Nickel plated skim milk and cream separator. Splits into six pieces; some pieces are believed to be missing. Two pieces are cylindrical and have long spouts that curve downwards at the ends. Conical shaped piece which goes in centre and has hole through the middle (This piece has removable brass screw). Long straight rod with wooden handle and small, threaded section at other end. Rounded, circular rubber band, probably used as seal. Large round pot with thin flanged rim, seated on raised base edges. Tap with fitting on one side. Round piece with three evenly spaced legs. both sides slightly domed - fits into upper separator piece.On the brass nut of the conical shaped piece is engraved "unscrew" with an arrow adjacent. "10516-C" with another arrow and oval shaped trademark with lines inside. Embossed on the external casing of the conical piece is "2".food technology, dairying, milk, cream, dairy, separator, nickel, steel.

Lieut Percival Edward Nuttal was born in Kyneton, 14 April 1885. He served in WW1, 50th BN AIF and was decorated with both a Military Cross and a Military Medal. This framed history of his service is part of a display which includes photographs and replicas of his medals.Framed A4 page of Percy Nuttall historyPercy Nuttall made a life member in 1938nuttal, military cross

This type of wrench was called an adjustable twisted steel monkey wrench and was made around 1900. It was different from ordinary spanners and wrenches by the nature of the jaws being able to adjust to fit an individual nut, bolt or other fitting. The twisted handle wrenches were often forged by handtwist design on handle; jaws bent out of shape and worn. Hand-madechurchill island, tool, adjustable wrench, hand tool

Item issued to Victor Henry Evans No 418655 RAAF. Refer Cat No 1760.4Emergency Ration pack issued to RAAF .1) Tin containing fruit and nut blocks, hot chocolate, salt tablets , tea tablets. .2) Lid for tin, inside is printed instructions for use. Remnants of sellotape on both items .1) and .2) Khaki colour.ration pack, emergency, raaf, accessory

In 1988, as part of a Defence of Mainland Australian policy, defence of facilities of strategic importance in northern Australia were allocated to Army Reserve units. ‘A’ Squadron was allocated the defence of Tindal Air Force base located 15 KM outside Katherine in Northern Territory. Consequently the Squadron deployed on Exercise ‘Northern Explorer’ to gain first-hand knowledge of operating conditions for mounted and dismounted patrolling in the area.Lance Corporal R. Van De Velde, ' A ' Squadron 8/13 VMR during Exercise ' Northern Explorer' September 1988. LCpl Van De Velde has a collection of Pandamus Palm nut prematurely ripened by fire near King River Northern Territory.

Small's Club Chocolate was initially promoted as chocolate for men.Small's chocolate showbag, no content: paper bag with paper handle, both sides showing three chocolate bars from their range; with one side advertising Club chocolate, Flowing Peppermint, and Milk chocolate; the other side, Fruit'n'Nut, Cherry Slice, and Bar O' Nut; in colour[obverse] Small's" / Small's / Club / CHOCOLATE / NOT / SO / SWEET / 3 OZ NET / Small's / CLUB CHOCOLATE / Flowing / Peppermint / 3 OZ 2 DR NET / Small's / Milk / Chocolate / 3 OZ NET / Milk & Club Chocolate /confectionery, small's, small's club chocolate, chocolate, showbag

Shearing handpiece inscribed "MUNRO / 4134/ MADE IN ENGLAND", "MUNRO/ PAT. APPLIED FOR/ OIL", "REGISTERED DESIGN". Munro manufacturers in Ballarat, created by George Munro c.1927. Handpeice manufactured in England by Burgon and Ball (Sheffield) for Austrlaian market. Handpiece contains Wolseley start spindle similar to Burgon, missing a 'bush' in tension nut.Metal, leather and plastic shearing handpiece inscribed "MUNRO / 4134/ MADE IN ENGLAND", "MUNRO/ PAT. APPLIED FOR/ OIL", "REGISTERED DESIGN". Plastic hand piece with leather casing attached with wire, covering swivel joint."MUNRO/ PAT. APPLIED FOR/ OIL" Munro 4134 made in england Registered designshearing

Porthole, painted blue, with hinged locking bolts welded to base plate. Base plate has six bolt holes, one till with bolt and nut. Base plate has glass plate as does hinged porthole. Corrosion and paint peeling. Both plates of glass have cracks. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, porthole, ship fitting

