Showing 931 items
matching slow
-
Nillumbik Shire Council
Pottery (vase): Joan Armfield, Joan Armfield, Vessel - Iron Clay, c.1975
Vessel - Iron Clay, is a wheel thrown vase that curves upwards from a narrow base to form a wide, rounded shoulder before concluding at a short, delicate rim. In contrast to the unglazed, rough texture of the exterior surface, the entrance to the vessel is smooth and shiny due to a tea leaf dust glaze. This is a low alumina tenmoku glaze, containing magnesium oxide which is responsible for the dark yellow/green striations of speckling which are formed during the slow cooling process of a reduction firing. This patterning is intermittent and dispersed with a grey/green pebbled effect. The stoneware vessel is built from clay with a high percentage of iron. -
Federation University Art Collection
Ceramic, 'Helmet Bowl & Vessel' by Neville French, 2003
Neville FRENCH (1955- ) Born Maryborough, Victoria In 1977 Neville French graduated from Ballarat College of Advanced Education after studying a Diploma in Fine Art (Ceramics) between 1974 and 1976, and was a tutor there for six months in 1978. He holds a Master of Arts, Research (Ceramics) from RMIT Universiy, and was awarded the Vitrify Alcorso National Ceramics Award in 2012. Neville has an international reputation as a ceramics artists and educator. From 1982 to 2012 Neville French was teach and coordinator of the Ceramics department at the Ballarat School of Mines and University of Ballarat (now Federation University). From 1982 to 2012 Neville French taught Ceramics at the Ballarat School of Mines TAFE, which later merged with the University of Ballarat (now Federation University Australia). He completed a Graduate Diploma of Education at Hawthorn State College in 1980, a Certificate of Stoneware Glazes from Brisbane College of Advanced Education in 1983 and a Master of Arts Fine Art (Ceramics) at RMIT University in 2000. Between 2010 and 2012 Neville French taught post graduate honours and masters Ceramics students. During his time as a student at Ballarat Neville Bunning would collect clay from the Enfield clay pit. He described following white tyre tracks to find the location. He described the clay as silky smooth and and fired to a beautiful grey colour at stoneware tempreture. When blended with terracotta clay from Nerrina or fireclay from Bacchus Marsh a wide range of different bodies could be created. This item is part of the Federation University Art Collection. The Art Collection features over 2000 works and was listed as a 'Ballarat Treasure' in 2007.Two vessels made as a sculptural pair. Statement: "My work involves an exploration of elemental vessels - extending porcelain to develop taut contours and spatial dynamics. I seek to distill an essence of purity to evoke notions of quietude and transendence through the expressive use of glaze and its relationship to form, tactility, weight and light. Forms are wheel-thrown, altered and slowly scraped to develip a soft line and solidity. Coloured matt glazes are layered and fused to the porcelain body through multiple firings to give expression and luminosity to the surface,. The iodosyncratice nature of glaze stimulates the imagination. It evokes associations with the natural environement and alludes to a meditative infinity."Signed on base 'f.'art, artwork, neville french, french, ceramics, porcelain, wheelthrown, thrown and altered, alumni -
Waverley RSL Sub Branch
First Aid pack with 1 pair Puttees
These waterproof canvas covered dressing kits were carried by all service personnel on active service. They were used as first aid for field injuries, especially when Medics were unable to immediately treat or evacuate injured from battle areas. They saved many lives through wound compression slowing bleedin Field first aid, dressing pack, dressing kit, field dressingWound dressing / first aid pack 2 cloth brown Puttees -
Diamond Valley Vietnam Veterans Sub-Branch
Equipment - Webbing, 22/2/2009
The back pack and webbing was the infantry soldiers 'house on feet'; whilst on patrol, he carried all that was required for days/weeks at a time with some re-supplies during the course of time sometimes; it was common practice to slide into the backpack whilst prone on the ground and then slowly turn and rise to standing as the most convenient of loading up.Despite the effort required to patrol long distances with a heavy load, many soldiers had a close affinity with the backpack and webbing as it provided him with comefort and necessities during an Operation.Standard issue of infantry back pack and webbing kit for carrying of day-to-day needs whist on patrol or other duties. Contents included, but not limited to (and In no particular order): food, clothing, cooking utensils, water, spare ammunition, arms, maintenance tools, hootchie/mosquito net, personal items, machete; six pieces in total.Pic 01: Backpack Front Pic 02: Backpack Rear Pic 03: Belt with full compliments: ammunition pouch x 2, water bottle x 2, bumpack x 1 Pic 04: Bumpack in isolationvietnam, vietnam war, diamond valley vietnam veterans sub branch, equipment -
