Conditions of sale by private contract dated 24th October, 1944 between Mr. T. J. Lynch (vendor) and Mr. L. G. Thirlwell (purchaser). Property: land situate No. 584 Hargreaves Street, Bendigo being part of Crown allotment 3A section 141C described in freehold title volume 5655 folio 1130899, together with 4 roomed weatherboard dwelling, all sundry outbuildings, bath, copper and stand, fly wire doors and window screens and all window blinds. Price: 275 pounds.organization, business, h.a. & s.r wilkinson real estate

Account for 5/18/6 dated Oct 1st. 1888 from T.J. Connelly & co., Ironmongers, tinsmiths, gasfitters, plumbers and copper smiths. For various work done for Connelly, Tatchell & Dunlop, including repair of safe, fitting locks and various hardware items. Letterhead contains image of building corner of Forest/High Street, Bendigo and ornate hanging lamp fitting.The top of the corner building has signs -T J Connelly Established 1853 .Green one penny stamp at the foot of the document

COIN, "CARTWHEEL" TWOPENCE, GEORGE III (1760-1820), copper alloy, struck at the Soho Mint, Birminghm, England, 1797. Round twopence coin, plain edge. On the obverse is a central effigy of George III with olive crown facing right, surrounding legend 'GEORGIUS III. D. G. REX". On the reverse is the central effigy of a draped female figure in helmet and carrying a trident (Britannia) seated on a shield facing left. She sits above waves and a ship is to the left in the background. The legend is '"BRITANNIA/179".See abovecoins, cartwheel twopence, soho mint, matthew boulton

These items were used by tram and bus drivers as part of the Metcard machine management system. The PM (portable memory) key was issued to each driver. At the start of a shift, the driver would put it into a cream-coloured terminal at the sign-on point (starter's office in the depot) and transfer their shift information onto the key. Once the driver reached the vehicle, they put the key into the black-coloured terminal (tram driver's keypad - TDKP or bus driver's keypad) to upload the shift data to the vehicle. See item 2582 for more details and other examples.Demonstrates an item used on buses and trams for management of the Metcard Machines and ticketting issue.Digital Memory module, or Portable Memory Key, equivalent in type to a USB stick, black plastic with a sliding mechanism to protect 8 copper contact strips with a digital memory area at one end. Stamped into the memory area part number "97100188. On the reverse side is a lable giving details of the owner, part number, and serial number and that it is subject to a charge in favour of the National Australia Bank. Has as key type appearance. Has a key retaining ring and key tag with "194 Williams 361798" printed on it.tramways, trams, buses, metcard, ticket machines

Bomford Bas Relief Mythological Goat. Created from Sheet Copper. Carved and hammered Bas relief of a mythological creature resembling a goat with long straight horns. The Carving was created by an artist in residence at the Bendigo Psychiatric Centre ( Golden City Support Services) prior to closure. It is approximately 1.5metres high and 1.00metre wide. Mounted on a Large green wooden board. See 7312 also. Items represent the constellations Capricorn and Aquila. Once completed, they were used to identify the Squila and Capricorn patient areas at the Psychiatric Centre.artwork, sculpture

Anieura. Four-masted wooden schooner, 1328 tons. Built California, 1918 as the Oronite. Reg. Melbourne, 1928. Lbd 236.5 x 42 x 29. Last captain, de Carteret. Stripped of anything of value at the Yarra Street Pier, Geelong, in 1932; burnt to recover her copper and brass, and sunk off Avalon Bach, two kilometres east of Point Lillias. She had been seized for debt. @ Her wreckage is scattered and overgrown, covered in light silt in 4 metres. [NWR],[LC],[NSC]A relic from the broken up Barque 'Anieura' in 1932/33: BARQUE ANIEURA. Left to Sink in Mud. GEELONG Monday -The hulk of the barque Anieura, which has been idle in Corio Bay for more than four years, was towed to a spot near Bird Rock on the northern shores of the outer harbour on Monday. The Anieura was built for the timber trade and made a journey to Australia. The owners then decided that the vessel was unsuitable for this trade, and she was sold to an Australian firm. The ship was placed in Corio Bay, and remained at anchorage for about three years before an effort was made to sell her. This being unsuccessful most of the fittings, were disposed of, and the hulk was taken to Fletcher's pier to be out of the way of shipping. The Victorian Salvage Co's offer to the Geelong Harbor Trust to dispose of the hulk was accepted. The 300 tons of road metal ballast was removed, and a quantity of timber taken out. The vessel was towed through the channel this morning and run aground near Bird Rock just outside of the north-east extremity of the bar where it is away from shipping. More timbers will be stripped from the vessel, and it is likely that she will be allowed to sink into the mud. The Argus Tuesday 4 April 1933. A wooden bunk from the 'Anieura', drawers underneath with brass handlesanieura, bunk, port phillip

