Pamela Irving (born 1960) is a prominent Australian visual artist specialising in bronze, ceramic and mosaic sculptures as well as printmaking and copper etchings. Irving's early art was influenced by artists including Arthur Boyd, John Brack, Noel Connihan, Mirka Mora, Sidney Nolan and John Perceval. In recent years, Irving has been influenced ″by the honest and direct expressiveness of ‘outsider art’ (the art of self-taught or ‘naive artists’) and the craft of ‘memoryware’″ Significantly, this interest grew following Irving's visit to Nek Chand's Rock Garden in Chandigarh, India.Green Wedge Larry - dog sculpture reminiscent of the iconic Larry LaTrobe located at Melbourne City Square. The dog is constructed from Italian Bisazza glass tiles, using a Mapei adhesive system. The theme for his 'coat' is the flora from the local surrounds of Nillumbik, drawing from the 'Live Local Plant Local' Nillumbik plant directory.green wedge, larry, dog, sculpture, mosaic, indigenous flora, irving

A saw is a tool consisting of a tough blade, wire, or chain with a hard-toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power sources. An abrasive saw has a powered circular blade designed to cut through metal or ceramic. In ancient Egypt, open (unframed) saws made of copper are documented as early as the Early Dynastic Period, circa 3,100–2,686 BC. Many copper saws were found in tombs dating to the 31st century BC. Models of saws have been found in many contexts throughout Egyptian history. As the saw developed, teeth were raked to cut only on the pull stroke and set with the teeth projecting only on one side, rather than in the modern fashion with an alternating set. Saws were also made of bronze and later iron. In the Iron Age, frame saws were developed holding the thin blades in tension. The earliest known sawmill is the Roman Hierapolis sawmill from the third century AD used for cutting stone.The subject item is believed to date from around the mid to late 20th century and is regarded as a modern item. The maker is unknown but the pattern or design and type of wood used indicate it is a tool of modern manufacture. Compass saw blade with wooden handle attached with wingnut.Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wood cutting, wood saw, cross cut saw, cabinet makers tools, wood working tools, tool

A saw is a tool consisting of a tough blade, wire, or chain with a hard-toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power sources. An abrasive saw has a powered circular blade designed to cut through metal or ceramic. In ancient Egypt, open (unframed) saws made of copper are documented as early as the Early Dynastic Period, circa 3,100–2,686 BC. Many copper saws were found in tombs dating to the 31st century BC. Models of saws have been found in many contexts throughout Egyptian history. As the saw developed, teeth were raked to cut only on the pull stroke and set with the teeth projecting only on one side, rather than in the modern fashion with an alternating set. Saws were also made of bronze and later iron. In the Iron Age, frame saws were developed holding the thin blades in tension. The earliest known sawmill is the Roman Hierapolis sawmill from the third century AD used for cutting stone.The subject item is believed to date from around the mid to late 20th century and is regarded as a modern item. The maker is unknown but the pattern or design and type of wood used indicate it is a tool of modern manufacture.Compass saw with wooden handle and metal blade. Small teeth. flagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wood cutting, wood saw, cross cut saw, cabinet makers tools, wood working tools, tool, compass saw

A saw is a tool consisting of a tough blade, wire, or chain with a hard-toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power sources. An abrasive saw has a powered circular blade designed to cut through metal or ceramic. In ancient Egypt, open (unframed) saws made of copper are documented as early as the Early Dynastic Period, circa 3,100–2,686 BC. Many copper saws were found in tombs dating to the 31st century BC. Models of saws have been found in many contexts throughout Egyptian history. As the saw developed, teeth were raked to cut only on the pull stroke and set with the teeth projecting only on one side, rather than in the modern fashion with an alternating set. Saws were also made of bronze and later iron. In the Iron Age, frame saws were developed holding the thin blades in tension. The earliest known sawmill is the Roman Hierapolis sawmill from the third century AD used for cutting stone.The subject item is believed to date from around the mid to late 20th century and is regarded as a modern item. The maker is unknown but the pattern or design and type of wood used indicate it is a tool of modern manufacture. Compass saw with wooden handle broken and metal blade. Small teeth.Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wood cutting, wood saw, cross cut saw, cabinet makers tools, wood working tools, tool, compass saw

