T. & C. Clark & Company Limited was based at Shakespeare Foundry in Wolverhampton England and was founded in 1795 by Thomas and Charles Clark. The company grew to be one of the largest iron foundries in Wolverhampton and were pioneering in the manufacture of enamelled cast iron cookware and sanitary wares. The company's product range included thousands of items, both domestic and industrial. T. & C. Clark were pioneers in the use of enamelled cast ironware, after taking out a patent in 1839 guaranteeing their products to be free of lead or arsenic. The company became the largest employer in Wolverhampton employing between 600 to 700 people.The item is significant as it was used as a domestic kitchen item to boil water safely without the concern that the metal may contain lead or arsenic as earlier cooking utensils had. Kettle metal has spiral wire piece on handle painted black T &n C Clarkflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, kettle, domestic item, cooking, kitchen ware, cast iron, t & c clark & co

T. & C. Clark & Company Limited was based at Shakespeare Foundry in Wolverhampton England and was founded in 1795 by Thomas and Charles Clark. The company grew to be one of the largest iron foundries in Wolverhampton and were pioneering in the manufacture of enamelled cast iron cookware and sanitary wares. The company's product range included thousands of items, both domestic and industrial. T. & C. Clark were pioneers in the use of enamelled cast ironware, after taking out a patent in 1839 guaranteeing their products to be free of lead or arsenic. The company became the largest employer in Wolverhampton employing between 600 to 700 people.The item is significant as it was used as a domestic kitchen item to boil water safely without the concern that the metal may contain lead or arsenic as earlier cooking utensils had.Kettle lid solid metal, handle and spout - has been painted black. Badly rusted on base"T C Clark, England"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, kettle, iron kettle, cook ware, kitchen ware, cast iron enamel ware, t c clark

Before the invention of spin driers around the 1950's most households had a mangle. A mangle or wringer is a mechanical laundry aid. This one is powered by a hand crank and used to wring water from wet laundry and seems to be a commercial one. This mangle is from the Orbost Club Hotel. It was used in the Club Hotel and later by Bronwen Di Bari in her art workshop.This item was used by the Orbost Club Hotel, the first hotel in the Orbost district.It was built in 1884 by Mr J.A. Petterson with the licence in the name of Mr Thomas Maguire, Mr Petterson's step-son (more information in Deborak Hall's In Times Gone By).A large commercial wooden and cast iron laundry mangle. It has two wooden trays and two wooden rollers. It was originally painted green. There are four metal casters on the bottom. It has a metal spring to adjust the tension with two tap handles.On side - EWBANK On turning wheel - 511 On wood at top - 24 X 5 1/4 (size of rollers) EMERALD laundry mangle wringer

Cast iron scales with porcelain plate and set of weights. Black enamel with red and gold banding, white porcelain plate with W & T Avery Ltd insignia underneath. Six weights, 2lb, 1lb, 8oz, 4oz, 2oz, 1oz.W & T Avery Birmingham to weigh 7lbsweighing, weights & measures, scales, k33.1.2.3.4.5.6.8

A souvenir from one of the last trams to Port Melbourne. Both the South Melbourne and Port Melbourne cable lines closed on this date. The South Melbourne line was converted to electric traction; the Port Melbourne line was replaced by a bus service. See item 7595 for another bell cord from the same event.Has a close association with the closure of the Port Melbourne cable tram line.Bell cord - for a grip car bell - consisting of a wooden turned handle fitted with a screw at the bottom, a length of sash cord and a cast iron end to which the rope has been glued or fastened into and a hook that went on the underside of the bell itself. On the wooden handle is a label - "Cable tram cord taken from the last tram to run in Port Melbourne"trams, tramways, cable trams, grip tram, gripmen, bell, port melbourne, last tram, closure

This Rain Head came from what was originally the “School of Mines” in Bendigo which is now part of “TAFE”.Rain head, cast, top section is rectangular shape with cast lettering on, drainage tapers down, near the bottom is a depiction of a Rising Sun cast in. Measurements are an estimation at this stage.“Victory 1919”rain, head, container

A Berdan pan was a grinding pan. The circular pan was set at an angle, and as the pan revolved, a heavy iron ball rotated in the lowest point, grinding sand or mineral to a fine powder. It was frequently used to grind impurities out of amalgam (gold in mercury), and to grind batch-lots of heavy mineral. It is also known as a ball mill. Two strong wooden A frames supporting large iron pivotable bowl with a large iron ball inside the bowl. There are cogs underneath bowl which are connected to rotating belts extending from main battery shaft. The chute attached below the bowl is directed into a circular metal container. The frame is painted green.

