Horse harness that connects a horse to a horse drawn vehicle 2 types 1. breast collar or breast strap 2. full collar or collar-and-hames. On either side of the collar are wooden or metal bars called hames.Used by farmers in the Kiewa ValleyShort knob top, forged hook, nut and bolt joint, loose rein ring, chain bottom, steel cased. They go on the collar and are made of two metal strips which take the full force of the pull padded by the collar.horse equipment, hames, horse collar

Filmosound GB Bell & Howell film projector c1950, wood and masonite, two tone grey casing, metal projector inside, 16mm, 110v, 10amp, 2 reels. Tripod stand, metal grey with wing nut and screw adjustment.7 rar, projector, filmosound, nui dat, infantry

Moffat Virtue No 9 shearing handpiece with GRAZCOS label. Handpiece has duck feet yokes and grit proof nut equivilent to Lister design. Missing rear leather retaining ring. C.1892, used up until the 1950's.from/GRAZCOS/ CO-OPERATIVE LIMITED/ 90 WILLIAM STREET MELBOURNE Moffat Virtue No 11shearing, grazcos co-operative limited

Nickel plated skim milk and cream separator. Splits into six pieces; some pieces are believed to be missing. Two pieces are cylindrical and have long spouts that curve downwards at the ends. Conical shaped piece which goes in centre and has hole through the middle (This piece has removable brass screw). Long straight rod with wooden handle and small, threaded section at other end. Rounded, circular rubber band, probably used as seal. Large round pot with thin flanged rim, seated on raised base edges. Tap with fitting on one side. Round piece with three evenly spaced legs. both sides slightly domed - fits into upper separator piece.On the brass nut of the conical shaped piece is engraved "unscrew" with an arrow adjacent. "10516-C" with another arrow and oval shaped trademark with lines inside. Embossed on the external casing of the conical piece is "2".food technology, dairying, milk, cream, dairy, separator, nickel, steel.

This spanner, part of a raker/jointer/guage set which is a sharpening tool for cross cut logging saws. The logging saws used in the early 1900's for the clearing of forests required constant sharpening of their "cutting teeth". The logging of forested areas during these times was very much a "hands on" method of either one or two men by the use of saw or hand axe. Chain saws, chain and ball(clearing) and bulldozing methods came in the mid 1900's.This particular spanner was part of a crosscut saw sharpening tool and method was used by surveyors laying down boundaries for the S.E.C. Victoria Hydro Electricity Scheme (1920's). This item was given to a local Kiewa Valley lad who accompanied the initial surveyors. The lad was responsible for the tendering and feeding of the surveyors "pack horses". Surveys during this period and in the dense mountainous terrain of the Victorian Alps was both exhausting and hazardous. Overnight accommodation at various log cabins was not always possible and swag/tent alternative was the "fall back"This small spanner is part of the Raker/Jointer Gauge saw set and is made from forged steel. The nut grip is of the two tightening nuts on the main construction frame. See KVHS 0090 (A &B) for the other items making up the sharpening tools.hand tool, saw, sharpening method, tree felling.

Heavy Duty Rake, with attachment to 2.5cm waterpipe fitting. 8 steel prongs are fitted with a flat steel scraper (50 x 8cm x 3mm) at the end, held in place with two steel clamps and two hex bolts and nut each

Lieut Percival Edward Nuttal was born in Kyneton, 14 April 1885. He served in WW1, 50th BN AIF and was decorated with both a Military Cross and a Military Medal. This framed history of his service is part of a display which includes photographs and replicas of his medals.Framed A4 page of Percy Nuttall historyPercy Nuttall made a life member in 1938nuttal, military cross

Item issued to Victor Henry Evans No 418655 RAAF. Refer Cat No 1760.4Emergency Ration pack issued to RAAF .1) Tin containing fruit and nut blocks, hot chocolate, salt tablets , tea tablets. .2) Lid for tin, inside is printed instructions for use. Remnants of sellotape on both items .1) and .2) Khaki colour.ration pack, emergency, raaf, accessory

In 1988, as part of a Defence of Mainland Australian policy, defence of facilities of strategic importance in northern Australia were allocated to Army Reserve units. ‘A’ Squadron was allocated the defence of Tindal Air Force base located 15 KM outside Katherine in Northern Territory. Consequently the Squadron deployed on Exercise ‘Northern Explorer’ to gain first-hand knowledge of operating conditions for mounted and dismounted patrolling in the area.Lance Corporal R. Van De Velde, ' A ' Squadron 8/13 VMR during Exercise ' Northern Explorer' September 1988. LCpl Van De Velde has a collection of Pandamus Palm nut prematurely ripened by fire near King River Northern Territory.

