Drilling tests.mining, gold, gold mining, tin, tin mining, churn drill, drilling, machinery, el dorado, eldorado

Denis Gibbons (1937 – 2011) Trained with the Australian Army, before travelling to Vietnam in January 1966, Denis stayed with the 1st Australian Task Force in Nui Dat working as a photographer. For almost five years Gibbons toured with nine Australian infantry battalions, posting compelling war images from within many combat zones before being flown out in late November 1970 after sustaining injuries. The images held within the National Vietnam Veterans Museum make up the Gibbons Collection.A black and white photograph of Engineers, from 17 Construction Squadron, use a front end loader to deliver rock into a mobile crusher used to prepare fine rock material for all types of foundation work, used in construction projects throughout Phuoc Tuy Province, South Vietnam.photograph, engineers, 17 const sqn, phuoc tuy province, gibbons collection catalogue, photographer, vietnam war, denis gibbons, front end loader, machinery

These five photographs of the Komori Newkoni Printing Press were probably taken circa 1980s in Lithographic Squadron at the Army Survey Regiment, Fortuna, Bendigo. The photos are not annotated except for .4P. The Komori Newkoni Printing Press was a four-colour offset press. It was one of the replacements for the George Mann Printing Presses, however improvements to productivity were not realised as it was unreliable, was very cramped between decks and there were safety concerns for the operators. This lithographic printing machine built by Komori Printing Machinery Co., Ltd in Japan. The press was in service at the Army Svy Regt from 1975 to the 1980s.This is a set of photographs of the Newkoni Komori Printing Press operational at the Army Survey Regiment, Bendigo c1980s. The photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 300 dpi. .1) - Photo, black & white, c1980s, Terry Winzar, Lithographic Squadron .2) - Photo, black & white, c1980s, Roy Hicks, Lithographic Squadron .3) - Photo, black & white, c1980s, L to R: unidentified, Kim Reynolds, unidentified (x3), John ‘Flash’ Anderson, Lithographic Squadron .4) - Photo, black & white, c1980s, Per Andersen, Lithographic Squadron .5) - Photo, black & white, c1980s, John ‘Flash’ Anderson, Lithographic SquadronInscriptions and markings .1 to .5 – no annotationsroyal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, printing, litho

These are sales photographs for William Tatham Ltd. of Rochdale. These photographs are taken in the fitting shop at William Tatham Ltd. where final assembly would have taken place. The Automatic Feeding Machine automatically dispenses wool to a carding machine, so that an even, constant supply is received. This eliminated the manual labour previously needed for the initial weighing and feeding of wool. The photographed machine was made by William Tatham Ltd, a textile engineering company based in Rochdale, UK. Established in 1866, Tatham developed innovative textile machinery and sent their products to Australia and other countries around the world.Two black and white photos of an Automatic Feeding Machine in a landscape format. The first photo is of the front of the machine, the second is of the rear.8037.1 - Front - top margin: For description see over. Front mide right edge - Wm. TATHAM Ltd. ROCHDALE. Machine Maker Front bottom right corner - 1146 Rear - 78” wide Automatic Feeding Machine having Dual Hoppers in which the first and large section feeds the second Hopper so as to maintain a constant level of material in the latter. The driving of both spiked lattices is by electro-magnetic clutches, the one in the first Hopper being actuated by a sensitive feeler motion in the second, the second spiked lattice however, being controlled, of course, from the Scale Pan. Through a mercury switch. The scale is of our latest super-sensitive pattern mounted diagonally across the Feed. Only the opening doors are used in the actual weighting and the trap doors placed over the scale which close immediately the correct weight is deposited, operate through a solenoid. The machine incorporates many other features and is arranged to divide for facility in cleaning. 8037.2 - Front mide right edge - Wm. TATHAM Ltd. ROCHDALE. Machine Maker Front bottom right corner - 1147 Rear - Showing opposite side of Dual Automatic Feed illustrated in photo 1146textile machinery, automatic feeding machine, tatham, feeding machine