Eltham District Historical Society Inc
Document - Property Binder, Intersection of Main Road and Fitzsimons Lane, Eltham
Newspaper article: Go-slow on fix for road problems, Diamond Valley Leader, 21 September 2005, covering delay re traffic problems Ironbark Road ,Yan Yean Road, Fitzsimons Lane, Main Road roundabout. Fitzsimons Lane Upgrade, Community Update, June 2022, Major Road Projects Victoria, includes detail on landscaping at Main Road intersection.main road, eltham, property, fitzsimons lane, traffic, edendale community farm, eltham high school, landscape, major road projects victoria, porter street, roundabout, yellow box gum -
Yendon History Group
Photograph, Untitled, Yendon Catholic Church, Early 20th century
Importance of religion in the Yendon community is evidenced by the two churches. This is the weatherboard building of the catholic church and there was also a brick Anglican Church. Both these buildings were eventually removed when congregations declined as the community declined in the twentieth century.The catholic church was looking a bit delapidated in this photo taken just before it was demolished. Locals recall how the priest had to contend with all the birds nesting in the roof as the church slowly deteriorated.This is the only known photo ( as of 2010) of the Catholic Church in Yendon before it was removed.Enlarged printed copy of scanned Sepia photo of the Catholic Church, a wooden structure with a pitched tin roof, at Yendon just before it was removed.The grass is high and the barbed wire is not strained. The arched church windows have several broken panes of glass.It is a rectangular building with two additional spaces - an entry and a vestry. religion, tin roof, church, yendon, catholic, arched windows, vestry, broken panes of glass, weatherboard churches, pitched roofs, barbed wire -
Melbourne Legacy
Photograph, Widows function at Legacy House, 1989
Photograph of Legacy widows gathered around a table upon which one widow is dancing barefoot. It is probably a widows club meeting. Widows would meet regularly and it was an important social outlet for them. The newspaper article appeared in The Age on 3 March 1989. The caption explains that at a Legacy Widows' singalong Mrs Peg Garrett (69) showed she hadn't slowed down and 'led the singalong with an exuberance that was the envy of the the other guests.'A record that Legacy provided social gatherings for the benefit of Legacy widows.Black and white photo of a lady on a table and a photocopy of a newspaper article.Newspaper article is titled 'Move over, Minnelli, another star is born.'widows, activities -
Eltham District Historical Society Inc
Work on paper (item) - Photograph, 2 Metery Road, Eltham South
Robert and Ada Zull built an Alistair Knox designed house at 2 (lot 8) Metery Road, Eltham, a one acre property for their family of five in the mid 1960s. This series of photographs shows the one story house with its roof in place. Susan Bennett, nee Zull's reminiscences are published in EDHS Newsletter, February and April 2020. "..The block was big.. Building the house was slow going...the house had a concrete floor and a roof, but no windows..."This series of photographs together with the account of personal remiscences provide a unique document of the construction of an Alistair Knox designed home. Knox was a pioneer in the use of mudbricks and recycled materials and is significant to his contribution of this style of architecture in Eltham and the wider Shire of Nillumbik.zull family, eltham south, 2 metery road, alistair knox, bush block, construction, vw beetle -
Forests Commission Retired Personnel Association (FCRPA)
Wooden tree measuring calipers (inches)
Foresters usually measure the diameter of trees at Breast Height – traditionally 4 foot, 6 inches – now 1.3 m – which is termed Diameter Breast Height Over Bark (DBHOB). The most common way to measure tree diameter is to place a calibrated tape around the stem at breast height. It’s simple, but can be slow, particularly if the scrub is thick, or if there are heaps of trees. A tree caliper is another quick method of estimating DBHOB. Wooden tree measuring calipersMeasurements are in inches (pre metrication in 1974) A crown faint crown mark (331) and crows foot is visible on one end forest measurement -
