A Fid is a conical tapered wooden tool used for separating the strands of rope for splicing. They were a tool traditionally made of wood or bone used to work with rope and canvas in marlinespike seamanship. A Fid differs from a marlinspike in material and purposes. A marlinspike is used in working with wire rope, natural and synthetic lines also may be used to open shackles, and is made of metal. A Fid is used to hold open knots and holes in the canvas, and to separate the "lays" (or strands) of synthetic or natural rope for splicing. A variation of the Fid, the gripfid, is used for ply-split braiding. The gripfid has a jamming cleat to pull a cord back through the cord split by the fid's point. Modern Fids are typically made of aluminium, steel, or plastic. In addition to holding rope open to assist the creation of a rope splice, modern push fid's have markings for precise measurements in a variety of sizes of rope. The length of these fid's is typically 21 or 22 times the diameter of rope to be spliced. Fids have been used since sailing vessels were first used to travel the worlds seas the tool was invented to be used to splice rope and with working with canvas sails. A Fid is a sailors tool that has maintained its general design for hundreds of years and gives a snapshot into what the working life was like for sailors on board sailing ships for hundreds of years. The tool in its original design is still in regular use today by recreational sailors all over the world to splice and join lengths of rope.Fid, Metal and Wood top with brass ferrule between the two.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

A memorial to still born babies lies under the trees on the west side of Eltham cemetery, Mt Pleasant Road, Eltham. A plaque within a garden bed states: “Cherished, but not cradled. This small garden is adjacent to a communal gravesite for stillborn babies, or those who died soon after birth. They were all born and /or died at Queen Victoria Medical Centre and buried between March 1979 and April 1986.” The landscaping was funded by Stillborn and Neonatal death Support (SANDS) Vic. Members. It also initially had a low wooden seat in place. (No longer in place April 2022) The Queen Victoria Medical Centre itself was founded in 1896 and at the time was one of only three hospitals worldwide founded, managed and staffed by women. The Centre has since merged and amalgamated with the Monash Medical Centre. EDHS records also indicate that it was also a communal gravesite for bodies that were donated to science. Roll of 35mm colour negative film, 6 stripsKodak GC 400-9eltham cemetery, communal grave, stillborn, memorial to still born babies, women in eltham cemetery tour, memorial, garden, sands, stillborn and neonatal death support

Bentwood furniture is a type of furniture made by bending wooden rods into the required shape after they have been heated with steam. Mundus bentwood chairs are among the most successful examples of early mass-produced furniture. The inventor of manufacturing chairs using this method was Gebrüder Thonet. The subject item was made at Josef Jaworek small factory that produced bentwood chairs and was the only Polish member associated with the Mundus furniture company of Vienna. This company was founded in 1907 and Mundus went on to merge with J & J Kohn in August of 1914. Mundus furniture was a significant manufacturing company, active in several places in the Austro Hungarian Empire, at the end of the 19th century and early 20th century. Factories seem to have existed in multiple locations including Poland. Their products carry diverse labels, such as "Budapest", "Borlova", "Czechoslovakia", etc, some of the furniture was co-signed with "Jacob and Josef Kohn". Mundus also merged with Gebrüder Thonet in 1922 the inventor of the bentwood chair.The subject item is believed to be associated with the original Warrnambool Town Hall and would have been part of the buildings furnishings. The town Hall played a significant role in both local government and social events of local and district areas. It was not only a place for Council meetings but community events and social events. The item is significant as it is an early example of mass-produced manufactured furniture from a company in Austria that pioneered this type of furniture around the turn of the late 19th and early 20th centuries. This item is now regarded as a collector's piece giving it additional significance and interest.Bentwood chair (3 of 4), painted black, inner back is curled loop. Seat is plain wood (replacing original). Splayed legs with bracing ring. Marks; Stamped into wood under seat, a small paper label and a label, cream with dark print. Paper label on rim under seat says the chair is made in Austria.Marks; Stamped into wood under seat is "49" and a small paper label with "49". Makers label, cream with dark print; on either side are 2 coins, top left coin has bust of a man, top right has an emblem with 1885 under it. Text of label "MOBEL-FABRIKEN / von / JOSEF JAWOREK / Teschen, osterr, Schlesien" flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, bentwood chair, café chair, restaurant chair, josef jaworek, austrian chairs, furniture, gebrüder thonet

Loco: 3A In service Monday, 4th June 1900 Livery Not painted Owner Puffing Billy Gauge 762 Status Stored 3A Built in 1900 and painted two-tone green, this locomotive was issued to the Upper Ferntree Gully to Gembrook line and was used in the line’s construction. Over the years, it saw service on the Colac to Crowes and Moe to Walhalla lines, but it saw more service on the Gembrook line than any other. It was withdrawn from service in 1955 at Upper Fern Tree Gully and sold in 1960 to the Lord Mayor’s Camp at Portsea where it remained on static display until 1977. From there it was eventually brought to Belgrave for eventual restoration. When restored, it will be returned, as far as possible to its original condition with wooden cow-catchers, original design side tanks, low bunker, no smoke-box ash chute, etc. It will also have its original colour scheme of two-tone green with white lining.Historic - Victorian Railways Locomotive Number Plate used on Steam Locomotive 3ALocomotive Number Plate from 3A made of cast metal & Brass3Apuffing billy, 3a, number plate

