One of the earliest camps held for Junior Legatees, showing tents, charabancs and fashions of the day. Legatee Stan Savige had a property in the Balnarring area and some camps were held on his property. Names noted on the back of the photos include: Pat Hanna, Aaron Beattie, Stan Savige, Sandy Lowe, Bill Pearce, Lyn Rule, Donovan Joynt, Carl Carleton, George Collins, Bill Pearce, Rupert Hely, Norman Stafford. Some of these were founding legatees. Melbourne Legacy provided camps for junior legatees - the children of deceased servicemen. It started in the early years of Legacy with outings to the property of Legacy founder, Legatee Stan Savige, who had a place in Balnarring. Permanent camp buildings were built in the 1930s. The camps gave the children an opportunity of a summer beach holiday with other Legacy children.A visual record of a camp run for Junior Legatees, with founder Stan Savige in one of the photographs, showing the accommodation and activities.Folding wallet, brown and cream with black printing, set of sepia photos varying sizes, 1 negative for 00061.7Wallet: 00061.1 “77283” (pencil), Kodak (Australasia) marketing text Photos: 00061.2 “Legacy Camp, Balnarring Xmas 1930/Taken by Aaron Beattie/Pat Hanna rear/Bill Pearce Lfront Lyn Rule/Donovan Joynt Centre Front/Carl Carlton Right Front/Child unknown/extreme left 2 unknown poss. from Bendigo Club” 00061.3 “N 481” 00061.5 “N 481” 00061.6 “Legacy Club Camp Hut/Balnarring East/ 7. Dec 1929” 00061.7 “N 481” 00061.8 “L to R/Stan Savige, George Collins, Bill Pearce/Sandy Lowe Rupert Hely/Norman Stafford/413” 00061.9 “738” 00061.10 “N 481” 00061.11 “N 481” 00061.12 “ Printer Harringtons/4 43” 00061.13 “738”camp, stan savige, founding legatee, somers camp

A photo of a large group of teenage boys and men from Big Camp, 11-18 January 1969, at Lord Somers Camps. Big camp was for older Junior Legatees. This photo shows 27 people who took part. Melbourne Legacy provides camps for junior legatees. The camps gave the children an opportunity of a summer beach holiday with other Legacy children. It started with outings to the property of Legacy founder, Legatee Stan Savige, who had a place in Balnarring near the beach. Permanent camp buildings were built in 1930. In 1930 Lord Somers (Governor of Victoria) also started a camp at a nearby property and the area was renamed Somers. Legacy Somers Camps continued intermittently at Stan's property until it was decided in 1951 to make other arrangements for holidays. Including using Lord Somers Camp in Somers for the camps.Melbourne Legacy provided the Somers Camp experience for different age groups.Black and white photo of Legatees and senior boys at Big Camp in 1969. Front: Big Camp Jan 11-18 1969 in black type. Back: LEGACYbig camp, somers camp, junior legatee outing, lord somers camp

A photo of a large group of teenage boys and men from Big Camp, January 1970. Big camp was for older junior Legatees. One of the men appears to be Sir Rohan Delacombe, the Governor of Victoria and patron of Legacy (fourth from the left centre road). Melbourne Legacy provided camps for junior legatees - the children of deceased servicemen. It started with outings to the property of Legacy founder, Legatee Stan Savige, who had a place in Balnarring. Permanent camp buildings were built and with an association with Lord Somers (Governor of Victoria) it was called Somers Camp. The camps gave the children an opportunity of a summer beach holiday with other Legacy children. It came from an envelope with other Big camp photos. The Legacy envelope was marked "P5 Power House" in red pen, and Box 15 in blue pen. The contents will be items 00427 to 00430.A record of Junior Legatee camps.Black and white photo of Legatees and senior boys at Big Camp 1970.Front of photo has text over the photo: "Big Camp Jan___ 1970". On reverse "P5 Legacy / 1970 Big Camp" written in blue pen.somers camp, junior legatee outing, big camp

The International Poma at Falls Creek is a 1,219 metre long Pomalift. Pomalifts are named after their inventor, Polish born French manufacturer Jean Pomagalski. The first poma at Falls Creek was called the International because it serviced the area where a F.I.S. (Fédération Internationale de Ski) international race was held in 1960. It was built over the 1968-69 summer and was ready to operate in 1969, but due to a poor snow season, the 'Inter' didn't open to the public until 1970. The author of this article, Wolfgang Lert, was a pioneer of the ski industry in the USA. He was also editor of Western Skiing, forerunner to Ski Magazine, and a founding member of the International Skiing History Association. The company name on the back of this article is Dulmison (Aust) Pty Ltd. This company was founded in c1961 and played an integral role in development of solutions for power supply problems for the Kosciusko State Park Trust and other ski fields.This article is significant because it outlines procedures for the use of an iconic chairlift used on ski fields throughout the world, including the International Poma at Falls Creek, Victoria. A two page article with images explaining how to use a Pomalift, a new addition to the ski fields in Australia.On bottom Page 2: MADE IN AUSTRALIA UNDER LICENCE BY:- DULMISON (AUSTRALIA0 PTY. LIMITEDpoma ski lifts, international poma falls creek