"Congratulations ... and sincere thanks from the R.V.I.B. to the management and patrons of all hotels who contributed so magnificently in 1985. Fred Berry" Hotels were involved in fundraising for the RVIB through the placement of Lucky Envelopes machines. To honour this establishments and those which had raised the most funds, a poster was produced listing each hotel and the amount that was collected throughout 1985. The United Kingdom Hotel in Clifton Hill reached first place and a photograph of hotel management and RVIB staff was taken. Other pictures on the poster include RVIB clients playing cricket, using machinery and learning to walk with a white cane.1 rectangular white poster with red and black text with black and white illustrationsroyal victorian institution for the blind, fundraising, fred berry

"The State Battery was the central component in the gold mining of this area from the 1920s. The battery crushed the gold bearing quartz extracted from the mines and was a sizeable weatherboard building enclosing the engine and stampers. All that now remains are the bases for the machinery that comprised the battery, one timber and a couple of concrete bases and the nearby dam, which supplied water. However the historic significance of the site remains and is enhanced by the Queenstown Cemetery on the other side of Smiths Gully Road". - Bick Study 1922 This site is now the Peter Franke Reserve and is managed by Parks Victoria Photo Source: The Leader, Nov. 2nd, 1929This photo forms part of a collection of photographs gathered by the Shire of Eltham for their centenary project book,"Pioneers and Painters: 100 years of the Shire of Eltham" by Alan Marshall (1971). The collection of over 500 images is held in partnership between Eltham District Historical Society and Yarra Plenty Regional Library (Eltham Library) and is now formally known as the 'The Shire of Eltham Pioneers Photograph Collection.' It is significant in being the first community sourced collection representing the places and people of the Shire's first one hundred years.Digital imagesepp, shire of eltham pioneers photograph collection, queenstown, st andrews, gold mining, smiths gully

Local newspaper clipping - 15/3/1945 - Passing of Old Pioneer.Born in Gloucestershire, England ... Settled in Ringwood and was employed at the old Federal Brickyards. It was here that he lost his arm, getting his hand caught in machinery. This handicap did not greatly interfere with his working capacity, and for years he was employed as carter at Bamford's timber yards. He married and settled down at Mt Dandenong Road, Ringwood East and acquired various properties. Interred Box Hill Cemetery on Friday, 9th March.

22 of a collection of 70 Black & White photographs taken during the construction of the second Phillip Island Bridge from San Remo to Newhaven by Country Roads Board and Shire of Bass. Contractor John Holland & Co. Pty. Ltd.14 Black & White photographs of the construction of the second Phillip Island Bridge in 1966 - 1969. 351-09: Pile driving on Newhaven abutment. 351-10 & 11: Concrete beams. 351-12: Pile driver. 351-13 & 14: Machinery. 351-15: Dismantled section of cylinder. 351-16 & 17: Coffer dam and pier construction. 351-18: Man up on scaffold. 351-19 & 20: Construction work. 351-21: Two workmen and man leaning on section of handrail exposed to weather. 352-22: View of construction work.Descriptions as above on some. Plus the following Numbering: 351-09: CRB NEG 67-274C. 351-10: CRB NEG 67-542. 351-11: CRB NEG 67-654F. 351-12: CRB NEG 66-605. 351-13: CRB NEG 66-601. 351-14: CRB NEG 68-752B. 351-15: CRB NEG 67-936. 351-16: CRB NEG 67-937A. 351-17: CRB NEG 67-937B. 351-18: CRB NEG 67-1156D. 351-19: CRB NEG 67-1156B. 351-20: CRB NEG 66-1026E. 351-21: CRB NEG 67-940. 351-22: CRB NEG 67-1218Bphillip island bridge construction, 2nd phillip island bridge construction, country roads board, shire of bass, sasha stark

