Showing 5214 items
matching timbering
-
Surrey Hills Historical Society Collection
Photograph, W J Vine, timber merchant and ironmonger, c1899
Vines Timber yard was established in 1897 after the timber yard established by Donald Douglas in 1887 was acquired by William James Vine in 1896. Vines Timber yard was managed by William and his son Albert Ernest (Ernie) until the 1950s when there were no vacant blocks of land in Surrey Hills and less requirement for building materials. William Vine is listed in the 1893 directory as living in Albany Crescent. He married Sarah Elizabeth Gunner in 1881. The business was badly affected by a large fire in 1920. Albert Vine (1903-1968) was a Camberwell councillor from 1926-1934. He was also Mayor of Camberwell in 1940/41 and a councillor from 1937-1944. His son Ernest Albert also becoming a Councillor and Mayor of Camberwell. Exterior of building of W J Vine timber merchant and ironmonger in 1899. There are 5 men standing outside. 'Year 1899' in lower LH cornerbusinesses, timber merchant, ironmonger, vine's timber yard, donald douglas, william james vine, ernie vine, albert ernest vine, sarah elizabeth gunner, sarah elizabeth vine -
Wodonga & District Historical Society Inc
Photograph - Dunstan & Son, Wodonga
Mr Arthur Dunstan established a sawmill at Glen Wills in 1931 which operated for about 16 years. A larger and more modern sawmill with drying kilns was erected at Eskdale in 1947. He was contracted to build Wodonga’s municipal saleyards in 1935, followed by the Wangaratta saleyards which created so many forward orders that he bought a large block of land on the corner of Beechworth and Tallangatta Roads and opened a timber mill and hardware store. In 1974 other sawmills opened in Tallangatta Road near Chapple Street to cope with the expanding business. A large proportion of the company’s timber output was processed at the Wodonga yards into flooring, weatherboards, mouldings, and practically the whole output was distributed locally and throughout the Riverina and eastern freeboard of New South Wales, and Canberra. At its peak Dunstan’s was one of the biggest sawmilling businesses in Victoria and in Wodonga employed 150 people and milled 16,000,000 super feet of timber annually. Arthur Dunstan died in 1963 and the business was carried on by his sons Arthur Jr, Jack and Les, together with Reg McDermott and Neil Carr. Dunstan’s timber yards in Wodonga were sold to Ezard Industries in 1987 with the retail section being bought by BBC Hardware. Hardy’s took over the timber yard in 1989 and staff was gradually reduced to 51 by 1991. Processing fell to 1000-1200 tonnes of pine a month by 1992 and Hardy’s, by then part of Pacific Dunlop, finally closed operations in that year with the loss of the remaining 27 jobs. The area where Dunstan’s was located is now known as Southside.A black and white photo of a retail buildinga and workshopOn shopfront: DUNSTAN A & SONS HARDWARE JOINERY & TIMBER MERCHANTS RICKSHAW MAGICOLOR We stock and recommend HARDIES FIBROLITE SHERWIN WILLIAMS PAINT FINISHESdunstan's hardware wodonga, wodonga businesses, dunstan's timber -
Marysville & District Historical Society
Photograph (item) - Colour photograph, 1996
A colour photograph of the timber tramway bridge along the Michaeldene Walking Track near Marysville in Victoria.A colour photograph of the timber tramway bridge along the Michaeldene Walking Track near Marysville in Victoria. The Michaeldene Trail to Taggerty River Lookout is a 4.3 kilometer lightly trafficked loop trail located near Marysville, Victoria. The track is one of several walking tracks located in and around Marysville in Victoria.1996timber tramway, michaeldene walking track, marysville, victoria, walking track -
Upper Yarra Museum
Technical drawing - blue print, Details of Timber Truck Ironwork, 17.07.1912
DWR-00286 Details of Timber truck ironwork, Victorian Hardwood Company, Powelltown, 1919. Blue Print.Victorian Powell Wood Process Ltd details of timber truck ironwork scale 1 1/2" -3" = 1 foot Sheet No 17 11/07/12 Note:- the number off each part are for one wagon only -
Clunes Museum
Photograph, 1939
THIS PHOTOGRAPH IS OF 1939 CENTENARY OF CLUNES STREET PARADE, BLACK AND WHITE HORSES , WITH RIDERS IN FANCY DRESS.BLACK AND WHITE PHOTOGRAPH OF PARADE OF HORSES AND PEOPLE IN SERVICE ST. CLUNESA. ARNOLD TIMBER MERCHANTlocal history, photography, photographs, shops, auction mart, events and celebrations, back to clunes -