Photo of an excursion to what is believed to be Blamey House in Beaumaris possibly in the 1940s or 1950s. The Beaumaris property had a swimming pool which looked very similar. It could be when junior legatees from the country came and stayed at Stanhope, Harelands and Blamey House for a summer holiday, while city children were escorted out to regional areas for a country holiday. Aerial view is a poor photocopy added for reference. From a photo album which contains photos of Holmbush and some of the excursions and events that happened there, appears to have been put together in the 1940s. Including trips to the zoo and picnics. Holmbush was one of the Legacy residences that housed junior legatees from 1942. When Blamey House in Beaumaris was sold in 1956 the name was transferred to Holmbush at 1267 Burke Road from 1957 until it was sold in 1977.A compilation of photos of the junior legatees in the Legacy residences.Black and white photo children of Holmbush at a swimming pool pasted to the page of an album.residences, holmbush, pool, blamey house

Set of 19 copy negatives, of black and white photographs of Geelong trams from Ray Pearson Collection, taken by Dave Macartney in 1975c. Original negative held in the negative file. Scanned at 2400 dpi and cropped as necessary. Images as shown replaced by scan from the original Ray Pearson Album provided by Mal Rowe, April 2020 or that there is a better image. .1 - sprinkler/water tram - see Reg Item 5894 for a better version of this photograph. .2 - No. 11 summer car, side on view - image replaced. .3 - Postcard, No. 14 summer car, Moorabool St Geelong, Real Photo 1535 - image replaced. .4 - Postcard, No. 27, Valentine Series No. 1468, Ryrie St - image replaced .5 - Postcard No. 23, Valentine 1434, Moorabool St - image replaced .6 - Postcard, Rose Series P75, Moorabool St - image replaced .7 - No. 8 - image replaced .8 - old tram after sale .9 - No. 29 Birney - See also Reg Item 5852 for a better version of this photograph .10 - No. 14 - East - see also Reg Item 5847 for a better version of this photograph. .11 - No. 25 - Belmont - see also Reg Item 5870 for a better version of this photograph. .12 - sprinkler/water tram - image replaced .13 - No. 303, in Adelaide - before becoming Geelong 27, has destination of Rosewater - image replaced .14 - 9, 20 and 22 at depot - image replaced .15 - No. 3 - see also Reg item 5826 for a better version of this photograph. .16 - No. 26 - see also Reg Item 5872 for a better version of this photograph. .17 - No. 27 0 see also Reg Item 5851 for a better version of this photograph. .18 - Floral Tram - 1938 - image replaced .19 - No. 28 at Station, Newtown - image replaced trams, tramways, geelong, floral tram, birney

After World War II, the Kiewa Hydroelectric Scheme was started in the Kiewa River valley by the State Electricity Commission of Victoria. On land previously used only for summer cattle grazing in the natural alpine grasslands, the first ski lodge was built in 1948 by workers from the scheme. The first lift, a rope tow, was built in 1951 and the first chairlift in Australia was constructed there in 1957. Falls Creek Post Office opened on 9 June 1958 (with telegraph and telephone facilities only until 1964) .Despite strong opposition from the head of the Kiewa scheme, who didn't want tourists clogging up his roads and destroying his "dry" construction camps by bringing in booze, Falls Creek boomed as much as Hotham, partly owing to its relatively good access road. Early lodges included Bogong (c.1946), Skyline (1947), Albury (1949), Myrtleford (1949) and Dawn (c.1950).The souvenir postcard photographed and produced by an enterprising local businessman Mr S K Pearce, was produced as a memento for skiers and other visitors to the Falls Creek and Mt Beauty area to send to family and friends as a reminder of their visit to the region, or to keep as a personal souvenir. It presented an excellent promotional opportunity for enterprising local businessmen to promote the area to skiers and tourists near and far. It also presents an excellent pictorial history of the falls creek area around the late 1950’s to early 1960’sColour postcard folder (unused) containing 13 photographs of the Falls Creek ski area and surrounds. Inside cover has a brief description of the area and the services available to visitors Printed on front cover- FALLS CREEK SKI VILLAGE. Your Souvenir Folder Photo of skiing slopes of the village Inside front flap - a brief description of the Falls Creek area and the services available to visitors 1. Diana Lodge parking area and Spion Kopje 2. Winterhaven Lodge 3. Ski Hirage Centre and skiing slopes 4. Ski Lodges from main road 5. Nelse and Arundel Lodges 6. Day visitors’ shelter and parking area 7. Summit T-Bar lift 8. Spur T-bar looking towards Village and Spion Kopje 9. T-bar lower station and Snow Crystal Inn 10. ‘Akja’ rescue sled in use 11. Falls Creek road and Grand Coeur Lodge annex 12. Rope tows and beginner slopes 13. Back cover- Published by Nucolorvue Pty Ltd Mentone Vic. Printed in Australia For S.K.Pearce Pty Ltd Tawonga and Mt Beauty falls creek, snow, bogong high plains, victorian alps

Sad-irons or "solid" irons were made by blacksmiths and used to smooth out material by pressing the hot iron over it. A piece of sheet -iron was placed over the kitchen fire and the irons placed on it could be heated whilst remaining clean of ash.. The women used 2 irons - one heating while the other was used. Thick cloth or gloves protected their hands from the hot irons. The handle was removed from the cool iron and re- attached to remove the hot iron from the fire. The cool iron was replaced on the fire or stove to heat again. These irons were cleaned with steel wool to prevent them marking the material. If the iron was too hot the material would scorch. Most homes set aside one day for ironing and some large households had an ironing room with a special stove designed to heat irons. However, most women had to work with a heavy, hot iron close to the fireplace even in summer.The Curtis family were early settlers in Moorabbin Shire c1880 and used sad ironsA small, curved, flat iron, with attached handle, used for cuffs, collars and frillsSILVESTER'S/ PATENT/ SALTERS / No 3 with the pretzel & a arrow going through the centresad iron, kitchen equipment, pioneers, early settlers, market gardeners, sewing, craftwork, clothing, moorabbin, brighton, bentleigh, fireplaces, stoves

