Showing 5485 items
matching iron
-
Bendigo Historical Society Inc.
Photograph - BENDIGO TRAM DEPOT, 1980's ?
Colour photo of Bendigo Tram Depot C 1980 ( J. Lerk 28.2.2000 ) gabled roof buildings, brick with corrugated iron rooves. Tram nos. 18, 30, 21 visible wrought iron gate.organization, government, bendigo tramways -
Bendigo Historical Society Inc.
Slide - PETER ELLIS COLLECTION: SLIDE, May 1970 - Jan 1972
Coloured slide transparency. Image is of a house. The building is of brick with an iron roof. A verandah along the front has decorative iron lacework. Discarded household items sit under the verandah and a seat is on the left hand side.Kodachrome Transparencyslide, bendigo, bendigo institute of technology -
Bendigo Historical Society Inc.
Slide - BENDIGO STREET VIEWS & FORTUNA, Jan 1970
Slide. Bendigo Street Views & Fortuna. Front gate consisting of two brick pillars,wrought-iron arch,with Army Survey Regiment Icon on top,two w/iron gates & Sign to the right of the gates.slide, bendigo, bendigo street views & fortuna., bendigo street views & fortuna. -
Bendigo Historical Society Inc.
Functional object - Cast Iron Dolly Pot
Cast iron dolly pots were used in the mining industry to crush ore specimens and samples into dust before panning. The principle is the same as a mortar and pestle.This item has two pieces both are made from cast iron and are rusted and a dark brown color. One is a tapering cylinder 16.5 centimetres wide a its top, the first two and a half centimetres down tapper to 13.5 diameter, the next nine centimetres tapper to 11 centimetres diameter. the last two and a half centimetres is a solid base that flares out to a 16.5 centimetre diameter, the inside of the bottom of the cylinder is a bowl shape. The other piece is a solid tapering shape, it's four and a half centimetres in diameter at one end which tappers to three centimetres in four centimetres of length, the next sixteen centimetres tapper to two centimetre diameter. There is a knob on top, one and a half centimetre high and two and a half centimetres wide.mortar and pestle, dolly pot, gold minning -
Orbost & District Historical Society
branding iron
Branding irons are used to print a burn an identifying marker on the hide of horses or cattle so that they may be later identified if they become lost or escape from their pasture. The irons were typically forged by blacksmiths using a toolset that included hammers, anvils and chisels. The branding irons were used by heating the end bearing the owner’s initials to a very high temperature in a furnace, and then burnishing it against the skin of the cow. Brands were registered with state governments as unique marks. This allowed for a state registry to be maintained. This item is an example of a common implement used in the livestock industry in Orbodt.A long-handled branding iron with an S or 2 on the end. There is a loop at the top for hanging.branding-iron rural livestock-industry -
Port of Echuca
Black and white photograph, Mid 20th Century
The P.S Canberra was built in 1912 at Goolwa South Australia by David Milne. It was built as a fishing vessel. It was originally a steam engine, reverted to diesel, but was returned to steam in 1995. It is currently owned by the Murray Steam Ship and Tourist Co. and has operated as a tourist vessel at Echuca Since 1967. (Ref Parsons, R "Ships of the Inland Rivers " p. 58)The P.S Canberra is significant as it has operated as a tourist vessel since 1967, and continues to do so. A black and white photograph of the P.S.Canberra coming downstream from the iron bridge at Echuca.On boat the words Canberra.p.s canberra, murray steam ship & tourist company -
Glen Eira Historical Society
Historical Caulfield to 1972, photo album by Jenny O’Donnell, Ulupna Rd
1 photo of a single storey house, return veranda with iron lace workormond, ulupna rd, houses, o’donnell, jenny -
Glen Eira Historical Society
Historical Caulfield to 1972, photo album by Jenny O’Donnell, Neerim Rd
2 photos of number 37, a 2 storey Victorian with cast iron balustradeglen huntly, neerim rd, houses, victorian house, o’donnell, jenny -
Marysville & District Historical Society
Photograph (Item) - Colour photograph, Unknown
