Metal toe shape with 6 holes in top, cut out at point of toe.Toe and heel joined by adjustable metal rods. Metal heel extender with holes on sides to put metal rod into so as to adjust length.Sky-line Made in England stamped under heel extender

Hollowed wooden toe puff with 5 carved grooves. Metal spring attached with hinge to toe puff and joined to wooden heel ballMade in Germany ink stamped on hollowed toe puff

Hollowed polished wooden toe puff joined with tight metal spring to wooden heel ball1/325/3 ink stamped on hollowed toe puff

Polished, hollowed wooden toe puff with 5 carved grooves . Tight metal spring hinged to toe puff and joined to wooden heel ball. Screw on instep side of toe puff holding hingeMade in Germany ink and 123/8-9 stamped under hollowed toe puff

098?? stamped on instep. Removable instep cast ? 241 on foot cast with locating grooves for instep cast. Locating hole on under foot arch

Hand made black leather shoes with leather bow at instep. Short strap with button hole. Black bakelite button on metal ring rivetted to shoe. Size 11 stamped on sole. Leather sole and heel nailed to shoe. Fine machine stitching on top edges of shoe and down to sole from instep.Size 11 stamped on sole

Pair Ladies Black Boots. 9 black Bakerlite and metal buttons with matching stitched eyelet button holes. Black leather sole with nailed black leather heel, slightly worn. Decorative stitching and punching across toe with slight scratching of leather on toe. Button hole tab inner lining of black leather. Inner lining of material . Inner sole of split tan leather. Solid inner toe and heel puffs with slight wear on external toe and heel puff leather.Oval stamp on sole with "TD and ALL LEATHER". Size 2 stamped on sole instep.

Used by Dianne McIntyre's grandmother c 1910 and possibly by an earlier generation too.Antique wooden handled metal fruit pitter with bevilled edges on both sides of the wedge shaped blade. Usually used for pitting peaches or apricots.D CARMICHAEL is stamped on the scoop.kitchen equipment, domestic equipment

Used by Harold and Jean ParkerAntique wooden mantle clock made in USA with an Australian made Duff brand oak case with a plain angled top with round shaped pillar styled sides. It has a white ceramic dial face with black digits and black metal hands. The dial is covered by a glass and gold trimmed covering that may be opened on the right side. Inside the case is a Waterbury Clock Co of USA key and the internal workings are visible. It is not in working order.Duff brand brass plaque on back of cover. Key has Waterbury Clock co USA stamped on it.clocks, timepieces, clock components, clock keys, mantle clocks

From the home of Mr and Mrs Parker. belonged to Mr Parker senior.Ornate carved dark timber mantle pendulum clock with brass clock face surround. Has a white dial with black roman numerals and black metal hands. The Ansonia Clock Co. Manufacturers USA Trademark A is printed on the face. It has an ornate brass pendulum and the internal workings are visible. The very ornately embossed in gold decorated glass front opens. There are two spirit plumb levels inside, one is aluminium metal and is attached to the wall, the other is brass with Wm Hunt Level Co with a triangle on top stamped on it. There is a brass key No.7 with two holes on the top of the winder handle. The Ansonia Clock Co. Manufacturers USA Trademark A. printed on the dial. Wm Hunt Level Co. stamped on the level.clocks, timepieces, mantle clocks, clock components, clock keys

Worn on a ladies belt for decoration. It could be Japanese as there are similar pieces on the internet.An antique round hand painted Japanese style ladies ceramic belt buckle with two birds, rock cliffs, flowers, two waterfalls and a mountain which could represent Mt Fuji in the background. It is mounted on a brass surround and the back has a hook for clasping to the other end of the belt and a thin metal bar. There is a small X signature stamped under the hook.A small X stamped on the back.belt buckles, belt accessories

Made in the early 20th centuryAn iron handmade woodworking tool used to shave wood or metal tools and instruments to size and is used for detailed work. It has a concave blade and two handles. 'RH' is stamped on the right handle. 'RH' stamped on the right handle.tools, woodworking tools, woodcarving tools, handtools, iron

