Showing 1575 items matching "off road"
-
Dutch Australian Heritage Centre Victoria
Coffee pot set (Koffie servies)
(a) - (w) - A tall, off white, ceramic pot with matching sugar bowl, milk jug, and eight cups and saucers. Two scenes, Westertoren and Montelbaanstoren are found on the sides of the body of the coffee pot. Scenes of Amsterdam are also seen on the other items. Two plates for serving biscuits or cakes both also with Amsterdam scenes complete the set. The edges of these are curved slightly upwards.Item 5140(v) has the words "Nieuwmarket met Waag" (Newmarket with Weighing House); the inscription on 5140(w) reads: "Waterlooplein", (Waterloo Square). On the bottom of some items the words "Viller and Bosch" appear. -
National Vietnam Veterans Museum (NVVM)
Book, Kline, David, Sacred Ground
We have all viewed on TV or in newspapers, books and magazines, the wreckage of war...a burned-out tank or APC along a red dusty road, a shop-up helicopter, its blades askew. resting in a rice paddy; spent shell casings; bloody drssings; battle gear; or mangled bodies lying in sore far off outpost after a fierce battle.We have all viewed on TV or in newspapers, books and magazines, the wreckage of war...a burned-out tank or APC along a red dusty road, a shop-up helicopter, its blades askew. resting in a rice paddy; spent shell casings; bloody drssings; battle gear; or mangled bodies lying in sore far off outpost after a fierce battle.vietnam veterans memorial (washington. dc) - pictorial works, war memorials - united states -
Wannon Water
3" Scour valve mould, Valve mould
Used in the manufacture of spare parts for the Otway Water supply pipeline in the 1980s. Used in conjunction with scour valve mould, valve stem mould and high pressure scour valve mould (casting) watermains Used to manufacture spare parts in the 1980swooden casting mould3" Scour Valve in silver raised lettering WF Logo in silver and raise In black texta - DEMAC 4 off C.I.otway region, pipeline, water supply -
Benalla Art Gallery
Watercolour, Nicholas CHEVALIER, Pontina, Funchal Bay, Madeira, Not dated
Born: St Petersurg, Russia 1828; Arrived: Melbourne, Victoria, Australia 1854; Lived and worked: Switzerland 1845-1848, Germany 1851-1854, Australia 1854-1865, New Zealand 1865-1866, England 1870-1902; Died: London, Middlesex, England 1902VictorianLedger Gift, 1988Watercolour depicting a walled city at the foothills of the Madeira mountains. Gold brushed timber frame with off white window mountRecto: Signed "N.Chevalier." in grey watercolour in l.r.c of composition; Not dated; Not titledwatercolour, streetscape, buildings, animals, mountains, roads, river, structures, castle -
St Kilda Historical Society
Photograph, Donald McDonald, Yanakie St Kilda, 1872
Built for William Wilmot Couche (1829-1890) probably in 1869. The architect was Lloyd Tayler (1830-1900) and it was designed in the polychromatic Lombardic style that had been introduced to Melbourne by the architect Joseph Reed (1822-1890). Couch was a prominent merchant and businessman. He founded the firm Couch Calder & Co, was director of several insurance companies and a member of the Melbourne Harbour Trust for many years. From about 1900 the house was renamed Wavenhoe. In the 1920s Wavenoe Avenue was constructed through its gardens and most of the land sold off including the blocks at the corner of Hotham Street and Alma Road. The house still stands opposite St Kilda cemetery.black and white photograph copy -
Puffing Billy Railway
Phoenix Foundry Plate
Phoenix Foundry Plate - replica Made about 2010 cast off original from locomotive Y112 The Phoenix Foundry (1857-1906) fabricated iron and brass products - including engines and pumping gear for the mining industry, locomotives, steam rollers, water pipes, water gauges and diverse small items. Throughout its operation the business was located at premises on Armstrong Street, Ballarat . Background In 1852, at the age of thirty-three and after a year of operating his own engineering business at Williamstown, Lancashire-born blacksmith and engineer George Threlfall (1819-1897) arrived on the Sebastopol gold plain and immediately undertook blacksmith work repairing picks and tools for the miners. Little did he know that this fledgling business would be the