Showing 833 items
matching riggers
-
Williamstown Historical Society Inc
Wool painting, Coogee, circa 1889
Wool painting a hobby for men - Long stitch embroidery/tapestry. Fred J Webber produced this painting when he was fourteen years old.Wool painting of bay steamer "Coogee" passing from right to left with full rigged ship in distance off her starboard bow. Frame has ornate border. Ship has black hull and funnel - structure faded red coogee wool painting ship -
National Wool Museum
Book, Haddon Rig: the first hundred years
"Haddon Rig: the first hundred years" - Suzanne Falkiner, 1981. A history of the Falkiner-run Haddon Rig sheep stud in NSW.sheep breeding - history merino sheep - history, haddon rig merino sheep stud, sheep breeding - history, merino sheep - history -
Flagstaff Hill Maritime Museum and Village
Craft - Ship Model, Victoria
Ship model, Victoria with full ship rig. 3 masted, with 2 deck houses, 2 boats on top of forward house. Yellow hull decoration. Mounted in case with painted backdrop and ocean. Timber case painted black, glass face and brass trim. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ship model -
Royal Melbourne Yacht Squadron
Charles Marshall Memorial Trophy
Originally presented to the St Kilda 14ft Sailing Club in memory of Hon Life Member, Past Commodore Charles Marshall of the Royal St Kilda Yacht Club and long time President and Honorary Life Member of the 14ft Sailing Club. It was first won season 1954-1955 by Noel Brooke skippering the 14-footer dinghy Charles Marshall. On the disbanding of the Dinghy Club in 1966, the trophy was re-donated to the RMYS for competition in the Off-the–beach Heron Class, First won by A. Neale with Gypsy. On the decline of the Heron class it was then re-allocated 1970-71 for the Gwen 12 Class to be first won by Geoffery and Phillip Hughes with Concorde II. Season 1975-76 it was allocated for a combined division event over three heats to be won by Hugh Kesterton with Cygnet. Later it was allocated for 1st, 2nd and 3rd divisions aggregate over the Watts, Bennell and Dick Lean races based on the VYC handicap system. Again amended to be awarded for best result gained in the Bert Watts, Doc Bennell and Dick Lean events as a series.Silver fully rigged racing sloop, mounted on shaped rectangular wooden base, 250 x 140mm, with silver shaped description plaques centred both sides. The whole is enclosed in a Glass case with silver winners inscription plaques attached around base of case.CHARLES MARSHALL MEMORIAL TROPHY PRESENTED TO ST KILDA 14FT SAILING CLUB BY MR & MRS HUGH. S. HAWES. 1955 CHARLES MARSHALL MEMORIAL TROPHY PRESENTED TO ROYAL MELBOURNE YACHT SQ FOR THE HERON CLASS BY MR & MRS H. S. HAWES. 1966trophy, charles marshall, memorial trophy -
Flagstaff Hill Maritime Museum and Village
Lithograph, The Schomberg
When the ship Schomberg was launched in 1855, she was considered the most perfect clipper ship ever to be built. James Blaine’s Black Ball Line had commissioned her to be built for their fleet of passenger liners. At a cost of £43,103, the Aberdeen builders designed her to sail faster than the quick clippers designed by North American Donald McKay. She was a three masted wooden clipper ship, built with diagonal planking of British oak with layers of Scottish larch. This luxury vessel was designed to transport emigrants to Melbourne in superior comfort. She had ventilation ducts to provide air to the lower decks and a dining saloon, smoking room, library and bathrooms for the first class passengers. At the launch of Schomberg’s maiden voyage, her master Captain ‘Bully’ Forbes, drunkenly predicted that he would make the journey between Liverpool and Melbourne in 60 days. Schomberg departed Liverpool on 6 October 1855 with 430 passengers and 3000 tons cargo including iron rails and equipment intended the build the Geelong Railway and a bridge over the Yarra from Melbourne to Hawthorn. The winds were poor as Schomberg sailed across the equator, slowing her journey considerably. She was 78 days out of Liverpool when she ran aground on a sand-spit near Peterborough, Victoria, on 27 December; the sand spit and the currents were not marked on Forbes’s map. Overnight, the crew launched a lifeboat to find a safe place to land the ship’s passengers. The scouting party returned to Schomberg and advised Forbes that it was best to wait until morning because the rough seas could easily overturn the small lifeboats. The ship’s Chief Officer spotted SS Queen at dawn and signalled the steamer. The master of the SS Queen approached the stranded vessel and all of Schomberg’s passengers were able to disembark safely. The Black Ball Line’s Melbourne