A colour photograph of a small house that was once situated on the corner of Pack and Falls Roads in Marysville in Victoria.A colour photograph of a small house that was once situated on the corner of Pack and Falls Roads in Marysville in Victoria. This house was once known as Oxley House and was destroyed in the 2009 Black Saturday bushfires.pack road, falls road, marysville, victoria, oxley house, 2009 black saturday bushfires, photograph -
Glenelg Shire Council Cultural Collection
Functional object - Seal, Portland Borough, c. 1855
Item from the Borough of Portland (1855-?)Iron seal with rectangular base oval insignia centred in cross-bar designFront: Borough of/Reg/No/Portland (in reverse) circular sealborough of portland, 1800s, seal, administration -
Glenelg Shire Council Cultural Collection
Tool - Harpoon, n.d
Part of the collection purchased from Brendan Kurtze by the City of Portland in 199..?Whaling implement, iron, painted gloss black, no handle, reconstructed handle sleeve.Front: - Back: - -
Glenelg Shire Council Cultural Collection
Photograph - Photograph - headstone, n.d
Black and white photograph of headstone surrounded by wrought iron fence, surname: 'Featherstonhaigh'Back: 'Austin Featherstone' - handwritten, pencil -
Glenelg Shire Council Cultural Collection
Tool - Cutting Spade - whaling, n.d
Iron whaling cutting spade. Short handle, flat head with rounded edges.whaling, whaling tools, portland industry, maritime -
Glenelg Shire Council Cultural Collection
Tool - Whaling - Cutting Spade, n.d
Originated from a private museum at Bolwarra. It is unknown if the whaling tools are associated with Portland's whaling industry.Iron whaling cutting spade. Long handle, small spoon shaped head. -
Glenelg Shire Council Cultural Collection
Tool - Iron Stamp, n.d
Iron stamp, octagonal shaped handle, oval head with 'W. VIVIAN PORTLAND' -
Kiewa Valley Historical Society
Boot Last x2
A last is the solid form around which a shoe is moulded. The fit of a shoe depends on the design, shape, and volume of the last. Used by boot makers and shoe makers to construct a pair of boots or shoes or to mend them.Used by residents of the Kiewa ValleyCast iron with three foot sizes on each and each facing different directions.boot last, shoe last, bootmaker -
Orbost & District Historical Society
weights, C. R. Crane
Flat round iron weights ranging from 4oz 8oz 1lb 2lbweights instruments-weighing commerce shop-equipment -
Orbost & District Historical Society
boot scraper
All black iron boot scraper. Has ornate surround and ornate scraper.boot-scraper ironware domestic-items-cleaning -
Orbost & District Historical Society
foot warmer
This container could be filled with hot water and put on the floor of a train so that passengers could warm their feet by placing their feet near the container. A blanket could be put over the warmer to contain the heat. This foot warmer was used on trains. A galvanised iron container with a screwable stopper at the top and metal handles on both ends. foot-warmer metal-foot-warmer -
Orbost & District Historical Society
broad axe, c. 1900 to 1970s
Used in the timber and sleeper-cutting industry. Used to square sleepers. This axe was possibly used by the donor John McMahon.Used in the timber and sleeper-cutting industry in the Orbost region.Timber sleepers were superceded by concrete sleepers in c. 1970s. broad-axe sleeper-cutting timber-industry An iron axe head with a very long cutting blade and a long wooden handle. broad-axe sleeper-cutting timber-industry -
Orbost & District Historical Society
paling knife, c. late 19th, early 20th century
Used for splitting wooden palings used in the construction of paling fences. Dates prior to palings being mass-produced by mechanical saws in timber mills.A rectangular iron blade attached to a wooden handle. The bottom of the blade is the sharp edge. tool hand-tool paling-knife split-timber -
Orbost & District Historical Society
raisin stoner, late 19th century
This domestic kitchen appliance is typical of the period when food processing was done at home. It would have been before the time of mass food processing factoriesA cast iron raisin stoner with a clamp. It has a wooden handle on a turning arm.On arm-PAT.APP. Aug 20.95 Oct 5-97 On one side- WET THE RAISINS On other side-ENTERPRISE M.F.C. PHILADELPHIA. P.A. U.S.A. On chute- No. 38raisin-stoner food-preparation -