Hand brake pawl, possibly from a cable or horse tram, smaller than an electric tram version consisting of a cast or forged pawl with a forged, turned and threaded bolt, steel washer and nut. Components have been removed from very rotten wooden floor. Possibly c1900tramcars, brakes, handbrakes

HMAS Sydney was paid off in 1928 and broken up in 1929 and sunk off Sydney Heads. Numerous souvenirs – from fruit and nut bowls, ash trays, match holders, tobacco jars and paperweights to specially framed prints of the Sydney – were fashioned from teak and other wood fittings salvaged from the Sydney before she was scuttled.Brass ashtray made from brass sourced from used shell cases H.M.A.S. SydneyH.M.A.S. Sydney

Shearing handpiece with leather covered handle inscribed "THE LISTER SHEEP SHEARING MACHINE DURGLEY ENGLAND", "LISTER SHARPENED 62554". Patent 4385/25. Lister S is model after the Lister No. 3. Handpiece contains genuine rear joint, leather retaining ring, and grit proof nut that stops dirt from entering handpeice. C. 1930's.THE LISTER SHEEP SHEARING MACHINE DURGLEY ENGLAND Lister Pat. no. 4385/26shearing

German silver (nickel silver) mesh purse. "Drawstring" top through hoops attached to body of purse. Decorative "nut" terminals on end of two chains (one each side of body). Single layer mesh lower edge border with 11 small balls suspended. Two holes in border.mesh, german silver, purse

An adjustable or shifting spanner or adjustable wrench is an open-end wrench with a movable jaw, allowing it to be used with different sizes of fastener head (nut, bolt, etc.) rather than just one fastener size, as with a conventional fixed spanner. Early settlers were self reliant and repaired their own equipment for kitchen,dairy, farm, horses, carts using various tools . This steel shifting spanner is typical of the type used by early settlers in Moorabbin Shire c1930A large heavy steel curved neck shifting spanner with adjustable screwFLAG BRAND / MADE IN GERMANYtools, spanners, shifting spanners, wrenches, early settlers, market gardeners, blacksmiths, tools, building equipment, hammers, moorabbin shire, bentleigh, mckinnon, highett, cheltenham,mcewan james pty ltd, melbourne, bunnings pty ltd,

The Improved Martin-Adelphi Anchor. The introduction of cast steel in 1894 led to the improved Martin-Adelphi pattern, in which the crown and arms are cast in one, and, with the stock, are made of cast steel, the shank remaining of forged iron. A projection in the crown works in a recess (right image), and is secured in its place by a forged steel pin, fitted with a nut and washer, which passes through the crown and the heel of the shank.Stock-anchor - improved Martins patent, Adelphi pattern improved Martins patent anchor, Adelphi pattern

Foreign currency issued by Japanese Forces in WW2. Aim was to take economic control of countries occupied and to diminish western influences with these countries. Items in collection of Richard William McGILVERY, RAAF. refer Cat No.7287P for his service records, photos and awards.One Gulden notes issued by Japanese Occupation. Four notes basically brown in colour. Cloud emblems on one side with No. 1 and other side a picture of fruit and nut trees. Has "De Japansche Regeering Betaalt AAN Tronder EEN GULDEN". Translated to "The Japanese Government Pays to Bearer One Gulden."Inscribed "De Japansche Regeering Betaalt AAN Tronder EEN GULDEN" and No. 1.japanese occupation forces, foreign currency, gulden, richard william mcgilvery

1. 2 x Cylinder shaped tins with lids on both ends - used for cooking nutloaf. The top lid is removable and has 9 perforated holes. One tin has a label on the side which has been added for display purposes (see below) 2. Centenary Certificate from Willoware to Thomas O'Sullivan 3. Willow Centenary book 1887-1987 and photocopy pages of Willowware history1. Nutloaf tin: Willow, Nutloaf, top, 6 3/4 x 3 1/8, made in Australia (on top lid) / Willow Australia, Nut Loaf, 170mm x 80mm (on bottom lid) / Willow Ware "Nut Loaf" Tin First made early 1900's (on the side of the cylinder) / Canister Manufacturers Wilson Bros North Melbourne (stamped on paper on the side of the cylinder) 2. as per photo Also.....handwritten "Left the company in1998 (43 years service) 3. Willow 1887-1987 on front of bookletwillow ware, willow, kitchen, cooking, nutloaf tin, certificate, centenary