agent sent a steamer to retrieve the passengers’ baggage from the Schomberg. Other steamers helped unload her cargo until the weather changed and prevented the salvage teams from accessing the ship. Local merchants Manifold & Bostock bought the wreck and cargo, but did not attempt to salvage the cargo still on board the ship. They eventually sold it on to a Melbourne businessman and two seafarers. After two of the men drowned when they tried to reach Schomberg, salvage efforts were abandoned.32 In 1975, divers from Flagstaff Hill, including Peter Ronald, found an ornate communion set at the wreck. The set comprised a jug, two chalices, a plate and a lid. The lid did not fit any of the other objects and in 1978 a piece of the lid broke off, revealing a glint of gold. As museum staff carefully examined the lid and removed marine growth, they found a diamond ring, which is currently on display in the Great Circle Gallery.33 Flagstaff Hill also holds ship fittings and equipment, personal effects, a lithograph, tickets and photograph from the Schomberg. Most of the artefacts were salvaged from the wreck by Peter Ronald, former director of Flagstaff Hill. The Schomberg, which is on the Victorian Heritage Register (VHR S612), has great historical significance as a rare example of a large, fast clipper ship on the England to Australia run, carrying emigrants at the time of the Victorian gold rush. She represents the technical advances made to break sailing records between Europe and Australia. Flagstaff Hill’s collection of artefacts from the Schomberg is significant for its association with the shipwreck, The collection is primarily significant because of the relationship between the objects, as together they have a high potential to interpret the story of the Schomberg. It is archaeologically significant as the remains of an international passenger Ship. It is historically significant for representing aspects of Victoria’s shipping history and for its association with the shipwreck and the ship, which was designed to be fastest and most luxurious of its day Lithograph of the Schomberg. The vessel is partially rigged with a buoy in the foreground. Behind the vessel are a number of small boats. The writing on the lithograph states "The Schomberg, GALOP Dedicated to Mrs Charles Schomberg (of Liverpool) by Chas D'Albert" Two names BRANDARD and M & N HANHART.IMP on bottom of lithograph.warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, schomberg, shipwrecked-artefact, clipper ship, black ball line, 1855 shipwreck, aberdeen clipper ship, captain forbes, peterborough shipwreck, ss queen, brandard, lithograph, m & n hanhart.imp -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, Carpenter M and V, 1/06/1989 12:00:00 AM
Colour photograph of wharf at Bullock Island showing oil rig supply vessel Lakes Tide and dredge Sandpiper at moorings Fishermans Coop building in background Thunderbird at New Works jetty in distance. Taken from dredge April Hamer Lakes Entrance Victoriaboats and boating, jetties -
Ringwood and District Historical Society
Photographs, 1979-80 MMBW pipe line project at Hubbard Reserve, North Ringwood � View towards Debbie Place
Part of a 43-photo record of the MMBW�s engineering feat in drilling a 12 inch pipe line up to 40 feet deep through rock hardened by volcanic action associated with geological fault that occurs along the line. The work took place from October 1979 to May 1980 on the southern boundary of Hubbard Reserve, North Ringwood. The collection was presented to the Ringwood Historical Research Group by J Clarke on 9th June 1980.E561 N15 3 March 1980 A43 View towards Debbie Place, showing 2 swivel cranes at shafts, timber of manhole in creek, the tracked drill rig and its compressor caravan. -
Flagstaff Hill Maritime Museum and Village
Craft - Ship Model, pre 1963
The funnel colours on the model indicate the ship it represents was one of the early ships of the Allan shipping Line designated as a Royal Mail Carrier. Funnel colours are used to identify a ship's owners while at sea from a distance by other vessels. The Allan Shipping Line was started in 1819, by Captain Alexander Allan of Saltcoats, Ayrshire, trading and transporting between Scotland and Montreal Canada, a route which quickly became synonymous with the Allan Line. By the 1830s the company had offices in Glasgow, Liverpool and Montreal, with all of Captain Allan's five sons actively involved with the business. But his second son, Sir Hugh Allan, spearheaded the second generation. In 1854, Hugh launched the Montreal Ocean Steamship Company as part of the Allan Line, and two years later ousted Samuel Cunard to take control of the Royal Mail contract between Britain and North America. By the 1880s, the Allan Line was the world's largest privately owned shipping concern. In 1891, the company took over the State Line, founded in 1872, and was often referred to as the Allan & State Line. In 1897, Andrew Allan amalgamated the various branches of the Allan shipping empire under one company, Allan Line Steamship Company Ltd., of Glasgow. The company by then had added offices in Boston and London. In 1917, under Sir Montagu Allan, who represented the third generation of the Allan family, the company was purchased by Canadian Pacific Steamships, and by the following year, the Allan name had disappeared from commercial shipping. The Allan Line fleet had evolved for decades, changing as new ships were added, lost at sea, sold, or scrapped. The model in Flagstaff Hill's collection could be the SS Canadian or Indian; both were early Allan steam packets that had helped the Allan company secure the Royal Mail Atlantic contract in 1856.The model is of a Royal Mail steamship, with the probability the original ship was owned by the Allan Shipping Line in the mid-19th century and primarily used for the Atlantic mail run between England and Canada. Given the funnel colours and ship design, the model could be the SS Canadian or the Indian; both were the first ships for the company. The Allen line became the most successful shipping company of the time used for emigration and the transporting of mail.Ship model; steamship and sail vessel in use around the 1860s. Handcrafted model steamship with twin funnels painted black, white and red and three masts with square-rigged sails. The ship model is mounted on a gold-painted board. The ship was donated with a fitted wooden case.warrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, ship model, steam and sail vessel, handcrafted ship model, steam vessel, model making, handmade, red with narrow white band below black top., red shite and black funnel, allan shipping line, steam and sail ship, two funnels, wooden sailing shipo, three-masted ship -
Queenscliffe Maritime Museum
Photograph - Photographs of a fishing boat, Photograph of Couta fishing boat JOYCE, unknown
gaff-rigged fishing boatblack and white photograph of the fishing boat JOYCERefer Notes section for detailsfishing boat -
Queenscliffe Maritime Museum
Photograph - Photographs of a family picnic, old piers & breakwaters at Queenscliffe scenery, Photograph of family picnic & scenery, unknown
gaff-rigged fishing boatblack and white photograph of old piers, breakwaters and a family picnicRefer Notes section for detailsfishing boat -
Ringwood and District Historical Society
Photographs, 1979-80 MMBW pipe line project at Hubbard Reserve, North Ringwood � Air drill rig
Part of a 43-photo record of the MMBW�s engineering feat in drilling a 12 inch pipe line up to 40 feet deep through rock hardened by volcanic action associated with geological fault that occurs along the line. The work took place from October 1979 to May 1980 on the southern boundary of Hubbard Reserve, North Ringwood. The collection was presented to the Ringwood Historical Research Group by J Clarke on 9th June 1980.E561 N18 3 March 1980 A43 Air drill rig at the start of the open cut to Debbie Place. It made 24 holes at a time as each were charged with 10 sticks of gelignite for ripple firing. -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph
Colour photograph taken at Western Wharf of three fishing boats and a catamaran L to R Georgianna Jimmy Peters scallops then became Rebecca sold to present owners, Perelandra Synergy, Christine Clair Graeme Cottee, Bass Trek Rig tendor Dean Jacobi Lakes Entrance Victoriafishing industry -
South Gippsland Shire Council
Boat, Miniature
Handcarved miniature wooden Chinese junk. Made from dark polished wood the sailing boat features a carved dragon head and tail and three masts with sails rigged with gold thread. A small chinese hut is on the forward deck. A red ribbon bow is tied to the top of each mast. -
Queenscliffe Maritime Museum
Painting - Oil Painting, Dacre Smyth, 1. 'Queenscliffe' in open shed. 2. 1988 Tall Ships at Queenscliff; Leeuwin, Asgard
Tall Ships at Queenscliff; 'The sail training barquentine "Leeuwin" from West Australia and the Republic of Ireland brigantine "Asgard II" at anchor off Queenscliff prior to the "Arrival Convoy" in Melbourne of a number of the Tall Ships, all bound eventually for Sydney via Hobart for Australia's 1988 bicentenary. The Queenscliff pier with the old lifeboat shed and the Blacklight (Queenscliffe's High Light) alongside the old signal tower are also depicted. Port Phillip Heads in the disctance. By Dacre Smyth 29 Dec 1987.A barquentine or schooner barque is a sailing vessel with three or more masts; with a square rigged foremast and fore-and-aft rigged main, mizzen and any other masts. A brigantine is a two-masted sailing vessel with a fully square-rigged foremast and at least two sails on the main mast: a square topsail and a gaff sail mainsail (behind the mast). The main mast is the second and taller of the two masts.Oil painting in frame of the Leeuwin and Asgard tall ships in Queenscliff 1988.On front: Tall Ships at Queenscliff (LEEUWIN and ASGARD). Hand written on back: Tall Ships at Queenscliff; 'The sail training barquentine "Leeuwin" from West Australia and the Republic of Ireland brigantine "Asgard II" at anchor off Queenscliff prior to the "Arrival Convoy" in Melbourne of a number of the Tall Ships, all bound eventually for Sydney via Hobart for Australia's 1988 bicentenary. The Queenscliff pier with the old lifeboat shed and the Blacklight (Queenscliffe's High Light) alongside the old signal tower are also depicted. Port Phillip Heads in the disctance. By Dacre Smyth 29 Dec 1987'.leeuwin, barquentine, queenscliff, dacre smyth, brigantine -
Queenscliffe Maritime Museum
Print - Print of Benvenue
Passenger & emigrant square rigged sailing shipRealismColoured print of a drawing of the SS BENVENUE.Reverse: " nil "square rigged sailing ship drawing, ss benvenue, passenger ship, emigrant ship -
Queenscliffe Maritime Museum
Print - Print of SS BLUE JACKET
Passenger & emigrant square rigged sailing shipRealismOriginal print off the woodblock etching of the clipper ship SS Blue Jacket.Reverse: " see 1986-045.2 for a copy"passenger ship, emigrant ship, clipper ship ss blue jacket -
Queenscliffe Maritime Museum
Print - Print of SS CAROLINE, Photographer unknown, 1979
Passenger & emigrant square rigged sailing shipRealismPrint of a sepia print off a photograph of the SS CAROLINE.Reverse: " built 1821 03 1833 "passenger ship, emigrant ship -
Queenscliffe Maritime Museum
Print - Print of SS GRACE HARWAR, Photographer unknown
Passenger & emigrant square rigged sailing shipRealismSepia print of a photograph of the SS GRACE HARWAR.Reverse: " The second vessel to load wheat at the port of Geelong / wheat carried for [to] Europe until c1930 (?) "freight ship -
Flagstaff Hill Maritime Museum and Village
Photograph, 1889
Built 1889 of steel in Port Glasgow by W. Hamilton & Co. She was rigged as a full-rigged ship carrying royals over double topgallant sails on the fore- and main masts, and a royal over a single topgallant sail on the mizzen.Photograph of "Grace Harwar" running the easting down Cape to Australia. (Photo shows a steel hulled sailing ship at dock.)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, photograph of grace hanwar, grace hanwar vessel -
Clunes Museum
Photograph - PHOTOGRAPH TANK
GALVANISED IRON TANK RIG ORR OAT BIN MIRAPHOTOGRAPH OF GALVANISED IRON OAT BIN WITH ONE MAN SITTING ON RIM OF TANK ANOTHER MAN STANDING ON WOODEN LADDER AGAINST THE TANK.photographs, weickhardt, tank, oat bin -
Mission to Seafarers Victoria
Tool - Rigger's knife and sheath, 20th C
The rigger's knife is usually more square pointed and thicker than that of a sailmaker. ( C.W. Ashley 1944 Ashley book of Knots p. 19) The rigger usually had a kit of tools that would fit on a belt: a sheath knife, a marlingspike, and a grease horn containing tallow.Property of the anonymous donor a former seafarer who also presented us with two hand-crafted examples of knot tying.Knife; a wooden handle in two pieces either side of blade secured by two steel anchor points. The short steel blade is oxidised but the actual cutting edge is worn and honed. The yellow nylon sheath appears to be made from recycled material strongly stitched on two sides. Large font black lettering on the inside but indistinguishable.rigging, rigger, sailor, seamen -
Federation University Historical Collection
Book - Scientific Instument, Valve Characteristic Meter, c1960
The test rig is contained in a metal frame with sloping front panel that contains the indicator and number seting knobs. A pespex lift-up lid coves numerous valve sockets and a set of coding wheels. Both sides and back covered with pespex. Metal surfaces panted hammerton grey. abbreviated working instructions and AVO Valve data manual.Serial Number 1961scientific instrument, ballarat school of mines, valve characteristic meter -
Moorabbin Air Museum
Equipment (Item) - Australian Army Chest Rig Webbing And Pouches
One pouch is inscribed with Jackson FIT614 -
National Wool Museum
Letter