Eltham District Historical Society Inc
Work on paper (item) - Photograph, 2 Metery Road, Eltham South
Robert and Ada Zull built an Alistair Knox designed house at 2 (lot 8) Metery Road, Eltham, a one acre property for their family of five in the mid 1960s. This series of photographs shows the one story house towards the end of its construction. Susan Bennett, nee Zull's reminiscences are published in EDHS Newsletter, February and April 2020. "..The block was big.. Building the house was slow going...the house had a concrete floor and a roof, but no windows..."This series of photographs together with the account of personal remiscences provide a unique document of the construction of an Alistair Knox designed home. Knox was a pioneer in the use of mudbricks and recycled materials and is significant to his contribution of this style of architecture in Eltham and the wider Shire of Nillumbik.zull family, eltham south, 2 metery road, alistair knox, bush block, construction, vw beetle -
Eltham District Historical Society Inc
Work on paper (item) - Photograph, 2 Metery Road, Eltham South
Robert and Ada Zull built an Alistair Knox designed house at 2 (lot 8) Metery Road, Eltham, a one acre property for their family of five in the mid 1960s. This series of photographs shows the one story house towards the end of its construction. Susan Bennett, nee Zull's reminiscences are published in EDHS Newsletter, February and April 2020. "..The block was big.. Building the house was slow going...the house had a concrete floor and a roof, but no windows..."This series of photographs together with the account of personal remiscences provide a unique document of the construction of an Alistair Knox designed home. Knox was a pioneer in the use of mudbricks and recycled materials and is significant to his contribution of this style of architecture in Eltham and the wider Shire of Nillumbik.zull family, eltham south, 2 metery road, alistair knox, bush block, construction, vw beetle -
Port Melbourne Historical & Preservation Society
Photograph - Cricket team, J Kitchen & Sons
The man sitting extreme left in the front row is Fred Nicholson's father George Nicholson, Charlie Slowly is oh his right (Charlie later worked at Faram Bros Hardware). The leftmost man in cricket whites in the second row is Fred's uncle, Arthur Nicholson. Another uncle, William 'Bill' Condon is to his right. The man fourth from the left in the back row is Tommy Breen. He was the supervisor of the Velvet Soap room and lived in Dorcas Street.c1920/30s black and white photograph (original) of the cricket team of J Kitchen & Sonsindustry - manufacturing, sport - cricket, celebrations fetes and exhibitions, j kitchen & sons pty ltd, george nicholson, charlie slowly, arthur nicholson, william condron, tommy breen -
Geoffrey Kaye Museum of Anaesthetic History
Tube, Endotracheal, Kuhn, Circa 1900
The evolution of endotracheal intubation for anaesthesia was a slow process. Franz Kuhn (1806-1929), a head and neck surgeon working in Kassel, Germany, between 1902 and 1911, is said to have done more than any other to obtain general recognition for endotracheal anaesthesia. Kuhn's tube, is a flexible metal one inserted on a stilette which was then withdrawn. The tube was then secured with an elastic neck strap and connected by a rubber tube to a Trendelenburg cone. The glottis was packed with oiled gauze. Metal spiral tube with elaborate handle at one end and rounded at the other. There is a metal clasp at the base of the handle which all forms part of the endotracheal tube. Inside the tube is a curved metal piece that functions as an introducer.kuhn, endotracheal, airway, intubation -
Melbourne Legacy
Document - Document, minutes, Biography of Sir Stanley Savige, 1960
Minutes from the 11th meeting of the committee held at Legacy House on 15 July 1960 reveals that 2000 copies of the book had been sold but sales were slowing. Because minutes of the 9th and 10th committee meetings are missing, information on the project is incomplete, but these minutes refer to the fact that the author wanted his loan of $1000 to be refunded, reversing his advice in the minutes of the 15 December 1958. The copy of the financial statement noted as attached to the minutes is missing.An indication of possible sales results of the sale of the biography of Sir Stanley Savige.One quarto size sheet of copy paper, carbon copy of minutes of a meeting about the biography.savige book, biography -
Bendigo Historical Society Inc.