genesis of the most iconic business of nineteenth-century Ballarat. At approximately thirty-nine years of age, English mechanical engineer Richard Carter (c1814-1883) came to Australia on board the Arrogant - arriving in Melbourne on 19 April 1853. He soon travelled to the Ballarat goldfields. Born in the year 1830 in Belfast (Ireland), mechanical engineer William Henry Shaw (1830-1896) arrived in Australia in October 1853. He worked briefly with George Threlfall at Sebastopol, then moved to Geelong to manage the small foundry of Frederick Moore. Twenty-four year old English-born iron moulder Robert Holden (c1831-?) left his home in Belfast (Ireland) in late 1854 and travelled from Liverpool to Melbourne on board the James Baines - arriving in February 1855. Afterwards he joined his brother-in-law William Henry Shaw in Ballarat. History Foundation to Incorporation In March 1857 George Threlfall joined in business with Richard Carter, William Henry Shaw and Robert Holden. They relocated Threlfall's successful engineering enterprise from Sebastopol to new premises in Armstrong Street, Ballarat. This business was then known variously as the Phoenix Iron Works Company, Phoenix Foundry or Messrs Carter and Co. By 15 April 1857 they were advertising that they were open for business as engineers, millwrights, boiler makers, smiths, iron founders and brass founders. In January 1858 George Threlfall left the partnership. Incorporation to 1889 1890 to Closing locomotive Y112 Builder: Phoenix Foundry, Ballarat Builder’s Number & Year: 238 of 1889 Designer: Kitson & Co Wheel Arrangement: 0-6-0 No. in class: 31 Entered Service: 24 July 1889 Taken off Register: 11 May 1961 The origins of the Victorian Railways Y-class lay with the decision by Kitson & Co, Leeds to place a 0-6-0 freight locomotive on display at the Centennial International Exhibition, Melbourne in 1888, together with a 2-4-2T suburban passenger locomotive. This marketing initiative proved successful as the Victorian Railways were clearly impressed with these machines, with both purchased after the exhibition and becoming the patterns for new standard locomotive types. Thirty examples of the 0-6-0 heavy freight design were ordered from the Phoenix Foundry, Ballarat, becoming the Y-class for main line heavy freight duties, while the 2-4-2T design became the E-class for Melbourne suburban passenger duties (represented by preserved locomotive E 236). The Y-class prove successful in service and accrued high mileages. They were inevitably superseded by more modern and powerful steam locomotives and a number cascaded into shunting and yard pilot duties, often with the addition of shunters steps along both locomotive and tender. Y 112 was one of the last in service when withdrawn in 1961. Fortunately it was saved for preservation and plinthed in central Ballarat, ostensibly in commemoration of Phoenix Foundry. I understand it is owned by the Sovereign Hill Museums Association. During the 1980’s, Y 112 was leased to Steamrail Victoria and restored to operation at an industrial site in Ballarat. Y 112 features an attractive lined apple green livery and has performed various rail tours around Victoria since restoration. It is normally based at the Steamrail depot in Ballarat East. Y 112 is the only 19th century design in operational condition in Victoria and as such is one of the oldest working steam locomotive in Victoria . Historic - Phoenix Foundry Plate - replica Made about 2010 cast off original from locomotive Y112Phoenix Foundry Plate Oval shaped plate with an image of a phoenix centered at the top with lettering surrounding it.Phoenix Foundry No 238 Ballarat Company Limited 1889.puffing billy, phoenix foundry, ballarat, locomotive y112, phoenix foundry plate - replica -
Puffing Billy Railway
Emerald Station Sign