Letter from the Haddon Rig Stud to W R Lang regarding the testing of two fleeces.wool - research wool - testing merino sheep - history world war ii, gordon institute of technology, lang, dr w. roy, haddon rig merino sheep stud, wool - research, wool - testing, merino sheep - history, world war ii -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, 1/11/1930 12:00:00 AM
Also a second photograph of a visitor at rig taken in 1930 04906.1 11 x 7 cmBlack and white photograph of burning off gas at mid-west oil well at night crowd watching identified are Mr K Lyne Geologist in charge in white shirt, Mr H Dod SA Oil supervisor in white helmet Charles Downward, Dave Bilsoin, Don Campbell, Jim Kennedy, Don Ricardo, Bill Hopgood, Gladys Beyer Lakes Entrance Victoriaoil and gas industry -
Flagstaff Hill Maritime Museum and Village
Craft - Ship Model, Cutty Sark
ABOUT THE CUTTY SARK The CUTTY SARK, built in Britain in 1869, was one of the last historic sailing ships. She traded in tea from China for a few years then began trading with Australia in the wool industry. She held the record sailing speed from Australia to Britain for ten years! Later a Portuguese company bought her as a cargo ship (and renamed her as FERREIRA) then she was purchased by a returned sea captain for use as a training ship in Cornwall. After the captain’s death she was transferred to a training college in Greenwich in 1938. In 1954 she was placed permanently in dry dock at Greenwich for display.The sailing ship CUTTY SARK carried export cargos of wool from the Australian wool industry.Ship model Cutty Sark, a Clipper in full ship rig with raised poop deck, deck house, 3 boats on deck (1 has fallen). Two toned black and tan hull, 3 jibs set in diorama of blue sea, light house and another small yacht. Is housed in glass sided case with dark grey painted structure. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, cutty sark, historic sailing ship, tea clipper, sail training vessel, cadet training ship, commercial trading vessel, cargo sail vessel, ship model cutty sark, australian wool export -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, 1995
Jack Whelan built replica rig, Lake Tyers Beach Progress Association, and worked on beautification of the area.Black and white photograph of group of people on bus tour, looking at the Bunga Oil Bore, old Lake Tyers Road, near Lakes Entrance ,Victoria.oil and gas industry -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, 1/09/1930 12:00:00 AM
Also an enlargement 04908.1 25 x 14 cm. Keith Scarce was a rig hand on this site for short timeSepia toned photograph of oil derrick SA Oil Co No 8 Well situated off Myers Street at rear of present Secondary College Lakes Entrance Victoriaoil and gas industry -
Port of Echuca
Black and white photograph, Approx.1980
Details of P. S. Queen: construction: composite 16 h.p. Registered tonnage: gross 128, net 92. Dimensions:L.103.3 ft B.18.5ft. D 5.7ft. Port and date of registry:Adelaide, 1880, no.43, 154. Built at Goolwa, S.A., 1865!. Owner: Chas Oliver. Lengthened in 1872. Details of barge Bourke. Construction:wood. Tonnage: 124. Dimensions:L 108.5 ft X B 20.5 ft X D 8.0 ft. Port and date of registry:Adelaide, 1898, no. 74, 771. built at: Miland, S. A. 1876. Owner: A. L. Land seer. Information from "The register of Australian & N. Z. Shipping 1898. This photograph has historical and social significance being typical of transport on the rivers systems of Australia in the late 1800s. Paddlesteamers carried supples to settlers and then carried their produce such as Wool and other produce down the rivers to markets or to be transferred by rail to the major ports such as Melbourne or Adelaide. Black and white photograph of P. S. Queen with the barge Bourke rigged to its side. Photographed in a gorge where boats appear to be moored. Photograph taken from the bow of the Queen with 3 people visible on the port side of the boat and there appear to be sacks stacked on the front of the boat. The barge Bourke has a tent structured tarp over it. Copy of an original photograph (date unknown)Inscription in pencil on reverse:Queen. On the photograph can be seen "Queen" on the bow and partically on the wheelhouse. The barge has "Bourke" visible on its bow.p. s. queen, bourke barge, paddle steamers -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, Lakes Post Newspaper, 1/12/1994 12:00:00 AM
,Black and white photograph showing Esso's SE Training Officer Sam Peluso with Kurnai Tide crew Lance Dostine, Bob Sanger, Geoffrey deWarsop, Michael Catania, Karen Loughborough, Chris Finley Superviser after safety award for three years injury free. Esso Oil rig supply boat Kurnai Tide based at Lakes Entrance Victoriaaboriginals, boats and boating, oil and gas industry