Photograph - FOSTERVILLE GOLD MINE COLLECTION: NORTHGATE MINERALS
Colour photo: group of 30 workers dressed in high visibility clothing and helmets, from Northgate Minerals Mine at Fosterville, 2009. People are standing in front of a jumbo drill rig, behind rig is canopy of eucalypt trees. Names from back left: John Keane, Andrew Aitkin, Warren Perrymen, Adrian Gath, Geoff Viney, Khan Oats, Ash Ryan, Dean Maltby, Vaughn Hobden, Gerard Sheppard, Brian Sewell ( standing on jumbo rig ) Simon Doyle, Chris Murrell, Brett Jensen, Tommy Donaldson, Stuart Lynn, Erran Matana, Gwen Aitkin, Chris Fellows, Greg Farmer, Kane Andrea. Sitting at front from left : (unknown) , Andrew Binks, Damien Slow, Jason McKinley, Jeff Norris, Ian Cowan. Photo was formerly in Folder 56.mine, gold, northgate minerals fosterville, fosterville, northgate minerals, crocodile gold, mining, gold -
Federation University Art Collection
Mixed media, 'Line of Sight' by Debbie Lloyd, 2007
Debbie LLOYD Debbie Lloyd returned to study in 2005 completing a Bachelor of Fine Arts (Visual Arts) degree at the University of Ballarat (now Federation University) in 2007, with honours the following year. She returned to the university as Artist in Residence in 2009. During her time at the University Debbie exhibited in many group exhibitions and her work was selected for the National Graduates Show at PICA in Western Australia. Debbie’s first solo exhibition was held at Space22 in Ballarat, towards the end of 2010. This item is part of the Federation University Art Collection. The Art Collection features over 1000 works and was listed as a 'Ballarat Treasure' in 2007.Two artworks featuring a third dimension created with folded paper. Artist's Statement: "My artwork explores the visual experience that can be achieved using black and white, lineal patterns or by creating illusion and surface movement through the simple manipulation and repetition of forms. In these works I have used everyday objects, and shapes, repeated, reconfigured and recontextualised to provide the viewer with visual challenges that slow down and complicate the reading of the work. In the words of a former lecturer of mine, who kindly delivered the opening speech at one of my exhibitions – There is in Debbie’s work a belief in the transcendental power of repetition, a tribute in many respects to the fact that human kind is defined by nothing more noble and uplifting than its ability and obligation to persist." (http://100thgallery.com/gallery/debbie-lloyd/, accessed 08 May 2018) art, artwork, debbie lloyd, available, recycling, envelopes -
Flagstaff Hill Maritime Museum and Village
print - Picture of Sailing Ship, Rowland Hilder 1905 -1993, 20th Century
The use of sails to propel a ship along its course dates back at least to 3000 BC., to the Egyptians who used sails to move their vessels up and down the Nile. Sailing ships then developed with the Greeks, Romans, Phoenicians, Vikings and other cultures. Their use was widespread until the 19th century which saw the development of the steam engine, and more recently, the diesel engine. Sailing ships slowly declined in use and number until now, most sailing ships are used for recreational purposes.This picture shows the widespread use of sail for trading purposes.Picture of a sailing ship at a wharf with other ships in the background, by artist Rowland Hilder. Natural wood frame.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, maritime painting by rowland hilder, painting of sailing ship -
Eltham District Historical Society Inc
Work on paper (item) - Photograph, 2 Metery Road, Eltham South
Robert and Ada Zull built an Alistair Knox designed house at 2 (lot 8) Metery Road, Eltham, a one acre property for their family of five in the mid 1960s. The form of the house is laid out on the cleared block. There was a dam at the bottom of the block. Susan Bennett, nee Zull's reminiscences are published in EDHS Newsletter, February and April 2020. ".. the block was big.. Building the house was slow going. The plans had to be discussed, then drawn up, finance found, council permits obtained and labourers engaged. " This series of photographs together with the account of personal remiscences provide a unique document of the construction of an Alistair Knox designed home. Knox was a pioneer in the use of mudbricks and recycled materials and is significant to his contribution of this style of architecture in Eltham and the wider Shire of Nillumbik.zull family, clearing, eltham south, 2 metery road, alistair knox, bow and arrow -