Report from the Carlisle Gold Mining Company N. L. printed on cream paper and folded to 4 pages. The Directors' Report written by H. M. Leggo, ChairmanFinancial Report by J. ;G. Stanfield, Manager and audited by J. H. Craig, F.C.P. A., Auditor, dated 29th July, 1926 and the Mine Manager's Report stating work at different levels, the amount of ore crushed, how much gold and the amount of water bailed. Also the machinery being in good order. Written by J. Ennor, Mine Manager. Dated 3rd August, 1926.mine, gold, carlisle, carlisle mine, j. g. stanfield, h. m. leggo, j. h. craig, j. ennor, j r clark, e c dyason, l v lansell, a v leggo, a mackay

1. Agreement between Herbert Jackson Leed/South Wattle Gully dated 14.9.1936. 2. Agreement between Herbert Jackson Leed/John Jepson Stanistreet 24.7.1936. 3.Agreement Norman Loder/Herbert Jackson Leed 9.3.1936. 4. 23.9.1939 insurance policy (State Accident Insurance). 5..Hire agreement Miller & Co machinery & mine 6.9.1937. 6. Receipt for advance subscription to Commonwealth Loan 13.9.1946.7. Certificate inspection of boiler 19.11.1936. 8. Donation. 9. Purchase wire rope. South Wattle Gully Coy .N.L. (50).MCCOLL RANKIN & STANISTREETorganization, business, gold mining contracts, mccoll rankin & stanistreet

Two red covered ( one with cloth tape on the spine and edges) auction catalogues for a sale at the Big Bell Gold Mine, Big Bell, Western Australia, held on the 22nd to 27th August 1955 and 29th to 31st August and 1st to 3rd September, 1955. Sale consisted of Mining Machinery, Engines, Electrical Equipment, Pumps, Stores, Housing, Rolling Stock and Costly Equipment by Order of Big Bell Mines Ltd. J. H. Curnow & Son Pty. Ltd. Were the auctioneers. One catalogue has Mr. Curnow written on the front.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - big bell gold mine, big bell mines ltd, j h curnow & son pty ltd, prahran telegraph printing co pty ltd

Two greyish covered catalogues for an auction of Modern Mining and General Machinery, Buildings, Tools, Stores, Plant & Equipment held on the 30th May 1944 at the Wymah Wolfram Mine, Wymah, N.S.W., and on the 31st May at the Womobi Wolfram Mine, Womobi (near Granya) Vic. Sales by Order of Commonwealth of Australia - Department of Supply and Shipping. Catalogue gives the locality of the two mines. Sale conducted by permission of the Director of Machine Tools and Gauges under the Regulation 59 of the National Security (General) Regulations. J. H. Curnow & Son were the auctioneers.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - wymah wolfram mine & womobi wolfram mine, commonwealth of australia-department of supply and shipping, j l jamieson, the cambridge press

Blue handwritten one page document detailing 'Youngman & Harrisons Patent Basin for pulverizing quartz tailings and amalgamating fine gold with mercury'. Introductory comments the basin contains greater advantages for pulverizing quartz tailings & amalgamating than any yet constructed for that purpose; In its construction all machinery complications have been carefully avoided and yet it embodies all the best methods known for treating tailings and has besides other than advantages (both in cash and labour) that of treating puddling machine sludge and can be used as a concentrator with little or no extra expense.bendigo, mining, youngman & harrisons patent basin

Carlisle Gold Mining Company No Liability to Miss G. Alice Jones. Pink paper dated Feby. 29, March 5, 11, 13, Nov. 7, 14, 25, Dec. 3, 5, 10, 11, 19 1924, Jany 30, 31, Feby 2, 19, 1925. Account details work and costs re: Kirby, B.A.G. Ltd. To you. Transfer of G. M. Lease, B.A.G. Ltd. To you Machinery Lease. Total Cost 10.10.0. "Posted 7/7/25" written in top left corner.miss g. alice jones collection - account, carlisle gold mining company no liability, kirby, mr stanfield, b.a.g. ltd.