A flat straight metal woodworking tool with two wooden line patterned handles used to remove surplus large chunks of wood and taper the sides of timber for floorboards, paneling and such before planing them. It can be used to to fashion tool handles, wooden sculptures stool legs or wheel spokes. The final finishing on such work was done by a Spoke Shave tool which we also have in our collection.Stamped on the blade is a horse head with the manufacturer's name Hale Bros Sheffield England below.woodcarving tools, drawing knives, shaves, handtools, iron

A tool used in the early 20th Century.A two piece metal wrench with an adjustable chain that is used to tighten around metal objects. It has a double triangular pointed grooved jaw grip, a handle and chain attached. They provide safe, reliable and powerful torque. The dual reversible jaws allow ratchet action in both directions without removing the chain wrench from the pipe.Stamped on the handle - Drop forged from bar steel by J.H. Williams & Co, Brooklyn, NY. On a grip jaw at the top is stamped - No 1, 'W' in a triangle shape, Patented Oct.4 '81, Dec.13 '81, Mar. 14 '82, Sep.25 '83, Feb.14 '88 and Brook Chain Wrench at the bottom.tools, equipment, hand tools, wrenches, steel

Used in the 19th centuryA bill hook or axe-handled slasher which is an axe-handled forged metal blade with a strong curved sharp axe like edge and a straight secondary edge on the back. It has a broken wooden handle with steel or a tang which passed through the handle if it were still attached. There is stamped on the blade near the handle join - '2'. The original finish of the blade would have been, 'Japanned' which is baked black enamel. It was used to cut back scrub, small trees and woody vegetation in the 19th century.'2' stamped on the blade near where it joins the handle.slashers, cutting tools, bill hook slasher, gardening tools, agricultural tools

Used by Wandin Sebire for an unknown purpose.An unusual split headed long thin spade with a wooden handle Four rivets attach the head to the handle. At the top the handle is screwed to the metal. It was used by Wandin Sebire, probably for a special purpose - it is not known for what. Spades are usually used for turning soil by pushing against the blade with the foot. Used in the early 20th century.Stamped on the metal handle - '2' and 'S & C Ham'. 'Parkes & Co. Birmingham no. 2'.gardening spades, spades, shovels, gardening tools

A metal King Eye slasher with an unusual rounded 'U' shaped open blade and a wooden handle. On the blade is stamped, 'King Eye, PATT NO, 3868 A & F PARKES & CO BIRMINGHAM England'. It was efficient for clearing thin and dense low-lying scrub or bush where an axe would be too clumsy. It is similar to a billhook, but with a longer handle.'KING EYE, PATT NO, 3868 A & F PARKES & CO BIRMINGHAM ENGLAND'tools, agricultural equipment, agricultural tools, slashers, gardening tools

Detached sector panel from upper lantern. The lens segment is one of a pair of freestanding panels that formerly stood on a platform in the upper lantern room on either side of a small fixed light. The platform rested above the 1860/62 Chance Bros. first order, fixed lens and could be accessed by a ladder. The two sector lens panels were each set in a bronze frame and comprised a curved wider (belt) piece in the centre with nine curved, slim line pieces above and below it (19 pieces in total). The belt aligned with the light source to provide optimal focus and range. The panels, the light and the platform were installed in 1934 to upgrade the original optical system with red warning lights. Fitting them above the lantern was a convenient and inexpensive way to do this, with each lens panel set up behind a red glass panel to project a red sector to the seaward over to Cape Howe and the Western Shore. The two sectors are likely to be Chance Bros. by manufacture although they do not appear to bear the maker’s name. This is probably because Chance Bros. typically fixed metal plaques to their apparatus and tended not to stamp smaller components such as their lens frames. It could possibly indicate that the two sectors are former components of a larger system, i.e. another lens. This can easily be confirmed by closely inspecting the bronze frames. A series of holes on the frame would indicate that ‘they would have bolted to other panels to make a larger lens assembly’. The absence of holes would confirm that ‘they were made specifically to stand alone’. The sector panels were removed from the Gabo lantern in February 1992. At some point after their removal, they were found in boxes marked with ‘Ince Pt.’, however it is thought that Ince Point lighthouse ‘never had … stand alone sectors’. The panel in the Gabo Island collection is one of two segments discovered at the Eden Killer Whale Museum in about 2007. One section was repatriated to Gabo Island and the other was to go to Smoky Cape Lighthouse in northern NSW. The Gabo lens segment has first level contributory significance for its historic value and provenance to the lantern room. It is recommended that Parks Victoria/AMSA seek to return the Smoky Cape segment to Gabo Island and reunite the sector panels.The Gabo lens segment has first level contributory significance for its historic value and provenance to the lantern room.Section of a lens from a lighting apparatus , rectangular louvers of glass enclosed in a metal frame.

Cudgewa Line -The Cudgewa railway line opened in stages between 1889 and 1921. The first section from Wodonga to Huon opened on 10 September 1889. It was extended to Bolga on 18 July 1890, Tallangatta on 24 July 1891 and then to Shelley on 13 June 1916. Shelley was the highest station in Victoria. It extended further on to Beetomba on 10 April 1919 and finally reached Cudgewa on 5 May 1921. The line had 1 in 30 grades and trestle bridges that have been heritage listed. In 1919, the line was used to carry materials for the construction of Hume Weir, and three years later a spur line connecting Ebden to the weir was opened. In the 1960s, Cudgewa became the railhead of materials for the Snowy Mountains Scheme. The last passenger service from Wodonga to Tallangatta ran on 30 September 1961. The turntable and passenger platform at Cudgewa were abolished in 1976. These stamps were used by Joh Murray who for many years worked with Victorian Railways based at Wodonga.A leather pouch with belt and lock. It bears a metal name tag inscribed with name of railway station. The pouch contains 3 station stamps, a date stamp and 2 carriage keys.On pouch WODONGA On stamps: BONEGILLA 1470/ EBDEN 1471/ BANDOLIER 1473cudgewa rail line, victorian railways, closed victorian railways, railway stamps

Official seal of the Wodonga Sewerage Authority. Manually operated to imprint the official seal on documents.Local and state significance due to its direct association with Wodonga in Victoria and the dated patent.Heavy black painted metal object with a handle and the official seal of the Wodonga Sewerage Authority, used to manually imprint "WODONGA SEWERAGE AUTHORITY" on documents. In working order. Patent dated to July 13 1920 - stamped on the end of the metal handle. "ROESZLER'S / 429 LT COLLI..." "...WER" painted in white on one side - the first two letters are worn and incomplete but appears to have been "SE" for "SEWER" "...PAT. July 13 1920"local government, waterworks, wodonga, water & sewerage trusts, sewage

Sarah Coventry Pty. Ltd. was a North American jewellery company that was established in 1949 by the Stuart family as part of Emmons Jewelry, Inc. It began operations in England and Australia in 1968, and in Australia it moved from Carlton in Melbourne to Wodonga in 1969. The premises were originally on High St. in Wodonga, but a new warehouse was built in Melbourne Rd. later in 1969. It was a direct selling jewellery business using a party-plan model similar to Tupperware and Avon. The sales reps or 'Hostesses' were provided with jewellery samples in demonstration kits, which they displayed at jewellery parties in their homes. The designs for jewellery such as brooches, necklaces, earrings, chokers and bracelets were purchased from freelance designers and jewellery manufacturers rather than in-house designers. In 1979 Sarah Coventry Pty. Ltd. in Wodonga was bought by three Australian businessmen, including Wodonga local Jim Sawyer, and continued to sell jewellery under the name "Sargem Pty. Ltd”, for several more years in the 1980s. As part of the Sarah Coventry collection, the pin has local significance with the decentralised commercial development of regional centres such as Wodonga in NE Victoria, as well as national and international significance from the perspective of social and economic developments for women after World War II. The direct selling party-plan business model Sarah Coventry was based on is also considered the first of its kind for jewellery.Small rectangular gold metal pin with a small pearl inlay on the proper left side for 15 years service. The 10 K stamp on the back surface suggests it is 10 karat gold.The abraded areas on the clasp on the back expose underlying silver coloured metal indicating that the clasp is plated. "Sarah / SC / 15 / YRS / Coventry" on the front surface. "cTo ® / .... 10K" stamped in the back surface on the lower proper left side indicating 10 karat gold. The (®) symbol indicates that the manufacturer's mark is federally registered with the US Patent and Trademark Office. The 'cTo' is the trademark by O. C. Tanner Jewelry Co. in Salt Lake City, U.S.sarah coventry, jewellery, wodonga, costume jewellery, vintage fashion jewellery, pin, jewellery pins