Flagstaff Hill Maritime Museum and Village
Tool - Wood smoothing plane coffin pattern, Mathieson and Son, Late 19th to early 20th Century
In 1792 John Manners had set up a workshop making woodworking planes at 14 Saracens Lane Glasgow. He also had employed an apprentice Alexander Mathieson (1773-1851). But in the following year at Saracen's Lane, the 1841 census describes Alexander Mathieson as a master plane-maker now at 38 Saracen Lane with his son Thomas Adam working with him as a journeyman plane-maker. Presumably, Alexander must have taken over the premises and business of John Manners. Now that the business had Thomas Adam Mathieson working with his father it gradually grew and became more diversified, and it is recorded at the time by the Post-Office Glasgow Annual Directory that by 1847-1848 Alexander Mathieson was a “plane, brace, bit, auger & edge tool maker” In 1849 the firm of James & William Stewart at 65 Nicolson Street, Edinburgh was taken over and Thomas was put in charge of the business, trading under the name Thomas A. Mathieson & Co. as plane and edge-tool makers. Thomas's company went on to acquire the Edinburgh edge-tool makers “Charles & Hugh McPherson” and took over their premises in Gilmore Street. In the Edinburgh directory of 1856/7, the business is recorded as being Alexander Mathieson & Son, plane and edge-tool makers at 48 Nicolson Street and Paul's Work, Gilmore Street Edinburgh. The 1851 census Alexander is recorded as working as a tool and plane-maker employing eight men. Later that year Alexander died and his son Thomas took over the business. Under the heading of an edge-tool maker in the 1852/3 Post-Office Glasgow Annual Directory the firm is now listed as Alexander Mathieson & Son, with further entries as "turning-lathe and vice manufacturers". By the early 1850s, the business had moved to 24 Saracen Lane. The directory for 1857/8 records that the firm had moved again only a few years later to East Campbell Street, off the Gallowgate area, and that through further diversification was also manufacturing coopers' and tinmen's tools. The ten-yearly censuses report the firm's growth in 1861 stating that Thomas was a tool manufacturer employing 95 men and 30 boys; in 1871 he had 200 men working for him and in 1881 300 men. By 1899 the firm had been incorporated as Alexander Mathieson & Sons Ltd, even though only Alexander's son Thomas appears ever to have joined the firm so the company was still in his fathers' name. In September 1868 Thomas Mathieson put a notice in the newspapers of the Sheffield & Rotherham Independent and the Sheffield Daily Telegraph stating that his firm had used the trade-mark of a crescent and star "for some time" and that "using or imitating the Mark would be proceeded against for infringement". The firm had acquired its interest in the crescent-and-star mark from the heirs of Charles Pickslay, the Sheffield cutler who had registered it with the Cutlers' Company in 1833 and had died in 1852. The year 1868 seems also to be the one in which the name Saracen Tool Works was first adopted; not only does it figure at the foot of the notice in the Sheffield press, it also makes its first appearance in the firm's entry in the Post-Office Glasgow Annual Directory in the 1868/9 edition. As Thomas Mathieson's business grew, so too did his involvement in local public life and philanthropy. One of the representatives of the third ward on the town council of Glasgow, he became a river bailie in 1868, a magistrate in 1870 and a preceptor of Hutcheson's Hospital in 1878. He had a passion for books and was an "ardent Ruskinian". He served on the committee handling the bequest for the setting up of the Mitchell Library in Glasgow. When he died at Coulter Maynes near Biggar in 1899, he left an estate worth £142,764. Company's later years: Both Thomas's sons, James Harper and Thomas Ogilvie were involved in the continuing life of the firm. James followed in his father's footsteps in becoming a local public figure. He was appointed Deputy Lieutenant of the County of the City of Glasgow and was made a deacon of the Incorporation of the Hammermen of Glasgow in 1919. His brother Thomas Ogilvie was recorded as tool manufacturer and employer