In woodworking, a moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed.Bertie Robert Edgar Greenwood was born c. 1880/81 and died aged 82 in Hawthorn in 1963. His father and possibly his grandfather were also carpenters. Bertie’s work as a cabinetmaker required precise planing to give lovely edges and other elaborate decorations. The major item in the tool collection is Bertie’s wooden box, which houses 45 different moulding planes. Later in his life, he used these skills extensively when he worked as a patternmaker for a plastering company. Bertie worked through his seventies, retiring when he lost a finger. The tool collection was donated to the Kew Historical Society by Bertie’s granddaughter, Pamela Webster Bloom, a former resident of Kew.Plane - Wooden Moulding, Beechwood & Metal, 3/4" Beading. Repaired.Stamped ‘5/16’. Also stamped with owner name ‘G. Greenwood’, with ‘G’ subsequently over-stamped with ‘B’. Later engraved number ‘39’ added on entering the collection in 2010. woodworking tools, moulding planes, bertie greenwood, carpentry, burwood road — hawthorn (vic.)

In woodworking, a moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed.Bertie Robert Edgar Greenwood was born c. 1880/81 and died aged 82 in Hawthorn in 1963. His father and possibly his grandfather were also carpenters. Bertie’s work as a cabinetmaker required precise planing to give lovely edges and other elaborate decorations. The major item in the tool collection is Bertie’s wooden box, which houses 45 different moulding planes. Later in his life, he used these skills extensively when he worked as a patternmaker for a plastering company. Bertie worked through his seventies, retiring when he lost a finger. The tool collection was donated to the Kew Historical Society by Bertie’s granddaughter, Pamela Webster Bloom, a former resident of Kew.Plane - Wooden Moulding, Beechwood & Metal, 5/8" Convex, Moseley & Son London.Stamped with owner name ‘G. Greenwood’, with ‘G’ subsequently over-stamped with ‘B’. Later engraved number ‘40’ added on entering the collection in 2010.woodworking tools, moulding planes, bertie greenwood, carpentry, burwood road — hawthorn (vic.)

In woodworking, a moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed.Bertie Robert Edgar Greenwood was born c. 1880/81 and died aged 82 in Hawthorn in 1963. His father and possibly his grandfather were also carpenters. Bertie’s work as a cabinetmaker required precise planing to give lovely edges and other elaborate decorations. The major item in the tool collection is Bertie’s wooden box, which houses 45 different moulding planes. Later in his life, he used these skills extensively when he worked as a patternmaker for a plastering company. Bertie worked through his seventies, retiring when he lost a finger. The tool collection was donated to the Kew Historical Society by Bertie’s granddaughter, Pamela Webster Bloom, a former resident of Kew.Plane - Wooden Moulding, Beechwood & Metal, 1/4" Convex. Stamped with owner name ‘G. Greenwood’, with ‘G’ subsequently over-stamped with ‘B’. Later engraved number ‘41’ added on entering the collection in 2010.woodworking tools, moulding planes, bertie greenwood, carpentry, burwood road — hawthorn (vic.)

In woodworking, a moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed.Bertie Robert Edgar Greenwood was born c. 1880/81 and died aged 82 in Hawthorn in 1963. His father and possibly his grandfather were also carpenters. Bertie’s work as a cabinetmaker required precise planing to give lovely edges and other elaborate decorations. The major item in the tool collection is Bertie’s wooden box, which houses 45 different moulding planes. Later in his life, he used these skills extensively when he worked as a patternmaker for a plastering company. Bertie worked through his seventies, retiring when he lost a finger. The tool collection was donated to the Kew Historical Society by Bertie’s granddaughter, Pamela Webster Bloom, a former resident of Kew.Plane - Wooden Moulding, Beechwood & Metal, 5/8" Ogee, Simms Queen St West London.Stamped with owner name ‘G. Greenwood’, with ‘G’ subsequently over-stamped with ‘B’. Later engraved number ‘42’ added on entering the collection in 2010.woodworking tools, moulding planes, bertie greenwood, carpentry, burwood road — hawthorn (vic.)

In woodworking, a moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed.Bertie Robert Edgar Greenwood was born c. 1880/81 and died aged 82 in Hawthorn in 1963. His father and possibly his grandfather were also carpenters. Bertie’s work as a cabinetmaker required precise planing to give lovely edges and other elaborate decorations. The major item in the tool collection is Bertie’s wooden box, which houses 45 different moulding planes. Later in his life, he used these skills extensively when he worked as a patternmaker for a plastering company. Bertie worked through his seventies, retiring when he lost a finger. The tool collection was donated to the Kew Historical Society by Bertie’s granddaughter, Pamela Webster Bloom, a former resident of Kew.Plane - Wooden Moulding, Beechwood & Metal, 1/8" Cove, Moseley & Son London.Stamped with owner name ‘G. Greenwood’, with ‘G’ subsequently over-stamped with ‘B’. Later engraved number ‘43’ added on entering the collection in 2010.woodworking tools, moulding planes, bertie greenwood, carpentry, burwood road — hawthorn (vic.)

In woodworking, a moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed.Bertie Robert Edgar Greenwood was born c. 1880/81 and died aged 82 in Hawthorn in 1963. His father and possibly his grandfather were also carpenters. Bertie’s work as a cabinetmaker required precise planing to give lovely edges and other elaborate decorations. The major item in the tool collection is Bertie’s wooden box, which houses 45 different moulding planes. Later in his life, he used these skills extensively when he worked as a patternmaker for a plastering company. Bertie worked through his seventies, retiring when he lost a finger. The tool collection was donated to the Kew Historical Society by Bertie’s granddaughter, Pamela Webster Bloom, a former resident of Kew.Plane - Wooden Moulding, White Oak & Metal, 7/8" Curved, H Wallis Wmsburg Mass.Stamped with owner name ‘G. Greenwood’, with ‘G’ subsequently over-stamped with ‘B’. Later engraved number ‘44’ added on entering the collection in 2010.woodworking tools, moulding planes, bertie greenwood, carpentry, burwood road — hawthorn (vic.)

In woodworking, a moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed.Bertie Robert Edgar Greenwood was born c. 1880/81 and died aged 82 in Hawthorn in 1963. His father and possibly his grandfather were also carpenters. Bertie’s work as a cabinetmaker required precise planing to give lovely edges and other elaborate decorations. The major item in the tool collection is Bertie’s wooden box, which houses 45 different moulding planes. Later in his life, he used these skills extensively when he worked as a patternmaker for a plastering company. Bertie worked through his seventies, retiring when he lost a finger. The tool collection was donated to the Kew Historical Society by Bertie’s granddaughter, Pamela Webster Bloom, a former resident of Kew.Plane - Wooden Moulding, Beechwood & Metal, 3/8" Angle (45).Stamped with owner name ‘G. Greenwood’, with ‘G’ subsequently over-stamped with ‘B’. Later engraved number ‘45’ added on entering the collection in 2010.moulding planes, carpentry tools, bertie greenwood, woodworking tools, burwood road — hawthorn (vic.)

According to the paper label "Over 300 Legatees participated in the ANZAC Day march commemorating Legacy's 70th Anniversary." Photos show the Legatees assembling before the march, including Legatee Barbara Leach with a tray of Rosemary for the marchers to wear. The sign says "A gift from Legacy". The Legacy Widows club puts together the trays of rosemary prior to Anzac Day to give to the public. (See also 00754 and 00756). Plus an article in the Answer reporting on the day.A record of a Anzac Day march to commemorate the 70th Anniversary.Black and white photo of Anzac Day March 1993.Marked B15 which is the frame number from the B proof sheet (00754.2)70th anniversary, anzac day, answer, march, rosemary

According to the paper label "Over 300 Legatees participated in the ANZAC Day march commemorating Legacy's 70th Anniversary." Photos show the Legatees assembling before the march, including Legatee Barbara Leach with a tray of Rosemary for the marchers to wear. The sign says "A gift from Legacy". The Legacy Widows club puts together the trays of rosemary prior to Anzac Day to give to the public. (See also 00754 and 00756). Plus an article in the Answer reporting on the day.A record of a Anzac Day march to commemorate the 70th Anniversary.Black and white photo x 3 of Anzac Day March 1993.Marked B15, B17 and B14 which are the frame numbers from the B proof sheet (00754.2)70th anniversary, anzac day, answer, march, rosemary

This timepiece uses raised dots to indicate the position of the numbers, which the wearer could then use to orient themselves and tell the time from the metal hands. The 12 position is indicated by three dots, with the 3,6,9 positions by two dots. The user would start with a finger at the centre of the face and work outwards to the end of each hand to determine position and hence be able to figure out the time. Since the watch is designed and made for touching, the metal hands are particularly robust.Silver fob watch with raised dots to indicate number position. assistive devices, braille

Photograph with caption 'WAR NURSES had a happy greeting for each other when they met before the march began. Lt.-Col. E. J. Bowe (left), who served in all war theatres, smiles as she wel-comes Captain Mavis Michell (centre), who served with the British forces, and Captain Ann Swinton (right). Captain Swin-ton is one of Australia's most decorated war nurses. She wears the ribbon of the M.B.E.'Newspaper photograph with caption'25.4.??' [could be either 57 or 51]ethel jessie bowe, mavis michell, doris ann swinton

This item would have been made as a stand to display shoes in a shop. It may have been made locally in Warrnambool. As this item was donated to the Warrnambool and District Historical Society by a member of the Dickson family some years ago, it is highly likely that the stand was used for display purposes in the Warrnambool department store of Cramond and Dickson. This store, selling mainly men’s and ladies’ wear, was established by John Cramond and James Dickson in Warrnambool in 1853 in Timor Street and it later moved to Liebig Street, closing in 1973. This stand is of interest as an example of the type of stand used for display in shops early to mid 20th century. It is also significant as a possible memento of the Cramond and Dickson shop which was so important in Warrnambool’s history.This is a shoe stand with a wooden stick or pole tapering slightly to the top and ridged in three places. The pole is mounted on a wooden pedestal which is rectangular-shaped and which is indented to form a smaller rectangular base. A small wooden piece in the shape of a flat bottom of a shoe is attached to the pole with a metal bolt and nut. This enables the shoe piece to remain flat or to be tilted at various angles. cramond and dickson store, warrnambool, history of warrnambool, shoe display

This medal has been issued to commemorate the Coronation of King George VI of England in 1937. It was issued by a department store in Warrnambool, that of Cramond and Dickson. This business was established by John Glass Cramond and James Dickson in Timor Street, Warrnambool in 1855. It moved to Liebig Street at the corner of Timor Street and sold mens and ladies wear. It had its own tailors and milliners and the building was a landmark one in Warrnambool for over 100 years. It closed in 1973. In 1937 the business of Cramond and Dickson was 82 years old. This medal is of great interest as it shows the level of fervor for British Royalty and all things British that was prevalent in Warrnambool in the 1930s. The Cramond and Dickson business was one of the most important ones in Warrnambool’s history as it operated for over 100 years. This is a silver-coloured medal commemorating the Coronation of King George VI of England. One side has the heads of King George and Queen Elizabeth surrounded by wording and the other side has the name of the Warrnambool store issuing the medal. The medal is tarnished. A piece of green string is attached to the hook at the top of the medal. ‘King George VI Queen Elizabeth Coronation 1937’ ‘Cramond & Dickson Warrnambool 1855-1937’ ‘P.J.King’ cramond and dickson, king george vi coronation, history of warrnambool

These items came from the Godfrey family who lived in Warrnambool in the mid 20th century. The hat was bought and worn by Barbara Phipps (nee Godfrey) some time in the 1960s. It was bought from the department store of Cramond and Dickson, a prominent and important business in Warrnambool from 1855 to 1973. The two felt hat shapes were bought in Italy during World War Two by Jim Godfrey and given to his wife Joy. They were never made into hats to wear but remain in their original state. These items are of interest because they are connected to a 20th century Warrnambool family and because they are good examples of women's fashions of the past..1 A beige=coloured lady's felt hat with a slight fold in the crown and with a strip of felt around the outside of the crown ending in a single knot. There are some multi=coloured feathers attached to the felt strip.The hat has a cream lining on the inside edge of the crown and the brim is stitched .2 A cream felt hat shape .3 A green felt hat shape.1 Doeskin Felt 100% Wool Geo. W. Bollman & Co. Inc. Made in U.S.A.vintage women's clothing

This object is one of a three piece set. There is also a pair of trousers and a defence leave ticket which are associated with this object. The three chevrons on the sleeve signify three years of service. The unit patch may denote that the wearer was part of the Army Serice Corps Divisional Unit one. The associated ticket shows that the serviceman was at some point travelling in uniform on defence leave in a first class carriage from Spencer Street to either Moreland, Newmarket, North Carlton, Northcote or Westgarth.As an historic army uniform with an association to Victoria this item is of local historic and social significance. It is also in very good condition. Woolen khaki jacket with button-up front. The top button is a plain brown plastic button. The lower four buttons are identical embossed dark brown metallic buttons. They depict an image of Australia in the centre with a crown above. Encircling this image are the words "Australian Military Forces". There is also a metallic clip at the waist-band and a metallic stud below the row of buttons. There are four button-up pockets on the front of the jacket. Two of these are breast pockets and the other two sit directly beneath these. There is also an interior pocket on the lower right section of the jacket. The lower right exterior pocket is missing its button. There is a spare button in the right breast pocket. All of these pocket buttons are of the same type as the decorative dark brown metallic buttons. There is also a spare unit patch in the bottom right pocket. The two cuffs are buttoned up with one decorative dark brown metalic button each. There are two identical brass badges on either collar. They depict a crown in the centre with the rising sun surrounding it and ribbons below with the words "Australian Commonwealth Military Forces". There are two identical brass badges on the shoulder edges of the epaulettes depicting the word "Australia". There are two buttons that fasten the epaulettes to the jacket near the neck which are of the same type as the decorative dark brown metallic buttons. There are two identical felt unit patches on either section of the upper arms. They have a light blue border surrounding a navy blue rectangle above a white rectangle. There is also a felt chevron just above the cuff on the right arm. This depicts three blue stitched arrows on a khaki/green background. There are also two labels stitched to the interior of the right breast pocket. Ther are two white rectangular labels that are stitched to the interior of the right breast pocket. These have inscriptions. There is also a stamp on the interior of the lower right pocket.Inscription on the two interior Labels: REGIMENTAL No........./ NAME........./ V.162 / MADE IN AUSTRALIA / 1942 / SIZE / (within a rectangle the number “26”) Stamp on the interior of the lower right pocket inscription: W.W. ( and what appears to be an upside-down W above thesearmy, uniform, jacket, army service corps, asc, divisional unit one, division one

These trousers are a part of a three piece set. There is also a jacket and a defence leave ticket which are associated with this item. There are three chevrons on the sleeve of the jacket which signify three years of service. The unit patch may denote that the wearer was part of the Army Serice Corps Divisional Unit one. The associated ticket shows that the serviceman was at some point travelling in uniform on defence leave in a first class carriage from Spencer Street to either Moreland, Newmarket, North Carlton, Northcote or Westgarth.As an historic army uniform with an association to Victoria this item is of local historic and social significance. It is also in very good condition. Long woollen button-up khaki trousers. There are six metallic buttons that fasten the fly and six more around the exterior part of the waistband. There are also two pockets on either side just below the waistband. army, uniform, jacket, army service corps, asc, divisional unit one, division one

A set of collars, possibly worn during the 1920s-1950s period, wearer unknown. A detachable collar is a shirt collar separate from the shirt, fastened to it by studs. The collar is usually made of a different fabric from the shirt, in which case it is almost always white, and, being unattached to the shirt, can be specially starched to a hard cardboard-like consistency. The popularity of detachable collars and starched collars in general began to fade in the 1920s and 30s as men’s clothes became more comfortable.These items are examples of men's clothing from the first decades of the 20th century when men wore more formal daily attire. A set of four white men's collars of assorted sizes, made from stiffened fabric.Cremorne Collar Company, Melbournemen-collars male-apparel

On 22 December 1890, the military commanders of the then separate Australian Colonies prior to the Federation of Australia met to discuss the introduction of the khaki uniform throughout Australia. They agreed that all Australian Forces with the exception of the Artillery would wear the slouch hat. It was to be looped up on one side—Victoria and Tasmania on the right and the other colonies (later states) on the left. This was done so that rifles could be held at the slope without damaging the brim. After Federation, the slouch hat became standard Australian Army headgear in 1903Today it is worn by military personnel from a number of countries, although it is primarily associated with Australia, where it is considered to be a national symbol.Slouch Hat - this broad brim hat is made of fur felt with an 8 fold hat band (puggaree) around the outside of the crown and attached to the inside of the crown is a brown leather chin strap. The left side of brim is held up by a gold colour metal rising sun badge.slouch hat, australian army, puggaree, rising sun badge, headgear

The bluestone is laid on crushed yellow ochre sandstone, with the base encircled by indigenous flowering plants. Each rock represents one of the six clans that made up the Boon wurrung. For thousands of years, Boon wurrung women and children congregated in this area during special periods in spring and summer. The area was rich in seafood and had fresh water wells dotted around it. Among the Banksia trees that provided shelter, grew indigenous plants and flowers through which the women made garlands to wear in their hair.boon wurrung, blossom, sculpture, public art, indigenous, bayside indigenous coastal trail, ellen josé, ellen jose, bluestone, sandstone

The Fashion & Design collection of the Kew Historical Society includes examples of women’s, men’s, children’s and infants’ clothing from the 18th, 19th and 20th centuries. Items in the collection were largely produced for, or purchased by women in Melbourne, and includes examples of outerwear, protective wear, nightwear, underwear and costume accessories. Jinoel of Melbourne was a evening company founded by Jill and Noel Kemelfield in 1957. The company won Gown of the Year in 1968. This outfit is one of a number of items donated by Dione McIntyre The McIntyre Collection of clothing and clothing accessories forms one of the largest single donations to our Fashion & Design collection. It includes clothing and clothing accessories worn by four women in the Cohen and McIntyre families across three generations. The items worn by Melbourne architect, and Kew resident, Dione McIntyre date from the 1960s and 1970s, and include evening wear, day wear, hats and shoes. As Dione McIntyre often accompanied her husband, fellow architect Peter McIntyre, to formal events, there are a number of pieces of evening wear among the items. The McIntyre Collection also includes items worn by women of an earlier generation: by Lilian Cohen, Dione McIntyre's mother, and by her mother-in-law, the wife of the architect Robert McIntyre. At the other end of the chronological spectrum are a number of outfits belonging to, worn and donated by Annie McIntyre. These include outfits created by notable late 20th century Australian and/or international fashion designers. The McIntyre Collection is significant historically and artistically as it includes examples of design that demonstrate changing tastes in fashion over an 80-year period. The collection is also significant in that it includes the work of a large number of Melbourne designers from the 1960s to the 1990s.Round-necked and sleeveless floor-length silver Lamé evening dress and pants by Jinoel of Melbourne. The loose dress features a long split up the side, through which the pants can be seen. Label: JINOEL OF MELBOURNEaustralian fashion - melbourne - 1960s, jinoel of melbourne (vic), mcintyre collection, evening wear, women's clothing, dione mcintyre

The Fashion & Design collection of the Kew Historical Society includes examples of women’s, men’s, children’s and infants’ clothing from the 18th, 19th and 20th centuries. Items in the collection were largely produced for, or purchased by women in Melbourne, and includes examples of outerwear, protective wear, nightwear, underwear and costume accessories. Phil Bacon was one of a number of Melbourne fashion manufacturers who emerged in Melbourne following the Second World War. The cocktail dress was once owned and worn by a resident of East Kew.Gold satin cocktail dress, gathered at the waist with beading on the bodice. The zipped opening is at the back.women's clothing, australian fashion - melbourne - 1950s, cocktail dresses, phil bacon

Linda Britten is a fashion designer who graduated from RMIT in 1968. Following her graduation she worked in the design house of Noleen King and freelanced for Kenneth Pirrie. She opened a shop in Hampton, Melbourne in the mid 1970s, and then another in Chapel Street. She first used the ‘Linda Britten’ label in 1978, designing and selling ‘up-market couture and eveningwear. Later, from 1980 she was to specialise in bridal wear. In 1980, she was awarded the Australian Fashion Designer of the Year. Three quarter length peacock-blue polyester taffeta dress with black collar. The fabric is gathered at the sleeves and at the waist to provide fullness to the design.Label: Linda Brittenlinda britten, women's clothing, australian fashion

Two women approach to enter Mirridong, with assistance from four others. From the left, the first woman speaks as she places her hand around that of the second woman's grip on a wooden cane. The second woman wears dark glasses, and has both a female and male holding her right arm. The male in the middle also holds the hands of a fourth woman, who has her other hand held by a man holding an envelope and standing behind suitcases.1 B/W photograph of people entering KelastonCK72 1/3 size also head only women 1st and 3rd from leftassociation for the blind, kelaston home (ballarat)