Eltham District Historical Society Inc
Work on paper (item) - Photograph, 2 Metery Road, Eltham South
Robert and Ada Zull built an Alistair Knox designed house at 2 (lot 8) Metery Road, Eltham, a one acre property for their family of five in the mid 1960s. Concrete footings are poured. The house had a concrete floor. Susan Bennett, nee Zull's reminiscences are published in EDHS Newsletter, February and April 2020. ".. the block was big.. Building the house was slow going. The plans had to be discussed, then drawn up, finance found, council permits obtained and labourers engaged. " This series of photographs together with the account of personal remiscences provide a unique document of the construction of an Alistair Knox designed home. Knox was a pioneer in the use of mudbricks and recycled materials and is significant to his contribution of this style of architecture in Eltham and the wider Shire of Nillumbik.zull family, eltham south, 2 metery road, alistair knox, bow and arrow, footings, concrete, concrete mixer -
Kiewa Valley Historical Society
Book - Reference Printing, Charles W. Hackleman, Commercial Engraving and Printing, Circa 1921
This item relates to methods of reproducing photos on all forms of material in an era of physical offset printing.The offset method is being replaced by digital transfer direct to the final product,(paper or other porous and non porous surfaces). Newspapers and other "paper" information publications are still producing "hard copies" but these are slowly being phased out. This item was used Circa 1920s in the peek period of paper based media. From the 1940s radio and then television stepped into the mass media revolution.This book was produced when all printing, Government and private enterprise, was using the "off set" method. This method was used to a great degree in all schools within the Kiewa Valley. It was in an era before "photo-copying machines" were available. This was a period when printing inks for larger printing machines had to be purchased from specialised outlets and printing presses required to be washed after each "run" of printing before the next plate(aluminium) could be fastened onto the "off sett" machinery. Heat infusion now used in large machines and domestic printers has superseded this task. Faded green cloth covered book with green papered front and back sleeve pages.Photos and sketches are throughout the book. Gloss paper used from page 1 one to page 400. Pages 401 to page 432 are not gloss paper. The type of paper varies throughout the book until final advertisement and index pages, from page 833 to page 846, are on gloss paperThe spine cover is badly worn and wording is faded. Front cover has"Commercial Engraving And Printing" Author and publisher details written by Charles W. Hackleman. Published by Commercial Engraving Publishing Company, "A Manual of Practical Instruction and Reference Covering" Commercial Illustrating and Printing by all Processes.technical book, reference for engraving and printing -
Eltham District Historical Society Inc
Photograph, View from Breakneck, Yarra Glen, 27 August 2016, 27/08/2016
"Until 1865, all wheeled traffic to the Upper Yarra District passed through Christmas Hills along present day Ridge and Muir roads, then followed the hazardous course of "The Breakneck" (now Breakneck Road) to the valley below. To slow the descent of wagons, logs are said to have been dragged behind. In 1865, an easier route was opened on the south side of the Yarra River, and led to the birth of Lilydale". - Christmas Hills Past and Present (Yarra Glen District Historical Society), 2004.Digital copy of colour photographfred mitchell collection, 2016, breakneck, yarra glen -
Eltham District Historical Society Inc
Photograph, View from Breakneck, Yarra Glen, 27 August 2016, 27/08/2016