Iron fountain used on open fires etc. Donated by Mrs Norah Osborne, wife of Bruce , principal of High School. Early homes often had an open fire containing a fountain, buckets and kettles that hung from a hook in the fireplace. These containers supplied hot water for cooking, washing and cups of tea. Fountain was placed on hob until needed and then hung over fire.This kettle is an example of a common domestic item used in early Orbost before electricity was widespread.Large black iron fountain with swing handle and hook for using over a fire. Large brass tap and handle. Lid - Clark & Co * 4 Galls. Bottom - Clark & Co - 4 Gallons FINEST QUALITY T & C CLARK & COcooking domestic kettle fountain-iron ironware

This item is part of the Federation University Art Collection. The Art Collection features over 2000 works and was listed as a 'Ballarat Treasure' in 2007.Slip cast figuresart, artwork, venetia elbourne, venetia elbourne-hobbs, ceramics, horsham campus art collection

Seal press with seal of Bishop Michael O'Connor first bishop of Ballarat 1874- 1883.Cast seal press

Iron bed from home of Wandin Sebire, with ticking mattress and pillows and frilled hemstitched pillowslips. Patchwork Quilt mad by Local CWA for Mont De Lancey.White painted single iron bed with silver ornaments on bed head and end. Has wheels on the legs of the bed. Some paint scratched off. Has a colourful patchwork quilt and pillows on it. bedding, beds, quilts

F. M. Brown & Co were a foundry located (in 1892) on the corners of Creek and High Street in Bendigo. This embosser was manufactured by them for the City of Bendigo. Large, decorated, hand operated cast iron embosser with an top iron winder. Winder has a large knob on each end and when turned lowers and raises the seal. Embosser is decorated with a layer of plaster with is black with gold hand painted decorations including scrolls and flowers. Object is extremely heavy. Seal head is still attached and holds the embossing stamp for the City of Bendigo. 'F.M Brown Bendigo' on both sides of the embosser 'City of Bendigo' on seal head.city of bendigo commerce

This type of mobile spring weighing scales were in high use before legislative Weights and Measure standards where in force throughout Australia. This was in a time when a "mans word and handshake" was his legal document. It was a time, especially in rural areas that the term "she'll be right" was extensively used and these types of scales (the accuracy over time) would produce a near "enough is good enough" measure. These scales are very significant for the rural produce within the Kiewa Valley. Rural produce such as hay milk and butter tubs,tobacco bundles could be easily weighed (in relatively smaller packages) for both markets and for use within the valley.This spring scale (!/2 Once to 4lb) was used as general weight scale. Because it is spring loaded the accuracy would fade over time and by over weighted loads. The spring enclosure is made from cast iron painter black. There is an iron ring at the top (attaching/holding) and an iron hook at the bottom (holding). There is a brass front plate with engraved markings(on the left side) running from top to bottom and a movable pin weight indicator running in the middle indicating the weight of the item being weighed.At the front top"SALTER'S SPRING BALANCE 4LB BY 21/2 OZ" underneath "No 1A" At the bottom in smaller print "MADE IN ENGLAND PATENT"weighing instruments, spring balances

This came from the butcher's/baker's cart on display at the Slab Hut (Orbost Visitor Information Centre). The cart came from Sederlan's Bakery and had been used outside the premises as advertising. The original chassis had been added to extensively with shafts, wheels and tyres added. This axle appears to have part of the cart - either a baker's or butcher's cart.An axle from a butcher's cart. It has been painted red and is made of iron. The shaft is rounded in the centre with square sections near the ends. It has 2 U-bolts to attach the shafts to the cast springs. It has a set of washers at both ends.axle cart transport

In 1893 Harry Crowther Slingsby founded the company the family firm was at first wholesale bottlers and had established themselves in Bradford, England, later they had a branch in London. Harry Crowther Slingsby began to look into the invention of labor-saving devices for the company. He had recognised that working practices in the local factories relied heavily on manual hauling and gravity for the movement of raw materials and products from floor to floor. However, this did not solve the problem of moving items horizontally around large buildings. Slingsby then set about creating robust trucks and trolleys to move heavy loads with relative ease. Different designs were created for different purposes sack trolleys for moving large sacks of flour, sugar and dried fruit around grocery stores; high wheeled flat carts towed by one or two people; trucks fitted with wicker baskets carried fibers around textile mills and railway platform trolley to move luggage. The company is still in existence today manufacturing many different types of products.An item from the early to mid 20th century connected with railway memorabilia and a company that had humble beginnings to become today a leading UK manufacture. Railway platform luggage trolley large metal frame & wood top with 4 black metal cast iron wheels & metal structure at front with holes to put rope/harness through. Front 2 wheels swivel. Trolley painted red. Wheels are marked Bradford & Londonflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Used by Miss Alice Mitchell of Stratford. Purchased in 1909 by Miss Mitchell’s mother, and later used by Miss Mitchell who, for the duration of the war, made two pairs of socks, a flannel singlet / shirt and a pair of pyjamas (the last two on this machine), each week, for the entire war. Miss Mitchell lost three brothers and her fiancée in World War I, and was a member of the Red cross for the two world wars, and served the organisation for over 50 years.A Singer treadle sewing machine set in a large table with cast iron legs and stand with the words SINGER on it. There are two wooden drawers on either side. The machine is black and ornamented in gold. The head swings down into the stand, forming a table when not in use.world war 1914-1918