Sad-irons or "solid" irons were made by blacksmiths and used to smooth out material by pressing the hot iron over it. A piece of sheet -iron was placed over the kitchen fire and the irons placed on it could be heated whilst remaining clean of ash.. The women used 2 irons - one heating while the other was used. Thick cloth or gloves protected their hands from the hot irons. The handle was removed from the cool iron and re- attached to remove the hot iron from the fire. The cool iron was replaced on the fire or stove to heat again. These irons were cleaned with steel wool to prevent them marking the material. If the iron was too hot the material would scorch. Most homes set aside one day for ironing and some large households had an ironing room with a special stove designed to heat irons. However, most women had to work with a heavy, hot iron close to the fireplace even in summer.These sad irons remind us of the difficult circumstances experienced in their daily routines by the pioneers and early settlers of Moorabbin Shire. The family of Miss M Curtis were early settlers in Moorabbin Shire. Sad-iron, domestic, flat, cast iron, Silvester's Patent, No 6, Salter, England, c. 1890-1900s A sad iron made from cast iron was heated over a fire or on a stove and used for pressing clothing and table wareSILVESTER'S/ PATENT/ SALTERS / No 6 with the pretzel & a arrow going through the centresad iron, kitchen equipment, pioneers, early settlers, market gardeners, sewing, craftwork, clothing, moorabbin, brighton, bentleigh, fireplaces, stoves

Sad-irons or "solid" irons were made by blacksmiths and used to smooth out material by pressing the hot iron over it. A piece of sheet -iron was placed over the kitchen fire and the irons placed on it could be heated whilst remaining clean of ash.. The women used 2 irons - one heating while the other was used. Thick cloth or gloves protected their hands from the hot irons. The handle was removed from the cool iron and re- attached to remove the hot iron from the fire. The cool iron was replaced on the fire or stove to heat again. These irons were cleaned with steel wool to prevent them marking the material. If the iron was too hot the material would scorch. Most homes set aside one day for ironing and some large households had an ironing room with a special stove designed to heat irons. However, most women had to work with a heavy, hot iron close to the fireplace even in summer. These sad irons remind us of the difficult circumstances experienced in their daily routines by the pioneers and early settlers of Moorabbin Shire The family of Miss M Curtis were early settlers in Moorabbin Shire. A) A heavy cast iron, flat iron with B) horseshoe shaped trivet stand c1880 The trivet can be attached to a table by an adjustable clamp.A) 5 on tip of ironsad iron, kitchen equipment, pioneers, early settlers, market gardeners, sewing, craftwork, clothing, moorabbin, brighton, bentleigh, fireplaces, stoves

Sad-irons or "solid" irons were made by blacksmiths and used to smooth out material by pressing the hot iron over it. A piece of sheet -iron was placed over the kitchen fire and the irons placed on it could be heated whilst remaining clean of ash.. The women used 2 irons - one heating while the other was used. Thick cloth or gloves protected their hands from the hot irons. The handle was removed from the cool iron and using the lifter the cool iron was replaced on the fire or stove to heat again. These irons were cleaned with steel wool to prevent them marking the material. If the iron was too hot the material would scorch. Most homes set aside one day for ironing and some large households had an ironing room with a special stove designed to heat irons. However, most women had to work with a heavy, hot iron close to the fireplace even in summer.These sad irons remind us of the difficult circumstances experienced in their daily routines by the pioneers and early settlers of Moorabbin Shire. The Curtis family were early settlers in Moorabbin ShireA) This heavy sad iron, made from cast iron, was heated over a fire or on a stove and used for pressing clothing and haberdashery. B) The separate tapered handle was used to lift the hot iron from the fire and when a "Potts" Handle was attached the ironing commenced. sad iron, kitchen equipment, fireplaces, stoves, pioneers, early settlers, market gardeners, sewing, craftwork, clothing, moorabbin, brighton, bentleigh

The ‘Alexandra Gardens’ in Cotham Road were designed and laid out by George and Thomas Pockett. The Governor of Victoria officially opened them in 1908. A report of the opening stated that “…the gardens have been laid out in large sloping lawns, divided by wide graveled paths, and dotted with tastefully arranged flower beds, which are now bright with autumn bloom”. The massed beds of shrubs and flowers included beds of chrysanthemums, a specialty of George Pockett, the Garden’s first curator. A large rotunda was constructed in 1910 to mark the Jubilee of Kew. A plaque memorialising the contribution of George Pockett, was attached to the original rotunda after his death in 1922. By 1911, electric lighting was installed to allow the public to access the Gardens, and the concerts that were held within them on summer nights. The Gardens were later to include the Jubilee Fountain, moved from the front of the Kew Post Office in 1925. The Kew Council commissioned the substantial bluestone entrance gates in 1933.The Kew Historical Society is fortunate that the City Engineer, Mr Poulter, donated a number of items held by the City of Kew to the Society for safekeeping, rather than identifying them for destruction. The most significant items donated included old maps, including those issued by the Board of Works. Other items included photographs of public works undertaken by the Department. The By-laws are part of that donation and tell us lots about the social values of the period.The Mayor, Councillors and Burgesses of the Borough of Kew published By-Law No.45 in 1908 to regulate the “Conduct of Persons whilst at or Within the Gardens known as the Alexandra Gardens”. The By-Law also set a charge for “Persons Using or Entering in or upon the said Gardens”. The 17 by-laws included predictable prohibitions on expectorating, using indecent language, interfering with the floral displays, or indeed with the caretaker gardeners. Other acts prohibited included a warning that “Children under the age of ten years not being under the control of some competent person may be removed from said gardens”. The Alexandra Gardens were at one stage surrounded by a picket fence. This might explain the prohibition on climbing upon or getting through over or under any fence at or within the gardens. The financial penalty for breaching the By-Law was determined as “…not exceeding Ten pounds and not less than Five shillings”. This original copy of the By-Law was donated to the Kew Historical Society by the City of Kew.alexandra gardens (cotham road, kew), city of kew

