This glass milk bottle was manufactured and used mid to late 1900's (1834 Victorian dairy industry was founded) up until the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under the house at 1 Beauty Ave., Mt BeautyThis heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottle along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a half pint capacity and is made from "clear" glass. There are other milk bottles that have a "green" tint in them and this tint was to protect the contents from sun damage. This thick glass bottle to contain milk required its thickness because of the extensive handling before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the top half of this bottle is "MILK" and opposite "HALF PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base is "2 M" underneath this "8/11" and underneath is "ISM -169"glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles

Sterling Circa 1768 Paul Revere Reproduction Bowl manufactured by Shreve Crump & Low Co. Currently there is no information about the 150th Field Artillery visit to Bendigo in 1942 although Defence manufacturing in Bendigo has a long history with Thales continuing to produce machinery and vehicles on the original site of the Ordnance Factory which began operating in 1943.Large engraved silver bowl. Presented to / The City of Bendigo / By the Officers and Men / of the / 150th Field Artillery Army of the United States / In Grateful Remembrance of the Warm Hospitality extended to them / By the Citizens of Bendigo / In February 1942 Underside; Shreve, Crump & Low and Co/ sterling / 809 by / P. Revere / Boston 1768 / Sons of Liberty / reproductioncity of bendigo commerce

In 1974, the Royal Blind Society established within it's manufacturing division a facility to build high quality tandems for blind and partially sighted members of its sports club. By the end of 1978, the manufacturing division expanded and a new series of high quality, hand built racing cycles were developed to suit the individuals needs of the cycling enthusiast. A demand in the bicycle hire industry prompted the development of a strong universal bicycle and the new 24" Mixti family cycle was born. By 1979 the Royal Blind Society was manufacturing both family bicycles and tandems for the bicycle hire industry in N.S.W., Victoria and the A.C.T. Both cycles received an enthusiastic reception, so much so, that in 1982 they were the first bicycle manufacturer to win an Australian Design Award. This Mitchell bicycle was donated by the Deacon family whose son Paul worked at Mitchell Manufacturing during this time.1 x mens bicycle frame and tyres painted white with gold letteringMitchell Plate attached to cross bar: This Mitchell Bike was assembled by Paul Deacon (1965) Enfield Blind Society NSWroyal blind society of new south wales, mitchell manufacturing

8686.1 - Leather bound book with brown, green and red colouring on the cover. The word " LEDGER" was printed on the spine in gold.- LEDGER - When re-ordering qute register no____ - / /192_ - NORMAN BROS. - MANUFACTURING STATIONERS, PRINTERS AND IMPORTERS - 60-62 ELIZABETH STREET - Telephones: 6781 and 6782 - MELBOURNE

Widows are sitting around chatting in the club rooms at Legacy House next to a table of craft items. This was the one of the Annual Art and Craft Exhibitions that was run by the widows club. The items could be sold at trading tables and at the table outside Legacy House during Badge Week in September to raise funds. Names unknown.A record of the type of activities Legacy provided as a social outlet for widows. Colour photo of a craft exhibition at Legacy House.Very faint "July 88" in pencil. "Legacy House Club Rooms, 293 Swanston St" and "Crop" in black pen with lines denoting areas to crop. This paper manufactured by Kodak.widows, craft, activities

Councils use property values to calculate how much each property owner pays in rates. This can give us some insight to property values within the municipalities. Receipts have been recorded by Receipt No, Date, Name and Riding. The subdivisions at that time which which were proclaimed by Order-in-Council on 22nd May 1917, were North Riding, Moorabbin Riding, Cheltenham Riding, and South Riding.Brown suede and Black linen bound book with Rates Cash Book Moorabbin Shire in gold text along the spinePrinted on white rectangular sticker in black ink: ARNALL & JACKSON/ Engravers and Lithographers/ PRINTERS/ and/ MANUFACTURING STATIONERS/ 478 Collins Street/ MELBOURNE/ No.B 33325 / 2/10/18 rates, ridings, moorabbin, municipality

Councils use property values to calculate how much each property owner pays in rates. This can give us some insight to property values within the municipalities. Receipts have been recorded by Receipt No, Date, Name and Riding. The subdivisions at that time which which were proclaimed by Order-in-Council on 22nd May 1917, were North Riding, Moorabbin Riding, Cheltenham Riding, and South Riding.Brown suede and Black linen bound book with Rates Cash Book Moorabbin Shire in gold text along the spinePrinted on white rectangular sticker in black ink: ARNALL & JACKSON/ Engravers and Lithographers/ PRINTERS/ and/ MANUFACTURING STATIONERS/ 478 Collins Street/ MELBOURNE/ No.B 27676 / 1/8/19rates, ridings, moorabbin, municipality

C Marks & Co were retailers and manufacturing Jewellers situated at the corner of Sturt and Lydiard Streets, Ballarat.Pocket watch by C. Marks and Co,horology, pocket watch, c. marks & co.