A saw is a tool consisting of a tough blade, wire, or chain with a hard-toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power sources. An abrasive saw has a powered circular blade designed to cut through metal or ceramic. In ancient Egypt, open (unframed) saws made of copper are documented as early as the Early Dynastic Period, circa 3,100–2,686 BC. Many copper saws were found in tombs dating to the 31st century BC. Models of saws have been found in many contexts throughout Egyptian history. As the saw developed, teeth were raked to cut only on the pull stroke and set with the teeth projecting only on one side, rather than in the modern fashion with an alternating set. Saws were also made of bronze and later iron. In the Iron Age, frame saws were developed holding the thin blades in tension. The earliest known sawmill is the Roman Hierapolis sawmill from the third century AD used for cutting stone. The subject item at this time cannot be associated with an historical event, person or place, provenance is unknown, as the maker is unknown but the pattern or design and type of wood used indicate it is a tool of modern manufacture around the mid to late 20th century.Wood hand saw with wooden handle attached to saw by 4 rivets. No blade markings Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, handsaw, wood saw, carpenders tools, cabinet makers tools, wood cutting

A saw is a tool consisting of a tough blade, wire, or chain with a hard-toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power sources. An abrasive saw has a powered circular blade designed to cut through metal or ceramic. In ancient Egypt, open (unframed) saws made of copper are documented as early as the Early Dynastic Period, circa 3,100–2,686 BC. Many copper saws were found in tombs dating to the 31st century BC. Models of saws have been found in many contexts throughout Egyptian history. As the saw developed, teeth were raked to cut only on the pull stroke and set with the teeth projecting only on one side, rather than in the modern fashion with an alternating set. Saws were also made of bronze and later iron. In the Iron Age, frame saws were developed holding the thin blades in tension. The earliest known sawmill is the Roman Hierapolis sawmill from the third century AD used for cutting stone.The subject item is believed to date from around the mid to late 20th century and is regarded as a modern item. The maker is unknown but the pattern or design and type of wood used indicate it is a tool of modern manufacture. Compass saw blade with wooden with open handle blade attached with wingnut lever at side to adjust long narrow blade Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wood cutting, wood saw, cross cut saw, cabinet makers tools, wood working tools, tool

WW2 Royal Australian Air Force. Also see statement of Signifiance.Example of WW2 Officers Tunic, this example has a Kings Crown on the sleeve which denotes that the tunic could have been worn as late as 1953, after 1953 it would have been a Queens crown. Crown and eagle denotes Air-Crew. Tunic material can determine which country the tunic came from, Dark Blue- Australia, Light Blue-England, in between, South Africa, Canada and New Zealand.RAAF Officers Tunic, Flying Officer, Dark Blue Wool Serge, with four pockets, inside lining is of black cotton, sleeve lining is of striped sleeve lining material. Five Red Year Shevrons on lower right sleeve, with waist belt with black bakalite buckle held in place by two buttons. Four eyelets to end of waist belt.On lower sleves Crown and Eagle in blackened copper with blue and white rank lace. Number of buttons in correct position (8). Lable in coller MTX Size 8 overwritten in black CRA.On coller lable which says MTX Size Eight, overwritten in black CRA.raaf, officers uniform

Two patterns of clasp knife were supplied to the Australian Military Forces in the WW2 era by the Carr Fastener Company. These clasp knives were identical to those made by Whittingslowe Engineers that were made in the Whittingslowe factory under contract to Carr Fasteners. William Whittingslowe had a close association with Carr Fasteners prior to WW2 and had been Chairman of Carr Fasteners for some time.Smaller sized canoe shaped body military steel clasp knife. The clasp knife is the Carr Fast second pattern with the improved tin opener, manufactured in Australia in the World War Two era. The clasp knife has a blade, a tin/bottle opener, a marline spike as well as a screw driver and a copper wire shackle used to attach the knife to a lanyard or belt clip. The body of the knife is held together by steel rivets. Indentations to aid opening are located on the top RHS of the blade, and on the top LHS of the tin opener. The end of the tin opener is shaped to a point.CARR FAST CO AUST D (broad arrow pattern) Dclasp knife, world war two, australian military forces, steel

The artefact is a short cross-section of part of a functional part of a brass fitting that suspended a gas lamp, providing structural support, and internally, supplying the gas for its ignition. It combines elegant design with the elements required for safe and efficient delivery of gas. It was recovered from the LOCH ARD shipwreck site. There are similar artefacts in the Flagstaff Hill collection. The LOCH ARD left Gravesend (London) on 2 March 1878, bound for Melbourne, with a crew of 37, 17 passengers, and a diverse and valuable cargo of manufactured goods, luxury items, and refined metal. Some of the cargo was intended for Melbourne’s first International Exhibition to be held in 1880. At 3 am, 1 June 1878, the ship was wrecked against the high limestone cliffs of Mutton Bird Island on Victoria’s south west coast near Port Campbell. Only two people survived the disaster — Tom Pearce, a male crew member, and Eva Carmichael, a female passenger. The cargo proved too difficult to salvage in the vessel’s exposed condition and was largely written off. The manifest of goods in the LOCH ARD’s holds included “Fittings gas (4 cases)”. The gas lighting of streets, public buildings, and the dwellings of wealthier private citizens, was already well advanced in the cities and major towns of the Australian colonies. In 1841 Sydney was the first to be gas lit with 23 street lamps, 106 hotel lamps, and 200 private residences connected to the Darlinghurst “gasometer” by an underground network of metal pipes. “The dim days of oil and tallow are gone by!” pronounced one newspaper, flushed with civic pride. The 1850s Gold Rush promoted a similar attitude of confidence and affluence in the Colony of Victoria. In 1855 Melbourne was connected to its own system of subterranean gas pipes despite the same high rates of 25 shillings per 1000 cubic feet being charged, (reduced to 15 shillings in 1865 with cheaper sources of coal). By1858 Kyneton had its own gasworks to light the town (fuelled by eucalyptus leaves) and Geelong followed suit in 1860. Had the LOCH ARD reached its intended destination in 1878, it is probable that the 4 cases of brass gas light fittings on board would have found a ready market.The gas fitting is significant for its association with the LOCH ARD shipwreck, which is of State significance and is listed on the Victorian Heritage Register S417. The fitting is an example of a late 19th-century plumbing and light fitting.A pressed brass gas light fitting, recovered from the wreck of the LOCH ARD. The elegant and functional fitting extends from an ornate 8cm diameter ceiling flange, and comprises two short lengths of fluted column pipe with a brass joiner that are severed (cut off) at the end. Within this decorative outer layer of 3cm diameter is a full length brass tube liner, which is in turn protecting a narrow 0.75cm copper gas pipe that also runs full length. The artefact is generally unrestored with reddish/cream sandstone concretion, but is in good condition.warrnambool, shipwreck coast, flagstaff hill, shipwrecked coast, flagstaff hill maritime village, flagstaff hill maritime museum, shipwreck artefact, maritime museum, gas lamps, gas lighting, gas works, brass fittings, gas pipes, loch ard, 1878 shipwreck, victorian affluence, colonial gas lighting

Conditions of sale by private contract dated 3rd April, 1945 between Mrs. E. M. Bradford (vendor) and E. J. Stirton (purchaser). Property: land situate no. 325 Barnard Street, Bendigo at present occupied by Mrs. Knight as tenant, being Crown allotment 12A section 49B Parish of Sandhurst City of Bendigo being land described in Crown grant volume 2580 folio 515907, together with 4 room weatherboard dwelling and all sundry outbuildings. Also copper, troughs bath and electric light fittings. Price: 220 pounds.organization, business, h.a. & s.r wilkinson real estate

Contract of sale of land dated 7th April 1955 between Mr. G.B. & Mrs. N. M. Seddon (vendor) and Mrs. May Phillips (purchaser). Property: land being part of allotment 4 section 85C being land described in certificates of title volume 2915 olio 817 and volume 2618 folio 510 and situate No. 12 Phillips Street, Bendigo together with weatherboard dwelling and all sundry, also all linos, blinds, curtains, electric light fittings and shades, electric stovette and electric copper. Price: 1,750 pounds.organization, business, h.a. & s.r wilkinson real estate

Pittock collection: four carpenter/painter's tools * rusted putty knife, 260mm L x 32 mm W * white painted putty knife, 210 mm L x 25 mm W * red handled spatula, rusted blade, marked A ?eg Steel product, 195 mm L x 25 mm W * steel scraping tool with wooden handle, copper sleeve joint, 150 mm L x 100 mm W Items stored in Pittock coach builder's box, reference 13000.1.

Yields information about the removal of the overhead in Lydiard St North, following the closure of the SEC operated tram system in Sept. 1971Set of two colour digital images taken by W. J. Llewelyn of the removal and cutting up of the overhead and cutting the copper trolley wire in Lydiard St North - Oct. 1971? Shows the method and equipment used. Has a van marked "Arch Smallgoods" in Lydiard St North. Shows the Mair St traffic light, and Railway Hotel on the corner. In the background is the George Hotel, St Paul's Technical College, and Union Fidelity Trustee Company buildings in the background. Warren Doubleday remembers being there at the time, but can't find a photograph of it and date.trams, tramways, lydiard st, closure, secv, overhead, demolition

Worn piece of old trolley wire (330mm long) of 89mm2 (?) cad copper wire. Taken from an old wire joiner within depot to be used as a sample of worn wire for use in ceremony of new trolley wire hand over on 26/11/96, when Victorian Minister of Transport, Alan Brown handed over new Trolley wire (2km) to Museum. Not known where made - could be either UK or Australia. Images added 3-12-2016 See The Courier, p6, 27/11/1996, see Reg. Item No. 503.trolley wire, btm

The Civil Air Patrol is the official USAF auxiliary. Formed during WW 2, it is currently tasked with search and rescue, communications, civil defense and aerospace education (via the CAP Cadet program) The Civil Air Patrol, while formed in WW2, became the auxiliary of the USAF when the air force was formed as a separate service in 1947. The uniform is based on the USAF uniform with distinguishing CAP insignia and badges. It is unusual to find CAP items in collections.Blue-grey wool serge USAF peaked hat with black patent leather peak (with light grey underside). Black leather chin strap secured by two 16 mm diameter metal buttons embossed with the USAF insignia. Dark blue hat band. Mid grey head band and light tan lining. Maunufacturer's label stapled and sewn to head band. Metal tab support for front of crown and metal strip reinforcement to edge of crown. Civil Air Patrol pressed copper alloy cap badge incompletely attached to hat. Manufacturer's Label - "100% ALL WOOL. EXCLUSIVE OF ORNAMENTATION. MFG WPL. No. 9379. 7 1/8. headgear

Copper coloured medallion. Around outside of medallion: ' Presented as a permanent memento Hotham Permanent Building Society' On obverse: 'Sir Charles Hothem K.C.B Appointed Lieutenant Governor of Victoria 1853' ' Landed in Melbourne June 22nd, 1854, Appointed Capt. General Governor in Chief. Medal is mounted on burgundy velvet inside a black jewelry box. Inside on back of lid printed on a gold metal background ' Donated by Dale O'Sullivan on 11.11.2014. Medallion Links Governor Hotham & George Lansell to Victoria's First Government House and its Sub Div of Toorak, by Lansell'numismatics, medals - civil, sir charles hotham

A coin that was issued by a Melbourne Marine store. Description by the Museums Victoria website. "Copper Halfpenny Token, minted by Heaton & Sons of Birmingham, circa 1861. Issued by Robert Hyde & Co, Marine Store, Melbourne. Hyde's Marine Store was listed in a Melbourne directory for the first time in 1862. Between 1863 and 1865 he was listed as being in a partnership with Richard Hodgson (Hyde, Hodgson & Co.). In 1868 his Marine Store became a Rag Merchant's business, before becoming a Marine Store for 1869 and 1870. The firm's principal business was dealing in second hand and scrap goods. Physical Description A round copper token (28 mm diameter) giving the name address and business of the issuer: Robert Hyde & Co. Melbourne. General Marine Store. On the reverse a coat of arms consisting of a central shield below a Rising Sun supported by an emu at left and kangaroo at right all resting on a ribbon with the motto ADVANCE AUSTRALIA. The shield is quartered and contains: upper left - a golden fleece; upper right - a three-masted sailing ship; lower left - a bull standing facing left; lower right an anchor. Around above, PEACE & PLENTY; below, the date of issue, 1861."bendigo, gold mining, qc binks, qc binks, robert hyde, marine store.

Reckitt & Sons' opened a branch in Sydney in1886. Brasso was developed by Reckitt & Sons in 1905. In 1938 Reckitt and Sons merged with J. and J. Colman to become Reckitt and Colman Ltd.Brasso was used by most Housewives for cleaning and polishing Kitchen Equipment in the City of Moorabbin during 20thC Metal container with blue sun burst effect, with a red circle with 'BRASSO' printed, in white and blue, inside. The instructions are printed on the back. FRONT: 'BRASSO' Back: Picture of the Royal Coat of Arms - By appointment to Her Majesty Queen ElizabethII. Suppliers of Metal Polish Reckitt & Colman Ltd. BRASSO Metal Polish for polishing Brass, Copper, Zinc, Steel, Pewter etc. SHAKE WELL Apply with a soft cloth. Polish off with a dry, soft cloth preferably before the polish has completely dried. DO NOT PLACE THIS TIN CLOSE TO THE FIRE Made in Australia by Reckitt & Colman (Australia) Ltd. No. 6 - Contents 6½ Fl oz when packed. brasso, metal polish

The pessary was originally regarded as an instrument and made from cork, ivory, hard rubber or gum-elastic. In later times, they were made from black vulcanite, flexible tin, soft copper wire covered with Indian rubber, and celluloid. The form of the pessary was and still is variable -either round, oval, or moulded in some cases combining three or four curves depending on the size of the pessary. In ancient times, medicated pessaries were made from emollient. astringent and aperient. Several of these are still used, but in more modem times are called vaginal suppositories. Anal suppositories are still used to suppress the pain of haemorrhoids.Pessary, Thomas style, made of black vulcanite. Inscribed with number "60". intrauterine device, pessary

The pessary was originally regarded as an instrument and made from cork, ivory, hard rubber or gum-elastic. In later times, they were made from black vulcanite, flexible tin, soft copper wire covered with Indian rubber, and celluloid. The form of the pessary was and still is variable -either round, oval, or moulded in some cases combining three or four curves depending on the size of the pessary. In ancient times, medicated pessaries were made from emollient. astringent and aperient. Several of these are still used, but in more modem times are called vaginal suppositories. Anal suppositories are still used to suppress the pain of haemorrhoids.Moulded black vulcanite pessary. Pessary is irregular in shape. Size small.pessary, intrauterine device

The pessary was originally regarded as an instrument and made from cork, ivory, hard rubber or gum-elastic. In later times, they were made from black vulcanite, flexible tin, soft copper wire covered with Indian rubber, and celluloid. The form of the pessary was and still is variable -either round, oval, or moulded in some cases combining three or four curves depending on the size of the pessary. In ancient times, medicated pessaries were made from emollient. astringent and aperient. Several of these are still used, but in more modem times are called vaginal suppositories. Anal suppositories are still used to suppress the pain of haemorrhoids.Moulded black vulcanite pessary. Pessary is irregular in shape, and in the "eyeglass" stem style.pessary, intrauterine device