Station Sign - Emerald Emerald Station is situated on the Puffing Billy Railway in Victoria, Australia. It was opened with the Railway on 18 December 1900 and comprised a platform track and a loop siding. A passing loop was added between the two a few years later. There was also a spur siding off the Down end of No. 3 Road. Two standard 12 ft by 20 ft timber portable station buildings with a Van Goods Shed between (all adjoining) were provided on the platform and a Goods Shed on the No. 3 Road loop siding. Other buildings included Tea Rooms, lamp room and toilets along with a cattle race and loading bank. The station building was later reduced in length by one of the portables which housed the General and Ladies' waiting rooms. Emerald today remains very similar to the early days, but has had other Roads added into a Carriage Workshops, a turntable and storage sidings. Also, a Signal and Telegraph Branch depot in the form of a large Goods Shed and a multi-purpose yard building in the form of a Locomotive Depot administration building have been added. During 2009, the station building underwent stage one of an internal restoration to its former glory. ref: https://en.wikipedia.org/wiki/Emerald_railway_station,_Victoria photos at http://www.vicrailstations.com/Gembrook/Emerald/Emerald.html Historic - Victorian Railways Station sign used at Emerald Station Station Sign - Emerald Metal rectangle Station Name Sign with white enamel back ground and black lettersEmeraldstation sign, puffing billy, emerald station -
Puffing Billy Railway
Ganger's, Trolly Turntable
Ganger's Trolly Turntable When a railway gangers trolly was working between railway stations, occasionally it was required for the line to be clear for trains to operate. Many trollys were too heavy to physically lift off the track, so a turntable was needed. These were provided at designated locations, and in some cases the trolly had a turntable on board. The turntable would be placed on the rails and the trolley driven onto it. The turntable would then be rotated 90 degrees by human power and the trolley pushed off on to a prepared set of rails on the side of the line. The turntable would then be removed from the track allowing trains to run through that section. The gang could then get on with the work required near that location. Historic - Railway Permanent Way and Works - track equipment - Ganger's Trolly TurntableGanger's Trolly Turntable made of wood with wrought iron fittings puffing billy, ganger's trolley turntable, trolley, trolly -
Puffing Billy Railway
Guards Hand Lamp - Harvey, Shaw & Drake 1913 Tri Colour, 1913
Guards Hand Lamp - Tri Colour Harvey, Shaw & Drake 1913 Gills Alley is located between Queen and Elizabeth streets, extending north to a dead-end from Little Collins Street. In 1895, Gills Alley extended through from Little Collins Street to Bourke Street. The Saracen's Head Hotel was located on the corner of Gills Alley and Bourke Street. By 1920, however, the north end of the lane had been closed off, leaving the sole entrance to the lane on Little Collins Street. Gills Alley was at this time the location of several warehouses, showrooms and factories belonging to the Harvey, Shaw and Drake Company.Guards Hand Lamp - Tri Colour Harvey, Shaw & Drake 1913 used by the victorian railwaysTri Colour Harvey, Shaw & Drake 1913 guards hand lamp Made of Metal , brass and glassTri Colour Harvey, Shaw & Drake 1913 puffing billy, guards hand lamp, harvey, shaw and drake company, tinsmith -
Puffing Billy Railway
Large Gangers, Trolly Turntable
Large Gangers Trolly Turntable Many trollys were too heavy to physically lift off the track, so a turntable was needed. A railway gangers trolly was required to be "off tracked" at its working location, so that it would be clear for trains to operate. A special track at right angles to the running line was usually provided. When all the work was completed and after all the trains had cleared, the trolly was then "on tracked" so that it could proceed to its next location. These turntables were also in use at the Works Depot location. They were provided at designated locations, and in some cases the trolly carried a turntable on board. To allow for more than one trolly to be taken off the line, a longer version was available for use. The turntable would be placed on the rails and the trolly driven onto it. The turntable would then be rotated 90 degrees by human power and the trolly pushed off on to a prepared set of rails on the side of the line. The turntable would then be removed from the track allowing trains to run through that section. The gang could then get on with the work required near that location.Historic - Railway Permanent Way and Works - track equipment - Ganger's Trolley TurntableLarge Gangers Trolly Turntable made of wood with wrought iron fittingspuffing billy, gangers trolley turntable, trolly, trolley -
Puffing Billy Railway
Fire Beater, Ganger's
Ganger's Fire Beater This was used to beat the flames of a fire. They were used by track Gangers when burning off the trackside vegetation, to ensure the fires were kept under control. the canvis was dampened with water before useHistoric - Railways Permanent Way and Works - track equipment - Ganger's Fire Fighting Mop Ganger's Fire Beater made of timber handle with canvas strips attached puffing billy, fire beater -
Puffing Billy Railway
14 NUU - Louvred Truck, 15/ 7/1911
Van 14 NUU - Louvred Truck (11) Untrafficable - Belgrave Station Yard VR Service History 15/ 7/1911 NWS Built new Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 7 tons Capacity 10 tons Built 1898 - 1911 Number Built 14 In use 5 To be restored None *NUU 14.VA - 15/ 7/1911 NWS Built new - / /1926 - To NU 14.VA - NU 14.VA - circa 1926 - Modified AC Malco 1/10/1977 - Off Register To E.T.R.B. RS77/4223 Puffing Billy Service History or Notes Historic - Victorian Railways Narrow Gauge - Rolling Stock - Louvered VanWooden Louvered Van - Made of Timber on a Wrought iron frame14 NUpuffing billy, 14 nuu, louvered van, victorian railways, 2'6" guage, narrow gauge rolling stock -
Puffing Billy Railway
3 NUU - Louvred Truck, 3/12/1900
Van 3 NUU - Louvred Truck (11) VR Service History 3/12/1900 NWS Built new Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 7 tons Capacity 10 tons Built 1898 - 1911 Number Built 14 In use 5 To be restored None *NUU 3.VA - 3/12/1900 NWS Built new - / /1926 - To NU 3.VA - NU 3.VA - circa 1926 - Modified AC Malco 1/10/1977 - Off Register To ETRB Sec76/3630 RS77/4223 NUU The standard louvre van design for the Victorian narrow-gauge lines, the NUU vehicles were constructed in three batches; the first seven from 1899 to 1901, an eighth in 1906 and the last six in 1911, for a total class of fourteen. They looked very similar to the U vans of the Broad Gauge, although two photographs[1][2] of NUU 1 show that its body may have been white for some time. NU In 1926 the class was relettered to simply NU, with no changes to numbers. NU 4 was scrapped in 1938, but otherwise the class remained intact until 1954, when seven members (2, 5, 7, 8, 9, 11 and 12) were sold to Coulston & Hyder, who dispersed the wagons among locations on the Wangarrata to Whitfield line. As of 1996, vans 7 and 12 were at Moyhu, while van 11 was destroyed by fire in 1978. Wagons 6 and 1 were scrapped in 1957 and 1958 respectively, while in 1954 van 13 was recorded as being sold to the Puffing Billy Preservation Society. In 1977, the remaining vans 3, 10 and 14 were handed over to the Emerald Tourist Railway Board, and removed from Victorian Railways records. The Puffing Billy Railway now posesses vans 3, 8, 10, 13 and 14. Historic - Victorian Railways Narrow Gauge - Rolling Stock - Louvered VanWooden Louvered Van - Made of Timber on a Wrought iron frame3 NUUpuffing billy, 3 nuu, louvered van, 2'6" guage, victorian railways, narrow gauge rolling stock -
Geelong Cycling Club
Handicap Sheet, 28/11/1934
A handicapping system is part of the competitive cycling race scene. The handicap system was used for 1 mile, 1.5 mile and 5 mile races.Provides insight into handicapping of road racing and the distances raced for the cyclists during the 1930s.Typewritten page of race handicaps for the GWCC members on 15/12/1934, signed off by the official handicapper on 28/11/1934.geelong cycling club; geelong west cycling club; gwcc; handicaps; 1930s; -
Geelong Cycling Club
Shield, 1982
This item began in 1982, finished 1983. Question arises - why did it not continue?Attempt by Club to recognise another success - but not continued.Wooden shield with small separate brass plaques in the shape of shields attached to the shield. Two of these are inscribed with winners names. The Shield also has an inscription at the top and a separate medallion with an outline of a cyclist stamped on it. A gold coloured stand with what appears to have been a cyclist on this stand has been broken off."K W Smith Perpetual Trophy/Fastest Time Road Aggregate/1982 R Bradford/1983 R Bradford"k w smith perpetual trophy; road aggregate; r. bradford; 1982; 1983; -