View of the early 1930's of No. 27 inbound in Lydiard St Nth. Valentine series No. 1492, with caption "Lydiard Street showing George Hotel, Ballarat". See page 59 of The Golden City and its Tramways and for the photo itself. Photo shows the wooden centre poles, street lighting, tram 27 in ESCo colour scheme, buildings on the west side of Lydiard St North, including the George Hotel, A.M.Palmer & Co Chemist, Wm Hiscock Dentist and other buildings. A horse drawn cart and two motor cars parked at the kerb. See item 8983 for the actual postcard. 3893.1 - Digital image from the Wal Jack Ballarat Album of the same photograph. Wal album notes date the photograph as 1931.Image i2 for the rear of the postcard, Image i3 for high res scan of the postcard. Copy negative image i4 added 3-5-2020.Yields information about Lydiard St Nth in the 1930's, the centre poles, traffic and the appearance of the trams.Black and White copy photograph of a Valentine Series postcard.tramways, trams, esco, lydiard st nth, george hotel, tram 27

Colour slide of large number of toys collected for distribution. There were wooden rocking horses and planes. Also soft toys such as Humpty Dumpty, teddies and koalas. The toys were part of an arrangement with the Department of Education. Schools would produce the toys, often in wood work classes and they were donated to Legacy and Carry On. The toys were given to Junior Legatees at the Government House Christmas Party. Excess toys were passed to a dozen additional charities. The whiteboard of statistics show the scheme started in 1949 and by 1962 over 8,200 toys were donated, from 201 schools. The total to that date was over 72,500 toys. It appears to be 1963 as there was space for the tally to be completed. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image is the best available.A record of toys donated to Legacy in the 1960s.Colour slide of toys stacked on a table with a board of statistics, in a white plastic mount and grey mount on the reverse.toys, department of education, toy appeal

Colour slide of large number of toys collected for distribution. There were wooden rocking horses, doll cribs and planes. Also soft toys such as Humpty Dumpty, teddies and koalas. The toys were part of an arrangement with the Department of Education. Schools would produce the toys, often in wood work classes and they were donated to Legacy and Carry On. The toys were given to Junior Legatees at the Government House Christmas Party. Excess toys were passed to a dozen additional charities. The scheme started in 1949 and by 1962 over 8,200 toys were donated, from 201 schools. The total to that date was over 72,500 toys. It appears to be 1963 as there was space for the tally to be completed. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image is the best available.A record of toys donated to Legacy in the 1960s.Colour slide of toys stacked on a table, in a white plastic mount and grey mount on the reverse.toys, department of education, toy appeal

Colour slide of large number of toys collected for distribution and a legatee thanking a schoolgirl. There were wooden rocking horses and planes. Also soft toys such as Humpty Dumpty, teddies and koalas. The toys were part of an arrangement with the Department of Education. Schools would produce the toys, often in wood work classes and they were donated to Legacy and Carry On. The toys were given to Junior Legatees at the Government House Christmas Party. Excess toys were passed to a dozen additional charities. The scheme started in 1949 and by 1962 over 8,200 toys were donated, from 201 schools. The total to that date was over 72,500 toys. It appears to be 1963 as there was space for the tally to be completed. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image is the best available.A record of toys donated to Legacy in the 1960s.Colour slide of a legatee thanking a school girl near a table stacked with toys, in a white plastic mount and grey mount on the reverse.The board in the photo says 'These toys are distributed to the Legacy and Carry-On clubs. Any toys which are left over are distributed to at least a dozen other institutions.'toys, department of education, toy appeal

Wodonga township’s first school was conducted in a small rented wooden cottage from September 1857. It was called the Belvoir National School. The building of a new schoolhouse, No. 378, began in October the same year near the corner of High and South Streets. In 1872 it changed to No. 37 Wodonga. The name was changed to Wodonga State School in 1875. This name remained until which remained until 1938 when it became a Higher Elementary School. In 1951 the Victorian Education Department purchased 12 acres of land in Ariel Street for the purpose of re-siting the State School. At this stage there were 600 pupils attending the school of which 170 were in the secondary section. Initially the Infant department moved into pre-fabricated classroom on the new site and by 1954 the whole primary school had been transferred.. The building was used became the temporary home of the Wodonga High School and later the Wodonga Technical School until they moved to new premisesA black and white image of school building mounted on card.At bottom of image: "WODONGA STATE SCHOOL 1920"wodonga state school, education wodonga

