Wooden, slotted handle racquet. Inscription across neck of obverse: HARRY C. LEE & CO./NEW YORK. Company monogram across neck of reverse: L&C/TRADEMARK. Manufacturing and patent information along the sides of the handle, with the numbers '308' and '122' punched in. Materials: Wood, Plastic, Leather, Metal, Ink, Glue, Lacquertennis

Wooden, slotted handle racquet. Inscription across neck of obverse: HARRY C. LEE & CO/NEW YORK. Company logo 'LEE' on neck of reverse, and stamped on leather butt cap. Manufacturing and patent information along the sides of the handle, with various, indecipherable numbers punched in. Materials: Wood, Gut, Leather, Metal, Ink, Glue, Lacquertennis

A Dayton-built, Wilson Indestructo, wholly metallic tennis racquet, with a wood or cork fibre handle grip wrapped around lower shaft. Strung with piano wire along and across head and open throat. Model and manufacturing details engraved into underside of butt cap. Materials: Metal, Glue, Paint, String, Cord, Wood fibretennis

"Lysaght's Referee, a Handbook of Useful Information", seventeenth edition (with appendix). With the compliments of John Lysaght (Australia) Pty Ltd. Manufactured of galvanized iron. The book has a blue hardcover. A hole has been punched through the cover and the pages and a small piece of rope is tied to keep the pages and the cover together. Aileen and john Ellison Collection."L. John Ellison "Jacka Jacka" Tooan"manufacturing, lysaght

Bob (Herman) Hymans (a former member of the Royal Netherlands Navy) was born in Bloemendaal, Holland on 30th September 1922. During World War II he fought against the Japanese in the Dutch East Indies (now Indonesia) and was imprisoned in Changi and on the Burma Railway. After gaining qualifications as a Ski Instructor, Bob arrived in Falls Creek in July 1950. Working as an Instructor and Supervisor at Bogong Lodge, Bob decided his future was in accommodation. He was successful in negotiating an indenture for land from the State Electricity Commission (SEC). It took Bob two years to build his Grand Coeur Chalet but, tragically, it was burned down in August 1961. Bob also built the first Chairlift in Australia. This was a single chairlift and the structure was built from wooden electricity poles. He was constantly full of new ideas and proposals for the village. Bob Hymans die on 7th July 2007. This Collection of documents and letters tells the story of Bob's endeavours to develop Falls Creek into the ski village it is today.This item is significant because it documents an early type of over-snow transport introduced to Falls Creek by Bob Hymans.An article from an unknown publication showing a Snow-Sedan which was manufactured by Fudge's Industries at Moosomin, Saskatchewan, Canada. Bob Hymans had purchased three of these vehicles to transport goods as well as customers to his Grand Coeur Chalet. According to this article the image appeared on a Christmas card which had been received by Mr. Fudge. bob hymans, fudge snow-sedan, transport falls creek

Badge - Manufactured - brass? with gold plate finish on the rear and sides with a green and gold glazed paint finish with the Public Transport Corporation (PTC) logo and the "The Met" name and large vertical safety retained pin or clip attached to the rear. Has the words "Senior Officer" on the lower half of the badge. Badge contained within a plastic bag.trams, tramways, the met, badges, officers, ptc, public transport corporation

Builders Plate, sign - cast brass with raised letters within two raised lines and four screw holes in each corner. Black painted background. "Designed and Manufactured at the Tramways Board Workshops Preston" 2nd copy added 13/8/2020 ex Keith Kings. See Reg Item 5041 for replica plate.Has on the rear in black text pen "239"trams, tramways, signs, tramcars, tramcar bodies, mmtb, new trams, w2 class

Sign - Free Tram Zone logo and background colours printed on a sheet of 5mm clear Perspex. Adam Chandler advised 15/11/2019 - These were prototypes in the office - from memory this was to evaluate the effectiveness of the treatment to tram stop shelter glass (at a much reduced scale)." Unknown sign manufacture - produced for the PTV late 2014.trams, tramways, free tram, signs, shelters, public transport

Badge - Manufactured - brass? with stippled gold plate finish on the rear and sides with a green and gold glazed paint finish with the words "Tramways Board Traffic Officer" in gold on the front and the number "70" stamped into the badge. Has a set of two metal clips soldered onto the rear of the item. See Reg Item 1239 for other examples.trams, tramways, mmtb, badges, officers

