Showing 5248 items
matching position
-
Federation University Historical Collection
Notes, Handwritten notes on Bagpipes, Scotland, etc
"After the war Pipe-Major Duncan McLennan, moved to Ballarat and took up a position as cadet instructor and leader of the Ballarat Highland Pipe Band and the Ballarat Ladies Pipe Band. " (Victorian Historical Journal Vol. 85, No. 1, June 2014)Small Handwritten notes on Bagpipes Scotland etc.bagpipes, scotland, kilts, pipe band -
Federation University Historical Collection
Photograph - Photograph - Colour, Pipe Bands on Oval
"After the war Pipe-Major Duncan McLennan, moved to Ballarat and took up a position as cadet instructor and leader of the Ballarat Highland Pipe Band and the Ballarat Ladies Pipe Band. " (Victorian Historical Journal Vol. 85, No. 1, June 2014)Coloured photograph numerous pipe bands lined up on an ovalpipe band, oval, ladies highland pipe band, ladies pipe band, photograph, colour photograph -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, Lakes Post Newspaper, 1/04/1996 12:00:00 AM
An abandoned EPFRG emergency position indicating Beacon set off the alarm in Canberra initiating a full emergency response with helicopter, water police, coastguard and other units involved. The EPFRG was eventually located in a rubbish bin on a private property in Lakes EntranceBlack and white photograph of two Water Policemen Snr Const. Tony Burke and Snr Const. Brian Hall of Paynesville Water Police docked at Lakes Entrance Victoriacoast, defence services, police -
Melbourne Legacy
Letter - Document, letter
00361.1 Application by Mr N Partis (?) of Albert Park for more information on the position of Manager of the Legacy Club Hostel. It lists his experience in WWI and orchard and farm experience. 00361.2 A follow up letter by Mr N Partis (?) providing references.A record of written correspondence regarding job applications in 1943.00361.1 Letter addressed to National service officer in 1943 on white notepaper, lined, black ink handwriting, two hole punched. 00361.2 Letter addressed to L/ E Russell on white notepaper, lined, black ink handwriting, two hole punched.00361.1 "Sent outline of duties 12/2/43" in blue inkresidences, holmbush, holmbush administration -
Ballarat Tramway Museum
Photograph - Tram 34 Hospital Corner, 1950
The photograph shows SEC Ballarat tram No. 34 at Hospital Corner. Item No. 4152 is a Wal Jack photo of the tram almost in the same position. Photo most likely on the same date 19/2/1950, but likely by a different photographer standing alongside. Yields information about tram 34 at Hospital Corner.Black and White print on plain paper.tramcars, sturt st, tram 34, hospital corner -
Federation University Historical Collection
Newsletter, Bandwagon: Ballarat School of Mines Students and Apprentices Association Newsletter, 1994-1999, 1994-1999
The Ballarat School of Mines Students' Representative Council was the governing body of the Association. They were required to carry out the aims and objectives of the Associaton and to establish policies that are approved by referendum. They were required to establish a budget, authorize Association publications, appoint an auditor, appoint a returning officer, nominate representatives for College Committees and ensure that all student groups are adequately represented by providing a position for each department on the S.R.C.. There were also responsible for the employment of Association staff and have a commitment to providing a friendly working association. To be eligible for a position on the SRC a student must have paid their fees (be a financial member) and be nominated by two other financial members from their department.Newsletters of the Ballarat School of Mines Students' and Appentices Association. .8) D. Day edition of the Bandwagon, Interview with Ron Wild, Shane Mattson (SRC President), Student Liaison Officers, Drug use - what to expect, A fair Game - Drugs and sport, contraceptionballarat school of mines, bandwagon, ballarat school of mines students' and appentices association, students' representative council, src, marion nunn, ron wild, judy gersch, craig leigh binder, glenys mcervale, jill elston, aron visser, marion nunn, gary desnoy, shane mattson -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Peaslee pessaries associated with Dr Frank Forster
Stem pessaries were instruments used for rectifying uterine displacement, either ante or retroversion. The pessary consisted of a stem and bulb or ball. The stem was introduced into the vagina, and the bulb rested against the cervix/uteri. An external wire frame could be attached to the bulb. The wire frame would be positioned to press on the pubis, thus keeping the pessary in position in utero. Although this pessary has been recorded as Peaslee's it is very similar in appearance to Thomas's galvanic stem pessaries. Stem pessaries were used in rectifying uterine displacement, either acute or retroversion. A pink tag was attached by string to one of the stems inscribed "Peaslee's/ Uterine/ Stem " "...?TID" on other side.Two Peaslee's intrauterine stem pessaries. Copper single stem pessaries with rounded top, stamped with the number seven on the top.intrauterine device, pessary -
Vision Australia