Two male teenagers sit at a table covered in a white tablecloth. One is being served by a waiter, who is placing potatoes on his plate from a silver tray, whilst the other sits with his plate complete with potato and other foodstuffs that also look a bit like potatoes in variety of ways. Two glasses sit before the teenagers, as does salt and pepper shakers and a small plate with what looks like half a boiled potato topped with slices of cucumber. In the background another waiter is walking past towards a man in a dark white and white shirt (only just visible). The room has wooden panelling and a beige concertina window, possibly concealing the kitchen behind. The wording under the picture reads "Lance and Darren experiencing silver service at a C.O.H.A.T restaurant". This could have been part of a dining experience between students who came to Burwood school and a local TAFE college.Digital image of two boys at a restaurant with a waiterrvib burwood school, education

This model of St. John’s Presbyterian Church in Warrnambool was made by Johan Carl August Landmann (1826-1920). August Landmann and his wife, Christina came from Silesia to Australia in 1854. They settled in Warrnambool where August made a living as a carpenter and joiner. At first he rented shops in Timor Street and then built a two-storeyed shop and residence in Henna Street. Landmann built many of the early commercial buildings and residences in Warrnambool and he and his family were associated with the management of the Warrnambool Western Brewery. When he retired in 1900 he built another residence in Mickle Street and it was at that time that it is believed he made the model of the Presbyterian Church and the model of the Ozone Hotel (which is in the Warrnambool Art Gallery today). St. John’s Presbyterian Church, designed by Andrew Kerr, was built in the English Gothic style and opened in 1875. It was destroyed by fire in 1920 but was rebuilt to a similar style. This model is of great significance for two reasons: 1. It was made by a prominent early Warrnambool carpenter and joiner, Johan Carl August Landmann. 2. It is the only known model of the Warrnambool St. John’s Presbyterian Church which was destroyed by fire in 1920.This model is on a wooden stand or base which is painted black with metal screws. The edging of the stand contains straw which is now brown but was originally green to resemble grass or lawn. The church is a wooden structure (hollow inside) with some sections painted to resemble sandstone. The roof is slanted and painted grey and has six dormer windows or ventilation pieces on each side. The main body of the church has a nave with dual arched windows, the west end has dual arched windows and a door with louvre ventilation and the east end has a door and dual arched windows and two conical-shaped finials. The windows, some of which are triangular, have frosted decorated glass. Some of the glass in the windows is missing. The main tower is square-shaped with four conical-shaped finials. The upper part has four sets of louvres and two arched windows. The centre and lower sections have rosette patterns and several sets of dual arched windows with frosted decorated glass panels. The north east corner has a smaller tower.johan carl august landmann, st. john’s presbyterian church, warrnambool, warrnambool history

Made by Cox, F J 1845-1882 (1891), optical & mathematical instrument maker, optician, camera manufacturer, London.Sliding box camera, about 1855. This type of camera was in use before bellows became common. The camera belonged to Hugh Strachan who passed it on to an employee, Charlie Lugg. The Strachan family is distinguished in the Geelong wool industry. James Ford Strachan, born in Scotland, established a very successful wool broking business and his sons carried on his work.Wooden case with brass handle lined with green felt containing one sliding box camera, with a brass fitting for a lense, a removable glass focussing screen, which conseals the removable lense inside the camera. Also two small wooden frames for developping the photographs. Also a linen cape and a leather pouch containing metal filters with gradients. Booklet about the life of Charles Lugg who owned the camera before it was passed to his nephew who then donated it to the NWM. Booklet details Lugg's military service, working life in Stachan's wool stores and life in Geelong and Moriac. Measurements of parts (in centimeters): 27 26 41.5 Carry Case 24.5 36.5 21.2 Sliding box Camera 15.4 .5 17.6 slide frame 11 14.5 9.5 lens 152 71 cape 9 1.5 6.5 pouch 8.5 .1 6.5 5.5 Filter Lense 8.5 .1 6.5 4.5 Filter Lense 8.5 .1 6.5 3.5 Filter Lense 8.5 .1 6.5 1.2 Filter Lense F.J. Cox/ 26/Ludgate Hill/ London (Plaque on top of box) Fred J Cox/26 Ludgate Hill/London (Engraved on side of Lens)charles lugg, fred j cox, james ford strachan

The collection of thirteen model horse drawn vehicles were carefully handmade by Mr Chas W Davis 1925 - 2002. He was a talented artist and saw doctor. This model of a horse drawn Cobb and Co coach replicates the vehicle that enjoyed respect from the public during the 1880's. There were four horse drawn models as well.A model of a red Cobb and Co enclosed coach which is a four wheeled passenger horse drawn vehicle where the driver sits at the front behind the two light brown and grey horses. The name ROYAL MAIL COBB.CO is painted in white lettering on both sides. It has four gold painted spoked wheels with black rims, two gold painted coach lamps, black padded seating and four open windows with blinds that are rolled up. There are 2 doors with a drop-down step for easy access into the coach. A long brown wooden shaft separates the horses which also have black leather shaft style straps on both sides as well as the necessary horse tack for carriage use to help the driver communicate with the horses. There is a black wooden slotted luggage rack at the back held on by gold chains. On top of the coach is a decorative gold painted luggage rack. Freeman Cobb established Cobb and Co in Australia in 1853 to operate horse drawn mail and passengers between Melbourne and the Victorian Goldfields. It expanded to Queensland in 1865. ROYAL MAIL COBB.COreplicas, models, scale models, vehicles, carriages, horse drawn vehicles, toy horses, postal services, road transport, goldfields, coaches