Eltham District Historical Society Inc
Brochure, 'Illilawa', Research
Timber Cottage circa 1881 at 35 Ingrams Road, Research.Printed Real Estate brochure of 'Illilawa', Ingrams Road, Kangaroo Ground featuring pretty stucco and timber cottage, bay windows, open fireplaces, loads of charm and character.houses, research, illilawa, ingrams road -
Orbost & District Historical Society
wages sheets, Henry's Timber Company Pty Ltd, 1973 - 2003
These forms were used by Henry's Timber Company in Newmerella. Hec Pow and his father sold the Newmerella mill to Henry Silverberg and Les Grace. The mill is currently owned by Mectec.Orbost has historically been based on the timber industry, but that industry has declined considerably over the last 20 years. The number of locals involved in the timber industry has declined and many of the mills have closed. This item reflects a time when that industry was a significant contributor to the economy of the district.Twenty-eight dark green hard-backed folders, with black spines and silver metal fastenings, containing wages sheets for employees of Henry's Timber Co Pty Ltd.All have labels with "Henry's Timber Co Pty Ltd" and dates of wages sheets included. They are hand-written.timber-industry-orbost henry's-timber-company -
Tarnagulla History Archive
Photograph: Support timbers from Poverty Reef, Tarnagulla, 1999
The timbers date from 1898 when the shaft was re-lined by the Bendigo Consols Company. David Gordon Collection. Colour photograph depicting a stack of support timbers after they were removed from the Poverty Reef shaft, Tarnagulla in 1999 by Western Mining Corp. mining -
Otway Districts Historical Society
Photograph, Knox Collection, Pettit's Siding: A loader, teamster and their six-horse load, c.1920
Originally known as Smith's Siding, in November 1914 the siding was renamed "Pettits" following the sale of a nearby mill to the north. The sawn timber was initially carted out by bullock wagon but the mud and slush caused such difficulties that Pettits caused a thirty chain incline to be built from the mill to a tramway. The tramway connected the mill to the railway until 1924. An annual average of 2,450 tonnes of timber was despatched from the siding. No provision was made for passenger traffic. After ten years Pettit Brothers had cut out the area and moved on, abandoning the siding which was put out of commission on 23 September 1924. However, local residents, not wishing to suffer the loss of railway facilities, managed to have the siding reopened in February 1925 for goods and passengers. It was lightly patronised until all traffic ceased in 1936. B/W. Sam Knox, timber loader and tallyman, and George Pritchard, a teamster, resting at Pettit's Siding after delivering a six-horse-drawn load of timber to the Siding. Stacks of wood awaiting transport by rail are in the background.pettits siding; wyelangta; railways; smith's siding; sam knox; george pritchard; -
Marysville & District Historical Society
Book - Hardcover book, Peter Evans, Rails to Rubicon-A History of the Rubicon Forest, 1994
Hardcover. Green dust cover. Front cover photograph is Krauss 0-4-OWT, builder's No. 2459 of 1891, takes water at the western end of Rubicon Lane in 1934. Driver Bob Rees attends to his engine while brakeman Hayden looks on. End papers show a photograph of a man standing besides a timber railway trolley holding onto the brake lever. There is a group of men, some sitting and some standing, on piles of cut timber under a large, open shed in the background. There are also some small, timber, tent like structures standing next to the railway tracks. There is a forest in the far background. Written in white is the line "Mr Clarke & Kidd's Sawmill". non-fictionrubicon, timber, sawmill, railway, tramway, clarke and pearce, evans, peter, marysville, krause, forest, mountain -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Craft - Craftwork, tape measure c 1880, c1880
c1880 This tiny tape measure, in Imperial measurements, was part of a Victorian era lady's sewing basket. The case is of polished timber, and the little winder, to retract the tape, is made of brass with a small ivory handleEarly settlers and market gardeners of Moorabbin Shire had to be self reliant producing their own food and making their farm equipment and clothing. The women of these families were skilful in all craftwork.c1880 this tiny, retractable, tape measure, in Imperial measure, is made of polished timber with a brass winder and ivory handle. Imperial ‘inch’ measurements on tape dressmaking, tape measure, sewing, craftwork, pioneers, early settlers, market gardeners, moorabbin, brighton, bentleigh cheltenham -