Leonard John Hudson was born in Prahran and moved to Castlemaine in his early years At the beginning of the war was refused entry to the services due to his "reserved occupation" as a motor mechanic working on farm machinery At night he worked as a machinist for Thompson's Foundry machining breech blocks for 25 pound field guns. (image) Eventually he was granted enlistment into the R.A.A.F. into 7 Airfield Construction Squadron as a Leading Aircraftsman 156990 and was sent to Milne Bay with the unit to build the air strip.As one of few diesel mechanics he was often required to assist the US troops with their maintenance problems at various sites in or near New Guinea. Rare surviving images of 7 ACS newsletter Hand coloured photograph of L. J. Hudson in RAAF tropical uniform 1944 Copies of the "Spruiker" Magazine illustrations from August 1945 published at Milne Bay by 7ACS (7th Airfield Construction Squadron) Photograph of 25lb. Field Gun at Thompsons Foundry Pages from Photo Album showing L. J. Hudson in uniform at Castlemaine (one with his wife R. J. Hudson ) and at Milne Bay7 acs, 7 a.c.s., milne bay, thompsons foundry, field gun, l. hudson, len hudson, castlemaine, 25 pound field gun, hudson, spruiker, 7th airfield construction squadron

From 1936, the Australians began to explore the feasibility of local production of steel helmets. Actual production by the Commonwealth Steel Company (in conjunction with Lysaghts) began in 1939. Made of manganese steel, it weighed about 1.1kg. Due to lack of machinery to bend manganese steel strip, the helmets were produced with a raw, but bevelled, edge. Almost two million helmet bodies were produced. Australian helmets were painted in sand textured Australian Army Khaki-Green No.3. A wide-meshed knotted net was often worn. The chin-strap was a copy of the British Mk.II. it was made with cloth covered springs and webbing.Green steel helmet with 8/7th RVR colour patch on each side

This helmet worn by SEC Victoria workers in the Kiewa Hydro Electricity Scheme is a mandatory safety requirement by all personnel employed by government and statutory agencies who worked on or around "dangerous" apparatus or underground location sites. This type of pressed fibre helmet was later superseded by moulded plastic helmets. The start of the project (late 1940's) was not greatly covered by later introduced health and safety regulations. This has been demonstrated by photos of workmen outside using heavy machinery and other apparatus, see KVHS 0396, KVHS 0405 and KVHS 0392. However in the tunnels and underground safety helmets were mandatory, see KVHS 0403.This safety helmet was used by workers during construction of the generators and tunnels of the Kiewa Hydro Scheme was issued once only to each worker during his employment covering the 1940's to 1960's period. The attitude to health and safety during this period, can be summed up by this "initiation" ritual. When the helmet had been instrumental in saving a bad accident to a worker, that worker would be "invested" into the "Turtle Club". Although a safety helmet was only issued once to a worker this changed when modern moulded plastic helmets and greater Health and Safety requirements were introduced. Helmets now are replaced bi-annually.This safety helmet is made from pressed fibres with eyelets for airflow to the head. On the base of the helmet (before the rim) are 15 metal eyelets and three quarters up are six other eyelets (3 on each side). A thick leather strap is fastened by two rivettes to the main helmet. This strap has a metal bar rivetted on to affix a "safety" lamp, for underground work (Tunneling). There are two additional metal prongs and a metal bar to secure the lamp on the rim of the front of the helmet.sec vic kiewa hydro scheme, alternate energy supplies, alpine population growth

K.G. Luke had a foundry in Queen's Parade, Melbourne which made badges and manufactured items for the Armed Forces during the First World War. He bought 40 acres of cherry orchard in Mitcham in 1952 from a Miss Cook, then went to England and attracted finance from Singer Brass Founders. The company became Luke and Singer. The three factories on site were Luke Manufacturing - stainless steel products and hospital equipment, Luke and Singer - a non-ferrous foundry producing components for industry such as nuts and cutlery, and Concentric Engineering - machinery components. Later the manufacture of refrigeration and air conditioning was added at the rear of the complex. A small aerial photograph and 2 A4 photocopies of the K.G.Luke Group of companies in 1959. The factory site is divided into three groups with Whitehorse Road situated at the bottom of the photo and Cook Road Mitcham to the left. Notes at ND6245luke manufacturing, k.g.luke group, luke and singer, concentric engineering, wheatland, vic, manufacturing industry, foundries, engineering industries