Equipment - Object, Sensory Tools, a division of Robotron Group, Talking compass, 20
The C2 Talking Compass is a miniature hand-held battery-operated eight-point compass with digitized voice output. At the top of the compass there is the speaker and the activation button. A three-position slide switch on the side is used to switch the compass off (central position) and select one of the two in-built languages or voices. The compass pronounces the eight compass points in clear digitised speech. It represents an excellent mobility tool for an active blind or vision-impaired person. Unobtrusive, light-weight and reliable, it augments it's user's orientation sense, and contributes to his or her safety and self-confidence. The compass relies on 2 x 12V batteries. Weight: 61 grams.1 semi-transparent light-blue oval shape compass with blue nylon, plaited wrist strapassistive devices, orientation and mobility -
Melton City Libraries
Photograph, Melton Urban Fire Brigade, 1970
C.E Barrie was the Urban brigade's first captain. November 19, 1975, Page 2 OBITUARY Ex-Captain C E BARRIE Over 50 firemen attended the funeral of Ex- Captain Edgar Barrie of Melton Fire Brigade who died at the age of 62 on Thursday 16th October, 1975. Edgar was a volunteer fireman for 33 years, all of this service with the Melton Rural and Urban Fire Brigades. He joined the rural brigade in February 1942 was Secretary 1942 until 1965 when he became Captain as position he held until 1973. He was the urban brigade’s first Captain when it was formed in 1970 and held this position until 1971. The fire service runs in the Barrie family, brother Bon was Captain of the rural brigade from 1953 to 1965 relinquishing the position to become Group Officer of the Mt Cottrell Group, a position he still holds. Another brother Tom has been a member since 1941, nephew Peter has been a member since 1962 and Edgar’s son Vivian has been a member since 1971. Firemen, led by Snr. A/C/O Max Taylor, A/C/O Harry Rothsay, R/O Arthur Haynes and retired R/O Jim Dinsdale formed a guard of honour at the church and cemetery. A/C/O Rothsay read the Fireman’s Funeral Ritual at the graveside. Edgar who was a farmer, leaves a wife and four children. Sympathy is extended to them in their loss. Six members from the Melton Urban Brigade including Captain C.E Barrie, Secretary Dale Blampied, Lieutenant Steve Hirt, Apparatus Officer Graham Quick and Foreman Barry Sherwell.local identities, emergency services -
Lara RSL Sub Branch
Print, The order of wearing Australian Honours and Awards
The Governor General of Australia has, at irregular intervals, notified for general information the positioning of the wearing of Australian Orders, Decorations and Medals in the Commonwealth of Australia Gazette. The Order of Wearing Australian Honours and Awards was last published in 2007, and replaced the previous list published in 2002.Prior to 2002, the lists were named the Australian Order of Precedence of Honours and Awards.[2] Rectangular shaped glass covered picture frame showing the order of wearing the Honours and Awards The order of wearing the Honours and Awardshonours, awards, lara r.s.l. -
Port Melbourne Historical & Preservation Society
Photograph - Port Melbourne Football Club, 2nd XVIII, A H Williams, 1935
Sixteen of the 25 individuals are known but only four are specifically identified by position. W MATHEWS (1st left second row from rear); Nat ELDER (beside MATHEWS); H BARNES (Middle second front row); Choota BALMAN (on BARNE's left)B&W photo of Port Melbourne Football Club 2nd 18 team and officials from 1935. Presented to his Worship, CR. A. ROGERS, President, in appreciation of services rendered.sport - australian rules football, george alexander rogers, mayors, w mathews, nat elder, a bills, alex rogers, graham 'nuts' nugent, w payne, w cornwaithe, s tymms, h compton, h barnes, choota balman, h smith, marshall, d spence, s ware, m larwood, port melbourne railway united football club, port melbourne junior football club -
Port Melbourne Historical & Preservation Society
Document - Handbill inviting citizens to part in the City of Port Melbourne 'wake' photograph, Historic Community Photograph, Jun 1994
The photo was commissioned by the City of Port Melbourne and shot by photographer John KIRBY from the height of a cherry picker positioned beside the former Quinn's Hotel. Put on exhibition at various festivals for identification of those in photo. Approximately 280 people and a dog took partCity of Port Melbourne handbill inviting citizens of Port to 'take part in the last photo of the city' and attend the pre-amalgamation activities at the town hall 26 June 1994. Pale blue, A5port melbourne town hall, celebrations fetes and exhibitions, amalgamation, john kirby, local government - city of port melbourne -
Melton City Libraries
Document, Envelope addressed to E.W Barrie, Unknown
Ernest “Bonnie” Wesley Barrie was a member of the Presbyterian Board of Management for more than 25 years in which he held positions of Honorary Secretary and Treasurer, Board member of the Parish Council and Member of the Committee of Management. He was a Sunday school teacher 1933.Envelope addressed to E.W Barrie, treasurer of Scots Church from Bacchus Marsh and District War Hospitalchurches, local identities -