WW2 Royal Australian Air Force. Also see statement of Signifiance.Example of WW2 Officers Tunic, this example has a Kings Crown on the sleeve which denotes that the tunic could have been worn as late as 1953, after 1953 it would have been a Queens crown. Crown and eagle denotes Air-Crew. Tunic material can determine which country the tunic came from, Dark Blue- Australia, Light Blue-England, in between, South Africa, Canada and New Zealand.RAAF Officers Tunic, Flying Officer, Dark Blue Wool Serge, with four pockets, inside lining is of black cotton, sleeve lining is of striped sleeve lining material. Five Red Year Shevrons on lower right sleeve, with waist belt with black bakalite buckle held in place by two buttons. Four eyelets to end of waist belt.On lower sleves Crown and Eagle in blackened copper with blue and white rank lace. Number of buttons in correct position (8). Lable in coller MTX Size 8 overwritten in black CRA.On coller lable which says MTX Size Eight, overwritten in black CRA.raaf, officers uniform

The Civil Air Patrol is the official USAF auxiliary. Formed during WW 2, it is currently tasked with search and rescue, communications, civil defense and aerospace education (via the CAP Cadet program) The Civil Air Patrol, while formed in WW2, became the auxiliary of the USAF when the air force was formed as a separate service in 1947. The uniform is based on the USAF uniform with distinguishing CAP insignia and badges. It is unusual to find CAP items in collections.Blue-grey wool serge USAF peaked hat with black patent leather peak (with light grey underside). Black leather chin strap secured by two 16 mm diameter metal buttons embossed with the USAF insignia. Dark blue hat band. Mid grey head band and light tan lining. Maunufacturer's label stapled and sewn to head band. Metal tab support for front of crown and metal strip reinforcement to edge of crown. Civil Air Patrol pressed copper alloy cap badge incompletely attached to hat. Manufacturer's Label - "100% ALL WOOL. EXCLUSIVE OF ORNAMENTATION. MFG WPL. No. 9379. 7 1/8. headgear

Two patterns of clasp knife were supplied to the Australian Military Forces in the WW2 era by the Carr Fastener Company. These clasp knives were identical to those made by Whittingslowe Engineers that were made in the Whittingslowe factory under contract to Carr Fasteners. William Whittingslowe had a close association with Carr Fasteners prior to WW2 and had been Chairman of Carr Fasteners for some time.Smaller sized canoe shaped body military steel clasp knife. The clasp knife is the Carr Fast second pattern with the improved tin opener, manufactured in Australia in the World War Two era. The clasp knife has a blade, a tin/bottle opener, a marline spike as well as a screw driver and a copper wire shackle used to attach the knife to a lanyard or belt clip. The body of the knife is held together by steel rivets. Indentations to aid opening are located on the top RHS of the blade, and on the top LHS of the tin opener. The end of the tin opener is shaped to a point.CARR FAST CO AUST D (broad arrow pattern) Dclasp knife, world war two, australian military forces, steel