On a summer's day in 1891 Sean O'Day, Horse Breaker on James MacLough's "Gooloora" Station, is driving the Scots pastoralist in to the railhead at Overton after his annual inspection of that property. Silent and mature for his age, Sean was born in a dray while it was crossing the river during a flood, and has remained at home in it. Because he is always moving by dawn he is known in the borderland as Daylight O'Day. When MacLough asks him what he will be doing on the morrow O'Day replies that he will be manager. Questioned, he suggests that MacLough realises the background to his joke in that the station hands will, that night, celebrate the passing of the Boss's inspection. As they will have hangovers tomorrow all the work will naturally fall to himself, a teetotaller. MacLough nods assent, but, instead of leaving on the train, books a room for the night and a livery gig for the morrow, and drives himself to Gooloora early next morning. D.J. Martin as O'Day, H.S. Diffey as MacLough.The album and images are significant because they document literature written by a prominent member of the Wodonga community. The presentation of this precis was supported by several significant district families and individuals.Ringer's River Album Coloured photo Plate 1des martin, many a mile, ringer's river, northeast victoria stories

FALLS CREEK ROPE TOWS Toni St Elmo brought back plans for a Hamilton rope tow from New Zealand. He had a rope tow built in the summer of 1950-51 and it went into operation the following winter. Skiers were charged 10/- per day to use it. Skiers held onto the rope with a locking device called a ‘nutcracker” attached to a webbing belt. This tow, known as the Nissen Tow, continued to operate until 1960. Bob Hymans installed a shorter portable rope tow for his guests at Skyline from 1954. Other tows included the Village Tow and the Nursery Tow. Eventually most of the tows were taken over by Alpine Developments. From 1960 onwards they were gradually replaced by T-bars and then later on by chairlifts. This belt is from the original rope tow used between 1951 and 1960 in the Falls Creek ski lifts. These items are significant because were part of the earliest rope tows constructed at Falls Creek.A canvas waist belt with leg hoops and metal joining and hook used to attach skier to the rope tow. The wheel is also a damaged component of the Rope Tow.falls creek, nissen alpine club, rope tows, toni st elmo

Photographs of Junior Legatees doing outdoor activities. Melbourne Legacy arranged many events for Junior Legatees to experience. One photo has 12 children on bicycles in a forest. Another has four children in kayaks playing and having a water fight with their paddles. Another photo has a young child with a supervisor getting ready for abseiling. Names are unknown. It was with a group of photos from the 1990's in a folio with paper labels. The article in The Answer explains it was a the annual two week summer camp for Junior Legatees. In 1995 it was held at Cave Hill Creek, near Beaufort and the nearby Mt Cole State Forest. The children were supervised by a team of 12 experienced leaders from the Melbourne Legacy Leadership group assisted by educational instructors. A total of 50 attended the camp (27 boys and 23 girls). Most came from Melbourne but some from country Victoria and 9 from South Australia. A record of events run for Junior Legatees by Melbourne Legacy.Colour photo x 3 of junior legatees on bikes, in kayaks and abseiling and an article in the Answer about the youth camps.White paper label: "Junior Legatees participate in a wide range of recreational activities" in black type.junior legatee outing, answer, camp

A photo of a large group of teenage boys and men from Big Camp, January 1970. Big camp was held at Lord Somers Camp for older youths. This is a large group, approximately 27 boys and 7 adults. Another item at 00427 also is labelled as 1970. Melbourne Legacy provides camps for junior legatees. The camps gave the children an opportunity of a summer beach holiday with other Legacy children. It started with camps on the property of Legacy founder, Legatee Stan Savige, who had a place in Balnarring, close to the beach. Permanent camp buildings were built in 1930. In 1930 Lord Somers (Governor of Victoria) also started a camp at a nearby property and the area was renamed Somers. Legacy Somers Camps continued intermittently at Stan's property until it was decided in 1951 to make other arrangements for holidays. Including two other camps in the Somers area: Lord Somers Camp and the Somers School Camp (owned by the Education Department).A record of Junior Legatees attending camps.Black and white photo of Legatees and senior boys at Big Camp 1970.Front of photo has typed text over the photo: "Big Camp Jan 10 - 17 1970". On reverse "D / Legacy" written in blue pen.junior legatee outing, big camp, lord somers camp

B&W print and scanned images of a coloured postcard lent to the BTM by Mr. Norm DePomeroy, Dec. 1997. Image is an ESCo tram just past the intersection of Doveton St. and Sturt St. travelling east along the north side of Sturt. Steet towing a heavily laden horse tram as a trailer. Photo appears to be taken soon after opening of the electric trams, as the tram does not have any destination box above the driver. Possibly summer 1905/1906. Numerous people in the street, some horse drawn vehicles in the photograph. Shows buildings along the south side of Sturt St. and part of the verandah of the building at the NE corner of Doveton St. 1 copy held at 8/98. For a list and description of the same base image see Archives file - "Notes on ESCo Tram towing a heavily loaded trailer" See Reg item 4275 for other black and white prints of this photograph and 162 for the coloured postcard. See 835i3. In top of image are the words "Town Hall and Sturt Street, Ballarat"trams, tramways, esco, horse trams, postcards, doveton st, sturt st