The Beechworth Burke Museum
Animal specimen - Eastern Meadowlark, Trustees of the Australian Museum, 1860-1880
Eastern Meadowlarks live throughout the grasslands and farms in eastern North America. On the ground, their brown-and-black dappled upperparts camouflage the birds among dirt clods and dry grasses. When in flight or perching, they reveal bright-yellow breasts and bellies, and a striking black chevron across the chest. The Eastern Meadowlark has a diet which consists of mainly insects and seeds. These birds forage by walking on the ground and taking insects and seeds from the ground and from low plants. In winter, these birds may choose to forage in flocks. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum in Sydney and the National Museum of Victoria (known as Museums Victoria since 1983), as well as individuals such as amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century. This Eastern Meadowlark has a yellow breast and throat with black plumage in the shape of a 'V' on it's throat. This particular specimen has a long pointed bill which is in the shape of a spear. The crown of the bird is a dark brown and it also has lighter brown/yellow stripes on the brow. The back, wings, and tail are light brown with dark brown mottling. This specimen stands upon a wooden platform and has an identification tag tied around its leg. The legs are long and the specimen has been styalised in an upright position.Label: [illegible] Ant-Eating Thrush / Catalogue, Page 66. /taxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, reynell eveleigh johns, bird, american birds, eastern meadowlark, meadowlark -
The Beechworth Burke Museum
Animal specimen - Great Crested Grebe, Trustees of the Australian Museum, 1860-1880
The Great Crested Grebe is a medium to large sized bird located in Australia, New Zealand, Europe, Asia and in parts of Africa. They reside in large bodies of fresh water and are renowned for their elaborate mating dances. When breeding, the Great Crested Grebe has tawny cheek "fans" and black crests; however, in the non-breading seasons the plumage of this bird turns white. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum and the National Museum of Victoria, as well as individuals such amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century. This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century.The Great Crested Grebe is a medium to large sized bird. It typically has cheek "fans" on the sides of the face and elaborate crest feathers which are shed after breeding, as is the case for this specimen. This bird is in a tall standing position with its neck stretched upwards and facing left. The small dark eyes have been made from glass and a large pointed bill. It has a metal tag tied to its left leg engraved with the numbers "4401". The skin surrounding the toes are flat which assists the bird when swimming.On tag 4401taxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, reynell eveleigh johns, great crested grebe, bird -
Bendigo Military Museum
Photograph - GROUP PHOTOGRAPH KAPOOKA 1967, Aust Army, c1967
Item in the collection re Tony Cornelius, refer Cat No 1874.2 for his service details.Group photograph of 6 Pl & Staff A Coy 1 RTB KAPOOKA November 1967. They are in four rows, seated and standing. The man in the centre of the front row is holding a cane under his left arm. On his left is a Corporal. Between them is a little statue of a man, opening his outer shirt revealing Infantry crossed swords T-shirt. The statue has a title at it's base which appears to read "Rec Fitness". The photo is mounted in a folding cardboard cover and one the cover are the names and positions of the men.photo, platoon a.coy, vietnam war -
Bendigo Military Museum
Equipment - TRAINING STAND FOR .303 IN LEE ENFIELD RIFLE, 21 Bn. AIF, c1915-1918
This is a WW1 stand for mounting a .303 rifle, to train soldiers in shooting.This device consists of two parts; 1. Top part has an adjustable 'arm' . At the end of each arm is a leather covered 'U' section. Under the arm is a large threaded rod and knurled knob, this is to adjust elevation. At the center of the arm is a pivot that can lock into position. This top section is mounted on a tripod, it can be removed. 2. This is a steel tripod made out of 'T' section steel. There are fixed cross braces about 40 cm fom bottom. The top has a tube section within which the upper arm mounts.Marked on one leg is "XXI". Believed to be from 21st Bn. AIF. on the top of that leg is a very small arrow head.ww1, training, .303 rifles -
Kiewa Valley Historical Society
Plate Bread & Butter, Circa 1921