"Until 1865, all wheeled traffic to the Upper Yarra District passed through Christmas Hills along present day Ridge and Muir roads, then followed the hazardous course of "The Breakneck" (now Breakneck Road) to the valley below. To slow the descent of wagons, logs are said to have been dragged behind. In 1865, an easier route was opened on the south side of the Yarra River, and led to the birth of Lilydale". - Christmas Hills Past and Present (Yarra Glen District Historical Society), 2004.Digital copy of colour photographfred mitchell collection, 2016, breakneck, yarra glen -
Vision Australia
Photograph (item) - Image, Woman and talking book machine
Talking Book Machines were used by clients for audio books sent out by libraries for the blind and visually impaired. In this undated photograph, the machine appears to be either a cassette or cartridge player, and the top and cardigan worn by the lady, indicates that this image may have be taken in the 1980-1990s. Talking Book Machines had more features than a regular cassette player, combined with the various speeds used and tone indexing, allowed readers to skip through the book or slow it down.audio equipment, talking books, royal victorian institute for the blind -
Wodonga & District Historical Society Inc
Functional object - Water Pump Pressure Gauges, North East Region Water Authority, Wodonga
The water pump pressure gauges were used by the Wodonga Waterworks Trust and Sewerage Authority, which were established in 1897, and had the responsibility for providing Wodonga's drinking water and managing the wastewater. In 1923 a Wodonga Waterworks Trust referendum to provide funding for new infrastructure to supply more water of better quality to Wodonga was passed. This included building the Wodonga Water Tower and it was completed in 1924. It supplied water to Wodonga until 1959, when it was drained and decommissioned after the No 1 Basin on Huon Hill was completed in 1958. In 1983 the Wodonga Waterworks Trust and the Wodonga Sewerage Authority became part of the Wodonga Council. By 1989 a filtration plant at Huon Hill was completed, which provided filtered water of improved quality to Wodonga, in accordance with the World Health Organisation’s guidelines. In 1994 the Kiewa Murray Region Water Authority took over the Wodonga Council’s water and wastewater operations, and then in 1999 the Kiewa Murray Region Water Authority combined with the Ovens Region Water Authority and became the North East Region Water Authority or NERWA. NERWA then became known as North East Water.The water pump pressure gauges have local significance due to their use by the Wodonga Waterworks Trust and Sewerage Authority, and donation from the North East Region Water Authority. They also have wider historical significance as examples of the equipment used in the management of water in Victoria and Australia.Five metal and glass water pump pressure gauges, including one with a U-shaped pipe and lever attached. "-HOMPSONS (CASTLEMAINE) LT-" on pressure gauge no.1 "BOURDON'S / PRESSURE GAUGE / THE AUSTRAL OTIS /ENGINEERING Co. LD. / MELBOURNE" on pressure gauge no.2 "No. 1609 / POUNDS PRESSURE / PER SQ. INCH / FEET HEAD OF WATER" on pressure gauge no. 3 "FEET HEAD OF WATER / THOMPSONS (CASTLEMAI-- LTD" on pressure gauge no. 4 "SET SLOW 33' -" / BUDENBERG / MADE IN AUSTRALIA / ft water / 1 4 9 3 9 each number underlined" on pressure gauge no. 5north east region water authority, nerwa, wodonga sewerage authority, north east water, n.e. water, wodonga waterworks trust, pressure gauges, water pump pressure gauges -
Kiewa Valley Historical Society
Badge Red Cross, circa 1968
