride. Label on packaging reads 'STERILE THEATRE PACK/20ml MarcainTM 0.25%/BUPIVACAINE HCI/Store below 25C'.surgery -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Equipment - Plastic specimen jars associated with Dr Lachlan Hardy-Wilson
... the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania ...This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Two clear plastic specimen jars with yellow lids. There is a label stuck to the outside of each jar for recording the contents of any specimen placed in the jar.surgery -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Equipment - Forceps associated with Dr Lachlan Hardy-Wilson
... the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania ...This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Set of straight metal forceps, resembling elongated scissors. The tips of the forceps are serrated for grip, and there is a notch system for clamping the forceps near the handles.surgery -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Equipment - Collection of Pipelle curettes associated with Dr Lachlan Hardy-Wilson, Prodimed, c.1989
... , Launceston, Tasmania. Intrauterine device Four curettes, each ...Used for endometrial biopsy. As described on packaging - 'For histologic biopsy on the uterine mucosal lining or sample extracting of uterine menstrual content.'This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Four curettes, each in an individually sealed package. Each package is labelled 'Unimar/Pipelle TM Endometrial/suction curette.' Distributed by Unimar (USA), manufactured by Prodimed (France). Batch dated 'OCT 89'.intrauterine device -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Equipment - Hollister Amnihook associated with Dr Lachlan Hardy-Wilson, Hollister Incorporated
... the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania ...The Amnihook is an amniotic membrane perforator. It provides a doctor with the ability to artificially rupture the amniotic membrane safely and comfortably without injury to mother or foetus.This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Amnihook perforator in sealed plastic package. The back of the package are printed with instructions for use.intrauterine device -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Equipment - Two Lippes Loop IUDs associated with Dr Lachlan Hardy-Wilson, Ortho Pharmaceutical Corporation
... from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston ...Developed by Dr Jack Lippes in 1962, the Lippes Loop was commonly used as a contraceptive device from the 1960s to the 1980s. Due to its low cost and the ease of inserting and removing the device, it quickly became the most popular IUD in the world during its time. This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Two sealed Lippes Loop IUDs, Size C. IUD and inserter are sealed inside a sterile plastic pocket. Manufacturer information is printed on a cardboard insert which holds each IUD inside the pocket. The packaging of the first Lippes Loop is printed with an expiry date of Jan 83 on the back. The packaging of the second Lippes Loop is printed with instructions for use on the back.l intrauterine device -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Equipment - Lippes Loop IUD associated with Dr Lachlan Hardy-Wilson, Ortho Pharmaceutical Corporation
... from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston ...Developed by Dr Jack Lippes in 1962, the Lippes Loop was commonly used as a contraceptive device from the 1960s to the 1980s. Due to its low cost and the ease of inserting and removing the device, it quickly became the most popular IUD in the world during its time. This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Lippes Loop IUD, Size B. IUD and inserter are sealed inside a sterile plastic pocket. Manufacturer information is printed on a cardboard insert which holds the IUD inside the pocket. The packaging of the IUD is printed with instructions for use on the back.intrauterine device -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Equipment - Two Gravigard IUDs associated with Dr Lachlan Hardy-Wilson, Searle Laboratories
... Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania. Intrauterine ...Copper intrauterine devices (IUDs), first marketed in the early 1970s, represent an important contraceptive option for 150 million women worldwide. The method is safe, rapidly reversible, inexpensive, highly effective, long-acting (up to 20 years for some products [1]), and non-hormonal; these attributes make it unique and desirable for many users. However, increased bleeding and pain cause up to 15% of users to have the device removed within the first year [2]; still higher percentages tolerate some level of these side effects yet retain use of the method. In one study, 67% of women using the TCu380A complained about menstrual side effects within the first year of use [3]. (Hubacher et al, 'Side effects from the copper IUD: do they decrease over time?', 2009)This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Two sealed Gravigard IUDs. IUD and inserter are sealed inside a sterile plastic pocket. Manufacturer information is printed on a cardboard insert which holds each IUD inside the pocket.intrauterine device -
Melbourne Tram Museum
Newspaper - Digital Image, The Examiner, “'Historic' Melbourne trams to call Launceston home”, 9/4/2019
Digital image of newspaper clipping titled: “'Historic' Melbourne trams to call Launceston home”, by Jessica Willard Newspaper article with pictures of two Melbourne trams numbers 742 and 770 being loaded and transported from Newport Railway Workshop to Launceston. Initially they will be put into storage until consultation with local council and community groups. Plans include transforming the trams into indoor seating areas in Riverbend Park. The trams will travel on the Spirit of Tasmania More than 1500 applications were received through the expression of interest process, which was mostly for W-Class trams retired from Victoria's railway and tram network over the past 30 years. VicTrack is in the process of allocating all retired trams from Newport and is expected to take two years.trams, tramways, w class, w5 class, sw5 class, newport workshops, launceston, tram 742, tram 770 -
Uniting Church Archives - Synod of Victoria
Bible, The New English Bible, 1972
... at the first meeting of the SYNOD OF TASMANIA held in Launceston 28th.... This bible was used at the first meeting of the SYNOD OF TASMANIA ...The bible is signed by the Moderator, Secretary and Moderators from 1979-2001Brown leather covered bible with 1377 gilt edged pages in a green box. The bible has green leather end papers. The spine, which is faded, has gilt embossed text. There is a dedication inside the bible."THE UNITING CHURCH IN AUSTRALIA. This bible was used at the first meeting of the SYNOD OF TASMANIA held in Launceston 28th-30th October, 1977. -
Flagstaff Hill Maritime Museum and Village
Equipment - Ship's Wheel, ca. 1975
This is the whip's wheel that was on display for 40 years on the vessel SS Rowitta, installed on the lake at the Flagstaff Hill Maritime Museum and Village as an educational display and attraction. SS ROWITTA: - The 1909 steam ferry, SS Rowitta, was installed as an exhibit at Flagstaff Hill in 1975 and was enjoyed by many visitors for 40 years. Rowitta was a timber steam ferry built in Hobart in 1909 using planks of Huon and Karri wood. It was a favourite of sightseeing passengers along Tasmania’s Tamar and Derwent rivers for 30 years. Rowitta was also known as Tarkarri and Sorrento and had worked as a coastal trading vessel between Devonport and Melbourne, and Melbourne Queenscliff and Sorrento. In 1974 Rowitta was purchased by Flagstaff Hilt to convert into a representation of the Speculant, a historic and locally significant sailing ship listed on the Victorian Heritage Database. (The Speculant was built in Scotland in 1895 and traded timber between the United Kingdom and Russia. Warrnambool’s P J McGennan & Co. then bought the vessel to trade pine timber from New Zealand to Victorian ports and cargo to Melbourne. It was the largest ship registered with Warrnambool as her home port, playing a key role in the early 1900s in the Port of Warrnambool. In 1911, on her way to Melbourne, it was wrecked near Cape Otway. None of the nine crew lost their lives.) The promised funds for converting Rowitta into the Speculant were no longer available, so it was restored back to its original configuration. The vessel represented the importance of coastal traders to transport, trade and communication in Australia times before rail and motor vehicles. Sadly, in 2015 the time had come to demolish the Rowitta due to her excessive deterioration and the high cost of ongoing repairs. The vessel had given over 100 years of service and pleasure to those who knew her. The ship's wheel is an example of the equipment used on a steam ship for navigation. This wheel is connected to the history of the Rowitta, which was a large exhibit on display at Flagstaff Hill Maritime Village from the museum’s early beginnings until the vessel’s end of life 40 years later. The display was used as an aid to maritime education. The Rowitta represents the importance of coastal traders to transport, trade and communication along the coast