Small's Club Chocolate was initially promoted as chocolate for men.Small's chocolate showbag, no content: paper bag with paper handle, both sides showing three chocolate bars from their range; with one side advertising Club chocolate, Flowing Peppermint, and Milk chocolate; the other side, Fruit'n'Nut, Cherry Slice, and Bar O' Nut; in colour[obverse] Small's" / Small's / Club / CHOCOLATE / NOT / SO / SWEET / 3 OZ NET / Small's / CLUB CHOCOLATE / Flowing / Peppermint / 3 OZ 2 DR NET / Small's / Milk / Chocolate / 3 OZ NET / Milk & Club Chocolate /confectionery, small's, small's club chocolate, chocolate, showbag

Porthole, painted blue, with hinged locking bolts welded to base plate. Base plate has six bolt holes, one till with bolt and nut. Base plate has glass plate as does hinged porthole. Corrosion and paint peeling. Both plates of glass have cracks. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, porthole, ship fitting

Hand brake pawl, possibly from a cable or horse tram, smaller than an electric tram version consisting of a cast or forged pawl with a forged, turned and threaded bolt, steel washer and nut. Components have been removed from very rotten wooden floor. Possibly c1900tramcars, brakes, handbrakes

Shearing handpiece inscribed "MUNRO / 4134/ MADE IN ENGLAND", "MUNRO/ PAT. APPLIED FOR/ OIL", "REGISTERED DESIGN". Munro manufacturers in Ballarat, created by George Munro c.1927. Handpeice manufactured in England by Burgon and Ball (Sheffield) for Austrlaian market. Handpiece contains Wolseley start spindle similar to Burgon, missing a 'bush' in tension nut.Metal, leather and plastic shearing handpiece inscribed "MUNRO / 4134/ MADE IN ENGLAND", "MUNRO/ PAT. APPLIED FOR/ OIL", "REGISTERED DESIGN". Plastic hand piece with leather casing attached with wire, covering swivel joint."MUNRO/ PAT. APPLIED FOR/ OIL" Munro 4134 made in england Registered designshearing

German silver (nickel silver) mesh purse. "Drawstring" top through hoops attached to body of purse. Decorative "nut" terminals on end of two chains (one each side of body). Single layer mesh lower edge border with 11 small balls suspended. Two holes in border.mesh, german silver, purse

HMAS Sydney was paid off in 1928 and broken up in 1929 and sunk off Sydney Heads. Numerous souvenirs – from fruit and nut bowls, ash trays, match holders, tobacco jars and paperweights to specially framed prints of the Sydney – were fashioned from teak and other wood fittings salvaged from the Sydney before she was scuttled.Brass ashtray made from brass sourced from used shell cases H.M.A.S. SydneyH.M.A.S. Sydney

Shearing handpiece with leather covered handle inscribed "THE LISTER SHEEP SHEARING MACHINE DURGLEY ENGLAND", "LISTER SHARPENED 62554". Patent 4385/25. Lister S is model after the Lister No. 3. Handpiece contains genuine rear joint, leather retaining ring, and grit proof nut that stops dirt from entering handpeice. C. 1930's.THE LISTER SHEEP SHEARING MACHINE DURGLEY ENGLAND Lister Pat. no. 4385/26shearing

An adjustable or shifting spanner or adjustable wrench is an open-end wrench with a movable jaw, allowing it to be used with different sizes of fastener head (nut, bolt, etc.) rather than just one fastener size, as with a conventional fixed spanner. Early settlers were self reliant and repaired their own equipment for kitchen,dairy, farm, horses, carts using various tools . This steel shifting spanner is typical of the type used by early settlers in Moorabbin Shire c1930A large heavy steel curved neck shifting spanner with adjustable screwFLAG BRAND / MADE IN GERMANYtools, spanners, shifting spanners, wrenches, early settlers, market gardeners, blacksmiths, tools, building equipment, hammers, moorabbin shire, bentleigh, mckinnon, highett, cheltenham,mcewan james pty ltd, melbourne, bunnings pty ltd,