Cast iron food mincer for seeding raisins, with handle & screw attachment for securing to bench or table, black wooden handle. Marked Landers Frary & Clark New Britain Conn. USA. Pat Nov 24.96 Wet the Raisins No 4 Crown.Landers Frary & Clarkdomestic equipment, food preparation, raisin seeder, k195

BHS CollectionPink coloured trifold brochure 'Your Heritage Care of Family Graves' Document details procedures to conserve various types of headstones, metal rails, cast iron work, marble, stone etc. Produced by Friends of the Bendigo Cemeteries 2000-2001bendigo, cemetery, family graves care

Device used by drivers to unlock the tram controller and move the tram forward or in reverse. Does not appear to be have been used extensively, little wear marks. Would have been made at Preston Workshops.Demonstrates part of the equipment a driver would have used.Brass Controller key - four parts - cast handle, cast securing clip, spring and steel rivet. trams, tramways, drivers, preston workshops, controllers, controller key

Cubed iron ship tanks were invented by Richard Trevithich in 1808, in partnership with Robert Dickson, and the design was patented that year. The invention eventually replaced the wooden casks or barrels used at the time, as the ship tanks were more secure and their shape was much more economical in storage space. The robust metal tanks were originally made to transport water, but their preserving quality enabled them to transport perishable dry goods such as grain on long voyages, as well as other forms of liquid and solid cargo. The first ship tanks were made from sheets of iron, and later mild steel sheets, with double riveted edges and corners. A round cast iron lid with handle grips was fitted snugly into the top opening, providing an air-tight and water-tight seal. Brass taps were often fitted into the base, which could have been the case with this tank, but it now has a wooden bung in the hole. Sailing ships began using the new ship tanks on Australian voyages from around the 1830s, storing food and water for those on board, and filling them with other cargo. A large number of the ship tanks were repurposed in 1838 for the Victoria Settlement at Port Essington, N.T., as they were able to protect the food, clothing and other stores from termite and insect damage. Other ‘recycled’ ship tanks were cut in half and used as washing tubs or cookers. A 1929 catalogue from Hudson’s Tank Stores advertised square tanks that contained around 600 litres – 160 gallons – which equals an internal measurement of 33.25 inches – 84.5 centimetres – per side ship tanks are still made and sold in 1952 by the Globe Tank and Foundry in Wolverhampton, England, which was incorporated in 1922. Today, ship tanks can be seen around Australia. Wilsonson’s Promontory Lightstation has the lid from a ship tank that was used on site for the storage of water. Some have been repurposed as domestic water tanks and dog kennels, others for eucalyptus distilleries. Flagstaff Hill has two ship tanks. The Campaspe Port at Echuca, once a bustling river port, has a ship tank beside the locomotive yard. The lids of ship tanks are collectible items. Richard Trevithick (1771-1833): - Trevithick was born in 1771 in Cornwall, England. He was a famous British engineer and inventor during the Industrial Revolution, known for his invention of the first full-scale working railway, the high-pressure steam locomotive, which he demonstrated hauling a railway train in 1804. He set up a small workshop in 1808 at 72 Fore Street, Limehouse, London, to make iron ship tanks, and this invention was instrumental in replacing the wooden casks formerly used for storage on ships. He was involved with mining technology, iron foundry and ship equipment. Ship tanks changed the way that cargo was transported on ships and other vehicles from the 1830s and were used into the mid-20th century. The ship tanks’ advantages were that they could store more content, lasted longer, were waterproof and airtight, stackable and could be repurposed for many uses other than water, such as fuel, dry goods and domestic cargo. They have even been used aa dog kennels and cookers. Ship tanks were part of the evolving methos to transport water, food and cargo, which changed in 1956 when Malcolm McLean invented the large, rectangular shipping containers that are in use today; they speed up the process of loading on and off the ships, saving time and money. Ship tank: a cubed iron container with an offset hole on one side. The hole has cutouts for securely attaching a lid. This tank is on its side on the ground with the opening facing sideways. The side facing upwards has a wooden bung in a round hole. The ship tank is made from six square, thick iron sheets, rolled and riveted along the edges. The inside has a black sticky coating, possibly bitumen, and a strong creosote odour. There are small remnants of green paint on the outer surface.flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, iron cube, water tank, shipping container, ship tank, ship's tank, ship tanks, marine container, richard trevithich, 1808, robert dickson, water transport, water storage, iron foundry, steel sheets, iron sheets, revets, victoria settlement, port essington, globe tank and foundry, wolverhampton, british engineer, british inventor, wooden casks

Owner of tools Jim Gillespie Clayton VictoriaCaulking iron jerry iron. A Mathieson brand Mathieson trademark stamped on iron.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Inspired by the opening lines of Percy Bysshe Shelley’s 1820 poem of the same title, The Cloud has grace of line that epitomises the model of classically informed beauty. Richardson’s figure successfully follows the serpentine line of Art Nouveau sculpture while also echoing the influence of British New Sculpture with its focused attention to bodily detail and surface articulation. This bronze version of The Cloud was cast in 1987 from the original patinated plaster version from 1900 which is also in Bayside City Council's Collection. This work can be seen in the formal garden between the Brighton Town Hall and the Brighton Library.Art NouveauCharles Douglas Richardson, The Cloud 1900 (cast 1987), bronze, 190 x 40 x 40 cm. Bayside City Council Art and Heritage Collection. Commissioned 1987Bonze sculpture of a classical female figure looking downwards with a vessel in her hand. The sculpture sits on a rendered pedestal within a pond.sculpture, female figure, charles douglas richardson, the cloud, cd richardson, c douglas richardson, percy bysshe shelley, poem, art nouveau, new sculpture, flowers, public art, brighton

This chainsaw was one of the earliest models sold in Australia. It was manufactured by the Lombard company which was established in 1894 when Nathaniel Lombard developed the first practical water wheel governor in Roxbury, Massachusetts, USA. In 1904, the company moved to Ashland, Massachusetts. During the first World War, Lombard Governor produced hydraulic lathes for the manufacture of artillery shells At the conclusion of the war, Lombard expanded into the areas of chain saws and plastic molding injection machines. This model, the L-30 was only produced for 2 years from 1962 - 1964, primarily due to safety concerns and the fact that it did not have any way to sharpen or tighten the chain. This chainsaw was sold by Mann of Wodonga and donated to the Wodonga and District Historical society by David Mann, owner and manager of Mann Wodonga.This item is significant as it was produced for a limited time. It was also sold by a prominent Wodonga business.A single operator chain saw from Lombard, Ashland, Massachusetts, USA. The chainsaw was relatively lightweight but had no safety features such as a chain brake. It was made primarily of sand cast magnesium. The main cylinder was constructed of aluminium with a cast iron sleeve. It had a manual oil pump, the crankshaft operated on ball bearings and it had a maximum rpm of 4,500. See the Model profile in the accompanying Media item for details.On side of fuel tank: "ONE HALF PINT/SAE-30 OIL/ FOR EACH/ GALLON GASOLINE/ MIX WELL IN SEPARATE CONTAINER/BEFORE FILLING" On opposite side: "STARTING INSTRUCTIONS 1: FILL FUEL TANK WITH PROPER FUEL MIXTURE ( AS NOTED ON TANK) 2. FILL OIL RESERVOIR WITH #30 MOTOR OIL 3. CLOSE CHOKE, MOVE LEVER BACK TOWARDS AIR FILTER 4. HOLD THROTTLE WIDE OPEN 5. PULL STARTER HANDLE SLOWLY UNTIL STARTER ENGAGES, THEN GIVE IT A SHARP YANK 6. AS ENGINE WARMS UP, EASE CHOKE LEVER TO OPEN POSITION"hand tools, vintage chainsaws, david mann, mann wodonga

Many people used coffee grinders, spice grinders or mortar and pestle to grind the roasted coffee beans into a powder. It was made in England by Archibald Kenrick and Sons in about the 1880s. This firm had been established in 1791 in West Bromwich, Birmingham. A nineteenth century cast iron hand coffee grinder, with brass fittings. It has a brass plaque to the front which has the makers name 'A. KENRICK & SONS PATENT COFFEE MILL' around the Royal coat of arms with a lion and unicorn above the words 'DIEU ET MON DROIT'. It dates from c.1880. It has a curved shaped winding handle which has a turned wooden knob at the end. There is a brass knob on the pull out drawer at the bottom to collect the grinds. There are side attachments on the cast iron base sides so the grinder may be screwed to a bench or table.This has a brass plaque to the front which has the makers name 'A. KENRICK & SONS PATENT COFFEE MILL' around the Royal coat of arms with a lion and unicorn above the words 'DIEU ET MON DROIT'. On the base underneath the grinder is stamped ' A Kenrick & Sons' There is a hole in the middle with 'No 3' stamped underneath it. coffee grinders, coffee accessories, coffee, food processing equipment, kitchen equipment

Owner of tools Jim Gillespie Clayton VictoriaCaulking iron Short jerry ironflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village