Sarah Coventry Pty. Ltd. was a North American jewellery company that was established in 1949 by the Stuart family as part of Emmons Jewelry, Inc. It began operations in England and Australia in 1968, and in Australia it moved from Carlton in Melbourne to Wodonga in 1969. The premises were originally on High St. in Wodonga, but a new warehouse was built in Melbourne Rd. later in 1969. It was a direct selling jewellery business using a party-plan model similar to Tupperware and Avon. The sales reps or 'Hostesses' were provided with jewellery samples in demonstration kits, which they displayed at jewellery parties in their homes. The designs for jewellery such as brooches, necklaces, earrings, chokers and bracelets were purchased from freelance designers and jewellery manufacturers rather than in-house designers. In 1979 Sarah Coventry Pty. Ltd. in Wodonga was bought by three Australian businessmen, including Wodonga local Jim Sawyer, and continued to sell jewellery under the name "Sargem Pty. Ltd”, for several more years in the 1980s. As part of the Sarah Coventry collection, the pin has local significance with the decentralised commercial development of regional centres such as Wodonga in NE Victoria, as well as national and international significance from the perspective of social and economic developments for women after World War II. The direct selling party-plan business model Sarah Coventry was based on is also considered the first of its kind for jewellery.Small rectangular gold metal pin for five years service with a faceted pink stone inlay on the proper left side, the name and initials of Sarah Coventry in the central area and three flowers on the proper right side. The 10 K stamp on the back surface suggests it is made of 10 karat gold. Abraded areas on the high points of the clasp on the back surface expose underlying silver coloured metal indicating that the clasp is plated."Sarah / SC / 5 YRS / Coventry" on the front surface. "® cTo / 10 K" stamped into the back surface on the lower proper left side, indicating 10 karat gold. The (®) symbol indicates that the manufacturer's mark is federally registered with the US Patent and Trademark Office. The 'cTo' is the trademark by O. C. Tanner Jewelry Co. in Salt Lake City, U.S.sarah coventry, jewellery, wodonga, costume jewellery, vintage fashion jewellery, pin, jewellery pins

Sarah Coventry Pty. Ltd. was a North American jewellery company that was established in 1949 by the Stuart family as part of Emmons Jewelry, Inc. It began operations in England and Australia in 1968, and in Australia it moved from Carlton in Melbourne to Wodonga in 1969. The premises were originally on High St. in Wodonga, but a new warehouse was built in Melbourne Rd. later in 1969. It was a direct selling jewellery business using a party-plan model similar to Tupperware and Avon. The sales reps or 'Hostesses' were provided with jewellery samples in demonstration kits, which they displayed at jewellery parties in their homes. The designs for jewellery such as brooches, necklaces, earrings, chokers and bracelets were purchased from freelance designers and jewellery manufacturers rather than in-house designers. In 1979 Sarah Coventry Pty. Ltd. in Wodonga was bought by three Australian businessmen, including Wodonga local Jim Sawyer, and continued to sell jewellery under the name "Sargem Pty. Ltd”, for several more years in the 1980s. As part of the Sarah Coventry collection, the pin has local significance with the decentralised commercial development of regional centres such as Wodonga in NE Victoria, as well as national and international significance from the perspective of social and economic developments for women after World War II. The direct selling party-plan business model Sarah Coventry was based on is also considered the first of its kind for jewellery.Small rectangular gold metal pin with a faceted pink stone inlay on the proper left side and a faceted clear stone on the proper right side. Two raised flower motifs on the proper right side. The 10k stamped on the back surface suggests it is made of 10 karat gold.The abraded areas on the clasp on the back expose underlying silver coloured metal indicating that the clasp is plated."Sarah / SC / 10 YRS / Coventry" raised inscription on the front surface. "® cTo / 10 K" stamped on the lower proper left side of the back surface, indicating 10 karat gold. The ® symbol indicates that the manufacturer's mark is federally registered with the US Patent and Trademark Office. The 'cTo' is the trademark by O. C. Tanner Jewelry Co. in Salt Lake City, U.S.sarah coventry, jewellery, wodonga, costume jewellery, vintage fashion jewellery, pin, jewellery pin