Sixteen page booklet, off white paper, saddle stapled, titled "The Australian Tramway Employees' Association with the Electric Supply Coy. of Victoria Limited / Agreement". Has 1917 in indelible pencil on top of cover, with numerous red and pencil notes inside on the various clauses of the agreement. Date of Agreement from 1/1/1917 to continue to the 31/12/1918. Applies to both Ballarat and Bendigo. Details hours of work, rates, Sunday runs, casual rates, holidays, free passes, uniforms, window shields (windscreens) on Bendigo trams, eyesight tests, dismissals, meals, Board of Reference. First schedule gives rates of pays for all types of tramway workers and Rosters for Bendigo Eaglehawk and Cemetery line, Golden Square and Lake Weeroona line and Ballarat Rosters for Summer and winter - gives Run Nos. Signed by William Home for P. J. Pringle for ESCo and Lionel Hill, President and T. Jewell General Secretary for the Union."Ballarat Tramway Preservation Society Catalogue No. 210" in ink on top of outside cover. Numerous notes in red ink or pencil against the various rules. trams, tramways, bendigo, ballarat, atea, unions, agreements, esco

Twenty page booklet, off white paper, saddle stapled, with additional red paper cover titled "The Australian Tramway Employees' Association with the Electric Supply Coy. of Victoria Limited / Agreement". Dated on cover 1919. Agreement dated 4/9/1919 Applies to both Ballarat and Bendigo. Details hours of work, rates, Sunday runs, casual rates, holidays, free passes, uniforms, window shields (windscreens) on Bendigo trams, eyesight tests, dismissals, meals, Board of Reference. First schedule gives rates of pays for all types of tramway workers and Rosters for Bendigo Eaglehawk and Cemetery line, Golden Square and Lake Weeroona line and Ballarat Rosters for Summer and winter - gives Run Nos. Signed by P. J. Pringle for ESCo and John L Abfalter Vice President and T. Jewell General Secretary for the Union. Two copies held. On Copy two "1919" written in indelible ink on front cover."Ballarat Tramway Preservation Society Catalogue No. 211" in ink on top of outside cover. Numerous notes in red ink or pencil against the various rules. "1919" on copy two. copy 2 - has schedules varied 1/2/20 and revised amounts. trams, tramways, bendigo, ballarat, atea, unions, agreements, esco

Demonstrates aspects of Ballarat tramway operation with horse tram trailers, - copy of a postcard photograph.B&W print of an ESCo tram just past the intersection of travelling east along the north side of Sturt. Steet towing a heavily laden horse tram as a trailer. Photo appears to be taken soon after opening of the electric trams, as the tram does not have any destination box above the driver. Possibly summer 1905/1906. Numerous people in the street, some horse drawn vehicles in the photograph. Shows buildings along the south side of Sturt St. and part of the verandah of the building at the NE corner of Doveton St. Horse Trailer No. 4 In top of image are the words "Town Hall and Sturt Street, Ballarat" Two copies Larger version than normal, obtained by Bill Scott for publication. For a list and description of the same base image see Archives file - "Notes on ESCo Tram towing a heavily loaded trailer" See Reg Item 4370i1 for a colour postcard.On rear of copy 1, "WFS Collection" in ink and on rear of Copy2 - "William F Scott" address label and "WF Scott collection" in ink.trams, tramways, esco, horse trams, postcards, doveton st, sturt st, tram 8, tram 2

A silk patchwork quilt in a hexagons pattern originally owned by the Denbigh family of ‘Wimba’. The Denbigh family is recorded as living at ‘Park Villa’ ‘near Kew’ in 1856. John Denbigh was at this stage the superintendent of the local Baptist school. By 1869 they are listed as residing in Cotham Road. John Sharp Denbigh’s death in 1875 resulted in the sale of Wimba. This is an important early English silk hexagons quilt with outstanding technical workmanship, and is well-provenanced.The quilt is constructed in the popular hexagon pattern of silk off-cuts of an earlier period. Hexagon patchwork quilts were typically constructed of individual hexagons, which were formed using paper or card templates. Where these are visible, it would indicate that writing paper was used to form the templates. The quilt is unlined and has a green silk border, added at a later date. Early 19th Century patchwork quilts tended to use cotton to create the hexagons, whereas silk became the preferred medium mid-century. The quilt has been dated to the middle decades of the 19th century due to the colour range, and the exclusion of black silk hexagons. Most of the silk used in the quilt has a sheen, however there is some use of velvet in one or two larger hexagons. The exposed reverse of the quilt includes a large amount of very fine hand stitching.An unlined quilt was typically used as a summer spread. patchwork quilt, hexagon pattern, denbigh family, wimba, cotham road, kew, john denbigh, helen johnston, quilt, patchwork, textiles, migration to australia