Churchill Island Heritage Farm
Tool - WEDGE
An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.Timber splitting wedge; steel; commercially made; has relief groove.timber splitting, churchill island heritage farm, olinda, shady creek -
Friends of Westgarthtown
Ship, model, Pribislaw'
Constructed with timber from the wreck of the Pribislaw by3-masted ship modeled on the Pribislaw and constructed from this ship's wood, salvaged in the Shetland Islands. On timber base with descriptive panel. Ship complete with trimmings - German flag, sails, ladders, steering wheel etc.In printed type, cut out and stuck onto the back end of the model ship 'Pribislaw' and 'Hamburg'.maritime technology, model ships, pribislaw, 1849, 1850, german migration, model ship, hamburg -
Orbost & District Historical Society
plans, Elliott Engineering Company Pty Ltd, 1980
These plans were used by POW Sawmills, Newmerella, probably owned at the time by Henry's Timber Company. Hec Pow and his father sold the Newmerella mill to Henry Silverberg and Les Grace. The mill is currently owned by Mectec.Orbost has historically been based on the timber industry, but that industry has declined considerably over the last 20 years. The number of locals involved in the timber industry has declined and many of the mills have closed. This item reflects a time when that industry was a significant contributor to the economy of the district.Eight large plans for various sections of POW's at Newmerella. The plans were drawn up for Bonang Timbers and Bowman.2317.2 - on back in pen "REC 24/9/80" 2317.3 - on back in red pen "INCOMPLETE SET OF PLANS" ; sticker with "Shire of Orbost Compulsory Inspection" 2317.5 - "DODD" in red ink (John H. Dodd Pty Ltd) -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, Holding M, 1996
House was demolished May 1997 to make way for RSL car park extension. Local information says house built c1900. Internal wall lining was of wall paper covered hessian attached to rough sawn timber.|Also second Photograph taken in Spring.Colour photograph of Ivy Cottage, taken early Autumn. Previously home of Bell Family in Grey Street. Timber dwelling has hipped roof with small gable at ridge, veranda across front supported by white timber veranda posts. Lakes Entrance Victoriahouses -
Halls Gap & Grampians Historical Society
Photograph - B/W, c 1870
Jane and Samuel Delley emigrated to Australia in 1857. By 1870 they and their young family had settled in the area at the entrance of the Fyans Valley and on the west of Fyans Creek. There they built a home and recognising the needs of passing travellers and timber-getters, they established Delley's Inn, providing food and refreshments to all in need.Timber dwelling with bark roof and two chimneys, one at either side of the house. In front stand four men and two women with two wagon drays in the foreground. The area is enclosed by picket fencing close to the house and a rough timber fence on the rear of the boundary. Delley's Inn,1870 on reverse in pencilbuildings, houses, accommodation, delley's inn -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, 1891
Frank Guy took timber and piles from Gippsland to Melbourne for wharf constructionSepia photograph of the masted barquentine Frank Guy with sails up being towed out the entrance by the S S Stormbird. Timber entrance piers quite distinct. Lakes Entrance Victoriawaterways, boats and boating, tourism -
Marysville & District Historical Society
Photograph (item) - Colour photograph, 01-1964
A colour photograph of the timber tramway bridge along the Michaeldene Walking Track near Marysville in Victoria.A colour photograph of the timber tramway bridge along the Michaeldene Walking Track near Marysville in Victoria. The Michaeldene Trail to Taggerty River Lookout is a 4.3 kilometer lightly trafficked loop trail located near Marysville, Victoria. The track is one of several walking tracks located in and around Marysville in Victoria.MARYSVILLE JANUARY 1964timber tramway, michaeldene walking track, marysville, victoria, walking track -
Whitehorse Historical Society Inc.