Sarah Coventry Pty. Ltd. was a North American jewellery company that was established in 1949 by the Stuart family as part of Emmons Jewelry, Inc. It began operations in England and Australia in 1968, and in Australia it moved from Carlton in Melbourne to Wodonga in 1969. The premises were originally on High St. in Wodonga, but a new warehouse was built in Melbourne Rd. later in 1969. It was a direct selling jewellery business using a party-plan model similar to Tupperware and Avon. The sales reps or 'Hostesses' were provided with jewellery samples in demonstration kits, which they displayed at jewellery parties in their homes. The designs for jewellery such as brooches, necklaces, earrings, chokers and bracelets were purchased from freelance designers and jewellery manufacturers rather than in-house designers. In 1979 Sarah Coventry Pty. Ltd. in Wodonga was bought by three Australian businessmen, including Wodonga local Jim Sawyer, and continued to sell jewellery under the name "Sargem Pty. Ltd”, for several more years in the 1980s. As part of the Sarah Coventry collection, the gold toned chain has local significance with the decentralised commercial development of regional centres such as Wodonga in NE Victoria, as well as national and international significance from the perspective of social and economic developments for women after World War II. The direct selling party-plan business model Sarah Coventry was based on is also considered the first of its kind for jewellery.Gold toned metal chain with a rhombus-shaped attachment next to the clasp, with the Sarah Coventry mark stamped on it."SARAH / COV" which is thought to be first used in 1953.sarah coventry, jewellery, wodonga, costume jewellery, vintage fashion jewellery, gold chains

Sarah Coventry Pty. Ltd. was a North American jewellery company that was established in 1949 by the Stuart family as part of Emmons Jewelry, Inc. It began operations in England and Australia in 1968, and in Australia it moved from Carlton in Melbourne to Wodonga in 1969. The premises were originally on High St. in Wodonga, but a new warehouse was built in Melbourne Rd. later in 1969. It was a direct selling jewellery business using a party-plan model similar to Tupperware and Avon. The sales reps or 'Hostesses' were provided with jewellery samples in demonstration kits, which they displayed at jewellery parties in their homes. The designs for jewellery such as brooches, necklaces, earrings, chokers and bracelets were purchased from freelance designers and jewellery manufacturers rather than in-house designers. In 1979 Sarah Coventry Pty. Ltd. in Wodonga was bought by three Australian businessmen, including Wodonga local Jim Sawyer, and continued to sell jewellery under the name "Sargem Pty. Ltd”, for several more years in the 1980s. As part of the Sarah Coventry collection, the gold toned chain has local significance with the decentralised commercial development of regional centres such as Wodonga in NE Victoria, as well as national and international significance from the perspective of social and economic developments for women after World War II. The direct selling party-plan business model Sarah Coventry was based on is also considered the first of its kind for jewellery.Gold toned metal chain from the Sarah Coventry jewellery range with two circular elements and two swirling decorative elements, and a small rhombus-shaped attachment near the clasp with the Sarah Coventry mark stamped on it.. "SARAH COV / MADE IN / CANADA" - The 'SARAH COV' mark is thought to be first used in 1953.sarah coventry, jewellery, wodonga, costume jewellery, vintage fashion jewellery, gold chains

Sarah Coventry Pty. Ltd. was a North American jewellery company that was established in 1949 by the Stuart family as part of Emmons Jewelry, Inc. It began operations in England and Australia in 1968, and in Australia it moved from Carlton in Melbourne to Wodonga in 1969. The premises were originally on High St. in Wodonga, but a new warehouse was built in Melbourne Rd. later in 1969. It was a direct selling jewellery business using a party-plan model similar to Tupperware and Avon. The sales reps or 'Hostesses' were provided with jewellery samples in demonstration kits, which they displayed at jewellery parties in their homes. The designs for jewellery such as brooches, necklaces, earrings, chokers and bracelets were purchased from freelance designers and jewellery manufacturers rather than in-house designers. In 1979 Sarah Coventry Pty. Ltd. in Wodonga was bought by three Australian businessmen, including Wodonga local Jim Sawyer, and continued to sell jewellery under the name "Sargem Pty. Ltd”, for several more years in the 1980s. As part of the Sarah Coventry collection, the gold toned chain has local significance with the decentralised commercial development of regional centres such as Wodonga in NE Victoria, as well as national and international significance from the perspective of social and economic developments for women after World War II. The direct selling party-plan business model Sarah Coventry was based on is also considered the first of its kind for jewellery.Gold toned beaded metal chain from the Sarah Coventry jewellery range, with the Sarah Coventry mark stamped on the rectangular clasp. "SARAH COV" - this mark thought to be first used in 1953.sarah coventry, jewellery, wodonga, costume jewellery, vintage fashion jewellery, gold chains