This item was used by the State Electricity Commission of Victoria in their mess rooms for their workers during the construction of the Kiewa Hydro Electricity Scheme. The imprint of the year "1921" was to identify the year that the SECV was formed and relieved the private VHEC (Victorian Hydro-Electric Company). As the scheme was of such a huge, isolated and time consuming nature the feeding of its workers was quite demanding of cutlery and crockery. The use of sturdy English cups and saucers was essential. The period of construction and the isolation of the Kiewa Valley area placed heavy demand for "solid" crockery that could wear abusive handling. This period in time was one when crockery, whether for domestic or commercial use, was imported from "mother" England. This scenario was more so for governmental bodies such as rail, jails and electricity providers than domestic users. The influx of cheaper Asian crockery had not yet begun.This type of crockery item was used by the thousands of SEC Victorian staff and construction workers involved in the building of the Kiewa Hydro Electricity Scheme, over the extensive period (1938 to 1961). This was a period when Government bodies and other semi- government organisations were still tide to the "establishments" of "mother" England. It was a period in Australia's development when the Asian influence was very weak and the established ties to England and Europe was still very strong. The majority of heavy equipment and machinery was either made in England or Europe. Local expertise in dam construction and water management in alpine terrain came from migrants for England and Europe. The quality of workmanship from big steel manufacturing plants in England and Europe could not be matched from anywhere else in the developed world.This item is a white ceramic plate (bread & butter). It is made in England and is of strong and durable ceramic. The bottom of the plate is flat with edges sloping out (to position the bread) and the extended rim is to catch any spillages. The 5mm thickness of the ceramic suggests this plate belongs to a commercial kitchen/eating establishment (mess) and not a domestic dining room. The indent bottom of the plate is 5mm deep with a side curvature ratio of 2:5. The ceramic is glazed to a commercial standard (see KVHS 0128 for its saucer part of a dinner set.The seal of the State Electricity Commission Of Victoria is imprinted on the top inside rim within a curved scroll. Snuggled within the borders of the scroll is a banner with the five stars of the southern cross and an arm with a closed fist projecting from the top with five lightning bolts projecting outwards. On the underside "Vitrified sold by Cafe & Hotel Supplies Pty Ltd Dunn Bennett & Co. Ltd. Burslem Made in England"saucer, plate, secv, state electricity commission of victoria, crockery -
Kiewa Valley Historical Society
Frame - Photograph
This photograph frame with its decorative floral and Greek patterned boarder was typical of the early 1900's when photography was in the hands of the professional artist. It was in a period before the "instant" photo and required a dark room and processing liquids for development. It was therefor in a time when photographs were "shot" only at important events be they family or public occasions.This photograph frame holds and protects, part of a very significant occasion, the 90th birthday photograph of the matriarch of one of the founding families within the Kiewa Valley. The frame therefore has historical significance.This gold painted aluminium photograph frame has a glass (broken) pane within a formed inlay and two swivel clip toggles. These are installed to allow the photograph to be securely positioned within the correct alignment of the the frame.The metal front plate has seven rivets holding the cloth covered cardboard back frame to the metal front cover. The front part of the frame has sculptured wild flowers and is boarded with a Greek "key" pattern. Half way on the back panel is a rectangular swiveled stabiliser flap. See also KVHS 0093.photograph frame early 1900's, the roper family -
Flagstaff Hill Maritime Museum and Village
Equipment - Anchor, Circa 1886
The anchor is one of four that were carried by the FALLS OF HALLADALE when she was wrecked near Peterborough in 1908. This Rodger’s Anchor was raised from the wreck site by Flagstaff Hill divers (Peter Ronald, Colin Goodall and Gary Hayden) in 1974 and is on permanent outdoor display at the Maritime Village. The imposing 2-tonne artefact required a raft of fourteen 44-gallon drums to raise it from the seabed before it was towed by a crayfish boat to the wharf crane at Port Campbell for loading onto land transport. Following Lieutenant William Rodger’s patent in 1831, anchor design moved away from the separate attachment of straight arms and flat flutes to each side of a long shaft. Rodger’s innovation included the forging of both arms and their flutes as a single uniformly curved piece which was then attached to the crown of the shank by a thick horizontal bolt. The two-inch diameter hole for the securing through-bolt at the crown is clearly visible in this example, the bolt dislodged by corrosion and now missing. The FALLS OF HALLADALE was a four-masted, iron-hulled barque, built by Russell and Co at Greenock in 1866 for the Falls Line of Wright & Breakenridge, Glasgow. The ship was 275 feet long, 42 feet wide, with a 24 feet draft and weighed 2,085 tonnes. She was built to carry as much cargo as possible rather than for speed. Her unmistakably square bilge earned her the title of “warehouse-type” ship and her iron masts and wire rigging enabled her to maintain full sail even in gale conditions. In 1908, with new sails, 29 crew, and 2800 tons of cargo in her hold, the FALLS OF HALLADALE left New York, bound for Melbourne and Sydney via the Cape of Good Hope. 102 days later, at 3 am on the 14th of November, under full sail and in calm seas, with a six knots breeze behind and a misleading fog along the coast, the great vessel rose upon an ocean swell and settled on top of a shelf of rock near Peterborough. There she stayed for nearly two months until the pounding seas and dynamiting by salvagers finally broke her back, and her remains disappeared back into deeper water. The iron-hulled, four-masted barque, the Falls of Halladale, was a bulk carrier of general cargo. She left New York in August 1908 on her way to Melbourne and Sydney. In her hold, along with 56,763 tiles of unusual beautiful green American slates (roofing tiles), 5,673 coils of barbed wire, 600 stoves, 500 sewing machines, 6500 gallons of oil, 14400 gallons of benzene, and many other manufactured items, were 117 cases of crockery and glassware. Three months later and close to her destination, a navigational error caused the Falls of Halladale to be wrecked on a reef off the Peterborough headland at 3 am on the morning of the 15th of November, 1908. The captain and 29 crew members all survived, but her valuable cargo was lost, despite two salvage attempts in 1908-09 and 1910. ABOUT THE ‘FALLS OF HALLADALE’ (1886 - 1908) Built: in1886 by Russell & Co., Greenock shipyards, River Clyde, Scotland, UK. The company was founded in 1870 (or 1873) as a partnership between Joseph Russell (1834-1917), Anderson Rodger and William Todd Lithgow. During the period 1882-92 Russell & Co., standardised designs, which sped up their building process so much that they were able to build 271 ships over that time. In 1886 they introduced a 3000-ton class of sailing vessel with auxiliary engines and brace halyard winches. In 1890 they broke the world output record. Owner: Falls Line, Wright, Breakenridge & Co, 111 Union Street, Glasgow, Scotland. Configuration: Four-masted sailing ship; iron-hulled barque; iron masts, wire rigging, fore & aft lifting bridges. Size: Length 83.87m x Breadth 12.6m x Depth 7.23m, Gross tonnage 2085 ton Wrecked: the night of 14th November 1908, Curdies Inlet, Peterborough south west Victoria Crew: 29 The Falls of Halladale was a four-masted sailing ship built in 1886 in Glasgow, Scotland, for the long-distance cargo trade and was mostly used for the Pacific grain trade. She was owned by Wright, Breakenridge & Co of Glasgow and was one of several Falls Line ships, all of which were named after waterfalls in Scotland. The lines flag was of red, blue and white vertical stripes. The Falls of Halladale had a sturdy construction built to carry maximum cargo and able to maintain full sail in heavy gales, one of the last of the ‘windjammers’ that sailed the Trade Route. She and her sister ship, the Falls of Garry, were the first ships in the world to include fore and aft lifting bridges. Previous to this, heavily loaded vessels could have heavy seas break along the full length of the deck, causing serious injury or even death to those on deck. The new, raised catwalk-type decking allowed the crew to move above the deck in stormy conditions. This idea is still used today on the most modern tankers and cargo vessels and has proved to be an important step forward in the safety of men at sea. On 4th August 1908, with new sails, 29 crew, and 2800 tons of cargo, the Falls of Halladale left New York, bound for Melbourne and Sydney via the Cape of Good Hope. The cargo on board was valued at £35,000 and included 56,763 tiles of American slate roofing tiles (roof slates), 5,673 coils of barbed wire, 600 stoves, 500 sewing machines, 6,500 gallons of oil, 14,400 gallons of benzene, plumbing iron, 117 cases of crockery and glassware and many other manufactured items. The Falls of Halladale had been at sail for 102 days when, at 3 am on the night of 14th November 1908, under full sail in calm seas with a six knots breeze behind and misleading fog along the coast, the great vessel rose upon an ocean swell and settled on top of a submerged reef near Peterborough on the south-west Victoria’s coast. The ship was jammed on the rocks and began filling with water. The crew launched the two lifeboats and all 29 crew landed safely on the beach over 4 miles away at the Bay of Islands. The postmistress at Peterborough, who kept a watch for vessels in distress, saw the stranding and sent out an alert to the local people. A rescue party went to the aid of the sailors and the Port Campbell rocket crew was dispatched, but the crew had all managed to reach shore safely by the time help arrived. The ship stayed in full sail on the rocky shelf for nearly two months, attracting hundreds of sightseers who watched her slowly disintegrate until the pounding seas and dynamiting by salvagers finally broke her back, and her remains disappeared back into deeper water. The valuable cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. Further salvage operations were made from 1974-1986, during which time 22,000 slate tiles were recovered with the help of 14 oil drums to float them, plus personal artefacts, ship fittings, reams of paper and other items. The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson’s navigational error, not too technical failure of the Clyde-built ship. The shipwreck is a popular site for divers, about 300m offshore and in 3 – 15m of water. Some of the original cargo can be seen at the site, including pieces of roof slate and coils of barbed wire.The shipwreck of the FALLS OF HALLADALE is of state significance – Victorian Heritage Register No. S255. She was one of the last ships to sail the Trade Routes. She is one of the first vessels to have fore and aft lifting bridges. She is an example of the remains of an International Cargo Ship and also represents aspects of Victoria’s shipping industry. The wreck is protected as a Historic Shipwreck under the Commonwealth Historic Shipwrecks Act (1976).A large iron Rodger’s anchor recovered from the wreck of the FALLS OF HALLADALE. It has a rounded crown, curved arms and moulded flutes. Heavy duty iron stock with round eyes at either end, fitted over shank and fixed into position by a wedge-shaped metal locking pin. Shackle missing but severed securing bolt remaining in shank. The presence of an empty bolthole at the crown junction of shank and arms confirms Rodger’s type. Corroded from 66 years submersion in seawater but otherwise structure is sound.warrnambool, shipwreck coast, flagstaff hill, shipwrecked coast, flagstaff hill maritime village, flagstaff hill maritime museum, shipwreck artefact, maritime museum, falls of halladale, rodger’s anchor, peterborough reef, 1908 shipwreck, anchor, last days of sail, great clipper ships -
Flagstaff Hill Maritime Museum and Village
Leisure object - Toy Soldier, circa 1878
The toy soldier is a relic from the shipwreck of the LOCH ARD in 1878. It has a companion piece in the Flagstaff Hill collection. The toy soldier is unpainted, but the style of uniform, and the weapons carried (a musket and a basket-handled cutlass), indicate it is a representation of the Napoleonic Wars period from the beginning of the nineteenth century. Mass-produced toy soldiers made of cast metal (lead or tin) became popular during the 1800s. Heyde of Germany manufactured silhouette-shaped ‘flats’ early in the century; then Mignot of France released three-dimensional ‘solids’; and later (1893) Britain of England made ‘hollow cast’ figures. These innovations were designed to make sets of toy soldiers more affordable for middle and lower-class children, extending the market beyond the intricately made and hand-crafted replicas that were the preserve of the rich in the eighteenth century. Wooden military figures, specially carved and unpainted ones, were therefore not particularly common at the time when the LOCH ARD went down on Victoria’s southwest coast. Mignot was the first to sell unpainted soldiers, leaving their customers to fill in the colours according to their own patriotic preferences. If a similar attitude is assumed for the two virtually identical figures in the Flagstaff Hill collection, it is possible they were part of a new set intended for sale, rather than part of a passenger’s existing collection. A similarly light composite material of sawdust, glue and linseed oil (press-moulded onto a metal frame) was used by the German firm O & M Hausler to create toy soldiers, but this type of modelling was not commercialised until after 1912. The first heat-moulded plastic toy soldiers did not become available until after 1945.The toy soldier represents a 19th century child's interest in military history. The item is one of two toy soldiers recovered from the Loch Ard that are in Flagstaff Hill's collection. The shipwreck of the Loch Ard is of significance for Victoria and is registered on the Victorian Heritage Register ( S 417). Flagstaff Hill has a varied collection of artefacts from Loch Ard and its collection is significant for being one of the largest accumulation of artefacts from this notable Victorian shipwreck of which the subject items are a small part. The collections objects give us a snapshot of how we can interpret the story of this tragic event. The collection is also archaeologically significant as it represents aspects of Victoria's shipping history that allows us to interpret Victoria's social and historical themes of the time. Through is associated with the worst and best-known shipwreck in Victoria's history.An unpainted replica or toy soldier, presented in a Napoleonic Wars era uniform. The moulded figure is in a standing posture and is bearing a musket at the slope-arms position, with a sabre or cutlass slung behind. It wears a plumed helmet, short-fronted coat with longer buttoned tails at the back, button-fastened bib-front trousers, a pair of crossed bandoliers, and tasselled shoulder epaulettes. The figure is a creamy colour with red-brown stains on the head and shoulder. There is a hole in the end of the musket. The model is detailed and sharp. It was recovered from the wreck of the Loch Ard.Cataloguing numbers: “6599” on the rear of the left trouser leg “PWO 2308” on the sole of the left boot, (partially obscuring “R122” written in biro) “2218” on the sole of the right boot.flagstaff hill, warrnambool, loch ard, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, loch line, napoleonic uniform, toy soldier, replica soldier -
Bendigo Historical Society Inc.