Photograph, 459 Whitehorse Rd. Mitcham
The house used to be the residence of Mr. Arthur Peake, owner of Peake and Cox, timber merchants, Mitcham. The house was on one side of Whitehorse Road and the mill was directly opposite. The Catholic Church built a primary school on the timber mill site and the teaching sisters lived in the house, which has now been demolished to make way for flatsColoured photograph of a house at 459 Whitehorse Rd. Mitcham, that had been built for Mr. Arthur Peake, timber merchant of Mitcham. House has 2 adobe-style archeswhitehorse road mitcham, no. 459 peake, arthur.timber merchants -
Ringwood RSL Sub-Branch
Edged weapon
Malaysian Kris with scabbardOrnate timber scabbard for decoration -
Orbost & District Historical Society
black and white photograph, 1975
The Donchi family has been cutting sleepers since the 1890s in the Orbost area. This photograph , one of a set of six, was taken for an article in the Victorian railways Magazine in 1975. This was a pamphlet produced for Victorian Railways. . It contains photographs and an article about Orbost as "Timber Country" and a detailed article titled, " Cutting Sleepers is a Family Business" which tells about the Donchi family.This item is associated with the timber and sleeper-cutting industry in the Orbost Region. Timber sleepers were superceded by concrete sleepers in c. 1970s. Orbost has historically been based on the timber industry, but that industry has declined considerably over the last 20 years..The number of locals involved in the timber industry has declined and many of the mills have closed. This item reflects a time when that industry was a significant contributor to the economy of the district.A black / white photograph of a bush scene of a timber harvesting coupe used by the Donchi family.on back - Pr 8766sleeper-cutting-orbost donchi-orbost timber-industry-orbost -
Tatura Irrigation & Wartime Camps Museum
Fence Droppers, late 19th century to early 20th
Split timber fence droppers were used with the earliest wire fences especially with closer settlement areas like Tatura. The donors family were Tatura hardware and timber merchants so may have made and supplied these to farmers. 3 wooden dropper split with axe to shape rather than sawn. 6 holes for wire to pass through (6 gauge). Used between posts to support wires. Made from straight grained timber, grey box.fence dropper, wood fence dropper, fencing material -
Warrnambool and District Historical Society Inc.
Tool, Mitre press
This tool is used to clamp and hold pieces of timber together during the process of joining or compressing two pieces of timber together. The first block is stationary and attached to the end of the base while the second block moves with the turning of a long screw. It is used also in the process of bookbinding with a similar holding intent.An interesting object with a specific purpose which is still in working order.Wooden triangular shaped block which is divided in two pieces with one piece being moveable with the turning of a turned wooden screw device. It is quite heavy which would suggest that the timber is quite dense warrnambool, wood press, mitre press, book binding press, -
Warrnambool and District Historical Society Inc.
Functional object - Yard ruler, J Russell Pty Ltd, Mid 20th century
R J Russell operated a timber and hardware store in Koroit Street Warrnambool around the 1950’s. He succeeded from Newcombe Pty Ltd which had operated a timber and hardware store on the site (the present Target store) from the 1870’s. The business continued to trade under the Newcombe name after the death of Newcombe around 1900.A common well used item with links to a local business.Wooden yard ruler with markings in one eigthth inch measurements and numbered in inches. Text written in black on both sides.On front side: J Russell Pty Ltd. Timber and hardware merchants 148 Koroit Street Warrnambool. Phone 22. On reverse: Fencing materials, general hardware, paints, oils , Glass. Contractors or builders. Phone 22r j russell warrnambool, newcombe pty ltd warrnambool, timber yards warrnambool -
Orbost & District Historical Society
black and white photograph, VR Printing Works, 1975
The Donchi family has ben involved in sleeper cutting in the Orbost district since the 1890s. This phootograph , one of a set of six, was taken for the Victorian Railways Magazine, August,1975, a pamphlet produced for Victorian Railways. It contains photographs and an article about Orbost as "Timber Country" and a detailed article titled, " Cutting Sleepers is a Family Business" which tells about the Donchi family.Name Associated with the timber and sleeper-cutting industry in the Orbost Region. Timber sleepers were superceded by concrete sleepers in c. 1970s. Orbost has historically been based on the timber industry, but that industry has declined considerably over the last 20 years. The number of locals involved in the timber industry has declined and many of the mills have closed. This item reflects a time when that industry was a significant contributor to the economy of the district.A black / white photograph of Pat, Ken and Alan Donchi working a large saw at a timber coupe in Orbost.on back - Pr 8767timber-industry-orbost sleeper-cutting-orbost donchi-family -
Otway Districts Historical Society