St George's Church of England, Mont Albert was built in 1886 and from 1904 until 1907 was known as Holy Trinity, Surrey Hills. As the population increased there was a need for a church in Surrey Hills. This brick church was consecrated in 1922 and replaced the earlier one built in 1907 on the adjacent site in Union Road. After construction of the brick church, the earlier one became a Sunday School. The copper spire was added in 1926, which dates this photo as post-1926. Norman Carter took many photos of Surrey Hills and Mont Albert in the 1920s; many were associated with events and activities of the Church of England.Black and white photo of the 'newly' constructed brick Holy Trinity Church in Union Road, Surrey Hills taken from near the south-west corner of Guildford Road. Further up the hill is the earlier church. Both buildings are bounded by a simple post and rail fence. Immature street trees are planted on both sides of Union Road.churches, holy trinity church, anglican church, sunday schools, norman carter

Hugh Jeffrey attended the Melbourne Conservatorium of Music at Melbourne University, graduating in 1940. This examination pin was given to him in September 1934. It is a copper badge with its frame shaped like a shield. Inset into the shield is an Australian coat-of-arms granted by King George V, with a white and blue torse supported by a kangaroo and emu on a grassy field. It features the Commonwealth Star on top, and the motto "Advance Australia" underneath. It is engraved with "Hugh Jeffrey" acoss the top, with "University Exam" on the left of the outlying shield, and "Sept. 1934" on the right. It features a loop on the top with a short fine chain and safety pin. Shield with Australian coat of arms and engraved writingAdvance Australia Hugh Jeffrey University Exam Sept. 1934hugh jeffrey, badges

These reading glasses plus the two additional replacement lenses were highly fashionable in the late 1800's and early 1900's due to their light frames ie. wire. They are of light material and are not as obtrusive, or heavy, as horn rimmed reading glasses.This minimisation of the eye wear was to allow the facial features to be presented without any obstructing eye wear, "au naturel". The "light weight" wire connections to nose and ears was to minimise weight upon those physical areas. It was an eye piece preferred by accountants and all forms of "book worms". This was a period when the "written word" was at its peak. This was well before the light enhanced computer screen and at an age where the "written word" was in the majority as compared to the typed word. These reading glasses are very significant to the Kiewa Valley as they provide additional material which supports the "isolational factors" which were prevalent in the 1800's and early 1900's. Poor lighting and lack of available optical technicians in rural areas, required those suffering with eye troubles in these rural areas to go to Melbourne. An advertisement placed by H B Bissel "eyesight specialist" in the "Independent" Newspaper in 1915 on page 3 " Every person's eyes are liable to be affected by some little weakness or other and these weaknesses, if not corrected at once, are apt to assume a most serious aspect as time goes on". This type of advertisement is putting "the fear of God" on those with slight eyesight problems. It also does not factor the poor lighting used by most in rural areas at this point in time. By the mid to late 1950's, electricity in the Kiewa Valley was available to all households and improved lighting helped nighttime readers. These reading glasses, made in Melbourne, highlight the fact that the Kiewa Valley and its region were still reliant on Melbourne based "specialists" and travel to and from these highly professional health practitioners not only involved a long, and time consuming journey, but also an expensive one.The frames of this oval wire reading glasses is made from gold plated copper wire. There are three nose bridges each with a slightly different angle and shape, each has a different magnification. This may suggest that they were in use at different developmental periods during the wearers ages. Each of the three lenses were fixed onto the frame by a screw and fastened directly onto the glass. Two of the glasses have nose "guides/rests" and one without.. The fine wire ear "loops" has a small "ball" feature at its end (to stop the glasses from slipping off the face).personal effects, spectacles, eye fashion, reading glasses

Standard Australian Army servicemans metal pocket knife with three folding implements. It has a single edge knife blade, a can and bottle opener and a marlin spike all hinged to fold away into the knife body. One end of the knife is equipped with a screwdriver blade stub. The other end is equipped with a pivoting copper suspension loop. The body of the knife is stamped with the manufacturer's details, which includes a description of the style of knife as an 'opener', patent number '15737' and a 'D^D' stamp. This knife is wrapped in a waxed piece of paper printed with the instructions for using the can opener blade.The body of the knife is stamped with the following inscription "WITTINGSLOWE, OPENER, ADELAIDE, PAT.APPLN 15737" and a 'D^D' stamp.vietnam, australian, army, pocket knife, opener