The collection of thirteen model horse drawn vehicles were carefully handmade by Mr Chas W Davis 1925 - 2002. He was a talented artist and saw doctor. This model of a horse drawn Canestoga Wagon replicates the vehicle that enjoyed respect from the public during the 1880's. A model of a long covered Conestoga Wagon with two horses, brown and tan. The cream fabric covers curved shaped metal bands and is laced with string around the base to attach it to the wagon.It has a green base, green wooden seat and footrest. There are two wooden barrels attached by wire on one side and the other side has a luggage box. It has two small gold painted spoked wheels with painted black tyres at the front and two larger ones at the back. The forerunner of the Conestoga Wagon had its origin in Europe as a mobile home for shepherds and nomads in the early 1800's. The east coast of America became home to people from all over Western Europe so the old wagon designs were carried to the New World. The wagons were named after a river in Lancaster County Pennsylvania where the Stutz family built them for the western treks of history. Fondly known as the 'Prairie Schooner', the cost in 1840 was $48.00, unpainted spare wheels $8.00, Lawson axles $12.00. They came in 12 and 14 feet beds.replicas, models, scale models, vehicles, carriages, horse drawn vehicles, toy horses, drays

.A clear glass bottle with eight one centimetre wide vertical groves in most of its length. Painted on the bottle in white is, C.J.GLOVER ,TRADE MARK PROGRESS REGISTERED, which has a coat of arms over it, BENDIGO, BRITISH SYPHON CO, LTD LONDON, REGNO 762. The bottle is 10.5 centimetres diameter at its base and tapers to eight and a half diameter, in the next 20 centimetres, the next eight centimetres tapers to three and a half centimetres the last eight centimetres to two and a half centimetres, the next three centimetres it rounds off to three centimetres. There is a red metal cap on top which is three centimetres diameter for two centimetres then tapers for two centimetres to one and a half centimetres which continues for two and a half centimetres with a slight flair at the top There is a small wooden cap on the top and a four by one centimetre curved wooden handle is attached near the top. On the tapered part of the cap there is metal tube protruding down at a 45-degree angle and is four centimetres long and one centimetre diameter. The bottle has a small amount of liquid in it.bottle, c.j.glover, soda bottle

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden objects. Traditionally, moulding planes were blocks of wear-resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other workers to pull the plane ahead of the master who guided it. Company History: The Holtzapffel dynasty of tool and lathe makers was founded in Long Acre, London by a Strasbourg-born turner, Jean-Jacques Holtzapffel, in 1794. The firm specialized in lathes for ornamental turning but also made a name for its high-quality edge and boring tools. Moving to London from Alsace in 1792, Jean-Jacques worked initially in the workshop of the scientific-instrument maker Jesse Ramsden, Anglicizing his name to John Jacob Holtzapffel. In 1794 he set up a tool-making partnership in Long Acre with Francis Rousset and they began trading under the name of John Holtzapffel. From 1804 he was in partnership with the Mannheim-born Johann Georg Deyerlein until the latter died in 1826, trading under the name Holtzapffel & Deyerlein. Holtzapffel sold his first lathe in June 1795, for £25-4s-10d, an enormous price at the time. All of Holtzapffel's lathes were numbered and by the time he died in 1835, about 1,600 had been sold. The business was located at 64 Charing Cross, London from 1819 until 1901 when the site was required "for building purposes". The firm then moved to 13 and 14 New Bond Street and was in premises in the Haymarket from 1907 to 1930. John's son, Charles Holtzapffel (1806–1847) joined the firm in 1827, at around which time the firm became known as Holtzapffel & Co. Charles continued to run the business after his father's death. He wrote a 2,750-page treatise entitled Turning and Mechanical Manipulation, published in 1843 which came to be regarded as the bible of ornamental turning. The final two volumes were completed and published after his death by his son, John Jacob Holtzapffel (1836–1897). When Charles Holtzapffel died in 1847 his wife Amelia ran the business until 1853. John Jacob II, the son of Charles and Amelia, was head of the firm from 1867 until 1896. A nephew of John Jacob II, George William Budd (1857–1924) became head of the firm in 1896. His son John George Holtzapffel Budd (1888–1968) later ran the business. By the early twentieth century, ornamental turning was going out of fashion, and the firm sold its last lathe in 1928. A vintage tool made by a well-known firm made for firms and individuals that worked in wood. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture or other items this had to be accomplished by hand using one of these types of planes. A significant item from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture was made predominately by hand and with tools that were themselves hand made shows the craftsmanship used to make such a unique item. Moulding Plane Holtzaffel 64 Charing & Owner J Heath 9/16" marked opposite endflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, plane, j heath