1. 2 x Cylinder shaped tins with lids on both ends - used for cooking nutloaf. The top lid is removable and has 9 perforated holes. One tin has a label on the side which has been added for display purposes (see below) 2. Centenary Certificate from Willoware to Thomas O'Sullivan 3. Willow Centenary book 1887-1987 and photocopy pages of Willowware history1. Nutloaf tin: Willow, Nutloaf, top, 6 3/4 x 3 1/8, made in Australia (on top lid) / Willow Australia, Nut Loaf, 170mm x 80mm (on bottom lid) / Willow Ware "Nut Loaf" Tin First made early 1900's (on the side of the cylinder) / Canister Manufacturers Wilson Bros North Melbourne (stamped on paper on the side of the cylinder) 2. as per photo Also.....handwritten "Left the company in1998 (43 years service) 3. Willow 1887-1987 on front of bookletwillow ware, willow, kitchen, cooking, nutloaf tin, certificate, centenary

Foreign currency issued by Japanese Forces in WW2. Aim was to take economic control of countries occupied and to diminish western influences with these countries. Items in collection of Richard William McGILVERY, RAAF. refer Cat No.7287P for his service records, photos and awards.One Gulden notes issued by Japanese Occupation. Four notes basically brown in colour. Cloud emblems on one side with No. 1 and other side a picture of fruit and nut trees. Has "De Japansche Regeering Betaalt AAN Tronder EEN GULDEN". Translated to "The Japanese Government Pays to Bearer One Gulden."Inscribed "De Japansche Regeering Betaalt AAN Tronder EEN GULDEN" and No. 1.japanese occupation forces, foreign currency, gulden, richard william mcgilvery

Framed B & W photograph featuring Korumburra Shire Councillor Richard Nutter Scott. Set in cream card window mount with hand written descriptive text and statement of service below the image. A cut-out panel below this text features a copy of a hand written resignation signed by Councillor Scott in 1956.

The Improved Martin-Adelphi Anchor. The introduction of cast steel in 1894 led to the improved Martin-Adelphi pattern, in which the crown and arms are cast in one, and, with the stock, are made of cast steel, the shank remaining of forged iron. A projection in the crown works in a recess (right image), and is secured in its place by a forged steel pin, fitted with a nut and washer, which passes through the crown and the heel of the shank.Stock-anchor - improved Martins patent, Adelphi pattern improved Martins patent anchor, Adelphi pattern

The Squirrel is a small to medium sized member of the rodent family Sciuridae. They are commonly located in America, Eurasia and Africa. The Squirrel was introduced to Australia by humans. Interestingly, the tail of the Squirrel serves the purpose of keeping the rain, wind or cold off the body of the animal, to help it cool off in hot weather, to counterbalance when moving and can be utilized as a parachute when jumping from one location to the next. Squirrels consume foods that are rich in protein, carbohydrates and fats. They eat nuts, seeds. fruits and vegetation. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum and the National Museum of Victoria, as well as individuals such amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century.The Carolina Squirrel specimen has dark coloured fur with paler colouring on the face and hands. It grasps a nut between its hands and stands on a wooden platform. A paper tag hangs from the right arm with a smaller tag attached to the left. The squirrel has dark black glass eyes and sharp claws on the hands and feet. A.4481 BMM7535 35. Carolina Squirrel / Catalogue, Page, 49 /taxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, reynell eveleigh johns, squirrel

A Hobbies' steel tennis racquet, with a vinyl handle grip winding up the tapering shaft to the open throat. Head of racquet is tension tightened, as can be seen by the screw, nut, and spring projecting from the base of the head. Racquet string is piano wire. Materials: Metal, Glue, Paint, String, Glue, Vinyl, Leather, Inktennis

Manufactured by F.E. Kohler & Co, Canton, OhioA vintage post hole digger with two long wooden handles and two metal scooped blades. It is operated with a lever action, with the two handles pulled apart to take a 'bite' of earth. The handles are attached by a nut and bolt. There is a crowbar on the end of one handle and a rammer on the end of the other. The brand is F.E. Kohler & Co, Canton, Ohio.'Kohler Little Giant' patented.tools, agricultural tools, farming equipment, garden tools