Sarah Coventry Pty. Ltd. was a North American jewellery company that was established in 1949 by the Stuart family as part of Emmons Jewelry, Inc. It began operations in England and Australia in 1968, and in Australia it moved from Carlton in Melbourne to Wodonga in 1969. The premises were originally on High St. in Wodonga, but a new warehouse was built in Melbourne Rd. later in 1969. It was a direct selling jewellery business using a party-plan model similar to Tupperware and Avon. The sales reps or 'Hostesses' were provided with jewellery samples in demonstration kits, which they displayed at jewellery parties in their homes. The designs for jewellery such as brooches, necklaces, earrings, chokers and bracelets were purchased from freelance designers and jewellery manufacturers rather than in-house designers. In 1979 Sarah Coventry Pty. Ltd. in Wodonga was bought by three Australian businessmen, including Wodonga local Jim Sawyer, and continued to sell jewellery under the name "Sargem Pty. Ltd”, for several more years in the 1980s. As part of the Sarah Coventry collection, the gold chain has local significance with the decentralised commercial development of regional centres such as Wodonga in NE Victoria, as well as national and international significance from the perspective of social and economic developments for women after World War II. The direct selling party-plan business model Sarah Coventry was based on is also considered the first of its kind for jewellery.Gold toned metal rope chain from the Sarah Coventry jewellery range, with a small rhombus-shaped attachment at the clasp which has the Sarah Coventry mark on it. "SARAH COV" - stamped on the small rhombus-shaped attachment at the clasp. This maker's mark is thought to be first used in 1953.sarah coventry, jewellery, wodonga, costume jewellery, vintage fashion jewellery, gold chains, sargem

Sarah Coventry Pty. Ltd. was a North American jewellery company that was established in 1949 by the Stuart family as part of Emmons Jewelry, Inc. It began operations in England and Australia in 1968, and in Australia it moved from Carlton in Melbourne to Wodonga in 1969. The premises were originally on High St. in Wodonga, but a new warehouse was built in Melbourne Rd. later in 1969. It was a direct selling jewellery business using a party-plan model similar to Tupperware and Avon. The sales reps or 'Hostesses' were provided with jewellery samples in demonstration kits, which they displayed at jewellery parties in their homes. The designs for jewellery such as brooches, necklaces, earrings, chokers and bracelets were purchased from freelance designers and jewellery manufacturers rather than in-house designers. In 1979 Sarah Coventry Pty. Ltd. in Wodonga was bought by three Australian businessmen, including Wodonga local Jim Sawyer, and continued to sell jewellery under the name "Sargem Pty. Ltd”, for several more years in the 1980s. As part of the Sarah Coventry collection, the necklace has local significance with the decentralised commercial development of regional centres such as Wodonga in NE Victoria, as well as national and international significance from the perspective of social and economic developments for women after World War II. The direct selling party-plan business model Sarah Coventry was based on is also considered the first of its kind for jewellery. Gold toned metal neckalce with an oval-shaped pendant inlaid with a brown resinous material, which appears to be faux amber. The patent number is stamped on the back of the clasp."Sarah" on the front side of the clasp "PATENT 3427691" on the back of the clasp.sarah coventry, jewellery, wodonga, costume jewellery, vintage fashion jewellery, necklace, necklaces, amber, faux amber

Metal and glass railway signalling lamps were used for communication, safety and lighting by train guards, shunters and signalmen, as well as station staff in the late 1880s to the early 1900s. They were hand operated and used fuel such as kerosene.The railway signal lamp has local significance as part of a set of three lamps donated by a resident of Wodonga who worked for the Victorian Railways. It also has national significance as an example of communication and safety equipment used by the railways in Australia in the late 19th century and early 20th century.Exterior casing of a black painted metal railway signal lamp with circular blue and red glass filters and a turning mechanism on the top under a circular handle. Small copper plate with the letters "A y" stamped on it, on one side of the lamp. "A y"railway lamps, signalling lamp, train signal lamps