A mass produced utilitarian item made for domestic decorative use. No history or manufacturing provenance currently available.The subject item at this time cannot be associated with an historical event, person or place, provenance is unknown. The item is assessed as a collection asset as it is believed to have been produced after 1910 and before 1950.Container of pressed metal. The container has a broad, thin lip, and its round body flares outwards towards base, then tapers inwards to a short heel. A loop holding a metal ring is attached to the side, near the top. A decorative geometrical transfer pattern in blue and cream covers the body and inside of the lip. In the centre of one side is a round frame with the portrait of an Egyptian woman within.warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, flower vase, decorative object, tin vase

Circa 1930s cyclists' numbers were manufactured in plastic material and attached to the riders' back with safety pins.Provides examples of early rider numbers and material used at that timeGeelong West Cycling Club storage box containing plastic squares of cyclists' numbers. Includes cyclist numbers from 1-100. The wooden box has a medal handle on the top of the box and a metal clip securing the lid to the box. "G.W.C.C. /Riders Numbers"geelong cycling club, geelong west cycling club, cyclists numbers, storage box

Stanley Works Pty Ltd took over Turner Manufacturing, Nunawading, in 1970. They closed their doors in 1992.Coloured photo of Stanley Works Pty Ltd building, with three signs - Stanley, Stanley Hardware, Hardware Divisiontools, stanley works pty ltd, manufacturing industry

Annual reports for the Sydney Industrial Blind Institution, including a price list and catalogue of items manufactured by the workers.1 volume, illustrationssydney industrial blind institution

Car was based on a Lloyd motor corporation vehicle, first manufactured in Frankston, Victoria, between 1949 and 1953Built on request of the then Prime minister, Ben Chifley, that Holden build an inexpensive "workingman's car". The Lloyd was Laurence Hartnetts idea of this, and commenced to develop the car The car is powered by a 2 cylinder, 4 stroke horizontally opposed engine of 600 cc capacity.Green 2 door Estate Wagon with vinyl roof and timber window surroundsInsignia badge on bonnet centre, Lloyd Hartnett across grille top vehicle, estate, hartnett, car

high quality race sulky manufactured by Royal Speed, Adelaide. Royal Speed Sulky, Pinevale Stud Hickory shafted , chromed metal undercarriage and fittings. Wire spoked wheels with rubber inflatable tyres. Yellow frame with blue seat.Pinevale Studtrotting, sulky, royal speed, pinevale stud

Australian mens shirt from the formal uniform for the Sydney 2000 Olympic Games. Manufactured by Ganton Shirts.Green button down shirt with Olympic rings and SYDNEY 2000 on breast pocketSYDNEY 2000fashion, woolmark company ganton shirts, sport, the woolmark company 2000 australian olympic display - exhibition (21/12/2001 - 24/05/2002), sydney 2000 olympic games

Brandon horse bit used on horse tackle during 19th and 20th centuries and manufactured by Holden and FrostEarly object used during c1900 retailed by Holden and Frost for military agricultural and civilian useTwo nickel plated rings held together with two barsequine, military, agriculture, civilian 1900, horse bit

Footprint Tools is a hand tool manufacturer based in Sheffield, England. In 2014 most of their hand tools were still made in Sheffield at the Footprint factory. Footprint Tools can trace its manufacturing history as far back as the 1760s when Alfrid Ridge & Sons was established as a manufacturer of woodworking tools. Ridge was bought by the current owning family in 1932. The Footprint brand originates from 1875 when Thomas R Ellin, a member of a cutlery manufacturing family, started a tool manufacturing business under the brand "Footprint". This subsequently became known as Thomas R Ellin (Footprint Works). This company was bought by the current owning family in 1948 and began to manufacture a range of tools under the Footprint, Domino, Climax, John Bull, and Clinker brands. During World War 2 the divisions of the business were engaged in manufacturing hand tools for British and Commonwealth forces. After the war Footprint continued to grow, manufacture, and expand its range of hand tools for the professional tradesman. In 2008 Footprint moved to a larger factory and invested in new forging equipment, but this process was interrupted by a global recession, and Footprint was unable to generate enough business to cover the cost of the upgrades. In early 2009 the company was forced to liquidate and lay off its staff to pay creditors. The Jewitt family retained the brand and intellectual property, and later that year revived the company under the name Footprint Sheffield and began producing a smaller range of products at first. With the same family of owner-managers, now run by the fourth generation, in 2015 Footprint continues to manufacture most of their products in Sheffield, England, and exports worldwide.This item gives us a look into the history of the beginnings of an early company that made tools in Sheffield England and is still producing tools today.Ring Auger, Double Twist with Lead Screw, bit 1" with round shaft Imprinted 'footprint' trademarkflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Sands and McDougall Pty Ltd were manufacturing stationers established in all states of Australia. In Melbourne the manufacturing business was located in Spencer Street. The company published annual directories of residents and businesses in Australia from 1857 to 1974 and these directories today are highly sought after by genealogists and researchers. This directory for 1946 came from th archives of the Warrnambool Standard newspaper. This book will be of considerable use to researchers and those wanting family information regarding Victorian and Canberra residents and their addresses in the 1940s. This is a directory of 2416 pages. The front and back covers and the spine binding are missing. The directory contains advertisements for Victorian and Canberra businesses, an index to streets in Melbourne and suburbs, an index to residents and businesses in Victoria and Canberra under suburb headings, and an alphabetical section of residents’ names.sands & mcdougall, history of warrnambool