The artefact is a short cross-section of part of a functional part of a brass fitting that suspended a gas lamp, providing structural support, and internally, supplying the gas for its ignition. It combines elegant design with the elements required for safe and efficient delivery of gas. It was recovered from the LOCH ARD shipwreck site. There are similar artefacts in the Flagstaff Hill collection. The LOCH ARD left Gravesend (London) on 2 March 1878, bound for Melbourne, with a crew of 37, 17 passengers, and a diverse and valuable cargo of manufactured goods, luxury items, and refined metal. Some of the cargo was intended for Melbourne’s first International Exhibition to be held in 1880. At 3 am, 1 June 1878, the ship was wrecked against the high limestone cliffs of Mutton Bird Island on Victoria’s south west coast near Port Campbell. Only two people survived the disaster — Tom Pearce, a male crew member, and Eva Carmichael, a female passenger. The cargo proved too difficult to salvage in the vessel’s exposed condition and was largely written off. The manifest of goods in the LOCH ARD’s holds included “Fittings gas (4 cases)”. The gas lighting of streets, public buildings, and the dwellings of wealthier private citizens, was already well advanced in the cities and major towns of the Australian colonies. In 1841 Sydney was the first to be gas lit with 23 street lamps, 106 hotel lamps, and 200 private residences connected to the Darlinghurst “gasometer” by an underground network of metal pipes. “The dim days of oil and tallow are gone by!” pronounced one newspaper, flushed with civic pride. The 1850s Gold Rush promoted a similar attitude of confidence and affluence in the Colony of Victoria. In 1855 Melbourne was connected to its own system of subterranean gas pipes despite the same high rates of 25 shillings per 1000 cubic feet being charged, (reduced to 15 shillings in 1865 with cheaper sources of coal). By1858 Kyneton had its own gasworks to light the town (fuelled by eucalyptus leaves) and Geelong followed suit in 1860. Had the LOCH ARD reached its intended destination in 1878, it is probable that the 4 cases of brass gas light fittings on board would have found a ready market.The gas fitting is significant for its association with the LOCH ARD shipwreck, which is of State significance and is listed on the Victorian Heritage Register S417. The fitting is an example of a late 19th-century plumbing and light fitting.A pressed brass gas light fitting, recovered from the wreck of the LOCH ARD. The elegant and functional fitting extends from an ornate 8cm diameter ceiling flange, and comprises two short lengths of fluted column pipe with a brass joiner that are severed (cut off) at the end. Within this decorative outer layer of 3cm diameter is a full length brass tube liner, which is in turn protecting a narrow 0.75cm copper gas pipe that also runs full length. The artefact is generally unrestored with reddish/cream sandstone concretion, but is in good condition.warrnambool, shipwreck coast, flagstaff hill, shipwrecked coast, flagstaff hill maritime village, flagstaff hill maritime museum, shipwreck artefact, maritime museum, gas lamps, gas lighting, gas works, brass fittings, gas pipes, loch ard, 1878 shipwreck, victorian affluence, colonial gas lighting

Conditions of sale by private contract dated 3rd April, 1945 between Mrs. E. M. Bradford (vendor) and E. J. Stirton (purchaser). Property: land situate no. 325 Barnard Street, Bendigo at present occupied by Mrs. Knight as tenant, being Crown allotment 12A section 49B Parish of Sandhurst City of Bendigo being land described in Crown grant volume 2580 folio 515907, together with 4 room weatherboard dwelling and all sundry outbuildings. Also copper, troughs bath and electric light fittings. Price: 220 pounds.organization, business, h.a. & s.r wilkinson real estate

Contract of sale of land dated 7th April 1955 between Mr. G.B. & Mrs. N. M. Seddon (vendor) and Mrs. May Phillips (purchaser). Property: land being part of allotment 4 section 85C being land described in certificates of title volume 2915 olio 817 and volume 2618 folio 510 and situate No. 12 Phillips Street, Bendigo together with weatherboard dwelling and all sundry, also all linos, blinds, curtains, electric light fittings and shades, electric stovette and electric copper. Price: 1,750 pounds.organization, business, h.a. & s.r wilkinson real estate

Pittock collection: four carpenter/painter's tools * rusted putty knife, 260mm L x 32 mm W * white painted putty knife, 210 mm L x 25 mm W * red handled spatula, rusted blade, marked A ?eg Steel product, 195 mm L x 25 mm W * steel scraping tool with wooden handle, copper sleeve joint, 150 mm L x 100 mm W Items stored in Pittock coach builder's box, reference 13000.1.