This guillotine is a hand operated machine specifically designed to cut through multiple sheets of paper or card. It has a very heavy and sharp single blade knife mounted between vertical guides or runners. The main users of a machine like this is in by the printing and publication binding industry. Book binding companies use a guillotine to evenly trim the pages of a book after it has been bound. The way the guillotine is used is - paper or card is stacked squarely on the flat table and pushed firmly against the back guide - the handle below the table at the front of the machine is wound around, which brings the back guide forward, pushing the paper stack forward and positioning the centre of the stack below the vertical frame - the upper wheel is wound around, which brings the clamp and firmly in position on top of the paper, to hold it very firmly - the large wheel on the side of the machine is turned around to lower the long sharp blade down onto the pages and cut them through. The sharp edge of the blade is protected somewhat from becoming blunt; a block of wood sits in the table under the stack of paper An early model of a guillotine was patented in 1837 by Thirault, who built a model with a fixed blade. Guillotines similar in principal to this one were patented by Guillaume Massiquot in 1844 and 1852. Over the years many improvements have been made and operation has moved from man power to electricity. Oscar Friedheim Ltd. was the importer and wholesaler of a large range of machinery and equipment for the printing and bookbinding industry. He sold most of his equipment under his own name. On this guillotine or paper cutter he refers to the origin of the guillotine’s manufacture only as “German Manufacrure”. A reference book “Commercial Bookbinding: a description of the processes and the various machines used" by Geo. Stephen, 1910, recommends Oscar Friedheim, amongst others, for the supply of “reliable cutting machines for hand or power”. It also recommends Oscar Friedheim’s for a wide range of other printing machinery and processes. OSCAR FRIEDHEIM LIMITED, LONDON Oscar Friedheim Ltd. was established in 1884 and operated from Ludgate in London. The company was an importer and wholesale supplier in the 1880’s, offering machinery and equipment for the printing and packaging industry for the UK and Ireland. The company became incorporated in 1913. An advertisement of 1913 includes a telegraphic code plus two telephone numbers for Oscar Friedheim Ltd and invites readers to call at the Ludgate, London, showrooms to see the machines working. The company later became Friedheim International Ltd. The book titled “Friedheim, A Century of Service 1884-1984 by Roy Brewer, celebrates Oscar Friedheim’s achievements. Friedheim International currently operates from Hemel Hempstead, on the northern outskirts of London UK. It promotes itself as “… the leading supplier of finishing, converting and packaging machinery to the printing, graphic arts, and highly varied packaging industries in the UK and Ireland. The company’s policy is simple – “employ the best people, work with the best equipment manufacturers in the world, and treat our customers as partners!” The company still sells guillotines. The guillotine is significant for its ability to represent aspects of the printing trade in Warrnambool and in a typical port town circa 1850 to 1910. It represents communication methods and processes used in the time before electrically powered equipment became common in industry.Guillotine (or paper cutter), hand operated. Metal framework with vertical guides, stand and metal mechanical parts including wheels and gears. Table with back guide; handle below front of table winds to move the back guide. A wheel at top of machine winds to adjust pressure of the clamp on the work on the table below it. The cutting blade fits between vertical guides; a timber insert in the table below the blade helps minimise the loss of sharpness of the blade. A handle on the side of the machine turns a large spoked wheel, which rotates a large gear, causing the blade to move up and down. Makers details are on a small oval plaque with embossed maker’s details is screwed onto main body. Maker is O Friedheim, London, and the machine is of German manufacture, circa late 1880’s.Maker’s plaque inscribed "O. FRIEDHEIM / London / German Manufacture"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, printing machinery, printer’s guillotine, paper guillotine, paper cutter machine, oscar friedheim ltd london, friedheim international ltd, bookbinding industry, printing industry