When this winter appeal badge was produced the Australian economy was in recession (financial down turn) and the ability of some of the unemployed sectors of the community required but could not purchase warm clothes. The Australian recessions of 1945 and 1961 left their mark on the economy and accounted for a long and slow recovery in the 1960's and 1970's. The Red Cross was one of a few benevolent agencies/organisations that provided those more affluent in society to donate money to these types of appeals for financial donations. the money collected was used in obtaining warm close for those in need.In the Kiewa Valley the lingering recessional consequences (high interest rates, slowdown in Australian manufacturing) had an effect upon those whose produce was consumed by large towns and cities. The manufacturing industries including textile and clothing industries were feeling the start of the invasion of cheaper imports. Unemployment was beginning to be an ongoing major political and social issue. The need for support for the financial strapped city and country towns was on the increase and this Red Cross Badge (Winter Appeal) was one of several appeals to help those financially disenfranchised families to overcome the severe clothing shortages in both country and city environments.This badge has an enamel front with red and blue lettering and the circumference is marked to represent a 'life ring, life buoy, life belt' which has all of the red lettering with in its boundary. The fastening mechanism is a "stick" pin made from mild steel (fashioned as a semi circular spring contained within the back rim of the badge. The "stick" protrudes beyond the badge allowing it to be fastened onto clothing.At the top of the badge and in red print "RED CROSS" and at the bottom "WINTER APPEAL" with a"1/-" (one shilling coin - modern equivalent to 10 cents). In the middle of the badge is printed a red cross and above that "HELP"societies, red cross appeals, apparel badges, numismatics badges -
Kiewa Valley Historical Society
Rod Fishing, circa early 1900's
This bamboo fishing rod was used in the mid to late 1900's and demonstrates that local production of recreational fishing poles was at a high level and their demand was high. Imported recreational sporting goods from either the United Kingdom, the United States of America or Asia countries was due to the larger lead up times from these suppliers and the greater import costs from slower ocean supply ships. It was only after World War II that the trade influx from other countries has supplied cheaper goods. This recreational fishing pole is highly significant to the Kiewa Valley as it demonstrates that recreational fishing has been evolved from the need to supply a balanced diet by the early pioneer families of fish from the major Kiewa rivers. The ability of the Kiewa Valley rivers to provide a good fishing environment (high protein diet) for both early indigenous families and early pioneers was the important food source that provided for a balanced diet and the higher level of nutritious development of both body and mind. This two piece wooden fishing Rod is made from bamboo shafts or poles, one length thicker than the other. The smaller diameter shaft is the top end and fits into the longer thicker shaft at a stainless steel tube end.The smaller shaft has a stainless steel reinforcement ring where both shafts fit together. At the bottom end of the thick shaft is a black rubber "stopper" or "foot". There are two stainless steel rings, each with a reel holding "bulge" which allows for the the reel's "prongs" to be secured. The top ring has a greater diameter allowing it to move up and down the shaft/pole to secure the top "prong" firmly onto the shaft/pole.recreation, river, rod, fishing, industry, fish -
Puffing Billy Railway
Rail Bender No. 3
Rail Bender - Part of Hydraulic Rail Bender Rail Bender – No. 3 Most rails are produced straight. While they to easily bend and appear flexible, they are required to bend for some curves, at rail joins on curves and at point (turn-out) junctions. For a safe transition around curves and in the finer areas of the point, this use to be done with a manual rail bender. Sometimes referred to as a Buddah, the rail bender attaches its two claws to the rail. In the middle of the two claws is a screw that is tightened slowly using large spanner. Historic - Railways Permanent Way and Works - track equipment - Rail Bender large Rail Bender - Part of Hydraulic Rail Bender made of cast wrought iron puffing billy, rail bender -
Vision Australia
Programme - Text, Twenty-third Presentation of the 3KZ Carols by Candlelight program 1960, 1960