Tatura Irrigation & Wartime Camps Museum
Print - Heaphy's Whim - Inn Framed Print, Heaphy's Whim Inn
The inn was located on the SW corner of the intersection now known as Dhurringile Rd and Hogan St. There is now no trace of the pictured building. This was the northern boundary of the James Winter estate and was called " Nelson Gate ". The town "whim " ( water pump ) was near the Brown St / Albert St round-a -boutBlack and white print in a black plastic frame with white card surround. Inn with horses and carts, people in the carts, people standing under verandah and off to the side. Wide section of road in front and trees behind -
Anglesea and District Historical Society
Piece of Slate
Piece of slate from the wreck of the "Victoria Towers" off Torquay. Cargo included building materials and roofing slate.None.victoria towers, piece of slate -
Anglesea and District Historical Society
Large Timber with Iron Spike
Wooden log with iron spike - part of the deck of the "Joseph Scammel" which sank off Point Danger, Torquay 1891.joseph scammell, timber with iron spike -
Anglesea and District Historical Society
Cream Jug, Estimated 1937
Crown Ducal Florentine Jug. Small off-white light cream colour. The top half is embossed with Florentine pattern. Gold band around top of centre of jug. Gold decoration on handle.Crown illustration. Crown Ducal, Florentine Made in Englandjug, creamer, crown ducal -
Anglesea and District Historical Society
Signs
Totem of signs. 1. Hereford Stranded 1881. (Ship wrecked off Swampy Creek). 2. To Wensleydale Station Site 1890. (Railway Station Moriac to Wensleydale). 3. Pt Roadknight 1890. 4. Luggs Farm 1891. (orchard and dairy) called The Rookery. 5. First Toll Gate 1922. 6. Old Golf Link 1927. 7. Coal Discovery 1958. 8. Planet Oil Rig 1962.As abovehistoric signs -
Anglesea and District Historical Society
Ashtray, Stylecraft Promotions, Estimated 1977
Bakelite brown ashtray with gold writing around outer edge (gold mainly rubbed off).Front: MCWILLIAMS CENTENARY / 100 YEARS / PROUD OF THEIR AGE / 1877 / 1977 Back: Stylecraft Promotions S SYDNEY ashtray, mcwilliam's centenary, stylecraft promotions -
Anglesea and District Historical Society
Petrified wooden pulley sheave, 1865
A sheave is a wheel or roller with a groove along its edge for holding a belt, rope, or cable.Circular petrified wooden pulley sheave from the "Inverlochy" wrecked 1902 off Anglesea. Whitish patches of marine growth. Has been treated with a preservative.inverlochy, shipwrecks, petrified wood -
Anglesea and District Historical Society
Brass ship's bell, circa 1869
The ship "Hereford" was stranded off Anglesea in 1881. The bell was in the possession of the Noble family of Anglesea since it came off the ship.Brass bell suspended in ornate hanger - four lugs in base to secure - now with wrought iron and chain bell pull bolted to top rail of hanger. Small repair to left-hand arm of hanger which partially obscures the emblem on the stem.Hereford 1869 [unidentified emblem on stem of hanger]noble, ship's bell, hereford -
Anglesea and District Historical Society
Ship's log, Log of the "Inverlochy", 1899 - 1901
The "Inverlochy" was wrecked off Anglesea in 1902.Mostly loose-leaf pages covering period 1899 - 1901. Log is held in 12 archival folders, housed in archival slip case. inverlochy, ship's log -
Anglesea and District Historical Society
Lifebuoy, Lifebuoy from the "Inverlochy", Estimated 1865
Lifebuoy from ship sunk off Anglesea beach 1902. Inverlochy Aberdeenlifebuoy, inverlochy, shipwrecks -
Anglesea and District Historical Society
Trivet for Iron
Wrought iron metal stand for flat iron or charcoal iron. Open pattern with handle and three legs to keep iron off surface when hot.trivet -
Anglesea and District Historical Society
Laundry Mangle, Ewbank Jewel Mangle, 1890's
Maple. Two wooden rollers 600mm long (low sheen finish). Silver screw handle on the top spring. Two wooden shelves (feed/take off plates plus lower bowl stand). White metal dish. Castiron sides (red and green). Cast iron wheel handle with folding handle (wooden). Four wheels.COG: 71D Top: Wring at the ends of rollers 24 (green) Sides: Ewbank Jewel (red) RD No. 326684. Handle: Patent Ewbank - Folding Handle (black).clothes wringer, mangle, laundry -