The 1950's saw a revolution in small appliances for use in the average household. This hand held wrench was provided exclusively for the Coleman self heating kerosene (KVHS 0347A) iron and used for the regular changing the kerosene used in it. The iron was used before and during the electricity supplies available from the Kiewa Hydro Electricity Scheme. These irons remained in use within regional rural areas that had limited or unreliable electrical reticulation. Kerosene supplies were cheaper than electricity but also more inconvenient than electric. Electrical appliances become cheaper to buy and maintain in the later part of the 1900's and the now older kerosene iron was faded out.This wrench was required to open the fuel container which stored kerosene in the Coleman hand iron(see KVHS 0347A). This item was part of the maintenance requirement of this particular hand iron. In the 1950s and later the Kiewa Valley was still a relatively isolated region which was home to rural properties and small settlements. The availability of electricity and or the financial means to afford new types of electric hand irons ensured that older and sometimes less efficient ironing remained for an extended period covering the 1960s to 1970s. Kerosene products, such as this kerosene iron was a cheaper method for farm based domestic and other rural activities requiring a heat source. The use of kerosene as a heat/light source was able to be supplied in bulk and able to be used when floods severed vital roads into this region. The supply of electricity was in summer time subject to interruption from bush fire damaged wooden poles carrying the electrical cables. Self sufficiency by rural populations was the backbone of survival(use of this wrench was a part of rural life). The ability to store energy sources "on the farm" was a prerequisite of isolated regions, such as the Kiewa Valley, circa 1950s.This item is a flat cast iron wrench, which has been specifically made for KVHS 0347A (kerosene iron). The wrench has four specific forms cut into the steel which fit firmly around their targeted nut and other fixtures. Also see See KVHS 0347B- Instruction sheet; and KVHS 0347D Fuel can.ironing, iron maintenance tool, domestic appliances, household

Jonathan Harris operated a winery on the banks of the Axe Creek, Axedale in the 1850s. Metal hook combination is made from one and a half centimetre diameter metal in two pieces, with four centimetre circles on each end 40 centimetres long. They are joined at the top by a threaded section with a square nut, a thin metal washer and a one centimetre thick four centimetre wide square metal piece. Part of the Harris Collectionagriculture, farm, hanging hooks

Pittock collection: nine assorted metal spanners * seven double ended steel spanners, 155-250 mm L * one single ended 24 mm nut, 140 mm L * one odd tool, 140 mm L * some manufacturer's numbering Items stored in Pittock coach builder's box, reference 13000.1.