Newspaper - JENNY FOLEY COLLECTION: EARLY DAYS
Bendigo Advertiser '' The way we were'' from 2000. Early days: it was anything goes as far as striped jumpers went in South Bendigo Football Club's early years. Football was played on rough surfaces which had holes and mud. The goal posts were timber props positioned much further apart than they are today. This team pictured helped South Bendigo win its 21st flag in 1900. Bendigo Football Association was superseded by the Bendigo Football League in 1913. The clip is in a folder.newspaper, bendigo advertiser, the way we were -
Port Melbourne Historical & Preservation Society
Photograph - Under Port Melbourne Railway, Hobsons Bay Main Sewer, "Melbourne water supply", 1890s
Three black and white images taken from: "Melbourne water supply - sewerage schemes" Special edition of the "Building, engineering and mining journal" The operations of the Melbourne and Metropolitan Board of Works. (.03) Plate XXXI. Under Port Melbourne Railway, Hobsons Bay Main Sewer, Section No 3. This view was taken in compressed air, and shows shield doors in background with men placing extra htdraulic power in position. This view also shows the method of constructing with concrete blocks and iron centreing on which to build the upper portion of the sewer.engineering - board of works, built environment - civic, mmbw, sewer, melbourne and metropolitan board of works -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Envelope with commemorative Royal Mail Millenium Special Stamp featuring image of 'Test-tube baby' sculpture by A Gormley, 1999
This stamp was part of a series of four stamps released by Royal Mail in 1999 under the subject 'The Patients' Tale'. From British Philatelic Bulletin, Volume 36 February 1999: "This 63P stamp (second step airmail letter rate) recalls techniques developed by British gynaecologist/obstetrician Patrick Steptoe (1913-88) and physiologist Robert Edwards. The popular term ‘test tube’ is inaccurate, the treatment - in vitro fertilization (ivf) involves combining egg and sperm in a glass dish with the resulting embryo being replaced in the womb. Initially developed to treat infertile women, it is now used to help men who produce few or defective sperm. It is estimated that about 7000 ivf babies have been born in Britain over the past five years." This object was retrieved from the mail room by and added to the collection in 1999 by College Archivist, Ros Winspear.A standard size white envelope with an 'AIR MAIL' sticker attached to from bottom proper RH corner, and a square grey, blue and black stamp in upper proper RH corner. The stamp is a Royal Mail Special issue stamp, beaing an image of a sculpture in a foetal position. Text on stamp reads, "63/ Millennium 1999/37/ Test tube baby/ A Gormley". The envelope is addressed to RACOG, and the sender of the envelope was 'FM McKellar/ 2 Norham End/ Norham Road/ Oxford OX205G/ United Kingdom.'in vitro fertilisation (ivf) -
Bendigo Historical Society Inc.