Anglesea and District Historical Society
Radio, Breville Sydney, Breville Gem, 1950
Model 903 - Broadcast Receiver - past WW2 Tuner. Valves and tubes - GAN7, EBF35, GM5, 6x4 Principle: Super-Heterodyne ZF/IF 452KHz Wave Bands: Broadcast only (MW) Power: AC 220/240 Volt Loudspeakers: Permanent Magnetic Dynamic (PDyn) Loudspeaker (moving coil) Colour: RedBack: Internal Aerial Socket Model 903 Front: Left Dial - OFF VOLUME. Front: Right Dial - AK, MAAW, C SDB, LO, CO, G1, AR UZ, KZSR, XY BN CV; BATR HA UL WV -
Anglesea and District Historical Society
Radio, Sharp, 1956 - 63
Sharp transistor radio (2 band) manufactured in Japan with reverse painted plastic (ie painted on the inside of the plastic preventing wear or damage to the artwork). (Classic to Japanese radios of this vintage). Includes brown leather case and ear phones in separate container.2 BAND TRANSISTOR 8. Front: ON/OFF Band Numbers. VOL / 8 / SHARP Side switch: SW/BC Back: JAPAN radio, transistor, sharp -
Ruyton Girls' School
Letter, Helen Cole, 1952
The handwritten letter addresses Mrs McNaughton (also known as Kathleen "Kitty" Hepworth), thanking her for her gift to Ruyton Girls' School. The Ruytonian December 1952 also acknowledges this gift, describing Mrs McNaughton as having "presented the school with a beautiful Ruyton flag." Kathleen McNaughton was a former Ruyton student, having enrolled in 1925. The letter is signed by Helen Cole. Research indicates that the Ruyton flag was probably one used in inter and intra-school athletic competitions known as 'flag races', which were popular in the first half of the 20th century. In such races, teams ran relay-style, with their School's flag held aloft in the manner of an 18th century soldier charging into battle. Each flag was an important public symbol of school identity, and was made with care and used with pride. Though once a ubiquitous part of any school's sporting equipment, one flag races fell out of favour in the later 20th century, racing flags were usually discarded. However, it is unclear whether the flag gifted by Mrs McNaughton was indeed used for flag racing.The record has strong historic significance as it was written by a former notable student, Helen Gordon (maiden name Cole). Helen started at Little Ruyton in Prep in 1940 and finished Year 12 in 1952 as School Captain, Bromby Captain, Form Captain for Matric, Tennis Captain, Hockey Captain, Swimming Vice Captain, and an award for Best All-Round Girl. She also played baseball for Victoria. After finishing school, Helen went on to graduate from the University of Melbourne as a physiotherapist in 1956. Her first position at age 19 involved setting up clinics with the Victorian Health Department Poliomyelitis Rural division. Helen’s strong ties to Ruyton continued when she held the position of President of the Old Ruytonians’ Association from the start of 1966 to the end of 1967. In 2019, Helen received an Order of Australia Medal for service to community health as a physiotherapist. She was also the recipient of the 2022 Victorian Senior Achiever Award at Parliament House. Helen passed away in July 2023 at age 88. The record's significance is further enhanced by its strong provenance, having been produced by Ruyton Girls' School and donated to the Archives by a familial connection.One loose sheet of cream coloured paper containing a handwritten letter, and printed with Ruyton Girls' School's name and emblem.Obverse: TELEPHONE / HAWTHORN 331 / R / RUYTON GIRLS' GRAMMAR SCHOOL / RECTE ET FIDE LITER / SELBORNE ROAD. / KEW E.4. / Dear Mrs Macnaughton, / On behalf of the Ruyton / girls, I would like to thank you most / sincerely for your generous gift of our / new Ruyton flag. / As we have not had one for so / many years, this one will be most / acceptable, and we hope ^ we will be able / to exhibit in the youth marches and / on other occasions / Last week it was shown in / assembly, and everyone was so thrilled / that we are eagerly looking forward / to an opportunity to show it off. / Thanking you once again / Yours sincerely / Helen Cole / (Head Prefect) / Reverse: RGS008/2024/0008 /ruyton girls' school, students, school, ruyton, victoria, high school, senior school, day school, letter, old ruytonians association, kew