The Squirrel is a small to medium sized member of the rodent family Sciuridae. They are commonly located in America, Eurasia and Africa. The Squirrel was introduced to Australia by humans. Interestingly, the tail of the Squirrel serves the purpose of keeping the rain, wind or cold off the body of the animal, to help it cool off in hot weather, to counterbalance when moving and can be utilized as a parachute when jumping from one location to the next. Squirrels consume foods that are rich in protein, carbohydrates and fats. They eat nuts, seeds. fruits and vegetation. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum and the National Museum of Victoria, as well as individuals such amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century.The Carolina Squirrel specimen has dark coloured fur with paler colouring on the face and hands. It grasps a nut between its hands and stands on a wooden platform. A paper tag hangs from the right arm with a smaller tag attached to the left. The squirrel has dark black glass eyes and sharp claws on the hands and feet. A.4481 BMM7535 35. Carolina Squirrel / Catalogue, Page, 49 /taxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, reynell eveleigh johns, squirrel

A Hobbies' steel tennis racquet, with a vinyl handle grip winding up the tapering shaft to the open throat. Head of racquet is tension tightened, as can be seen by the screw, nut, and spring projecting from the base of the head. Racquet string is piano wire. Materials: Metal, Glue, Paint, String, Glue, Vinyl, Leather, Inktennis

Manufactured by F.E. Kohler & Co, Canton, OhioA vintage post hole digger with two long wooden handles and two metal scooped blades. It is operated with a lever action, with the two handles pulled apart to take a 'bite' of earth. The handles are attached by a nut and bolt. There is a crowbar on the end of one handle and a rammer on the end of the other. The brand is F.E. Kohler & Co, Canton, Ohio.'Kohler Little Giant' patented.tools, agricultural tools, farming equipment, garden tools

The 1950's saw a revolution in small appliances for use in the average household. This hand held wrench was provided exclusively for the Coleman self heating kerosene (KVHS 0347A) iron and used for the regular changing the kerosene used in it. The iron was used before and during the electricity supplies available from the Kiewa Hydro Electricity Scheme. These irons remained in use within regional rural areas that had limited or unreliable electrical reticulation. Kerosene supplies were cheaper than electricity but also more inconvenient than electric. Electrical appliances become cheaper to buy and maintain in the later part of the 1900's and the now older kerosene iron was faded out.This wrench was required to open the fuel container which stored kerosene in the Coleman hand iron(see KVHS 0347A). This item was part of the maintenance requirement of this particular hand iron. In the 1950s and later the Kiewa Valley was still a relatively isolated region which was home to rural properties and small settlements. The availability of electricity and or the financial means to afford new types of electric hand irons ensured that older and sometimes less efficient ironing remained for an extended period covering the 1960s to 1970s. Kerosene products, such as this kerosene iron was a cheaper method for farm based domestic and other rural activities requiring a heat source. The use of kerosene as a heat/light source was able to be supplied in bulk and able to be used when floods severed vital roads into this region. The supply of electricity was in summer time subject to interruption from bush fire damaged wooden poles carrying the electrical cables. Self sufficiency by rural populations was the backbone of survival(use of this wrench was a part of rural life). The ability to store energy sources "on the farm" was a prerequisite of isolated regions, such as the Kiewa Valley, circa 1950s.This item is a flat cast iron wrench, which has been specifically made for KVHS 0347A (kerosene iron). The wrench has four specific forms cut into the steel which fit firmly around their targeted nut and other fixtures. Also see See KVHS 0347B- Instruction sheet; and KVHS 0347D Fuel can.ironing, iron maintenance tool, domestic appliances, household

Jonathan Harris operated a winery on the banks of the Axe Creek, Axedale in the 1850s. Metal hook combination is made from one and a half centimetre diameter metal in two pieces, with four centimetre circles on each end 40 centimetres long. They are joined at the top by a threaded section with a square nut, a thin metal washer and a one centimetre thick four centimetre wide square metal piece. Part of the Harris Collectionagriculture, farm, hanging hooks

Pittock collection: nine assorted metal spanners * seven double ended steel spanners, 155-250 mm L * one single ended 24 mm nut, 140 mm L * one odd tool, 140 mm L * some manufacturer's numbering Items stored in Pittock coach builder's box, reference 13000.1.