Dawn commenced operations in the Melbourne suburb of Coburg, Victoria in 1917 under the name of Dawn Manufacturing Co. It was founded by four brothers named Blake, who were all engineers. The first products manufactured were vices. After the first world war, Dawn grew considerably and was selling its products all over Australia. They were very busy during the depression with each employee working 60-80 hours a week. During the second world war, Dawn was supplying vices and clamps to the Australian Defence Department along with munitions. In 1959, the company was taken over by the G.N. Raymond Group. The Dawn catalogue was expanded to now included a wide range of engineer's vices, woodworker's vices, plumber's vices & equipment, G-clamps, quick-action clamps and toggle clamps. In 1973, Dawn was acquired by Siddons Ramset Limited. In December 1991, Dawn became a unit of the United States owned Stanley Works Pty. Ltd. In November 1998, Dawn regained its 100% Australian ownership and now as a separate strategic business unit, began to improve and expand its manufacturing and marketing operations in Australia and overseas. Drill Press, Self-feeding, belt-driven. Embossed within the casting "Dawn Melb Australia Mfg".flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, machinery, dawn drill press, drill press

Cocks Pioneer Engine c1930s. Cocks Pioneer Electric Gold & Tin Mine Company was formed in 1899. The company's first power station, located at the eastern end of the valley began operating with its 340 Kilowatt steam-powered generator. By 1909, from 2,500,000 cubic yards worked, reported recovery was 17,284 ounces of gold and 224 tons of tin ore. By 1909, Cocks Pioneer’s power plant had become inadequate and uneconomical. The barge was floated downstream about a mile, but lost time caused the operations to cease. Following testing, a new mine was established by diverting Reid's Creek at a cost of £25 000. Settling dams were built, one of which held 1,,935,900 cubic feet. Sold earth banks, built against a wall of stringy bark saplings constructed and laced with vertical props, were built. In 1914, the company was reformed as Cock’s Pioneer Gold and Tin Mines NL, another power station was constructed at the western end of the township, near the junction of Clear and Reid's Creeks. From 6,800,000 cubic yards of material processed, the returns were 64,397 ounces of gold and 855 ton of tin. Cocks Pioneer mine then moved the barge downs stream and continued sluicing. In 1929 Cocks Pioneer Electric Gold and Tin Mining Company ceased operations due to a drop in values. Cock’s Pioneer Gold and Tin Mines NL carried on large-scale hydraulic sluicing operations until 1941. mining, gold, tin, gold mining, tin mining, machinery, engines, men, cocks pioneer, el dorado, eldorado

http://vhd.heritagecouncil.vic.gov.au/places/69285 CSR Timbrock Factory Maddingley - internal remains of boilerjbd, timbrock, rowsley station, maddingley, factory, csr, jack mcconnell, heritage, industry, industrial, machinery

In 1992 Shire of Eltham Historical Society member and Kangaroo Ground resident, Bruce Ness became aware that the old school teacher residence at Kangaroo Ground School was no longer being used. Over the years Bruce had been storing a growing collection of the Society's artifacts and objects including various machinery and farm tools. He proposed that this might present an opportunity to set up a museum with the Society's objects. It was proposed that a board be appointed containing representatives of the Society, the School Council, Shire of Eltham and "Friends of the Andrew Ross Museum." As a consequence, most of the Society's objects were transferred to the museum and the Society became more focused on documents, maps and photographs, etc.Roll of 35mm colour negative film, 3 stripsFuji 100shire of eltham historical society

In 1992 Shire of Eltham Historical Society member and Kangaroo Ground resident, Bruce Ness became aware that the old school teacher residence at Kangaroo Ground School was no longer being used. Over the years Bruce had been storing a growing collection of the Society's artifacts and objects including various machinery and farm tools. He proposed that this might present an opportunity to set up a museum with the Society's objects. It was proposed that a board be appointed containing representatives of the Society, the School Council, Shire of Eltham and "Friends of the Andrew Ross Museum." As a consequence, most of the Society's objects were transferred to the museum and the Society became more focused on documents, maps and photographs, etc.Roll of 35mm colour negative film, 3 stripsFuji 100shire of eltham historical society