of Victoria, between states, and in Australia before rail and motor vehicles. The vessel was an example of a ferry built in the early 20th century that served many different roles over its lifetime of over 100 years. Ship's wheel, light coloured wood, eight turned spokes, brass hub in centre with square hold. The wheel was part of the display of the vessel Rowitta at Flagstaff Hill.flagstaff hill maritime museum and village, warrnambool, great ocean road, shipwreck coast, flagstaff hill, maritime village, maritime museum, ss rowitta, navigation, marine technology, steam power, hobart, tasmania, devonport, tasmanian-built, ferry, steam ferry, steamer, 1909, early 20th century vessel, passenger vessel, tamar trading company, tamar river, launceston, george town, sorrento, tarkarri, speculant, peter mcgennan, p j mcgennan & co. port phillip ferries pty ltd, melbourne, coastal trader, timber steamer, huon, karri, freighter, supply ship, charter ferry, floating restaurant, prawn boat, lakes entrance, ship's wheel, ship's steering wheel, ship's steering, direction -
Wodonga & District Historical Society Inc
Photograph - Ernie May - Wodonga Bandmaster
Born in Hammersmith, London, England in 1903, Ernie May migrated to Australia at the age of 19 years old. A printer by trade, Ernie worked on the land at Woodburn, near Wonthaggi, then near Smithton, Tasmania. He then returned to his trade at the Launceston Daily Telegraph and then with the Rainbow Argus in the Victorian Mallee. Arriving in Wodonga in 1927, Ernie was employed by Mr Charles Ryan who at the time owned the "Wodonga Sentinel" newspaper. He quickly became involved in community activities. Ernie was President of the Border and Northeast Band Association, Secretary of Wodonga Rifle Club for 20 years and Secretary of the Public Library for 15 years. When Ernie May was Wodonga Bandmaster, the Wodonga Band played at Saturday afternoon football matches as well as other public appearances. At that time the Wodonga Band had 30 members. Ernie also conducted his own dance band. In 1952, Mr May and his wife moved to Sale, gaining employment firstly with the Enterprise Press, then the Gippsland Times. In 1957 he started up a monthly paper at Phillip Island. Not content with so many years as Bandmaster at Wodonga, Ernie May became Bandmaster for Phillip Island's brass band. After 50 years in the printing business Ernie and his wife Cicely retired in Cowes, Phillip Island where he passed away on 29th December 1977.These images are significant because they depict a former member of the community who made an important contribution to Wodonga over a period of 25 years.A collection of black and white images of Ernie May, Wodonga Bandmasterernie may, wodonga band, wodonga sentinel -
Bendigo Historical Society Inc.
Newspaper - Lydia Chancellor collection: New arrivals
1. Rev Harry George Mackay (30/5/1914 - 9/9/1988) was born in Sheffield, Tasmania. He served part time as a chaplain during WW2 (V517227) After the war he married Thelma Muriel Phillips (10/6/1920 - 13/7/2008) in 1946. They are both buried at the Mornington Cemetery. 2. Mr John Brown Hamlett was born in England. In 1951 he married Audrey Sommerville in in Scottsdale, Tasmania. Their first son, David was born in Tasmania in 1952. In 1954, John was preaching in the Launceston Methodist circuit.Bendigo Advertiser from 02/02/1962 and 05/02/1964. Two articles introducing three new families who have moved to Bendigo. These are the family of H.G. Mackay minister of the Wesley church in Forest Street, Rev, Baldwin of the Arnold Street circuit and Rev. J.B. Hamlett in charge of the Eaglehawk Methodist Circuit.bendigo advertiser, rev. hamlett, minister mackay, rev. baldwin -
Bendigo Historical Society Inc.
Document - BILL ASHMAN COLLECTION: VACUUM MAP OF TASMANIA
Vacuum Road Map of Tasmania and Complete Touring Information with the Compliments of the Vacuum Oil Company Pty Ltd. Coloured map of Tasmania with trucks, aeroplane, oil bottles and petrol bowsers in the margins. Alphabetical Index of Towns, Lakes, Mountains, Bays, Capes, etc., with key and Licensed Public Aerodromes in Tasmania and Their Location. On the back is Outlets of Hobart, Outlets of Launceston, What to See in Hobart, Beauty Spots and Tourist Information, What to See in Launceston, Vacuum Products, Traffic Hints, Super Plume or Plume, Making Sure of a Trouble-Free Trip and the front cover picture of a lady, child and a man in their car at the petrol bowser. Map folds up and is kept in a light green folder.map, bill ashman collection - correspondence, vacuum road map of tasmania and complete touring information, vacuum oil company pty ltd