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden objects. Traditionally, moulding planes were blocks of wear-resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other workers to pull the plane ahead of the master who guided it. Company History: The Holtzapffel dynasty of tool and lathe makers was founded in Long Acre, London by a Strasbourg-born turner, Jean-Jacques Holtzapffel, in 1794. The firm specialized in lathes for ornamental turning but also made a name for its high-quality edge and boring tools. Moving to London from Alsace in 1792, Jean-Jacques worked initially in the workshop of the scientific-instrument maker Jesse Ramsden, Anglicizing his name to John Jacob Holtzapffel. In 1794 he set up a tool-making partnership in Long Acre with Francis Rousset and they began trading under the name of John Holtzapffel. From 1804 he was in partnership with the Mannheim-born Johann Georg Deyerlein until the latter died in 1826, trading under the name Holtzapffel & Deyerlein. Holtzapffel sold his first lathe in June 1795, for £25-4s-10d, an enormous price at the time. All of Holtzapffel's lathes were numbered and by the time he died in 1835, about 1,600 had been sold. The business was located at 64 Charing Cross, London from 1819 until 1901 when the site was required "for building purposes". The firm then moved to 13 and 14 New Bond Street and was in premises in the Haymarket from 1907 to 1930. John's son, Charles Holtzapffel (1806–1847) joined the firm in 1827, at around which time the firm became known as Holtzapffel & Co. Charles continued to run the business after his father's death. He wrote a 2,750-page treatise entitled Turning and Mechanical Manipulation, published in 1843 which came to be regarded as the bible of ornamental turning. The final two volumes were completed and published after his death by his son, John Jacob Holtzapffel (1836–1897). When Charles Holtzapffel died in 1847 his wife Amelia ran the business until 1853. John Jacob II, the son of Charles and Amelia, was head of the firm from 1867 until 1896. A nephew of John Jacob II, George William Budd (1857–1924) became head of the firm in 1896. His son John George Holtzapffel Budd (1888–1968) later ran the business. By the early twentieth century, ornamental turning was going out of fashion, and the firm sold its last lathe in 1928. A vintage tool made by a well-known firm made for firms and individuals that worked in wood. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture or other items this had to be accomplished by hand using one of these types of planes. A significant item from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture was made predominately by hand and with tools that were themselves hand made shows the craftsmanship used to make such a unique item. Moulding Plane Holtzaffel 64 Charing & Owner J Heath 9/16" marked opposite endflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, plane, j heath

Tribute Certificate from the Citizens of the Shire Of Dandenong.A tribute from the Citizens of the Shire of Dandenong..."James Mathew McQuade".... No 7038 23 Reinforcements 7th Battalion....Australian Imperial Forces... In appreciation of his Patriotism in Enlisted for the Service of the Empire in the Great War which began on 4th August 1914,..... Signed by President/Councillor/Shire Secretary,,,, Seal of The President Councillors & Ratepayers of the Shire of Dandenong. The certificate is surrounded by---Various flags including Union Jack and Australian Red ensign/ photographs of His Majesty the King, Right Hon.Sir Edward Grey Bt MD Lord Kitchener/ Actual Photograph of the beach where the Australian and New Zealanders landed landed at Gaba Gallipoli. Taken by Sergeant Robt.Carnie Inset is small view of the men landing from the boats. THE CERTIFICATE IS ENCLOSED IN A WOODEN FRAME

A spokeshave is a hand tool used to shape and smooth woods in woodworking jobs such as making cart wheel spokes, chair legs, paddles, bows, and arrows. The tool consists of a blade fixed into the body of the tool, which has a handle for each hand. Historically, a spokeshave was made with a wooden body and metal cutting blade. With industrialization metal bodies displaced wood in mass-produced tools. Being a small tool, spokeshaves are not suited to working large surfaces. The name spokeshave dates back to at least the 16th century, though the early history of the tool is not well documented. The name spokeshave reflects the early use of the tool by wheel wrights. The first spokeshaves were made of wood usually beech with steel blades, before being largely superseded by the development of metal-bodied spokeshaves in the latter half of the 19th century, though many woodworkers still use wooden spokeshaves. Due to their widespread use and versatility vintage wooden spokeshaves remain commonly available and relatively low in price. Spokeshaves consist of a blade or iron secured to the body or stock of the tool, which has two handles – one for each hand. The bottom surface of the tool is called the sole. The blade can be removed for sharpening, and adjusted to vary the depth of the cut. An early design consisted of a metal blade with a pair of tangs to which the wooden handles were attached, as with a draw knife. Unlike a draw knife, but like a plane, spokeshaves typically have a sole plate that fixes the angle of the blade relative to the surface being worked. There are a wide variety of different types of spokeshave, suited to different trades and applications. Company History: The firm of Alexander Mathieson & Sons was one of the leading makers of hand tools in Scotland. Its success went hand in hand with the growth of the shipbuilding industries on the Firth of Clyde in the nineteenth century and the emergence of Glasgow regarded as the "second city of the Empire". It also reflected the firm's skill in responding to an unprecedented demand for quality tools by shipyards, cooperage's and other industries, both locally and far and wide. The year 1792 was deemed by the firm to be that of its foundation it was in all likelihood the year in which John Manners had set up his plane-making workshop on Saracen Lane off the Gallowgate in the heart of Glasgow, not far from the Saracen's Head Inn, where Dr Johnson and James Boswell had stayed on their tour of Scotland in 1773. Alexander Mathieson (1797–1851) is recorded in 1822 as a plane-maker at 25 Gallowgate, but in the following year at 14 Saracen's Lane, presumably having taken over the premises of John Manners. The 1841 national census described Alexander Mathieson as a master plane-maker at 38 Saracen Lane with his son Thomas Adam working as a journeyman plane-maker. In 1849 the firm of James & William Stewart at 65 Nicolson Street, Edinburgh was taken over and Thomas was put in charge of the business, trading under the name Thomas A. Mathieson & Co. as plane and edge-tool makers. Thomas's company acquired the Edinburgh edge-tool makers Charles & Hugh McPherson and took over their premises in Gilmore Street. The Edinburgh directory of 1856/7 the business is recorded as being Alexander Mathieson & Son, plane and edge-tool makers at 48 Nicolson Street and Paul's Work, Gilmore Street. The 1851 census records indicate that Alexander was working as a tool and plane-maker employing eight men. Later that year Alexander died and his son Thomas took over the business. Under the heading of an edge-tool maker in the 1852/3 (Post-Office Glasgow Annual Directory) the firm is now listed as Alexander Mathieson & Son. By the early 1850s, the business had moved to 24 Saracen Lane. The directory for 1857/8 records that the firm had moved again only a few years later to East Campbell Street, also off the Gallowgate, and that through further diversification was also manufacturing coopers' and tin men's tools. The ten-yearly censuses log the firm's growth and in 1861 Thomas was a tool manufacturer employing 95 men and 30 boys; in 1871 he had 200 men working for him and in 1881 300 men. By 1899 the firm had been incorporated as Alexander Mathieson & Sons Ltd, even though only Alexander's son Thomas appears ever to have joined the firm.A vintage tool made by a well-known firm made for other firms and individuals that worked in wood. The tool was used to shape various items mainly in use by wheel wrights. A significant vintage item from the mid to late 19th century that today is quite sought after by collectors. It gives us a snapshot of how trade people predominately worked materials such as wood by hand and with tools that were themselves hand made shows the craftsman's art of the time. Spokeshave with blade 4 inches wide.Mathieson and Son Glasgow. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, spokeshave, mathieson and son, carpentry tools, wheel wright tools

A tyre bender is used to bend and shape metal rims for wooden wagon wheels. This tyre bender’s model first appeared in the Day Bros catalogue in 1884 as the “Giant” model. The catalogue of 1883 only showed a lighter duty model called the “Lion”. It can be assumed that this later “Giant” model was a heavy duty improvement over the 1883 "Lion" and other smaller models which were still being advertised for sale in 1884. The Day Bros foundry, makers of this tyre bender, was operating as the manufacture of wheel right and blacksmith tools and general machinery in the 19th century in the USA and successfully exported their goods all over the world. Wagon tyre benders would have been very common circa 1850-1920, so there were probably many makers over the years. Early on, it would have become clear to the blacksmiths about which designs worked best so, eventually, the various makers would have made similar products to each other. This tyre bender was once used by Harry Goodall of H. Goodall & Sons Pty. Ltd. corner of McKinnon and High Streets, Terang. Victoria. Henry Goodall & Sons Henry Goodall (1870-1936) was proprietor of garages as H. Goodall & Sons Pty. Ltd., at both Terang (McKinnon and High Streets) and Mortlake (Dunlop Street). His business was in operation in at least in 1916 and perhaps well before, considering the date of the tyre bender and its use for wagons with wooden wheels. It was still in operation in 1953, chasing up debtors in Mount Gambier Court. Amongst the employees of H. Goodall & Sons Pty. Ltd. was Ernie Entwistle, a blacksmith (a soldier who died in 1916 ) and Alfred Hodgetts, radio expert (killed in a fatal accident in 1943, when he was in his early 30s ). Henry Goodall was involved in the community as a Justice of Peace, a deputy coroner, President of the Mortlake Hospital, trustee of the Soldiers’ Memorial Hall, and as a prominent Freemason. He and his wife had two sons (Charles and John) and one daughter (Mrs. Chas. Newton, of Skipton). The tyre bender is significant as it demonstrates how blacksmiths or wheelwrights could make new metal rims for wagon wheels for carts, wagons, stage coaches and carriages over a 135 years ago. The machine is a part of our social history as it demonstrates part of the process of making wagon wheels, which played an important part in aiding the continuation of daily transport needs that people had at the time, such as farming, personal transport and commercial activities. The machine or tool is locally significant as it was used by a local company in Terang and Mortlake in their blacksmith, wheelwright and garage business. Steel tyre bender mounted on timber base, used for wagon wheel steel rims. Made from cast iron and steel, double geared with four cogs to unite the upper and lower steel rollers. There are adjustable guide collars to keep the iron in line while it is being bent. It can also be used with two cranks for heavy duty work utilising the use to two operators. It is the Giant model, made in 1884 by Day Bros. of Philadelphia. This tyre bender once belonged to Harry Goodall & Sons, blacksmith's of Terang. Victoria. “DAY BROS. PHILAP. PA” cast into the side of machineflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, machinery, wagon wheel, wheelwrights, blacksmith, steel rim wheels, tyre bender, tire bender, the giant tyre bender, henry goodall (1870-1936), terang, wheelwright tool, blacksmith trade, blacksmithing equipment and supplies, wagon tyre bender, day bros. philadelphia pennsylvania, h. goodall & sons of terang, terang blacksmith, h. goodall & sons pty ltd, mortlake, ernie entwistle blacksmith, alfred hodgetts radio expert, charles goodall, john goodall, mrs. chas. newton nee goodall