in the 1911 census. Thomas Ogilvie's son Thomas Alastair Sutherland Ogilvie Mathieson was born in 1908 took a rather different approach to engineering, however, by becoming a racing driver. In 1947 he wed the French film actress Mila Parély. The firm had won many awards at world fairs for their goods. At the Great Exhibition, London, 1851. Prize medal for joiners' tools in the class of Cutlery & Edge Tools, Great London Exposition, 1862. Prize medal honoris causa. International Exhibition, Melbourne, 1880. Gold medal International Exhibition of Industry, Science and Art, Edinburgh, 1886. Prize medalThe firm of Alexander Mathieson & Son was one of the leading makers of hand tools in Scotland. Its success went hand in hand with the growth of the shipbuilding industries on the Firth of Clyde in the nineteenth century and the emergence of Glasgow as the "second city of the Empire". It also reflected the firm's skill in responding to an unprecedented demand for quality tools by shipyards, cooperages and other industries, both locally and far and wide.Smoothing Plane coffin type reinforcing screws in body complete with iron and wedge Maker Alex Mathieson and Son flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Blacksmith's Cottage and Forge
Gem-scone iron
Domestic item used to bake gem scones.Local historyRectangle shaped cast iron baking utensil with 3 rows of 8 cups.domestic, cast iron, food preparation, gem scones -
Bright & District Historical Society operating the Bright Museum
Pick Head
Miner's iron pick head. Digging point at one end. Ballarat pattern.goldmining, pick head, tools -
Federation University Historical Collection
Photograph, Geoff Biddington, Former Cyril Retallick House (Now Australian Catholic University), Ballarat, c1967
In 1881 Cyrus Bath Retallack purchased land now known as 1200 Mair Street Ballarat. Retallack was a successful Cornish miner and engineer. He built a two storey brick mansion between 1882 and 1883, naming the property ‘Carn Brae’ after the castle in Cornwall. Substantial grounds were established with with range of exotic trees planted, a tennis court was laid out and a stables building was erected. In 1918 the site become a campus of Queen’s GIrls’ Grammar School, then Aquinas College which was merged into the Australian Catholic University from 1973. Photograph of a double storey brick building on bluestone foundations, with cast iron balcony. ballarat, geoff biddington, cast iron, bluestone, cyril retallick, australian catholic university, ballarat, aquinas college -
Flagstaff Hill Maritime Museum and Village
Plane
Plane Rabbet type maker Stanley No 78 iron, black painted finish.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Flagstaff Hill Maritime Museum and Village
Spokeshave
Spokeshave wooden round faced iron blade. Body has been repaired. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, spokeshave -
Flagstaff Hill Maritime Museum and Village
Tool - Smoothing or Jack Plane, Alexander Mathieson, Late 19th to early 20th century
In 1792 John Manners had set up a workshop making woodworking planes at 14 Saracens Lane Glasgow. He also had employed an apprentice Alexander Mathieson (1773-1851). But in the following year at Saracen's Lane, the 1841 census describes Alexander Mathieson as a master plane-maker now at 38 Saracen Lane with his son Thomas Adam working with him as a journeyman plane-maker. Presumably, Alexander must have taken over the premises and business of John Manners. Now that the business had Thomas Adam Mathieson working with his father it gradually grew and became more diversified, and it is recorded at the time by the Post-Office Glasgow Annual Directory that by 1847-1848 Alexander Mathieson was a “plane, brace, bit, auger & edge tool maker” In 1849 the firm of James & William Stewart at 65 Nicolson Street, Edinburgh was taken over and Thomas was put in charge of the business, trading under the name Thomas A. Mathieson & Co. as plane and edge-tool makers. Thomas's company went on to acquire the Edinburgh edge-tool makers “Charles & Hugh McPherson” and took over their premises in Gilmore Street. In the Edinburgh directory of 1856/7, the business is recorded as being Alexander Mathieson & Son, plane and edge-tool makers at 48 Nicolson Street