RDNS Sister Pilmore is visiting a babe and mother to administer Post Natal nursing care and give health advice. The Trained nurses of the Melbourne District Nursing Society (MDNS), later known as Royal District Nursing Service (RDNS), visited patients in their home and gave best practice care in many fields of nursing, and to people of many cultures, throughout its 130 years of expansion. Initial visits not only assessed the specific nursing situation but the situation as a whole. Their patients ranged in age from babes, children, adults to the elderly and referrals were taken from Hospitals, General Practitioners and allied Health facilities. Some of the care the Sisters provided is as follows: – Post-Natal care given to mother and babe, Wound Care following various types of surgery, accidents, burns, cancer, leg ulcers etc. Supervising and teaching Diabetic Care, including teaching and supervising people with Diabetes to administer their own Insulin, and administering Insulin to those unable to give their own injections. Administering other injections and setting up weekly medication boxes. The Sisters performed Catheterizations on adults suffering from conditions such as Quadriplegia, Paraplegia, Multiple Sclerosis (MS), Motor Neurone Disease (MND) and Guillan-Barre Syndrome, and when required at school on children for e.g. those with Spina Bifida. The Sisters visited those requiring Cystic Fibrosis support and care; those requiring Haemo-Oncology care, including visiting children at school; those requiring Home Enteral Feeding care, and those requiring IV therapy at home and home Dialysis. Palliative Care was given including pain relief with the use of syringe drivers, personal care as needed, and advice and support to both patient and family. The Sisters provided Stoma management to those needing Urostomy, Ileostomy and Colostomy care and those requiring Continence care. HIV/AIDS nursing care was provided; visits to Homeless Persons were made. Personal care was given to patients ranging in age and with varying mobility problems, such as those with MS, MND, Guillan-Barre Syndrome, Poliomyelitis, Quadriplegia, Paraplegia, Acquired Brain Injury, to those following a Cerebrovascular Accident (Stroke), those with severe Arthritis and those with a form of Dementia. When necessary the elderly were assisted with personal care and advice given on safety factors with the use of hand rails, bath or shower seats, and hand showers. Rehabilitation with an aim towards independence remained at the forefront of the Sister’s minds and when possible using aids and instruction on safe techniques enabled the person to become fully independent. All care included giving advice and support to the patient and their Carers. The Sisters liaised with the persons Doctor, Hospital and allied Health personal when necessary.On the left of the black and white photograph is the side on view of a seated Royal District Nursing Service (RDNS), Sister Kaye Pilmore, who is visiting a mother and her babe in their home. On the right the mother, who is seated, has dark shoulder length straight hair, and is wearing a white sleeveless frock. She is looking at the Sister while she holds her dark haired baby on her knee. The babe is wearing a light coloured top. Sister, Pilmore who has dark short straight hair, is wearing her RDNS summer uniform of a white short sleeve blouse under a dark V neck tunic style frock with the RDNS insignia on the upper left. She is holding a pen in her left hand. Closed checked long curtains are seen in the background of the photograph. The partial dark haired head of another person can be seen in the left hand side foreground.. G 155 is stamped in green inkrdns, royal district nursing service, rdns patient care, sister kaye pilmore, rdns domiciliary infant and maternal care (dimc)

Appearances to the contrary, the item is not a weathervane but a finial. It was the gift of Mr John Sanderson (Jottings Easter 1920), from John Sanderson & Co., wool merchants, stock and station agents, commission and shipping agents before he leaves for England to become senior partner in Sanderson Murray & Elder, London, import and export agents. It was designed by Walter & Richard Butler Architects. (sketch published in Building : the magazine for the architect, builder, property owner and merchant vol.33, no 193, 12 Sept. 1923). The finial was already drawn on the sketch of the Central Institute made by Walter Butler. The maker of the finial, was Henry Alfred George Arnold Saw (born June 1881 in Hotham, Victoria was the son of Edward Saw (1854-1926) a tinsmith and Catherine Barton (1863-1907). He worked as a metal artificer for a metal-working business located opposite the Trades Hall in Lygon Street and was given the job of making the copper ship finial. Henry married Florence Charlotte Reeder and they had four children. Also known as Harry Saw according to his grandson Brian, he died on 9th February 1960. Henry and Florence both died within two months of each other in 1960. It is not clear when the ship was actually installed on the roof, the earliest photograph dating from 1927. The windvane fell or moved several times because of gale forces: - In 1995 : After the funds were raised to repair it, it was treated by sculptor David Hope, and reinstalled in the 1998 (Ship to Shore #3 Sept 1998). - In 2017: Carmela Lonetti from the Grimwade Centre for Cultural Materials Conservation (Ship to Shore Autumn 2017) - In 2019: a generous passerby donated the necessary funds for the conservation. It was sent to Grimwade Centre for Cultural Materials Conservation (Ship to Shore 2019), treated by Evan Tindal (City of Melbourne Magainze Oct. 2020). It was reinstalled over the Summer of 2019-2020 (Ship to Shore Summer 2020). The weathervane was stolen during the night of the 6-7 March 2022. Copper price surge sparks rise in theft in Victoria in 2021-22 so it's likely the vane was stolen to be melted This sculpture is closely associated with the 1917 building and described in clippings and annual reports when the building was first newly opened. It can be seen in some of the earliest photographs of the new building and in the artist/architect Butler's impressions. The galleon is often a decorative design of Mission to Seafarers wind vane (London, Adelaide).Bronze and copper sculpture fashioned as a Wind Vane in the form of a Galleon style sailing ship with 2 pennants flying and two sails rigged atop with lower cross piece with wind directions N S E W . There is a decorative ornamental pierced scrollwork ferrule / finial with reinforcing chrome steel piping armature at base of main support which attaches to the roof or a base support. See also comments below weather vane, wind vane, sculpture, galleon, sailing ship, finial, henry alfred saw, david hope, windvane, weathervane, walter richmond butler (1864–1949), richard butler, john sanderson

Uniforms for the 1992 Barcelona Olympic Games were designed by Wendy Powitt in conjunction with the AWC. Doug Pleasance, donor of these items, worked for the AWC and closely with Wendy Powitt, obtaining these uniform examples. About the Olympic Uniforms Doug wrote- 1. The Official Uniform which was used for travel and all official functions. This included: a tailored blazer and trouser/skirt (all water repellent) by Fletcher Jones, pure wool olive-green faille fabric by Foster Valley, cotton PE formal shirt by Pelaco, pure wool knitwear by Spangaro, printed wool tie by T D Noone, wool nylon socks by Holeproof and footwear by Hush Puppy. 2. Opening Ceremony Uniform a lightweight wool fabric printed with floral designs that had been inspired by the work of Australian artist Margaret Preston. This included: Lightweight W/PE shorts by Fletcher Jones in Foster Valley Fabric, socks by Holeproof and footwear by Hush Puppy. 3. Village Clothing was designed to be highly visible garments to make it easy to spot the Aussie and helped to contribute to good team spirit. This included: A pure wool shirt featuring blocks of contrasting colours, and a newly developed stretch 50:50 wool/cotton fabric by Bradmill was made into shorts and jeans by Fletcher Jones.8142.1 - Olive green long wool/nylon blend socks without packaging. 8142.2 - Olive green long wool/nylon blend socks in packaging.8142.2 - On packaging- "Shoe size Kingsize11-14." "Wool Rich Blend." "HOLEPROOF HEROES" "Help put Australia back on its feet." On reverse of packaging- "If every Australian bought just two pairs of Holeproof Heroes we could help save our wool industry and put this country back on its feet." "Made in Australia." "CARE INSTRUCTIONS. warm machine wash. Wash and dry inside out. Wash dark colours separately. Do not bleach. Warm tumble dry. Dry without delay. 60% Wool 40% Nylon." Separate sticker label- "HOLEPROOF HEROES. Summer Winter Wool."1992 barcelona olympics, sport, athletes, fashion, design, uniform

This specimen is a Black-Headed Gull in the adult winter plumage. This plumage is mostly white and grey with a small dark mark on the sides of the head. During the summer months, the plumage on the head of the bird turns a black colour which is called a hood. This species can be found over much of Europe, except Spain, Italy and Greece. It also resides in northeastern Canada, Northeast America and in some of the Caribbean Islands. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum and the National Museum of Victoria, as well as individuals such amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century. This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century.A pale grey and white coloured Gull standing on a wooden platform. The bill and legs are a pale yellow colour and the toes are webbed. The small eyes are made from glass and black in colour. The specimen has a darker spot of plumage behind the eyes and darker feathers in its tail. Paper tag 1: "28a Black-headed Gull- Catalogue, Page, 43." Paper tag 2: Larus Ridibundustaxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, reynell eveleigh johns, bird, gull, black-headed gull, common gull

The harsh summer temperatures and the isolated rural environment(of the 1890's) provided the inventor of the "Coolgardie safe" (Arthur Patrick McCormick) with an idea to cool perishable foods by using water soaked "hessian" cloth to provide the "coolant" for the evaporation process to cool the inside temperature of the "safe". Items such as meat,cream/milk/butter and cool "drinks" are a few perishables that need cool environments , especially in isolated "ice free" locations. Cities during this time period had large "ice works" which delivered block ice to all areas that required a form of refrigeration. These ice blocks where held in early refrigerators to keep perishables cool to cold. This "Coolardie" safe was the next best thing for isolated rural households and travellers/campers/stockmen to provide a cooler environment for foodstuff affected by heat. Ice filled "esky" coolers and ice boxes are a modern day off shoot to the original Coogardie safe however they still rely on ice or frozen coolant bricks for cooling.This "Coogardie" safe is very significant to the Kiewa Valley and the Bogong High Plains because it represents not only the initiative thinking of the early settlers and communities but also the "primitive" solution to an everyday (1800s to 1930s) problem (before gas and electric run refrigerators) of keeping "perishables" at a low temperature and thereby prolonging their "shelf" life. This was before electricity and gas was available to the inhabitants of the Kiewa Valley and Bogong High Plains. Another cooling method for food was to have "water tight" containers dipped into the very cold streams running from the "cooler" alpine mountains and the Bogong High Plains. This however could not be carried out in all situations eg. fast flowing currents and locations away from streams. This "Coolgardie safe" is made from a medium grade steel enclosure and its appearance is of a perforated box with a wire handle and one side (long side) being a hinged "door" with a clasp securing "lock". There are air holes grouped into a small "boxed" pattern. Each "box" is divided by a crossed pattern, dividing the "holed" sections(4) into a diamond configuration of 49 small holes each. There are four sides (long) which have the perforations except for the base which does not. The base has an indentation with a loose "catch" tray to catch water spills. When in use the "box" is covered with a water "soaked" cloth. The wet cloth is used as "coolant" ie. fibers in the cloth hold the water droplets seep out evaporating the area and thereby (in mass) cooling the air inside the container.domestic refrigeration cabinets, coolgardie "safe", insect and vermin proof food containers, electric and gas free cold storage containers

Francis Powell (1861-) and Francis Hanmer (1858-1925) founded Powell and Hanmer Ltd in the Summer of 1885 for the manufacturer of bike and carriage lamps. Their first advertisements began to appear in November of 1885. In 1890 they lodged a Patent for “velocipede” lamps to be used by lightweight wheeled vehicles propelled by a rider, such as a bike, tricycle and railroad handcar. In April of 1913, they were selling headlamps for cars and in 1914 built their second factory manufacturing dynamo lighting sets in Rocky Lane Birmingham, also for the production of dynamos for motor cars. Then in 1929 Powell and Hanmer Ltd, was acquired by the Lucas company which was at that time the main competitor for the manufacture of non-electrical equipment for cycles and motorcycles. When a director of Powell and Hanmer joined the board of Austin motor cars, Lucas feared that Austins might encourage Powell and Hanmer to start to produce electrical equipment for supply to the company and as a result this association might affect Lucas's business with other large vehicle manufacturers. As a result, Lucas made an offer to Powell & Hanmer and purchased the business for £500,000. Carbide lighting was used in rural and urban areas of Australia which were not served by electrification. Its use began shortly after 1900 in many countries and continued past the 1950s. Calcium carbide pellets were placed in a container outside the home, with water piped to the container and allowed to drip on the pellets releasing acetylene. This gas was piped to lighting fixtures inside the house, where it was burned, creating a very bright flame. Carbide lighting was inexpensive but was prone to gas leaks and explosions. Early models of the automobile, motorbike and bicycles used carbide lamps as headlamps. Acetylene gas, derived from carbide, enabled early automobiles to drive safely at night. Thick concave mirrors combined with magnifying lenses projected the acetylene flame light. These type of lights were used until reliable batteries and dynamos became available, and manufacturers switched to electric lights. Acetylene lamps were also used on riverboats for night navigation. The National Museum of Australia has a lamp made in about 1910 that was used onboard the PS Enterprise, an 1878 Australian paddle steamer, currently owned by the National Museum of Australia in Canberra. It is still operational, and one of the oldest working paddle steamers in the world, listed on the Australian Register of Historic Vehicles.Acetylene Carbide lamp, Model “Panther” distinct patterned side red and green lenses. These lamps were also known as acetylene gas lamps. They work off a chemical reaction between calcium carbide and water.Model 75flagstaff hill, warrnambool, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, carbide lamp, motor vehicle, bike lamp, lighting, vehicle lighting, powell, hanmer, acetylene gas lamp, early lighting

Francis Powell (1861-) and Francis Hanmer (1858-1925) founded Powell and Hanmer Ltd in the Summer of 1885 for the manufacturer of bike and carriage lamps. Their first advertisements began to appear in November of 1885. In 1890 they lodged a Patent for “velocipede” lamps to be used by lightweight wheeled vehicles propelled by a rider, such as a bike, tricycle and railroad handcar. In April of 1913, they were selling headlamps for cars and in 1914 built their second factory manufacturing dynamo lighting sets in Rocky Lane Birmingham, also for the production of dynamos for motor cars. Then in 1929 Powell and Hanmer Ltd, was acquired by the Lucas company which was at that time the main competitor for the manufacture of non-electrical equipment for cycles and motorcycles. When a director of Powell and Hanmer joined the board of Austin motor cars, Lucas feared that Austins might encourage Powell and Hanmer to start to produce electrical equipment for supply to the company and as a result this association might affect Lucas's business with other large vehicle manufacturers. As a result, Lucas made an offer to Powell & Hanmer and purchased the business for £500,000. Carbide lighting was used in rural and urban areas of Australia which were not served by electrification. Its use began shortly after 1900 in many countries and continued past the 1950s. Calcium carbide pellets were placed in a container outside the home, with water piped to the container and allowed to drip on the pellets releasing acetylene. This gas was piped to lighting fixtures inside the house, where it was burned, creating a very bright flame. Carbide lighting was inexpensive but was prone to gas leaks and explosions. Early models of the automobile, motorbike and bicycles used carbide lamps as headlamps. Acetylene gas, derived from carbide, enabled early automobiles to drive safely at night. Thick concave mirrors combined with magnifying lenses projected the acetylene flame light. These type of lights were used until reliable batteries and dynamos became available, and manufacturers switched to electric lights. Acetylene lamps were also used on riverboats for night navigation. The National Museum of Australia has a lamp made in about 1910 that was used onboard the PS Enterprise, an 1878 Australian paddle steamer, currently owned by the National Museum of Australia in Canberra. It is still operational, and one of the oldest working paddle steamers in the world, listed on the Australian Register of Historic Vehicles.Acetylene Carbide lamp, marine pattern burner housing and reflector missing Carbide Lamp, metal. Has plate for attaching to wall, & gimbal to allow lamp to remain vertical. Noneflagstaff hill, warrnambool, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, carbide lamp, motor vehicle, bike lamp, lighting, vehicle lighting, powell, hanmer, acetylene gas lamp, early lighting, marine lighting

Polishing irons were used for ironing collars and frills. Historical information Sad-irons (the term comes from an old word sald for solid) were made by blacksmiths and used to smooth out material by pressing the hot iron over it. A piece of sheet -iron was placed over the kitchen fire and the irons placed on it could be heated whilst remaining clean of ash.. The women used 2 irons - one heating while the other was used. Thick cloth or gloves protected their hands from the hot irons. The cool iron was replaced on the fire or stove to heat again. These irons were cleaned with steel wool to prevent them marking the material. If the iron was too hot the material would scorch. Most homes set aside one day for ironing and some large households had an ironing room with a special stove designed to heat irons. However, most women had to work with a heavy, hot iron close to the fireplace even in summer. A solid piece of cast iron, the base is triangular a shape with an eight centimetre base with curved sides coming to a point 13 centimetres from the base and is three and a half centimetres Thick. The bottom of the iron is curved. Two curved pieces two and a half centimetres wide, half a centimetre thick and six centimetres apart rise from rise up seven centimetres, between them is a two centimetre diameter and nine centimetre long hollow handle. Embossed on the iron is - 4 SILVESTERS PATENT SALTER and an arrow with a knotted rope around it. K13polishing iron, silvesters patent, sad iron