Carols by Candlelight is a Christmas concert held at the Sidney Myer Music bowl. Programs and candle holders were sold, and collections made during the event to raise money for the Austin Hospital and the Royal Victorian Institute for the Blind. 3KZ also recorded the concert, which was played on radio on Christmas Day with a phone number to ring to donate. Prior to the Carols program at 9pm, the performance was opened by the Melbourne Lord Mayer and the process of torchbearers (100 girls dressed in white flowing dresses walk slowly in time with the music to the stage) as a prelude to the event.1 volume with photographs and illustrationscarols by candlelight, austin hospital, margot sheridan, lawrence warner, royal victorian institute for the blind, gwen bowdler, johnny o'keefe, norman swain, bernard evans, philip gibbs, norman k mcleod, syd morgan, dr charles bennett, harold stokes -
Flagstaff Hill Maritime Museum and Village
Functional object - Mincer, late 19th or early 20th Century
A meat grinder, commonly known as the meat mincer, is used for chopping meat into fine pieces. Alternatively, it can be used for the mixing of raw or cooked meat, fish and vegetables. It is the best way to process meat, and is a widely used piece of equipment by butchers and in the home.. Butchers have been known to use either mincing knives or meat cleavers in the kitchen for years to produce a quantity of minced meat. This was a slow and laborious process. The advent of the meat mincer has not only made the mincing process easier but also faster. The meat mincer has slowly evolved over the years into what it is today. The first meat mixer or meat mincer was invented in the 19th century by a German inventor named Baron Karl Drais. Although some versions of the device date back to much earlier. The oldest form of meat mincer was hand cranked which forced meat through a metal plate with several small holes in it, which resulted in long and thin strands of the meat. The meat was fed into the funnel that was placed at the top of the mixer. This meat would pass through a hand cranked screw conveyor that would squash and mix the meat before passing it through the metal plate. Needless to say, this was again a slow and laborious procedure to follow to produce large quantity of meat. With passage of time, this hand cracked machine became powered by electricity. The meat mincer has a great adaptability and efficiency now. The huge variety in mincer plates allows a butcher to produce different types of minced meat in any shape desired. However, traditional manual meat mincers have not really changed a lot. They are manually operated and made of cast iron, as earlier. They are similar to the original mincer designs, dating back to the early 1900s. Some butchers still prefer using a variety of mincer knives. Adapted from: https://brennan-group.com/blogs/news/history-of-the-meat-mincerThe development of the meat mincer enabled both butchers and home cooks to process and grind meat effectively.Clamp on meat mincer with handle for rotating the mincing apparatus inside.None.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, meat mincer -
Ballarat Tramway Museum
Newspaper, State Electricity Commission of Victoria (SEC) and The Courier Ballarat, Apex declines to enter tram dispute, Mar. 1962
Yields information about the views of various letter writers, special trains for the Begonia Festival and issues re costs.Foolscap sheet of plain paper, with rounded corners, with 5 newspaper cuttings, concerning the mooted closure of the Ballarat Tram system 28 Feb and 2 March 1962. All from The Courier, unless noted otherwise. 1 - "Trams in 1886" - 28-2-62 - about the formation of the Ballarat Tramway Co. 2 - "Keep Trams" - 28-2-62 - about the lack of trams for church and public service 3 - "Apex Declines to Enter Tram Dispute" - 1-3-62 - determined not to support the Union to support the trams 4 - "Track Times" - 1-3-62 - letter about the speed of the tram service, slow, notes a Mr. Mawby comment. 6 - "Tramway Discussions" - 2-3-62 - Editorial commenting on the APEX decision, Union request, service clubs, becoming a political issue, community support for the trams.closure, letter to the editor, editorial, sec, apex