Yields information about the removal of the overhead in Lydiard St North, following the closure of the SEC operated tram system in Sept. 1971Set of two colour digital images taken by W. J. Llewelyn of the removal and cutting up of the overhead and cutting the copper trolley wire in Lydiard St North - Oct. 1971? Shows the method and equipment used. Has a van marked "Arch Smallgoods" in Lydiard St North. Shows the Mair St traffic light, and Railway Hotel on the corner. In the background is the George Hotel, St Paul's Technical College, and Union Fidelity Trustee Company buildings in the background. Warren Doubleday remembers being there at the time, but can't find a photograph of it and date.trams, tramways, lydiard st, closure, secv, overhead, demolition

Worn piece of old trolley wire (330mm long) of 89mm2 (?) cad copper wire. Taken from an old wire joiner within depot to be used as a sample of worn wire for use in ceremony of new trolley wire hand over on 26/11/96, when Victorian Minister of Transport, Alan Brown handed over new Trolley wire (2km) to Museum. Not known where made - could be either UK or Australia. Images added 3-12-2016 See The Courier, p6, 27/11/1996, see Reg. Item No. 503.trolley wire, btm

A coin that was issued by a Melbourne Marine store. Description by the Museums Victoria website. "Copper Halfpenny Token, minted by Heaton & Sons of Birmingham, circa 1861. Issued by Robert Hyde & Co, Marine Store, Melbourne. Hyde's Marine Store was listed in a Melbourne directory for the first time in 1862. Between 1863 and 1865 he was listed as being in a partnership with Richard Hodgson (Hyde, Hodgson & Co.). In 1868 his Marine Store became a Rag Merchant's business, before becoming a Marine Store for 1869 and 1870. The firm's principal business was dealing in second hand and scrap goods. Physical Description A round copper token (28 mm diameter) giving the name address and business of the issuer: Robert Hyde & Co. Melbourne. General Marine Store. On the reverse a coat of arms consisting of a central shield below a Rising Sun supported by an emu at left and kangaroo at right all resting on a ribbon with the motto ADVANCE AUSTRALIA. The shield is quartered and contains: upper left - a golden fleece; upper right - a three-masted sailing ship; lower left - a bull standing facing left; lower right an anchor. Around above, PEACE & PLENTY; below, the date of issue, 1861."bendigo, gold mining, qc binks, qc binks, robert hyde, marine store.

Booklet of 30 pages. Table of Contents: Editorial, Theatre party, Economic Geology of Victoria, Obituary - Andrew Anderson Esq., J. P., Our President, Coal, History of roasting at Kalgoorlie, Melbourne electric supply co, Australian coinage, Pilbarite, Liquid air, What is the "Expression" for "Success in the electrical engineering professions?", Students' annual excursion to Melbourne, Melbourne city council's electric light station, Modern tunneling, Estimation of copper, Oxozone - a fume destroyer, News and notes, Sporting notes, Answers to correspondents, Past Students, Editorial notes. Images.Pink coloured booklet of 32 pages. Page 25 outline the whereabouts of past Ballarat School of Mines Students: A.R. Booth, W.T. Lakeland, Lewis Westcott, Leo M. Seward, Reginald Williamson, Stanley White, Clyde Allan, Charles Laird, W.E. Eyres, Virgil Tucker, H. Hawkesworth, H.J. Saw, H. Meadows, Fred G. Brinsden, C. Stevenson, Fred Treloar, J. Peart, E.M. Weston, Dick Galloway, Richard Galloway, G.R. Curry, H. Meadows, Will Watson, Don Cameron, Eric Bieske, Cliff Garrard ballarat school of mines, staff, obituary - andrew anderson, esq., j.p., l. w. g. buchner, a. r. booth, w. t. lakeland, lewis westcott, leo. m. seward, reginald williamson, stanley white, clyde allan, charles laird, w. e. eyres, virgil tucker, h. hawkesworth, h. j. saw, h. meadows, fred. g. brinsden, c. stevenson, fred treloar, j. peart, e. m. weston, dick galloway, h. b. bennetts, g. r. curry, will watson, don. cameron, eric bieske, cliff. garrard, lindsay d. cameron, phil brown, w. p. avery, j. foster, j. bickett, f. h. inglis, g. davenport, l. c. courbould, t. lennon, h. wilkins, g. h. reid, c. hesselmann, e. fraser, reginald callister, a.r. booth, w.t. lakeland, leo m. seward, w.e. eyres, h.j. saw, fred g. brinsden, e.m. weston, richard galloway, g.r. curry, don cameron, cliff garrard