Early form of home heating and because of the copper dish was considered one of the better models|Manufacturing History Museum Victoria|Commentary: Australian manufacturing history Philip Wollen|Many years ago, when I was an ambition young man, I took over a company called Hecla.|This business was formed in 1872, long before Federation was even contemplated. The company established a rich tradition in the Australian manufacturing industry. The prodigious product range included kettles, mixers, toasters, hairdryers, urns, pie warmers, bain maries, and electric blankets for the domestic and commercial market. During the war it even manufactured parts for aircraft. It was one of Melbourne's largest employers.|Hecla was one of the pioneers in TV advertising, led by icons like Bert Newton, Bobby Limb, Evie Hayes and Graham Kennedy who ad Jibbed his way through irreverent and unscripted naughtiness about Hecla electric blankets and foot warmers. The slogan was 'By Hecla, its good.'. One can imagine the fun Bert and Graham had with their double entendres.|In the 60's Hecla entered into a partnership with General Electric and expanded rapidly. The massive factory, on the corner of Alexandra Parade and Chapel Street overlooking the Yarra River was a Melbourne landmark.|The business was formed by one of the scions of Melbourne industry. Mr Marriott was a metal worker of some repute, building the lights in front of Melbourne's Parliament House, the first steam car, the sideboard at the RACY Club, and the first factory to run on electricity.|By the time I acquired the company it was a shadow of its former self, incapable of competing with cheap Chinese imports. Wandering around the warehouse late one night I discovered a large, boarded up storeroom which appeared not to have been opened in decades.|Over several months I combed through the room, unearthing a treasure trove of products from a bygone era. Dusty files, engineering drawings, wooden prototypes, patent records, and correspondence from distributors on every continent.|I decided to track down an old man, Ray, long retired after 50 years with Hecla. He was not well off financially and welcomed the paid work. It turned out that he had done his apprenticeship with the company and there wasn't much he didn't know about it. He had been personally involved in the manufacture of almost every type of product on the Hecla smorgasbord's of products.|So for over 2 years he methodically assembled a mini museum of Hecla products, painstakingly polishing them and ensuring they were in working order. He attached the original brochure of each product and their respective warranty cards. For him it was ,a labour of love. For me it was a fascinating, if vicarious journey, into Australia's manufacturing past.|My colleagues complained that I was wasting money on his salary, our time and factory space on stuff that should have been dumped years ago. I tried to explain that I was merely a steward of the Hecla tradition, not merely an owner. Besides, the look on Ray's face convinced me that there was another dynamic at work. One I could see, but didn't really understand.|After he Passed away I faced a dilemma. What to do with this 'museum' of Hecla history. Nobody was interested.|So I kept the 'stuff' in private storage, hoping that same day someone would be interested in it. And the years passed.|Finally, I had a brainwave. Perhaps the Melbourne Museum would be interested. It was a long shot but I made the call. I had a nagging suspicion that they would think I was simply trying to get them to relieve me of paying for this huge collection to be taken to the tip.|To my surprise they said they would be willing to take a look, I secretly hoped that they would take the whole collection and not leave me with an incomplete jumble of appliances that I would indeed have to take to the tip.|On the appointed day, four serious looking young people showed up. Armed with digital cameras, note books and poker faces they spent four hours analysing the goods and the supporting materials. I asked them if they had any interest and their response was decidedly non-committal. It depends on the acquisitions committee, I was told. I was disheartened and packed up the exhibits to go back into storage.|Imagine my surprise when months later they telephoned to say that they had researched the history of the company, and yes, they would like to take the whole collection. And a truck with 'handlers' would arrive the following day to pick it up. Two years ago all Hecla's archives left me forever and went to the Museum's warehouse.|Well, to my delight I received a call yesterday inviting me to a private viewing of the exhibition at the Melbourne Museum. These young historians had meticulously assembled an impressive display of Melbourne's industry and technology going back to the 1800's. They thanked me like a significant benefactor when it is I who should have thanked them.|I saw the excitement in the eyes of these young people who had somehow managed to dig out and assemble memories from Australia's past. If this is the standard of care that the curators of the Melbourne Museum show all their exhibits, our history is in safe hands.|Their meticulous work took me back to those years long ago when I saw an old man lovingly assembling and cataloging a lifetime of his work.|It took me back to the day when Australians actually made things. Long before we became a nation of quarrymen. Before we became animal-factory 'farmers'. Of a time when products didn't break down, or dumped and replaced before the warranty expired. When men like Mr Marriott cared deeply about what their hands produced.|It reminded me of the call I received from an elderly lady in Tasmania asking for the electrical element for a Hecla K7 kettle. I searched the archives and called her back. The K7 was produced decades earlier and we no longer carried that spare part. She was quite disheartened and told me her kettle had finally 'given up the ghost' and she couldn't bear to part with it. It was a present from her husband on their wedding day 45 years ago. Her final words were 'they don't make them like that, do they? By Hecla they were good.'|I'm glad I followed my instinct and put Ray back on the payroll all those years ago..|I like to think Mr Marriott would have been pleased.Pedestal radiator. Base is cast iron with three feet with rose design on each. Pedestal supports a copper spherical reflector plate which has an electrical connection box at its base. The connection box is joined to the pedestal by a screw and nut to enable the reflector to be tilted. The element is cone shaped and is in the centre of the plate. The element is protected by a wire guard.Hecla Firedomestic items, heating

This item would have been made as a stand to display shoes in a shop. It may have been made locally in Warrnambool. As this item was donated to the Warrnambool and District Historical Society by a member of the Dickson family some years ago, it is highly likely that the stand was used for display purposes in the Warrnambool department store of Cramond and Dickson. This store, selling mainly men’s and ladies’ wear, was established by John Cramond and James Dickson in Warrnambool in 1853 in Timor Street and it later moved to Liebig Street, closing in 1973. This stand is of interest as an example of the type of stand used for display in shops early to mid 20th century. It is also significant as a possible memento of the Cramond and Dickson shop which was so important in Warrnambool’s history.This is a shoe stand with a wooden stick or pole tapering slightly to the top and ridged in three places. The pole is mounted on a wooden pedestal which is rectangular-shaped and which is indented to form a smaller rectangular base. A small wooden piece in the shape of a flat bottom of a shoe is attached to the pole with a metal bolt and nut. This enables the shoe piece to remain flat or to be tilted at various angles. cramond and dickson store, warrnambool, history of warrnambool, shoe display