Used to lay out Machine work, or to set up pieces on a planer, radial drill, milling machine or boring machine. To set the Scriber the spindle swivels down or up into any position where it is clamped by the knurled nut. There is a fine screw adjustment for the Scriber point (note: this is not original Scriber supplied with this instrument). The base on this Surface Gauge can be set on cylindrical work, using the ‘V’ groove in the base, or by pushing down the two gauge pins. It can be brought square with an edge or T slot. Metal gauge toolgauge, tool, trade, brown and sharp manufacturing company

This item would have been made as a stand to display shoes in a shop. It may have been made locally in Warrnambool. As this item was donated to the Warrnambool and District Historical Society by a member of the Dickson family some years ago, it is highly likely that the stand was used for display purposes in the Warrnambool department store of Cramond and Dickson. This store, selling mainly men’s and ladies’ wear, was established by John Cramond and James Dickson in Warrnambool in 1853 in Timor Street and it later moved to Liebig Street, closing in 1973. This stand is of interest as an example of the type of stand used for display in shops early to mid 20th century. It is also significant as a possible memento of the Cramond and Dickson shop which was so important in Warrnambool’s history.This is a shoe stand with a wooden stick or pole tapering slightly to the top and ridged in three places. The pole is mounted on a wooden pedestal which is rectangular-shaped and which is indented to form a smaller rectangular base. A small wooden piece in the shape of a flat bottom of a shoe is attached to the pole with a metal bolt and nut. This enables the shoe piece to remain flat or to be tilted at various angles. cramond and dickson store, warrnambool, history of warrnambool, shoe display

Bell used by the conductor or passengers to signal to the driver - stop, proceed or an emergency stop. Demonstrates a conductors communication or signal bell made for use on tramcars. Brass Conductor Communication Bell, or signal bell, consisting of cast frame, bell, striker, bell pull part, one nut and washer to secure the bell to the frame and two rivets securing for the bell pull part. Has at both ends, six screw holes that were used to secure the bell to the roof and at one end the initials "TB" cast in - "Tramway Board".trams, tramways, conductors, bells, tramway board

Bell used by the conductor or passengers to signal to the driver - stop, proceed or an emergency stop. TB PatternDemonstrates a conductors communication or signal bell made for use on tramcars.Brass Conductor Communication Bell, or signal bell, consisting of cast frame, bell, striker, bell pull part, one nut to secure the bell to the frame and two rivets securing for the bell pull part. Has at both ends, multiple screw holes that were used to secure the bell to the roof. Has at one end the initials "TB" cast in - "Tramway Board". trams, tramways, conductors, bells, mmtb

Recovered by the donor from Geelong tram No. 2 and polished for donation to the Museum. One of four bells that would have been fitted to the tram.Demonstrates a conductors communication bell made for use on tramcars. Brass Conductor Communication Bell, consisting of cast frame, bell, striker, bell pull part, one nut to secure the bell to the frame and two rivets securing for the bell pull part. Has the initials "TB" cast in both ends that were used to secure the bell to the roof - possibly indicating the "Tramway Board" manufacture. Has the number "2" on the underside of the bell in green paint.conductor, bell, trams, tramways, geelong, tram 2

Note by T.H. Kneen 18 December 1991, "Students in photos are of the 1944 graduating year."Black and white photograph. Students seated on an upturned ladder watching an instructor pruning tree in the Orchard. Garden Staff member standing behind.On reverse," Burnley Horticultural College 1936 L to R Tom Trahair-Garden Labourer, Dennis Greiger-Student. Students: Bob Grant, Ian Ball, Grace Douglas (Mrs Tom Walker), Beth Nutting (Mrs Coutts), Gwen Watson (Mrs McCarthy). Lecturer Perc Trevaskis-F.A.I.P.R."burnley horticultural college, 1936, tom trahair, garden labourer, dennis greiger, students, bob grant, ian ball, grace douglas, mrs tom walker, beth nutting (mrs coutts), gwen watson (mrs mccarthy), lecturer, perc trevaskis, f.a.i.p.r., 1944, student outside class, pruning demonstration

Trolley ear hanger assembly that would screw into an trolley ear - internal insulation or cap and cone type - hanger - comprising 1 - cast steel hanger shaped in a cone with a mechanism to clip to the overhead span wires thread on the top. 2 - cast steel cap internally threaded 3 - Insulated shaft with a mica type appearance where damaged and a steel bolt with a steel nut at the lower end.overhead, trolley wire, fittings