Tthe key letters “EP”, represent “electroplated” or “electroplating”. The other letters often represent some other metal. For example the most common designation, EPNS, means “electroplated nickel silver”. All these designations indicate that the piece in question is made of silver plate. Electroplating involves placing an extremely thin layer of silver on the surface of the piece. The resulting silver content is very small. The remainder of the piece is made of some more common metal such as copper. The value of such pieces most often is not based on silver content. It’s based more on the design and construction of the piece. The Surridge family were early settlers in Moorabbin ShireA pair of silver plated salad servers with porcelain handlesE.P.N.S.early settlers, pioneers, market gardeners, moorabbin, brighton, bentleigh, cheltenham, cutlery, silver plated cutlery, porcelain, mrs surridge

Pamela Irving (born 1960) is a prominent Australian visual artist specialising in bronze, ceramic and mosaic sculptures as well as printmaking and copper etchings. Irving's early art was influenced by artists including Arthur Boyd, John Brack, Noel Connihan, Mirka Mora, Sidney Nolan and John Perceval. In recent years, Irving has been influenced ″by the honest and direct expressiveness of ‘outsider art’ (the art of self-taught or ‘naive artists’) and the craft of ‘memoryware’″ Significantly, this interest grew following Irving's visit to Nek Chand's Rock Garden in Chandigarh, India.Green Wedge Larry - dog sculpture reminiscent of the iconic Larry LaTrobe located at Melbourne City Square. The dog is constructed from Italian Bisazza glass tiles, using a Mapei adhesive system. The theme for his 'coat' is the flora from the local surrounds of Nillumbik, drawing from the 'Live Local Plant Local' Nillumbik plant directory.green wedge, larry, dog, sculpture, mosaic, indigenous flora, irving

A saw is a tool consisting of a tough blade, wire, or chain with a hard-toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power sources. An abrasive saw has a powered circular blade designed to cut through metal or ceramic. In ancient Egypt, open (unframed) saws made of copper are documented as early as the Early Dynastic Period, circa 3,100–2,686 BC. Many copper saws were found in tombs dating to the 31st century BC. Models of saws have been found in many contexts throughout Egyptian history. As the saw developed, teeth were raked to cut only on the pull stroke and set with the teeth projecting only on one side, rather than in the modern fashion with an alternating set. Saws were also made of bronze and later iron. In the Iron Age, frame saws were developed holding the thin blades in tension. The earliest known sawmill is the Roman Hierapolis sawmill from the third century AD used for cutting stone.The subject item is believed to date from around the mid to late 20th century and is regarded as a modern item. The maker is unknown but the pattern or design and type of wood used indicate it is a tool of modern manufacture. Compass saw blade with wooden handle attached with wingnut.Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wood cutting, wood saw, cross cut saw, cabinet makers tools, wood working tools, tool

A saw is a tool consisting of a tough blade, wire, or chain with a hard-toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power sources. An abrasive saw has a powered circular blade designed to cut through metal or ceramic. In ancient Egypt, open (unframed) saws made of copper are documented as early as the Early Dynastic Period, circa 3,100–2,686 BC. Many copper saws were found in tombs dating to the 31st century BC. Models of saws have been found in many contexts throughout Egyptian history. As the saw developed, teeth were raked to cut only on the pull stroke and set with the teeth projecting only on one side, rather than in the modern fashion with an alternating set. Saws were also made of bronze and later iron. In the Iron Age, frame saws were developed holding the thin blades in tension. The earliest known sawmill is the Roman Hierapolis sawmill from the third century AD used for cutting stone.The subject item is believed to date from around the mid to late 20th century and is regarded as a modern item. The maker is unknown but the pattern or design and type of wood used indicate it is a tool of modern manufacture.Compass saw with wooden handle and metal blade. Small teeth. flagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wood cutting, wood saw, cross cut saw, cabinet makers tools, wood working tools, tool, compass saw