This head-wear was Introduced by Lieutenant colonel William Malone whilst in command of a New Zealand Territorial unit (Taranaki Rifles) just prior to World War 1. The hat's crown was said to mirror the outline of Mount Taranaki. The hat was formerly adopted by the New Zealand army in France in early 1916 and is commonly referred to as the 'Lemon Squeezer'. It is still in use for ceremonial purposes. Note: Lieutenant colonel Malone was killed in action on Gallipoli in 1915 during the battle of Chunuk Bair. Fur felt hat, khaki, similar in appearance to a Scout's hat but with a higher crown and longer 'bashes'. Blue/red/blue cloth Puggaree with brass WW1 NZ Artillery badge. Often referred to as a New Zealand "Lemon squeezer" of WW1.hat, headgear

Many soldiers travelled to Vietnam on Qantas charter airlines, which stopped for refuelling in either Hong Kong or Singapore. Because these countries were neutral, Australia had an agreement with their governments that our soldiers would not wear full uniform while there. So, soldiers were issued with multi-coloured 100% cotton shirts to be worn during the stopovers. This shirt was worn by National Serviceman Donald J Duffus, a Sapper in 17th Construction Squadron, June 1969 until June 1970.Multi coloured 100% cotton shirt with tropical pattern, commonly known as a Hawaiian shirt.shirt, don's shirt, vietnam, singapore, don duffus, 3794467, hawaiian shirt, uniform

The Fashion & Design collection of the Kew Historical Society includes examples of women’s, men’s, children’s and infants’ clothing from the 18th, 19th and 20th centuries. Items in the collection were largely produced for, or purchased by women in Melbourne, and includes examples of outerwear, protective wear, nightwear, underwear and costume accessories. Golda Whelan, a designer with Hartnell of Melbourne designed this wedding dress for her daughter Liane Whelan. Liane married John Merry at St John's Anglican Church in Toorak in 1969.The dress was manufactured in the 'house' of Hartnell of Melbourne, a leading Melbourne Fashion House in the 1950s and the 1960s.White slim line lace wedding dress, featuring eleven self-covered buttons down centre back Off centre rear opening done up by metal press studs. The dress has a silk satin lining and netting underskirt.hartnell of melbourne, golda whelan, wedding dresses, lace dresses

This photo depicts a man standing next to a large piece of mining equipment identified as a hydraulic chisel (alternative name: drifter dill or power rock drill). This piece of machinery was used in mining to place holes in the walls of a mine which were then filled with dynamite or other explosives for rock blasting or to make holes for plug and feather quarrying. The additional tools to the right of the photograph and in front of the machinery can be identified as either picks or as feather and wedges, the latter of which were used to split stone drilled by the hydraulic or power chisel. Depending on the date of the photograph, which is not provided, this chisel was either powered by electricity or by hydraulics. The following is written on the drill "R.C. FORD'S PATENT No91 / MELBOURNE VICTORIA 1879". The man depicted in this photograph wears a wide brim hat, a loose fitting white shirt and loose pants. He wears boots and has a medium sized dark beard. This attire, along with his locality in the mine and proficiency with the mining equipment, identifies this man as a miner working in this particular, but unidentified, mine. It depicts an instance of hydraulic chiseling which makes this photograph valuable for the study of mining techniques from a date c1880.The search for gold is ingrained into the history of Victoria and therefore, images like this one which portray the types of machinery used in mining can reveal important information for technology and highlight the methods used to break apart the earth in order to obtain access to gold and other precious materials during the period this photograph was captured. Further research into RC Ford can potentially reveal even further information pertaining to this photograph. This image is of important historical significance for its ability to convey information about the methods and machinery used to access gold or mine more in general. It also highlights the size of machinery at the time and allows us to compare this to the size of the person standing besides the machinery to better understand the manpower which would have been required to use and set-up this macinery.A black and white rectangular reproduced photograph printed on matte photographic paper.Reverse: 7816/ copy 1/3gold, sluicing, gold sluicing, hydraulic sluicing, gold and tin mine, mining, gold mining, beechworth, burke museum, melbourne, victoria, hat, mining machinery, machinery, r. c. ford