and Paul's Work, Gilmore Street Edinburgh. The 1851 census Alexander is recorded as working as a tool and plane-maker employing eight men. Later that year Alexander died and his son Thomas took over the business. Under the heading of an edge-tool maker in the 1852/3 Post-Office Glasgow Annual Directory the firm is now listed as Alexander Mathieson & Son, with further entries as "turning-lathe and vice manufacturers". By the early 1850s, the business had moved to 24 Saracen Lane. The directory for 1857/8 records that the firm had moved again only a few years later to East Campbell Street, off the Gallowgate area, and that through further diversification was also manufacturing coopers' and tinmen's tools. The ten-yearly censuses report the firm's growth in 1861 stating that Thomas was a tool manufacturer employing 95 men and 30 boys; in 1871 he had 200 men working for him and in 1881 300 men. By 1899 the firm had been incorporated as Alexander Mathieson & Sons Ltd, even though only Alexander's son Thomas appears ever to have joined the firm so the company was still in his fathers' name. In September 1868 Thomas Mathieson put a notice in the newspapers of the Sheffield & Rotherham Independent and the Sheffield Daily Telegraph stating that his firm had used the trade-mark of a crescent and star "for some time" and that "using or imitating the Mark would be proceeded against for infringement". The firm had acquired its interest in the crescent-and-star mark from the heirs of Charles Pickslay, the Sheffield cutler who had registered it with the Cutlers' Company in 1833 and had died in 1852. The year 1868 seems also to be the one in which the name Saracen Tool Works was first adopted; not only does it figure at the foot of the notice in the Sheffield press, it also makes its first appearance in the firm's entry in the Post-Office Glasgow Annual Directory in the 1868/9 edition. As Thomas Mathieson's business grew, so too did his involvement in local public life and philanthropy. One of the representatives of the third ward on the town council of Glasgow, he became a river bailie in 1868, a magistrate in 1870 and a preceptor of Hutcheson's Hospital in 1878. He had a passion for books and was an "ardent Ruskinian". He served on the committee handling the bequest for the setting up of the Mitchell Library in Glasgow. When he died at Coulter Maynes near Biggar in 1899, he left an estate worth £142,764. Company's later years: Both Thomas's sons, James Harper and Thomas Ogilvie were involved in the continuing life of the firm. James followed in his father's footsteps in becoming a local public figure. He was appointed Deputy Lieutenant of the County of the City of Glasgow and was made a deacon of the Incorporation of the Hammermen of Glasgow in 1919. His brother Thomas Ogilvie was recorded as tool manufacturer and employer in the 1911 census. Thomas Ogilvie's son Thomas Alastair Sutherland Ogilvie Mathieson was born in 1908 took a rather different approach to engineering, however, by becoming a racing driver. In 1947 he wed the French film actress Mila Parély. The firm had won many awards at world fairs for their goods. At the Great Exhibition, London, 1851. Prize medal for joiners' tools in the class of Cutlery & Edge Tools, Great London Exposition, 1862. Prize medal honoris causa. International Exhibition, Melbourne, 1880. Gold medal International Exhibition of Industry, Science and Art, Edinburgh, 1886. Prize medalThe firm of Alexander Mathieson & Sons was one of the leading makers of hand tools in Scotland. Its success went hand in hand with the growth of the shipbuilding industries on the Firth of Clyde in the nineteenth century and the emergence of Glasgow as the "second city of the Empire". It also reflected the firm's skill in responding to an unprecedented demand for quality tools by shipyards, cooperages and other industries, both locally and far and wide.Jack or Smoothing Plane Size of iron 2 1/4 inches wide.Has GN inside a W stamped for (A Mathieson & Son Glassgow.)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, jack plane -
Flagstaff Hill Maritime Museum and Village
Caulking Tool
Double crease iron 2�" Flat head Maker Mathieson. Length 175mm flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village