The diamond firetail bird is native to inland southeastern Australia, inhabiting woodland regions. It is often described as one of the most stunningly coloured birds of the finch family. The nest is built by both partners but only the female does the weaving. Both partners incubate the eggs and care for the young. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum in Sydney and the National Museum of Victoria (known as Museums Victoria since 1983), as well as individuals such as amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century. This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century. The diamond firetail finch it characterised by the top of its body being ash brown, with crown, forehead and neck grey. The under feathers are white with a crimson rump. There is a black band across its neck which continues down the flank to be dotted with white. The bill and eye ring are coral, and the legs and feet are dark grey. The female is similar to the male although sometimes smaller. 10057 comprises of one male and one female. This specimen stands upon a wooden platform and has an identification tag tied around its legLabel: 41a./ Firetialed Finch / See Catalogue, Page 15. /taxidermy mount, cancel, taxidermy, burke museum, beechworth, australian museum, finch, diamond firetail

Eastern Meadowlarks live throughout the grasslands and farms in eastern North America. On the ground, their brown-and-black dappled upperparts camouflage the birds among dirt clods and dry grasses. When in flight or perching, they reveal bright-yellow breasts and bellies, and a striking black chevron across the chest. The Eastern Meadowlark has a diet which consists of mainly insects and seeds. These birds forage by walking on the ground and taking insects and seeds from the ground and from low plants. In winter, these birds may choose to forage in flocks. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum in Sydney and the National Museum of Victoria (known as Museums Victoria since 1983), as well as individuals such as amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century. This Eastern Meadowlark has a yellow breast and throat with black plumage in the shape of a 'V' on it's throat. This particular specimen has a long pointed bill which is in the shape of a spear. The crown of the bird is a dark brown and it also has lighter brown/yellow stripes on the brow. The back, wings, and tail are light brown with dark brown mottling. This specimen stands upon a wooden platform and has an identification tag tied around its leg. The legs are long and the specimen has been styalised in an upright position.Label: [illegible] Ant-Eating Thrush / Catalogue, Page 66. /taxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, reynell eveleigh johns, bird, american birds, eastern meadowlark, meadowlark

The Dusky Woodswallow is often found in flocks which can be located in two separate populations. The Eastern population if located in Atherton Tableland in Queensland south to Tasmania and west to Eyre Peninsula in South Australia. The other population is found in south-west Western Australia. They reside in open forests and woodlands. This species is surprisingly aggressive and may fight with other Woodswallows for territory and nest sights. They will even chase raptors away from their homes. This species flies in flocks of around 10 to 30 birds which cluster together. In terms of diet, these birds eat insects and nectar from flowers. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum in Sydney and the National Museum of Victoria (known as Museums Victoria since 1983), as well as individuals such as amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century.The Dusky Woodswallow has largely deep brown colouring with some areas of grey on the head, neck and chest. There is a deeper brown colouring between the wings on the back of the specimen and the wings are black. This bird has a small curved bill which is grey and white. The legs are dark grey and the bird has long talons with an extra long toe in the centre. The eyes are made of brown glass with a back pupil. The bird is styalised standing on a wooden mount and has a paper identification tag attached to its right leg.[torn] / 9 /taxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, reynell eveleigh johns, bird, australian birds, swallow, woodswallow, dusky woodswallow