A saw is a tool consisting of a tough blade, wire, or chain with a hard-toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power sources. An abrasive saw has a powered circular blade designed to cut through metal or ceramic. In ancient Egypt, open (unframed) saws made of copper are documented as early as the Early Dynastic Period, circa 3,100–2,686 BC. Many copper saws were found in tombs dating to the 31st century BC. Models of saws have been found in many contexts throughout Egyptian history. As the saw developed, teeth were raked to cut only on the pull stroke and set with the teeth projecting only on one side, rather than in the modern fashion with an alternating set. Saws were also made of bronze and later iron. In the Iron Age, frame saws were developed holding the thin blades in tension. The earliest known sawmill is the Roman Hierapolis sawmill from the third century AD used for cutting stone.The subject item is believed to date from around the mid to late 20th century and is regarded as a modern item. The maker is unknown but the pattern or design and type of wood used indicate it is a tool of modern manufacture. Compass saw with wooden handle broken and metal blade. Small teeth.Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wood cutting, wood saw, cross cut saw, cabinet makers tools, wood working tools, tool, compass saw

A saw is a tool consisting of a tough blade, wire, or chain with a hard-toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power sources. An abrasive saw has a powered circular blade designed to cut through metal or ceramic. In ancient Egypt, open (unframed) saws made of copper are documented as early as the Early Dynastic Period, circa 3,100–2,686 BC. Many copper saws were found in tombs dating to the 31st century BC. Models of saws have been found in many contexts throughout Egyptian history. As the saw developed, teeth were raked to cut only on the pull stroke and set with the teeth projecting only on one side, rather than in the modern fashion with an alternating set. Saws were also made of bronze and later iron. In the Iron Age, frame saws were developed holding the thin blades in tension. The earliest known sawmill is the Roman Hierapolis sawmill from the third century AD used for cutting stone. The subject item at this time cannot be associated with an historical event, person or place, provenance is unknown, as the maker is unknown but the pattern or design and type of wood used indicate it is a tool of modern manufacture around the mid to late 20th century.Wood hand saw with wooden handle attached to saw by 4 rivets. No blade markings Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, handsaw, wood saw, carpenders tools, cabinet makers tools, wood cutting

A saw is a tool consisting of a tough blade, wire, or chain with a hard-toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power sources. An abrasive saw has a powered circular blade designed to cut through metal or ceramic. In ancient Egypt, open (unframed) saws made of copper are documented as early as the Early Dynastic Period, circa 3,100–2,686 BC. Many copper saws were found in tombs dating to the 31st century BC. Models of saws have been found in many contexts throughout Egyptian history. As the saw developed, teeth were raked to cut only on the pull stroke and set with the teeth projecting only on one side, rather than in the modern fashion with an alternating set. Saws were also made of bronze and later iron. In the Iron Age, frame saws were developed holding the thin blades in tension. The earliest known sawmill is the Roman Hierapolis sawmill from the third century AD used for cutting stone.The subject item is believed to date from around the mid to late 20th century and is regarded as a modern item. The maker is unknown but the pattern or design and type of wood used indicate it is a tool of modern manufacture. Compass saw blade with wooden with open handle blade attached with wingnut lever at side to adjust long narrow blade Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wood cutting, wood saw, cross cut saw, cabinet makers tools, wood working tools, tool

Reckitt & Sons' opened a branch in Sydney in1886. Brasso was developed by Reckitt & Sons in 1905. In 1938 Reckitt and Sons merged with J. and J. Colman to become Reckitt and Colman Ltd.Brasso was used by most Housewives for cleaning and polishing Kitchen Equipment in the City of Moorabbin during 20thC Metal container with blue sun burst effect, with a red circle with 'BRASSO' printed, in white and blue, inside. The instructions are printed on the back. FRONT: 'BRASSO' Back: Picture of the Royal Coat of Arms - By appointment to Her Majesty Queen ElizabethII. Suppliers of Metal Polish Reckitt & Colman Ltd. BRASSO Metal Polish for polishing Brass, Copper, Zinc, Steel, Pewter etc. SHAKE WELL Apply with a soft cloth. Polish off with a dry, soft cloth preferably before the polish has completely dried. DO NOT PLACE THIS TIN CLOSE TO THE FIRE Made in Australia by Reckitt & Colman (Australia) Ltd. No. 6 - Contents 6½ Fl oz when packed. brasso, metal polish