Photograph, Knox Collection, Beech Forest: timber stacks, 1906, 1906
Beech Forest was the principal despatch centre for split timber and mining laths in 1906, most of which was carried to the railway yards by bullock wagons, or a horse-hauled wooden tramline along the Olangolah Road to the east of the town. At the yards it awaited trans-shipment by rail.B/w. 190mm x 265mm. Timber stacked in the Beech Forest railway yard. Four roads passing. A goods shed in the background. beech forest; railways; -
Glenelg Shire Council Cultural Collection
Photograph - Photograph - Dartmoor timber treatment plant and mill, n.d
Port of Portland Authority archives.Front: (no inscriptions) Back: Poles in the background. Timber treatment plant in middle. Mills at background. Photography by the Arthur Studio. Further copies always obtainable at 27 Commercial St. East, Mt. Gambier. (purple stamp, lower right) (upper left, pencil), 22 (lower right, pencil).port of portland archives -
Eltham District Historical Society Inc
Photograph, N. J. Tillings Timber Factory, 15 June, 1975, 15/06/1975
Fence yard with piles of timber. Weatherboard building in background. This is one of 7 B/W 8x10 inch photos with notes on obverse by Dick Crichton. Accompanying letter from Florence Chrichton 2013 : "Originally sent to Shire of Eltham Engineer, Mr. McDonald. [These photographs were part of their campaign to the Shire of Eltham in 1975] claiming that the zoning regulations were being breached by the occupants of various factories in the nearby light industrial zone [Brougham Street, Eltham] - to the detriment of those living in adjoining residential zones, and that, despite .. earlier objections and complaints, nothing was done about it." 1 black and white photograph printed with white borderInscribed on back: "Ryans Yard, Susan Street, (part owned by Tillings) showing Tillings surplus baulk timber (at extreme right and left) before milling. This timber is often also stored in Peel Street. Majority of baulks are stored at rear or side of Tillings main premises. Eltham High School object to transportation of this timber along Bell and Susan Streets in large semi-trailers. Trucks backing in and out of Tillings cause frequent traffic jams in Bridge Street (often around 8am)." industrial estate, brougham street, eltham, 1975, bolton street, dick crichton, n.j. tillings, timber factory, shire of eltham, susan street, bell street, eltham high school -
Whitehorse Historical Society Inc.
Document, Kelly Gang Film, 1994
Manuscript notes with typed copy. The 'Kelly Gang' film at 1320ft long which ran for over an hour is longer than the film 'The Great Train Robbery' (1903) claimed as the first full length picture made in the world.Manuscript notes with typed copy. The 'Kelly Gang' film at 1320ft long which ran for over an hour is longer than the film 'The Great Train Robbery' (1903) claimed as the first full length picture made in the world. 'Lowberry' timber house owned by McDonnells (with sketch map)Manuscript notes with typed copy. The 'Kelly Gang' film at 1320ft long which ran for over an hour is longer than the film 'The Great Train Robbery' (1903) claimed as the first full length picture made in the world. mcdonnell family, the story of the kelly gang (film), films -
Ringwood and District Historical Society
Pamphlet, Two catalogues from Ringwood Timber & Trading circa 1960s
Two catalogues of goods to sell, from Ringwood Timber & TradingEditorial of 15201b includes a short history of the company. In 1937, Mr S Coopersmith and son, Frank (the present Managing Director) started a fruit case manufacturing business in North Melbourne under the name of The Cooper Case Co. The business flourished, and in 1940, recognising the possibilities in and around Ringwood, an old bush sawmill and an area of land on the Maroondah Highway, were secured. Subsequent purchases have since increased this area to approximately 15 acres. It was decided to widen the activities and scope of the business and two new firms were formed. Cooper Sawmilling Co., which operated a modern sawmill, and Ringwood Timber & Trading Co., which handled the output of the sawmill and introduced builders' and general hardware lines to meet the demands of this rapidly expanding area. As Ringwood grew, so too did the organisation which was created to serve it. The principals studied timber and hardware merchandising trends overseas, and after considerable investigation the new building on Maroondah Highway was completed in 1956. Today, acclaimed as one of the most modern mills and hardware stores in the Southern Hemisphere, combining up to date machinery and handling equipment together with unique drive-in facilities and a self-selection centre. Ringwood Timber & Trading Co. are proud to offer a service unparallelled to home builders. In conformity with modern commercial practice the various firms have since been incorporated under the Victorian Companies Act and the latest accounting methods and office equipment have been installed to provide an efficient and virile administration to control the entire manufacturing and trading activities. We have a staff of over 220 personnel, each trained in their particular field to provide you, our valued client, with expert advice, quality merchandise and second-to-none service to enable you to fulfil every need in and around your home.