The Grey-headed Woodpecker is a medium-sized woodpecker of the Picidae family, that is sometimes mistaken for the similar-looking Green Woodpecker. The species is known to have a grey face, neck, and underparts, with green wings and back, and underwing feathers that are a dark brown to dark grey-black with white dots. Although this can vary depending on location, with European and Northeast Asian birds having overall paler colours, to mainland Asian birds being darker overall. The species has a distinctive black mustache-like stripe on both sides of the face and the mature males have a red patch on the top of the head. These tree-clinging woodpeckers usually feast on ants, insects, and berries. This specimen differs in appearance from the common Grey-headed Woodpecker as its back feathers appear a dark grey, where in the wild these birds have sometimes quite vibrant green feathers. The eyes of the grey-headed woodpecker are also usually red with black iris, not white with black iris as in this specimen. The beak is also a pale yellowish colour on this bird, whereas commonly the species has a grey upper beak and pale yellow lower beak. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum in Sydney and the National Museum of Victoria (known as Museums Victoria since 1983), as well as individuals such as amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century.This male Grey-headed Woodpecker has a bright red head patch and distinctive black mustache-like stripes on both sides of the face, with additional black stripes running from the pale yellowish beak to the inner corner of the eye. The underbelly is a light grey and the back is a slightly darker grey. The underwing feathers are a light rufous-brown with white dots. The specimen is mounted on a sloping vertical wooden cylindrical stick attached to a mount. There are also two paper swing tags, one of which is torn in half.149a. / Unnamed / Catalogue page 60 /taxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, reynell eveleigh johns, bird, woodpecker, grey-headed woodpecker, gray-headed woodpecker

Hobbies are mainland birds that prefer to spend their time in forests and woodlands. They are widespread in Australia's colder eastern states, particularly Adelaide, Victoria, and Southern NSW. With a diet of bats, insects, and small birds, they use their refined wing structure, which is long and narrow in shape, more suited to speed than precision, and sharp reflexes to catch prey in mid-flight. Because they are members of the Falconidae and Falconiformes raptor families and have similar characteristics, they are frequently confused with their relative, the Peregrine Falcon. Close inspection reveals that they are half the size and have a more pronounced dark masking around the eyes. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum in Sydney and the National Museum of Victoria (known as Museums Victoria since 1983), as well as individuals such as amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century.The Australian Hobby is a medium-sized bird with a falcon-like appearance, long wings, and a commanding posture and presence. This bird has a distinctive brown/black helmet on its head, as well as a mask-like face that is highlighted by the prominent white half collar. Over the top of reddish brown underpart feathers, streaks of black lined patterns decorate the protruding chest. With its squared off tail feathers, the bird's back is dark brown and appears elongated and domineering. It is perched on a wooden stand and is secured with wire that does not obscure the talons.No swing tagtaxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, reynell eveleigh johns, bird, australian birds, falcon, falconidae, falconiformes, peregrine falcon

The Little Pied Cormorant is commonly seen in Australia's wetlands. These birds reside amongst large flocks in locations where fish is plentiful. On the occasion that this bird is seen on inland streams and dams they will be solitary. This particular species willingly mixes with similar sized birds including the Little Black Cormorant. They feed on aquatic animals ranging from insects and yabbies and are labelled as benthic feeders because they find their prey on the seafloor. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum in Sydney and the National Museum of Victoria (known as Museums Victoria since 1983), as well as individuals such as amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century.The Little Pied Cormorant specimen is a small bird with white and black colouring. The back of the head, neck, wings and tail are black while the undersides are a creamy white. The feet are webbed and are also dark in colouring. The bird has pale glass eyes and a medium sized bill and a long tail. This specimen is styled to look over it's left wing with its long neck bent to look in that direction. It stands on a wooden mount with a paper identification tag attached to the bird's right foot. The mount has the number 152 written on the wood.Swing tag: 21a. / Pied Cormorant / Catalogue page 41 / Mount: 152 /taxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, reynell eveleigh johns, bird, cormorant, little piet cormorant, waterbird

This was owned and used by J.G. Ralston of Orbost. John Gavin Ralston was born 26 July 1914 at Eden, N.S.W. and came to Orbost in the early 1920's, with his parents and siblings. They lived at the corner of Tennyson and Salisbury Streets. Jack was educated at Orbost Higher Elementary School before being apprenticed to William Ross at the Snowy River Mail as a lino-type operator. He married Jean Cameron. After WW11 when he served overseas in the islands) He resumed his trade at the Snowy River Mail until 1949 when began J.G.& J.M. Ralston, Seed & Produce Merchants. Jack Ralston was very involved in the Orbost sporting community, the Presbyterian Church and the Orbost Municipal Band. He also served in the Orbost sub-branch of the R.S.L. He died on April 15 1967. (ref. Margaret Smith O.D.H.S. Newsletter) Collecting match box holders / grips was a popular hobby. They were made to fit over a box of matches for protection. Some were especially produced for significant occasions. This item is an example of a very common personal item rarely used today.A painted metal matchbox cover with a thin wooden matchbox inside. It is cream coloured with a picture of a cricketer being bowled out. In the top right hand corner is "OWZAT". The matches are Bryant & May's Crown Safety Matches. it is a rectangular cardboard box with a sliding cardboard drawer. The box has a paper label with text reading, "BRYANT & MAY'S CROWN SAFETY MATCHES" and an image of a crown. The top and bottom side has a purple striking paper, to light match. Bottom and sides of sliding drawer are a green color.J.G.Ralstonmatchbox-holder smoking-accessories ralston-j.g.