Photograph - Bendigo Easter Fair
The first photograph is of the Bendigo Easter Parade making its way down Mitchell Street towards High Street and Pall Mall. This photograph shows the Bendigo Chinese Association walking as part of the parade, spectators along the side of the street and shows some of the shops along Mitchel Street. The second photo is taken from a similar position and shows various lions and a drum in the foreground, with Sun Loong weaving down the street behind them. There are two army vehicles following behind Sun Loong, with spectators crowding the street behind.bendigo chinese association, sun loong, chinese dragon, bendigo easter fair, bendigo easter parade, parades., mitchell st -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, MacIntosh
Complete Macintosh laryngoscope piece with a curved large sized attached blade with light bulb and a textured handle with serrated grip for easy of use and a screw in the blade connector. The handle is also a battery deposit to supply the led light bulb. The blade has general scratches on its surface because its use. At the back of the blade is still attached the curved lamina as holder of the base with the blade in its regular use position. Several engraved and stamped inscriptions are present all over the handle and blade (see inscriptions for details). Stamped on the base of the blade, BOC Stamped on the edge of the back side blade, STAINLESS Stamped on the back side blade base, MADE IN ENGLAND Engraved at the base of the blade attachment place, MAINLAND Engraved at the edge of the serrated grip of the handle, Alfred Anaes Stamped at the base of the handle, REGD TRADE MARK / P E N L O N / MADE IN ENGLAND Stamped at the bottom of the handle base, REGD TRADE MARK / P E N L O N / MADE IN ENGLAND Engraved at the bottom of the handle base, AnaeA / ALFREDlaryngoscope, complete laryngoscope, boc, penlon, handle, alfred hospital, anaesthesia -
Whitehorse Historical Society Inc.
Equipment - Camera, c. 1915
Originally produced by Rochester Optical Co. Rochester New York, USA as No.1 Premoette Jr Patented 1903,1909,1913. Company purchased by Eastman Kodak and was still in production in 1915.Eastman Kodak BT - 8048 filmpack folding camera. Uses Kodak XX Panchromatic film pack (included with camera) -negative size 2 1/4 x 3 1/4 inches. Has viewfinder which can be used in vertical or horizontal position and has two shutter openings. Camera has three slots on the bars on which bellows are extended to adjust focal distance.|Also known as a Premoette Junior No.1. Details of patent and number stamped on the back of the Filmpak loading door.On & over the lens - Made by Eastman Kodak Co, Rochester, NY, USA.|Ball bearing Pat'd Jan 18/1910photography, cameras -
Ballarat Tramway Museum
Slide - 35mm slide/s - set of 2, Robert Thomson, 27-4-1965?
Yields information about tram 40, the Lydiard St terminus tram stop and the Sebastopol tram terminus and tram 40.Agfa blue/white mount, colour slide of tram 40 at both the Lydiard St North and Sebastopol terminus. Both over exposed photos. .1 - No. 40 early in the morning given the sun position, shows the cemetery gates and the tram stop sign on the west side of the road. The conductor is boarding and the driver is in the cabin. Tram has the destination of Sebastopol. .2 - has the tram side on, with the Royal Mail Hotel in the background. Slide not dated, but based on slide mount and views and Reg item 7483, likely to be 27-4-1965tramways, trams, lydiard st north, sebastopol, tram stops, tram 40 -
Ballarat Tramway Museum
Photograph - B&W print of donated negative - set of 3, Graham Parry, Sep. 1971
Yields information about the Gardens Loop and tram operations in 1971Set of three black and white prints and associated negatives of trams in Ballarat during 1971 prior to closure of the system by Graham Parry. All images from the scanned negative. Understood that after the closure of the Victoria St line, trams stopped at the south end of the loop before returning to Mt Pleasant. See Andrew Cook notes. .1 - No. 21 at the exit of Gardens Loop, with destination of Mt Pleasant. Tram does not appear to have the driver in position. .2 - front on photo .3 - Timetable Board at Gardens Loop.tramways, trams, wendouree parade, gardens loop, mt pleasant, timetable boards, tram 21 -
Ballarat Tramway Museum
Photograph - Colour Photograph/s, Darren Hutchesson, 8/01/1999 12:00:00 AM
Colour photograph of BTM tram 28 wheels loaded onto a John Clowes supplied trailer for transport to AETM Adelaide on 8/1/1999 for reprofiling. In photo are John Clowes (standing by car), Stephen Butler, Simon Jenkins and Alastair Reither and two other people. Trailer positioned over pit in 5 road. Used in Feb. 1999 issue of Trolley Wire, page 41. Note spelling of John Clowes name in caption is "Clowes". Photo by Darren Hutchesson. Photo on AGFA Prestige paper.On rear of photo in blue ink "8/1/99 / Car 28, wheels/axles being loaded onto John Clowes' trailer for transport to out friends at AETM St Kilda - for reprofiling. / Photo: Darren Hutchesson"wheels, 28, aetm, btm, john clowes, tram 28