A mass produced utilitarian item made for domestic use, there is no history or manufacturing provenance currently available.The subject item at this time cannot be associated with an historical event or person It is believed the item was manufactured in Germany pre World War ll, in the 1930s, as other examples from the period are on a number of internet sale & auction sites. This item is regarded as a collectors piece however information and company history regards the manufacturer "Rebure" has not yet been established. Balance spring scale elongated brass graduation scale to 100 Lbs hook at one end and a ring the otherRebure Pocket Balance. Made in Germany measures from 0 to 100LBSflagstaff hill, warrnambool, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, spring balance scale, rebure scale company, rebure germany, domestic item, kitchen weighing scale

The first pharyngeal tube was manufactured in 1913. This is a very early example of a curved modification of the original design. Metal tube with a flat plate inside a rubber tube. The rubber tubing extends much longer than the inner metal tube. There is a hole cut into the side of the outer tube through which the inner tube can be seen.Stamped into metal on flat piece: BT Stamped into metal on flat piece: ALLEN & HANBURYS LTD / LONDON Stamped into metal on underside of flat piece: JGairway, pharyngeal, phillip's, allen & hanburys, alfred hospital, melbourne, london

The factory was located in Doveton Street North. I & R Morley manufactured stockings, gloves and underwear. i & r morley pty ltd, doveton street north, manufacturing, building, factory

This belt was manufactured for military service. It is presumably a World War Two era article of Army uniform.This Army belt was presumably made and used during the World War Two era and therefore has historic value. Brown leather belt with a brass buckle. The belt has twelve holes in two rows at one end for fastening into the buckle. The very tip narrows to a point. There is light brown stitching along the edges of the belt. There are two brass studs which hold the leather in a loop of the other end. There is an additional piece of leather fixed to this looped edge for holding the other end in place. The buckle is made of a silver coloured brass and has two rods which pass through two of the twelve holes for fastening. The buckle also exhibits blue/green copper corrosion in several areas. belt, war, uniform, army, royal australian army, world war two, ww2, wwii, second world war

used in horse tackle late 19th and early 20th century, sold and manufactured by Holden and frostImported and sold by Holden and frost for use in equine equipmentBrass ring for use in Equine equipmentNilequine, military, agriculture, civilian, ca 1910, horse ring

Brass horse ring used in the manufacture of horse reigns and tackle imported by Holden and frost c1910Sold by Holden and Frost for military and civilian use c1910Brass bridle ring used in horse tackleequine, agriculture, military, civillian, horse ring

Brass half buckle with steel tongue as imported and used in manufacturing equine pieces by Holden and FrostUsed and sold by Holden and Frost Ca1900Brass half buckle , steel tongue imported and sold by Holden and Frostequine agricultural, military, civilianca1900, buckle

Australian manufactured black leather ammo boots to the British pattern used by the Australian armed forces.Used by Australain armed forcesAnkle high, black stiched leather ammo boots with nylon laces on 12 eyelets, internal leather tongue and moulded synthetic soles. Size 10G.Made in Australia 10*G 1987boots, footwear

Horse bit used on horse tackle during the 19th century manufactured and sold by Holden and FrostUsed on horse tackle 19th and 20th centuries Brass horse bit heavy snaffle, two T-bars joined in the middle with two rings attached on each barbit, equine, brass, snuffle

This glass milk bottle was manufactured and used mid 1800's (1834 Victorian dairy industry was founded) to the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the large volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36"This heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottled along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against sunlight penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle to contain milk required its thickness because of the extensive handling before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle a circle within it 6/33 and next to this "ONE PINT" and under this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "4"glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles

This glass milk bottle was manufactured and used mid to late 1900's (1834 Victorian dairy industry was founded) up to the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under house at 1 Beauty Ave., Mt Beauty.This heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head was manufactured to facilitate the movement of the bottled along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against light penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle which contained milk required its thickness because of the extensive handling before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle a circle within it "6/18" and next to this "MILK" and opposite "ONE PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "3"glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles

This glass milk bottle was manufactured and used mid to late 1900's (1834 Victorian dairy industry was founded) until the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under house at 1 Beauty Ave., Mt Beauty.This heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottle along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against light penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle to contain milk required its thickness because of the extensive handling before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle a circle within it "6/36" and next to this "MILK" and opposite "ONE PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "15" glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles

This glass milk bottle was manufactured and used mid to late1900's (1834 Victorian dairy industry was founded) up until the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under the house at 1 Beauty Ave., Mt BeautyThis heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottled along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against light penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle to contain milk required its thickness because of the extensive handling before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle a circle within it "6/18" and next to this "MILK" and opposite "ONE PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "4"glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles